The PAPR platform describes an OS environment that's presented by
a combination of a hypervisor and firmware. The features it specifies
require collaboration between the firmware and the hypervisor.
Since the beginning, the runtime component of the firmware (RTAS) has
been implemented as a 20 byte shim which simply forwards it to
a hypercall implemented in qemu. The boot time firmware component is
SLOF - but a build that's specific to qemu, and has always needed to be
updated in sync with it. Even though we've managed to limit the amount
of runtime communication we need between qemu and SLOF, there's some,
and it has become increasingly awkward to handle as we've implemented
new features.
This implements a boot time OF client interface (CI) which is
enabled by a new "x-vof" pseries machine option (stands for "Virtual Open
Firmware). When enabled, QEMU implements the custom H_OF_CLIENT hcall
which implements Open Firmware Client Interface (OF CI). This allows
using a smaller stateless firmware which does not have to manage
the device tree.
The new "vof.bin" firmware image is included with source code under
pc-bios/. It also includes RTAS blob.
This implements a handful of CI methods just to get -kernel/-initrd
working. In particular, this implements the device tree fetching and
simple memory allocator - "claim" (an OF CI memory allocator) and updates
"/memory@0/available" to report the client about available memory.
This implements changing some device tree properties which we know how
to deal with, the rest is ignored. To allow changes, this skips
fdt_pack() when x-vof=on as not packing the blob leaves some room for
appending.
In absence of SLOF, this assigns phandles to device tree nodes to make
device tree traversing work.
When x-vof=on, this adds "/chosen" every time QEMU (re)builds a tree.
This adds basic instances support which are managed by a hash map
ihandle -> [phandle].
Before the guest started, the used memory is:
0..e60 - the initial firmware
8000..10000 - stack
400000.. - kernel
3ea0000.. - initramdisk
This OF CI does not implement "interpret".
Unlike SLOF, this does not format uninitialized nvram. Instead, this
includes a disk image with pre-formatted nvram.
With this basic support, this can only boot into kernel directly.
However this is just enough for the petitboot kernel and initradmdisk to
boot from any possible source. Note this requires reasonably recent guest
kernel with:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=df5be5be8735
The immediate benefit is much faster booting time which especially
crucial with fully emulated early CPU bring up environments. Also this
may come handy when/if GRUB-in-the-userspace sees light of the day.
This separates VOF and sPAPR in a hope that VOF bits may be reused by
other POWERPC boards which do not support pSeries.
This assumes potential support for booting from QEMU backends
such as blockdev or netdev without devices/drivers used.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20210625055155.2252896-1-aik@ozlabs.ru>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
[dwg: Adjusted some includes which broke compile in some more obscure
compilation setups]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
lm832x_key_event() is specific go LM832x devices, not to the
I2C bus API. Move it out of "i2c.h" to a new header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
split sysemu part of cpu models,
also create a tiny _user.c with just the (at least for now),
empty implementation of apply_cpu_model.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-15-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
move kvm files into kvm/
After the reshuffling, update MAINTAINERS accordingly.
Make use of the new directory:
target/s390x/kvm/
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-14-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
all function calls are protected by kvm_enabled(),
so we do not need the stubs.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-13-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
move everything related to translate, as well as HELPER code in tcg/
mmu_helper.c stays put for now, as it contains both TCG and KVM code.
After the reshuffling, update MAINTAINERS accordingly.
Make use of the new directory:
target/s390x/tcg/
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-8-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This patch adds entry for the vhost-user-rng related files.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Message-Id: <20210614202842.581640-6-mathieu.poirier@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To lower the entry level for new developers, add a link to the 9p
developer docs (i.e. qemu wiki) to MAINTAINERS and to the beginning of
9p source files, that is to: https://wiki.qemu.org/Documentation/9p
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Acked-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1leeDf-0008GZ-9q@lizzy.crudebyte.com>
Test the kernel from Lemote rescue image:
http://dev.lemote.com/files/resource/download/rescue/rescue-yl
Once downloaded, set the RESCUE_YL_PATH environment variable
to point to the downloaded image and test as:
$ RESCUE_YL_PATH=~/images/fuloong2e/rescue-yl \
AVOCADO_ALLOW_UNTRUSTED_CODE=1 \
avocado --show=app,console run tests/acceptance/machine_mips_fuloong2e.py
Fetching asset from tests/acceptance/machine_mips_fuloong2e.py:MipsFuloong2e.test_linux_kernel_isa_serial
(1/1) tests/acceptance/machine_mips_fuloong2e.py:MipsFuloong2e.test_linux_kernel_isa_serial:
console: Linux version 2.6.27.7lemote (root@debian) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #6 Fri Dec 12 00:11:25 CST 2008
console: busclock=33000000, cpuclock=-2145008360,memsize=256,highmemsize=0
console: console [early0] enabled
console: CPU revision is: 00006302 (ICT Loongson-2)
PASS (0.16 s)
JOB TIME : 0.51 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210624202747.1433023-5-f4bug@amsat.org>
Extract 4900 lines from the huge translate.c to a new file,
'nanomips_translate.c.inc'. As there are too many inter-
dependencies we don't compile it as another object, but
keep including it in the big translate.o. We gain in code
maintainability.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201120210844.2625602-13-f4bug@amsat.org>
- Fix MISA in the DisasContext
- Fix GDB CSR XML generation
- QOMify the SiFive UART
- Add support for the OpenTitan timer
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmDUc9oACgkQIeENKd+X
cFQnJQf/YJ1DcCc5HKnJD7dKOO7auWGrjcBydVLZpCKT/sBYO2m4+LcUoCkndJst
z2awR2sL6zgTqkpKTFJzENBKcXf0NOAvGvuvAznPQosvW26NhY20EsWHgRxn79DF
2CvFChD4J/aBZa/JwP7232CebsD2IqKn89gP5u6ldFNH36EGpzBRjFOroXLu98x3
arhr7AoyhTTpxcWkWuLW9YVwqZQ8xKKCVTMuqMC8SRI48FUB5+ndy3pTQqIjdoCg
U0wfJIrmPBakw3ik0nbNd47Lu/yxCQMU/O4M/flSbbC1GpomiUotlap9O3LlvNYo
7VeF8eS3/7Okn2/5jEwuFES+MmtUSQ==
=zVjG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20210624-2' into staging
Third RISC-V PR for 6.1 release
- Fix MISA in the DisasContext
- Fix GDB CSR XML generation
- QOMify the SiFive UART
- Add support for the OpenTitan timer
# gpg: Signature made Thu 24 Jun 2021 13:00:26 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20210624-2:
hw/riscv: OpenTitan: Connect the mtime and mtimecmp timer
hw/timer: Initial commit of Ibex Timer
hw/char/ibex_uart: Make the register layout private
hw/char: QOMify sifive_uart
hw/char: Consistent function names for sifive_uart
target/riscv: gdbstub: Fix dynamic CSR XML generation
target/riscv: Use target_ulong for the DisasContext misa
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some machines use floppy controllers via the SysBus interface,
and don't need to pull in all the SysBus code.
