Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Canokey core currently using 16 bytes as maximum packet size for
control endpoint, but to run the device in high-speed a 64 bytes
maximum packet size is required according to USB 2.0 specification.
Since we don't acutally need to run the device in high-speed, simply
don't assign high member in USBDesc.
When canokey-qemu is used with xhci, xhci would drive canokey
in high speed mode, since the bcdUSB in canokey-core is 2.1,
yet canokey-core set bMaxPacketSize0 to be 16, this is out
of the spec as the spec said that ``The allowable maximum
control transfer data payload sizes...for high-speed devices,
it is 64 bytes''.
In this case, usb device validation in Windows 10 LTSC 2021
as the guest would fail. It would complain
USB\DEVICE_DESCRIPTOR_VALIDATION_FAILURE.
Note that bcdUSB only identifies the spec version the device
complies, but it has no indication of its speed. So it is
allowed for the device to run in FS but comply the 2.1 spec.
To solve the issue we decided to just drop the high
speed support. This only affects usb-ehci as usb-ehci would
complain speed mismatch when FS device is attached to a HS port.
That's why the .high member was initialized in the first place.
Meanwhile, xhci is not affected as it works well with FS device.
Since everyone is now using xhci, it does no harm to most users.
Suggested-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Signed-off-by: YuanYang Meng <mkfssion@mkfssion.com>
Reviewed-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Message-Id: <20220625142138.19363-1-mkfssion@mkfssion.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
CCID could send zero-length packet (ZLP)
if we invoke two data_in, two packets would be concated
and we could not distinguish them.
The CANOKEY_EMU_EP_CTAPHID is imported from canokey-qemu.h
Reported-by: MkfsSion <myychina28759@gmail.com>
Signed-off-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Message-Id: <YqcqGz0s3+LE42ms@Sun>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When launching QEMU with "-loadvm", usbredir_create_parser() should avoid
setting up the hello packet (just as with "-incoming". On the latest version
of libusbredir, usbredirparser_unserialize() will return error if the parser
is not "pristine."
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-Id: <20220507041850.98716-1-j@getutm.app>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'active' bit passes control over a qTD between the guest and the
controller: set to 1 by guest to enable execution by the controller,
and the controller sets it to '0' to hand back control to the guest.
ehci_state_writeback write two dwords to main memory using DMA:
the third dword of the qTD (containing dt, total bytes to transfer,
cpage, cerr and status) and the fourth dword of the qTD (containing
the offset).
This commit makes sure the fourth dword is written before the third,
avoiding a race condition where a new offset written into the qTD
by the guest after it observed the status going to go to '0' gets
overwritten by a 'late' DMA writeback of the previous offset.
This race condition could lead to 'cpage out of range (5)' errors,
and reproduced by:
./qemu-system-x86_64 -enable-kvm -bios $SEABIOS/bios.bin -m 4096 -device usb-ehci -blockdev driver=file,read-only=on,filename=/home/aengelen/Downloads/openSUSE-Tumbleweed-DVD-i586-Snapshot20220428-Media.iso,node-name=iso -device usb-storage,drive=iso,bootindex=0 -chardev pipe,id=shell,path=/tmp/pipe -device virtio-serial -device virtconsole,chardev=shell -device virtio-rng-pci -serial mon:stdio -nographic
(press a key, select 'Installation' (2), and accept the default
values. On my machine the 'cpage out of range' is reproduced while
loading the Linux Kernel about once per 7 attempts. With the fix in
this commit it no longer fails)
This problem was previously reported as a seabios problem in
https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/thread/OUTHT5ISSQJGXPNTUPY3O5E5EPZJCHM3/
and as a nixos CI build failure in
https://github.com/NixOS/nixpkgs/issues/170803
Signed-off-by: Arnout Engelen <arnout@bzzt.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This commit added a new emulated device called CanoKey to QEMU.
CanoKey implements platform independent features in canokey-core
https://github.com/canokeys/canokey-core, and leaves the USB implementation
to the platform.
In this commit the USB part was implemented in QEMU using QEMU's USB APIs,
therefore the emulated CanoKey can communicate with the guest OS using USB.
Signed-off-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Message-Id: <YoY6Mgph6f6Hc/zI@Sun>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
module_kconfig is a new directive that should be used with module_obj
whenever that module depends on the Kconfig to be enabled.
When the module is enabled in Kconfig we are sure that its dependencies
will be enabled as well, thus the module will be loaded without any
problem.
The correct way to use module_kconfig is by passing the Kconfig option
to module_kconfig (or the *config-devices.mak without CONFIG_).
Signed-off-by: Jose R. Ziviani <jziviani@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Message-Id: <165369002370.5857.12150544416563557322.stgit@work>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
qemu_oom_check() is a function which essentially says "if you pass me
a NULL pointer then print a message then abort()". On POSIX systems
the message includes strerror(errno); on Windows it includes the
GetLastError() error value printed as an integer.
