If the debug register is not enabled, we need
do nothing besides update the register.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Bit 10 of DR7 is documented as always set to 1, so ensure that's
always the case.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Before the last patch, we had an efficient loop that disabled
local breakpoints on task switch. Re-add that, but in a more
general way that handles changes to the global enable bits too.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This moves the last of the iteration over breakpoints into
the bpt_helper.c file. This also allows us to make several
breakpoint functions static.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The host cache information may not make sense for the guest if the VM
CPU topology doesn't match the host CPU topology. To make sure we won't
expose broken cache information to the guest, disable cache info
passthrough by default, and add a new "host-cache-info" property that
can be used to enable the old behavior for users that really need it.
Cc: Benoît Canet <benoit@irqsave.net>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Processors up to the Pentium (says Bochs---I do not have old enough
manuals) require a 32KiB alignment for the SMBASE, but newer processors
do not need that, and Tiano Core will use non-aligned SMBASE values.
Reported-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
According to Microsoft documentation, the signature in the standard
hypervisor CPUID leaf at 0x40000000 identifies the Vendor ID and is
for reporting and diagnostic purposes only. We can therefore allow
the user to change it to whatever they want, within the 12 character
limit. Add a new hv-vendor-id option to the -cpu flag to allow
for this, ex:
-cpu host,hv_time,hv-vendor-id=KeenlyKVM
Link: http://msdn.microsoft.com/library/windows/hardware/hh975392
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <20151016153356.28104.48612.stgit@gimli.home>
[Adjust error message to match the property name, use error_report. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The functions for checking xcrs, xsave and pit_state2 are
only used on x86, so they should reside in target-i386/kvm.c.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1444933820-6968-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In-kernel ITS emulation on ARM64 will require to supply requester IDs.
These IDs can now be retrieved from the device pointer using new
pci_requester_id() function.
This patch adds pci_dev pointer to KVM GSI routing functions and makes
callers passing it.
x86 architecture does not use requester IDs, but hw/i386/kvm/pci-assign.c
also made passing PCI device pointer instead of NULL for consistency with
the rest of the code.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-Id: <ce081423ba2394a4efc30f30708fca07656bc500.1444916432.git.p.fedin@samsung.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HV_X64_MSR_VP_RUNTIME msr used by guest to get
"the time the virtual processor consumes running guest code,
and the time the associated logical processor spends running
hypervisor code on behalf of that guest."
Calculation of that time is performed by task_cputime_adjusted()
for vcpu task by KVM side.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <1442397584-16698-4-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V features bit HV_X64_MSR_VP_INDEX_AVAILABLE value is
based on cpu option "hv-vpindex" and kernel support of
HV_X64_MSR_VP_INDEX.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <1442397584-16698-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HV_X64_MSR_RESET msr is used by Hyper-V based Windows guest
to reset guest VM by hypervisor. This msr is stateless so
no migration/fetch/update is required.
This code checks cpu option "hv-reset" and support by
kernel. If both conditions are met appropriate Hyper-V features
cpuid bit is set.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <1442397584-16698-2-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several devices don't survive object_unref(object_new(T)): they crash
or hang during cleanup, or they leave dangling pointers behind.
This breaks at least device-list-properties, because
qmp_device_list_properties() needs to create a device to find its
properties. Broken in commit f4eb32b "qmp: show QOM properties in
device-list-properties", v2.1. Example reproducer:
$ qemu-system-aarch64 -nodefaults -display none -machine none -S -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 4, "major": 2}, "package": ""}, "capabilities": []}}
{ "execute": "qmp_capabilities" }
{"return": {}}
{ "execute": "device-list-properties", "arguments": { "typename": "pxa2xx-pcmcia" } }
qemu-system-aarch64: /home/armbru/work/qemu/memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.
Aborted (core dumped)
[Exit 134 (SIGABRT)]
Unfortunately, I can't fix the problems in these devices right now.
Instead, add DeviceClass member cannot_destroy_with_object_finalize_yet
to mark them:
* Hang during cleanup (didn't debug, so I can't say why):
"realview_pci", "versatile_pci".
* Dangling pointer in cpus: most CPUs, plus "allwinner-a10", "digic",
"fsl,imx25", "fsl,imx31", "xlnx,zynqmp", because they create such
CPUs
* Assert kvm_enabled(): "host-x86_64-cpu", host-i386-cpu",
"host-powerpc64-cpu", "host-embedded-powerpc-cpu",
"host-powerpc-cpu" (the powerpc ones can't currently reach the
assertion, because the CPUs are only registered when KVM is enabled,
but the assertion is arguably in the wrong place all the same)
Make qmp_device_list_properties() fail cleanly when the device is so
marked. This improves device-list-properties from "crashes, hangs or
leaves dangling pointers behind" to "fails". Not a complete fix, just
a better-than-nothing work-around. In the above reproducer,
device-list-properties now fails with "Can't list properties of device
'pxa2xx-pcmcia'".
This also protects -device FOO,help, which uses the same machinery
since commit ef52358 "qdev-monitor: include QOM properties in -device
FOO, help output", v2.2. Example reproducer:
$ qemu-system-aarch64 -machine none -device pxa2xx-pcmcia,help
Before:
qemu-system-aarch64: .../memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.
After:
Can't list properties of device 'pxa2xx-pcmcia'
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Green <green@moxielogic.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Jia Liu <proljc@gmail.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-ppc@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1443689999-12182-10-git-send-email-armbru@redhat.com>
It is no longer used, so tidy up everything reached by it.
