ARM's PL061 has a different set of ID registers to the one in the
Luminary Stellaris; implement this so that the Linux driver can
identify the Realview PBX PL061 correctly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement some GPIO inputs which a board can connect up to set the
MMC card status bits in the MCI register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add two GPIO output pins to the PL181 model to indicate the card
present and readonly status information. On ARM boards these usually
are reflected in a system register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Update not only dbc but also dnad when skipping bytes during the MSGOUT
phase. Previously only dbc was updated which is probably wrong and
could lead to bogus message codes being read.
Tested on Linux and Windows Server 2003.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
bugfix under DOS for AMD netware driver:
AMD PCNTNW Ethernet MLID v3.10 (960115), network card not found
bugfix works well under DOS with:
1.) AMD NDIS driver v2.0.1
2.) AMD PCNTNW Ethernet MLID v3.10 (960115)
3.) Knoppix 6.2
Signed-off-by: Gerhard Wiesinger <lists@wiesinger.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
A pointer to a size_t variable was passed as the void * pointer to
lduw_p() in virtio_net_receive(). Instead of acting on the 16-bit value
this caused failure on big-endian hosts.
Avoid this issue in the future by using stw_p() instead. In general we
should use ld*_p() for loading from target memory and st*_p() for
storing to target memory anyway, not the other way around.
Also tighten up a correct use of lduw_p() when stw_p() should be used
instead in virtio_net_get_config().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
VMSTATE_PCIE_AER_ERRS is indeed useful for other emulation drivers.
Move it to hw/hw.h under the name of VMSTATE_STRUCT_VARRAY_POINTER_UINT16.
Also add VMSTATE_STRUCT_VARRAY_POINTER_INT32 which is more or less
the same as _UINT16 macro, except the fact it uses int32_t internally.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
It should be PXA2xxTimerInfo, not pxa2xx_timer_info. Replace all
occurences of old name with the new one.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
This is a _TEST variant of VMSTATE_STRUCT_ARRAY, necessary e.g.
for future patch changing pxa2xx_timer to use vmstate.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Use qdev/sysbus framework to handle pxa2xx-pic. Instead of exposing IRQs
via array, reference them via qdev_get_gpio_in().
Patch has been modified by the committer.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Final corrections for IRQ levels that are set by mst_fpga:
* Don't retranslate IRQ if previously IRQ was masked.
* After setting or clearing IRQs through register, apply mask
before setting parent IRQ level.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
VirtIOSerialDevice is like VirtIOSerialPort with just the first two
fields, which makes it pretty pointless. Using VirtIOSerialPort
directly works equally well and is less confusing.
[Amit: - rebase
- rename 'dev' to 'port' in function params in virtio-serial.h ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The SD_STATUS and SEND_NUM_WR_BLOCKS commands are supposed to cause
the card to send data back to the host. However sd.c was missing the
state change to sd_sendingdata_state for these commands, with the effect
that the Linux driver would either hang indefinitely waiting for
nonexistent data (pl181) or read zeroes and provoke a qemu warning
message (omap).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove the typedef SetIRQFunc, as it is not used by anything.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Nothing prevented IRQ sharing on the ISA bus in principle. Not all
boards supported this, neither each and every card nor driver and OS.
Still, there existed valid IRQ sharing scenarios, (at least) two of them
can also be found in QEMU: >2 PC UARTs and the PREP IDE buses.
So remove this artificial restriction from our ISA model.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The following patch adds PS/2 keyboard Scancode Set 3 support.
Signed-off-by: Roy Tam <roytam@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
RST bit is (1 << 4) bit, not (1 << 3), fix condition
that enables i2s if ENB is set and RST is not set.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add handling of 0xe0xx keycodes to pxa2xx_driver.
Extended keycodes in keymap should be marked with most significant
bit set (i.e. 0x80). Without this patch it's not possible to handle
i.e. cursor keys.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add emulation of KPAS register and proper emulation of
KPASMKP regs, so now driver supports multipresses and properly
works with Linux driver.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Acked-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
qemu makes it possible to disable link at tap which is not communicated
to the guest but causes all packets to be dropped.
When vhost-net is enabled, vhost needs to be aware of both the virtio
link_down and the peer link_down. we switch to userspace emulation when
either is down.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: pradeep <psuriset@linux.vnet.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The spec says: Any descriptor with a non-zero status byte has been
processed by the hardware, and is ready to be handled by the software.
Thus, once we change a descriptor status to non-zero we should
never move the head backwards and try to reuse this
descriptor from hardware.
This actually happened with a multibuffer packet
that arrives when we don't have enough buffers.
Fix by checking that we have enough buffers upfront
so we never need to discard the packet midway through.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The e1000 spec says: if software statically allocates
buffers, and uses memory read to check for completed descriptors, it
simply has to zero the status byte in the descriptor to make it ready
for reuse by hardware. This is not a hardware requirement (moving the
hardware tail pointer is), but is necessary for performing an in–memory
scan.