Other than in the implementation of qemu_memalign(), we use this
function only in hw/usb/redirect.c, for three checks:
* on a call to usbredirparser_create()
* on a call to usberedirparser_serialize()
* on a call to malloc()
The usbredir library API functions make no guarantees that they will
set errno on errors, let alone that they might set the
Windows-specific GetLastError string. malloc() is documented as
setting errno, not GetLastError -- and in any case the only thing it
might set errno to is ENOMEM. So qemu_oom_check() isn't the right
thing for any of these. Replace them with straightforward
error-checking code. This will allow us to get rid of
qemu_oom_check().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220226180723.1706285-2-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since isochronous transfers cannot be handled async (the function
returns error in that case) we don't need to remember the packet.
Avoid using the usb_packet field in OHCIState (as that can be a
waiting async packet on another endpoint) and allocate and use a local
USBPacket for the iso transfer instead. After this we don't have to
care if we're called from a completion callback or not so we can drop
that parameter as well.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <bf523d40f8088a84383cb00ffd2e6e82fa47790d.1643117600.git.balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These two do the same and only used once so no need to have two
functions, simplify by merging them.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <5fc8ba0bbf55703014d22dd06ab2f9eabaf370bf.1643117600.git.balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is always done before calling this function so remove duplicated
code and do it within the function at one place.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <ce766722506bfd7145cccbec750692ff57072280.1643117600.git.balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Current code creates directories with mode 0644. Even the creator
can't create files in the new directory. Set all x mode flags in
variable mask and clear all x mode flags in function open() to
preserve the current open mode.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220122140619.7514-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
xhciwmi.exe is used inside Windows 2022 SVVP tests. This tool called as
'xhciwmi.exe --verify' reports that 'The firmware loaded on this
controller has known bugs and/or compatibility issues'. This is just
a warning but there is no particular sense to ignore it.
This patch just pacifies the tool.
There is a big question whether this change should be put using
machine type mechanics, but at my opinion this would be an overkill.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Tested-by: Pavel Polozov <pavel.polozov@virtuozzo.com>
CC: Yan Vugenfirer <yvugenfi@redhat.com>
CC: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Message-Id: <20211223095443.130276-1-den@openvz.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
More than 1k of TypeInfo instances are already marked as const. Mark the
remaining ones, too.
This commit was created with:
git grep -z -l 'static TypeInfo' -- '*.c' | \
xargs -0 sed -i 's/static TypeInfo/static const TypeInfo/'
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20220117145805.173070-2-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Otherwise we run the error handling code even for successful requests.
Fixes: 13b250b12a ("uas: add stream number sanity checks.")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211210080659.2537084-1-kraxel@redhat.com>
A device of USB video class usually uses larger desc structure, so
use larger buffer to avoid failure. (dev-video.c is ready)
This is an unlikely code path:
1, during guest startup, guest tries to probe device.
2, run 'lsusb' command in guest(or other similar commands).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220112015835.900619-1-pizhenwei@bytedance.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Linux need to fill up the HID descriptor in order to let the driver be
emulated. The descriptor was downloaded from [1]. The patch was tested
with evtest tool on top of qemu 5.2.0 with linux kernel 4.19.208.
[1] https://github.com/linuxwacom/wacom-hid-descriptors/tree/master/Wacom%20PenPartner
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Message-Id: <20220112090125.381364-1-dario.binacchi@amarulasolutions.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Let devices specify transaction attributes when calling ld*_pci_dma().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-22-philmd@redhat.com>
dma_memory_read() returns a MemTxResult type. Do not discard
it, return it to the caller.
Update the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-19-philmd@redhat.com>
Let devices specify transaction attributes when calling ld*_dma().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-17-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_memory_map().
Patch created mechanically using spatch with this script:
@@
expression E1, E2, E3, E4;
@@
- dma_memory_map(E1, E2, E3, E4)
+ dma_memory_map(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-7-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_memory_rw().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-5-philmd@redhat.com>
This is a counterpart to the HMP "info usb" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This device is part of a superio/ISA bridge chip and IRQs from it are
routed to an ISA interrupt set by the Interrupt Line PCI config
register. Implement this in a vt82c686-uhci-pci specific irq handler
Using via_isa_set_irq().
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <8d7ed385e33a847d8ddc669163a68b5ca57f82ce.1635161629.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instead of using pci_set_irq, store the irq in the device state and
use it explicitly so variants having different interrupt handling can
use their own.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <b39066e03c8731f4197d50bc79b403f797599999.1635161629.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Because this device only works as part of VIA superio chips set user
creatable to false. Since the class init method is common for UHCI
variants introduce a flag in UHCIInfo for this.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <e6abf1f19ca72bbc2d8a5a6aa941edbf87a9845f.1635161629.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fix a comment for coding style so subsequent patch will not get
checkpatch error and simplify and shorten uhci_update_irq().
