Commit b1f1e9dcfa renamed 'riscv,delegate' to 'riscv,delegation' since
it is the correct name as per dt-bindings, and the absence of the
correct name will result in validation fails when dumping the dtb and
using dt-validate.
But this change has a side-effect: every other firmware available that
is AIA capable is using 'riscv,delegate', and it will fault/misbehave if
this property isn't present. The property was added back in QEMU 7.0,
meaning we have 2 years of firmware development using the wrong
property.
Re-introducing 'riscv,delegate' while keeping 'riscv,delegation' allows
older firmwares to keep booting with the 'virt' machine.
'riscv,delegate' is then marked for future deprecation with its use
being discouraged from now on.
Cc: Conor Dooley <conor@kernel.org>
Cc: Anup Patel <apatel@ventanamicro.com>
Fixes: b1f1e9dcfa ("hw/riscv/virt.c: aplic DT: rename prop to 'riscv, delegation'")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240715090455.145888-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Both CSRRS and CSRRC always read the addressed CSR and cause any read side
effects regardless of rs1 and rd fields. Note that if rs1 specifies a register
holding a zero value other than x0, the instruction will still attempt to write
the unmodified value back to the CSR and will cause any attendant side effects.
So if CSRRS or CSRRC tries to write a read-only CSR with rs1 which specifies
a register holding a zero value, an illegal instruction exception should be
raised.
Signed-off-by: Yu-Ming Chang <yumin686@andestech.com>
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <172100444279.18077.6893072378718059541-0@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new config for Smcntrpmf extension so that it can be enabled/
disabled from the qemu commandline.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-13-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The timer is setup function is invoked in both hpmcounter
write and mcountinhibit write path. If the OF bit set, the
LCOFI interrupt is disabled. There is no benefitting in
setting up the qemu timer until LCOFI is cleared to indicate
that interrupts can be fired again.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-12-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In case of programmable counters configured to count inst/cycles
we often end-up with counter not incrementing at all from kernel's
perspective.
For example:
- Kernel configures hpm3 to count instructions and sets hpmcounter
to -10000 and all modes except U mode are inhibited.
- In QEMU we configure a timer to expire after ~10000 instructions.
- Problem is, it's often the case that kernel might not even schedule
Umode task and we hit the timer callback in QEMU.
- In the timer callback we inject the interrupt into kernel, kernel
runs the handler and reads hpmcounter3 value.
- Given QEMU maintains individual counters to count for each privilege
mode, and given umode never ran, the umode counter didn't increment
and QEMU returns same value as was programmed by the kernel when
starting the counter.
- Kernel checks for overflow using previous and current value of the
counter and reprograms the counter given there wasn't an overflow
as per the counter value. (Which itself is a problem. We have QEMU
telling kernel that counter3 overflowed but the counter value
returned by QEMU doesn't seem to reflect that.).
This change makes sure that timer is reprogrammed from the handler
if the counter didn't overflow based on the counter value.
Second, this change makes sure that whenever the counter is read,
it's value is updated to reflect the latest count.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240711-smcntrpmf_v7-v8-11-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently we start timer counter from write_mhpmcounter path only
without checking for mcountinhibit bit. This changes adds mcountinhibit
check and also programs the counter from write_mcountinhibit as well.
When a counter is stopped using mcountinhibit we simply update
the value of the counter based on current host ticks and save
it for future reads.
We don't need to disable running timer as pmu_timer_trigger_irq
will discard the interrupt if the counter has been inhibited.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240711-smcntrpmf_v7-v8-10-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
scounteren/hcountern are also WARL registers similar to mcountern.
Only set the bits for the available counters during the write to
preserve the WARL behavior.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-9-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, if a counter monitoring cycle/instret is stopped via
mcountinhibit we just update the state while the value is saved
during the next read. This is not accurate as the read may happen
many cycles after the counter is stopped. Ideally, the read should
return the value saved when the counter is stopped.
Thus, save the value of the counter during the inhibit update
operation and return that value during the read if corresponding bit
in mcountihibit is set.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-8-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Privilege mode filtering can also be emulated for cycle/instret by
tracking host_ticks/icount during each privilege mode switch. This
patch implements that for both cycle/instret and mhpmcounters. The
first one requires Smcntrpmf while the other one requires Sscofpmf
to be enabled.
The cycle/instret are still computed using host ticks when icount
is not enabled. Otherwise, they are computed using raw icount which
is more accurate in icount mode.
