The dataplane code used to be significantly different from the
non-dataplane code and therefore had a separate source file.
Over time the difference has gotten smaller because the I/O code paths
were unified. Nowadays the distinction between the VirtIOBlock and
VirtIOBlockDataPlane structs is more of an inconvenience that hinders
code simplification.
Move hw/block/dataplane/virtio-blk.c into hw/block/virtio-blk.c, merging
VirtIOBlockDataPlane's fields into VirtIOBlock.
hw/block/virtio-blk.c used VirtIOBlock->dataplane to check if
virtio_blk_data_plane_create() was successful. This is not necessary
because ->dataplane_started and ->dataplane_disabled can be used
instead. This patch makes those changes in order to drop
VirtIOBlock->dataplane.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240119135748.270944-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some ELF files really do have segments of zero size, e.g.:
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
RISCV_ATTRIBUT 0x00000000000025b8 0x0000000000000000 0x0000000000000000
0x000000000000003e 0x0000000000000000 R 0x1
LOAD 0x0000000000001000 0x0000000080200000 0x0000000080200000
0x00000000000001d1 0x00000000000001d1 R E 0x1000
LOAD 0x00000000000011d1 0x00000000802001d1 0x00000000802001d1
0x0000000000000e37 0x0000000000000e37 RW 0x1000
LOAD 0x0000000000000120 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x1000
The current logic does not check for this condition, resulting in
the incorrect assignment of 'lowaddr' as zero.
There is already a piece of codes inside the segment traversal loop
that checks for zero-sized loadable segments for not creating empty
ROM blobs. Let's move this check to the beginning of the loop to
cover both scenarios.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240116155049.390301-1-bmeng@tinylab.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
ISM devices are sensitive to manipulation of the IOMMU, so the ISM device
needs to be reset before the vfio-pci device is reset (triggering a full
UNMAP). In order to ensure this occurs, trigger ISM device resets from
subsystem_reset before triggering the PCI bus reset (which will also
trigger vfio-pci reset). This only needs to be done for ISM devices
which were enabled for use by the guest.
Further, ensure that AIF is disabled as part of the reset event.
Fixes: ef1535901a ("s390x: do a subsystem reset before the unprotect on reboot")
Fixes: 03451953c7 ("s390x/pci: reset ISM passthrough devices on shutdown and system reset")
Reported-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20240118185151.265329-4-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use a flag to keep track of whether AIF is currently enabled. This can be
used to avoid enabling/disabling AIF multiple times as well as to determine
whether or not it should be disabled during reset processing.
Fixes: d0bc7091c2 ("s390x/pci: enable adapter event notification for interpreted devices")
Reported-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20240118185151.265329-2-mjrosato@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
j is used while loading an ELF file to byteswap segments'
data. If data is larger than 2GB an overflow may happen.
So j should be elf_word.
This commit fixes a minor bug: it's unlikely anybody is trying to
load ELF files with 2GB+ segments for wrong-endianness targets,
but if they did, it wouldn't work correctly.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org
Fixes: 7ef295ea5b ("loader: Add data swap option to load-elf")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SYSCFG input GPIOs aren't connected yet. When the STM32L4x5 GPIO
device will be implemented, its output GPIOs will be connected to the
SYSCFG input GPIOs.
