Commit Graph

41790 Commits

Author SHA1 Message Date
Max Reitz
373340b26c block: Move I/O status and error actions into BB
These options are only relevant for the user of a whole BDS tree (like a
guest device or a block job) and should thus be moved into the
BlockBackend.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:23 +02:00
Max Reitz
7f0e9da6f1 block: Move BlockAcctStats into BlockBackend
As the comment above bdrv_get_stats() says, BlockAcctStats is something
which belongs to the device instead of each BlockDriverState. This patch
therefore moves it into the BlockBackend.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:23 +02:00
Max Reitz
53d8f9d8fb block: Remove wr_highest_sector from BlockAcctStats
BlockAcctStats contains statistics about the data transferred from and
to the device; wr_highest_sector does not fit in with the rest.

Furthermore, those statistics are supposed to be specific for a certain
device and not necessarily for a BDS (see the comment above
bdrv_get_stats()); on the other hand, wr_highest_sector may be a rather
important information to know for each BDS. When BlockAcctStats is
finally removed from the BDS, we will want to keep wr_highest_sector in
the BDS.

Finally, wr_highest_sector is renamed to wr_highest_offset and given the
appropriate meaning. Externally, it is represented as an offset so there
is no point in doing something different internally. Its definition is
changed to match that in qapi/block-core.json which is "the offset after
the greatest byte written to". Doing so should not cause any harm since
if external programs tried to calculate the volume usage by
(wr_highest_offset + 512) / volume_size, after this patch they will just
assume the volume to be full slightly earlier than before.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:23 +02:00
Max Reitz
68e9ec017b block: Move guest_block_size into BlockBackend
guest_block_size is a guest device property so it should be moved into
the interface between block layer and guest devices, which is the
BlockBackend.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:23 +02:00
Max Reitz
4981bdec0d block: Fix BB AIOCB AioContext without BDS
Fix the BlockBackend's AIOCB AioContext for aborting AIO in case there
is no BDS. If there is no implementation of AIOCBInfo::get_aio_context()
the AioContext is derived from the BDS the AIOCB belongs to. If that BDS
is NULL (because it has been removed from the BB) this will not work.

This patch makes blk_get_aio_context() fall back to the main loop
context if the BDS pointer is NULL and implements
AIOCBInfo::get_aio_context() (blk_aiocb_get_aio_context()) which invokes
blk_get_aio_context().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:23 +02:00
Max Reitz
7d3467d903 hw/usb-storage: Check whether BB is inserted
Only call bdrv_add_key() on the BlockDriverState if it is not NULL.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:23 +02:00
Max Reitz
2e1280e8ff hw/block/fdc: Implement tray status
The tray of an FDD is open iff there is no medium inserted (there are
only two states for an FDD: "medium inserted" or "no medium inserted").

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:23 +02:00
Max Reitz
b4d02820d9 block: Invoke change media CB before NULLing drv
In order to handle host device passthrough, some guest device models
may call blk_is_inserted() to check whether the medium is inserted on
the host, when checking the guest tray status.

This tray status is inquired by blk_dev_change_media_cb(); because
bdrv_is_inserted() (invoked by blk_is_inserted()) always returns false
for BDS with drv set to NULL, blk_dev_change_media_cb() should therefore
be called before drv is set to NULL.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:23 +02:00
Max Reitz
1354c47378 block/raw_bsd: Drop raw_is_inserted()
With the new automatically-recursive implementation of
bdrv_is_inserted() checking by default whether all the children of a BDS
are inserted, we can drop raw's own implementation.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:23 +02:00
Max Reitz
28d7a78996 block: Make bdrv_is_inserted() recursive
If bdrv_is_inserted() is called on the top level BDS, it should make
sure all nodes in the BDS tree are actually inserted.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:22 +02:00
Max Reitz
db0284f86a block: Add blk_is_available()
blk_is_available() returns true iff the BDS is inserted (which means
blk_bs() is not NULL and bdrv_is_inserted() returns true) and if the
tray of the guest device is closed.

blk_is_inserted() is changed to return true only if blk_bs() is not
NULL.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:22 +02:00
Max Reitz
e031f75048 block: Make bdrv_is_inserted() return a bool
Make bdrv_is_inserted(), blk_is_inserted(), and the callback
BlockDriver.bdrv_is_inserted() return a bool.

Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:22 +02:00
Max Reitz
8e9e653038 iotests: Only create BB if necessary
Tests 071 and 081 test giving references in blockdev-add. It is not
necessary to create a BlockBackend here, so omit it.

While at it, fix up some blockdev-add invocations in the vicinity
(s/raw/$IMGFMT/ in 081, drop the format BDS for blkverify's raw child in
071).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:22 +02:00
Max Reitz
be4b67bc7d blockdev: Allow creation of BDS trees without BB
If the "id" field is missing from the options given to blockdev-add,
just omit the BlockBackend and create the BlockDriverState tree alone.

However, if "id" is missing, "node-name" must be specified; otherwise,
the BDS tree would no longer be accessible.

Many BDS options which are not parsed by bdrv_open() (like caching)
cannot be specified for these BB-less BDS trees yet. A future patch will
remove this limitation.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:22 +02:00
Max Reitz
d44f928a54 block: Set BDRV_O_INCOMING in bdrv_fill_options()
This flag should not be set for the root BDS only, but for any BDS that
is being created while incoming migration is pending, so setting it is
moved from blockdev_init() to bdrv_fill_options().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:22 +02:00
Max Reitz
f709623b3d block: Remove host floppy support
It has been deprecated as of 2.3, so we can now remove it.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:22 +02:00
Peter Maydell
1e700f4c6c qemu-ga patch queue
* unbreak qga-test unit test on travis-ci systems by not assuming a
   disk-based filesystem must be present
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWKj3LAAoJEDNTyc7xCLWE+wMH/2pqXYDKM7fkH9/ddU3IKoiE
 b3+VbqQi6aoz13oqEPnBECTkY0dE2AEp/a9TvA+KbjvaK037sUXXJ09xaUz/ATlZ
 2qm5mvRYq/2Xv6mfOLQe9z8WzRURXsNRV0Tflf5KRbn1wQnLZGsSaAe70yDDF1l2
 udcWbyeyo4iKEx9pYzf1OR/2us3wlvGOhgWKNgFPq3GZJYSSYBXQaog7Jp6j/f/m
 H7RjKdGRWtthLs4CezN3L4mkkHJUyW6l1HK68rgtjIzWYpzPyxNWuPhIQcTEywEq
 YWTtpS3MOTu1tluim63qYaSrC7vVxf3rZNgkPsorrtqECP17Rj6ZAjdc/nM86sY=
 =FW/j
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2015-10-23-tag' into staging

qemu-ga patch queue

* unbreak qga-test unit test on travis-ci systems by not assuming a
  disk-based filesystem must be present

# gpg: Signature made Fri 23 Oct 2015 15:01:47 BST using RSA key ID F108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg:                 aka "Michael Roth <mdroth@utexas.edu>"
# gpg:                 aka "Michael Roth <mdroth@linux.vnet.ibm.com>"

* remotes/mdroth/tags/qga-pull-2015-10-23-tag:
  tests: test-qga, loosen assumptions about host filesystems

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-23 15:55:50 +01:00
Michael Roth
b3e9e584fc tests: test-qga, loosen assumptions about host filesystems
QGA skips pseudo-filesystems when querying filesystems via
guest-get-fsinfo. On some hosts, such as travis-ci which uses
containers with simfs filesystems, QGA might not report *any*
filesystems. Our test case assumes there would be at least one,
leading to false error messages in these situations.

Instead, sanity-check values iff we get at least one filesystem.

Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-23 08:57:45 -05:00
Peter Maydell
147482ae35 ppc patch queue - 2015-10-23
sPAPR highlights:
   * Allow VFIO devices on the spapr-pci-host-bridge
   * Allow virtio VGA
   * Safer handling of HTAB allocation
   * ibm,pa-features device tree property
 
