FEAT_CMOW introduces support for controlling cache maintenance
instructions executed in EL0/1 and is mandatory from Armv8.8.
On real hardware, the main use for this feature is to prevent processes
from invalidating or flushing cache lines for addresses they only have
read permission, which can impact the performance of other processes.
QEMU implements all cache instructions as NOPs, and, according to rule
[1], which states that generating any Permission fault when a cache
instruction is implemented as a NOP is implementation-defined, no
Permission fault is generated for any cache instruction when it lacks
read and write permissions.
QEMU does not model any cache topology, so the PoU and PoC are before
any cache, and rules [2] apply. These rules state that generating any
MMU fault for cache instructions in this topology is also
implementation-defined. Therefore, for FEAT_CMOW, we do not generate any
MMU faults either, instead, we only advertise it in the feature
register.
[1] Rule R_HGLYG of section D8.14.3, Arm ARM K.a.
[2] Rules R_MZTNR and R_DNZYL of section D8.14.3, Arm ARM K.a.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241104142606.941638-1-gustavo.romero@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bits on IRQ lowering
* Make PLIC zeroth priority register read-only
* Set vtype.vill on CPU reset
* Check and update APLIC pending when write sourcecfg
* Avoid dropping charecters with HTIF
* Apply FIFO backpressure to guests using SiFive UART
* Support for control flow integrity extensions
* Support for the IOMMU with the virt machine
* set 'aia_mode' to default in error path
* clarify how 'riscv-aia' default works
-----BEGIN PGP SIGNATURE-----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=rPaa
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.2
* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bits on IRQ lowering
* Make PLIC zeroth priority register read-only
* Set vtype.vill on CPU reset
* Check and update APLIC pending when write sourcecfg
* Avoid dropping charecters with HTIF
* Apply FIFO backpressure to guests using SiFive UART
* Support for control flow integrity extensions
* Support for the IOMMU with the virt machine
* set 'aia_mode' to default in error path
* clarify how 'riscv-aia' default works
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmci/tQACgkQr3yVEwxT
# gBNPAQ//dZKjjJm4Sh+UFdUslivBJYtL1rl2UUG2UqiNn/UoYh/vcHoSArljHTjt
# 8riEStnaQqXziOpMIJjIMLJ4KoiIk2SMvjNfFtcmPiPZEDEpjsTxfUxBFsBee+fI
# 4KNQKKFeljq4pa+VzVvXEqzCNJIzCThFXTZhZmer00M91HPA8ZQIHpv2JL1sWlgZ
# /HW24XEDFLGc/JsR55fxpPftlAqP+BfOrqMmbWy7x2Y+G8WI05hM2zTP/W8pnIz3
# z0GCRYSBlADtrp+3RqzTwQfK5pXoFc0iDktWVYlhoXaeEmOwo8IYxTjrvBGhnBq+
# ySX1DzTa23QmOIxSYYvCRuOxyOK9ziNn+EQ9FiFBt1h1o251CYMil1bwmYXMCMNJ
# rZwF1HfUx0g2GQW1ZOqh1eeyLO29JiOdV3hxlDO7X4bbISNgU6il5MXmnvf0/XVW
# Af3YhALeeDbHgHL1iVfjafzaviQc9+YrEX13eX6N2AjcgE5a3F7XNmGfFpFJ+mfQ
# CPgiwVBXat6UpBUGAt14UM+6wzp+crSgQR5IEGth+mKMKdkWoykvo7A2oHdu39zn
# 2cdzsshg2qcLLUPTFy06OOTXX382kCWXuykhHOjZ4uu2SJJ7R0W3PlYV8HSde2Vu
# Rj+89ZlUSICJNXXweQB39r87hNbtRuDIO22V0B9XrApQbJj6/yE=
# =rPaa
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Oct 2024 03:51:48 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu: (50 commits)
target/riscv: Fix vcompress with rvv_ta_all_1s
target/riscv/kvm: clarify how 'riscv-aia' default works
target/riscv/kvm: set 'aia_mode' to default in error path
docs/specs: add riscv-iommu
qtest/riscv-iommu-test: add init queues test
hw/riscv/riscv-iommu: add DBG support
hw/riscv/riscv-iommu: add ATS support
hw/riscv/riscv-iommu: add Address Translation Cache (IOATC)
test/qtest: add riscv-iommu-pci tests
hw/riscv/virt.c: support for RISC-V IOMMU PCIDevice hotplug
hw/riscv: add riscv-iommu-pci reference device
pci-ids.rst: add Red Hat pci-id for RISC-V IOMMU device
hw/riscv: add RISC-V IOMMU base emulation
hw/riscv: add riscv-iommu-bits.h
exec/memtxattr: add process identifier to the transaction attributes
target/riscv: Expose zicfiss extension as a cpu property
disas/riscv: enable disassembly for compressed sspush/sspopchk
disas/riscv: enable disassembly for zicfiss instructions
target/riscv: compressed encodings for sspush and sspopchk
target/riscv: implement zicfiss instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a simple guideline to use the existing RISC-V IOMMU support we just
added.
