Double semicolons should be single.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
string is allocated by g_malloc, will not be used after putenv, should be
free before return.
Paolo Bonzini <pbonzini@redhat.com> confirmed this is safe under Wine:
"1) the underlying Win32 APIs require separate arguments for the
variable and value; 2) even though in the end Wine stores the
environment as name=value
(http://source.winehq.org/source/dlls/ntdll/env.c), it does so in a
single consecutive block of memory, not as a char* array like POSIX
does. While (2) might apply only to Wine, (1) surely applies to Windows
as well."
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Print a banner comment at the top of config.log identifying
when configure was run and the arguments used. This is occasionally
useful for debugging purposes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Include the name of the #define being tested for in the compiler
error produced when a check_define test is run and fails. This
appears only in the config.log, but it does make it a little easier
to debug problems by inspecting config.log.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Falls through to 32 bpp. Harmless, because the only difference is the
alpha component, and we're not using that. Spotted by Coverity.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
It falls through to the code for CSI K. "Erase Down" also does "Erase
End of Line", "Erase Up" also does "Erase Start of Line", and "Erase
Screen" also does "Erase Line". Happens not to be visible. Fix it
anyway. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Ignore attempts to complete non-existent IRQs; this fixes a buffer
overrun if the guest writes a bad value to the GICC_EOIR register.
(This case is UNPREDICTABLE so ignoring it is a valid choice.)
Note that doing nothing if the guest writes 1023 to this register
is not in fact a change in behaviour: the old code would also
always do nothing in this case but in a non-obvious way.
(The buffer overrun was noted by Coverity, see bug 887883.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Drop the distinction between armv4l/armv4b in the $cpu variable
(ie host cpu type) in favour of calling everything 'arm'. This
makes it the same as the ARCH setting and removes some special
casing. The only thing we were using the distinction for was to
decide which endianness to use in cross compilation; do a cpp
define check there instead.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
spapr_populate_pci_devices() containd a loop with PCI_NUM_REGIONS (7)
iterations. However this overruns the 'bars' global array, which only has
6 elements. In fact we only want to run this loop for things listed in the
bars array, so this patch corrects the loop bounds to reflect that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Clarify some slightly misleading comments in the Thumb decoder's
handling of the memory hint space -- in particular one code path
marked as 'UNPREDICTABLE or unallocated hint' also includes some
legitimate preload instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Two of the calls to hw_error() in arm_timer.c contain the wrong function name.
As suggested by Andreas Färber, use the C99 standard __func__ macro to
get the correct name, instead of putting the name directly into the code.
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Many places in QEMU call qemu_aio_flush() to complete all pending
asynchronous I/O. Most of these places actually want to drain all block
requests but there is no block layer API to do so.
This patch introduces the bdrv_drain_all() API to wait for requests
across all BlockDriverStates to complete. As a bonus we perform checks
after qemu_aio_wait() to ensure that requests really have finished.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Debugging a reentrant request deadlock was fun but in the future we need
a quick and obvious way of detecting such bugs. Add an assert that
checks we are not about to deadlock when waiting for another request.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cases beyond the end of the disk image are only implemented for block
drivers that do not provide .bdrv_co_is_allocated(). It's worth making
these cases generic so that block drivers that do implement
.bdrv_co_is_allocated() also get them for free.
Suggested-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that bdrv_co_is_allocated() is available we can use it instead of
the synchronous bdrv_is_allocated() interface. This is a follow-up that
Kevin Wolf <kwolf@redhat.com> pointed out after applying the series that
introduces bdrv_co_is_allocated().
It is safe to make cow_read() a coroutine_fn because its only caller is
a coroutine_fn.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the -drive copy-on-read=on|off command-line option:
copy-on-read=on|off
copy-on-read is "on" or "off" and enables whether to copy read backing
file sectors into the image file. Copy-on-read avoids accessing the
same backing file sectors repeatedly and is useful when the backing
file is over a slow network. By default copy-on-read is off.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Detect overlapping requests and remember to align to cluster boundaries
if the image format uses them. This assumes that allocating I/O is
performed in cluster granularity - which is true for qcow2, qed, etc.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When copy-on-read is enabled it is necessary to wait for overlapping
requests before issuing new requests. This prevents races between the
copy-on-read and a write request.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_enable_copy_on_read()/bdrv_disable_copy_on_read() functions can
be used to programmatically enable or disable copy-on-read for a block
device. Later patches add the actual copy-on-read logic.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block layer does not know about pending requests. This information
is necessary for copy-on-read since overlapping requests must be
serialized to prevent races that corrupt the image.