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <b68a57dfcf181e73272b4dc951f8cc6e76b0d182.1635161629.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Rename qbus_create_inplace() to qbus_init(); this is more in line
with our usual naming convention for functions that in-place
initialize objects.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20210923121153.23754-5-peter.maydell@linaro.org
The function scsi_bus_new() creates a new SCSI bus; callers can
either pass in a name argument to specify the name of the new bus, or
they can pass in NULL to allow the bus to be given an automatically
generated unique name. Almost all callers want to use the
autogenerated name; the only exception is the virtio-scsi device.
Taking a name argument that should almost always be NULL is an
easy-to-misuse API design -- it encourages callers to think perhaps
they should pass in some standard name like "scsi" or "scsi-bus". We
don't do this anywhere for SCSI, but we do (incorrectly) do it for
other bus types such as i2c.
The function name also implies that it will return a newly allocated
object, when it in fact does in-place allocation. We more commonly
name such functions foo_init(), with foo_new() being the
allocate-and-return variant.
Replace all the scsi_bus_new() callsites with either:
* scsi_bus_init() for the usual case where the caller wants
an autogenerated bus name
* scsi_bus_init_named() for the rare case where the caller
needs to specify the bus name
and document that for the _named() version it's then the caller's
responsibility to think about uniqueness of bus names.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210923121153.23754-2-peter.maydell@linaro.org
The device uses the guest-supplied stream number unchecked, which can
lead to guest-triggered out-of-band access to the UASDevice->data3 and
UASDevice->status3 fields. Add the missing checks.
Fixes: CVE-2021-3713
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reported-by: Chen Zhe <chenzhe@huawei.com>
Reported-by: Tan Jingguo <tanjingguo@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210818120505.1258262-2-kraxel@redhat.com>
Since commit 9894dc0cdc "char: convert
from GIOChannel to QIOChannel", the first argument to the watch callback
can actually be a QIOChannel, which is not a GIOChannel (but a QEMU
Object).
Even though we never used that pointer, change the callback type to warn
the users. Possibly a better fix later, we may want to store the
callback and call it from intermediary functions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
data might point into the middle of a larger buffer, there is a separate
free_on_destroy pointer passed into bufp_alloc() to handle that. It is
only used in the normal workflow though, not when dropping packets due
to the queue being full. Fix that.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/491
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210722072756.647673-1-kraxel@redhat.com>
On windows we can't wait on file descriptors.
Poll libusb using a timer instead.
Fixes long-standing FIXME.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/431
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210623085249.1151901-2-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Drop one more shared library dependency (libusb) from core qemu.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-34-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-33-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce an usb device flag instead, set it when usb-host looks at the
device descriptors anyway. Also set it for emulated storage devices,
for consistency. Add an inline helper function to check the flag.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-32-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-11-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-10-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The GDateTime APIs provided by GLib avoid portability pitfalls, such
as some platforms where 'struct timeval.tv_sec' field is still 'long'
instead of 'time_t'. When combined with automatic cleanup, GDateTime
often results in simpler code too.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Per xHCI spec v1.2 chapter 4.17.5 page 296:
If MSI or MSI-X interrupts are enabled, Interrupt Pending (IP)
shall be cleared automatically when the PCI dword write generated
by the interrupt assertion is complete.
Currently QEMU does not clear the IP flag in the MSI / MSI-X mode.
This causes subsequent spurious interrupt to be delivered to guests.
To solve this, we change the xhci intr_raise() hook routine to have
a bool return value that is passed to its caller (the xhci core),
with true indicating that IP should be self-cleared.
Fixes: 62c6ae04cf ("xhci: Initial xHCI implementation")
Fixes: 4c47f80063 ("xhci: add msix support")
Signed-off-by: Ruimei Yan <ruimei.yan@windriver.com>
[bmeng: move IP clear codes from xhci pci to xhci core]
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20210521024224.2277634-2-bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
At present MSI / MSI-X interrupts are triggered regardless of the
irq level. We should have checked the level to determine whether
the interrupt needs to be delivered.
The level check logic was present in early versions of the xhci
model, but got dropped later by a rework of interrupt handling
under commit 4c4abe7cc9 ("xhci: rework interrupt handling").
Fixes: 4c4abe7cc9 ("xhci: rework interrupt handling")
Signed-off-by: Ruimei Yan <ruimei.yan@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20210521024224.2277634-1-bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
usb-host and usb-redirect try to batch bulk transfers by combining many
small usb packets into a single, large transfer request, to reduce the
overhead and improve performance.