Co-Developed-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-7-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the INH fields are set in mhpmevent uncoditionally
without checking if a particular priv mode is supported or not.
Suggested-by: Alistair Francis <alistair23@gmail.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-6-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QEMU only calculates dummy cycles and instructions, so there is no
actual means to stop the icount in QEMU. Hence this patch merely adds
the functionality of accessing the cfg registers, and cause no actual
effects on the counting of cycle and instret counters.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-5-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the definitions for ISA extension smcntrpmf.
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-4-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the properties for ISA extension smcntrpmf. Patches
implementing it will follow.
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-3-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
mhpmeventhX CSRs are available for RV32. The predicate function
should check that first before checking sscofpmf extension.
Fixes: 1466448345 ("target/riscv: Add sscofpmf extension support")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-2-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Combining riscv_cpu_set_virt_enabled() and riscv_cpu_set_mode()
functions. This is to make complete mode change information
available through a single function.
This allows to easily differentiate between HS->VS, VS->HS
and VS->VS transitions when executing state update codes.
For example: One use-case which inspired this change is
to update mode-specific instruction and cycle counters
which requires information of both prev mode and current
mode.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240711-smcntrpmf_v7-v8-1-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Two new regs added: ztso and zacas.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709085431.455541-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add disassembly support for these instructions from Zawrs:
* wrs.sto
* wrs.nto
Signed-off-by: Balaji Ravikumar <bravikumar@rivosinc.com>
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240705165316.127494-1-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Base on the riscv-privileged spec, vstvec substitutes for the usual stvec.
Therefore, the encoding of the MODE should also be restricted to 0 and 1.
Signed-off-by: Jiayi Li <lijiayi@eswincomputing.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20240701022553.1982-1-lijiayi@eswincomputing.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-12-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-11-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-10-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-9-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-8-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-7-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zama16b is the property that misaligned load/stores/atomics within
a naturally aligned 16-byte region are atomic.
According to the specification, Zama16b applies only to AMOs, loads
and stores defined in the base ISAs, and loads and stores of no more
than XLEN bits defined in the F, D, and Q extensions. Thus it should
not apply to zacas or RVC instructions.
For an instruction in that set, if all accessed bytes lie within 16B granule,
the instruction will not raise an exception for reasons of address alignment,
and the instruction will give rise to only one memory operation for the
purposes of RVWMO—i.e., it will execute atomically.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-6-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Although in QEMU disassemble, we usually lift compressed instruction
to an normal format when display the instruction name. For C.MOP.n,
it is more reasonable to directly display its compressed name, because
its behavior can be redefined by later extension.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Message-ID: <20240709113652.1239-5-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zcmop defines eight 16-bit MOP instructions named C.MOP.n, where n is
an odd integer between 1 and 15, inclusive. C.MOP.n is encoded in
the reserved encoding space corresponding to C.LUI xn, 0.
Unlike the MOPs defined in the Zimop extension, the C.MOP.n instructions
are defined to not write any register.
In current implementation, C.MOP.n only has an check function, without any
other more behavior.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Message-ID: <20240709113652.1239-4-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zimop extension defines an encoding space for 40 MOPs.The Zimop
extension defines 32 MOP instructions named MOP.R.n, where n is
an integer between 0 and 31, inclusive. The Zimop extension
additionally defines 8 MOP instructions named MOP.RR.n, where n
is an integer between 0 and 7.