This doc will be updated once we add the riscv-iommu-sys device.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We are currently lacking a declared maintainer for the sub-system so
while we look for one I'm merging after testing locally.
- convert some fprintfs to proper trace events
- move timers used by GL devices into GL structures
- handle virtio_gpu_virgl_init() failure better
- implement unrealize for GL devices
- use virgl version numbering to gate features
- support context-init feature
- don't require udmabuf for virgl only
- add virgl resource tracker
- allow command submission to be suspended
- handle resource blob commands
- dynamically handle capabilit sets
- add venus context support for passing vulkan
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmcg0FsACgkQ+9DbCVqe
KkT86Qf/RtQuzIl+y60BeXdBLqjpLbS2WY3pk49068o+ZyUccNhMLzfL/Pd2Iz7t
nW/4kI0lkobsPeKGLJchJQzWgEbFTD3KvYz9r8Ywugoy6FquMUptkSHcH8ggKZwT
oJ0wT2jNS7UjgcJjnlQ8WaP/EH8qPI/0+e6W6RlcTE1sIxpJ6zHfMnHi4RUayGz7
P9JYbOrMO2bHWBrdfQXIJaUVSLvy44j9V4u6OCCLPfDvr5RwzPXFv1YmTRpW14Zu
P+iuxdUjRuhUQDMSKIbrzfHOFLg4iUchMgyd2pnVFjU6zOyA+yKWDxfPO0K0AbHh
FddMYgP5K7IrgaUc6mI0w2/RCuLJvw==
=mSAL
-----END PGP SIGNATURE-----
Merge tag 'pull-virtio-gpu-vulkan-291024-1' of https://gitlab.com/stsquad/qemu into staging
virtio-gpu: add venus/vulkan capability
We are currently lacking a declared maintainer for the sub-system so
while we look for one I'm merging after testing locally.
- convert some fprintfs to proper trace events
- move timers used by GL devices into GL structures
- handle virtio_gpu_virgl_init() failure better
- implement unrealize for GL devices
- use virgl version numbering to gate features
- support context-init feature
- don't require udmabuf for virgl only
- add virgl resource tracker
- allow command submission to be suspended
- handle resource blob commands
- dynamically handle capabilit sets
- add venus context support for passing vulkan
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmcg0FsACgkQ+9DbCVqe
# KkT86Qf/RtQuzIl+y60BeXdBLqjpLbS2WY3pk49068o+ZyUccNhMLzfL/Pd2Iz7t
# nW/4kI0lkobsPeKGLJchJQzWgEbFTD3KvYz9r8Ywugoy6FquMUptkSHcH8ggKZwT
# oJ0wT2jNS7UjgcJjnlQ8WaP/EH8qPI/0+e6W6RlcTE1sIxpJ6zHfMnHi4RUayGz7
# P9JYbOrMO2bHWBrdfQXIJaUVSLvy44j9V4u6OCCLPfDvr5RwzPXFv1YmTRpW14Zu
# P+iuxdUjRuhUQDMSKIbrzfHOFLg4iUchMgyd2pnVFjU6zOyA+yKWDxfPO0K0AbHh
# FddMYgP5K7IrgaUc6mI0w2/RCuLJvw==
# =mSAL
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 29 Oct 2024 12:08:59 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-virtio-gpu-vulkan-291024-1' of https://gitlab.com/stsquad/qemu:
virtio-gpu: Support Venus context
virtio-gpu: Register capsets dynamically
virtio-gpu: Handle resource blob commands
virtio-gpu: Support suspension of commands processing
virtio-gpu: Add virgl resource management
virtio-gpu: Don't require udmabuf when blobs and virgl are enabled
virtio-gpu: Support context-init feature with virglrenderer
virtio-gpu: Use pkgconfig version to decide which virgl features are available
virtio-gpu: Unrealize GL device
virtio-gpu: Handle virtio_gpu_virgl_init() failure
virtio-gpu: Move print_stats timer to VirtIOGPUGL
virtio-gpu: Move fence_poll timer to VirtIOGPUGL
virtio-gpu: Use trace events for tracking number of in-flight fences
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We now have at least placeholder documentation for every Arm board,
so we can remove the apologetic note that says that there are
undocumented ones which you can only find out about via the
``--machine help`` option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20241018141332.942844-8-peter.maydell@linaro.org
Add placeholder docs for the mcimx6ul-evk and mcimx7d-sabre boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20241018141332.942844-7-peter.maydell@linaro.org
Add a placeholder doc for the xlnx-zcu102 board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20241018141332.942844-6-peter.maydell@linaro.org
Add a placeholder doc for the exynos4 boards nuri and smdkc210.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20241018141332.942844-5-peter.maydell@linaro.org
The fby35 machine is not implemented in hw/arm/aspeed.c,
but its documentation is currently stuck at the end of aspeed.rst,
formatted in a way that it gets its own heading in the top-level
list of boards in target-arm.html.