This patch adds a size limit of 1 MiB for those combined packets to
restrict the host resources the guest can bind that way.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210503132915.2335822-6-kraxel@redhat.com>
If the Kconfig 'USB' value is not selected, it is pointless to
build the USB core components. Add a stub for the HMP commands
and usbdevice_create() which is called by usb_device_add in
softmmu/vl.c.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210424224110.3442424-3-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Many files include qemu/log.h without needing it. Remove the superfluous
include statements.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210328054833.2351597-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Many files include hw/irq.h without needing it. Remove the superfluous
include statements.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210327050236.2232347-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Many files include hw/sysbus.h without needing it. Remove the superfluous
include statements.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210327082804.2259480-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
QEMU crashes with certain targets when trying to show the help
output of EHCI devices:
$ ./qemu-system-aarch64 -device ich9-usb-ehci1,help
qemu-system-aarch64: ../../devel/qemu/softmmu/physmem.c:1154: phys_section_add:
Assertion `map->sections_nb < TARGET_PAGE_SIZE' failed.
Aborted (core dumped)
This happens because the device is doing things at "instance_init" time
that should be done at "realize" time instead. So move the related code
to the realize() function instead. (NB: This now also matches the
memory_region_del_subregion() calls which are done in usb_ehci_unrealize(),
and not during finalize()).
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210326095155.1994604-1-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When building with --enable-sanitizers we get:
Direct leak of 32 byte(s) in 2 object(s) allocated from:
#0 0x5618479ec7cf in malloc (qemu-system-aarch64+0x233b7cf)
#1 0x7f675745f958 in g_malloc (/lib64/libglib-2.0.so.0+0x58958)
#2 0x561847f02ca2 in usb_packet_init hw/usb/core.c:531:5
#3 0x561848df4df4 in usb_ehci_init hw/usb/hcd-ehci.c:2575:5
#4 0x561847c119ac in ehci_sysbus_init hw/usb/hcd-ehci-sysbus.c:73:5
#5 0x56184a5bdab8 in object_init_with_type qom/object.c:375:9
#6 0x56184a5bd955 in object_init_with_type qom/object.c:371:9
#7 0x56184a5a2bda in object_initialize_with_type qom/object.c:517:5
#8 0x56184a5a24d5 in object_initialize qom/object.c:536:5
#9 0x56184a5a2f6c in object_initialize_child_with_propsv qom/object.c:566:5
#10 0x56184a5a2e60 in object_initialize_child_with_props qom/object.c:549:10
#11 0x56184a5a3a1e in object_initialize_child_internal qom/object.c:603:5
#12 0x561849542d18 in npcm7xx_init hw/arm/npcm7xx.c:427:5
Similarly to commit d710e1e7bd ("usb: ehci: fix memory leak in
ehci"), fix by calling usb_ehci_finalize() to free the USBPacket.
Fixes: 7341ea075c
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210323183701.281152-1-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
"-usbdevice ccid" was not documented and -usbdevice itself was marked
as deprecated before QEMU v6.0. And searching for "-usbdevice ccid"
in the internet does not show any useful results, so likely nobody
was using the ccid device via the -usbdevice option. Remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210311092829.1479051-1-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Stale data in csw (specifically residue) can confuse the state machine
and allows the guest trigger an assert(). So clear csw on reset to
avoid this happening in case the guest resets the device in the middle
of a request.
Buglink: https://bugs.launchpad.net/qemu/+bug/1523811
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210312094954.796799-1-kraxel@redhat.com>
Add new kconfig symbols so usb-storage and usb-bot can
be enabled or disabled individually at build time.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210312090425.772900-5-kraxel@redhat.com>
In preparation for splitting the usb-storage.c file move
declarations to the new usb/msd.h header file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210312090425.772900-2-kraxel@redhat.com>
Extract the VT82C686 PCI UHCI function into a new unit so
it is only build when the VT82C686 south bridge is selected.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210309190802.830969-4-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Extract generic UHCI prototypes into a new "hcd-uhci.h" local
header so we can reuse them in other units.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210309190802.830969-3-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When trying to remove the -usbdevice option, there were complaints that
"-usbdevice braille" is still a very useful shortcut for some people.
Thus we never remove this option. Since it's not such a big burden to
keep it around, and it's also convenient in the sense that you don't
have to worry to enable a host controller explicitly with this option,
we should remove it from he deprecation list again.
However, there is one exception: "-usbdevice audio" should go away, since
audio devices without "audiodev=..." parameter are also on the deprecation
list and you cannot use "-usbdevice audio" with "audiodev".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210310173323.1422754-4-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
No device needs them anymore and in fact they're undocumented.
Remove the code. The only change in behavior is that "-usbdevice
braille:hello" now reports an error, which is a bugfix.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210310173323.1422754-2-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This property was only required for the pc-1.0 and earlier machine
types. Since these have been removed now, we can delete the property
as well.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210302120152.118042-1-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
An assorted set of spelling fixes in various places.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The command complete callback has a SCSIRequest as the first argument,
and the status field of that structure is identical to the 'status'
argument. So drop the argument from the callback.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Message-Id: <20201116184041.60465-3-hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The category of the u2f-passthru device is not set, put it into the 'misc'
category.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20201130083630.2520597-10-ganqixin@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Without that wireshark complains about invalid control setup data
for non-control transfers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210216144939.841873-1-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In order to keep track of the alternate setting that should be used for
a given interface, the USBDevice struct keeps an array of alternate
setting values, which is indexed by the interface number. In
usb_host_set_interface, when this array is updated, usb_host_ep_update
is called as a result. However, when usb_host_ep_update accesses the
active libusb_config_descriptor, it indexes udev->altsetting with the
loop variable, rather than the interface number.