 non-sPAPR highlights:
   * Categorization of many ppc specific devices in help output
   * Tweaks to MMU type constants
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWKdNsAAoJEGw4ysog2bOSDxsQAKz5SLPmHhRztR8K0BMne0FP
 5Yi3zFLAkWHCDA60BUaQPy2hh6jz+EVecxPecWb+nQ/jhQBBFjpkckgorjcHz6jQ
 6pUHK1vZOPSq6bmb9/r+h5Po9pX7A2ncKX+wCJfwlceE7pNauDvJDQyKSXtwigPg
 IFsM+4TKrjwR7rVBHLoSKabM/2dGW0xxWpKII/xtuU6npfH15tdvadObjMfNLFcC
 gfTyggRMtuZwOCAxnyIZz+6tdNGqUbIV8zmzMHoWhpaPc3MBGQA4DrtOyWsWnLL3
 VoIqOAVFzR7r2OAM610SZej1jn6Nl7wJtdFIq3NVXtMp/e3xzGjEK7CsVW14wjC3
 pbVPwESe3fT91y7vyZVHLoSFlh9dOs+deNGCo58crJTq7gmeg4vDQwjn5Ec2Ch8P
 92uZyuhsTGQ/m0xl2QAR29dcapTXytptJugVDUvxZw78UG3xY0DicBiW43cMh22/
 JwIVtlmbSyIrL+SqO5j0ylCSPSn7BtE2EjHrcyAqHTM8c6cv4JFIN4p8ZYqqILVH
 LoRs6gGbrGey4QCVRDJc2w/pO21q0Xj+BIgZzcaZ8craKkCwarz5wYfJj7L8O4Hf
 tzHAl4HjHQ3AZr03ejOKy40Y3CNaAAcU9mTFOq72r6LuoPoenbUh7Sm9Bo9st1Z2
 cUjqLvzaL2N04ppVEwsM
 =UrXv
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-next-20151023' into staging

ppc patch queue - 2015-10-23

sPAPR highlights:
  * Allow VFIO devices on the spapr-pci-host-bridge
  * Allow virtio VGA
  * Safer handling of HTAB allocation
  * ibm,pa-features device tree property

non-sPAPR highlights:
  * Categorization of many ppc specific devices in help output
  * Tweaks to MMU type constants

# gpg: Signature made Fri 23 Oct 2015 07:27:56 BST using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-next-20151023: (21 commits)
  prep: do not use CPU_LOG_IOPORT, convert to tracepoints
  openpic: add to misc category
  macio-nvram: add to misc category
  macio: add to bridge category
  uninorth: add to bridge category
  macio-ide: add to storage category
  cuda: add to bridge category
  grackle: add to bridge category
  escc: add to input category
  cmd646: add to storage category
  adb: add to input category
  ppc/spapr: Add "ibm,pa-features" property to the device-tree
  ppc: Add mmu_model defines for arch 2.03 and 2.07
  hw/scsi/spapr_vscsi: Remove superfluous memset
  spapr_pci: Allow VFIO devices to work on the normal PCI host bridge
  spapr_iommu: Provide a function to switch a TCE table to allowing VFIO
  spapr_iommu: Rename vfio_accel parameter
  spapr_pci: Allow PCI host bridge DMA window to be configured
  spapr: Add "slb-size" property to CPU device tree nodes
  spapr: Abort when HTAB of requested size isn't allocated
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-23 13:09:09 +01:00
Peter Maydell
431429a5b8 Merge qcrypto-fixes 2015/10/22
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJWKSUBAAoJEL6G67QVEE/f7cgQAJQPIFv/tq6tvAnN+vZQDS5V
 xVhahx3FoOCty3LkdPnSya+C+jvJe9/JwF4VyJHIP/IrWrtJOyWkjg18R86YhWjo
 QjycP8usYFZ4YiF5IVOpeKBhM2rff9q9U+5i+aZ8GIJKjpkd2/Ij4itlmDSEQkX9
 umZ5AIpY0yHjn+HobJOdQaouKn6/OLiNSEBmO1/G43xipwlQeXRUDKDKTt58ebEA
 cNjgICBr41J0Dvol8trZjJDTbs/g1mw6N2NK/kauLcidgw5dT/MvyPD0d67Oo2rb
 ZbsnfX8ZKljT5ZsNPItBJqFuQmfJA6ssPYkqdLpQU7HjBQUU5fW84MK2Uoc7hhgF
 f/SmDLcCJ49fNew6MDwN5OgkO/7UnEASfLaQltdVmI7IvGvxVy58mLoJzdbS+Fh/
 ZLUbPYMj9lXtsQYjkrdzhedV8rLpWVi35pQ+7kKoIzt3hcclKoJJUJJ09+nenxNo
 h9o83He+AbqhCQM9YCwM3OLtgyxHn1H2DzlQZrma3tRZTz8RE6KBKhKAiF50iMOS
 KouHV0kON1yVXJS2Ro+KpU0ja3Ck4YF89gR9ty2aPfPMJvkTNPqIl0gJxP+haOBB
 FII6PATfh6cpfnSa/FJ01tHzfyUcA4sTsJVex13LurYTuVAzXYxg8iKMY0stbZ6y
 I4dJ9WFvyG4aVNz5KKLC
 =5byU
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/berrange/tags/qcrypto-fixes-pull-20151022-2' into staging

