We never actually stored the stringified double values into the strings
before we did the comparisons. This left number/double values completely
uncovered in test-visitor-serialization tests.
Fixing this exposed a bug in our handling of large whole number values
in QEMU's JSON parser which is now fixed.
Simplify the code while we're at it by dropping the
calc_float_string_storage() craziness in favor of GStrings.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Large integers previously got capped to LLONG_MAX/LLONG_MIN so we could
store them as int64_t. This could lead to silent errors occuring.
Now, we use a double to handle these cases.
Add a test to confirm that QMPInputVisitor handles this as expected if
we're expected an integer value: errors for out of range integer values
that got promoted to doubles in this fashion.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
# By Christophe Lyon (1) and others
# Via Michael Tokarev
* mjt/trivial-patches:
target-moxie: replace target_phys_addr_t with hwaddr
Rename hexdump to avoid FreeBSD libutil conflict
remove some double-includes
translate: remove redundantly included qemu/timer.h
Remove twice include of qemu-common.h
fix /proc/self/maps output
Message-id: 51977B44.1000302@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This change makes sure that modifications of pos field in the DSPControl
register do not trash other bits in the register. This bug can be triggered
with the additional test case in mips32-dsp/extpdp.c in this commit.
In addition to this, this change corrects incorrect calculation of the mask
for EXTPDP.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Some source files #include the same header more than
once for no good reason. Remove second #includes in
such cases.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The mask for EXTP instruction when size=31 has not been correctly
calculated.
The test (mips32-dsp/extp.c) has been extended to include the case that
triggers the issue.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
# By Michael Roth (1) and Zhangleiqiang (1)
# Via Luiz Capitulino
* luiz/queue/qmp:
qapi: fix leak in unit tests
qmp: fix handling of cmd with Equals in qmp-shell
Message-id: 1368625179-27962-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The test case passes on big endian hosts now (tested on ppc64)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1368622839-7084-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qmp_output_get_qobject() increments the qobject's reference count. Since
we currently pass this straight into qobject_to_json() so we can feed
the data into a QMP input visitor, we never actually free the underlying
qobject when qmp_output_visitor_cleanup() is called. This causes leaks
on all of the QMP serialization tests.
Fix this by holding a pointer to the qobject and decref'ing it before
returning from qmp_deserialize().
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
# By Kevin Wolf (7) and Fam Zheng (3)
# Via Kevin Wolf
* kwolf/for-anthony:
qemu-iotests: fix 017 018 for vmdk
qemu-iotests: exclude vmdk and qcow from 043
qemu-iotests: exclude vmdk for test 042
qtest/ide-test: Test short and long PRDTs
qtest/ide-test: Add simple DMA read/write test case
qtest: Add IDE test case
libqos/pci: Enable bus mastering
ide: Reset BMIDEA bit when the bus master is stopped
de_DE.po: Add missing leading spaces
ahci: Don't allow creating slave drives
Message-id: 1368023344-29731-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corner case for INSV instruction when size=32 has not been correctly
implemented. The mask for size should be one bit wider, and preparing the
filter variable should be aware of this case too.
The test for INSV has been extended to include the case that triggers the
bug.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
017 and 018 use /bin/mv to move base img from t.IMGFMG to t.IMGFMT.base
after filling data, this is not enough for vmdk, when t.IMGFMT is only a
description text file who points to t-{flat,s001,f001,...}.IMGFMT as
data extent, so testing such subformats alway fails on them.
This patch use the trick of temprorily changing TEST_IMG to avoid using
/bin/mv.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
043 tests recursive backing file by changing backing file. VMDK has not
implemented this yet, and qcow1 probably never will.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Zero sized disk is not supported by qemu vmdk driver, exclude vmdk from
the test script.
As tested on vmware-vdiskmanager and vmware workstation, zero sized disk
is not supported by vmware, either.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests the behaviour of the DMA engine when the given PRDT contains
physical region descriptors for either more or less bytes than the
IDE request is for.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a simple IDE test case and starts by verifying that IDENTIFY
can be successfully used and return the correct serial number, version
and the WCE flag is set for cache=writeback.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit c4efe1cada (qtest: add libqos
including PCI support) created a libqos/ subdirectory but left the
existing I2C libqos files libi2c*.[hc] in tests/. Clean this up.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367502986-15104-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Fam Zheng (8) and others
# Via Stefan Hajnoczi
* stefanha/block:
qemu-iotests: Filter out 'adapter_type'
nbd: support large NBD requests
nbd: use g_slice_new() instead of a freelist
qemu-iotests: Filter out vmdk creation options
vmdk: add bdrv_co_write_zeroes
vmdk: store fields of VmdkMetaData in cpu endian
vmdk: change magic number to macro
vmdk: Add option to create zeroed-grain image
vmdk: add support for “zeroed‐grain” GTE
vmdk: named return code.
blockdev: Replace "undefined error" in qmp_block_resize
block: add read-only support to VHDX image format.
block: initial VHDX driver support framework - supports open and probe
block: vhdx header for the QEMU support of VHDX images
qemu: add castagnoli crc32c checksum algorithm
Filter out vmdk creation option 'adapter_type' for vmdk. So that tests
with an explicit './check -o adapter_type=XXX' will not fail.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This change corrects and simplifies how discard is calculated for shift
left logical vector instructions. It is used to detect overflow and set bit
22 in the DSPControl register.
The existing tests (shll_ph.c, shll_qb.c) are extended with the corner cases
that expose incorrectness in the previous implementation.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Cover new image creation options for vmdk, so we can use '-o
zeroed_grain=XXX' and '-o subformat=XXX' to run the tests successfully.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
libqtest.c can segfault when calling fclose() if the pidfile wasn't
opened successfully. This patch fixes the issue.
Signed-off-by: Jesse Larrew <jlarrew@linux.vnet.ibm.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1367250772-17928-1-git-send-email-jlarrew@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The fw_cfg ABI is Little Endian, so byte-swap the generically read
byte array to host endianness.
This unbreaks the fw_cfg tests on ppc.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367167547-19931-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We don't want to commit to the API yet before everything is worked out.
Disable it for the 1.5 release. This commit is meant to be reverted
after the 1.5 release.
The disabling of the driver-specific options is achieved by applying the
old checks while parsing the command line.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Test that qemu-img convert -c works when input image length is not a
multiple of the cluster size.
Previously an error message would be produced:
qemu-img: error while compressing sector 0: Input/output error
Now that qcow2 and qcow handle this case the test passes successfully.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Specifying the wrong driver could fail an assertion:
$ qemu-system-x86_64 -drive file.driver=qcow2,file=x
qemu-system-x86_64: block.c:721: bdrv_open_common: Assertion `file !=
((void *)0)' failed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
$QEMU_PROG happens to be 'qemu' in my setup, so this sed command
replaces a bit too much. Restrict it to the start of the line and to
when it's followed by a colon, i.e. the form used by error messages.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This tests PAM settings for the i440fx. This test does a lot of
byte MMIO which is fairly slow with qtest today. But the test
does complete in under 2 seconds.
We don't fully emulate PAM largely because of limitations with
KVM so we #if 0 that part of the test case.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366123521-4330-7-git-send-email-aliguori@us.ibm.com
This test compares all of the default register values against the
spec. It turns out we deviate in quite a few places. These
places are really only visible to the BIOS though which is why
this hasn't created any problems.
The deviation actually happens in the core PCI layer so I suspect
it's not a simple fix if we really care to fix it. For now, just
disable the affected checks.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366123521-4330-6-git-send-email-aliguori@us.ibm.com
This is a very simple allocator for the PC platform. It should
be possible to add backends for other platforms.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366123521-4330-5-git-send-email-aliguori@us.ibm.com
fw_cfg is needed to get the top of memory which is necessary for
doing PCI allocation and allocating RAM for DMA.
Add a PC version of fw_cfg and enough abstraction to support other
platforms.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366123521-4330-4-git-send-email-aliguori@us.ibm.com
This includes basic PCI support for the PC platform. Enough
abstraction should be present to support non-PC platforms too.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366123521-4330-3-git-send-email-aliguori@us.ibm.com
Currently we waitpid on the child process we spawn off that does
nothing more than system() another process. While this does not
appear to be incorrect, it's wasteful and confusing so get rid of
it.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366123521-4330-2-git-send-email-aliguori@us.ibm.com
The operands for MAQ_SA_W.PHL/MAQ_SA_W.PHR must in specified format.