These 40 MOPs initially are defined to simply write zero to x[rd],
but are designed to be redefined by later extensions to perform some
other action.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Message-ID: <20240709113652.1239-2-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* SEV: Don't allow automatic fallback to legacy KVM_SEV_INIT,
but also don't use it by default
* scsi: honor bootindex again for legacy drives
* hpet, utils, scsi, build, cpu: miscellaneous bugfixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaWoP0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqfggAg3jxUp6B8dFTEid5aV6qvT4M6nwD
TAYcAl5kRqTOklEmXiPCoA5PeS0rbr+5xzWLAKgkumjCVXbxMoYSr0xJHVuDwQWv
XunUm4kpxJBLKK3uTGAIW9A21thOaA5eAoLIcqu2smBMU953TBevMqA7T67h22rp
y8NnZWWdyQRH0RAaWsCBaHVkkf+DuHSG5LHMYhkdyxzno+UWkTADFppVhaDO78Ba
Egk49oMO+G6of4+dY//p1OtAkAf4bEHePKgxnbZePInJrkgHzr0TJWf9gERWFzdK
JiM0q6DeqopZm+vENxS+WOx7AyDzdN0qOrf6t9bziXMg0Rr2Z8bu01yBCQ==
=cZhV
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386/tcg: fixes for seg_helper.c
* SEV: Don't allow automatic fallback to legacy KVM_SEV_INIT,
but also don't use it by default
* scsi: honor bootindex again for legacy drives
* hpet, utils, scsi, build, cpu: miscellaneous bugfixes
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaWoP0UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqfggAg3jxUp6B8dFTEid5aV6qvT4M6nwD
# TAYcAl5kRqTOklEmXiPCoA5PeS0rbr+5xzWLAKgkumjCVXbxMoYSr0xJHVuDwQWv
# XunUm4kpxJBLKK3uTGAIW9A21thOaA5eAoLIcqu2smBMU953TBevMqA7T67h22rp
# y8NnZWWdyQRH0RAaWsCBaHVkkf+DuHSG5LHMYhkdyxzno+UWkTADFppVhaDO78Ba
# Egk49oMO+G6of4+dY//p1OtAkAf4bEHePKgxnbZePInJrkgHzr0TJWf9gERWFzdK
# JiM0q6DeqopZm+vENxS+WOx7AyDzdN0qOrf6t9bziXMg0Rr2Z8bu01yBCQ==
# =cZhV
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Jul 2024 02:34:05 AM AEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
target/i386/tcg: save current task state before loading new one
target/i386/tcg: use X86Access for TSS access
target/i386/tcg: check for correct busy state before switching to a new task
target/i386/tcg: Compute MMU index once
target/i386/tcg: Introduce x86_mmu_index_{kernel_,}pl
target/i386/tcg: Reorg push/pop within seg_helper.c
target/i386/tcg: use PUSHL/PUSHW for error code
target/i386/tcg: Allow IRET from user mode to user mode with SMAP
target/i386/tcg: Remove SEG_ADDL
target/i386/tcg: fix POP to memory in long mode
hpet: fix HPET_TN_SETVAL for high 32-bits of the comparator
hpet: fix clamping of period
docs: Update description of 'user=username' for '-run-with'
qemu/timer: Add host ticks function for LoongArch
scsi: fix regression and honor bootindex again for legacy drives
hw/scsi/lsi53c895a: bump instruction limit in scripts processing to fix regression
disas: Fix build against Capstone v6
cpu: Free queued CPU work
Revert "qemu-char: do not operate on sources from finalize callbacks"
i386/sev: Don't allow automatic fallback to legacy KVM_SEV*_INIT
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Addition of eMMC support is a long-term collaborative virtual work by:
- Cédric Le Goater
- Edgar E. Iglesias
- Francisco Iglesias
- Joel Stanley
- Luc Michel
- Philippe Mathieu-Daudé
- Sai Pavan Boddu
- Vincent Palatin
-----BEGIN PGP SIGNATURE-----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=m52p
-----END PGP SIGNATURE-----
Merge tag 'sdmmc-20240716' of https://github.com/philmd/qemu into staging
SD/MMC patches queue
Addition of eMMC support is a long-term collaborative virtual work by:
- Cédric Le Goater
- Edgar E. Iglesias
- Francisco Iglesias
- Joel Stanley
- Luc Michel
- Philippe Mathieu-Daudé
- Sai Pavan Boddu
- Vincent Palatin
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmaWvlEACgkQ4+MsLN6t