We don't have any other boards that we document like this; split it
out into its own rst file. This improves consistency with other
board docs and means we can have the entry in the target-arm
list be in the correct alphabetical order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20241018141332.942844-4-peter.maydell@linaro.org
We have two Arm board doc files which both use '*-bmc' in their
documentation title. The result is that when you read the
table of contents in system/target-arm.html you don't know
which boards are covered by which file.
Expand out the board names entirely in the document titles.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20241018141332.942844-3-peter.maydell@linaro.org
List the olimex-stm32-h405 board in the document title, so that the
board name appears in the table of contents in system/target-arm.rst.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20241018141332.942844-2-peter.maydell@linaro.org
The example of how to do vCPU hotplug and hot-unlpug in the
cpu-hotplug documentation no longer works, because the way we
allocate socket-id and core-id to CPUs by default has changed at some
point. The output also no longer matches what current QEMU produces
in some more cosmetic ways.
Update the example to match current QEMU. The differences are:
* the second CPU is now socket-id=0 core-id=1,
not socket-id=1 core-id=0
* the order of fields in QMP responses is now in alphabetical order
* the "arch" member is no longer present in the query-cpus-fast
output (it was removed in QEMU 6.0)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20241010131800.3210161-1-peter.maydell@linaro.org
Message-id: 20240819144303.37852-1-peter.maydell@linaro.org
Request Venus when initializing VirGL and if venus=true flag is set for
virtio-gpu-gl device.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-14-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Change all related docs and tests to use the new 'reconnect-ms' option
instead of the now deprecated 'reconnect'.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Update docs to show that s390x PC BIOS can support more than one boot device.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-19-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove the information about the separate s390-netboot.img from
the documentation.
Co-authored by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20241020012953.1380075-7-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While hyperv.rst already has all currently implemented Hyper-V
enlightenments documented, it may be unclear what is the recommended set to
achieve the best result. Add the corresponding section to the doc.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240917160051.2637594-5-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows with Hyper-V role enabled doesn't boot with 'hv-passthrough' when
no debugger is configured, this significantly limits the usefulness of the
feature as there's no support for subtracting Hyper-V features from CPU
flags at this moment (e.g. "-cpu host,hv-passthrough,-hv-syndbg" does not
work). While this is also theoretically fixable, 'hv-syndbg' is likely
very special and unneeded in the default set. Genuine Hyper-V doesn't seem
to enable it either.
Introduce 'skip_passthrough' flag to 'kvm_hyperv_properties' and use it as
one-off to skip 'hv-syndbg' when enabling features in 'hv-passthrough'
mode. Note, "-cpu host,hv-passthrough,hv-syndbg" can still be used if
needed.
As both 'hv-passthrough' and 'hv-syndbg' are debug features, the change
should not have any effect on production environments.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240917160051.2637594-3-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Allwinner A10 SPI controller is added to the Allwinner A10
description, so it is available when Cubieboard is emulated.
Update the documentation for Cubieboard to indicate SPI availability.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Message-id: 20241001221349.8319-3-strahinja.p.jankovic@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the reset and clock controller device to the stm32f405 SoC.
