Migrate the bstate, tb and singlestep_enabled fields
from DisasContext into the base.
Tested-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have pre-computed the next instruction address into
dc->base.pc_next, so we might as well use it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move handle_instruction into nios2_tr_translate_insn
as the only caller.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Direct assignments to env during translation do not work.
As it happens, the only way we can get here is if env->pc
is already set to dc->pc. We will trap on the first insn
we execute anywhere on the page.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Migrate the is_jmp, tb and singlestep_enabled fields from
DisasContext into the base. Use pc_first instead of tb->pc.
Increment pc_next prior to decode, leaving the address of
the current insn in dc->pc.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not need to copy this into DisasContext.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not need to copy this into DisasContext.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only semantic of DISAS_TB_JUMP is that we've done goto_tb,
which is the same as DISAS_NORETURN -- we've exited the tb.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-5-git-send-email-tsimpson@quicinc.com>
Previously the store-conditional code was writing to hex_pred[prednum].
Then, the fGEN_TCG override was reading from there to the destination
variable so that the packet commit logic would handle it properly.
The correct implementation is to write to the destination variable
and don't have the extra read in the override.
Remove the unused arguments from gen_store_conditional[48]
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-4-git-send-email-tsimpson@quicinc.com>
Y4_l2fetch == l2fetch(Rs32, Rt32)
Y5_l2fetch == l2fetch(Rs32, Rtt32)
The semantics for these instructions are present, but the encodings
are missing.
Note that these are treated as nops in qemu, so we add overrides.
Test case added to tests/tcg/hexagon/misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-3-git-send-email-tsimpson@quicinc.com>
Change fLSBNEW/fLSBNEW0/fLSBNEW1 from copy to "x & 1"
Remove gen_logical_not function
Clean up fLSBNEWNOT to use andi-1 followed by xori-1
Test cases added to tests/tcg/hexagon/misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-2-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210628121133.193984-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a convenient macro, that works for qemu_memalign() like
g_autofree works with g_malloc.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210628121133.193984-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds new tests in which we use x-blockdev-reopen to change
bs->file
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210610120537.196183-10-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the x-blockdev-reopen was added it allowed reconfiguring the
graph by replacing backing files, but changing the 'file' option was
forbidden. Because of this restriction some operations are not
possible, notably inserting and removing block filters.
This patch adds support for replacing the 'file' option. This is
similar to replacing the backing file and the user is likewise
responsible for the correctness of the resulting graph, otherwise this
can lead to data corruption.
Signed-off-by: Alberto Garcia <berto@igalia.com>
[vsementsov: bdrv_reopen_parse_file_or_backing() is modified a lot]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610120537.196183-9-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's used only in bdrv_reopen_commit(). "backing" is covered by the
loop through all children except for case when we removed backing child
during reopen.
Make it more obvious and drop extra boolean field: qdict_del will not
fail if there is no such entry.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610120537.196183-8-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move supports_backing check of bdrv_reopen_parse_backing to called
(through bdrv_set_backing_noperm()) bdrv_set_file_or_backing_noperm()
function. The check applies to general case, so it's appropriate for
bdrv_set_file_or_backing_noperm().
We have to declare backing support for two test drivers, otherwise new
check fails.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610120537.196183-7-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The logic around finding overlay here is not obvious. Actually it does
two simple things:
1. If new bs is already in backing chain, split from parent bs by
several implicit filters we are done, do nothing.
2. Otherwise, don't try to replace implicit filter.
Let's rewrite this in more obvious way.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610120537.196183-6-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_set_backing_noperm() takes care of it (actual check is in
bdrv_set_file_or_backing_noperm()), so we don't need to check it here.
While being here, improve error message a bit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610120537.196183-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We don't need this check: bdrv_set_backing_noperm() will do it anyway
(actually in bdrv_attach_child_common()).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610120537.196183-4-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To be used for reopen in future commit.
Notes:
- It seems OK to update inherits_from if new bs is recursively inherits
from parent bs. Let's just not check for backing_chain_contains, to
support file child of non-filters.
- Simply check child->frozen instead of
bdrv_is_backing_chain_frozen(), as we really interested only in this
one child.
- Role determination of new child is a bit more complex: it remains
the same for backing child, it's obvious for filter driver. But for
non-filter file child let's for now restrict to only replacing
existing child (and keeping its role).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610120537.196183-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To be used for reopen in future commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610120537.196183-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210610112618.127378-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have bdrv_replace_child() wrapper on bdrv_replace_child_noperm().