Thus the guest does not have to clear the status byte. In case it
doesn't we need to clear EOP for all descriptors
except the last. While I don't know of any such guests,
it's probably a good idea to stick to the spec.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
e1000 supports multi-buffer packets larger than rxbuf_size.
This fixes the following (on linux):
- in guest: ifconfig eth1 mtu 16110
- in host: ifconfig tap0 mtu 16110
ping -s 16082 <guest-ip>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Turn fdc_init_isa into an inline function.
Get floppy geometry directly from the drives.
Don't expose FDCtrl.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Other geometry guessing functions already reside in block.c.
Remove some unused or debugging only fields.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Now the only user of mainstone.h is mainstone.c file. Merge header
into board file.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Simplify IRQ handling to stop setting an input irq pin. As a win, also get
correct IRQ status after save/load cycle.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
TPR blocks all interrupts in a priority class, so simple "less or
equal" check is not enough.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If kvmclock is used, which implies the kernel supports it, register a
kvmclock device with the sysbus. Its main purpose is to save and restore
the kernel state on migration, but this will also allow to visualize it
one day.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Glauber Costa <glommer@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In order to use log_start/log_stop with Xen as well in the vga code,
this two operations have been put in CPUPhysMemoryClient.
The two new functions cpu_physical_log_start,cpu_physical_log_stop are
used in hw/vga.c and replace the kvm_log_start/stop. With this, vga does
no longer depends on kvm header.
[ Jan: rebasing and style fixlets ]
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Define and use dedicated constants for vm_stop reasons, they actually
have nothing to do with the EXCP_* defines used so far. At this chance,
specify more detailed reasons so that VM state change handlers can
evaluate them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
1) Move GPIO-related functionality to qdev. Now one can use directly
qdev_get_gpio_in()/qdev_connect_gpio_out() on max7310 devices.
2) Make reset to be called through qdev.reset callback.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
The host part of a block device can be deleted with in progress
block migration.
To fix this, add a reference count to DriveInfo, freeing resources
on last reference.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Different AHCI controllers have a different number of ports, so the core
shouldn't care about the amount of ports available.
This patch makes the number of ports available to the AHCI core runtime
configurable, allowing us to have multiple different AHCI implementations
with different amounts of ports.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The ahci code was missing its soft reset functionality. This wasn't really an
issue for Linux guests, but Windows gets confused when the controller doesn't
reset when it tells it so.
Using this patch I can now successfully boot Windows 7 from AHCI using AHCI
enabled SeaBIOS.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The drive sends a d2h init fis on initialization. Usually, the guest doesn't
receive fises yet at that point though, so the delivery is deferred.
Let's reflect that by sending the init fis on fis receive enablement.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sebastian's patch already did a pretty good job at splitting up ICH-9
AHCI code and the AHCI core. We need some more though. Copyright was missing,
the lspci dump belongs to ICH-9, we don't need the AHCI core to have its
own qdev device duplicate.
So let's split them a bit more in this patch, making things easier to
read an understand.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Due to popular request, this patch adds a license header to ahci.h
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are multiple ahci devices out there. The currently implemented ich-9
is only one of the many. So let's split that one out into a separate file
to stress the difference.
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix a few style issues and convert magic numbers into prober symbolic
constants, also fixing the wrong but unused IOAPIC_DM_SIPI value.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu-kvm carries the IOAPIC base address in its v2 vmstate. We only
support the default base address so far, and saving even that in the
device state was rejected.
Add a padding field to be able to read qemu-kvm's old state, but
increase our version to 3, indicating that we are not saving a valid
address. This also gives downstream the chance to change to stop
evaluating the base_address and move to v3 as well.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a guest modifiable state that must be saved/restored properly.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add the missing EOI broadcast from local APIC to the IOAPICs on
completion of level-triggered IRQs. This ensures that a still asserted
IRQ source properly re-triggers an APIC IRQ.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This can happen if a port gets unplugged before guest has chance to
initialise vqs.
Reported-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When MSI is off, each interrupt needs to be bounced through the io
thread when it's set/cleared, so vhost-net causes more context switches and
higher CPU utilization than userspace virtio which handles networking in
the same thread.
We'll need to fix this by adding level irq support in kvm irqfd,
for now disable vhost-net in these configurations.
Added a vhostforce flag to force vhost-net back on.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The Ubuntu 10.10 gcc for ARM complains that we might be overrunning
the cpu_irqs[][] array: silence this by correcting the bounds on the
loop. (In fact we would not have overrun the array because bit
MAX_PILS in pil_pending and irl_out will always be 0.)
Also add a comment about why the loop's lower bound is OK.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The "leon3_cache_control_int" (op_helper.c) function is called within leon3.c
which leads to segfault error with the global "env".
Now cache control is a CPU feature and everything is handled in op_helper.c.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