Signed-off-by: Roman Cardenas Rodriguez <rcardenas.rod@gmail.com>
[PMM: tweak commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the 'n800' and 'n810' machine types, which modelled
Nokia internet tablets. These were deprecated in 9.0 and
so we can remove them for 9.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-26-peter.maydell@linaro.org
[PMM: added removal of arm-n800-machine.c post-review]
The 'mainstone' machine has been deprecated since 9.0, and
so we can remove it for the 9.2 release.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-11-peter.maydell@linaro.org
The connex and verdex machines have been deprecated since
9.0 and so can be removed for the 9.2 release.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-10-peter.maydell@linaro.org
The 'cheetah' machine has been deprecated since 9.0, so we can
remove it for the 9.2 release.
(tsc210x.c is also used by nseries, so move its MAINTAINER file
line there; the nseries boards are also about to be removed.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-9-peter.maydell@linaro.org
The Sharp XScale-based PDA board models akita, borzoi, spitz,
terrier, and tosa were all deprecated in 9.0, so our deprecation
cycle permits removing them for the 9.2 release.
Remove the source files for the board models themselves, and their
documentation. There were no tests for these boards.
We will move the text describing the dropped boards from
deprecated.rst to removed-features.rst when we've cleaned up all the
boards it lists. Device models used only by removed board models
will be removed in separate commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-2-peter.maydell@linaro.org
PowerMac is spelled as PowerMAC (Media Access Control) in some places.
This is misleading.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2297
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Added loongarch UEFI BIOS support to compiled scripts.
UEFI code images require 16M alignment, flash images require
16M alignment, under the loongarch architecture.This is agreed
upon when the firmware is loaded in QEMU under Loongarch.
The naming of UEFI under loongarch refers to the x86 and arm naming methods,
and the UEFI image names in x86 and arm are:
edk2-i386-code.fd
edk2-i386-vars.fd
edk2-arm-code.fd
edk2-arm-vars.fd
So on loongarch, we named it:
edk2-loongarch64-code.fd
edk2-loongarch64-vars.fd
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Message-ID: <20240724022245.1317884-1-lixianglai@loongson.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that we've implemented the required behaviour for FEAT_EBF16, we
can enable it for the "max" CPU type, list it in our documentation,
and delete a TODO comment about it being missing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
pci: Initial support for SPDM Responders
cxl: Add support for scan media, feature commands, device patrol scrub
control, DDR5 ECS control, firmware updates
virtio: in-order support
virtio-net: support for SR-IOV emulation (note: known issues on s390,
might get reverted if not fixed)
smbios: memory device size is now configurable per Machine
cpu: architecture agnostic code to support vCPU Hotplug
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmae9l8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp8fYH/impBH9nViO/WK48io4mLSkl0EUL8Y/xrMvH
zKFCKaXq8D96VTt1Z4EGKYgwG0voBKZaCEKYU/0ARGnSlSwxINQ8ROCnBWMfn2sx
yQt08EXVMznNLtXjc6U5zCoCi6SaV85GH40No3MUFXBQt29ZSlFqO/fuHGZHYBwS
wuVKvTjjNF4EsGt3rS4Qsv6BwZWMM+dE6yXpKWk68kR8IGp+6QGxkMbWt9uEX2Md
VuemKVnFYw0XGCGy5K+ZkvoA2DGpEw0QxVSOMs8CI55Oc9SkTKz5fUSzXXGo1if+
M1CTjOPJu6pMym6gy6XpFa8/QioDA/jE2vBQvfJ64TwhJDV159s=
=k8e9
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci,pc: features,fixes
pci: Initial support for SPDM Responders
cxl: Add support for scan media, feature commands, device patrol scrub
control, DDR5 ECS control, firmware updates
virtio: in-order support
virtio-net: support for SR-IOV emulation (note: known issues on s390,
might get reverted if not fixed)
smbios: memory device size is now configurable per Machine
cpu: architecture agnostic code to support vCPU Hotplug
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmae9l8PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp8fYH/impBH9nViO/WK48io4mLSkl0EUL8Y/xrMvH
# zKFCKaXq8D96VTt1Z4EGKYgwG0voBKZaCEKYU/0ARGnSlSwxINQ8ROCnBWMfn2sx
# yQt08EXVMznNLtXjc6U5zCoCi6SaV85GH40No3MUFXBQt29ZSlFqO/fuHGZHYBwS
# wuVKvTjjNF4EsGt3rS4Qsv6BwZWMM+dE6yXpKWk68kR8IGp+6QGxkMbWt9uEX2Md
# VuemKVnFYw0XGCGy5K+ZkvoA2DGpEw0QxVSOMs8CI55Oc9SkTKz5fUSzXXGo1if+
# M1CTjOPJu6pMym6gy6XpFa8/QioDA/jE2vBQvfJ64TwhJDV159s=
# =k8e9
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Jul 2024 10:16:31 AM AEST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (61 commits)
