When writing this code it was assumed that register 0x118000 is the
buffer access mode for color map accesses. It turned out that this
is wrong. Instead register 0x118000 sets both src and dst buffer
access mode at the same time.
This required a larger rewrite of the code. The good thing is that
both the linear framebuffer and the register based vram access can
now be combined into one function.
This makes the linux 'stifb' framebuffer work, and both HP-UX 10.20
and HP-UX 11.11 are still working.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Helge Deller <deller@gmx.de>
Almost all PA-RISC machines have either a button that is labeled with 'TOC' or
a BMC/GSP function to trigger a TOC. TOC is a non-maskable interrupt that is
sent to the processor. This can be used for diagnostic purposes like obtaining
a stack trace/register dump or to enter KDB/KGDB in Linux.
This patch adds support for such an emulated TOC button.
It wires up the qemu monitor "nmi" command to trigger a TOC. For that it
provides the hppa_nmi function which is assigned to the nmi_monitor_handler
function pointer. When called it raises the EXCP_TOC hardware interrupt in the
hppa_cpu_do_interrupt() function. The interrupt function then calls the
architecturally defined TOC function in SeaBIOS-hppa firmware (at fixed address
0xf0000000).
According to the PA-RISC PDC specification, the SeaBIOS firmware then writes
the CPU registers into PIM (processor internal memmory) for later analysis. In
order to write all registers it needs to know the contents of the CPU "shadow
registers" and the IASQ- and IAOQ-back values. The IAOQ/IASQ values are
provided by qemu in shadow registers when entering the SeaBIOS TOC function.
This patch adds a new aritificial opcode "getshadowregs" (0xfffdead2) which
restores the original values of the shadow registers. With this opcode SeaBIOS
can store those registers as well into PIM before calling an OS-provided TOC
handler.
To trigger a TOC, switch to the qemu monitor with Ctrl-A C, and type in the
command "nmi". After the TOC started the OS-debugger, exit the qemu monitor
with Ctrl-A C.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This brings the hppa_hardware.h file in sync with the copy in the
SeaBIOS-hppa sources.
In order to support up to 16 CPUs, it's required to move the HPA for
MEMORY_HPA out of the address space of the new 16th CPU.
The new address of 0xfffff000 worked well for Linux and HP-UX, while
other addresses close to the former 0xfffbf000 area are used by the
architecture for local and global broadcasts.
The PIM_STORAGE_SIZE constant is used in SeaBIOS sources and
is relevant for the TOC/NMI feature.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
New firmware features and fixes:
* Allow up to 16 CPUs
* Add TOC button support:
To trigger a TOC, execute "nmi" in the qemu monitor (Ctrl-A C)
* New opt/hostid fw_cfg option to change hostid:
-fw_cfg opt/hostid,string=334455
* Add opt/console fw_cfg option to select default console:
-fw_cfg opt/console,string=serial
-fw_cfg opt/console,string=graphics
* Add Linux TER16x32 font to STI firmware:
-fw_cfg opt/font,string=2
* Leave IRQs disabled after rendevouz
Signed-off-by: Helge Deller <deller@gmx.de>
The clang in Ubuntu 18.04 (10.0.0-4ubuntu1) produces a warning
on the code added in commit f5ef0e518d where we use a
shifted expression in a boolean context:
../../linux-user/elfload.c:2423:16: error: converting the result of '<<' to a boolean always evaluates to true [-Werror,-Wtautological-constant-compare]
} else if (LO_COMMPAGE) {
^
../../linux-user/elfload.c:1102:22: note: expanded from macro 'LO_COMMPAGE'
#define LO_COMMPAGE TARGET_PAGE_SIZE
^
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/cpu-all.h:231:31: note: expanded from macro 'TARGET_PAGE_SIZE'
#define TARGET_PAGE_SIZE (1 << TARGET_PAGE_BITS)
^
1 error generated.
The warning is bogus because whether LO_COMMPAGE is zero or not
depends on compile-time ifdefs; shut the compiler up by adding
an explicit comparison to zero.
Fixes: f5ef0e518d ("linux-user/nios2: Map a real kuser page")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20220111082900.3341274-1-peter.maydell@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is PR_CAPBSET_READ, PR_CAPBSET_DROP and the "legacy"
PR_CAP_AMBIENT PR_GET_SECUREBITS, PR_SET_SECUREBITS.