This includes the gen_opc_* arrays, the search_pc parameter
and the inline gen_intermediate_code_internal functions.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The gen_opc_* arrays are already redundant with the data stored in
the insn_start arguments. Transition restore_state_to_opc to use
data from the latter.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Adjust all translators to respect it.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This symbol no longer exists.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reduce the boilerplate required for each target. At the same time,
move the test for breakpoint after calling tcg_gen_insn_start.
Note that arm and aarch64 do not use cpu_breakpoint_test, but still
move the inline test down after tcg_gen_insn_start.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This does tidy the icount test common to all targets.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
While we're at it, emit the opcode adjacent to where we currently
record data for search_pc. This puts gen_io_start et al on the
"correct" side of the marker.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
With an eye toward making it mandatory.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
After CPU hotplug has been converted to BUS-less hot-plug infrastructure,
the only function ICC bus performs is to propagate reset to LAPICs. However
LAPIC could be reset by registering its reset handler after all device are
initialized.
Do so and drop ~30LOC of not needed anymore ICCBus related code.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When ICC bus/bridge is removed, APIC MMIO will be left
unmapped since it was mapped into system's address space
indirectly by ICC bridge.
Fix it by moving mapping into APIC code, so it would be
possible to remove ICC bus/bridge code later.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When doing a re-initialization of a CPU core, the default state is to _not_
have 64-bit long mode enabled. This means the LME (long mode enable) and LMA
(long mode active) bits in the EFER model-specific register should be cleared.
However, the EFER state is part of the CPU environment which is
preserved by do_cpu_init(), so if EFER.LME and EFER.LMA were set at the
time an INIT IPI was received, they will remain set after the init completes.
This is contrary to what the Intel architecture manual describes and what
happens on real hardware, and it leaves the CPU in a weird state that the
guest can't clear.
To fix this, the 'efer' member of the CPUX86State structure has been moved
to an area outside the region preserved by do_cpu_init(), so that it can
be properly re-initialized by x86_cpu_reset().
Signed-off-by: Bill Paul <wpaul@windriver.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
ABM is only implemented as a single instruction set by AMD; all AMD
processors support both instructions or neither. Intel considers POPCNT
as part of SSE4.2, and LZCNT as part of BMI1, but Intel also uses AMD's
ABM flag to indicate support for both POPCNT and LZCNT. It has to be
added to Haswell and Broadwell because Haswell, by adding LZCNT, has
completed the ABM.
Tested with "qemu-kvm -cpu Haswell-noTSX,enforce" (and also with older
machine types) on an Haswell-EP machine.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There's one report of migration breaking due to missing MSR_TSC_AUX
save/restore. Fix this by adding a new subsection that saves the state
of this MSR.
https://bugzilla.redhat.com/show_bug.cgi?id=1261797
Reported-by: Xiaoqing Wei <xwei@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The function is now only used from within a single file.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Convert the kvm_default_features and kvm_default_unset_features arrays
into a simple list of property/value pairs that will be applied to
X86CPU objects when using KVM.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch updates x86_cpu_exec_interrupt function.
It can process two interrupt request at a time (poll and another one).
This makes its execution non-deterministic. Determinism is requred
for recorded icount execution.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162410.8676.13042.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Processing CPU_INTERRUPT_POLL requests in cpu_has_work functions
break the determinism of cpu_exec. This patch is required to make
interrupts processing deterministic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162331.8676.15286.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename ELF_MACHINE to be I386 specific. This is used as-is by the
multiboot loader.
Linux-user previously used this definition but will not anymore,
falling back to the default bahaviour of using ELF_ARCH as ELF_MACHINE.
This removes another architecture specific definition from the global
namespace.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Added support emulator for the hmp command "info ioapic"
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1442927901-1084-10-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Not only it makes sense, but it gets rid of checkpatch warning:
WARNING: consider using qemu_strtosz in preference to strtosz
Also remove get rid of tabs to please checkpatch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1442419377-9309-1-git-send-email-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Support for HyperV crash report
* Cleanup of target-specific HMP commands
* Multiarch batch
* Checkpatch fix for Perl 5.22
* NBD fix
* Revert incorrect commit 5243722376
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV+Y0VAAoJEL/70l94x66DppAH/393irRPGYJiZqClXDmPZymd
Ilv+mKQIA+QSGiMaVoq0POWqvSa6oPOIOAK8BexhHDWPnxDSeAU9JzjrkwQILjD3
A5kFsR1mhw/oV8aZCsE926SUoY90VH7QP2r0iGdur1VV9DG7CUE8q95umJuU1FCo
hvGI2HjlAPvxSrO+Y5vu4ZNOa5XBiUoLodT0j+jNZfoNMx3irAqkJLPqTUuPT8np
jBeu1MtMe3wNjDBm3WMVZwkNEZ3YtuhRkBeggXqDIl1Jm9lq4Eitk7rtETXm6yHz
Vjp9uAF4en/72gXbELRXp+aWvESEABcouLZrdPV/yjOmQD2oTFC7sZrm1c5rZPw=
=MkK8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Linux header update and cleanup
* Support for HyperV crash report
* Cleanup of target-specific HMP commands
* Multiarch batch
* Checkpatch fix for Perl 5.22
* NBD fix
* Revert incorrect commit 5243722376
# gpg: Signature made Wed 16 Sep 2015 16:39:01 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (24 commits)
nbd: release exp->blk after all clients are closed
checkpatch: Escape left braces in regex
monitor: uninclude cpu_ldst
include/exec: Move cputlb exec.c defs out
cputlb: Change tlb_set_dirty() arg to cpu
cputlb: move CPU_LOOP() for tlb_reset() to exec.c
translate: move real_host_page setting to -common
tcg: Move tci_tb_ptr to -common
tcg: split tcg_op_defs to -common
translate-all: Move tcg_handle_interrupt() to -common
cpu-exec: Migrate some generic fns to cpu-exec-common
qemu-char: Use g_new() & friends where that makes obvious sense
monitor: added generation of documentation for hmp-commands-info.hx
hmp-commands.hx: fix end of table info
monitor: remove target-specific code from monitor.c
hmp-commands-info: move info_cmds content out of monitor.c
i386/kvm: Hyper-v crash msrs set/get'ers and migration
kvm: Add kvm system event crash handler
cpu: Add crash_occurred flag into CPUState
target-i386: move asm-x86/hyperv.h to standard-headers
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move target-specific code out of /monitor.c to /target-*/monitor.c,
this will avoid code cluttering and using random ifdeffery. The solution
is quite simple, but solves the issue of the separation of target-specific
code from monitor.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM Hyper-V based guests can notify hypervisor about
occurred guest crash by writing into Hyper-V crash MSR's.