Otherwise, the results are unpredictable. Once the operands were corrected
in the tests (part of this change), a bug in mipsdsp_mul_q15_q15 became
visible.
This change corrects the tests for MAQ_SA_W.PHL/MAQ_SA_W.PHR and fixes
sign-related issue in mipsdsp_mul_q15_q15. It also removes unnecessary
comment.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Note in order to run these tests on ssh, you must be running a local
ssh daemon, and that daemon must accept loopback connections, and
ssh-agent has to be set up to allow logins on the local daemon. In
other words, the following command should just work without demanding
any passphrase:
ssh localhost
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Filter the name of the QEMU executable so the output can be diffed no
matter what QEMU_PROG is (e.g. qemu-system-x86_64).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Known bugs in to_json():
* A start byte for a three-byte sequence followed by less than two
continuation bytes is split into one-byte sequences.
* Start bytes for sequences longer than three bytes get misinterpreted
as start bytes for three-byte sequences. Continuation bytes beyond
byte three become one-byte sequences.
This means all characters outside the BMP are decoded incorrectly.
* One-byte sequences with the MSB are put into the JSON string
verbatim when char is unsigned, producing invalid UTF-8. When char
is signed, they're replaced by "\\uFFFF" instead.
This includes \xFE, \xFF, and stray continuation bytes.
* Overlong sequences are happily accepted, unless screwed up by the
bugs above.
* Likewise, sequences encoding surrogate code points or noncharacters.
* Unlike other control characters, ASCII DEL is not escaped. Except
in overlong encodings.
My rewrite fixes them as follows:
* Malformed UTF-8 sequences are replaced.
Except the overlong encoding \xC0\x80 of U+0000 is still accepted.
Permits embedding NUL characters in C strings. This trick is known
as "Modified UTF-8".
* Sequences encoding code points beyond Unicode range are replaced.
* Sequences encoding code points beyond the BMP produce a surrogate
pair.
* Sequences encoding surrogate code points are replaced.
* Sequences encoding noncharacters are replaced.
* ASCII DEL is now always escaped.
The replacement character is U+FFFD.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Test cases cover the two noncharacters in the BMP. Add tests for the
other 64 noncharacters.
Three existing test cases involve noncharacters U+FFFF and U+10FFFF.
Instead of deleting them as now duplicates, adjust them to use U+FFFC
and U+10FFFFD.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
# By Paolo Bonzini
# Via Paolo Bonzini
* bonzini/hw-dirs: (35 commits)
hw: move private headers to hw/ subdirectories.
MAINTAINERS: update for source code movement
hw: move last file to hw/arm/
hw: move hw/kvm/ to hw/i386/kvm
hw: move ARM CPU cores to hw/cpu/, configure with default-configs/
hw: move other devices to hw/misc/, configure with default-configs/
hw: move NVRAM interfaces to hw/nvram/, configure with default-configs/
hw: move GPIO interfaces to hw/gpio/, configure with default-configs/
hw: move interrupt controllers to hw/intc/, configure with default-configs/
hw: move DMA controllers to hw/dma/, configure with default-configs/
hw: move VFIO and ivshmem to hw/misc/
hw: move PCI bridges to hw/pci-* or hw/ARCH
hw: move SD/MMC devices to hw/sd/, configure with default-configs/
hw: move timer devices to hw/timer/, configure with default-configs/
hw: move ISA bridges and devices to hw/isa/, configure with default-configs/
hw: move char devices to hw/char/, configure via default-configs/
hw: move more files to hw/xen/
hw: move SCSI controllers to hw/scsi/, configure via default-configs/
hw: move SSI controllers to hw/ssi/, configure via default-configs/
hw: move I2C controllers to hw/i2c/, configure via default-configs/
...
Message-id: 1365442249-18259-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The gthread coroutine backend is broken and does not produce a working
QEMU; it is only useful for some very limited debugging situations.
Clean up the backend selection logic in configure so that it now runs
"if on windows use windows; else prefer ucontext; else sigaltstack".
To do this we refactor the configure code to separate out "test
whether we have a working ucontext", "pick a default if user didn't
specify" and "validate that user didn't specify something invalid",
rather than having all three of these run together. We also simplify
the Makefile logic so it just links in the backend the configure
script selects.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1365419487-19867-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch fixes some of the memory leaks in test-visitor-serialization but not all of them.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of just checking once in exactly this order if there are
dependendies, non-COW clusters and new allocation, this starts looping
around these. This way we can, for example, gather non-COW clusters after
new allocations as long as the host cluster offsets stay contiguous.
Once handle_dependencies() is extended so that COW areas of in-flight
allocations can be overwritten, this allows to continue with gathering
other clusters (we wouldn't be able to do that without this change
because we would have missed a possible second dependency in one of the
next clusters).
This means that in the typical sequential write case, we can combine the
COW overwrite of one cluster with the allocation of the next cluster as
soon as something like Delayed COW gets actually implemented. It is only
by avoiding splitting requests this way that Delayed COW actually starts
improving performance noticably.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The old code detected an overlapping allocation even when the
allocations didn't actually overlap, but were only adjacent.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This should be based on the virtual disk size, not on the size of the
image.
Interesting observation: With some VM state stored in the image file,
percentages higher than 100% are possible, even though snapshots
themselves are ignored. This is a qcow2 bug to be fixed another day: The
VM state should be discarded in the active L2 tables after completing
the snapshot creation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Check that writes to an image opened with BDRV_O_SNAPSHOT do not modify
the underlying image file.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix for rndrashift_short_acc to set correct value to higher 64 bits.
This change also corrects conditions when bit 23 of the DSPControl register
is set.
The existing test files have been extended with several examples that
trigger the issues. One bug/example in the test file for EXTR_RS_W has been
found and reported by Klaus Peichl.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
A comment explains that -nographic hangs test case 007. This is no
longer the case so add -nographic. This makes the test suite faster and
more pleasant to run since no windows pop up.
I am not sure exactly when -nographic starting working for this case but
there is no fundamental reason why graphics are needed here. Make sure
the serial port is not on stdio, it would conflict with the monitor.
Also remove unnecessary trailing whitespace on these lines.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
If zero clusters are erroneously treated as unallocated, "qemu-img rebase"
will copy the backing file's contents onto the cluster.
The bug existed also in image streaming, but since the root cause was in
qcow2's is_allocated implementation it is enough to test it with qemu-img.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that each AioContext has a ThreadPool and the main loop AioContext
can be fetched with bdrv_get_aio_context(), we can eliminate the concept
of a global thread pool from thread-pool.c.
The submit functions must take a ThreadPool* argument.
block/raw-posix.c and block/raw-win32.c use
aio_get_thread_pool(bdrv_get_aio_context(bs)) to fetch the main loop's
ThreadPool.
tests/test-thread-pool.c must be updated to reflect the new
thread_pool_submit() function prototypes.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
As of glib 2.35.4, glib changed its logic for ordering test cases:
https://bugzilla.gnome.org/show_bug.cgi?id=694487
This was causing failures in rtc-test. Group the reordered test
cases into their own suite, which maintains the original ordering.
CC: qemu-stable@nongnu.org
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The previous implementation incorrectly used same macro to detect overflow
for addition and subtraction. This patch makes distinction between these
two, and creates separate macros. The affected routines are changed
accordingly.
This change also includes additions to the existing tests for SUBQ_S_PH and
SUBQ_S_W that would trigger the fixed issue, and it removes dead code from
the test file. The last test case in subq_s_w.c is a bug found/reported/
isolated by Klaus Peichl from Dolby.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
# By Paolo Bonzini (7) and others
# Via Kevin Wolf
* kwolf/for-anthony: (22 commits)
pc: add compatibility machine types for 1.4
blockdev: enable discard by default
qemu-nbd: add --discard option
blockdev: add discard suboption to -drive
block: implement BDRV_O_UNMAP
block: complete all IOs before .bdrv_truncate
coroutine: trim down nesting level in perf_nesting test
coroutine: move pooling to common code
qemu-iotests: Test qcow2 image creation options
qemu-iotests: Add qemu-img compare test
qemu-img: Add compare subcommand
qemu-img: Add "Quiet mode" option
block: Add synchronous wrapper for bdrv_co_is_allocated_above
block: refuse negative iops and bps values
block: use Error in do_check_io_limits()
qcow2: support compressed clusters in BlockFragInfo
qemu-img: add compressed clusters to BlockFragInfo
qemu-img: fix missing space in qemu-img check output
qcow2: record fragmentation statistics during check
qcow2: introduce check_refcounts_l1/l2() flags
...