With the simple trace backend enable, this behavior can be seen:
[...]
usb_xhci_xfer_start 0.440 pid=1215 xfer=0x5596a4b85930 slotid=0x1 epid=0x1 streamid=0x0
usb_packet_state_change 1.703 pid=1215 bus=0x1 port=b'1' ep=0x0 p=0x5596a4b85938 o=b'undef' n=b'setup'
usb_host_req_control 2.269 pid=1215 bus=0x1 addr=0x5 p=0x5596a4b85938 req=0x10b value=0x1 index=0xd
usb_host_set_interface 0.449 pid=1215 bus=0x1 addr=0x5 interface=0xd alt=0x1
usb_host_parse_config 2542.648 pid=1215 bus=0x1 addr=0x5 value=0x2 active=0x1
usb_host_parse_interface 1.804 pid=1215 bus=0x1 addr=0x5 num=0xc alt=0x0 active=0x1
usb_host_parse_endpoint 2.012 pid=1215 bus=0x1 addr=0x5 ep=0x2 dir=b'in' type=b'int' active=0x1
usb_host_parse_interface 1.598 pid=1215 bus=0x1 addr=0x5 num=0xd alt=0x0 active=0x1
usb_host_req_emulated 3.593 pid=1215 bus=0x1 addr=0x5 p=0x5596a4b85938 status=0x0
usb_packet_state_change 2.550 pid=1215 bus=0x1 port=b'1' ep=0x0 p=0x5596a4b85938 o=b'setup' n=b'complete'
usb_xhci_xfer_success 4.298 pid=1215 xfer=0x5596a4b85930 bytes=0x0
[...]
In particular, it is seen that although usb_host_set_interface sets the
alternate setting of interface 0xd to 0x1, usb_host_ep_update uses 0x0
as the alternate setting due to using the incorrect index to
udev->altsetting.
Fix this problem by getting the interface number from the active
libusb_config_descriptor, and then using that as the index to
udev->altsetting.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Message-Id: <20210201213021.500277-1-rosbrookn@ainfosec.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently, blk_is_read_only() tells whether a given BlockBackend can
only be used in read-only mode because its root node is read-only. Some
callers actually try to answer a slightly different question: Is the
BlockBackend configured to be writable, by taking write permissions on
the root node?
This can differ, for example, for CD-ROM devices which don't take write
permissions, but may be backed by a writable image file. scsi-cd allows
write requests to the drive if blk_is_read_only() returns false.
However, the write request will immediately run into an assertion
failure because the write permission is missing.
This patch introduces separate functions for both questions.
blk_supports_write_perm() answers the question whether the block
node/image file can support writable devices, whereas blk_is_writable()
tells whether the BlockBackend is currently configured to be writable.
All calls of blk_is_read_only() are converted to one of the two new
functions.
Fixes: https://bugs.launchpad.net/bugs/1906693
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210118123448.307825-2-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Handle host superspeedplus (usb 3.1+) devices like superspeed (usb 3.0)
devices. That is enough to get them handled properly by xhci. They show
up as superspeed devices inside the guest, but should be able to actually
run at higher speeds.
Reported-by: Angel Pagan <Angel.Pagan@stratus.com>
Tested-by: Angel Pagan <Angel.Pagan@stratus.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210121150832.3564097-1-kraxel@redhat.com>
Log all traffic of a specific usb device to a pcap file for later
inspection. File format is compatible with linux usb monitor.
Usage:
qemu -device usb-${somedevice},pcap=file.pcap
wireshark file.pcap
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210119194452.2148048-1-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We are not ready to handle additional CDB data.
If a guest sends a packet with such additional data,
report the command parameter as not supported.
Specify a size (of 1 byte) for the add_cdb member we
are not using, to fix the following warning:
usb/dev-uas.c:157:31: error: field 'status' with variable sized type 'uas_iu' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
uas_iu status;
^
Reported-by: Ed Maste <emaste@FreeBSD.org>
Reported-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Reported-by: Han Han <hhan@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210120153522.1173897-4-philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For some reason the assert() added in commit ccb799313a
("hw/usb: avoid format truncation warning when formatting
port name") does not fix when building with GCC 10.