This patch does handling and migration of HV_X64_MSR_CRASH_P0-P4,
HV_X64_MSR_CRASH_CTL msrs. User can enable these MSR's by
'hv-crash' option.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-13-git-send-email-den@openvz.org>
[Folks, stop abrviating variable names!!! Also fix compilation on
non-Linux/x86. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Hyper-V definitions are an industry standard and can be used
from code that is not KVM-specific.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes exception handling for other helper functions.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This patch fixes exception handling for seg_helper functions.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This patch fixes exception handling for memory helpers
and removes obsolete PC update from translate.c.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This patch fixes exception handling for div instructions
and removes obsolete PC update from translate.c.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This patch fixes exception handling for FPU instructions
and removes obsolete PC update from translate.c.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This patch introduces new versions of raise_exception functions
that receive TB return address as an argument.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Richard Henderson <rth@twiddle.net>
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
=nB06
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (44 commits)
cutils: work around platform differences in strto{l,ul,ll,ull}
cpu-exec: fix lock hierarchy for user-mode emulation
exec: make mmap_lock/mmap_unlock globally available
tcg: comment on which functions have to be called with mmap_lock held
tcg: add memory barriers in page_find_alloc accesses
remove unused spinlock.
replace spinlock by QemuMutex.
cpus: remove tcg_halt_cond and tcg_cpu_thread globals
cpus: protect work list with work_mutex
scripts/dump-guest-memory.py: fix after RAMBlock change
configure: Add support for jemalloc
add macro file for coccinelle
configure: factor out adding disas configure
vhost-scsi: fix wrong vhost-scsi firmware path
checkpatch: remove tests that are not relevant outside the kernel
checkpatch: adapt some tests to QEMU
CODING_STYLE: update mixed declaration rules
qmp: Add example usage of strto*l() qemu wrapper
cutils: Add qemu_strtoull() wrapper
cutils: Add qemu_strtoll() wrapper
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is set to true when the index is for an instruction fetch
translation.
The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS
acessors.
All targets ignore it for now, and all other callers pass "false".
This will allow targets who wish to split the mmu index between
instruction and data accesses to do so. A subsequent patch will
do just that for PowerPC.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Message-Id: <1439796853-4410-2-git-send-email-benh@kernel.crashing.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
A number of files were including signal.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
spinlock is only used in two cases:
* cpu-exec.c: to protect TranslationBlock
* mem_helper.c: for lock helper in target-i386 (which seems broken).
It's a pthread_mutex_t in user-mode, so we can use QemuMutex directly,
with an #ifdef. The #ifdef will be removed when multithreaded TCG
will need the mutex as well.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-Id: <1439220437-23957-5-git-send-email-fred.konrad@greensocs.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[Merge Emilio G. Cota's patch to remove volatile. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function is not used by PC code anymore and can be removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is a cut-and-paste mistake in the patch
https://lists.gnu.org/archive/html/qemu-devel/2014-11/msg01657.html .
It cause errors in guest work. Here is the bugfix.
Signed-off-by: Dmitry Poletaev <poletaev-qemu@yandex.ru>
Reported-by: Kirill Batuzov <batuzovk@ispras.ru>
Message-Id: <2692911436348920@web2m.yandex.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
W10 insider has a bug where it ignores CPUID level and interprets
CPUID.(EAX=07H, ECX=0H) incorrectly, because CPUID in fact returned
CPUID.(EAX=04H, ECX=0H); this resulted in execution of unsupported
instructions.
While it's a Windows bug, there is no reason to emulate incorrect level.
I used http://instlatx64.atw.hu/ as a source of CPUID and checked that
it matches Penryn Xeon X5472, Westmere Xeon W3520, SandyBridge i5-2540M,
and Haswell i5-4670T.
kvm64 and qemu64 were bumped to 0xD to allow all available features for
them (and to avoid the same Windows bug).
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Now object_property_add_alias() calls g_strdup() on the target property
name, so we don't need to call g_strdup() ourselves.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Remove un-needed usages of ENV_GET_CPU() by converting the APIs to use
CPUState pointers and retrieving the env_ptr as minimally needed.
Scripted conversion for target-* change:
for I in target-*/cpu.h; do
sed -i \
's/\(^int cpu_[^_]*_exec(\)[^ ][^ ]* \*s);$/\1CPUState *cpu);/' \
$I;
done
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The callers (most of them in target-foo/cpu.c) to this function all
have the cpu pointer handy. Just pass it to avoid an ENV_GET_CPU() from
core code (in exec.c).
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
All of the core-code usages of this API have the cpu pointer handy so
pass it in. There are only 3 architecture specific usages (2 of which
are commented out) which can just use ENV_GET_CPU() locally to get the
cpu pointer. The reduces core code usage of the CPU env, which brings
us closer to common-obj'ing these core files.