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240109194438.70934-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Although very similar to the STM32F4xx EXTI, STM32L4x5 EXTI generates
more than 32 event/interrupt requests and thus uses more registers
than STM32F4xx EXTI which generates 23 event/interrupt requests.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240109160658.311932-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix device presence checking in the virtio-ccw qtest
* Support codespell checking in checkpatch.pl
* Fix emulation of LAE s390x instruction
* Work around htags bug when environment is large
* Some other small clean-ups here and there
-----BEGIN PGP SIGNATURE-----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=F/j2
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-01-11' of https://gitlab.com/thuth/qemu into staging
* Fix non-deterministic failures of the 'netdev-socket' qtest
* Fix device presence checking in the virtio-ccw qtest
* Support codespell checking in checkpatch.pl
* Fix emulation of LAE s390x instruction
* Work around htags bug when environment is large
* Some other small clean-ups here and there
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmWgHlgRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXAnBAAjQve/Jmfp9p8eQmswG7cl/a2TuJ59b9X
# SFRja2PprV/Wp4kxxEJX4er9F2+rlMusNL62LBp/QjZi9u4lCvCmuB7sMa0wEkjr
# BPPBrkxkAT+/8vhGpYg2GrxZv/UOLkycp3sjEp4v5yXWQw+OEBnkZZ+AuHddpnEr
# NKMKss71uQmccvuzD5FMDfbJQcSBD/yGPyFfDrv1RKreYRlbkEDVlcVoZpfoMwQY
# Pl167iDdmjVtsT+4wf8vHo5W/AYKDOjlV6AoujCnJVZnGx6BtDLiF/iNJ/VU1Ty5
# cRxySPT64HG+cGrbRqz9IjDvs++WW5EQn1jPY8NO2XFz3sney6Cs/pLKjqJY9S7P
# kfOXOBZG3zOI1kgd/CSR5b4szg4XvtTZaupczKiGOpYC9klf0oQNXGU5jXi3Csop
# Q332oUgiPeNdOx/4tXobFX6RwVCqLRYZbHx9RRYSxWlqJJPAB74/n+RZsmOtsxuJ
# RaiPKDmbVlslkUm78gIa5e6DMwDk2wmlkqa64W7VZxyqfQTRDPiPvfMGePkj6tmZ
# h9vUsELwwORlHpZyL08n0fzs3aeIYwzPwhfr+5iQZIawIp4Zqo8i8Lic/WfIlok9
# rmPIA0mjs1VtrUsroItw4NcY04xcVa7hkhz4EbkZROrfGamdkLuvbk2OKuOeoL0U
# lpgtQL6jA7E=
# =F/j2
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 11 Jan 2024 16:59:04 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-01-11' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d/buildtest.yml: Work around htags bug when environment is large
tests/tcg/s390x: Test LOAD ADDRESS EXTENDED
target/s390x: Fix LAE setting a wrong access register
scripts/checkpatch: Support codespell checking
hw/s390x/ccw: Replace dirname() with g_path_get_dirname()
hw/s390x/ccw: Replace basename() with g_path_get_basename()
target/s390x/kvm/pv: Provide some more useful information if decryption fails
gitlab: fix s390x tag for avocado-system-centos
tests/qtest/virtio-ccw: Fix device presence checking
qtest: ensure netdev-socket tests have non-overlapping names
net: handle QIOTask completion to report useful error message
net: add explicit info about connecting/listening state
Revert "tests/qtest/netdev-socket: Raise connection timeout to 120 seconds"
Revert "osdep: add getloadavg"
Revert "netdev: set timeout depending on loadavg"
qtest: use correct boolean type for failover property
q800: move dp8393x_prom memory region to Q800MachineState
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZZ/QKgAKCRBAov/yOSY+
34eqBADA48++Z9gETFNheLUHdYEaja2emn+gSaoHLFquyq/l53w8RfrUII+BzV1o
T7D8xjlVQldAYZzqQn2pQe2S7r4ggfeNmxGxwJbCTW9sooGMwBnU8+Ix3ruSet7K
gI+UHLU4oHk6jdrT384tux2EG+qUmlLN1c7j4G/z1OzKEwFv7Q==
=+Pi0
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240111' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240111
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZZ/QKgAKCRBAov/yOSY+
# 34eqBADA48++Z9gETFNheLUHdYEaja2emn+gSaoHLFquyq/l53w8RfrUII+BzV1o
# T7D8xjlVQldAYZzqQn2pQe2S7r4ggfeNmxGxwJbCTW9sooGMwBnU8+Ix3ruSet7K
# gI+UHLU4oHk6jdrT384tux2EG+qUmlLN1c7j4G/z1OzKEwFv7Q==
# =+Pi0
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 11 Jan 2024 11:25:30 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240111' of https://gitlab.com/gaosong/qemu:
hw/intc/loongarch_extioi: Add vmstate post_load support
hw/intc/loongarch_extioi: Add dynamic cpu number support
hw/loongarch/virt: Set iocsr address space per-board rather than percpu
hw/intc/loongarch_ipi: Use MemTxAttrs interface for ipi ops
target/loongarch: Add loongarch kvm into meson build
target/loongarch: Implement set vcpu intr for kvm
target/loongarch: Restrict TCG-specific code
target/loongarch: Implement kvm_arch_handle_exit
target/loongarch: Implement kvm_arch_init_vcpu
target/loongarch: Implement kvm_arch_init function
target/loongarch: Implement kvm get/set registers
target/loongarch: Supplement vcpu env initial when vcpu reset
target/loongarch: Define some kvm_arch interfaces
linux-headers: Synchronize linux headers from linux v6.7.0-rc8
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On LoongArch physical machine, one extioi interrupt controller only
supports 4 cpus. With processor more than 4 cpus, there are multiple
extioi interrupt controllers; if interrupts need to be routed to
other cpus, they are forwarded from extioi node0 to other extioi nodes.