hw/nvme: Add SPDM over DOE support
backends: Initial support for SPDM socket support
hw/pci: Add all Data Object Types defined in PCIe r6.0
tests/acpi: Add expected ACPI AML files for RISC-V
tests/qtest/bios-tables-test.c: Enable basic testing for RISC-V
tests/acpi: Add empty ACPI data files for RISC-V
tests/qtest/bios-tables-test.c: Remove the fall back path
tests/acpi: update expected DSDT blob for aarch64 and microvm
acpi/gpex: Create PCI link devices outside PCI root bridge
tests/acpi: Allow DSDT acpi table changes for aarch64
hw/riscv/virt-acpi-build.c: Update the HID of RISC-V UART
hw/riscv/virt-acpi-build.c: Add namespace devices for PLIC and APLIC
virtio-iommu: Add trace point on virtio_iommu_detach_endpoint_from_domain
hw/vfio/common: Add vfio_listener_region_del_iommu trace event
virtio-iommu: Remove the end point on detach
virtio-iommu: Free [host_]resv_ranges on unset_iommu_devices
virtio-iommu: Remove probe_done
Revert "virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged"
gdbstub: Add helper function to unregister GDB register space
physmem: Add helper function to destroy CPU AddressSpace
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-8-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The default behavior of some Aspeed machines is to boot from the eMMC
device, like the rainier-bmc. Others like ast2600-evb could also boot
from eMMC if the HW strapping boot-from-eMMC bit was set. Add a
property to set or unset this bit. This is useful to test boot images.
For now, only activate this property on the ast2600-evb and rainier-bmc
machines for which eMMC images are available or can be built.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
=p9h4
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: features,fixes
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
# njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
# va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
# vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
# w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
# BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
# =p9h4
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 03 Jul 2024 03:41:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (85 commits)
hw/pci: Replace -1 with UINT32_MAX for romsize
pcie_sriov: Register VFs after migration
pcie_sriov: Remove num_vfs from PCIESriovPF
pcie_sriov: Release VFs failed to realize
pcie_sriov: Reuse SR-IOV VF device instances
pcie_sriov: Ensure VF function number does not overflow
pcie_sriov: Do not manually unrealize
hw/ppc/spapr_pci: Do not reject VFs created after a PF
hw/ppc/spapr_pci: Do not create DT for disabled PCI device
hw/pci: Rename has_power to enabled
virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged
virtio: remove virtio_tswap16s() call in vring_packed_event_read()
hw/cxl/events: Mark cxl-add-dynamic-capacity and cxl-release-dynamic-capcity unstable
hw/cxl/events: Improve QMP interfaces and documentation for add/release dynamic capacity.
tests/data/acpi/rebuild-expected-aml.sh: Add RISC-V
pc-bios/meson.build: Add support for RISC-V in unpack_edk2_blobs
meson.build: Add RISC-V to the edk2-target list
tests/data/acpi/virt: Move ARM64 ACPI tables under aarch64/${machine} path
tests/data/acpi: Move x86 ACPI tables under x86/${machine} path
tests/qtest/bios-tables-test.c: Set "arch" for x86 tests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
shm_open() creates and opens a new POSIX shared memory object.
A POSIX shared memory object allows creating memory backend with an
associated file descriptor that can be shared with external processes
(e.g. vhost-user).
The new `memory-backend-shm` can be used as an alternative when
`memory-backend-memfd` is not available (Linux only), since shm_open()
should be provided by any POSIX-compliant operating system.
This backend mimics memfd, allocating memory that is practically
anonymous. In theory shm_open() requires a name, but this is allocated
for a short time interval and shm_unlink() is called right after
shm_open(). After that, only fd is shared with external processes
(e.g., vhost-user) as if it were associated with anonymous memory.
In the future we may also allow the user to specify the name to be
passed to shm_open(), but for now we keep the backend simple, mimicking
anonymous memory such as memfd.
