The fbstp implementation fails to check for out-of-range and invalid
values, instead just taking the result of conversion to int64_t and
storing its sign and low 18 decimal digits. Fix this by checking for
an out-of-range result (invalid conversions always result in INT64_MAX
or INT64_MIN from the softfloat code, which are large enough to be
considered as out-of-range by this code) and storing the packed BCD
indefinite encoding in that case.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132351110.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fbstp implementation stores +0 when the rounded result should be
-0 because it compares an integer value with 0 to determine the sign.
Fix this by checking the sign bit of the operand instead.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132350230.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fxam implementation does not check for invalid encodings, instead
treating them like NaN or normal numbers depending on the exponent.
Fix it to check that the high bit of the significand is set before
treating an encoding as NaN or normal, thus resulting in correct
handling (all of C0, C2 and C3 cleared) for invalid encodings.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132349311.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementations of the fldl2t, fldl2e, fldpi, fldlg2 and fldln2
instructions load fixed constants independent of the rounding mode.
Fix them to load a value correctly rounded for the current rounding
mode (but always rounded to 64-bit precision independent of the
precision control, and without setting "inexact") as specified.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2005132348310.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation uses floatx80_scalbn for the final scaling
operation. floatx80_scalbn ends up rounding the result using the
dynamic rounding precision configured for the FPU. But only a limited
set of x87 floating-point instructions are supposed to respect the
dynamic rounding precision, and fscale is not in that set. Fix the
implementation to save and restore the rounding precision around the
call to floatx80_scalbn.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070045430.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation passes infinite exponents through to generic
code that rounds the exponent to a 32-bit integer before using
floatx80_scalbn. In round-to-nearest mode, and ignoring exceptions,
this works in many cases. But it fails to handle the special cases of
scaling 0 by a +Inf exponent or an infinity by a -Inf exponent, which
should produce a NaN, and because it produces an inexact result for
finite nonzero numbers being scaled, the result is sometimes incorrect
in other rounding modes. Add appropriate handling of infinite
exponents to produce a NaN or an appropriately signed exact zero or
infinity as a result.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070045010.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation does not check for invalid encodings in the
exponent operand, thus treating them like INT_MIN (the value returned
for invalid encodings by floatx80_to_int32_round_to_zero). Fix it to
treat them similarly to signaling NaN exponents, thus generating a
quiet NaN result.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070044190.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation of the fscale instruction returns a NaN exponent
unchanged. Fix it to return a quiet NaN when the provided exponent is
a signaling NaN.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070043330.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation of the fxtract instruction treats all nonzero
operands as normal numbers, so yielding incorrect results for invalid
formats, infinities, NaNs and subnormal and pseudo-denormal operands.
Implement appropriate handling of all those cases.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <alpine.DEB.2.21.2005070042360.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need "qom/object.h" to call object_ref()/object_unref(),
and to test the TYPE_DUMMY.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200504115656.6045-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Read the --extra-files in binary mode to avoid encoding errors.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The docker.py command line is subtly different from docker and podman's,
in that the tag and Dockerfile are passed via positional arguments.
Remove this gratuitous difference and just parse -f and -t.
-f was previously used by --extra-files, only keep the long option.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the next commit we are going to remove some objects from the
util-obj-y variable (objects which are not used by user-mode,
when configured with --disable-system).