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add an Error argument to cpu_exec_init() to let users collect the
error. This is in preparation to change the CPU enumeration logic
in cpu_exec_init(). With the new enumeration logic, cpu_exec_init()
can fail if cpu_index values corresponding to max_cpus have already
been handed out.
Since all current callers of cpu_exec_init() are from instance_init,
use error_abort Error argument to abort in case of an error.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVnQWdAAoJEL/70l94x66D6OgIAKJlzQfmy5w7Q9WD4vCMhD76
JrpLSsn7Gx/Bws0Nu9nLQlqun5z4hiUxyG2kP/WqD9+tV3cpSMSyrG6ImVdqKnQ5
+Z8WJZuREkQv0aqDUjQVST+eIDZuh2LWJXAjhgsCXUHY77eWb/7WmKT79xJOa+5C
5xB1qxudqX5IsTvpiKKPbmUGYkAcvRX1dUSaFwRIMO0UyKn59B9WfM9a5slIbLW7
XfI8+wEJshTVLuQkkTfdidWQc5M5DwlmO7ESUNR/BRPCPFeyjcDqgQY5pBM5XVo9
C+S0R3zIt3Ew0fhCtLRyjlIT0bGfwjbU5HRiHcyldBKhNUZZjSUoOWJnYRHXUDY=
=H8wA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Bugfixes and Daniel Berrange's crypto library.
# gpg: Signature made Wed Jul 8 12:12:29 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
ossaudio: fix memory leak
ui: convert VNC to use generic cipher API
block: convert qcow/qcow2 to use generic cipher API
ui: convert VNC websockets to use crypto APIs
block: convert quorum blockdrv to use crypto APIs
crypto: add a nettle cipher implementation
crypto: add a gcrypt cipher implementation
crypto: introduce generic cipher API & built-in implementation
crypto: move built-in D3DES implementation into crypto/
crypto: move built-in AES implementation into crypto/
crypto: introduce new module for computing hash digests
vl: move rom_load_all after machine init done
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The TSC frequency fits comfortably in an int when expressed in kHz,
but it may overflow when converted to Hz. In this case,
tsc-frequency returns a negative value because x86_cpuid_get_tsc_freq
does a 32-bit multiplication before assigning to int64_t.
For simplicity just make tsc_khz a 64-bit value.
Spotted by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
ARAT signals that the APIC timer does not stop in power saving states.
As our APICs are emulated, it's fine to expose this feature to guests,
at least when asking for KVM host features or with CPU types that
include the flag. The exact model number that introduced the feature is
not known, but reports can be found that it's at least available since
Sandy Bridge.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To prepare for a generic internal cipher API, move the
built-in AES implementation into the crypto/ directory
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-3-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The property can take values on, off or auto. The default is "off"
for KVM and pre-2.4 machines, otherwise "auto" (which makes it
available on TCG or on new-enough kernels).
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apart from the MSR, the smi field of struct kvm_vcpu_events has to be
translated into the corresponding CPUX86State fields. Also,
memory transaction flags depend on SMM state, so pull it from struct
kvm_run on every exit from KVM to userspace.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This opens the path to get rid of the iothread lock on vmexits in KVM
mode. On x86, the in-kernel irqchips has to be used because we otherwise
need to synchronize APIC and other per-cpu state accesses that could be
changed concurrently.
Regarding pre/post-run callbacks, s390x and ARM should be fine without
specific locking as the callbacks are empty. MIPS and POWER require
locking for the pre-run callback.
For the handle_exit callback, it is non-empty in x86, POWER and s390.
Some POWER cases could do without the locking, but it is left in
place for now.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1434646046-27150-7-git-send-email-pbonzini@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
disas does not need to access the CPU env for any reason. Change the
APIs to accept CPU pointers instead. Small change pattern needs to be
applied to all target translate.c. This brings us closer to making
disas.o a common-obj and less architecture specific in general.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We create optional sections with this patch. But we already have
optional subsections. Instead of having two mechanism that do the
same, we can just generalize it.
For subsections we just change:
- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
VMStateDescription
Signed-off-by: Juan Quintela <quintela@redhat.com>
Remove cpu_smm_register and cpu_smm_update. Instead, each CPU
address space gets an extra region which is an alias of
/machine/smram. This extra region is enabled or disabled
as the CPU enters/exits SMM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Different CPUs can be in SMM or not at the same time, thus they
will see different things where the chipset places SMRAM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An SMI should definitely wake up a processor in halted state!
This lets OVMF boot with SMM on multiprocessor systems, although
it halts very soon after that with a "CpuIndex != BspIndex"
assertion failure.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because the limit field's bits 31:20 is 1, G should be 1.
VMX actually enforces this, let's do it for completeness
in QEMU as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU is not blocking NMIs on entry to SMM. Implementing this has to
cover a few corner cases, because:
- NMIs can then be enabled by an IRET instruction and there
is no mechanism to _set_ the "NMIs masked" flag on exit from SMM:
"A special case can occur if an SMI handler nests inside an NMI handler
and then another NMI occurs. [...] When the processor enters SMM while
executing an NMI handler, the processor saves the SMRAM state save map
but does not save the attribute to keep NMI interrupts disabled.
- However, there is some hidden state, because "If NMIs were blocked
before the SMI occurred [and no IRET is executed while in SMM], they
are blocked after execution of RSM." This is represented by the new
HF2_SMM_INSIDE_NMI_MASK bit. If it is zero, NMIs are _unblocked_
on exit from RSM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to do this, stop using the cpu_in*/out* helpers, and instead
access address_space_io directly.
cpu_in* and cpu_out* remain for usage in the monitor, in qtest, and
in Xen.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These include page table walks, SVM accesses and SMM state save accesses.