Correct sign-propagation before multiplication in MULQ_W helper.
The change also fixes previously incorrect expected values in the
tests for MULQ_RS.W and MULQ_S.W.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The change corrects sign-related issue with MULQ_S.PH. It also includes
extension to the already existing test which will trigger the issue.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
20000 nested coroutines require 20 GB of virtual address space.
Only nest 1000 of them so that the test (only enabled with
"-m perf" on the command line) runs on 32-bit machines too.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just create lots of images and try out each of the creation options that
qcow2 provides (except backing_file/fmt for now)
I'm not totally happy with the behaviour of qemu-img in each of the
cases, but let's be explicit and update the test when we do change
things later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Simple test for qemu-img compare to check it's working correctly.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Show how many clusters are compressed. This can be used to monitor how
many compressed clusters remain and whether to recompress the image.
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds the support for reporting the image end offset (in
bytes). This is particularly useful after a conversion (or a rebase)
where the destination is a block device in order to find the first
unused byte at the end of the image.
Signed-off-by: Federico Simoncelli <fsimonce@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test cases are scraped from Markus Kuhn's UTF-8 decoder capability and
stress test at
http://www.cl.cam.ac.uk/~mgk25/ucs/examples/UTF-8-test.txt
Unfortunately, both JSON parser and formatter misbehave right now.
This test expects current, incorrect results. They're all clearly
marked, and are to be replaced by correct ones as the bugs get fixed.
See comments in new utf8_string() for details.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
# By Alin Tomescu (1) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
.gitignore: Ignore optionrom/*.asm
ppc: fix bamboo >256MB RAM initialization in hw/ppc4xx_devs.c
Add some missing qtest binaries to .gitignore
xilinx_axienet.c: Assert no error when making link
Remove forward declaration of non-existant variable
These binaries are generated during make check on at least some
configurations, so att them to .gitignore.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Eliminate dependencies between one test and the others.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1357922817-17584-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce [qtest_]{read,write}[bwlq]() libqtest functions and
corresponding QTest protocol commands to replace local versions in
libi2c-omap.c.
Also convert m48t59-test's cmos_{read,write}_mmio() to {read,write}b().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1361051043-27944-4-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In order to convert qmp() macro to an inline function, expose a
qtest_qmpv() function, reused by qtest_qmp().
We can't apply GCC_FMT_ATTR() since fdc-test is using zero-length format
strings, which would result in warnings treated as errors.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1361051043-27944-3-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
libqtest.h provides a number of shortcut macros to avoid tests feeding
it the QTestState they operate on. Most of these can easily be turned
into static inline functions, so let's do that for clarity.
This avoids getting off-by-one error messages when passing wrong args.
Some macros had a val argument but documented @value argument. Fix this.
While touching things, enforce gtk-doc markup for return values and for
referencing types.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1361051043-27944-2-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The libqos driver for omap_i2c currently does not work on Big Endian.
Introduce helpers for reading from and writing to 16-bit armel registers.
This fixes tmp105-test failures on ppc.
To prepare for a QTest-level endianness solution, poison mem{read,write}
and always use the helpers. Adopt the expected signatures.
To avoid an unused variable warning, assert the STAT Single Byte Data
bit but, due to it not getting cleared, only it being set when len == 1.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Message-id: 1360600914-5448-3-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The [qtest_]in[bwl]() functions/macros don't have a value argument.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1360604139-16797-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's OK and expected for visitors to return errors when presented with
the fuzz test's random data. Since the fuzzer doesn't care about
errors, we pass in NULL rather than an Error**. This fixes a bug in
the fuzzer where it was passing the same Error** into each visitor,
with the effect that once one visitor returned an error, each later
visitor would notice that it had been passed in an Error** representing
an already set error, and do nothing.
For the case of visit_type_str() we also need to handle the case where
an error means that the visitor doesn't set our char*. We initialize
the pointer to NULL so we can safely g_free() it regardless of whether
the visitor allocated a string for us or not.
This fixes a problem where this test failed the MacOSX malloc()
consistency checks and might segfault on other platforms [due
to calling free() on an uninitialized pointer variable when
visit_type_str() failed.].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
There are lots of duplicate parsing code using strto*() in QEMU, and
most of that code is broken in one way or another. Even the visitors
code have duplicate integer parsing code[1]. This introduces functions
to help parsing unsigned int values: parse_uint() and parse_uint_full().
Parsing functions for signed ints and floats will be submitted later.
parse_uint_full() has all the checks made by opts_type_uint64() at
opts-visitor.c:
- Check for NULL (returns -EINVAL)
- Check for negative numbers (returns -EINVAL)
- Check for empty string (returns -EINVAL)
- Check for overflow or other errno values set by strtoll() (returns
-errno)
- Check for end of string (reject invalid characters after number)
(returns -EINVAL)
parse_uint() does everything above except checking for the end of the
string, so callers can continue parsing the remainder of string after
the number.
Unit tests included.
[1] string-input-visitor.c:parse_int() could use the same parsing code
used by opts-visitor.c:opts_type_int(), instead of duplicating that
logic.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We've seen this repeatedly in buildbot but I can now reliably
reproduce it myself too. With a few hundred runs of 'make check',
qemu-system-sparc will hang consuming 100% CPU. I've attached GDB
to the hung process and unfortunately, I can't get anything useful
out of GDB (RIP is not a valid simple and there is nothing else on
the stack).
At any rate, since this only manifests in qemu-system-sparc and it
doesn't appear to be a qtest specific problem, I think we should
disable it until the problem is resolved.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Kevin Wolf (7) and others
# Via Stefan Hajnoczi
* stefanha/block:
block/raw-posix: Build fix for O_ASYNC
vmdk: Allow space in file name
parallels: Fix bdrv_open() error handling
dmg: Use g_free instead of free
dmg: Fix bdrv_open() error handling
vpc: Fix bdrv_open() error handling
cloop: Fix bdrv_open() error handling
bochs: Fix bdrv_open() error handling
sheepdog: pass vdi_id to sheep daemon for sd_close()
vmdk: Allow selecting SCSI adapter in image creation
block: Adds mirroring tests for resized images
block: Fix is_allocated_above with resized files
qemu-iotests: Add regression test for b7ab0fea
When running "make check" with gcov enabled, we get the following
message:
hw/tmp105.gcda:cannot open data file, assuming not executed
The problem happens because:
* tmp105-test exits before QEMU exits, because waitpid() at
qtest_quit() fails;
* waitpid() fails because there's another process already
waiting for the QEMU process;
* The process that is already waiting for QEMU is the child created by
qtest_init() to run system();
* qtest_quit() is incorrectly waiting for the QEMU PID directly instead
of the child created by qtest_init().
This fixes the problem by sending SIGTERM to QEMU, but waiting for the
child process created by qtest_init() (that exits immediately after QEMU
exits).
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This test verifies two mirroring issues are fixed with resized images:
* sync='top' creates an image that is the proper size
* sync='full' doesn't cause an assertion failure and crash qemu
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It turned out that the change in b7ab0fea was actually a real qcow2
corruption fix. This is a reproducer for the bug.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The pos field in the DSPControl register is not correctly initialized.
Per documentation, the result of MTHLIP is unpredictable if the value of the
pos field before the execution is greater than 32.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Struct tm does not have tm_gmtoff field on illumos.
Fix the build by not zero-initializing these fields on Solaris.