The BlockDriverState gets a new tracked_request list field which
contains all pending requests. Each request is a BdrvTrackedRequest
record with sector_num, nb_sectors, and is_write fields.
Note that request tracking is always enabled but hopefully this extra
work is so small that it doesn't justify adding an enable/disable flag.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's common to wake up all waiting coroutines. Introduce the
qemu_co_queue_restart_all() function to do this instead of looping over
qemu_co_queue_next() in every caller.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add macros for aligning a number to a multiple, for example:
QEMU_ALIGN_DOWN(500, 2000) = 0
QEMU_ALIGN_UP(500, 2000) = 2000
Since ALIGN_UP() is a common macro name use the QEMU_* namespace prefix.
Hopefully this will protect us from included headers that leak something
with a similar name.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch introduces the public bdrv_co_is_allocated() interface which
can be used to query image allocation status while the VM is running.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that all block drivers have been converted to
.bdrv_co_is_allocated() we can drop .bdrv_is_allocated().
Note that the public bdrv_is_allocated() interface is still available
but is in fact a synchronous wrapper around .bdrv_co_is_allocated().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The cow block driver does not keep internal state for cluster lookups.
This means it is safe to perform cluster lookups in coroutine context
without risk of race conditions that corrupt internal state.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is trivial to switch from the synchronous .bdrv_is_allocated()
interface to .bdrv_co_is_allocated() since vdi_is_allocated() does not
block.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is trivial to switch from the synchronous .bdrv_is_allocated()
interface to .bdrv_co_is_allocated() since vvfat_is_allocated() does not
block.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qcow2, qcow, and vmdk block drivers are based on coroutines. They have a
coroutine mutex which protects internal state. We can convert the
.bdrv_is_allocated() function to .bdrv_co_is_allocated() by holding the mutex
around the cluster lookup operation.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_qed_is_allocated() function is a synchronous wrapper around
qed_find_cluster(), which performs the cluster lookup. In order to
convert the synchronous function to a coroutine function we yield
instead of using qemu_aio_wait(). Note that QED's cache is already safe
for parallel requests so no locking is needed.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the .bdrv_co_is_allocated() interface which is identical
to .bdrv_is_allocated() but runs in coroutine context. Running in
coroutine context implies that other coroutines might be performing I/O
at the same time. Therefore it must be safe to run while the following
BlockDriver functions are in-flight:
.bdrv_co_readv()
.bdrv_co_writev()
.bdrv_co_flush()
.bdrv_co_is_allocated()
The new .bdrv_co_is_allocated() interface is useful because it can be
used when a VM is running, whereas .bdrv_is_allocated() is a synchronous
interface that does not cope with parallel requests.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no need for bdrv_commit() to use the BlockDriver
.bdrv_is_allocated() interface directly. Converting to the public
interface gives us the freedom to drop .bdrv_is_allocated() entirely in
favor of a new .bdrv_co_is_allocated() in the future.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the bdrv_read() of the snapshot's L1 table fails, return the right
error code and make sure that the old L1 table is still loaded and we
don't break the BlockDriverState completely.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
First the snapshot must be deleted and only then the refcounts can be
decreased.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The refcount updates must be moved so that in the worst case we can get
cluster leaks, but refcounts may never be too low.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Besides fixing the return code, this adds some comments that make clear
how the code works and that it potentially breaks images if we fail in
the wrong place. Actually fixing this is left for the next patch.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Increase refcounts only after allocating a new L1 table has succeeded in
order to make leaks less likely. If writing the snapshot table fails,
revert in-memory state to be consistent with that on disk.
While at it, make it return the real error codes instead of -1.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
sn->id_str could be leaked before this. The rest of this patch changes
comments, fixes coding style or removes checks that are unnecessary with
g_malloc.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Failing in the middle wouldn't help with the integrity of the image, so
doing everything in a single request seems better.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Doesn't immediately fix anything as the callers don't use the return
value, but they will be fixed next.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