Extract the SysBus specific code to a new unit: fdc-sysbus.c,
and add a new Kconfig symbol: "FDC_SYSBUS".
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-6-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Some machines use floppy controllers via the SysBus interface,
and don't need to pull in all the ISA code.
Extract the ISA specific code to a new unit: fdc-isa.c, and
add a new Kconfig symbol: "FDC_ISA".
This allows us to remove the FIXME from commit dd0ff8191a
("isa: express SuperIO dependencies with Kconfig").
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-5-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We want to extract ISA/SysBus code from the generic fdc.c file.
First, declare the prototypes we will access from the new units
into a new local header: "fdc-internal.h".
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-4-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This adds the target guide for BBC Micro:bit.
Information is taken from https://wiki.qemu.org/Features/MicroBit
and from hw/arm/nrf51_soc.c.
Signed-off-by: Alexandre Iooss <erdnaxe@crans.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20210621075625.540471-1-erdnaxe@crans.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the Ibex timer. This is used with the RISC-V
mtime/mtimecmp similar to the SiFive CLINT.
We currently don't support changing the prescale or the timervalue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 716fdea2244515ce86a2c46fe69467d013c03147.1624001156.git.alistair.francis@wdc.com
Features:
* Add ratelimit for bus locks acquired in guest (Chenyi Qiang)
Documentation:
* SEV documentation updates (Tom Lendacky)
* Add a table showing x86-64 ABI compatibility levels (Daniel P. Berrangé)
Automated changes:
* Update Linux headers to 5.13-rc4 (Eduardo Habkost)
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEEWjIv1avE09usz9GqKAeTb5hNxaYFAmDM+T4UHGVoYWJrb3N0
QHJlZGhhdC5jb20ACgkQKAeTb5hNxabUrQ/+PtiJjd1cW9nhA0kWu8dVGq3xXJb4
Nbma86tRPKBauTeQCLccXEvUjLqgFejeQlArhq4QKErLisXu4TDuQ+GeAfdR7h5P
MTMSo0C665cT2/NbrwQizSPQdrNEgZAYRaDRafZLQTJ1TStzWDB1Vg79rzpWPcn0
76XjIfSdGZUa4B1OvjNvUFq/SXf+0hW75soCwRhDNh5tfzfyct0XCSRF/wTXqyR/
7yxDtfTzUAvT+6l3qb8ky+wqUTIY58BgjbdIGhyAUr5/N8y5YystF41TUVoy772k
pmCXHniMmgmhH7HVwGujtc6mPe5y1VFJVaA08Pzb7KwSfdO9F/3Gk3DHpKW8/whi
tCGluBqz0qlyhsnP9wDRJb6BzCBl2hVqu50DL+uSNsJOSIW60LLMJV4ANlDYdDM3
s33S5NrM0DsRAjrtczPdvKPWwaVE4NB2bYX1I3yYGgflwzQYOjBmswM/UgymhlZk
5dxtF9CX2p+Vre6UoLDKum1DJDCcWjHouJAAqZzxxEko56yWgTUSzTcK4GVOlsAc
qX4gJbFpOzDlSdpDTG/fcnQlCnwc1jxCzsB8Wy2KJiBif3Sa3Wh1s00Cp7oGNQt+
P/z2Fp1agl8u83bbvlIjZnsv0O2g5Ks4r5tBhXmqI36aiU26F/x39SUfp7/7OAUd
CQBGBGXqpnOmUcE=
=YWGX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost-gl/tags/x86-next-pull-request' into staging
x86 queue, 2021-06-18
Features:
* Add ratelimit for bus locks acquired in guest (Chenyi Qiang)
Documentation:
* SEV documentation updates (Tom Lendacky)
* Add a table showing x86-64 ABI compatibility levels (Daniel P. Berrangé)
Automated changes:
* Update Linux headers to 5.13-rc4 (Eduardo Habkost)
# gpg: Signature made Fri 18 Jun 2021 20:51:26 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost-gl/tags/x86-next-pull-request:
scripts: helper to generate x86_64 CPU ABI compat info
docs: add a table showing x86-64 ABI compatibility levels
docs/interop/firmware.json: Add SEV-ES support
docs: Add SEV-ES documentation to amd-memory-encryption.txt
doc: Fix some mistakes in the SEV documentation
i386: Add ratelimit for bus locks acquired in guest
Update Linux headers to 5.13-rc4
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want the ARM maintainers and the qemu-arm@ list to be
notified when this file is modified. Add an entry to the
'ARM TCG CPUs' section in the MAINTAINERS file.
Acked-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210526170432.343588-2-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Document interfaces used for VFIO device migration. Added flow
of state changes during live migration with VFIO device.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Co-developed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Tarun Gupta <targupta@nvidia.com>
Message-Id: <20210418122251.88809-1-targupta@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
It is useful to know which CPUs satisfy each x86-64 ABI
compatibility level, when dealing with guest OS that require
something newer than the baseline ABI.