But bdrv_replace_child() doesn't update permissions. It's rather
strange, as normally it's expected that foo() should call foo_noperm()
and update permissions.
Let's rename and add comment.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210610112618.127378-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When creating an image file with a backing file, we generally try to
open the backing file (unless -u was specified), mostly to verify that
it is there, but also to get the file size if none was specified for the
new image.
For neither of these things do we need data I/O, and so we can pass
BDRV_O_NO_IO when opening the backing file. This allows us to open even
encrypted backing images without requiring the user to provide a secret.
This makes the -u switch in iotests 189 and 198 unnecessary (and the
$size parameter), so drop it, because this way we get regression tests
for this patch here.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/441
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210622140030.212487-1-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No need to start a tracked request that will always fail. The choice
to check read-only after bdrv_inc_in_flight() predates 1bc5f09f2e
(block: Use tracked request for truncate), but waiting for serializing
requests can make the effect more noticeable.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210609163034.997943-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 3108a15cf (block: introduce bdrv_drop_filter()) introduced
uninitialized variable to_cow_parent in bdrv_replace_node_common
function that is used only when detach_subchain is true. It is used in
two places. First if block properly initialize the variable and second
block use it.
However, compiler may treat these two blocks as two independent cases so
it thinks first block can fail test and second one pass (although both
use same condition). This cause warning that variable can be
uninitialized in second block.
The warning was observed with GCC 8.4.1 and 11.0.1.
To prevent this warning, initialize the variable with NULL.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-Id: <1162368493.17178530.1620201543649.JavaMail.zimbra@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- Provide a proper PCI-ISA bridge
- Set PCI device IDs correctly
- Pass -nographic flag to PALcode
- Update PALcode to set up the Console Terminal Block
- Honor the Floating-point ENable bit during translate.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmDZ3eAdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV88Zgf/VZd2H9Wm3zUmV8VX
u9IlGuG1GROnMA8w+XakKrjKKuRdE/y3tm9vy1cGtYvekrcrHJcQpjouya6hNhWz
isqStmRDMiSLZ5kPdrnIaJ3+TOmUcp+ZXdxtsW6iZgO/knOeGFxbeZ35kG/6gmvN
AYYegK0vOmCD+Bh9QtlHItDvmCXGQQxWnjlLkRatA0HEoXHLI1r7W3oxCxFF9Hu9
3w/Tvp8rbK7oyVHCVb1ULCTJj4cwl8ZAN/509lUGy9FSZwcLKTi45k0EgAw+yuE8
3HZoON6ZyjvC++cUFJbArJGUEY78QIJWGdtMl1yIJh3V+Jp/shSaKRWSwN7p8kGf
QfVa8Q==
=XV4L
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-axp-20210628' into staging
Fixes for NetBSD/alpha:
- Provide a proper PCI-ISA bridge
- Set PCI device IDs correctly
- Pass -nographic flag to PALcode
- Update PALcode to set up the Console Terminal Block
- Honor the Floating-point ENable bit during translate.
# gpg: Signature made Mon 28 Jun 2021 15:34:08 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth-gitlab/tags/pull-axp-20210628:
target/alpha: Honor the FEN bit
pc-bios: Update the palcode-clipper image
hw/alpha: Provide a PCI-ISA bridge device node
hw/alpha: Provide console information to the PALcode at start-up
hw/alpha: Set minimum PCI device ID to 1 to match Clipper IRQ mappings
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jakub noticed[1] that, when using pin-based interrupts, the device will
unconditionally deasssert when any CQEs are acknowledged. However, the
pin should not be deasserted if other completion queues still holds
unacknowledged CQEs.
The bug is an artifact of commit ca247d3509 ("hw/block/nvme: fix
pin-based interrupt behavior") which fixed one bug but introduced
another. This is the third time someone tries to fix pin-based
interrupts (see commit 5e9aa92eb1 ("hw/block: Fix pin-based interrupt
behaviour of NVMe"))...
Third time's the charm, so fix it, again, by keeping track of how many
CQs have unacknowledged CQEs and only deassert when all are cleared.
