Add pointer to USBPacket to all tracepoints tracking requests to make it
easier to identify them when multiple requests are in flight.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When passing through a usb pendrive seabios will present it in the F12
boot menu and will happily boot from it.
This patch adds bootorder support so you can even make it the default
boot device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When we queue up usb packets we may happen to find a already queued
packet, which also might be finished at that point already. We don't
want continue processing the packet at this point though, so lets
just signal back we've found a in-flight packet when in queuing mode.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Not only QHs can form rings, but TDs too. With the new
queuing/pipelining support we are following TD chains and
can actually walk in circles. An assert() prevents us from
entering an endless loop then.
Fix is easy: Just stop queuing when we figure the TD we are
about to queue up is in flight already.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
... to make vmstate id string truely unique with multiple host
controllers, i.e. move from "1/usb-ptr" to "0000:00:01.3/1/usb-ptr"
(usb tabled connected to piix3 uhci).
This obviously breaks migration. To handle this the usb bus
property "full-path" is added. When setting this to false old
behavior is maintained. This way current qemu will be compatible
with old versions when started using '-M pc-$oldversion'.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Basically, the main wait loop calls qemu_run_all_timers() unconditionally. The
first thing this routine used to do is to see if a timer had been serviced,
and then reset the loop timeout to the next deadline.
However, the new deadlines had not been calculated at that point, as
qemu_run_timers() had not been called yet for each of the clocks. So
qemu_rearm_alarm_timer() would end up with a negative or zero deadline, and
default to setting a 250us timeout for the loop.
As qemu_run_timers() is called for each clock, the real deadlines would be put
in place, but because a loop timeout was already set, the loop timeout would
not be changed.
Once that 250us timeout fired, the real deadline would be used for the
subsequent timeout.
For idle VMs, this effectively doubles the number of times through the loop,
doubling the number of select() system calls, timer calls, etc. putting added
scheduling pressure on the kernel. And under cgroups, this really causes a big
problem because the cgroup code does not scale well.
By simply running the timers before trying to rearm the timer, we always rearm
with a non-zero deadline, effectively halving the number of system calls.
Signed-off-by: Peter Portante <pportant@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kiszka/queues/pending:
vapic: Disable for pre-1.1 machines
Kick io-thread on qemu_chr_accept_input
pcnet: Properly handle TX requests during Link Fail
pcnet: Clear ERR in CSR0 on stop
signrom: Rewrite as python script
Conflicts:
hw/pc_piix.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* sstabellini/for_anthony:
xen: introduce an event channel for buffered io event notifications
xen-mapcache: don't unmap locked entry during mapcache invalidation
Xen, mapcache: Fix the compute of the size of bucket.
xen: handle backend deletion from xenstore
Xen: Add xen-apic support and hook it up.
Xen: basic HVM MSI injection support.
Once a chr frontend is able to receive input again, we need to inform
the io-thread about this fact. Otherwise, main_loop_wait may continue to
select without the related backend file descriptor in its set. This can
cause high input latencies if only low-rate events arrive otherwise.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
As long as we have no link and we aren't in internal loopback mode, no
packet must be sent. Instead, LCAR needs to be set in any active TX
descriptor and also CERR in CSR0.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
pcnet_stop already clears any reason (BABL, CERR, MISS, MERR) why ERR
(bit 15) should be set in CRS0. So we have to clear that bit as well.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Now that we have a hard dependency on python anyway, we can replace the
slow shell script to calculate the option ROM checksum with a fast AND
portable python version. Tested both with python 2.7 and 3.1.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
* 'w64' of git://qemu.weilnetz.de/qemu:
w64: Fix time conversion for some versions of MinGW-w64
nbd: Fix compiler warning (w64)
disas: Replace 'unsigned long' by 'uintptr_t'
cpu-exec: Remove non-portable type cast and fix format string
target-mips: Fix type cast for w64 (uintptr_t)
w64: Fix type cast in os_host_main_loop_wait
w64: Fix data types in softmmu*.h
w64: Use uintptr_t in exec.c
softmmu: Use uintptr_t for physaddr and rename it
w64: Fix struct CPUTLBEntry
w64: Fix definition of setjmp
w32: Move defines for socket specific errors to qemu-os-win32.h
w64: Use larger alignment for section with generated code
w64: Fix data types in cpu-all.h, exec.c
w64: Fix type casts used in some macros in cpu-all.h
tcg/i386: Add support for w64 ABI
tcg/i386: Use GDB JIT debugging interface only for hosts with ELF
tb.time is a time value, but not necessarily of the same size as time_t:
while time_t is 64 bit for w64, tb.time still is 32 bit only.
Therefore we need en explicit conversion.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Casting a pointer to an integer must use (DWORD_PTR) instead of (DWORD).
This also matches the definition of 'fd' (gint for w32, gint64 for w64).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Replace all type casts to 'long' or 'unsigned long' by 'intptr_t' or 'uintptr_t'.
For type casts which are only used to extract the lower bits of an address
or to modify those bits, signedness does not matter. There I always use 'uintptr_t'.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Variable physaddr is a host address which should be represented by
data type 'uintptr_t'.