Then some system-mode tests are going to fail, due to the missing
objects:
$ make check-unit -k
LINK tests/test-iov
/usr/bin/ld: tests/test-iov.o: in function `iov_from_buf':
include/qemu/iov.h:49: undefined reference to `iov_from_buf_full'
make: *** [rules.mak:124: tests/test-iov] Error 1
LINK tests/test-timed-average
/usr/bin/ld: tests/test-timed-average.o: in function `account':
tests/test-timed-average.c:27: undefined reference to `timed_average_account'
make: *** [rules.mak:124: tests/test-timed-average] Error 1
LINK tests/test-util-filemonitor
/usr/bin/ld: tests/test-util-filemonitor.o: in function `qemu_file_monitor_test_event_loop':
tests/test-util-filemonitor.c:83: undefined reference to `main_loop_wait'
make: *** [rules.mak:124: tests/test-util-filemonitor] Error 1
LINK tests/test-util-sockets
/usr/bin/ld: tests/test-util-sockets.o: in function `test_socket_fd_pass_name_good':
tests/test-util-sockets.c:91: undefined reference to `socket_connect'
make: *** [rules.mak:124: tests/test-util-sockets] Error 1
LINK tests/test-base64
/usr/bin/ld: tests/test-base64.o: in function `test_base64_good':
tests/test-base64.c:35: undefined reference to `qbase64_decode'
collect2: error: ld returned 1 exit status
make: *** [rules.mak:124: tests/test-base64] Error 1
LINK tests/test-bufferiszero
/usr/bin/ld: tests/test-bufferiszero.o: in function `test_1':
tests/test-bufferiszero.c:31: undefined reference to `buffer_is_zero'
make: *** [rules.mak:124: tests/test-bufferiszero] Error 1
make: Target 'check-unit' not remade because of errors.
Instead, restrict these tests to system-mode, by using the
$(CONFIG_SOFTMMU) variable.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-5-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add a check for functional dwc-hsotg (dwc2) USB host emulation to
the Raspi 2 acceptance test
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org>
Message-id: 20200520235349.21215-8-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As described by Edgar here:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg605124.html
we can use the Ubuntu kernel for testing the xlnx-versal-virt machine.
So let's add a boot test for this now.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200525141237.15243-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without this, the time since the last main-loop keeps increasing, as the
fuzzer runs. The forked children need to handle all the "past-due"
timers, slowing them down, over time. With this change, the
parent/fork-server process runs the main-loop, while waiting on the
child, ensuring that the timer events do not pile up, over time.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200512030133.29896-5-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Previously, we relied on "FuzzerTracePC*(.bss*)" to place libfuzzer's
fuzzer::TPC object into our contiguous shared-memory region. This does
not work for some libfuzzer builds, so this addition identifies the
region by its mangled name: *(.bss._ZN6fuzzer3TPCE);
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200512030133.29896-4-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200512030133.29896-3-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows us to keep pc-bios in executable_dir/pc-bios, rather than
executable_dir/../pc-bios, which is incompatible with oss-fuzz' file
structure.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200512030133.29896-2-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This started off as Andreas Färber's implementation from
March 2015, but after feedback from Paolo and Markus it morphed into
using the json output which handles structs reasonably.
Use with qom-list to find the members of an object.
(qemu) qom-get /backend/console[0]/device/vga.rom[0] size
65536
(qemu) qom-get /machine smm
"auto"
(qemu) qom-get /machine rtc-time
{
"tm_year": 120,
"tm_sec": 51,
"tm_hour": 9,
"tm_min": 50,
"tm_mon": 4,
"tm_mday": 20
}
(qemu) qom-get /machine frob
Error: Property '.frob' not found
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200520151108.160598-2-dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The description of "make check" is out-of-date, so fix it by adding
block and softfloat.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1588674291-6486-1-git-send-email-chenhc@lemote.com>
This patch moves image downloading functions to the separate class to allow
reusing them from record/replay tests.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <159073593167.20809.17582679291556188984.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This patch splits code in BootLinuxConsole class into two different
classes to allow reusing it by record/replay tests.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <159073588490.20809.13942096070255577558.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Console interaction in avocado scripts was possible only with single
default VM.
This patch modifies the function parameters to allow passing a specific
VM as a parameter to interact with it.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <159073587933.20809.5122618715976660635.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When the source finishes migration the destination will still be
receiving the data sent by the source, so it might not have quite
finished yet, so won't quite have reached 'completed'.
This lead to occasional asserts in the next few checks.
After the source has finished, check the destination as well.
(We can't just switch to checking the destination, because it doesn't
give a status until it has started receiving the migration).