These ABI levels are defined in:
https://gitlab.com/x86-psABIs/x86-64-ABI/
and supported by GCC, Clang, glibc and more.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210607135843.196595-2-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It's an adc, put it where it belongs.
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
It's an ADC, put it where it belongs.
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Alistair Francis <alistair@alistair23.me>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
While the SB16 seems to work up to 48000 Hz, the "Sound Blaster Series
Hardware Programming Guide" limit the sampling range from 4000 Hz to
44100 Hz (Section 3-9, 3-10: Digitized Sound I/O Programming, tables
3-2 and 3-3).
Later, section 6-15 (DSP Commands) is more specific regarding the 41h /
42h registers (Set digitized sound output sampling rate):
Valid sampling rates range from 5000 to 45000 Hz inclusive.
There is no comment regarding error handling if the register is filled
with an out-of-range value. (See also section 3-28 "8-bit or 16-bit
Auto-initialize Transfer"). Assume limits are enforced in hardware.
This fixes triggering an assertion in audio_calloc():
#1 abort
#2 audio_bug audio/audio.c:119:9
#3 audio_calloc audio/audio.c:154:9
#4 audio_pcm_sw_alloc_resources_out audio/audio_template.h:116:15
#5 audio_pcm_sw_init_out audio/audio_template.h:175:11
#6 audio_pcm_create_voice_pair_out audio/audio_template.h:410:9
#7 AUD_open_out audio/audio_template.h:503:14
#8 continue_dma8 hw/audio/sb16.c:216:20
#9 dma_cmd8 hw/audio/sb16.c:276:5
#10 command hw/audio/sb16.c:0
#11 dsp_write hw/audio/sb16.c:949:13
#12 portio_write softmmu/ioport.c:205:13
#13 memory_region_write_accessor softmmu/memory.c:491:5
#14 access_with_adjusted_size softmmu/memory.c:552:18
#15 memory_region_dispatch_write softmmu/memory.c:0:13
#16 flatview_write_continue softmmu/physmem.c:2759:23
#17 flatview_write softmmu/physmem.c:2799:14
#18 address_space_write softmmu/physmem.c:2891:18
#19 cpu_outw softmmu/ioport.c:70:5
[*] http://www.baudline.com/solutions/full_duplex/sb16_pci/index.html
OSS-Fuzz Report: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=29174
Fixes: 85571bc741 ("audio merge (malc)")
Buglink: https://bugs.launchpad.net/bugs/1910603
Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Reviewed-by: Qiang Liu <cyruscyliu@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210616104349.2398060-1-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When the management layer queries a binary built using --disable-tpm
for TPM devices, it gets confused by getting empty responses:
{ "execute": "query-tpm" }
{
"return": [
]
}
{ "execute": "query-tpm-types" }
{
"return": [
]
}
{ "execute": "query-tpm-models" }
{
"return": [
]
}
To make it clearer by returning an error:
- Make the TPM QAPI schema conditional
All of tpm.json is now 'if': 'defined(CONFIG_TPM)'.
- Adapt the HMP command
- Remove stubs which became unnecessary
The management layer now gets a 'CommandNotFound' error:
{ "execute": "query-tpm" }
{
"error": {
"class": "CommandNotFound",
"desc": "The command query-tpm has not been found"
}
}
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch moves assert_hvf_ok() and introduces generic build infrastructure.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-2-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit a14f0bf165 ("docs: convert build system documentation to rST")
converted docs/devel/build-system.txt to docs/devel/build-system.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/build-system.txt/build-system.rst/ \
$(git grep -l docs/devel/build-system.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210517151702.109066-4-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Only the TCG accelerator uses the TranslationBlock API.
Move the tb-context.h / tb-hash.h / tb-lookup.h from the
global namespace to the TCG one (in accel/tcg).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210524170453.3791436-3-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- various fixes for binfmt_misc docker images
- add hexagon check-tcg support docker image
- add tricore check-tcg support
- refactor ppc docker images
- add missing ppc64le tests
- don't use host_cc for test fallback
- check-tcg configure.sh tweaks for cross compile/clang
- fix some memory leaks in plugins
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmCjfMEACgkQ+9DbCVqe
KkQ+aQf/QX5prjX9IW64GzwmZLdgufrc9fwdbrhyNTglcS0gN/hti6is3gBhe9dU
KynWvmjvnosDT1EI53ciVkSRrwDLptpyq3bz140RjmSmPFQvUP16yF3KTThBxXuO
1BZk7iq5jzv3jVHD4j4zQPyMRatyBBToKtIboSZntljq6WTomv8gWu8+vdlWGzeG
0ubW1k9YHZNnQ0Et5xjqQBgBbjoOQvbkLYwNyyDjkOem8p4oKFIyTcRP9PYSJ9t3
cq314LuFJVjW1TMywvgHOlZEwzqRqOtdzW1RC1EbVqYR+lifAgYRI/kTEwL3Ab7j
Z+hybdzlfJdUPNiJ5Q4rjDpuKI+1Nw==
=FYwg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-plugin-updates-180521-2' into staging
testing and plugin updates:
- various fixes for binfmt_misc docker images
- add hexagon check-tcg support docker image
- add tricore check-tcg support
- refactor ppc docker images
- add missing ppc64le tests
- don't use host_cc for test fallback
- check-tcg configure.sh tweaks for cross compile/clang
- fix some memory leaks in plugins
# gpg: Signature made Tue 18 May 2021 09:37:21 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-plugin-updates-180521-2: (29 commits)
configure: use cc, not host_cc to set cross_cc for build arch
tests/tcg: don't allow clang as a cross compiler
tests/tcg: fix missing return
tests/tcg/ppc64le: tests for brh/brw/brd
tests/docker: gcc-10 based images for ppc64{,le} tests
tests/tcg/tricore: Add muls test
tests/tcg/tricore: Add msub test
tests/tcg/tricore: Add madd test
tests/tcg/tricore: Add ftoi test
tests/tcg/tricore: Add fmul test
tests/tcg/tricore: Add fadd test
tests/tcg/tricore: Add dvstep test
tests/tcg/tricore: Add clz test
tests/tcg/tricore: Add bmerge test
tests/tcg/tricore: Add macros to create tests and first test 'abs'
configure: Emit HOST_CC to config-host.mak
tests/tcg/tricore: Add build infrastructure
hw/tricore: Add testdevice for tests in tests/tcg/
tests/tcg: Run timeout cmds using --foreground
tests/tcg: Add docker_as and docker_ld cmds
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- vhost-user-blk: Fix error handling during initialisation
- Add test cases for the vhost-user-blk export
- Fix leaked Transaction objects
- qcow2: Expose dirty bit in 'qemu-img info'
-----BEGIN PGP SIGNATURE-----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=Xe4O
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
- vhost-user-blk: Fix error handling during initialisation
- Add test cases for the vhost-user-blk export