KISS and expand the buffer by 4 bytes to silent the following
error when using GCC 10.2.1 on Fedora 33:
hw/usb/hcd-xhci.c: In function 'usb_xhci_realize':
hw/usb/hcd-xhci.c:3309:54: error: '%d' directive output may be truncated writing between 1 and 8 bytes into a region of size 5 [-Werror=format-truncation=]
3309 | snprintf(port->name, sizeof(port->name), "usb2 port #%d", i+1);
| ^~~~~~~~~~~~~~~
hw/usb/hcd-xhci.c:3309:54: note: directive argument in the range [1, 89478486]
In file included from /usr/include/stdio.h:866,
from include/qemu/osdep.h:85,
from hw/usb/hcd-xhci.c:22:
/usr/include/bits/stdio2.h:70:10: note: '__builtin___snprintf_chk' output between 13 and 20 bytes into a destination of size 16
70 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
71 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/usb/hcd-xhci.c:3323:54: error: '%d' directive output may be truncated writing between 1 and 8 bytes into a region of size 5 [-Werror=format-truncation=]
3323 | snprintf(port->name, sizeof(port->name), "usb3 port #%d", i+1);
| ^~~~~~~~~~~~~~~
hw/usb/hcd-xhci.c:3323:54: note: directive argument in the range [1, 89478486]
In file included from /usr/include/stdio.h:866,
from include/qemu/osdep.h:85,
from hw/usb/hcd-xhci.c:22:
/usr/include/bits/stdio2.h:70:10: note: '__builtin___snprintf_chk' output between 13 and 20 bytes into a destination of size 16
70 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
71 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210118181115.313742-1-philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Device code shouldn't mess with QOM property "realized" since we have
proper interfaces (merge commit 6675a653). Commit 8ddab8dd3d
"usb/hcd-xhci: Split pci wrapper for xhci base model" and commit
f00ff136ee "usb: hcd-xhci-sysbus: Attach xhci to sysbus device"
reintroduced two instances. Clean them up. Note that s->xhci is
a (bus-less) TYPE_XHCI device.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210119120151.53757-1-armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-id: 20201119025751.45750-1-alex.chen@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
USBDEVFS_GET_SPEED is used since version 5.2.0 and
202d69a715
resulting in the following build failure with kernel < 5.0:
../hw/usb/host-libusb.c: In function 'usb_host_open':
../hw/usb/host-libusb.c:953:32: error: 'USBDEVFS_GET_SPEED' undeclared (first use in this function); did you mean 'USBDEVFS_GETDRIVER'?
int rc = ioctl(hostfd, USBDEVFS_GET_SPEED, NULL);
^~~~~~~~~~~~~~~~~~
USBDEVFS_GETDRIVER
A tentative was made to fix this build failure with
4969e697c1
However, the assumption that distros with old kernels also have old
libusb is just wrong so also add a check for defined(USBDEVFS_GET_SPEED)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Message-id: 20201213213016.457350-1-fontaine.fabrice@gmail.com
[ kraxel: codestyle whitespace fixup ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This commit is the result of running the timer-del-timer-free.cocci
script on the whole source tree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
Commit 8118f0950f "migration: Append JSON description of migration
stream" needs a JSON writer. The existing qobject_to_json() wasn't a
good fit, because it requires building a QObject to convert. Instead,
migration got its very own JSON writer, in commit 190c882ce2 "QJSON:
Add JSON writer". It tacitly limits numbers to int64_t, and strings
contents to characters that don't need escaping, unlike
qobject_to_json().
The previous commit factored the JSON writer out of qobject_to_json().
Replace migration's JSON writer by it.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Generalize the qdev_hotplug variable to the different phases of
machine initialization. We would like to allow different
monitor commands depending on the phase.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This model is a top level integration wrapper for hcd-dwc3 and
versal-usb2-ctrl-regs modules, this is used by xilinx versal soc's and
future xilinx usb subsystems would also be part of it.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1607023357-5096-4-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds skeleton model of dwc3 usb controller attached to
xhci-sysbus device. It defines global register space of DWC3 controller,
global registers control the AXI/AHB interfaces properties, external FIFO
support and event count support. All of which are unimplemented at
present,we are only supporting core reset and read of ID register.
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1607023357-5096-3-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This module emulates control registers of versal usb2 controller, this is added
just to make guest happy. In general this module would control the phy-reset
signal from usb controller, data coherency of the transactions, signals
the host system errors received from controller.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1607023357-5096-2-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the "default y" for USB_XHCI_SYSBUS because
sysbus devices are not user creatable; boards that use them will
specify them manually with "imply" or "select" clauses.
It would be nice to keep the ability to remove PCIe and USB from microvm,
since thos can be disabled on the command line and therefore should not
be included if QEMU is configured --without-default-devices. However
it's too late for 5.2 to figure out a place for the DSDT creation code.