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* afaerber/qom-cpu: (37 commits)
kvm: Pass CPUState to kvm_on_sigbus_vcpu()
cpu: Unconditionalize CPUState fields
target-m68k: Use type_register() instead of type_register_static()
target-unicore32: Use type_register() instead of type_register_static()
target-openrisc: Use type_register() instead of type_register_static()
target-unicore32: Catch attempt to instantiate abstract type in cpu_init()
target-openrisc: Catch attempt to instantiate abstract type in cpu_init()
target-m68k: Catch attempt to instantiate abstract type in cpu_init()
target-arm: Catch attempt to instantiate abstract type in cpu_init()
target-alpha: Catch attempt to instantiate abstract type in cpu_init()
qom: Introduce object_class_is_abstract()
target-unicore32: Detect attempt to instantiate non-CPU type in cpu_init()
target-openrisc: Detect attempt to instantiate non-CPU type in cpu_init()
target-m68k: Detect attempt to instantiate non-CPU type in cpu_init()
target-alpha: Detect attempt to instantiate non-CPU type in cpu_init()
target-arm: Detect attempt to instantiate non-CPU type in cpu_init()
cpu: Add model resolution support to CPUClass
target-i386: Remove setting tsc-frequency from x86_def_t
target-i386: Set custom features/properties without intermediate x86_def_t
target-i386: Remove vendor_override field from CPUX86State
...
Conflicts:
tests/Makefile
Resolved simple conflict caused by lack of context in Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Paolo Bonzini (14) and others
# Via Kevin Wolf
* kwolf/for-anthony: (24 commits)
ide: Add fall through annotations
block: Create proper size file for disk mirror
ahci: Add migration support
ahci: Change data types in preparation for migration
ahci: Remove unused AHCIDevice fields
hbitmap: add assertion on hbitmap_iter_init
mirror: do nothing on zero-sized disk
block/vdi: Check for bad signature
block/vdi: Improved return values from vdi_open
block/vdi: Improve debug output for signature
block: Use error code EMEDIUMTYPE for wrong format in some block drivers
block: Add special error code for wrong format
mirror: support arbitrarily-sized iterations
mirror: support more than one in-flight AIO operation
mirror: add buf-size argument to drive-mirror
mirror: switch mirror_iteration to AIO
mirror: allow customizing the granularity
block: allow customizing the granularity of the dirty bitmap
block: return count of dirty sectors, not chunks
mirror: perform COW if the cluster size is bigger than the granularity
...
This introduces utility functions for the APIC ID calculation, based on:
Intel® 64 Architecture Processor Topology Enumeration
http://software.intel.com/en-us/articles/intel-64-architecture-processor-topology-enumeration/
The code should be compatible with AMD's "Extended Method" described at:
AMD CPUID Specification (Publication #25481)
Section 3: Multiple Core Calcuation
as long as:
- nr_threads is set to 1;
- OFFSET_IDX is assumed to be 0;
- CPUID Fn8000_0008_ECX[ApicIdCoreIdSize[3:0]] is set to
apicid_core_width().
Unit tests included.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since x86_64 is a superset of i386 and reuses all its test cases, adopt
all the i386 gcov source files as well, substituting their paths
appropriately.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
m48t59-test is individually being executed for sparc and sparc64, so add
the gcov source file for sparc64 as well.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit 6e9989034b introduced a new qtest
test case but misspelled gcov, leading to no coverage analysis. Fix it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Perform input tests on random data.
Improvement to code coverage for qapi/string-input-visitor.c
is about 3 percentage points.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
I had missed the introduction of the gcov-files-* variables.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
hbitmap_iter_init causes an out-of-bounds access when the "first"
argument is or greater than or equal to the size of the bitmap.
Forbid this with an assertion, and remove the failing testcase.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This makes sense when the next commit starts using the extra buffer space
to perform many I/O operations asynchronously.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When mirroring runs, the backing files for the target may not yet be
ready. However, this means that a copy-on-write operation on the target
would fill the missing sectors with zeros. Copy-on-write only happens
if the granularity of the dirty bitmap is smaller than the cluster size
(and only for clusters that are allocated in the source after the job
has started copying). So far, the granularity was fixed to 1MB; to avoid
the problem we detected the situation and required the backing files to
be available in that case only.
However, we want to lower the granularity for efficiency, so we need
a better solution. The solution is to always copy a whole cluster the
first time it is touched. The code keeps a bitmap of clusters that
have already been allocated by the mirroring job, and only does "manual"
copy-on-write if the chunk being copied is zero in the bitmap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
HBitmaps provides an array of bits. The bits are stored as usual in an
array of unsigned longs, but HBitmap is also optimized to provide fast
iteration over set bits; going from one bit to the next is O(logB n)
worst case, with B = sizeof(long) * CHAR_BIT: the result is low enough
that the number of levels is in fact fixed.
In order to do this, it stacks multiple bitmaps with progressively coarser
granularity; in all levels except the last, bit N is set iff the N-th
unsigned long is nonzero in the immediately next level. When iteration
completes on the last level it can examine the 2nd-last level to quickly
skip entire words, and even do so recursively to skip blocks of 64 words or
powers thereof (32 on 32-bit machines).
Given an index in the bitmap, it can be split in group of bits like
this (for the 64-bit case):
bits 0-57 => word in the last bitmap | bits 58-63 => bit in the word
bits 0-51 => word in the 2nd-last bitmap | bits 52-57 => bit in the word
bits 0-45 => word in the 3rd-last bitmap | bits 46-51 => bit in the word
So it is easy to move up simply by shifting the index right by
log2(BITS_PER_LONG) bits. To move down, you shift the index left
similarly, and add the word index within the group. Iteration uses
ffs (find first set bit) to find the next word to examine; this
operation can be done in constant time in most current architectures.
Setting or clearing a range of m bits on all levels, the work to perform
is O(m + m/W + m/W^2 + ...), which is O(m) like on a regular bitmap.
When iterating on a bitmap, each bit (on any level) is only visited
once. Hence, The total cost of visiting a bitmap with m bits in it is
the number of bits that are set in all bitmaps. Unless the bitmap is
extremely sparse, this is also O(m + m/W + m/W^2 + ...), so the amortized
cost of advancing from one bit to the next is usually constant.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
aio_poll() must return true if any work is still pending, even if it
didn't make progress, so that bdrv_drain_all() doesn't stop waiting too
early. The possibility of stopping early occasionally lead to a failed
assertion in bdrv_drain_all(), when some in-flight request was missed
and the function didn't really drain all requests.
In order to make that change, the return value as specified in the
function comment must change for blocking = false; fortunately, the
return value of blocking = false callers is only used in test cases, so
this change shouldn't cause any trouble.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Exercise all four commands of the TMP105, testing for an issue in the
I2C TX path.
The test case uses the N800's OMAP I2C and is the first for ARM.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds a simple I2C API and a driver implementation for omap_i2c.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is no reason why for example qemu-ga should include all the
definitions for the QEMU monitor. However, there are a few
that are needed (qapi_free_SocketAddress, qapi_free_InetSocketAddress,
ErrorClass_lookup). These should be moved to a separate "core"
.json schema that goes into libqemuutil.a.
For now, make this clearer by moving the qapi-*.o definitions out
of libqemuutil.a. Once the above refactoring is done, qga-obj-y
should not include anymore qapi-types.o and qapi-visit.o.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split them between libqemuutil.a and, for those used by qemu-img/io/nbd,
block-obj-y.
Static libraries ensure that binaries such as qemu-ga do not include
unused modules.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Helper function for dpa_w_ph, dpax_w_ph, dps_w_ph and dpsx_w_ph incorrectly
defines halfword vector elements as unsigned values. This results in wrong
output which is not triggered in the tests as they also follow this logic.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Reviewed-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add support for compiling for GCOV test coverage, enabled
with '--enable-gcov' during configure.
Test coverage will be reported after each test.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The change removes some unnecessary and incorrect code for EXTR_S.H.
Further, it corrects the mask for shift value in the EXTR_ instructions. It also
extends the existing tests so they trigger the issues corrected with the change.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Upper 4 bits of ccond (bits 31..28 ) of DSPControl register are not used in
the MIPS32 architecture. They are used in the MIPS64 architecture. For MIPS32
these bits must be written as zero, and return zero on read.
The change fixes writes (WRDSP) and reads (RDDSP) to the register. It also fixes
the tests that use these instructions, and makes them smaller and simpler.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This adds some first tests for qcow2's dependency handling when two
parallel write requests access the same cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We need to eliminate calls to qemu_aio_flush() since the function is
being removed. Most callers will use bdrv_drain_all() instead but
test-thread-pool.c is lower level.
Since the test uses the global AioContext we can loop on qemu_aio_wait()
to wait for aio and bh activity to complete.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There has been confusion between various aio wait and flush functions.
It's time to get rid of qemu_aio_flush() but in the aio test cases we
really do want this low-level functionality.
Therefore declare a local wait_for_aio() helper for the test cases.