- Fix leaked Transaction objects
- qcow2: Expose dirty bit in 'qemu-img info'
# gpg: Signature made Tue 18 May 2021 11:57:46 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
vhost-user-blk: Check that num-queues is supported by backend
virtio: Fail if iommu_platform is requested, but unsupported
vhost-user-blk: Get more feature flags from vhost device
vhost-user-blk: Improve error reporting in realize
vhost-user-blk: Don't reconnect during initialisation
vhost-user-blk: Make sure to set Error on realize failure
vhost-user-blk-test: test discard/write zeroes invalid inputs
tests/qtest: add multi-queue test case to vhost-user-blk-test
test: new qTest case to test the vhost-user-blk-server
block/export: improve vu_blk_sect_range_ok()
block: Fix Transaction leak in bdrv_reopen_multiple()
block: Fix Transaction leak in bdrv_root_attach_child()
qcow2: set bdi->is_dirty
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test case has the same tests as tests/virtio-blk-test.c except for
tests have block_resize. Since the vhost-user-blk export only serves one
client one time, two exports are started by qemu-storage-daemon for the
hotplug test.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210309094106.196911-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210322092327.150720-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
this includes the Makefile and linker script to build all the tests.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-5-kbastian@mail.uni-paderborn.de>
Message-Id: <20210512102051.12134-15-alex.bennee@linaro.org>
This image is a little special because it takes a long time to build.
As such most users don't want to be doing that and just pull random
binaries from the ether as intended by the container gods. This
involves someone with credentials and a beefy machine running:
make docker-image-debian-hexagon-cross V=1 NOCACHE=1 J=30
docker tag qemu/debian-hexagon-cross registry.gitlab.com/qemu-project/qemu/qemu/debian-hexagon-cross
docker push registry.gitlab.com/qemu-project/qemu/qemu/debian-hexagon-cross
With a suitable binary in the "cloud" a normal user will run:
make docker-image-debian-hexagon-cross
or have it run for them through the dependency mechanism of our
over-engineered makefiles and get the binary they wanted. There are a
few wrinkles of course including needing to tweak the final image to
have the credentials of the user so we can actually do our cross
compiles.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Alessandro Di Federico <ale@rev.ng>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Brian Cain <bcain@quicinc.com>
Message-Id: <20210512102051.12134-7-alex.bennee@linaro.org>
With the introduction of the nvme-subsystem device we are really
cluttering up the hw/block directory.
As suggested by Philippe previously, move the nvme emulation to hw/nvme.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
This patch set adds a bus multiplexer and the necessary infrastructure
in the I2C code to allow it to work.
These are common on systems with lots of I2C devices, like an IPMI BMC.
-----BEGIN PGP SIGNATURE-----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=IamZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-v1' into staging
Add a bus multiplexer device
This patch set adds a bus multiplexer and the necessary infrastructure
in the I2C code to allow it to work.
These are common on systems with lots of I2C devices, like an IPMI BMC.
# gpg: Signature made Thu 13 May 2021 22:48:07 BST
# gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg: aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg: aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81
* remotes/cminyard/tags/for-qemu-6.1-v1:
hw/i2c: add pca954x i2c-mux switch
hw/i2c: move search to i2c_scan_bus method
hw/i2c: add match method for device search
hw/i2c: name I2CNode list in I2CBus
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As the 'Main Loop' section covers softmmu/icount.c,
add "exec/gen-icount.h" there too.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210422064128.2318616-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Clenaup some left over v1.9 code
- Documentation improvements
- Support for the shakti_c machine
- Internal cleanup of the CSR accesses
- Updates to the OpenTitan platform
- Support for the virtio-vga
- Fix for the saturate subtract in vector extensions
- Experimental support for the ePMP spec
- A range of other internal code cleanups and bug fixes
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmCaWaYACgkQIeENKd+X
cFS97Af/c+Zh5KddhY0qYm6/deabhzn2fPrensOX+UlQbThpbKLHPZ+ceh1GRYBl
tqfiQa6ByhLhHk4UihIjJvLL9UW+UUxR3zsUfHcFHGAmy22ms9oiGB+se37gj/YB
2WySYQhHlwW1iz+55mMh+c1wjckFFVjX4dQgh7pl60AJWxNdzNOBUr/BwMZUh0zM
UFsYDGS2MF3JId8VkW4Ui4fKTw0HBexK4gKXOsRIpF6R3+PQa3m4ppr/YZfyUy5W
o8lZhztoO5TgyGyNpCo6UdG9JlJP5iNnPRTn+ordqJhpNKFTLQeuLBW9gMpB9BiG
L1fvPePKz7GWxI/Xrl9uwNyWSYwetA==
=6TPt
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20210511' into staging
A large collection of RISC-V fixes, improvements and features
- Clenaup some left over v1.9 code
- Documentation improvements
- Support for the shakti_c machine
- Internal cleanup of the CSR accesses
- Updates to the OpenTitan platform
- Support for the virtio-vga
- Fix for the saturate subtract in vector extensions
- Experimental support for the ePMP spec
- A range of other internal code cleanups and bug fixes
# gpg: Signature made Tue 11 May 2021 11:17:10 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20210511: (42 commits)
target/riscv: Fix the RV64H decode comment
target/riscv: Consolidate RV32/64 16-bit instructions
target/riscv: Consolidate RV32/64 32-bit instructions
target/riscv: Remove an unused CASE_OP_32_64 macro
target/riscv: Remove the unused HSTATUS_WPRI macro
target/riscv: Remove the hardcoded SATP_MODE macro
target/riscv: Remove the hardcoded MSTATUS_SD macro
target/riscv: Remove the hardcoded HGATP_MODE macro
target/riscv: Remove the hardcoded SSTATUS_SD macro
target/riscv: Remove the hardcoded RVXLEN macro
target/riscv: fix a typo with interrupt names
fpu/softfloat: set invalid excp flag for RISC-V muladd instructions
hw/riscv: Fix OT IBEX reset vector
target/riscv: fix exception index on instruction access fault
target/riscv: fix vrgather macro index variable type bug
target/riscv: Add ePMP support for the Ibex CPU
target/riscv/pmp: Remove outdated comment
target/riscv: Add a config option for ePMP
target/riscv: Implementation of enhanced PMP (ePMP)
target/riscv: Add ePMP CSR access functions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Target unicore32 was deprecated in commit 8e4ff4a8d2, v5.2.0. See
there for rationale.