On virt machine model, there is simple extioi interrupt device model.
All cpus can access register of extioi interrupt controller, however
interrupt can only be route to 4 vcpu for compatible with old kernel.
This patch adds dynamic cpu number support about extioi interrupt.
With old kernel legacy extioi model is used, however kernel can detect
and choose new route method in future, so that interrupt can be routed to
all vcpus.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231215100333.3933632-4-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
LoongArch system has iocsr address space, most iocsr registers are
per-board, however some iocsr register spaces banked for percpu such
as ipi mailbox and extioi interrupt status. For banked iocsr space,
each cpu has the same iocsr space, but separate data.
This patch changes iocsr address space per-board rather percpu,
for iocsr registers specified for cpu, MemTxAttrs.requester_id
can be parsed for the cpu. With this patches, the total address space
on board will be simple, only iocsr address space and system memory,
rather than the number of cpu and system memory.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231215100333.3933632-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
There is no need to dynamically allocate the memory region from the heap.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20231227210212.245106-1-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Update the GPEX host bridge properties related to MMIO ranges with
values set for the virt machine.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-12-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
ACPI DSDT generator needs information like ECAM range, PIO range, 32-bit
and 64-bit PCI MMIO range etc related to the PCI host bridge. Instead of
making these values machine specific, create properties for the GPEX
host bridge with default value 0. During initialization, the firmware
can initialize these properties with correct values for the platform.
This basically allows DSDT generator code independent of the machine
specific memory map accesses.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231218150247.466427-11-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Some macros and static function related to IMSIC are defined in virt.c.
They are required in virt-acpi-build.c. So, make them public.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-5-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISC-V also needs to create the virtio in DSDT in the same way as ARM.
So, instead of duplicating the code, move this function to the device
specific file which is common across architectures.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-3-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISC-V also needs to use the same code to create fw_cfg in DSDT. So,
avoid code duplication by moving the code in arm and riscv to a device
specific file.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-2-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A SoC will not have a direct access to the NVIC embedded in its ARM
core. By aliasing the "num-prio-bits" property similarly to what is
done for the "num-irq" one, a SoC can easily configure it on its
armv7m instance.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240106181503.1746200-3-sam@rfc1149.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds a new STM32L4x5 SoC, it is necessary to add support for
the B-L475E-IOT01A board.
The implementation is derived from the STM32F405 SoC.
The implementation contains no peripherals, only memory regions are
implemented.
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240108135849.351719-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As previously done for the sPAPR and legacy IOMMU backends, convert
the VFIOIOMMUOps struct to a QOM interface. The set of of operations
for this backend can be referenced with a literal typename instead of
a C struct.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Move vfio_spapr_container_setup() to a VFIOIOMMUClass::setup handler
and convert the sPAPR VFIOIOMMUOps struct to a QOM interface. The
sPAPR QOM interface inherits from the legacy QOM interface because
because both have the same basic needs. The sPAPR interface is then
extended with the handlers specific to the sPAPR IOMMU.
This allows reuse and provides better abstraction of the backends. It
will be useful to avoid compiling the sPAPR IOMMU backend on targets
not supporting it.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This will help in converting the sPAPR IOMMU backend to a QOM interface.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Convert the legacy VFIOIOMMUOps struct to the new VFIOIOMMU QOM
interface. The set of of operations for this backend can be referenced
with a literal typename instead of a C struct. This will simplify
support of multiple backends.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
VFIOContainerBase was not introduced as an abstract QOM object because
it felt unnecessary to expose all the IOMMU backends to the QEMU
machine and human interface. However, we can still abstract the IOMMU
backend handlers using a QOM interface class. This provides more
flexibility when referencing the various implementations.
