This follows the corresponding change for e1000e. This fixes:
tests/avocado/netdev-ethtool.py:NetDevEthtool.test_igb
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In MSI-X mode, if there are interrupts already notified but not cleared
and a new interrupt arrives, e1000e incorrectly notifies the notified
ones again along with the new one.
To fix this issue, replace e1000e_update_interrupt_state() with
two new functions: e1000e_raise_interrupts() and
e1000e_lower_interrupts(). These functions don't only raise or lower
interrupts, but it also performs register writes which updates the
interrupt state. Before it performs a register write, these function
determines the interrupts already raised, and compares with the
interrupts raised after the register write to determine the interrupts
to notify.
The introduction of these functions made tracepoints which assumes that
the caller of e1000e_update_interrupt_state() performs register writes
obsolete. These tracepoints are now removed, and alternative ones are
added to the new functions.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
e1000e and igb employs NetPktRssIpV6TcpEx for RSS hash if TcpIpv6 MRQC
bit is set. Moreover, igb also has a MRQC bit for NetPktRssIpV6Tcp
though it is not implemented yet. Rename it to TcpIpv6Ex to avoid
confusion.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This saves some code and enables tracepoint for e1000's VLAN filtering.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use PFRSTD to reset RSTI bit for VFs, and raise VFLRE interrupt when VF
is reset.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This change introduces emulation for the Intel 82576 adapter, AKA igb.
The details of the device will be provided by the documentation that
will follow this change.
This initial implementation of igb does not cover the full feature set,
but it selectively implements changes necessary to pass tests of Linut
Test Project, and Windows HLK. The below is the list of the implemented
changes; anything not listed here is not implemented:
New features:
- igb advanced descriptor handling
- Support of 16 queues
- SRRCTL.BSIZEPACKET register field
- SRRCTL.RDMTS register field
- Tx descriptor completion writeback
- Extended RA registers
- VMDq feature
- MRQC "Multiple Receive Queues Enable" register field
- DTXSWC.Loopback_en register field
- VMOLR.ROMPE register field
- VMOLR.AUPE register field
- VLVF.VLAN_id register field
- VLVF.VI_En register field
- VF
- Mailbox
- Reset
- Extended interrupt registers
- Default values for IGP01E1000 PHY registers
Removed features:
- e1000e extended descriptor
- e1000e packet split descriptor
- Legacy descriptor
- PHY register paging
- MAC Registers
- Legacy interrupt timer registers
- Legacy EEPROM registers
- PBA/POEM registers
- RSRPD register
- RFCTL.ACKDIS
- RCTL.DTYPE
- Copper PHY registers
Misc:
- VET register format
- ICR register format
Signed-off-by: Gal Hammer <gal.hammer@sap.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
[Jason: don't abort on msi(x)_init()]
Signed-off-by: Jason Wang <jasowang@redhat.com>
igb, a new network device emulation, will need SCTP checksum offloading.
Currently eth_get_protocols() has a bool parameter for each protocol
currently it supports, but there will be a bit too many parameters if
we add yet another protocol.
Introduce an enum type, EthL4HdrProto to represent all L4 protocols
eth_get_protocols() support with one parameter.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The values returned by eth_get_protocols() are used to perform RSS,
checksumming and segmentation. Even when a packet signals the use of the
protocols which these operations can be applied to, the headers for them
may not be present because of too short packet or fragmentation, for
example. In such a case, the operations cannot be applied safely.
Report the presence of headers instead of whether the use of the
protocols are indicated with eth_get_protocols(). This also makes
corresponding changes to the callers of eth_get_protocols() to match
with its new signature and to remove redundant checks for fragmentation.
Fixes: 75020a7021 ("Common definitions for VMWARE devices")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Whether a packet will be written back to the guest depends on the
remaining space of the queue. Therefore, e1000e_rx_written_to_guest and
e1000e_rx_not_written_to_guest should log the index of the queue instead
of generated interrupts. This also removes the need of
e1000e_rx_rss_dispatched_to_queue, which logs the queue index.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When virtio-net header is not set, net_rx_pkt_get_vhdr() returns
zero-filled virtio_net_hdr, which is actually valid. In fact, tap device
uses zero-filled virtio_net_hdr when virtio-net header is not provided
by the peer. Therefore, we can just remove net_rx_pkt_has_virt_hdr() and
always assume NetTxPkt has a valid virtio-net header.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is part of recent efforts of refactoring e1000 and e1000e.
DeviceClass's reset member is deprecated so migrate to ResettableClass.
There is no behavioral difference.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
They are duplicate of running throttling timer flags and incomplete as
the flags are not cleared when the interrupts are fired or the device is
reset.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In section 7.4.3 of the 82574 datasheet it states that
"In systems that do not support MSI-X, reading the ICR
register clears it's bits..."