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com> (QAPI schema)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240618100519.145853-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Added the supported device list and an example command.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240621125906.1300995-4-sai.pavan.boddu@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable FEAT_Debugv8p8 for max CPU. This feature is out of scope for QEMU
since it concerns the external debug interface for JTAG, but is
mandatory in Armv8.8 implementations, hence it is reported as supported
in the ID registers.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240624180915.4528-4-gustavo.romero@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We don't ship a binary that is simply called "qemu", so we should
avoid this in the documentation. Use the configurable binary name
via "|qemu_system|" instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch corrects minor typographical errors to ensure the ASCII art
aligns with the explanations provided. Specifically, it fixes an
incorrect root port reference and removes redundant words.
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Enable CPU cluster support on SbsaQemu platform, so that users can
specify a 4-level CPU hierarchy sockets/clusters/cores/threads. And
this topology can be passed to the firmware through /cpus/topology
Device Tree.
Signed-off-by: Xiong Yining <xiongyining1480@phytium.com.cn>
Reviewed-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20240607103825.1295328-2-xiongyining1480@phytium.com.cn
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For some use-cases, it is helpful to have more than one UART
available to the guest. If the second UART slot is not already used
for a TrustZone Secure-World-only UART, create it as a NonSecure UART
only when the user provides a serial backend (e.g. via a second
-serial command line option).
This avoids problems where existing guest software only expects a
single UART, and gets confused by the second UART in the DTB. The
major example of this is older EDK2 firmware, which will send the
GRUB bootloader output to UART1 and the guest serial output to UART0.
Users who want to use both UARTs with a guest setup including EDK2
are advised to update to EDK2 release edk2-stable202311 or newer.
(The prebuilt EDK2 blobs QEMU upstream provides are new enough.)
The relevant EDK2 changes are the ones described here:
https://bugzilla.tianocore.org/show_bug.cgi?id=4577
Inspired-by: Axel Heider <axel.heider@hensoldt.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610162343.2131524-4-peter.maydell@linaro.org
Add AST2700 Evaluation board and its boot command.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Different versions of PC machine support different maximum vCPUs, and
even different features have limits on the maximum number of vCPUs (
For example, if x2apic is not enabled in the TCG case, the maximum of
255 vCPUs are supported).
It is difficult to list the maximum vCPUs under all restrictions. Thus,
to avoid confusion, avoid mentioning specific maximum vCPU number
limitations here.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240606085436.2028900-1-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-SNP support relies on a different set of properties/state than the
existing 'sev-guest' object. This patch introduces the 'sev-snp-guest'
object, which can be used to configure an SEV-SNP guest. For example,
a default-configured SEV-SNP guest with no additional information
passed in for use with attestation:
-object sev-snp-guest,id=sev0
or a fully-specified SEV-SNP guest where all spec-defined binary
blobs are passed in as base64-encoded strings:
-object sev-snp-guest,id=sev0, \
policy=0x30000, \
init-flags=0, \
id-block=YWFhYWFhYWFhYWFhYWFhCg==, \
id-auth=CxHK/OKLkXGn/KpAC7Wl1FSiisWDbGTEKz..., \
author-key-enabled=on, \
host-data=LNkCWBRC5CcdGXirbNUV1OrsR28s..., \
guest-visible-workarounds=AA==, \
See the QAPI schema updates included in this patch for more usage
details.
In some cases these blobs may be up to 4096 characters, but this is
generally well below the default limit for linux hosts where
command-line sizes are defined by the sysconf-configurable ARG_MAX
value, which defaults to 2097152 characters for Ubuntu hosts, for
example.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Acked-by: Markus Armbruster <armbru@redhat.com> (for QAPI schema)
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-8-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
FEAT_WFxT introduces new instructions WFIT and WFET, which are like
the existing WFI and WFE but allow the guest to pass a timeout value
in a register. The instructions will wait for an interrupt/event as
usual, but will also stop waiting when the value of CNTVCT_EL0 is
greater than or equal to the specified timeout value.
We implement WFIT by setting up a timer to expire at the right
point; when the timer expires it sets the EXITTB interrupt, which
will cause the CPU to leave the halted state. If we come out of
halt for some other reason, we unset the pending timer.
We implement WFET as a nop, which is architecturally permitted and
matches the way we currently make WFE a nop.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240430140035.3889879-3-peter.maydell@linaro.org
The board list in target-arm.rst is supposed to be in alphabetical
order by the title text of each file (which is not the same as
alphabetical order by filename). A few items had got out of order;
correct them.
The entry for
"Facebook Yosemite v3.5 Platform and CraterLake Server (fby35)"
remains out-of-order, because this is not its own file
but is currently part of the aspeed.rst file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240520141421.1895138-1-peter.maydell@linaro.org