Reported-by: Bruce Rogers <brogers@suse.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=GI5d
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-11-15' into staging
Fix Lesser GPL license versions (should be "2.1" and not "2")
# gpg: Signature made Sun 15 Nov 2020 16:20:10 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-11-15: (26 commits)
nomaintainer: Fix Lesser GPL version number
test: Fix LGPL information in the file headers
tests/acceptance: Fix LGPL information in the file headers
tests/migration: Fix LGPL information in the file headers
sparc tcg cpus: Fix Lesser GPL version number
e1000e: Fix Lesser GPL version number
x86 hvf cpus: Fix Lesser GPL version number
nvdimm: Fix Lesser GPL version number
w32: Fix Lesser GPL version number
tpm: Fix Lesser GPL version number
overall/alpha tcg cpus|hppa: Fix Lesser GPL version number
overall usermode...: Fix Lesser GPL version number
migration: Fix Lesser GPL version number
parallel nor flash: Fix Lesser GPL version number
arm tcg cpus: Fix Lesser GPL version number
x86 tcg cpus: Fix Lesser GPL version number
linux user: Fix Lesser GPL version number
usb: Fix Lesser GPL version number
tricore tcg cpus: Fix Lesser GPL version number
xtensa tcg cpus: Fix Lesser GPL version number
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The v variable goes negative for reg < 0x20. Reorder the code
to first sanity check then calculate v and assign intr to make
sanity checkers happy.
Buglink: https://bugs.launchpad.net/qemu/+bug/1902112
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201105134112.25119-7-kraxel@redhat.com
Add property so scsi command logging can be switched
at runtime instead of compile time.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201105134112.25119-3-kraxel@redhat.com
Replace most DPRINTF macros with trace events.
Drop some DPRINTF macros.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201105134112.25119-2-kraxel@redhat.com
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122332.19369-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Storing properties directly in XHCIPciState.xhci doesn't work,
the object_initialize_child() call in xhci_instance_init() will
overwrite them.
This changes the defaults for some properties, which in turn breaks
live migration and possibly other things as well.
So add XHCINecState, store properties there, copy them over on
instance init.
Fixes: 8ddab8dd3d ("usb/hcd-xhci: Split pci wrapper for xhci base model")
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201112103741.2335-1-kraxel@redhat.com
Since commit 755fba11fb and 8ddab8dd3d we can not build
USB_XHCI_NEC without USB_XHCI_PCI. Correct the Kconfig
dependency.
Fixes: 755fba11fb ("usb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c")
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201109135300.2592982-2-philmd@redhat.com
[ kraxel: restore "default y if PCI_DEVICES" because
"qemu-system-ppc64 -M pseries,usb=on" needs USB_XHCI_NEC=y ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Note that whilst the device does not do anything with these values, they are
logged with trace events and stored to allow future implementation.
The default flow control is set to none at reset as documented in the Linux
ftdi_sio.h header file.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20201027150456.24606-9-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also implement the behaviour reported in Linux's ftdi_sio.c whereby if an invalid
data_bits value is provided then the hardware defaults to using 8.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201027150456.24606-8-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some operating systems will generate a new device ID when a USB device is unplugged
and then replugged into the USB. If this is done whilst switching between multiple
applications over a virtual serial port, the change of device ID requires going
back into the OS/application to locate the new device accordingly.
Add a new always-plugged property that if specified will ensure that the device
always remains attached to the USB regardless of the state of the backend
chardev.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20201027150456.24606-7-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The DeviceOutVendor and DeviceInVendor macros can be replaced with their
equivalent VendorDeviceOutRequest and VendorDeviceRequest macros from usb.h.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201027150456.24606-6-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The NPCM730 and NPCM750 chips have a single USB host port shared between
a USB 2.0 EHCI host controller and a USB 1.1 OHCI host controller. This
adds support for both of them.
Testing notes:
* With -device usb-kbd, qemu will automatically insert a full-speed
hub, and the keyboard becomes controlled by the OHCI controller.
* With -device usb-kbd,bus=usb-bus.0,port=1, the keyboard is directly
attached to the port without any hubs, and the device becomes
controlled by the EHCI controller since it's high speed capable.
* With -device usb-kbd,bus=usb-bus.0,port=1,usb_version=1, the
keyboard is directly attached to the port, but it only advertises
itself as full-speed capable, so it becomes controlled by the OHCI
controller.
In all cases, the keyboard device enumerates correctly.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
USB_XHCI does not depend on PCI any more.
USB_XHCI_SYSBUS must select USB_XHCI not USB.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 20201020074844.5304-5-kraxel@redhat.com
The helper generates an acpi dsdt device entry
for the xhci sysbus device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201020074844.5304-4-kraxel@redhat.com
Move a bunch of defines which might be needed outside core xhci
code to that place. Add XHCI_ prefixes to avoid name clashes.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 20201020074844.5304-3-kraxel@redhat.com
Check the value of mps to avoid potential divide-by-zero later in the function.
Since HCCHAR_MPS is guest controllable, this prevents a malicious/buggy guest
from crashing the QEMU process on the host.
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reviewed-by: Paul Zimmerman <pauldzim@gmail.com>
Reported-by: Gaoning Pan <gaoning.pgn@antgroup.com>
Reported-by: Xingwei Lin <linyi.lxw@antfin.com>
Message-id: 20201015075957.268823-1-mcascell@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The EHCI Host Controller emulation attempt to locate the device
associated with a periodic isochronous transfer description (iTD) and
when this fail the host controller is reset.