Merge qcrypto-fixes 2015/10/22

# gpg: Signature made Thu 22 Oct 2015 19:03:45 BST using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>"

* remotes/berrange/tags/qcrypto-fixes-pull-20151022-2:
  configure: avoid polluting global CFLAGS with tasn1 flags
  crypto: add sanity checking of plaintext/ciphertext length
  crypto: don't let builtin aes crash if no IV is provided
  crypto: allow use of nettle/gcrypt to be selected explicitly

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-23 12:09:02 +01:00
Peter Maydell
dfbe0642ef vhost: build fix
Fix build breakages when using older gcc.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWKTqnAAoJECgfDbjSjVRpqtIH/2HOjVIcONQKSt6JqcRCqplS
 LUm2Y0n/iPOktzdX1PmYF3t6AXoSJ+9LYePgi691aRZR9CyqZkYiOOOT9NIqpK/I
 41HxT0qjl2F8RCRQBT8WjUeZNb1XugO6yJ9y+FuNuht00F+1q/M9KjWOzLSPguWF
 ri5ygKNVislca8HU//M8Cc30YwpSW2zT1QcQ2u9UQvIxWevB4AXkAz743EV+0liD
 gjy9qfRU7cZgraN0fSx25jyO2oT0LZCvTJ3BZc9+K2wjdTSx+4bVzc4X/iB2c5/i
 3y3Fhr2nEAjvG3j3KwRD6k1Sz6xLVWVmQSdBbgbx67Fmf8HTcX+Snjqw6V72IQc=
 =NyBA
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

vhost: build fix

Fix build breakages when using older gcc.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 22 Oct 2015 20:36:07 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  vhost-user: fix up rhel6 build

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-23 10:24:08 +01:00
Paolo Bonzini
659f7f6556 prep: do not use CPU_LOG_IOPORT, convert to tracepoints
These messages are disabled by default; a perfect usecase for tracepoints.
Convert them over.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 12:38:28 +11:00
Laurent Vivier
29f8dd66e8 openpic: add to misc category
openpic is a programmable interrupt controller, so
add it to the misc category.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 12:35:18 +11:00
Laurent Vivier
175fe9e7c8 macio-nvram: add to misc category
The macio nvram is a non volatile RAM, so add it
the misc category.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 12:35:18 +11:00
Laurent Vivier
f9f2a9f26f macio: add to bridge category
macio is a bridge between the PCI bus and the Mac nvram,
IDE controller and PIC, so add it to the bridge category.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 12:35:18 +11:00
Laurent Vivier
1d16f86a43 uninorth: add to bridge category
Uninorth is the mac99 PCI host controller, so add
it to the bridge category.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 12:35:18 +11:00
Laurent Vivier
3469d9bce8 macio-ide: add to storage category
macio-ide is an IDE controller, so add it
to the storage category.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 12:35:18 +11:00
Laurent Vivier
599d7326c3 cuda: add to bridge category
Cuda is a bridge between PowerMac system bus and the ADB controller,
real-time clock, pram and the power management unit.

So add it to the bridge category.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 12:35:18 +11:00
Laurent Vivier
e16244355f grackle: add to bridge category
Grackle is the PCI host controller of oldworld powermac,
so add it to the bridge category.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 12:35:18 +11:00
Laurent Vivier
f8d4c07c78 escc: add to input category
ESCC is a serial port controller, so add it
to the input category.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 12:35:17 +11:00
Laurent Vivier
74623e7369 cmd646: add to storage category
cmd646 is an IDE controller, so add it to the
storage category.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 12:35:17 +11:00
Laurent Vivier
32f3a8992e adb: add to input category
The Apple Desktop Bus is used to connect a keyboard and a mouse,
so add it to the input category.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 12:35:17 +11:00
Benjamin Herrenschmidt
90da0d5a70 ppc/spapr: Add "ibm,pa-features" property to the device-tree
LoPAPR defines a "ibm,pa-features" per-CPU device tree property which
describes extended features of the Processor Architecture.