This is needed for w64 and changes nothing for other hosts.
v2:
Rename physaddr -> hostaddr (suggested by Blue Swirl).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
For w64, some entries need 'uintptr_t' instead of 'unsigned long'.
For other host systems, both data types are identical, so nothing changes.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The default definition of setjmp which is implemented in MinGW-w64
cannot be used with programs like QEMU which call longjmp from
code without structured exception handling (SEH).
This code therefore disables stack unwinding.
We could also implement SEH for QEMU's generated JIT code, but
that is much more difficult. Stack unwinding would also cost
execution time.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
As those defines are only used for w32,
they should be in the header file for w32.
All files which include slirp.h or qemu_socket.h also
include qemu-os-win32.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
w64 uses the registers rcx, rdx, r8 and r9 for function arguments,
so it needs a different declaration of tcg_target_call_iarg_regs.
rax, rcx, rdx, r8, r9, r10 and r11 may be changed by function calls.
rbx, rbp, rdi, rsi, r12, r13, r14 and r15 remain unchanged by function calls.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Not all i386 / x86_64 hosts use ELF.
Ask the compiler whether ELF is used.
On w64, gdb crashes when ELF_HOST_MACHINE is defined.
Cc: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf:
pseries: Fix reset of VIO network device
pseries: Reset vscsi properly
pseries: Correctly use the device model reset hooks
pseries: Remove old hcalls hook stub
pseries: Remove old debug leftovers from spapr_vscsi
pseries: Fix RTAS based config access
target-ppc/machine.c: Drop unnecessary ifdefs
target-ppc: Init dcache and icache size for e500 user mode
target-ppc: Fix type casts for w64 (uintptr_t)
target-ppc: QOM'ify CPU reset
target-ppc: Start QOM'ifying CPU init
target-ppc: QOM'ify CPU
target-ppc: Add hooks for handling tcg and kvm limitations
target-ppc: Drop cpu_ppc_close()
pseries: Consolidate hack for RTAS display-character usage
pseries: Remove unused fields from VIOsPAPRBus structure
pseries: Implement RTAS system-reboot call
pseries: Fix bug with reset of VIO CRQs
pseries: Clean up hcall_dprintf() debugging messages
PPC: Fix TLB invalidation bug within the PPC interrupt handler.
Currently, the PAPR VIO network device does not have a reset handler. This
means that after a hard reset, H_REGISTER_LOGICAL_LAN will return an error
when the new guest boot attempts to initialize the device.
This patch corrects this, adding a suitable reset hook.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Currently the PAPR vscsi implementation does not properly clear its table
of request tags when the system is reset. This patch adds a reset hook
to do so.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Recently we added code to properly clean away VIO CRQs on reset However,
this directly uses qemu_register, rather than the existing device model
reset callbacks. This patch cleans this up by adding proper use of the
reset hook to the VIO bus model. The existing CRQ reset code is converted
to the new method.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some time ago we removed all use of the 'hcalls' callback in the pseries
VIO code, which was used to workaround an ordering problem which has since
been solved properly. However, the function pointer for the hook remains.
This patch cleans it away.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The PAPR VSCSI emulation contains a few lines of code which were once used
for debug but now do nothing at all. This patch removes them.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
On the pseries platform, access to PCI config space is via RTAS calls(
which go to the hypervisor) rather than MMIO. This means we don't use
the same code path as nearly everyone else which goes through pci_host.c
and we're missing some of the parameter checking along the way.
We do have some parameter checking in the RTAS calls, but it's not enough.
It checks for overruns, but does not check for unaligned accesses,
oversized accesses (which means the guest could trigger an assertion
failure from pci_host_config_{read,write}_common(). Worse it doesn't do
the basic checking for the number of RTAS arguments and results before
accessing them.
This patch fixes these bugs.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[AF: Fix typos spotted by mst]
Signed-off-by: Andreas Färber <afaerber@suse.de>
This is Diamond 233L Standard Core Rev.C (LE), implemented through
linux/gdb overlay.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
For QOM'ified CPUs we cannot g_free() CPUArchState, we must
object_delete() the object it is embedded into.
Fixes LP#982321 (invalid free() while executing pacman with qemu-arm).
Reported-by: Serge Schneider <serge@xecdesign.com>
Reported-by: Russell Keith Davis <russell@russelldavis.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Serge Schneider <serge@xecdesign.com>
Tested-by: Russell Keith Davis <russell@russelldavis.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
machine.c is only compiled for softmmu targets, so checks for
!defined(CONFIG_USER_ONLY) are unnecessary and can be dropped.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[AF: Use more verbose commit message suggested by PMM]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
commit f7aa558396 pulled the dcache and icache
line size initialization inside of a '#if !defined(CONFIG_USER_ONLY)' block.
This is not correct because instructions like 'dcbz' need the dcache size
initialized even for user mode.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Cc: Varun Sethi <Varun.Sethi@freescale.com>
[AF: Simplify #ifdefs by using cache line size 32 for *-user as before]
Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