All of these arguments are integer values only, and do not
require mapping of values between host and guest.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220106225738.103012-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Convert the host signal number to guest signal number
before returning the value to the guest.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220106225738.103012-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The kernel does not special-case arg2 != NULL, so
neither should we.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220106225738.103012-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Place it next to copy_from/to_user_oabi_flock64, the only users,
inside the existing target-specific ifdef. This leaves only
generic ipc structs in target_structs.h.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220107042600.149852-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-25-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-24-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-23-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-22-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fix missing PC from EXCP_DEBUG by
merging the case with EXCP_BREAKPOINT.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-21-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
The fault address for POWERPC_EXCP_ISI is nip exactly, not nip - 4.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-20-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-19-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Simplify cpu_loop by doing all of the decode in translate.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-18-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Simplify cpu_loop by doing all of the decode in translate.
This fixes a bug in that cpu_loop was not handling the
different layout of the R6 version of break16. This fixes
a bug in that cpu_loop extracted the wrong bits for the
mips16e break16 instruction.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-17-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP
and SIGFPE; use force_sig (SI_KERNEL) for EXCP_DSPDIS.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-16-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rename to do_tr_or_bp, as per the kernel function.
Add a 'trap' argument, akin to the kernel's si_code, but clearer.
The return value is always 0, so change the return value to void.
Use force_sig and force_sig_fault.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-15-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix a typo for ESR_EC_DIVZERO, which is integral not floating-point.
Fix the if ladder for decoding floating-point exceptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-14-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Replace the local gen_signal with the generic functions that match
how the kernel raises signals. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reduce the number of ifdefs within cpu_loop().
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This si_code was changed in 75abf64287cab, for linux 4.17.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This define is unused, and we have no similar define for
the other signal sub-codes.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These si_codes have been properly set by the kernel since the beginning.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP
and missing si_code for SIGBUS.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This si_code was changed in 4cc13e4f6d441, for linux 4.17.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These si_codes were changed in 535906c684fca, for linux 4.17.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- Add SDHC support for SD card SPI-mode (Frank Chang)
-----BEGIN PGP SIGNATURE-----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=PEEr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd/tags/sdmmc-20220108' into staging
SD/MMC patches queue
- Add SDHC support for SD card SPI-mode (Frank Chang)
# gpg: Signature made Sat 08 Jan 2022 21:56:02 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd/tags/sdmmc-20220108:
hw/sd: Add SDHC support for SD card SPI-mode
hw/sd/sdcard: Rename Write Protect Group variables
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: b2fcb0c575
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20220107153019.504124-1-sw@weilnetz.de
Signed-off-by: John Snow <jsnow@redhat.com>
Mypy 0.930, released Dec 22, changes the way argparse objects are
considered. Crafting a definition that works under Python 3.6 and an
older mypy alongside newer versions simultaneously is ... difficult,
so... eh. Stub it out with an 'Any' definition to get the CI moving
again.
Oh well.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220110191349.1841027-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
0.920 (Released 2021-12-15) is not entirely happy with the
way that I was defining _FutureT:
qemu/aqmp/protocol.py:601: error: Item "object" of the upper bound
"Optional[Future[Any]]" of type variable "_FutureT" has no attribute
"done"
Update it with something a little mechanically simpler that works better
across a wider array of mypy versions.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20220110191349.1841027-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
pylint's dependency astroid appears to have bugs in 2.9.1 and 2.9.2 (Dec
31 and Jan 3) that appear to erroneously expect the qemu namespace to
have an __init__.py file. astroid 2.9.3 (Jan 9) avoids that problem, but
appears to not understand a relative import within a namespace package.
Update the relative import - it was worth changing anyway, because these
packages will eventually be packaged and distributed separately.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220110191349.1841027-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This reverts commit 316011b8a7.
Fixes: 316011b8a7 ("virtio-pci: decouple the single vector from the interrupt process")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 8806237234.
Fixes: 8806237234 ("vhost: introduce new VhostOps vhost_set_config_call")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 634f7c89fb.
Fixes: 634f7c89fb ("vhost-vdpa: add support for config interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 081f864f56.
Fixes: 081f864f56 ("virtio: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit f7220a7ce2.
Fixes: f7220a7ce2 ("vhost: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