This adds the property to the device tree. At the moment this is the
copy of what pHyp advertises except "I=1 (cache inhibited) Large Pages"
which is enabled for TCG and disabled when running under HV KVM host
with 4K system page size.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[aik: rebased, changed commit log, moved ci_large_pages initialization,
renamed pa_features arrays]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 12:22:40 +11:00
Benjamin Herrenschmidt
aa4bb58752 ppc: Add mmu_model defines for arch 2.03 and 2.07
This removes unused POWERPC_MMU_2_06a/POWERPC_MMU_2_06d.

This replaces POWERPC_MMU_64B with POWERPC_MMU_2_03 for POWER5+ to be
more explicit about the version of the PowerISA supported.

This defines POWERPC_MMU_2_07 and uses it for the POWER8 CPU family.
This will not have an immediate effect now but it will in the following
patch.

This should cause no behavioural change.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[aik: rebased, changed commit log]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 12:22:40 +11:00
Thomas Huth
a23dec105c hw/scsi/spapr_vscsi: Remove superfluous memset
g_malloc0 already clears the memory, so no need for
the additional memset here.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 10:38:11 +11:00
David Gibson
185181f883 spapr_pci: Allow VFIO devices to work on the normal PCI host bridge
The core VFIO infrastructure more or less allows VFIO devices to work
on any normal guest PCI host bridge (PHB) without extra logic.
However, the "spapr-pci-host-bridge" device (as opposed to the special
"spapr-pci-vfio-host-bridge" device) breaks this by using a partially
KVM accelerated implementation of the guest kernel IOMMU which won't
work with VFIO devices, without additional kernel support.

This patch allows VFIO devices to work on the spapr-pci-host-bridge,
by having it switch off KVM TCE acceleration when a VFIO device is
added to the PHB (either on startup, or by hotplug).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2015-10-23 10:38:10 +11:00
David Gibson
c10325d6f9 spapr_iommu: Provide a function to switch a TCE table to allowing VFIO
Because of the way non-VFIO guest IOMMU operations are KVM accelerated, not
all TCE tables (guest IOMMU contexts) can support VFIO devices.  Currently,
this is decided at creation time.

To support hotplug of VFIO devices, we need to allow a TCE table which
previously didn't allow VFIO devices to be switched so that it can.  This
patch adds an spapr_tce_set_need_vfio() function to do this, by
reallocating the table in userspace if necessary.

Currently this doesn't allow the KVM acceleration to be re-enabled if all
the VFIO devices are removed.  That's an optimization for another time.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2015-10-23 10:38:10 +11:00
David Gibson
6a81dd172c spapr_iommu: Rename vfio_accel parameter
The vfio_accel parameter used when creating a new TCE table (guest IOMMU
context) has a confusing name.  What it really means is whether we need the
TCE table created to be able to support VFIO devices.

VFIO is relevant, because when available we use in-kernel acceleration of
the TCE table, but that may not work with VFIO devices because updates to
the table are handled in kernel, bypass qemu and so don't hit qemu's
infrastructure for keeping the VFIO host IOMMU state in sync with the guest
IOMMU state.

Rename the parameter to "need_vfio" throughout.  This is a cosmetic change,
with no impact on the logic.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2015-10-23 10:38:10 +11:00
David Gibson
f93caaac36 spapr_pci: Allow PCI host bridge DMA window to be configured
At present the PCI host bridge (PHB) for the pseries machine type has a
fixed DMA window from 0..1GB (in PCI address space) which is mapped to real
memory via the PAPR paravirtualized IOMMU.

For better support of VFIO devices, we're going to want to allow for
different configurations of the DMA window.

Eventually we'll want to allow the guest itself to reconfigure the window
via the PAPR dynamic DMA window interface, but as a preliminary this patch
allows the user to reconfigure the window with new properties on the PHB
device.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2015-10-23 10:38:10 +11:00
Thomas Huth
fd5da5c472 spapr: Add "slb-size" property to CPU device tree nodes
According to a commit message in the Linux kernel (see here
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=b60c31d85a2a
for example), the name of the property that carries the information
about the number of SLB entries should be called "slb-size", and
not "ibm,slb-size". The Linux kernel can deal with both names, but
to be on the safe side we should support the official name, too.