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-3-armbru@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
It was deprecated in commit e1c4269763, v5.2.0. See that commit
message for rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210501075747.3293186-1-armbru@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
There are no known users of this CPU anymore, and there are no
binaries available online which could be used for regression tests,
so the code has likely completely bit-rotten already. It's been
marked as deprecated since two releases now and nobody spoke up
that there is still a need to keep it, thus let's remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210430160355.698194-1-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Commit message typos fixed, trivial conflicts resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
* i386 page walk unification
* Fix detection of gdbus-codegen
* Misc refactoring
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCblEEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroObnQgAj10pRDODY9hIiUiYj2sTcEQTly3p
DC+ZWDaup67z3WV2C/vAS/x31RGIus+7bzji3fgtUcnGOr7sbuOCcs7CPY8mam5Y
GMPNrsUk2sZ5z9SVTq2vjEa61tjxtMpYXx9pnhgJzJAO4NJzNuX74ZdpA+oV5aTC
CvZDk8lC7BLU16MfeLcbw44xE4Oy05wWwaoP2pvhdOg47y85t/S9Il1yBCYi3y8C
pTOBBCYmHGPj/r7i4MhUGrAjIyGQu1w7av8nZXouRegoeVl28RKR8+pl7TfFpt+E
cp95yE8dPuNFJnCiZ3Kv01eBcSUcyp4gVb5H2Oa/nkkYRLpnONbUzYFtIA==
=zR5U
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* AccelCPUClass and sysemu/user split for i386 (Claudio)
* i386 page walk unification
* Fix detection of gdbus-codegen
* Misc refactoring
# gpg: Signature made Wed 12 May 2021 09:39:29 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (32 commits)
coverity-scan: list components, move model to scripts/coverity-scan
configure: fix detection of gdbus-codegen
qemu-option: support accept-any QemuOptsList in qemu_opts_absorb_qdict
main-loop: remove dead code
target/i386: use mmu_translate for NPT walk
target/i386: allow customizing the next phase of the translation
target/i386: extend pg_mode to more CR0 and CR4 bits
target/i386: pass cr3 to mmu_translate
target/i386: extract mmu_translate
target/i386: move paging mode constants from SVM to cpu.h
target/i386: merge SVM_NPTEXIT_* with PF_ERROR_* constants
accel: add init_accel_cpu for adapting accel behavior to CPU type
accel: move call to accel_init_interfaces
i386: make cpu_load_efer sysemu-only
target/i386: gdbstub: only write CR0/CR2/CR3/EFER for sysemu
target/i386: gdbstub: introduce aux functions to read/write CS64 regs
i386: split off sysemu part of cpu.c
i386: split seg_helper into user-only and sysemu parts
i386: split svm_helper into sysemu and stub-only user
i386: separate fpu_helper sysemu-only parts
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the RISC-V maintainers by removing Sagar and Bastian who haven't
been involved recently.
Also add Bin who has been helping with reviews.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 6564ba829c40ad9aa7d28f43be69d8eb5cf4b56b.1617749142.git.alistair.francis@wdc.com
This is the initial implementation of Shakti UART.