Drop the aio_flush() test case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These spelling bugs were found by codespell:
supressing -> suppressing
transfered -> transferred
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
helper_shilo has not been shifting an accumulator value correctly for negative
values in 'shift' field. Minor optimization for shift=0 case.
This change also adds tests that will trigger issue and check for regressions.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Content of register rs should be shifted for pos before applying a mask.
This change contains both fix for the instruction and to the existing test.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Reviewed-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This bug occurs when the SET flag of Register B is enabled. When an RTC
data register (i.e. any of the ten time/calender CMOS bytes) is set, the
data is (as expected) correctly stored in the cmos_data array. However,
since the SET flag is enabled, the function rtc_set_time is not invoked.
As a result, the field base_rtc in RTCState remains uninitialized. This
causes a problem on subsequent writes which can end up overwriting data.
To see this, consider writing data to Register A after having written
data to any of the RTC data registers; the following figure illustrates
the call stack for the Register A write operation:
+- cmos_io_port_write
+-- check_update_timer
+---- get_next_alarm
+------ rtc_update_time
In rtc_update_time, get_guest_rtc calculates the wrong time and
overwrites the previously written RTC data register values.
Signed-off-by: Alex Horn <alex.horn@cs.ox.ac.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The cancellation test is failing on the buildbots. While the failure
merits a little more investigation to understand what is going on,
the logs show that the failure is not impacting the coverage
provided by the test. Hence, loosen a bit the assertions in a
way that should let the test proceed and hopefully pass.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/build-urgent:
Makefile: Add missing dependency (fix parallel builds)
tests: link in stubs
libcacard: link in stubs
libcacard: make unnesting rules available to Makefile.objs
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
ST0 shouldn't include 0x20 (FD_SR0_SEEK) after READ ID.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Do not always set FD_SR0_SEEK, as callers already set it if needed.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To do this, we start a qemu-nbd process at _make_test_img and kill
it in _cleanup_test_img. $TEST_IMG is changed to point at the TCP
server. We also remove the checks for existence of binaries from
common.config - they're duplicated in common, and we can make the
qemu-nbd check conditional on $IMGPROTO being "nbd" if we do it there.
Signed-off-by: Nick Thomas <nick@bytemark.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Actually writing all the content with 512 byte sector size would take
forever, therefore build the image file with a Python script and use
qemu-io for the last write that actually triggers the refcount table
growth.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is setting the stage for a cleanup of FPREM and FPREM1 helpers while being
sure that they behave same as bare metal.
The test constructs operands using combinations of corner cases for the
floating-point bitfields and prints operands, result and FPU status word for
FPREM and FPREM1. The outputs can then be compared between bare metal and QEMU.
The 'run-test-i386-fprem' make target does just that.
Signed-off-by: Catalin Patulea <catalinp@google.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
With i386-linux-user target on x86_64 host, this does not introduce any new test
failures.
Signed-off-by: Catalin Patulea <catalinp@google.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* kwolf/for-anthony: (32 commits)
osdep: Less restrictive F_SEFL in qemu_dup_flags()
qemu-iotests: add testcases for mirroring on-source-error/on-target-error
qmp: add pull_event function
mirror: add support for on-source-error/on-target-error
iostatus: forward block_job_iostatus_reset to block job
qemu-iotests: add mirroring test case
mirror: implement completion
qmp: add drive-mirror command
mirror: introduce mirror job
block: introduce BLOCK_JOB_READY event
block: add block-job-complete
block: rename block_job_complete to block_job_completed
block: export dirty bitmap information in query-block
block: introduce new dirty bitmap functionality
block: add bdrv_open_backing_file
block: add bdrv_query_stats
block: add bdrv_query_info
qemu-config: Add new -add-fd command line option
monitor: Prevent removing fd from set during init
monitor: Enable adding an inherited fd to an fd set
...
Conflicts:
vl.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The new options are tested with blkdebug on both the source and the
target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new test verifies that qemu-img info --backing-chain safely aborts
when an image file has a backing file infinite loop.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The previous block commit used absolute filenames for all block-commit
images and commands; this adds relative filenames for the same tests.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This simplifies some code and error checking, and also fixes a bug.
bdrv_find_backing_image() should only be passed absolute filenames,
or filenames relative to the chain. In the QMP message handler for
block commit, when looking up the base do so from the determined top
image, so we know it is reachable from top.
Some of the error messages put out by block-commit have changed
slightly, which causes 2 tests cases for block-commit to fail.
This patch updates the test cases to look for the correct error
output.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This broke when the tests were moved from tests/ to tests/tcg/.
On x86_64 host/i386-linux-user non-kvm guest, test-i386 and test-mmap are broken, but at least they build.
To build/run the tests:
$ cd $BUILD_PATH/tests/tcg
$ SRC_PATH=path/to/qemu make <target>
Signed-off-by: Catalin Patulea <catalinp@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement the century byte in the RTC emulation, and test that it works.
This leads to some annoying compatibility code because we need to treat
a value of 2000 for the base_year property as "use the century byte
properly" (which would be a value of 0).
The century byte will now be always-zero, rather than always-20,
for the MIPS Magnum machine whose base_year is 1980. Commit 42fc73a
(Support epoch of 1980 in RTC emulation for MIPS Magnum, 2009-01-24)
correctly said:
With an epoch of 1980 and a year of 2009, one could argue that [the
century byte] should hold either 0, 1, 19 or 20. NT 3.50 on MIPS
does not read the century byte.
so I picked the simplest and most sensible implementation which is to
return 0 for 1980-2079, 1 for 2080-2179 and so on.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When setting a date in 1980, Linux is actually disregarding the century
byte and setting the year to 2080. This causes a year-2038 overflow
in mktimegm. Fix this by doing the days-to-seconds computation in
64-bit math.
Reported-by: Lucas Meneghel Rodrigues <lookkas@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is quite difficult to debug qtest test cases without extra wrapper
scripts for QEMU or similar. This patch adds a simple environment
variable-based trigger that sends a STOP signal to the QEMU instance
under test, before attempting to connect to its QMP session.
This will block execution of the testcase and give time to attach a
debugger to the stopped QEMU process.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a test for each of report/ignore/stop. The tests use blkdebug
to generate an error in the middle of a script. The error is
recoverable (once = "on") so that we can test resuming a job after
stopping for an error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iotests.py provides a convenience function that uses Python keyword
arguments to represent QMP command arguments. However, almost all
QMP commands use dashes for argument names (the sole exception is
block_set_io_throttle), and dashes are not allowed in a keyword
argument name. Hence provide automatic conversion of underscores
to dashes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These check that a paused streaming job does not advance its offset.
Sometimes the new test fails; the map is different between the source
and the destination of the streaming because qemu-io does not always
pack adjacent clusters that have the same allocated/unallocated state.
However, this also happens with the existing test_stream testcase, and
is better fixed in qemu-io.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Derived from the streaming test cases (030), this adds the
following 9 tests:
1. For the following image chain, commit [mid] into [backing],
and use qemu-io to verify [backing] has its original data, as
well as the data from [mid]
[backing] <-- [mid] <-- [test]
2. Verifies that 'block-commit' with the 'speed' parameter sets the
speed parameter, as reported by 'query-block-jobs'
3. Verifies that a bogus 'device' parameter to 'block-commit'
results in error
4-9: Appropriate error values returned for the following argument errors:
* top == base
* top is nonexistent
* base is nonexistent
* top == active layer (this is currently not supported)
* top and base arguments are reversed
* top argument is omitted
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new test case checks that streaming completes successfully when the
backing file is smaller than the image file.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When qemu_open is passed a filename of the "/dev/fdset/nnn"
format (where nnn is the fdset ID), an fd with matching access
mode flags will be searched for within the specified monitor
fd set. If the fd is found, a dup of the fd will be returned
from qemu_open.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the qemu-io --nocache option is used the 039 test case cannot abort
QEMU at a point where the image is dirty. Skip the test case.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image formats with a dirty bit, like qed and qcow2, repair dirty image
files upon open with BDRV_O_RDWR. Performing automatic repair when
qemu-img check runs is not ideal because the bdrv_open() call repairs
the image before the actual bdrv_check() call from qemu-img.c.
Fix this "double repair" since it leads to confusing output from
qemu-img check. Tell the block driver that this image is being opened
just for bdrv_check(). This skips automatic repair and qemu-img.c can
invoke it manually with bdrv_check().