[Now that LoPAPR is public, the relevant requirement can be found in
section C.6.1.8 --dwg]

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 10:38:10 +11:00
Bharata B Rao
7735fedaf4 spapr: Abort when HTAB of requested size isn't allocated
Terminate the guest when HTAB of requested size isn't allocated by
the host.

When memory hotplug is attempted on a guest that has booted with
less than requested HTAB size, the guest kernel will not be able
to gracefully fail the hotplug request. This patch will ensure that
we never end up in a situation where memory hotplug fails due to
less than requested HTAB size.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 10:38:10 +11:00
Bharata B Rao
b817772a25 spapr: Allocate HTAB from machine init
Allocate HTAB from ppc_spapr_init() so that we can abort the guest
if requested HTAB size is't allocated by the host. However retain the
htab reset call in spapr_reset_htab() so that HTAB gets reset (and
not allocated) during machine reset.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 10:38:10 +11:00
Michael S. Tsirkin
7f4a930e64 vhost-user: fix up rhel6 build
Build on RHEL6 fails:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=42875

Apparently unnamed unions couldn't use C99  named field initializers.
Let's just name the payload union field.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-22 22:34:59 +03:00
Daniel P. Berrange
9024603776 configure: avoid polluting global CFLAGS with tasn1 flags
The previous commit

  commit 9a2fd4347c
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Mon Apr 13 14:01:39 2015 +0100

    crypto: add sanity checking of TLS x509 credentials

defined new variables $TEST_LIBS and $TEST_CFLAGS and
used them in tests/Makefile to augment $LIBS and $CFLAGS.

Unfortunately this overlooks the fact that tests/Makefile
is not executed via recursive-make, it is just pulled into
the top level Makefile via an include statement. So rather
than just augmenting the compiler/linker flags for tests
it polluted the global flags.

This is thought to be behind a reported failure when
building the pixman module as a sub-module, since global
$CFLAGS are passed down to configure in pixman.

This change removes the $TEST_LIBS and $TEST_CFLAGS
replacing them with $TASN1_LIBS and $TASN1_CFLAGS,
setting only against specific objects/executables
that need them.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-22 19:03:08 +01:00
Daniel P. Berrange
3a661f1eab crypto: add sanity checking of plaintext/ciphertext length
When encrypting/decrypting data, the plaintext/ciphertext
buffers are required to be a multiple of the cipher block
size. If this is not done, nettle will abort and gcrypt
will report an error. To get consistent behaviour add
explicit checks upfront for the buffer sizes.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-22 19:03:08 +01:00
Daniel P. Berrange
eb2a770b17 crypto: don't let builtin aes crash if no IV is provided
If no IV is provided, then use a default IV of all-zeros
instead of crashing. This gives parity with gcrypt and
nettle backends.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-22 19:03:08 +01:00
Daniel P. Berrange
91bfcdb01d crypto: allow use of nettle/gcrypt to be selected explicitly
Currently the choice of whether to use nettle or gcrypt is
made based on what gnutls is linked to. There are times
when it is desirable to be able to force build against a
specific library. For example, if testing changes to QEMU's
crypto code all 3 possible backends need to be checked
regardless of what the local gnutls uses.

It is also desirable to be able to enable nettle/gcrypt
for cipher/hash algorithms, without enabling gnutls
for TLS support.

This gives two new configure flags, which allow the
following possibilities

Automatically determine nettle vs gcrypt from what
gnutls links to (recommended to minimize number of
crypto libraries linked to)

 ./configure

Automatically determine nettle vs gcrypt based on
which is installed

 ./configure --disable-gnutls

Force use of nettle

 ./configure --enable-nettle

Force use of gcrypt

 ./configure --enable-gcrypt

Force use of built-in AES & crippled-DES

 ./configure --disable-nettle --disable-gcrypt

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-22 19:03:07 +01:00
Peter Maydell
6a6739de51 Collected tcg backend patches
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWKATkAAoJEK0ScMxN0CebB8UIANdZAig2T1sls/ymYzzPN3HN
 FSUiekwxJIHD8Oq16Kz3Luj1yNnUyPqM0bE3sqVcmR/+xkdp1PwBQmklIG/P8DaC
 5FZErrZyccsRhMY9L2kRf1+NaQr8zOzZU2rNPLQmTifK80S+El3kHyBymeBZFODT
 TVAfdV5eeqQXK//7njR7JjjREolOnhLGi03zoTj6pEOIxxGGCPL9e6euruS8Eo82
 0oEy043rEOOLW3r+eLPmsOce43SejhKTdxnXGcToO8aQEknPoMHlbZVLj65KnLw1
 HB5HBooSMmZS+Y25rGzPKciuRqSDlwUD0VT7GllAMwoOH3TA8uvXjyKrzsbuRYY=
 =G59h
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20151021' into staging