Some OSes rely on this.
Signed-off-by: Nick Hudson <skrll@netbsd.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Message-Id: <20210625065401.30170-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJgrwypAAoJEO8Ells5jWIRDfsIAJyrDUbgDoeg4dM9TEvE+3xr
5Fd52wVozlQhn6zz2ZfEcqVfWNVbVHsVcYnpJQMXOCda5CIl5qZbl2EzS/lBrdkm
f5XUD4lFhwH1pUUugT20lEFYct0dv2UddEmLrEctI+CB5d9bA+SqeDdLAHYbrDIR
jfc/vOrP/1sfvWCsXmZzJ+0UhoGoS8qU2eLx9nwSvan3uLMmLWfWSTUltvwMNvZD
oA6a1O9poV00W89W25tSeMOKKPaS+RZYVFvDd0HzQYRI0t496VxK/Jw0VqfF+iCl
3KBzjhUi7QyFWgQY5xFQcMWwob8McOJOUGX4EQERm8EbHy8VhpugCHinqLPqf38=
=fRpo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Thu 27 May 2021 04:06:17 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap-bsd: Remove special casing for older OpenBSD releases
virtio-net: failover: add missing remove_migration_state_change_notifier()
hw/net/imx_fec: return 0xffff when accessing non-existing PHY
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If a PHY does not exist, attempts to read from it should return 0xffff.
Otherwise the Linux kernel will believe that a PHY is there and select
the non-existing PHY. This in turn will result in network errors later
on since the real PHY is not selected or configured.
Since reading from or writing to a non-existing PHY is not an emulation
error, replace guest error messages with traces.
Fixes: 461c51ad42 ("Add a phy-num property to the i.MX FEC emulator")
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
This is a 10/100 ethernet device that has several features.
Only the ones needed by the Linux driver have been implemented.
See npcm7xx_emc.c for a list of unimplemented features.
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com>
Signed-off-by: Doug Evans <dje@google.com>
Message-id: 20210218212453.831406-2-dje@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need a solution to use an Ethernet PHY that is not the first device
on the MDIO bus (device 0 on MDIO bus).
As an example with the i.MX6UL the NXP SOC has 2 Ethernet devices but
only one MDIO bus on which the 2 related PHY are connected but at unique
addresses.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: a1a5c0e139d1c763194b8020573dcb6025daeefa.1593296112.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: Fixed 32-bit format string using PRIx32/PRIx64]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Allwinner Sun8i System on Chip family includes an Ethernet MAC (EMAC)
which provides 10M/100M/1000M Ethernet connectivity. This commit
adds support for the Allwinner EMAC from the Sun8i family (H2+, H3, A33, etc),
including emulation for the following functionality:
* DMA transfers
* MII interface
* Transmit CRC calculation
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-10-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for following hash types:
IPV6 TCP with extension headers
IPV4 UDP
IPV6 UDP
IPV6 UDP with extension headers
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
LASI is a built-in multi-I/O chip which supports serial, parallel,
network (Intel i82596 Apricot), sound and other functionalities.
LASI has been used in many HP PARISC machines.
This patch adds the necessary parts to allow Linux and HP-UX to detect
LASI and the network card.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-3-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This adds the basic functionality to emulate a Tulip NIC.
Implemented are:
- RX and TX functionality
- Perfect Frame Filtering
- Big/Little Endian descriptor support
- 93C46 EEPROM support
- LXT970 PHY
Not implemented, mostly because i had no OS using these functions:
- Imperfect frame filtering
- General Purpose Timer
- Transmit automatic polling
- Boot ROM support
- SIA interface
- Big/Little Endian data buffer conversion
Successfully tested with the following Operating Systems:
- MSDOS with Microsoft Network Client 3.0 and DEC ODI drivers
- HPPA Linux
- Windows XP
- HP-UX
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191022155413.4619-1-svens@stackframe.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
On very busy networks connected via a tap interface, it is possible to overflow
the RX descriptor ring in the time between the client driver enabling the RX
MAC and finishing writing the final configuration to the NIC registers.
Ensure that we detect this condition and update the status register accordingly
to indicate an overflow has occurred (and the incoming packet dropped) in order
to prevent the client driver becoming confused.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of cleanup-trace-events.pl. Same funnies as in the
previous commit, of course. Manually shorten its change to
linux-user/trace-events to */signal.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-6-armbru@redhat.com
Message-Id: <20190314180929.27722-6-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Expose the virtio-net self announcement capability and allow
qemu_announce_self() to call it.
These announces are caused by something external (i.e. the
announce-self command); they won't trigger if the migration
counter is triggering announces at the same time.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Switch virtio's self announcement to use the AnnounceTimer.