But according the EHCI spec 1.0 section 5.15.2.4 Host System
Error, the host controller is supposed to reset itself only when it
failed to communicate with the Host (Operating System), like when
there's an error on the PCI bus. If a transaction fails, there's
nothing in the spec that say to reset the host controller.
This patch rework the error path so that the host controller can keep
working when the OS setup a bogus transaction, it also revert to the
behavior of the EHCI emulation to before commits:
e94682f1fe ("ehci: check device is not NULL before calling usb_ep_get()")
7011baece2 ("usb: remove unnecessary NULL device check from usb_ep_get()")
The issue has been found while trying to passthrough a USB device to a
Windows Server 2012 Xen guest via "usb-ehci", which prevent the USB
device from working in Windows. ("usb-ehci" alone works, windows only
setup this weird periodic iTD to device 127 endpoint 15 when the USB
device is passthrough.)
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-id: 20201014104106.2962640-1-anthony.perard@citrix.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Change several assert()s to qemu_log_mask(LOG_GUEST_ERROR...),
to prevent the guest from causing Qemu to assert. Also fix up
several existing qemu_log_mask()s to include the function name in
the message.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200920021449.830-1-pauldzim@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use XHCI as sysbus device, add memory region property to get the
address space instance for dma read/write.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-5-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch sets the base to use xhci as sysbus model, for which pci
specific hooks are moved to hcd-xhci-pci.c. As a part of this requirment
msi/msix interrupts handling is moved under XHCIPCIState. Made required
changes for qemu-xhci-nec.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-4-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move pci specific devices to new file. This set the environment to move all
pci specific hooks in hcd-xhci.c to hcd-xhci-pci.c.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-3-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch starts making the hcd-xhci.c pci free, as part of this
restructuring dma read/writes are handled without passing pci object.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1600957256-6494-2-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While servicing OHCI transfer descriptors(TD), ohci_service_iso_td
retires a TD if it has passed its time frame. It does not check if
the TD was already processed once and holds an error code in TD_CC.
It may happen if the TD list has a loop. Add check to avoid an
infinite loop condition.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-id: 20200915182259.68522-3-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Just use qemu_open_old() for a quick fix, switch
to better error handling left for another day.
Fixes: 448058aa99 ("util: rename qemu_open() to qemu_open_old()")
Cc: César Belley <cesar.belley@lse.epita.fr>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20200918110122.9121-1-kraxel@redhat.com
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
- Expand CODING_STYLE.rst a little more
- usb-host build fix
- allow check-softfloat unit tests without TCG
- simplify mips imm_branch so compiler isn't confused
- mark ppc64abi32 for deprecation
- more compiler soothing in pch_rev_id
- allow acceptance to skip missing binaries
- more a bunch of plugins to contrib
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl9Z9wkACgkQ+9DbCVqe
KkRbkQf9HLRDEUSy/1LqbU7ncHzgCmnlzC0MKCqn/L3e+M916naO3xhu0tbJN9Ks
nxu9irY1mGrj/gK+gJ9lr50GOvcc8XCFTpE82MisMRWWFeVRt3vYLAql7WcY0ioM
K6jMMfoVswmVetP034llQhsAt9zvFimL89kp4O4i2Mjw5shsBIPfharXnnhL4EgS
ykKmUdLWxAJPSOJJA71IAFP9UzMYfXg7/NHFK1SMVOWZjMT18aoa6YDzBpbr4KzX
4vOvgGK3tBlVuOooSew7By6iR5oBPa5GP7O9Z78osCsyvzJMPcoNxQZyvgnS0Tda
q6+/QeF9/ooDPkg5Jq6Z8EAsY0q+XA==
=PIOR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-fixes-100920-1' into staging
Various misc and testing fixes:
- Expand CODING_STYLE.rst a little more
- usb-host build fix
- allow check-softfloat unit tests without TCG
- simplify mips imm_branch so compiler isn't confused
- mark ppc64abi32 for deprecation
- more compiler soothing in pch_rev_id
- allow acceptance to skip missing binaries
- more a bunch of plugins to contrib
# gpg: Signature made Thu 10 Sep 2020 10:51:05 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-fixes-100920-1:
plugins: move the more involved plugins to contrib
tests/acceptance: Add Test.fetch_asset(cancel_on_missing=True)
tests: bump avocado version
hw/i386: make explicit clearing of pch_rev_id
configure: don't enable ppc64abi32-linux-user by default
docs/system/deprecated: mark ppc64abi32-linux-user for deprecation
target/mips: simplify gen_compute_imm_branch logic
tests/meson.build: fp tests don't need CONFIG_TCG
usb-host: restrict workaround to new libusb versions
CODING_STYLE.rst: flesh out our naming conventions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