The bulk of the patch is obtained with
sed -i 's/\(\<[a-z_]*_phys\(_notdirty\)\?\>(cs\)->as,/x86_\1,/'
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VKFL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
X86 queue 2015-06-02
# gpg: Signature made Tue Jun 2 20:21:17 2015 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
arch_init: Drop target-x86_64.conf
target-i386: Register QOM properties for feature flags
apic: convert ->busdev.qdev casts to C casts
target-i386: Fix signedness of MSR_IA32_APICBASE_BASE
pc: Ensure non-zero CPU ref count after attaching to ICC bus
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This uses the feature name arrays to register QOM properties for feature
flags. This simply adds properties that can be configured using -global,
but doesn't change x86_cpu_parse_featurestr() to use them yet.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Existing definition triggers the following when using clang
-fsanitize=undefined:
hw/intc/apic_common.c:314:55: runtime error: left shift of 1048575 by 12
places cannot be represented in type 'int'
Fix it so we won't try to shift a 1 to the sign bit of a signed integer.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
On ARM the MSI data corresponds to the shared peripheral interrupt (SPI)
ID. This latter equals to the SPI index + 32. to retrieve the SPI index,
matching the gsi, an architecture specific function is introduced.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let kvm_arch_post_run convert fields in the kvm_run struct to MemTxAttrs.
These are then passed to address_space_rw.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=t4Wd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
X86 queue, 2015-04-27 (v2)
# gpg: Signature made Mon Apr 27 19:42:39 2015 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
target-i386: Remove AMD feature flag aliases from CPU model table
target-i386: X86CPU::xlevel2 QOM property
target-i386: Make "level" and "xlevel" properties static
qemu-config: Accept empty option values
MAINTAINERS: Change status of X86 to Maintained
MAINTAINERS: Add myself to X86
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When CPU vendor is AMD, the AMD feature alias bits on
CPUID[0x80000001].EDX are already automatically copied from CPUID[1].EDX
on x86_cpu_realizefn(). When CPU vendor is Intel, those bits are
reserved and should be zero. On either case, those bits shouldn't be set
in the CPU model table.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We already have "level" and "xlevel", only "xlevel2" is missing.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Static properties require only 1 line of code, much simpler than the
existing code that requires writing new getters/setters.
As a nice side-effect, this fixes an existing bug where the setters were
incorrectly allowing the properties to be changed after the CPU was
already realized.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Switch all the uses of ld/st*_phys to address_space_ld/st*,
except for those cases where the address space is the CPU's
(ie cs->as). This was done with the following script which
generates a Coccinelle patch.
A few over-80-columns lines in the result were rewrapped by
hand where Coccinelle failed to do the wrapping automatically,
as well as one location where it didn't put a line-continuation
'\' when wrapping lines on a change made to a match inside
a macro definition.
===begin===
#!/bin/sh -e
# Usage:
# ./ldst-phys.spatch.sh > ldst-phys.spatch
# spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch
# patch -p1 < out.patch
for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do
cat <<EOF
@ cpu_matches_ld_${FN} @
expression E1,E2;
identifier as;
@@
ld${FN}_phys(E1->as,E2)
@ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @
expression E1,E2;
@@
-ld${FN}_phys(E1,E2)
+address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
for FN in b w_le w_be l_le l_be q_le q_be w l q; do
cat <<EOF
@ cpu_matches_st_${FN} @
expression E1,E2,E3;
identifier as;
@@
st${FN}_phys(E1->as,E2,E3)
@ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @
expression E1,E2,E3;
@@
-st${FN}_phys(E1,E2,E3)
+address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
===endit===
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Since the BSP bit is writable on real hardware, during reset all the CPUs which
were not chosen to be the BSP should have their BSP bit cleared. This fix is
required for KVM to work correctly when it changes the BSP bit.
An additional fix is required for QEMU tcg to allow software to change the BSP
bit.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Message-Id: <1427932716-11800-1-git-send-email-namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the Intel microcode update that removed HLE and RTM, there will be
different kinds of Haswell and Broadwell CPUs out there: some that still
have the HLE and RTM features, and some that don't have the HLE and RTM
features. On both cases people may be willing to use the pc-*-2.3
machine-types.
So, to cover both cases, introduce Haswell-noTSX and Broadwell-noTSX CPU
models, for hosts that have Haswell and Broadwell CPUs without TSX support.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 13704e4c45.
With the Intel microcode update that removed HLE and RTM, there will be
different kinds of Haswell and Broadwell CPUs out there: some that still
have the HLE and RTM features, and some that don't have the HLE and RTM
features. On both cases people may be willing to use the pc-*-2.3
machine-types.
So instead of making the CPU model results confusing by making it depend
on the machine-type, keep HLE and RTM on the existing Haswell and
Broadwell CPU models. The plan is to introduce "Haswell-noTSX" and
"Broadwell-noTSX" CPU models later, for people who have CPUs that don't
have TSX feature available.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of passing icc_bridge from the PC initialization code to
cpu_x86_create(), make the PC initialization code attach the CPU to
icc_bridge.
The only difference here is that icc_bridge attachment will now be done
after x86_cpu_parse_featurestr() is called. But this shouldn't make any
difference, as property setters shouldn't depend on icc_bridge.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This is improved type checking for the translators -- it's no longer
possible to accidentally swap arguments to the branch functions.
Note that the code generating backends still manipulate labels as int.