Update the golden output for qemu-iotests 039 to reflect the new
qemu-img check output.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of building a huge pipeline, just pass all expressions to a
single sed process.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests already filters out image creation options that may be
present or not in order to get the same output in both cases. However,
often it only considers the default value of the option. Cover all valid
values instead so that ./check -o name=value can be used successfull for
all of them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests establishes the basic post-conditions of the qcow2 lazy
refcounts features:
1. If the image was closed normally, it is marked clean.
2. If an allocating write was performed and the image was not closed
normally, then it is marked dirty.
a. Written data can be read back successfully.
b. The image file can be repaired and will be marked clean again.
c. The image file is automatically repaired when opened read/write.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Lazy refcounts is a performance optimization for qcow2 that postpones
refcount metadata updates and instead marks the image dirty. In the
case of crash or power failure the image will be left in a dirty state
and repaired next time it is opened.
Reducing metadata I/O is important for cache=writethrough and
cache=directsync because these modes guarantee that data is on disk
after each write (hence we cannot take advantage of caching updates in
RAM). Refcount metadata is not needed for guest->file block address
translation and therefore does not need to be on-disk at the time of
write completion - this is the motivation behind the lazy refcount
optimization.
The lazy refcount optimization must be enabled at image creation time:
qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=on a.qcow2 10G
qemu-system-x86_64 -drive if=virtio,file=a.qcow2,cache=writethrough
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Hide the default lazy_refcounts=off output from qemu-img like we do with
other image creation options. This ensures that existing golden outputs
continue to pass despite the new option that has been added.
Note that this patch applies before the one that actually introduces the
lazy_refcounts=on|off option. This ensures git-bisect(1) continues to
work.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds an incompatible feature bit to mark images that have not
been closed cleanly. When a dirty image file is opened a consistency
check and repair is performed.
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qed.py utility can inspect and manipulate QED image files. It can
be used for testing to see the state of image metadata and also to
inject corruptions into the image file. It also has a scrubbing feature
to copy just the metadata out of an image file, allowing users to share
broken image files without revealing data in bug reports.
This has lived in my local repo for a long time but could be useful
to others.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Otherwise 'make check' won't recompile files that need to be recompiled
because of header changes.
To reproduce the bug, run:
$ make check # succeeds
$ echo B0RKED > hw/mc146818rtc_regs.h
$ make check # is supposed to try to rebuild tests/rtc-test.o and fail
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't overwrite / leak previously set errors.
Make traversal cope with missing mandatory sub-structs.
Don't try to end a container that could not be started.
v1->v2:
- unchanged
v2->v3:
- instead of examining, assert that we never overwrite errors with
error_set()
- allow visitors to set a NULL struct pointer successfully, so traversal
of incomplete objects can continue
- check for a NULL "obj" before accessing "(*obj)->has_XXX" (this is not a
typo, "obj != NULL" implies "*obj != NULL" here)
- fix start_struct / end_struct balance for unions as well
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
check -valgrind wraps all qemu-io calls with valgrind. This makes it a
bit easier to debug problems that occur somewhere deep in a test case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
* mjt/mjt-iov2:
rewrite iov_send_recv() and move it to iov.c
cleanup qemu_co_sendv(), qemu_co_recvv() and friends
export iov_send_recv() and use it in iov_send() and iov_recv()
rename qemu_sendv to iov_send, change proto and move declarations to iov.h
change qemu_iovec_to_buf() to match other to,from_buf functions
consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent
allow qemu_iovec_from_buffer() to specify offset from which to start copying
consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset()
rewrite iov_* functions
change iov_* function prototypes to be more appropriate
virtio-serial-bus: use correct lengths in control_out() message
Conflicts:
tests/Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Each test litters /tmp with several files: a pid file and two
sockets. Tidy up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Calling sense interrupt status while there is no interrupt should
return invalid command (0x80).
Read command should always returns in st0 seek_end bit set to 1.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After rewrite DSKCHG bit handling the test has to be updated. Now
is needed to seek to different track to clear DSKCHG bit.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
From Markus:
Makes "make check" hang:
QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 gtester -k --verbose -m=quick tests/crash-test tests/rtc-test
TEST: tests/crash-test... (pid=972)
qemu-system-x86_64: Device needs media, but drive is empty
[Nothing happens, wait a while, then hit ^C]
make: *** [check-qtest-x86_64] Interrupt
This was due to the fact that we weren't checked for errors when
reading from the QMP socket. This patch adds appropriate error
checking.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
accept() expects address_len to point to the length of the sockaddr on
input. Initialize it accordingly.
Resolves an assertion due to EFAULT on illumos.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This new test validates the autoclear feature bit behavior. When QEMU
opens a qcow2v3 image file with an unknown autoclear feature bit the bit
should be cleared in the image file header.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new command sets feature bits in the image file header:
qcow2.py set-feature-bit incompatible|compatible|autoclear <bit>
The bit number must be in the range [0, 64).
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If you try to read from a floppy drive without a media, you should get
an abnormal termination error.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This one is a bit more interesting. The COW operation isn't performed
completely synchronously, and therefore dependencies must be handled
correctly when multiple requests write to the same unallocated cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Looks like we're still missing these very basic tests for backing file
handling.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This way, they will not execute any VM code at all. However, right now
the cancellation test is "relying" on being slowed down by TCG executing
BIOS code. So, change the timeouts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The TestStreamStop test case is racy; if the job completes before we can
cancel it, it fails. If we remove the sleep the job will be canceled
before it has even started, and the test succeeds but it is also not
testing anything interesting.
But if the image is left sparse, then the job has really nothing to do.
For qcow2 it will read one L2-table, for raw it will issue a bunch of
ioctls. This also falls under "not testing anything interesting", and
this may be happening right now (depending on the filesystem) since the
file protocol got an is_allocated method.
Filling the test image with data ensures that the test covers the
intended case. It also slows down the test, which will be particularly
important after the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make it much more understandable, add a missing
iov_cnt argument (number of iovs in the iov), and
add comments to it.
The new implementation has been extensively tested
by splitting a large buffer into many small
randomly-sized chunks, sending it over socket to
another, slow process and verifying the receiving
data is the same.
Also add a unit test for iov_send_recv(), sending/
receiving data between two processes over a socketpair
using random vectors and random sizes.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* afaerber-or/qom-next-1:
target-i386: Use uint32 visitor for [x]level properties
qdev: Remove PropertyInfo range checking
qdev: Switch property accessors to fixed-width visitor interfaces
qdev: Use int32_t container for devfn property
qapi: Add String visitor coverage to serialization unit tests
qapi: String visitor, use %f representation for floats
qapi: Unit tests for visitor-based serialization
qapi: Add Visitor interfaces for uint*_t and int*_t
Currently string-output-visitor formats floats as %g, which is nice in
that trailing 0's are automatically truncated, but otherwise this causes
some issues:
- it uses 6 significant figures instead of 6 decimal places, which
means something like 155777.5 (which even has an exact floating point
representation) will be rounded to 155778 when converted to a string.
- output will be presented in scientific notation when the normalized
form requires a 10^x multiplier. Not a huge deal, but arguably less
readable for command-line arguments.
- due to using scientific notation for numbers requiring more than 6
significant figures, instead of hard-defined decimal places, it
fails a lot of the test-visitor-serialization unit tests for floats.
Instead, let's just use %f, which is what the QJSON and the QMP visitors
use.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Currently we test our visitors individually, and seperately for input
vs. output. This is useful for validating internal representations
against the native C types and vice-versa, and other visitor-specific
testing, but it doesn't cover the potential use-case of using visitor
pairs for serialization/deserialization very well, and makes it
hard to easily extend the coverage for different C types / boundary
conditions.
To cover that we add a set of unit tests that takes a number of native C
values, passes them into an output visitor, extracts the values with an
input visitor, then compares the result to the original.
Plugging in new visitors to the test harness only requires a user to
implement the SerializeOps interface and add it to a list.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This changes implementations of all iov_*
functions, completing the previous step.
All iov_* functions now ensure that this offset
argument is within the iovec (using assertion),
but lets to specify `bytes' value larger than
actual length of the iovec - in this case they
stops at the actual end of iovec. It is also
suggested to use convinient `-1' value as `bytes'
to mean just this -- "up to the end".