Signed-off-by: Vijai Kumar K <vijai@behindbytes.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210401181457.73039-4-vijai@behindbytes.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
i386 is the first user of AccelCPUClass, allowing to split
cpu.c into:
cpu.c cpuid and common x86 cpu functionality
host-cpu.c host x86 cpu functions and "host" cpu type
kvm/kvm-cpu.c KVM x86 AccelCPUClass
hvf/hvf-cpu.c HVF x86 AccelCPUClass
tcg/tcg-cpu.c TCG x86 AccelCPUClass
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio]:
Rebased on commit b8184135 ("target/i386: allow modifying TCG phys-addr-bits")
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210322132800.7470-5-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Here's the first ppc pull request for qemu-6.1. It has a wide variety
of stuff accumulated during the 6.0 freeze. Highlights are:
* Multi-phase reset cleanups for PAPR
* Preliminary cleanups towards allowing !CONFIG_TCG for the ppc target
* Cleanup of AIL logic and extension to POWER10
* Further improvements to handling of hot unplug failures on PAPR
* Allow much larger numbers of CPU on pseries
* Support for the H_SCM_HEALTH hypercall
* Add support for the Pegasos II board
* Substantial cleanup to hflag handling
* Assorted minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=N0qr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210504' into staging
ppc patch queue 2021-05-04
Here's the first ppc pull request for qemu-6.1. It has a wide variety
of stuff accumulated during the 6.0 freeze. Highlights are:
* Multi-phase reset cleanups for PAPR
* Preliminary cleanups towards allowing !CONFIG_TCG for the ppc target
* Cleanup of AIL logic and extension to POWER10
* Further improvements to handling of hot unplug failures on PAPR
* Allow much larger numbers of CPU on pseries
* Support for the H_SCM_HEALTH hypercall
* Add support for the Pegasos II board
* Substantial cleanup to hflag handling
* Assorted minor fixes and cleanups
# gpg: Signature made Tue 04 May 2021 06:52:39 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dg-gitlab/tags/ppc-for-6.1-20210504: (46 commits)
hw/ppc/pnv_psi: Use device_cold_reset() instead of device_legacy_reset()
hw/ppc/spapr_vio: Reset TCE table object with device_cold_reset()
hw/intc/spapr_xive: Use device_cold_reset() instead of device_legacy_reset()
target/ppc: removed VSCR from SPR registration
target/ppc: Reduce the size of ppc_spr_t
target/ppc: Clean up _spr_register et al
target/ppc: Add POWER10 exception model
target/ppc: rework AIL logic in interrupt delivery
target/ppc: move opcode table logic to translate.c
target/ppc: code motion from translate_init.c.inc to gdbstub.c
spapr_drc.c: handle hotunplug errors in drc_unisolate_logical()
spapr.h: increase FDT_MAX_SIZE
spapr.c: do not use MachineClass::max_cpus to limit CPUs
ppc: Rename current DAWR macros and variables
target/ppc: POWER10 supports scv
target/ppc: Fix POWER9 radix guest HV interrupt AIL behaviour
docs/system: ppc: Add documentation for ppce500 machine
roms/u-boot: Bump ppce500 u-boot to v2021.04 to fix broken pci support
roms/Makefile: Update ppce500 u-boot build directory name
ppc/spapr: Add support for implement support for H_SCM_HEALTH
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fixes for the DMA space
* New model for ASPEED's Hash and Crypto Engine (Joel and Klaus)
* Acceptance tests (Joel)
* A fix for the XDMA model
* Some extra features for the SMC controller.
* Two new boards : rainier-bmc and quanta-q7l1-bmc (Patrick)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmCPiNgACgkQUaNDx8/7
7KGqBhAAviQHW0A4UPGi91uGq6wN1V4skbdMJIGnvOVnkOH1aRySPfnwiRRYimpc
/3re+dLzu/zf/ehwdJd7nk3zLG2HR3A+Lw0fdBR2gGvuQwyUz/D+34yR43eJ8ju4
HcuOVfo9ZeSIJZPZTHfHD/0/AhNxKCUv7PiV2T3XukGcaiuQKbQIlfY73LDjIIkS
O5FT5IxknCXNWJ4eS8C04EsLzdkdxdZ1QsnaNyhLIywzdO5wThWQ6YE1AK1VPVES
yGiJMRXcXHDicmwru9jZIDG3jiiEO01FUG6hBTB2qA/OaXVark/uw55+qsEwRuEv
NYznDwEVwmN1CB5oGP+MbRlwyyJoirLlJ35FB3KC3OciZCRbrzHA1OtxsqlDf9eJ
K4j3M51CuhU5D9AJ+77BxZewHN2RugIvvlSyQ8FP+mbbvDIBbiiY3mkks7pLpgRh
U33HxOGmFNuSIYavlYD12OQcnimMv6Zqrf3WUikfredpXiY8UNAfxazQPpaCzNFq
DcjNKt6DcdXXSHthQiRhMbWLPl+Lw8dih8Y+cs/xRnjqySHl8eLLb0tFL7Dlkl0z
7yTLyt+A5UN8AKqYZTvGfsofa4RdaIoBq+CG5unQwzulpU5ndOpaUJcc9QhNV+rN
EtxvFEfiq9mDefg1kb2JW/W2ew22sr8fzhRJHnoIXGBJ2RtV+hc=
=N5Us
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20210503' into staging
Aspeed patches :
* Fixes for the DMA space
* New model for ASPEED's Hash and Crypto Engine (Joel and Klaus)
* Acceptance tests (Joel)
* A fix for the XDMA model
* Some extra features for the SMC controller.
* Two new boards : rainier-bmc and quanta-q7l1-bmc (Patrick)
# gpg: Signature made Mon 03 May 2021 06:23:36 BST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-aspeed-20210503:
aspeed: Add support for the quanta-q7l1-bmc board
hw/block: m25p80: Add support for mt25ql02g and mt25qu02g
aspeed: Add support for the rainier-bmc board
aspeed: Deprecate the swift-bmc machine
tests/qtest: Rename m25p80 test in aspeed_smc test
aspeed/smc: Add extra controls to request DMA
aspeed/smc: Add a 'features' attribute to the object class
hw/misc/aspeed_xdma: Add AST2600 support
tests/acceptance: Test ast2600 machine
tests/acceptance: Test ast2400 and ast2500 machines
tests/qtest: Add test for Aspeed HACE
aspeed: Integrate HACE
hw: Model ASPEED's Hash and Crypto Engine
hw/arm/aspeed: Do not sysbus-map mmio flash region directly, use alias
aspeed/i2c: Rename DMA address space
aspeed/i2c: Fix DMA address mask
aspeed/smc: Remove unused "sdram-base" property
aspeed/smc: Use the RAM memory region for DMAs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the Kconfig 'USB' value is not selected, it is pointless to
build the USB core components. Add a stub for the HMP commands
and usbdevice_create() which is called by usb_device_add in
softmmu/vl.c.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210424224110.3442424-3-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add new machine called pegasos2 emulating the Genesi/bPlan Pegasos II,
a PowerPC board based on the Marvell MV64361 system controller and the
VIA VT8231 integrated south bridge/superio chips. It can run Linux,
AmigaOS and a wide range of MorphOS versions. Currently a firmware ROM
image is needed to boot and only MorphOS has a video driver to produce
graphics output. Linux could work too but distros that supported this
machine don't include usual video drivers so those only run with
serial console for now.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <30cbfb9cbe6f46a1e15a69a75fac45ac39340122.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move sysemu-specific files under the new sysemu/ subfolder
and adapt the Meson machinery.