With notable exceptions, the scope of the change is just a few lines
for each target, so it's not worth building extra machinery to do this
change in per-target increments.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
A bunch of fixes all over the place, some of the
bugs fixed are actually regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVAH/uAAoJECgfDbjSjVRprq0H/iyqLSHQIv6gNOPYQbLXOCv0
pkCeLx6kTMO9lSwxZcsZvMsYPeiEL3CHRKJcEjq0+Ap0uen0pa2Yl3WzyJcnBcib
xwkHk/UftFYAiZAzVtd4moXujvVLYNL1ukvr/wPOdIkTEn8U6K3NaT3pLooc369f
oTyQhlL3E9HJ5S6X0HXJIFwtsOIhPfS3NCLoDFbFjtb9mIsqTx7N5s2C5hctF+ir
JtyuwPx5oT73WYxoYmjSP6n/Nf5cuJdqtm6o2KijjhWWYMJ6epYVBo/DD6dIFbmJ
V/23dxpon+lvhae2c2LAVrkiJ1Boon/eMbJK/mNwpFX7vW35ataLPy6pYpaiEJs=
=RUld
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
misc fixes and cleanups
A bunch of fixes all over the place, some of the
bugs fixed are actually regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed Mar 11 17:48:30 2015 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (25 commits)
virtio-scsi: remove empty wrapper for cmd
virtio-scsi: clean out duplicate cdb field
virtio-scsi: fix cdb/sense size
uapi/virtio_scsi: allow overriding CDB/SENSE size
virtio-scsi: drop duplicate CDB/SENSE SIZE
exec: don't include hw/boards for linux-user
acpi: specify format for build_append_namestring
MAINTAINERS: drop aliguori@amazon.com
tpm: Move memory subregion function into realize function
virtio-pci: Convert to realize()
pci: Convert pci_nic_init() to Error to avoid qdev_init()
machine: query mem-merge machine property
machine: query dump-guest-core machine property
hw/boards: make it safe to include for linux-user
machine: query phandle-start machine property
machine: query kvm-shadow-mem machine property
kvm: add machine state to kvm_arch_init
machine: query kernel-irqchip property
machine: allowed/required kernel-irqchip support
machine: replace qemu opts with iommu property
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit e79d5a6 ("machine: remove qemu_machine_opts global list") removed
the global option descriptions and moved them to MachineState's QOM
properties.
Query kvm-shadow-mem by accessing machine properties through designated
wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Needed to query machine's properties.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
code assigning APIC ID.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=iDzB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
X86 patches queued in the last few weeks. Mostly code cleanup and changes on
code assigning APIC ID.
# gpg: Signature made Mon Mar 9 20:40:38 2015 GMT using RSA key ID 984DC5A6
# gpg: Can't check signature: public key not found
* remotes/ehabkost/tags/x86-pull-request:
target-i386: Require APIC ID to be explicitly set before CPU realize
target-i386: Move APIC ID compatibility code to pc.c
target-i386: Move CPUX86State::cpuid_apic_id to X86CPU::apic_id
target-i386: Remove unused APIC ID default code
target-i386: Eliminate unnecessary get_cpuid_vendor() function
target-i386: Simplify listflags() function
target-i386: Move topology.h to include/hw/i386
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
x86_cpu_apic_realize() calls qdev_init() to realize the APIC.
qdev_init()'s error handling has unwanted side effects: it unparents
the device, and it calls qerror_report_err().
qerror_report_err() is always inappropriate in realize methods,
because it doesn't return the Error object. It either reports the
error to stderr or the human monitor, or it stores it in the QMP
monitor, where it makes the QMP command fail even though the realize
method succeeded.
Fortunately, qdev_init() can't actually fail here, because realize
can't fail for any of the three possible APIC device models.
Clean up by cutting out the qdev_init() middle-man: set property
"realized" directly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
According to my reading of the Intel documentation, the SYSRET instruction
is supposed to force the RPL bits of the %ss register to 3 when returning
to user mode. The actual sequence is:
SS.Selector <-- (IA32_STAR[63:48]+8) OR 3; (* RPL forced to 3 *)
However, the code in helper_sysret() leaves them at 0 (in other words, the "OR
3" part of the above sequence is missing). It does set the privilege level
bits of %cs correctly though.
This has caused me trouble with some of my VxWorks development: code that runs
okay on real hardware will crash on QEMU, unless I apply the patch below.
Signed-off-by: Bill Paul <wpaul@windriver.com>
Message-Id: <201503091548.01462.wpaul@windriver.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On softmuu, instead of setting APIC ID automatically when creating a
X86CPU, require the property to be set before realizing the object
(which is already done by the CPU creation code on PC).
Keep apic_id = 0 by default on *-user so it can simply create a new CPU
object and realize it without extra steps (so target-i386 will be able
to use cpu_generic_init() eventually).
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The APIC ID compatibility code is required only for PC, and now that
x86_cpu_initfn() doesn't use x86_cpu_apic_id_from_index() anymore, that
code can be moved to pc.c.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The field doesn't need to be inside CPUX86State, and it is not specific
for the CPUID instruction, so move and rename it.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The existing apic_id = cpu_index code has no visible effect: the PC code
already initializes the APIC ID according to the topology on
pc_new_cpu(), and linux-user memcpy()s the CPU state (including
cpuid_apic_id) on cpu_copy().
Remove the dead code and simply let APIC ID to to be 0 by default. This
doesn't change behavior of PC because apic-id is already explicitly set,
and doesn't affect linux-user because APIC ID was already always 0.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The function was used in only two places. In one of them, the function
made the code less readable by requiring temporary te[bcd]x variables.