There's one very minor semantic change here: new
requiriment is that `offset' points to inside of
iovec. This is checked just at the end of functions
(assert()), it does not actually need to be enforced,
but using any of these functions with offset pointing
past the end of iovec is wrong anyway.
Note: the new code in iov.c uses arithmetic with
void pointers. I thought this is not supported
everywhere and is a GCC extension (indeed, the C
standard does not define void arithmetic). However,
the original code already use void arith in
iov_from_buf() function:
(memcpy(..., buf + buf_off,...)
which apparently works well so far (it is this
way in qemu 1.0). So I left it this way and used
it in other places.
While at it, add a unit-test file test-iov.c,
to check various corner cases with iov_from_buf(),
iov_to_buf() and iov_memset().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Keeping GENERATED_HEADERS dependencies up-to-date everywhere is complex.
We can simply make the Makefile depend on them, and they will be built
before all other targets.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As default a guest has always one floppy drive so 0x10 byte in CMOS
has to have 0x40 value. Higher 4 bits means that the first floppy drive
is 1.44 Mb 3"5 drive and lower 4 bits means the second drive is not present.
After the guest starts DSKCHG bit in DIR register should be set. If there
is no media in drive, this bit should be set all the time.
Because we start the guest without media in drive, we have to swap
'eject' and 'change' in 'test_media_change'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 035 parallel aio write test relies on knowledge of qcow2 metadata
layout to stress parallel L2 table accesses. This only works for qcow2
unless we add additional calculations for qed or other formats.
Mark this test as qcow2-only.
Note that the test is strictly speaking non-deterministic although the
output produced is reliable with qcow2. This is because the aio_write
command returns before the aio write request has completed. Completions
can occur at any time afterwards and cause a message to be printed.
Therefore the exact output of this test is not deterministic but we seem
to get away with it for qcow2 (maybe due to coroutine and main loop
scheduling).
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 93e9eb6808 added fdc-test,
but accidentally removed rtc-test because check-qtest-i386-y was
not enhanced but set twice.
This patch adds rtc-test again (and sorts both tests alphabetically).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When QEMU was built with the simple trace backend, linking failed:
LINK tests/fdc-test
oslib-posix.o: In function `trace_qemu_memalign':
qemu/bin/debug/x86/./trace.h:31: undefined reference to `trace3'
oslib-posix.o: In function `trace_qemu_vmalloc':
qemu/bin/debug/x86/./trace.h:35: undefined reference to `trace2'
oslib-posix.o: In function `trace_qemu_vfree':
qemu/bin/debug/x86/./trace.h:39: undefined reference to `trace1'
collect2: error: ld returned 1 exit status
make: *** [tests/fdc-test] Fehler 1
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* sweil/for-1.1:
qemu-doc: Use QEMU instead of qemu for product name
qemu-doc: Fix executable name in examples
qemu-doc: Add missing parameter in description of -D option
configure: Use QEMU instead of Qemu
fix some common typos
qemu-timer: Fix wrong error message
These were identified using: http://github.com/lyda/misspell-check
and run like this to create a bourne shell script using GNU sed's
-i option:
git ls-files|grep -vF .bin | misspellings -f - |grep -v '^ERROR:' |perl \
-pe 's/^(.*?)\[(\d+)\]: (\w+) -> "(.*?)"$/sed -i '\''${2}s!$3!$4!'\'' $1/'
Manually eliding the FP, "rela->real" and resolving "addres" to
address (not "adders") we get this:
sed -i '450s!thru!through!' Changelog
sed -i '260s!neccessary!necessary!' coroutine-sigaltstack.c
sed -i '54s!miniscule!minuscule!' disas.c
sed -i '1094s!thru!through!' hw/usb/hcd-ehci.c
sed -i '1095s!thru!through!' hw/usb/hcd-ehci.c
sed -i '21s!unecessary!unnecessary!' qapi-schema-guest.json
sed -i '307s!explictly!explicitly!' qemu-ga.c
sed -i '490s!preceeding!preceding!' qga/commands-posix.c
sed -i '792s!addres!address!' qga/commands-posix.c
sed -i '6s!beeing!being!' tests/tcg/test-mmap.c
Also, manually fix "arithmentic", spotted by Peter Maydell:
sed -i 's!arithmentic!arithmetic!' coroutine-sigaltstack.c
Signed-off-by: Jim Meyering <meyering@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Unallocated sectors should really never be accessed by the guest,
so there's no need to copy them during the streaming process.
If they are read by the guest during streaming, guest-initiated
copy-on-read will copy them (we're in the base == NULL case, which
enables copy on read). If they are read after we disconnect the
image from the base, they will read as zeroes anyway.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The test on sectors not allocated can fail if the L1/L2 tables are
not on disk yet. Allow tests to shutdown the VM early.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-io's cvtstr function sometimes will incorrectly omit the
decimal part of the number, and sometimes will incorrectly include
it. This patch fixes both. The former is more serious, and can
be seen in the patches to 027.out and 033.out.
The changes to all other files were scripted with sed, so there were
no "surprises" beyond 027.out and 033.out.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A trailing space is left when qemu-img has no arguments, for example if
-nocache is not used. This becomes an empty argument after split()
and causes qemu-io to fail.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test case manages to let qcow2 abort because its cache is used up
and it can't find free cache entries for new requests any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We added image fragmentation statistics functions to qemu-img several days
ago, those patches will cause "./check -qed" failed. This patch will ignore
fragmentation statistics information of qed format, and then "./check -qed"
will work.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add tests to exercise the InvalidParameter 'speed' error code path, as
well as the regular success case for setting the speed. The
block-stream 'speed' parameter allows the speed limit of the job to be
applied immediately when the job starts instead of issuing a separate
block-job-set-speed command later. If the parameter has an invalid
value we expect to get an error and the job is not created.
It turns out that cancelling a block job is a common operation in these
test cases, let's extract a cancel_and_wait() function instead of
duplicating the QMP commands.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
After adding GCC_FMT_ATTR to qtest_sendf, more format errors are reported
by the compiler. These are fixed here.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use PRIx64 to print 64 bit values to avoid truncation
on 32 bit hosts.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* kwolf/for-anthony: (38 commits)
qemu-iotests: Fix test 031 for qcow2 v3 support
qemu-iotests: Add -o and make v3 the default for qcow2
qcow2: Zero write support
qemu-iotests: Test backing file COW with zero clusters
qemu-iotests: add a simple test for write_zeroes
qcow2: Support for feature table header extension
qcow2: Support reading zero clusters
qcow2: Version 3 images
qcow2: Ignore reserved bits in check_refcounts
qcow2: Ignore reserved bits in refcount table entries
qcow2: Simplify count_cow_clusters
qcow2: Refactor qcow2_free_any_clusters
qcow2: Ignore reserved bits in L1/L2 entries
qcow2: Fail write_compressed when overwriting data
qcow2: Ignore reserved bits in count_contiguous_clusters()
qcow2: Ignore reserved bits in get_cluster_offset
qcow2: Save disk size in snapshot header
Specification for qcow2 version 3
qcow2: Fix refcount block allocation during qcow2_alloc_cluster_at()
iotests: Resolve test failures caused by hostname
...
* origin/master: (27 commits)
target-arm: Move reset handling to arm_cpu_reset
target-arm: Drop cpu_reset_model_id()
target-arm: Move cache ID register setup to cpu specific init fns
target-arm: Move OMAP cp15_i_{max,min} reset to cpu_state_reset
target-arm: Move feature register setup to per-CPU init fns
target-arm: Move iWMMXT wCID reset to cpu_state_reset
target-arm: Drop JTAG_ID documentation
target-arm: Move SCTLR reset value setup to per cpu init fns
target-arm: Move CTR setup to per cpu init fns
target-arm: Move MVFR* setup to per cpu init fns
target-arm: Move FPSID config to cpu init fns
target-arm: Move feature bit settings to CPU init fns
target-arm: Add QOM subclasses for each ARM cpu implementation
target-arm: remind to keep arm features in sync with linux-user/elfload.c
tci: GETPC() macro must return an uintptr_t
gdbstub: Synchronize CPU state unconditionally in gdb_set_cpu_pc
softfloat: make USE_SOFTFLOAT_STRUCT_TYPES compile
target-xtensa: add tests for LOOPNEZ and LOOPGTZ
target-xtensa: fix LOOPNEZ/LOOPGTZ translation
qtest: add m48t59 tests for Sparc
...