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200528112404.121972-1-dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200512103238.7078-7-philmd@redhat.com>
This allows for waiting for completion of arbitrary commands.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200529203458.1038-7-robert.foley@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Added a new special variable QEMU_LOCAL=1, which
will indicate to take the QEMU binary from the current
build.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200529203458.1038-6-robert.foley@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This helps debug issues that occur during the boot sequence.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200529203458.1038-5-robert.foley@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We guarantee 3.5+ everywhere; remove more dead checks. In general, try
to avoid using version checks and instead prefer to attempt behavior
when possible.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514035230.25756-1-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add a new test covering the 'qemu-img bitmap' subcommand, as well as
'qemu-img convert --bitmaps', both added in recent patches.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200521192137.1120211-6-eblake@redhat.com>
It's useful to know how much space can be occupied by qcow2 persistent
bitmaps, even though such metadata is unrelated to the guest-visible
data. Report this value as an additional QMP field, present when
measuring an existing image and output format that both support
bitmaps. Update iotest 178 and 190 to updated output, as well as new
coverage in 190 demonstrating non-zero values made possible with the
recently-added qemu-img bitmap command (see 3b51ab4b).
The new 'bitmaps size:' field is displayed automatically as part of
'qemu-img measure' any time it is present in QMP (that is, any time
both the source image being measured and destination format support
bitmaps, even if the measurement is 0 because there are no bitmaps
present). If the field is absent, it means that no bitmaps can be
copied (source, destination, or both lack bitmaps, including when
measuring based on size rather than on a source image). This behavior
is compatible with an upcoming patch adding 'qemu-img convert
--bitmaps': that command will fail in the same situations where this
patch omits the field.
The addition of a new field demonstrates why we should always
zero-initialize qapi C structs; while the qcow2 driver still fully
populates all fields, the raw and crypto drivers had to be tweaked to
avoid uninitialized data.
Consideration was also given towards having a 'qemu-img measure
--bitmaps' which errors out when bitmaps are not possible, and
otherwise sums the bitmaps into the existing allocation totals rather
than displaying as a separate field, as a potential convenience
factor. But this was ultimately decided to be more complexity than
necessary when the QMP interface was sufficient enough with bitmaps
remaining a separate field.
See also: https://bugzilla.redhat.com/1779904
Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200521192137.1120211-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
A recent change to qemu-img changed expected error message output, but
178 takes long enough to execute that it does not get run by 'make
check' or './check -g quick'.
Fixes: 43d589b074
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200521192137.1120211-2-eblake@redhat.com>
Test that dirty bitmap migration works when we deal with mirror.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200521220648.3255-5-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Based on the original testcase by Nikolay Igotti.
Message-ID: <CAEme+7GLKg_dNsHizzTKDymX9HyD+Ph2iZ=WKhOw2XG+zhViXg@mail.gmail.com>
Signed-off-by: Nikolay Igotti <igotti@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200520140541.30256-15-alex.bennee@linaro.org>
As we enable newer features that we want to test on arm64 targets we
need newer compilers. Split off a new debian-arm64-test-cross image
which we can use to build these new tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-11-alex.bennee@linaro.org>
We won't use this for building QEMU but we do need newer GCC's and
binutils for building some of our test cases.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-10-alex.bennee@linaro.org>
While we may gamely give the right information it can still confuse
the wide range of GDBs out there. For example ppc64abi32-linux-user
reports:
warning: Selected architecture powerpc:common is not compatible with reported target architecture powerpc:common64
warning: Architecture rejected target-supplied description
but still connects. Add a test for a 0 pc and exit early if that is
the case. This may actually be a bug we need to fix?
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-8-alex.bennee@linaro.org>
Split the float conversion tests into separate groups and audit the
tests to check what is still broken. I was able to enable a bunch of
tests that had been missed before:
all the float to float conversions
ui32_to_extF80
ui64_to_extF80
extF80_to_ui32
extF80_to_ui32_r_minMag
extF80_to_ui64
extF80_to_ui64_r_minMag
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-7-alex.bennee@linaro.org>
These have been fixed now so we no longer need a special version of
the le_quiet rule to skip the test.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-6-alex.bennee@linaro.org>
I'm not sure when this broke but we should use EXTRA_RUNS for
"virtual" tests which are not generated from the binary names.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-5-alex.bennee@linaro.org>
If we have an alternative to genisoimage we really need to tell the
script about it as well so it can use it. It will still default to
genisoimage in case it is run outside our build machinery.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200519132259.405-3-robert.foley@linaro.org>