In the other one we can simply inline the existing code.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
listflags() had lots of unnecessary complexity. Instead of printing to a
buffer that will be immediately printed, simply call the printing
function directly. Also, remove the fbits and flags arguments that were
always set to the same value. Also, there's no need to list the flags in
reverse order.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will allow the PC code to use the header, and lets us eliminate the
QEMU_INCLUDES hack inside tests/Makefile.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit b8a173b25c, reversing
changes made to 5de090464f.
(I applied this pull request when I should not have done so, and
am now immediately reverting it.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1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=+Vbk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
* remotes/ehabkost/tags/x86-pull-request:
target-i386: Move APIC ID compatibility code to pc.c
target-i386: Require APIC ID to be explicitly set before CPU realize
target-i386: Set APIC ID using cpu_index on CONFIG_USER
linux-user: Check for cpu_init() errors
target-i386: Move CPUX86State.cpuid_apic_id to X86CPU.apic_id
target-i386: Simplify error handling on cpu_x86_init_user()
target-i386: Eliminate cpu_init() function
target-i386: Rename cpu_x86_init() to cpu_x86_init_user()
target-i386: Move topology.h to include/hw/i386
target-i386: Eliminate unnecessary get_cpuid_vendor() function
target-i386: Simplify listflags() function
Conflicts:
target-i386/cpu.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The APIC ID compatibility code is required only for PC, and now that
x86_cpu_initfn() doesn't use x86_cpu_apic_id_from_index() anymore, that
code can be moved to pc.c.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of setting APIC ID automatically when creating a X86CPU, require
the property to be set before realizing the object (which all callers of
cpu_x86_create() already do).
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The PC CPU initialization code already sets apic-id based on the CPU
topology, and CONFIG_USER doesn't need the topology-based APIC ID
calculation code.
Make CONFIG_USER set apic-id before realizing the CPU (just like PC
already does), so we can simplify x86_cpu_initfn later. As there is no
CPU topology configuration in CONFIG_USER, just use cpu_index as the
APIC ID.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The field doesn't need to be inside CPUState, and it is not specific for
the CPUID instruction, so move and rename it.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of putting extra logic inside cpu.h, just do everything inside
cpu_x86_init_user().
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The function is used only for CONFIG_USER, so make its purpose clear.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will allow the PC code to use the header, and lets us eliminate the
QEMU_INCLUDES hack inside tests/Makefile.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The function was used in only two places. In one of them, the function
made the code less readable by requiring temporary te[bcd]x variables.
In the other one we can simply inline the existing code.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
listflags() had lots of unnecessary complexity. Instead of printing to a
buffer that will be immediately printed, simply call the printing
function directly. Also, remove the fbits and flags arguments that were
always set to the same value. Also, there's no need to list the flags in
reverse order.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The method by which we count the number of ops emitted
is going to change. Abstract that away into some inlines.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
All Haswell CPUs and some Broadwell CPUs were updated by Intel to have
the HLE and RTM features disabled. This will prevent
"-cpu Haswell,enforce" and "-cpu Broadwell,enforce" from running out of
the box on those CPUs.
Disable those features by default on Broadwell and Haswell CPU models,
starting on pc-*-2.3. Users who want to use those features can enable
them explicitly on the command-line.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, the AVX512 registers are split in many different fields:
xmm_regs for the low 128 bits of the first 16 registers, ymmh_regs
for the next 128 bits of the same first 16 registers, zmmh_regs
for the next 256 bits of the same first 16 registers, and finally
hi16_zmm_regs for the full 512 bits of the second 16 bit registers.
This makes it simple to move data in and out of the xsave region,
but would be a nightmare for a hypothetical TCG implementation and
leads to a proliferation of [XYZ]MM_[BWLSQD] macros. Instead,
this patch marshals data manually from the xsave region to a single
32x512-bit array, simplifying the macro jungle and clarifying which
bits are in which vmstate subsection.
The migration format is unaffected.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After the next patch, each vmstate field will extract parts of a larger
(32x512-bit) array, so we cannot check the vmstate field against the
type of the array.
While changing this, change the macros to accept the index of the first
element (which will not be 0 for Hi16_ZMM_REGS) instead of the number
of elements (which is always CPU_NB_REGS).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use inline functions rather than macros for cpu_ld/st accessors
for the *-user configurations, as we already do for softmmu.
This has a two advantages:
* we can actually typecheck our arguments
* we don't need to leak the _raw macros everywhere
Since the _kernel functions were only used by target-i386/seg_helper.c,
put the definitions for them in that file too. (It already has the
similar template include code to define them for the softmmu case,
so it makes sense to have it deal with defining them for user-only.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1421334118-3287-12-git-send-email-peter.maydell@linaro.org
The TARGET_HAS_ICE #define is intended to indicate whether a target-*
guest CPU implementation supports the breakpoint handling. However,
all our guest CPUs have that support (the only two which do not
define TARGET_HAS_ICE are unicore32 and openrisc, and in both those
cases the bp support is present and the lack of the #define is just
a bug). So remove the #define entirely: all new guest CPU support
should include breakpoint handling as part of the basic implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1420484960-32365-1-git-send-email-peter.maydell@linaro.org
the record/replay series, and a few SCSI and i386 patches as well.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUtjlCAAoJEL/70l94x66Dy5gH/0QIHoXVH/2wuA9apNK2/gBj
2U7g08QGKlc2wQGF4a48sQf523lSt5eirVxrwta0wmvFeznrdR84d4YGpolHM67A
Q9Y5J2i+v1H6cfQH6ylq61QQ7rEC3+isa65wblLeMSCAb2W1CcV7avSKu4BSPZw2
jGr3jd2Ve7pOsULpPhiNsmmltYSeZc7sQBYc9C7fQEoxOGsNnRoKOUKPnIk1mJTc
iYH480L1MnOL3enIz13K34lQofNRhJxJBLYKhYsBydQbOh0/Ls1eifOY4xEegXZ0
IUODy6c2pk+s/IUPARpBucKGKzDxdv0DLXDV60uGn5EsYT0CjCl9/sRs3bZvaQE=
=eT8u
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Mostly bugfixes and cleanups from qemu-devel. Yet another small patch from
the record/replay series, and a few SCSI and i386 patches as well.