[1]: <20210610114624.304681-1-jakub.jermar@kernkonzept.com>
Cc: qemu-stable@nongnu.org
Fixes: ca247d3509 ("hw/block/nvme: fix pin-based interrupt behavior")
Reported-by: Jakub Jermář <jakub.jermar@kernkonzept.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Qiang Liu reported that an access on an unknown address is triggered in
memory_region_set_enabled because a check on CAP.PMRS is missing for the
PMRCTL register write when no PMR is configured.
Cc: qemu-stable@nongnu.org
Fixes: 75c3c9de96 ("hw/block/nvme: disable PMR at boot up")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/362
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
In the documentation of the '-detached' param "be" and "not" has been
used side by side, fix that.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add the controller identifiers list CNS 0x13, available list of ctrls
in NVM Subsystem that may or may not be attached to namespaces.
In Identify Ctrl List of the CNS 0x12 and 0x13 no endian conversion
for the nsid field.
These two CNS values shows affect when there exists a Subsystem.
Added condition if there is no Subsystem return invalid field in
command.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This partially reverts commit 98f84f5a4e.
Since all "multi aio" commands are now reimplemented to properly track
the nested aiocbs, we can revert the "hack" that was introduced to make
sure all requests we're properly drained upon sq deletion.
The revert is partial since we keep the assert that no outstanding
requests remain on the submission queue after the explicit cancellation.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch, the aios associated with broadcast format are
submitted anonymously (no aiocb reference saved from the blk_aio call).
Fix this by formatting the namespaces one after another, saving a
reference to the aiocb for each.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch, the aios associated with zone reset are submitted
anonymously (no reference saved to the aiocb from the blk_aio call).
Fix this by resetting the zones one after another, saving a reference to
the aiocb for each reset.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Before this patch the code would issue several aios simultaneously
without saving a reference to the aiocb. Without the aiocb reference the
individual copies cannot be canceled.
Fix this by issuing copies of the ranges one after another.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Some commands report additional useful information in dw0 and dw1 of the
completion queue entry.
Add them to the trace.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
The nvme_check_prinfo() and nvme_dif_check() functions operate on the
16 bit "control" member of the NvmeCmd. These functions do not otherwise
operate on an NvmeCmd or an NvmeRequest, so change them to expect the
actual 4 bit PRINFO field and add constants that work on this field as
well.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Make nvme_get_zone_by_slba() return NULL if the slba is out of range.
This allows the function to be used without guarding the call with a
call to nvme_check_bounds(), in preparation for the next patch.
Add asserts after calling nvme_get_zone_by_slba() instead.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prepare nvme_dif_pract_generate_dif() and nvme_dif_check() to be
callable in smaller increments by making the reftag a pointer parameter
updated by the function.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch, a loop was used to issue multiple "fire and forget"
aios for each range in the command. Without a reference to the aiocb
returned from the blk_aio_pdiscard calls, the aios cannot be canceled.
Fix this by processing the ranges one after another.
As a bonus, this fixes how metadata is cleared (i.e. we only zero it out
if the data was succesfully discarded).
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Pull the gist of nvme_check_dulbe() into a helper function. This is in
preparation for dsm refactoring.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch, a broadcast flush would result in submitting
multiple "fire and forget" aios (no reference saved to the aiocbs
returned from the blk_aio_flush calls).
Fix this by issuing the flushes one after another.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
On machines with version > 6.0 replace a missing EUI-64 by a generated
value.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
The EUI-64 field is the only identifier for NVMe namespaces in UEFI device
paths. Add a new namespace property "eui64", that provides the user the
option to specify the EUI-64.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
As per the TP 4056d Namespace types CNS 0x00 and CNS 0x11
CSI field shouldn't use but it is being used for these two
Identify command CNS values, fix that.
Remove 'nvme_csi_has_nvm_support()' helper as suggested by
Klaus we can safely assume NVM command set support for all
namespaces.
Suggested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
In the Zoned Namespace Command Set Specification, chapter
2.5.1 Managing resources
"The controller may transition zones in the ZSIO:Implicitly Opened state
to the ZSC:Closed state for resource management purposes."
The word may in this sentence means that automatically transitioning
an implicitly opened zone to closed is completely optional.
Add a new parameter so that the user can control if this automatic
transitioning should be performed or not.
Being able to control this can help with verifying that e.g. a user-space
program behaves properly even without this optional ZNS feature.
The default value is set to true, in order to not change the existing
behavior.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
[k.jensen: moved parameter to controller]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