Collected tcg backend patches

# gpg: Signature made Wed 21 Oct 2015 22:34:28 BST using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-tcg-20151021:
  cpu-exec: Add "nochain" debug flag
  tcg/mips: Support r6 SEL{NE, EQ}Z instead of MOVN/MOVZ
  tcg/mips: Support r6 multiply/divide encodings
  tcg/mips: Support r6 JR encoding
  tcg/mips: Add use_mips32r6_instructions definition
  disas/mips: Add R6 jr/jr.hb to disassembler
  tcg-opc.h: Simplify insn_start def
  tcg/ppc: Prefer mask over andi.
  tcg/ppc: Revise goto_tb implementation
  tcg/ppc: Adjust exit_tb for change in prologue placement

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-22 18:01:53 +01:00
Peter Maydell
b803894e2c QOM CPUState and X86CPU
* Adoption of CPUClass::disas_set_info() hook
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJWKQqsAAoJEPou0S0+fgE/PR0QAJksKlDCWu6dyp52Wwf1WGvf
 wRUVKDbpxVXN6mAbWrLXkQ7m1le+c4mnMn2xAZg49++vKWav34n4+a7N6e5aYUpz
 X79udKHc4VuGn8DrFLxupkCUIDWGJGlx59rN6TdZdX78YWhpRR+yT467Lz0oPae1
 styAO6KALs6+XP0r6gHl1OvY9JjKoSpgANmRCPEaI79/Cq06Gh70o0LwMI6mHz3l
 IL9KPgc8EO0GpBBd/GBSlXa7FSN9B/iOARVKly96ivYoIOBb9L2La2I8l/3CiA26
 +9uvVripXgrCjVvKbzV4ukxqy4emCff2nEJ6WfSLgXiSSZcOcttfhV8uBDmXDxB1
 fxfgYDwt14r0IoMnZjBqwzZlYIqjgj417XRhkg0jivRKurPk074/PaXn2XFtt1dz
 yXgqABLGvpWOElO3PYRyg4SLKAK0hhCp/hlWql+fb61aCMn21aqOX5ucxykv46Y/
 /gPxKVEVVoPO29r5GWuV5rBbU9q2+C+LcznzIjR7JSFAXTIKLMc5kvYdIVjhafMd
 6mHqTqpgAtIjvVjknZR4NTIbPGN/PwrdG7ZlSmIuP5sV92LZMJlnuivzHRjpn5o8
 SOtlidZQNl9T+BWxCWo0YaMrsi3uXfQe7xIxpHx5pYQzCblQv/ZpjvkMxJOFgkie
 00FpeI/PTcRgzR4V9V4E
 =VgY8
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/afaerber/tags/qom-cpu-for-peter' into staging

QOM CPUState and X86CPU

* Adoption of CPUClass::disas_set_info() hook

# gpg: Signature made Thu 22 Oct 2015 17:11:24 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-cpu-for-peter:
  disas: QOMify alpha specific disas setup
  disas: QOMify mips specific disas setup
  disas: QOMify sh4 specific disas setup
  disas: QOMify lm32 specific disas setup
  disas: QOMify sparc specific disas setup
  disas: QOMify m68k specific disas setup
  disas: QOMify moxie specific disas setup
  disas: QOMify s390x specific disas setup

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-22 17:33:54 +01:00
Peter Crosthwaite
0960be7cff disas: QOMify alpha specific disas setup
Move the target_disas() alpha specifics to the CPUClass::disas_set_info()
hook and delete the #ifdef specific code in disas.c.

This also makes monitor_disas() consistent with target_disas(), as
monitor_disas() was missing a set of the BFD (This was an omission from
commit b9bec751c8).

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-10-22 15:49:40 +02:00