The block streaming and job commands used '_' instead of '-' for reasons
of compatibility with libvirt, which already included support for the
'_' naming. However, the semantics of block_job_cancel have changed and
libvirt now needs to handle the new semantics.
Since the old semantics were never in a QEMU release we can still rename
the commands to use '-' instead of '_'. Libvirt is also happy because
the new name can be used to distinguish QEMU binaries that support the
latest block-job-cancel semantics from those that include a downstream
block_job_cancel command.
Therefore, let's apply the QAPI/QMP naming rules to the block streaming
and job commands. QEMU 1.1 will be the first release with these
commands so no upstream users can break.
Note that HMP commands are left with '_' because that is the convention
there.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add simple m48t59 qtests, enable test only for Sparc32
and Sparc64. On PPC, the device is behind PCI bus.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qcow2.py must be updated to work with version 3 images at all, the
output has changed since the feature table extension has been added, and
version 2 and version 3 images can't possibly have the same test output.
Change the test case to completely ignore IMGOPTS and run the test for
both compat=1.1 and compat=0.10 regardless of the ./check command line.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds an -o option to qemu-iotests, which is an option string that
is passed through to qemu-img create -o... This allows testing different
subformat with a command like './check -qcow2 -o compat=0.10'.
For qcow2, if no compat option is specified, compat=1.1 is the new
default.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new autotests in tests/ generate a number of files, both
executable and source, which are not caught by the existing .gitignore
files. This patch adds a new .gitignore in tests/ which covers these.
[Changed 'rtc-test' to '*-test' so future tests do not need to be added
to .gitignore on a case-by-case basis. Stefan]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
`hostname -s` may output an errror:
hostname: Name or service not known
This causes all tests to fail for `make check-block`.
Suppress such error messages, letting the tests succeed.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
According comment, we should not read again, we will write.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the BlockDriverState is closed/freed without draining the AIO
requests first, the request coroutines may work on invalid data and file
descriptors or have some dangling pointers that cause segfaults.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Some image formats do have a cluster size, others don't, but there are
tests that work with both sets of images and currently we get failures
because the qemu-img create output doesn't mention the cluster size for
some formats.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The special target should not be needed anymore, and caused (perhaps
due to a Make bug) a failure with "make -j2". In any case, the
main makefile is a better place for such special targets rather
than an included makefile.
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qemu-io requires options first, then fixed parameters.
GNU getopt also allows options at the end, but POSIX getopt
doesn't. Try "export POSIXLY_CORRECT=y" to get the POSIX
behaviour with GNU getopt, too.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img requires first options, then file name, then size.
GNU getopt also allows options at the end, but POSIX getopt
doesn't. Try "export POSIXLY_CORRECT=y" to get the POSIX
behaviour with GNU getopt, too.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The immportant thing here is that header extensions don't get silently
dropped when the header is rewritten, e.g. during a rebase.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a tool that is meant to inspect and edit qcow2 files in a
low-level way, that wouldn't be possible with qemu-img/io, for example
by adding yet unknown extensions or flags. This way we can test whether
qemu deals properly with future backwards compatible extensions.
For now, let's start with the image header and header extensions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Avoid this warning on OpenBSD:
CC tests/rtc-test.o
/src/qemu/tests/rtc-test.c: In function 'check_time':
/src/qemu/tests/rtc-test.c:171: warning: format '%ld' expects type 'long int', but argument 2 has type 'time_t'
/src/qemu/tests/rtc-test.c:173: warning: format '%ld' expects type 'long int', but argument 2 has type 'time_t'
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Trace objects are also needed if tracing is enabled.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This also includes a qtest wrapper script to make it easier to launch qtest
tests directly.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This introduces new test reporting infrastructure based on
gtester and gtester-report.
Also, all existing tests are moved to tests/, and tests/Makefile
is reorganized to factor out the commonalities in the rules.
Signed-off-by: Anthony Liguori <aliguori@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While QMP in general is designed so that it is possible to ignore
unknown arguments, in the case of the QMP server it is better to
reject them to detect bad clients. In fact, we're already doing
this at the top level in the argument checker. To extend this to
complex structures, add a mode to the input visitor where it checks
for unvisited keys and raises an error if it finds one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
All the deps are here but the test was never added to the list of tests
for make check
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This was added by mistake a while back.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This creates a new test group 'quick' for some test case that take at
most a couple of seconds each, so that the group can be run during a
quick 'make check'
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests that qemu-img rebase doesn't assume that the backing file has
the same size as the image, but considers that it can be smaller.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
qemu-iotests supports the -nocache option which makes the tests run with
cache=none. For blkdebug tests with qcow2 this means that we may see
test results that differ from cache=writethrough. This patch makes the
diff a bit smaller and therefore easier to review.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This one makes it possible to run qemu-iotests on a Windows build using Wine
and get somewhat meaningful results.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds a test suite for the image streaming feature. It
exercises the 'block_stream', 'block_job_cancel', 'block_job_set_speed',
and 'query-block-jobs' QMP commands.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block layer tests that involve QMP commands rather than qemu-img or
qemu-io are not well-suited for shell scripting. This patch adds a
Python module which allows tests to be written in Python instead.
The basic API is:
VM - class for launching and interacting with a VM
QMPTestCase - abstract base class for tests that use QMP
qemu_img() - wrapper function for invoking qemu-img
qemu_io() - wrapper function for invoking qemu-io
imgfmt - the image format under test (e.g. qcow2, qed)
test_dir - scratch directory path for temporary files
main() - entry point for running tests
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since qemu-iotests may need to create large image files it is possible
to specify the test directory. The TEST_DIR variable needs to be
exported so non-bash tests can make use of it.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since we might want to test arbitrary qemu, qemu-img and
qemu-io paths, allow users to specify environment variable
values for QEMU_PROG, QEMU_IMG_PROG and QEMU_IO_PROG so
the testsuite will use those values rather than find them
on PATH. Obviously, if such env variables are not set
prior to script execution, normal detection mechanism
takes place.
Signed-off-by: Lucas Meneghel Rodrigues <lmr@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Print the paths of the programs under test
(qemu, qemu-img and qemu-io).
Signed-off-by: Lucas Meneghel Rodrigues <lmr@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Test loading internal snapshots where the L1 table of the snapshot
is smaller than the current L1 table.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Until recently, qemu-img create displayed cluster_size=0 for the default
cluster size. It is changed to display the real cluster size now, which results
in the cluster size not being filtered out any more.
If the cluster size is specified explicitly in CLUSTER_SIZE, keep the output,
and if using the default, filter it out. This mostly restores the old behaviour
of the test cases; test 015 must be fixed to use CLUSTER_SIZE instead of using
extra_img_options for it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
QED now supports the truncate (aka resize) operation for growing images.
Update test 025 so it runs for QED.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
rbd implements bdrv_truncate, so test 025 will work.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
016 writes past EOF which isn't support by most protocols, so limit
it to file and sheepdog, which explicitly support it.
Pointed out by Josh Durgin <josh.durgin@dreamhost.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
The io_pattern style functions have the following loop:
for i in `seq 1 $count`; do
echo ... $(( start + i * step )) ...
done
Offsets are 1-based so start=1024, step=512, count=4 yields:
1536, 2048, 2560, 3072
Normally we expect:
1024, 1536, 2048, 2560
Most tests ignore this detail, which means that they perform I/O to a
slightly different range than expected by the test author.
Later on things got less innocent and tests started trying to compensate
for the 1-based indexing. This included negative start values in test
024 and my own attempt with count-1 in test 028!
The end result is that tests that use io_pattern are hard to reason
about and don't work the way you'd expect. It's time to clean this mess
up.
This patch switches io_pattern to 0-based offsets. This requires
adjusting the golden outputs since I/O ranges are now shifted and output
differs.
Verifying these output diffs is easy, however. Each diff hunk moves one
I/O from beyond the end of the pattern range to the beginning.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch introduces tests for protocols other than file, and
initially supports rbd and sheepdog.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Test 019 can be run with qcow2 and qed image formats. Replace the
specific image format value with "IMGFMT" so the golden output does not
hardcode qcow2 or qed.
This patch also includes a typo fix for "occurrences".
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