It keeps it's own AnnounceTimer (per device), and starts running it
using a migration post-load and a virtual clock; that way the
announce happens once the guest is actually running.
The timer uses the migration parameters to set the timing of
the repeats.
Based on earlier patches by myself and
Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The e1000 emulation silently discards RX packets if there's
insufficient space in the ring buffer. This leads to errors
on higher-level protocols in the guest, with no indication
about the error cause.
This patch increments the "Missed Packets Count" (MPC) and
"Receive No Buffers Count" (RNBC) HW counters in this case.
As the emulation has no FIFO for buffering packets that can't
immediately be pushed to the guest, these two registers are
practically equivalent (see 10.2.7.4, 10.2.7.33 in
https://www.intel.com/content/www/us/en/embedded/products/networking/82574l-gbe-controller-datasheet.html).
On a Linux guest, the register content will be reflected in
the "rx_missed_errors" and "rx_no_buffer_count" stats from
"ethtool -S", and in the "missed" stat from "ip -s -s link show",
giving at least some hint about the error cause inside the guest.
If the cause is known, problems like this can often be avoided
easily, by increasing the number of RX descriptors in the guest
e1000 driver (e.g under Linux, "e1000.RxDescriptors=1024").
The patch also adds a qemu trace message for this condition.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The only difference between our implementation of the pcnet ioport
accessors and the mmio accessors is that the former check BCR_DWIO to
see what access widths are permitted for addresses in the aprom range
(0x0..0xf). In fact our failure to do this in the mmio accessors
is a bug (one which was fixed for the ioport accessors in
commit 7ba7974197 in 2011).
The data sheet for the Am79C970A does not describe the DWIO
bit as only applying for I/O space mapped I/O resources and
not memory mapped I/O resources, and our MMIO accessors already
honour DWIO for accesses in the 0x10..0x1f range (since the
pcnet_ioport_{read,write}{w,l} functions check it).
The data sheet for the later but compatible Am79C976 is clearer:
it states specifically "DWIO mode applies to both I/O- and
memory-mapped acceses." This seems to be reasonable evidence
in favour of interpretating the Am79C970A spec as being the same.
(NB: Linux's pcnet driver only supports I/O accesses, so the
MMIO access part of this device is probably untested anyway.)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the pcnet-pci device away from using the old_mmio
MemoryRegionOps accessor functions.
This commit is a no-behaviour-change API conversion.
(Since PCNET_PNPMMIO_SIZE is 0x20, the old "addr & 0x10"
check and the new "addr < 0x10" check are exact opposites;
the new code is phrased to be parallel with the
pcnet_io_read/write functions.)
I have left a TODO comment marker because the similarity
between the MMIO and IO accessor behaviour is suspicious
and they could be combined, but this will be left to a
different patch.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Enable it by default for the sparc64-softmmu configuration.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
This adds a simplistic emulation of the Sun GEM ethernet controller
found in Apple ASICs.
Currently we only support the Apple UniNorth 1.x variant, but the
other Apple or Sun variants should mostly be a matter of adding
PCI IDs options.
We have a very primitive emulation of a single Broadcom 5201 PHY
which is supported by the MacOS driver.
This model brings out-of-the-box networking to MacOS 9, and all
versions of OS X I tried with the mac99 platform.
Further improvements from Mark:
- Remove sungem.h file, moving constants into sungem.c as required
- Switch to using tracepoints for debugging
- Split register blocks into separate memory regions
- Use arrays in SunGEMState to hold register values
- Add state-saving support
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In trace format '#' flag of printf is forbidden. Fix it to '0x%'.
This patch is created by the following:
check that we have a problem
> find . -name trace-events | xargs grep '%#' | wc -l
56
check that there are no cases with additional printf flags before '#'
> find . -name trace-events | xargs grep "%[-+ 0'I]+#" | wc -l
0
check that there are no wrong usage of '#' and '0x' together
> find . -name trace-events | xargs grep '0x%#' | wc -l
0
fix the problem
> find . -name trace-events | xargs sed -i 's/%#/0x%/g'
[Eric Blake noted that xargs grep '%[-+ 0'I]+#' should be xargs grep
"%[-+ 0'I]+#" instead so the shell quoting is correct.
--Stefan]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170731160135.12101-3-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There are a number of unused trace events that
scripts/cleanup-trace-events.pl finds. The "hw/vfio/pci-quirks.c"
filename was typoed and "qapi/qapi-visit-core.c" was missing the qapi/
directory prefix.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170126171613.1399-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
CTRL_EXT.EIAME bit controls clearing of IAM bits,
but current code clears IMS bits instead.
See spec. 10.2.2.5 Extended Device Control Register.
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Move all trace-events for files in the hw/net/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-11-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