Update the KVM MIPS entry in MAINTAINERS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-17-f4bug@amsat.org>
This adds a test for the Aspeed Hash and Crypto (HACE) engine. It tests
the currently implemented behavior of the hash functionality.
The tests are similar, but are cut/pasted instead of broken out into a
common function so the assert machinery produces useful output when a
test fails.
Co-developed-by: Cédric Le Goater <clg@kaod.org>
Co-developed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210409000253.1475587-4-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add simple transaction API to use in further update of block graph
operations.
Supposed usage is:
- "prepare" is main function of the action and it should make the main
effect of the action to be visible for the following actions, keeping
possibility of roll-back, saving necessary things in action state,
which is prepended to the action list (to do that, prepare func
should call tran_add()). So, driver struct doesn't include "prepare"
field, as it is supposed to be called directly.
- commit/rollback is supposed to be called for the list of action
states, to commit/rollback all the actions in reverse order
- When possible "commit" should not make visible effect for other
actions, which make possible transparent logical interaction between
actions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-9-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The pca954x is an i2c mux, and this adds support for two variants of
this device: the pca9546 and pca9548.
This device is very common on BMCs to route a different channel to each
PCIe i2c bus downstream from the BMC.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-Id: <20210412194522.664594-5-venture@google.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Use the autogenerated fuzzer test cases as the basis for a set of am53c974
regression tests.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-13-mark.cave-ayland@ilande.co.uk>
Remove the docs/specs/nvme.txt and replace it with proper documentation
in docs/system/nvme.rst.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Remove Peter Chubb as i/MX31 maintainer.
I'm leaving my current job and will no longer have access to the
hardware to test or maintain this port.
Signed-off-by: Peter Chubb <peter.chubb@data61.csiro.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Some small documentation updates
* Some small misc fixes
-----BEGIN PGP SIGNATURE-----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=nOMd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-04-01' into staging
* Updates for the MAINTAINERS file
* Some small documentation updates
* Some small misc fixes
# gpg: Signature made Thu 01 Apr 2021 13:30:39 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2021-04-01:
device-crash-test: Ignore errors about a bus not being available
docs: Fix typo in the default name of the qemu-system-x86_64 binary
docs: Remove obsolete paragraph about config-target.mak
util/compatfd.c: Fixed style issues
qom: Fix default values in help
MAINTAINERS: Mark SH-4 hardware emulation orphan
MAINTAINERS: Mark RX hardware emulation orphan
MAINTAINERS: add virtio-fs mailing list
MAINTAINERS: Drop the line with Xiang Zheng
MAINTAINERS: replace Huawei's email to personal one
MAINTAINERS: Drop the lines with Sarah Harris
MAINTAINERS: add/replace backups for some s390 areas
MAINTAINERS: Fix tests/migration maintainers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Yoshinori Sato doesn't have time to manage QEMU reviews.
The code is in good shape and hasn't started to bitrot,
so mark the SH-4 hardware as orphan to give the possibility
to any contributor to step in and fill the gap.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
CC: Magnus Damm <magnus.damm@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20210312155513.1849109-3-f4bug@amsat.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Yoshinori Sato doesn't have time to manage QEMU reviews.
The code is in good shape and hasn't started to bitrot,
so mark the RX target and hardware as orphan to give the
possibility to any contributor to step in and fill the gap.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20210312155513.1849109-2-f4bug@amsat.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
General discussion and patch reviews take place on this list for both
virtiofsd (tools/virtiofsd/*) and the guest kernel module.
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20210318154157.1357224-1-ckuehl@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When sending a mail with CC: to zhengxiang9@huawei.com I got a mail
back saying:
Your message couldn't be delivered
The message you sent to zhengxiang9@huawei.com couldn't be delivered due to:
Recipient email address is possibly incorrect.
Further information
5.1.1 <zhengxiang9@huawei.com>: Recipient address rejected: Failed recipient
validation check.: host 127.0.0.1[127.0.0.1] said: 554 5.7.1 recipient verify
from ldap failed (in reply to RCPT TO command)
Looks like this address does not exist anymore, thus drop it from the
MAINTAINERS file.
Message-Id: <20210401065343.3197791-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In order to conveniently receive email, replace the Huawei
email address with my personal one.
Signed-off-by: Dongjiu Geng <gengdongjiu1@gmail.com>
Message-Id: <1615462144-10864-1-git-send-email-gengdongjiu1@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In a mail to the qemu-devel mailing list, Sarah wrote:
"I was added as a reviewer (in MAINTAINERS) for the AVR target for the
duration of my research work using it.
The funding for my project expires in the middle of April, so I will not be
able to provide time for reviewing patches from that point."
Thus let's remove the corresponding lines in the MAINTAINERS file.
Message-Id: <20210401062426.3192118-1-thuth@redhat.com>
Reviewed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Yank now only depends on util and can be always linked in. Also remove
the stubs as they are not needed anymore.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <997aa12a28c555d8a3b7a363b3bda5c3cf1821ba.1616521341.git.lukasstraub2@web.de>
Remove dependency on qiochannel by removing yank_generic_iochannel and
letting migration and chardev use their own yank function for
iochannel.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20ff143fc2db23e27cd41d38043e481376c9cec1.1616521341.git.lukasstraub2@web.de>
S390 PCI currently has no backup, add one. Add an additional backup
for vfio-ccw and refresh the backup for vfio-ap.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <1616680509-8339-1-git-send-email-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
when executing the following scripts, it throw error message:
$ ./scripts/get_maintainer.pl -f tests/migration/guestperf.py
get_maintainer.pl: No maintainers found, printing recent contributors.
get_maintainer.pl: Do not blindly cc: them on patches! Use common sense.
add the tests/migration to the "Migration" section of MAINTAINERS
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <91d5978357fb8709ef61d2030984f7142847037d.1616141556.git.huangy81@chinatelecom.cn>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It may be arm-compat-semihosting but more than one architecture uses
it so lets move the tests into the multiarch area. We gate it on the
feature and split the semicall.h header between the arches.