# wN7p7hAAj6JV3fIg1iKBR49asQVzU3/nYRIlWnp6QsLRGX+qwjMnuMzlvpinTtq4
# SJZobw1OJp/2LNaEGqAqNHqBpwAPibUnkei0pd1Y+v6Cyywo7X5Y1hRvQf46Ezqm
# u2FxsAfWc4cQs+sFrbNq/v7X2+R6VmChkA+EVc4cB0gwMOjvtg8RQObdhKr7Y6UX
# b9KvRDSNMH75ht39RD/smtcn/kprkkTQYo/ciBbVWdnBMiKuhN0qLXbKnZu9lMs4
# Ru29ypT+98pL1E/4YbgNcLGYXHjKrSIpD3+DEvmWe09LdG2+YMASv7do3iKfAYN5
# KdQ9BNZxYrpmeDAiyL521pODsgvU/wDDdbK0xUztPqcHhpYkvcfYWdzO8wr28Ib0
# wOEA0+xzveeD+1ZKjilbZ6tKzsRrKgv1O8j1T8rXab2/3mjrW2R5G/5y4bpM8E4h
# KuqGwC2YjWsJi3CwRL5Cvu5YBsiyYF7mk0zTKK2qwO87B7Pa0PJ3Y9x0xIWm4blp
# RoZ1SaCChH3M1hKK3jDjrIutXrZG8CzHpe17QjTQeUxo+/wX3VfDYbXasTe1orFu
# +JkUBU+xZ6m1+dWAa22H5KbeY8wd99p6w+ChnVmS15WqVK8i2e4gfTsKGh7Idt3t
# Vf4CaCD/2vRtKo4AN+YNDUg1DWV89zXRbnkR5oWUWG3Fda5Qo3k=
# =m52p
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Jul 2024 04:39:13 AM AEST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'sdmmc-20240716' of https://github.com/philmd/qemu:
hw/sd/sdcard: Support boot area in emmc image
hw/sd/sdcard: Add mmc SWITCH function support (CMD6)
hw/sd/sdcard: Add eMMC 'boot-partition-size' property
hw/sd/sdcard: Add emmc_cmd_SEND_EXT_CSD handler (CMD8)
hw/sd/sdcard: Implement eMMC sleep state (CMD5)
hw/sd/sdcard: Add emmc_cmd_PROGRAM_CID handler (CMD26)
hw/sd/sdcard: Fix SET_BLOCK_COUNT command argument on eMMC (CMD23)
hw/sd/sdcard: Add emmc_cmd_SET_RELATIVE_ADDR handler (CMD3)
hw/sd/sdcard: Register unimplemented command handlers
hw/sd/sdcard: Register generic command handlers
hw/sd/sdcard: Basis for eMMC support
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
switch operation in mmc cards, updated the ext_csd register to
request changes in card operations. Here we implement similar
sequence but requests are mostly dummy and make no change.
Implement SWITCH_ERROR if the write operation offset goes beyond
length of ext_csd.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMD: Convert to SDProto handlers, add trace events]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-11-philmd@linaro.org>
Avoid hardcoding 1MiB boot size in EXT_CSD_BOOT_MULT,
expose it as 'boot-partition-size' QOM property.
By default, do not use any size. The board is responsible
to set the boot partition size property.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-10-philmd@linaro.org>
The parameters mimick a real 4GB eMMC, but it can be set to various
sizes.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
EXT_CSD values from Vincent's patch simplivied for Spec v4.3:
- Remove deprecated keys:
. EXT_CSD_SEC_ERASE_MULT
. EXT_CSD_SEC_TRIM_MULT
- Set some keys to not defined / implemented:
. EXT_CSD_HPI_FEATURES
. EXT_CSD_BKOPS_SUPPORT
. EXT_CSD_SEC_FEATURE_SUPPORT
. EXT_CSD_ERASE_TIMEOUT_MULT
. EXT_CSD_PART_SWITCH_TIME
. EXT_CSD_OUT_OF_INTERRUPT_TIME
- Simplify:
. EXT_CSD_ACC_SIZE (6 -> 1)
16KB of super_page_size -> 512B (BDRV_SECTOR_SIZE)
. EXT_CSD_HC_ERASE_GRP_SIZE (4 -> 1)
. EXT_CSD_HC_WP_GRP_SIZE (4 -> 1)
. EXT_CSD_S_C_VCC[Q] (8 -> 1)
. EXT_CSD_S_A_TIMEOUT (17 -> 1)
. EXT_CSD_CARD_TYPE (7 -> 3)
Dual data rate -> High-Speed mode
- Update:
. EXT_CSD_CARD_TYPE (7 -> 3)
High-Speed MultiMediaCard @ 26MHz & 52MHz
. Performances (0xa -> 0x46)
Class B at 3MB/s. -> Class J at 21MB/s
. EXT_CSD_REV (5 -> 3)
Rev 1.5 (spec v4.41) -> Rev 1.3 (spec v4.3)
- Use load/store API to set EXT_CSD_SEC_CNT
- Remove R/W keys, normally zeroed at reset
. EXT_CSD_BOOT_INFO
Migrate the Modes segment (192 lower bytes) but not the
full EXT_CSD register, see Spec v4.3, chapter 8.4
"Extended CSD register":
The Extended CSD register defines the card properties
and selected modes. It is 512 bytes long. The most
significant 320 bytes are the Properties segment, which
defines the card capabilities and cannot be modified by
the host. The lower 192 bytes are the Modes segment,
which defines the configuration the card is working in.