Simply transform the VFIOIOMMUOps struct in an InterfaceClass and do
some initial name replacements. Next changes will start converting
VFIOIOMMUOps.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This allows to abstract a bit more the sPAPR IOMMU support in the
legacy IOMMU backend.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
There is no universal BIOS, each machine needs a specific one.
Move the machine-specific definitions to each machine code and
remove this bogus header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231122184334.18201-1-philmd@linaro.org>
xive2_regs.h only requires declarations from "qemu/bswap.h".
Include it instead of the huge target-specific "cpu.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20231122183920.17905-1-philmd@linaro.org>
'next_cpu' was converted to 'node' in commit bdc44640cb
("cpu: Use QTAILQ for CPU list").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231129183243.15859-1-philmd@linaro.org>
The dynamic state tracing was removed in commit d0aaf08bb9.
Fixes: d0aaf08bb9 ("tcg: remove the final vestiges of dstate")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231129182734.15565-1-philmd@linaro.org>
Add a helper to return a machine default CPU type.
If this machine is restricted to a single CPU type,
use it as default, obviously.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231116163726.28952-1-philmd@linaro.org>
Add helper cpu_model_from_type() to extract the CPU model name from
the CPU type name in two circumstances: (1) The CPU type name is the
combination of the CPU model name and suffix. (2) The CPU type name
is same to the CPU model name.
The helper will be used in the subsequent commits to conver the
CPU type name to the CPU model name.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231114235628.534334-6-gshan@redhat.com>
[PMD: Mention returned string must be released with g_free()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the memory listener to a common place rather than always in the
first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-14-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The memory listener functions can call these too. Make vdpa_iommu work
with VhostVDPAShared.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-13-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The callers only have the shared information by the end of this series.
Start converting this functions.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-12-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the iommu_list member to VhostVDPAShared so all vhost_vdpa can use
it, rather than always in the first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-11-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is always VHOST_IOTLB_MSG_V2. We can always make it back per
vhost_dev if needed.
This change makes easier for vhost_vdpa_map and unmap not to depend on
vhost_vdpa but only in VhostVDPAShared.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-10-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the backend_cap member to VhostVDPAShared so all vhost_vdpa can use
it, rather than always in the first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-9-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the iotlb_batch_begin_sent member to VhostVDPAShared so all
vhost_vdpa can use it, rather than always in the first / last
vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-8-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the file descriptor to VhostVDPAShared so all vhost_vdpa can use
it, rather than always in the first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-7-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the shadow_data member to VhostVDPAShared so all vhost_vdpa can use
it, rather than always in the first or last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-5-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the iova range to VhostVDPAShared so all vhost_vdpa can use it,
rather than always in the first or last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-4-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the iova tree to VhostVDPAShared so all vhost_vdpa can use it,
rather than always in the first or last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-3-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It will hold properties shared among all vhost_vdpa instances associated
with of the same device. For example, we just need one iova_tree or one
memory listener for the entire device.
Next patches will register the vhost_vdpa memory listener at the
beginning of the VM migration at the destination. This enables QEMU to
map the memory to the device before stopping the VM at the source,
instead of doing while both source and destination are stopped, thus
minimizing the downtime.
However, the destination QEMU is unaware of which vhost_vdpa struct will
register its memory_listener. If the source guest has CVQ enabled, it
will be the one associated with the CVQ. Otherwise, it will be the
first one.
Save the memory operations related members in a common place rather than
always in the first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-2-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds support for vhost-scsi to be able to create a worker thread
per virtqueue. Right now for vhost-net we get a worker thread per
tx/rx virtqueue pair which scales nicely as we add more virtqueues and
CPUs, but for scsi we get the single worker thread that's shared by all
virtqueues. When trying to send IO to more than 2 virtqueues the single
thread becomes a bottlneck.
This patch adds a new setting, worker_per_virtqueue, which can be set
to:
false: Existing behavior where we get the single worker thread.
true: Create a worker per IO virtqueue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231204231618.21962-3-michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This adds the vhost backend callouts for the worker ioctls added in the
6.4 linux kernel commit:
c1ecd8e95007 ("vhost: allow userspace to create workers")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231204231618.21962-2-michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