Also clean-up a bit of the Makefile messing about to one common set of
runners.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323165308.15244-6-alex.bennee@linaro.org>
In bbc17caf81, we used an alias attribute to allow target_page
to be declared const, and yet be initialized late.
This fails when using LTO with several versions of gcc.
The compiler looks through the alias and decides that the const
variable is statically initialized to zero, then propagates that
zero to many uses of the variable.
This can be avoided by compiling one object file with -fno-lto.
In this way, any initializer cannot be seen, and the constant
propagation does not occur.
Since we are certain to have this separate compilation unit, we
can drop the alias attribute as well. We simply have differing
declarations for target_page in different compilation units.
Drop the use of init_target_page, and drop the configure detection
for CONFIG_ATTRIBUTE_ALIAS.
In order to change the compilation flags for a file with meson,
we must use a static_library. This runs into specific_ss, where
we would need to create many static_library instances.
Fix this by splitting page-vary.c: the page-vary-common.c part is
compiled once as a static_library, while the page-vary.c part is
left in specific_ss in order to handle the target-specific value
of TARGET_PAGE_BITS_MIN.
Reported-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210321211534.2101231-1-richard.henderson@linaro.org>
[PMD: Fix typo in subject, split original patch in 3]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20210322112427.4045204-4-f4bug@amsat.org>
[rth: Update MAINTAINERS]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
exec-vary.c is about variable page size handling,
rename it page-vary.c. Currently this file is target
specific (built once for each target), comment this.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210322112427.4045204-2-f4bug@amsat.org>
[rth: Update MAINTAINERS]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For testing, it can be useful to simulate an enormous amount of memory
(e.g. 2^64 RAM). This adds an MMIO device that acts as sparse memory.
When something writes a nonzero value to a sparse-mem address, we
allocate a block of memory. For now, since the only user of this device
is the fuzzer, we do not track and free zeroed blocks. The device has a
very low priority (so it can be mapped beneath actual RAM, and virtual
device MMIO regions).
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we started to commit the fuzzer QTest reproducers to
fuzz-test.c in commit d8dd109501 ("qtest: add fuzz test case"),
we forgot to add the corresponding MAINTAINERS entry. Do it now.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test fails when QEMU is built without the virtio-scsi device,
restrict it to its availability.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test fails when QEMU is built without the megasas device,
restrict it to its availability.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210202155611.998424-1-philmd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The machine is based on Goldfish interfaces defined by Google
for Android simulator. It uses Goldfish-rtc (timer and RTC),
Goldfish-pic (PIC) and Goldfish-tty (for serial port and early tty).
The machine is created with 128 virtio-mmio bus, and they can
be used to use serial console, GPU, disk, NIC, HID, ...
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210312214145.2936082-6-laurent@vivier.eu>
Extract the VT82C686 PCI UHCI function into a new unit so
it is only build when the VT82C686 south bridge is selected.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210309190802.830969-4-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* Clean-up and improve gitlab-ci jobs
* Drop the non-working "check-speed" makefile target
* Minor documentation updates
-----BEGIN PGP SIGNATURE-----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=YxBC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-03-12' into staging
* Move unit and bench tests into separate directories
* Clean-up and improve gitlab-ci jobs
* Drop the non-working "check-speed" makefile target
* Minor documentation updates
# gpg: Signature made Fri 12 Mar 2021 17:18:45 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2021-03-12:
README: Add Documentation blurb
MAINTAINERS: Merge the Gitlab-CI section into the generic CI section
tests: remove "make check-speed" in favor of "make bench"
gitlab-ci.yml: Merge check-crypto-old jobs into the build-crypto-old jobs
gitlab-ci.yml: Merge one of the coroutine jobs with the tcg-disabled job
gitlab-ci.yml: Add some missing dependencies to the jobs
gitlab-ci.yml: Move build-tools-and-docs-debian to a better place
tests: Move benchmarks into a separate folder
tests: Move unit tests into a separate directory
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The status of the gitlab-CI files is currently somewhat confusing, and
it is often not quite clear whether a patch should go via my tree or
via the testing tree of Alex. That situation has grown historically...
Initially, I was the only one using the gitlab-CI, just for my private
repository there. But in the course of time, the gitlab-CI switched to
use the containers from tests/docker/ (which is not part of the gitlab-CI
section in the MAINTAINERS file), and QEMU now even switched to gitlab.com
completely for the repository and will soon use it as its gating CI, too,
so it makes way more sense if the gitlab-ci.yml files belong to the people
who are owning the qemu-project on gitlab.com and take care of the gitlab
CI there. Thus let's merge the gitlab-ci section into the common "test and
build automation" section.
And while we're at it, I'm also removing the line with Fam there for now,
since he was hardly active during the last years in this area anymore.
If he ever gets more time for this part again in the future, we surely
can add the line back again. I'm also removing the Patchew URL from this
section now since Patchew's files are not tracked in the main QEMU repo
and it is also not maintained by Alex, Philippe and myself.
The maintainers of Patchew are still listed more accurately in the wiki on
https://wiki.qemu.org/AdminContacts & https://wiki.qemu.org/Testing/CI/Patchew
instead.
Now to avoid that Alex is listed here in this section alone, Philippe and
I agreed to help as backup maintainers here, too. And Willian volunteered
to be an additional reviewer.
Message-Id: <20210309112356.737266-1-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Fam Zheng <fam@euphon.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Make it clear that these files are related to benchmarks by moving
them into a new folder called "bench".
Message-Id: <20210312092238.79509-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The main tests directory still looks very crowded, and it's not
clear which files are part of a unit tests and which belong to
a different test subsystem. Let's clean up the mess and move the
unit tests to a separate directory.
Message-Id: <20210310063314.1049838-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