These modes can be changed by the host by means of the
SWITCH command.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-9-philmd@linaro.org>
The JEDEC standards specifies a sleep state where the eMMC won't
answer any command appart from RESET and WAKEUP and go to low power
state. Implement this state and the corresponding command number 5.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-8-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-Id: <20240712162719.88165-7-philmd@linaro.org>
The number of blocks is defined in the lower bits [15:0].
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-6-philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-5-philmd@linaro.org>
Per the spec v4.3 these commands are mandatory,
but we don't implement them.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-4-philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-3-philmd@linaro.org>
Since eMMC are soldered on boards, it is not user-creatable.
RCA register is initialized to 0x0001, per spec v4.3,
chapter 8.5 "RCA register":
The default value of the RCA register is 0x0001.
The value 0x0000 is reserved to set all cards into
the Stand-by State with CMD7.
The CSD register is very similar to SD one, except
the version announced is v4.3.
eMMC CID register is slightly different from SD:
- One extra PNM (5 -> 6)
- MDT is only 1 byte (2 -> 1).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-2-philmd@linaro.org>
When ram_block_discard_require() fails, errno is passed to error_setg_errno().
It's a stale value or 0 which is unrelated to ram_block_discard_require().
As ram_block_discard_require() already returns -EBUSY in failure case,
use it as errno for error_setg_errno().
Fixes: 852f0048f3 ("make guest_memfd require uncoordinated discard")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240716064213.290696-1-zhenzhong.duan@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Don't pass NULL to module_object_class_by_name(), when the interface is
unavailable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240715114420.2062870-1-marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Remove dpy_cursor_define_supported() as it brings no benefit today and
it has a few inherent problems.
All graphical displays except egl-headless support cursor composition
without DMA-BUF, and egl-headless is meant to be used in conjunction
with another graphical display, so dpy_cursor_define_supported()
always returns true and meaningless.
Even if we add a new display without cursor composition in the future,
dpy_cursor_define_supported() will be problematic as a cursor display
fix for it because some display devices like virtio-gpu cannot tell the
lack of cursor composition capability to the guest and are unable to
utilize the value the function returns. Therefore, all non-headless
graphical displays must actually implement cursor composition for
correct cursor display.
Another problem with dpy_cursor_define_supported() is that it returns
true even if only some of the display listeners support cursor
composition, which is wrong unless all display listeners that lack
cursor composition is headless.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240715-cursor-v3-4-afa5b9492dbf@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add accelerated cursor composition to ui/cocoa. This does not only
improve performance for display devices that exposes the capability to
the guest according to dpy_cursor_define_supported(), but fixes the
cursor display for devices that unconditionally expects the availability
of the capability (e.g., virtio-gpu).
The common pattern to implement accelerated cursor composition is to
replace the cursor and warp it so that the replaced cursor is shown at
the correct position on the guest display for relative pointer devices.
Unfortunately, ui/cocoa cannot do the same because warping the cursor
position interfers with the mouse input so it uses CALayer instead;
although it is not specialized for cursor composition, it still can
compose images with hardware acceleration.
Co-authored-by: Phil Dennis-Jordan <phil@philjordan.eu>
Tested-by: Phil Dennis-Jordan <phil@philjordan.eu>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240715-cursor-v3-3-afa5b9492dbf@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
CGImageCreate | Apple Developer Documentation
https://developer.apple.com/documentation/coregraphics/1455149-cgimagecreate
> The color space is retained; on return, you may safely release it.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240715-cursor-v3-1-afa5b9492dbf@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The transfer size check was originally added to prevent consecutive DMA TI
commands from causing an assert() due to an existing SCSI request being in
progress, but since the last set of updates [*] this is no longer required.
Remove the transfer size check from DMA DATA IN and DATA OUT transfers so
that issuing a DMA TI command when there is no data left to transfer does
not cause an assert() due to an existing SCSI request being in progress.
[*] See commits f3ace75be8..78d68f312a
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2415
Message-ID: <20240713224249.468084-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