# gpg: Signature made Wed 14 Jan 2015 09:39:14 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
cpus: consistently use QEMU_CLOCK_VIRTUAL_RT for icount_warp_rt timer
qemu-timer: rename timer_init to timer_init_tl
scsi: fix cancellation when I/O was completed but DMA was not.
rules.mak: Fix module build
hw/scsi/lsi53c895a: add support for additional diag / debug registers
qemu-common.h: optimise muldiv64 if int128 is available
target-i386: do not memcpy in and out of xmm_regs
target-i386: fix movntsd on big-endian hosts
vl.c: fix regression when reading memory size from config file
vl: Don't silently change topology when all -smp options were set
vl: fix max_cpus check
vl: Avoid unnecessary 'if' nesting
9pfs: changed to use event_notifier instead of qemu_pipe
vl.c: fix regression when reading machine type from config file
char: restore stdio echo on resume from suspend.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After the next patch, we will move the high parts of AVX and AVX512 registers
in the same array as the SSE registers. This will make it impossible to
memcpy an array of 128-bit values in and out of xmm_regs in one swoop.
Use a for loop instead.
Similarly, always use XMM_Q in translate.c. This avoids introducing bugs
such as the one fixed in the previous patch.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was accessing an XMM register's low half without going through XMM_Q.
Cc: qemu-stable@nongnu.org
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
on s390 MSI-X irqs are presented as thin or adapter interrupts
for this we have to reorganize the routing entry to contain
valid information for the adapter interrupt code on s390.
To minimize impact on existing code we introduce an architecture
function to fixup the routing entry.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Running barebox on qemu-system-mips* with '-d unimp' overloads
stderr by very very many mips_cpu_handle_mmu_fault() messages:
mips_cpu_handle_mmu_fault address=b80003fd ret 0 physical 00000000180003fd prot 3
mips_cpu_handle_mmu_fault address=a0800884 ret 0 physical 0000000000800884 prot 3
mips_cpu_handle_mmu_fault pc a080cd80 ad b80003fd rw 0 mmu_idx 0
So it's very difficult to find LOG_UNIMP message.
The mips_cpu_handle_mmu_fault() messages appear on enabling ANY
logging! It's not very handy.
Adding separate log category for *_cpu_handle_mmu_fault()
logging fixes the problem.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1418489298-1184-1-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- valgrind/KVM support
- small i386 patches
- PCI SD host controller support
- malloc/free cleanups from Markus (x86/scsi)
- IvyBridge model
- XSAVES support for KVM
- initial patches from record/replay
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUjw28AAoJEL/70l94x66D9kcH/RBoc4mNjrSt+MLy9Y+Fu1bu
HNhfd1n/yA0MKSHtSYwJPgkiuoxG3jHt0N69gbpZE0kdBcK+PPZZZUpTFIAU6vD/
D0O7l+2viOcl2z7SPuHIp9/O0CChsAYZkH+Zn2XbeStbe4d4f6bFzdy4vblMsirQ
BfMn/Y2Dw1uLknvrO3/QKgGhbK5Nxo/Te7lavRP+w7FgOhAdAUHOhBPfGrPWtG+0
0hVWmxoQyJtk+Ltt2oF4zUkql7czDsgyXkaO82l3TkecCvtqolCuby4lQIFJnq7E
vw0XUDwC/l/MWnXFq/rG97yopfIxkSAthT/xP/+TTJKM/oJEWDTh6I8ghQTdG90=
=ncys
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- Migration and linuxboot fixes for 2.2 regressions
- valgrind/KVM support
- small i386 patches
- PCI SD host controller support
- malloc/free cleanups from Markus (x86/scsi)
- IvyBridge model
- XSAVES support for KVM
- initial patches from record/replay
# gpg: Signature made Mon 15 Dec 2014 16:35:08 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (47 commits)
sdhci: Support SDHCI devices on PCI
sdhci: Define SDHCI PCI ids
sdhci: Add "sysbus" to sdhci QOM types and methods
sdhci: Remove class "virtual" methods
sdhci: Set a default frequency clock
serial: only resample THR interrupt on rising edge of IER.THRI
serial: update LSR on enabling/disabling FIFOs
serial: clean up THRE/TEMT handling
serial: reset thri_pending on IER writes with THRI=0
linuxboot: fix loading old kernels
kvm/apic: fix 2.2->2.1 migration
target-i386: add Ivy Bridge CPU model
target-i386: add f16c and rdrand to Haswell and Broadwell
target-i386: add VME to all CPUs
pc: add 2.3 machine types
i386: do not cross the pages boundaries in replay mode
cpus: make icount warp behave well with respect to stop/cont
timer: introduce new QEMU_CLOCK_VIRTUAL_RT clock
cpu-exec: invalidate nocache translation if they are interrupted
icount: introduce cpu_get_icount_raw
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both were added in Ivy Bridge (for which we do not have a CPU model
yet!).
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vm86 mode extensions date back to the 486. All models should have
them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch denies crossing the boundary of the pages in the replay mode,
because it can cause an exception. Do it only when boundary is
crossed by the first instruction in the block.
If current instruction already crossed the bound - it's ok,
because an exception hasn't stopped this code.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add xsaves related definition, it also adds corresponding part
to kvm_get/put, and vmstate.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
