Rd32,Pe4 = sfinvsqrta(Rs32)
Square root approx
The helper packs the 2 32-bit results into a 64-bit value,
and the fGEN_TCG override unpacks them into the proper results.
Test cases in tests/tcg/hexagon/multi_result.c
FP exception tests added to tests/tcg/hexagon/fpstuff.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-19-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rd32,Pe4 = sfrecipa(Rs32, Rt32)
Recripocal approx
Test cases in tests/tcg/hexagon/multi_result.c
FP exception tests added to tests/tcg/hexagon/fpstuff.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-18-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the proper return for helpers that convert to unsigned
Remove target/hexagon/conv_emu.[ch]
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-13-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Multiple writes to the same preg are and'ed together. Rather than
generating a runtime check, we can determine at TCG generation time
if the predicate has previously been written in the packet.
Test added to tests/tcg/hexagon/misc.c
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-7-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The m25p80 test depends on the Aspeed SMC controller to test our
SPI-NOR flash support. Reflect this dependency by changing the name.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210407171637.777743-17-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This tests a Debian multi-soc arm32 Linux kernel on the AST2600 based
Tacoma BMC machine.
There is no root file system so the test terminates when boot reaches
the stage where it attempts and fails to mount something.
Cc: Cleber Rosa <crosa@redhat.com>
Cc: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
[ clg : - removed comment
- removed ending self.vm.shutdown() ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210304123951.163411-3-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210407171637.777743-13-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Test MTD images from the OpenBMC project on AST2400 and AST2500 SoCs
from ASPEED, by booting Palmetto and Romulus BMC machines.
The images are fetched from OpenBMC's release directory on github.
Cc: Cleber Rosa <crosa@redhat.com>
Cc: Wainer dos Santos Moschetta <wainersm@redhat.com>
Co-developed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
[ clg : - removed comment
- removed ending self.vm.shutdown() ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210304123951.163411-2-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210407171637.777743-12-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This adds a test for the Aspeed Hash and Crypto (HACE) engine. It tests
the currently implemented behavior of the hash functionality.
The tests are similar, but are cut/pasted instead of broken out into a
common function so the assert machinery produces useful output when a
test fails.
Co-developed-by: Cédric Le Goater <clg@kaod.org>
Co-developed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210409000253.1475587-4-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Prior to this commit, specifying a non-object value here causes the QAPI
parser to crash in expr.py with a stack trace with (likely) an
AttributeError when we attempt to call that value's items() method.
This member needs to be an object (Dict), and not anything else. Add a
check for this with a nicer error message, and formalize that check with
new test cases that exercise that error.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now, bdrv_node_check_perm() is called only with fresh cumulative
permissions, so its actually "refresh_perm".
Move permission calculation to the function. Also, drop unreachable
error message and rewrite the remaining one to be more generic (as now
we don't know which node is added and which was already here).
Add also Virtuozzo copyright, as big work is done at this point.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-37-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We don't need this workaround anymore: bdrv_append is already smart
enough and we can use new bdrv_drop_filter().
This commit efficiently reverts also recent 705dde27c6, which
checked .active on io path. Still it said that the problem should be
theoretical. And the logic of filter removement is changed anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-25-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_append is not very good for inserting filters: it does extra
permission update as part of bdrv_set_backing_hd(). During this update
filter may conflict with other parents of top_bs.
Instead, let's first do all graph modifications and after it update
permissions.
append-greedy-filter test-case in test-bdrv-graph-mod is now works, so
move it out of debug option.
Note: bdrv_append() is still only works for backing-child based
filters. It's something to improve later.
Note2: we use the fact that bdrv_append() is used to append new nodes,
without backing child, so we don't need frozen check and inherits_from
logic from bdrv_set_backing_hd().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-22-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Split out no-perm part of bdrv_root_attach_child() into separate
transaction action. bdrv_root_attach_child() now moves to new
permission update paradigm: first update graph relations then update
permissions.
qsd-jobs test output updated. Seems now permission update goes in
another order. Still, the test comment say that we only want to check
that command doesn't crash, and it's still so.
Error message is a bit misleading as it looks like job was added first.
But actually in new paradigm of graph update we can't distinguish such
things. We should update the error message, but let's not do it now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210428151804.439460-19-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
inore_children thing doesn't help to track all propagated permissions
of children we want to ignore. The simplest way to correctly update
permissions is update graph first and then do permission update. In
this case we just referesh permissions for the whole subgraph (in
topological-sort defined order) and everything is correctly calculated
automatically without any ignore_children.
So, refactor bdrv_replace_node_common to first do graph update and then
refresh the permissions.
Test test_parallel_exclusive_write() now pass, so move it out of
debugging "if".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-18-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rewrite bdrv_check_perm(), bdrv_abort_perm_update() and bdrv_set_perm()
to update nodes in topological sort order instead of simple DFS. With
topologically sorted nodes, we update a node only when all its parents
already updated. With DFS it's not so.
Consider the following example:
A -+
| |
| v
| B
| |
v |
C<-+
A is parent for B and C, B is parent for C.
Obviously, to update permissions, we should go in order A B C, so, when
we update C, all parent permissions already updated. But with current
approach (simple recursion) we can update in sequence A C B C (C is
updated twice). On first update of C, we consider old B permissions, so
doing wrong thing. If it succeed, all is OK, on second C update we will
finish with correct graph. But if the wrong thing failed, we break the
whole process for no reason (it's possible that updated B permission
will be less strict, but we will never check it).
Also new approach gives a way to simultaneously and correctly update
several nodes, we just need to run bdrv_topological_dfs() several times
to add all nodes and their subtrees into one topologically sorted list
(next patch will update bdrv_replace_node() in this manner).
Test test_parallel_perm_update() is now passing, so move it out of
debugging "if".
We also need to support ignore_children in
bdrv_parent_perms_conflict()
For test 283 order of conflicting parents check is changed.
Note also that in bdrv_check_perm() we don't check for parents conflict
at root bs, as we may be in the middle of permission update in
bdrv_reopen_multiple(). bdrv_reopen_multiple() will be updated soon.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-14-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have too much comments for this feature. It seems better just don't
do it. Most of real users (tests don't count) have to create additional
reference.
Drop also comment in external_snapshot_prepare:
- bdrv_append doesn't "remove" old bs in common sense, it sounds
strange
- the fact that bdrv_append can fail is obvious from the context
- the fact that we must rollback all changes in transaction abort is
known (it's the direct role of abort)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_append() is not quite good for inserting filters: it does extra
permission update in intermediate state, where filter get it filtered
child but is not yet replace it in a backing chain.
Some filters (for example backup-top) may want permissions even when
have no parents. And described intermediate state becomes invalid.
That's (half a) reason, why we need "inactive" state for backup-top
filter.
bdrv_append() will be improved later, now let's add a unit test.
Now test fails, so it runs only with -d flag. To run do
./test-bdrv-graph-mod -d -p /bdrv-graph-mod/append-greedy-filter
from <build-directory>/tests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-4-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add test to show that simple DFS recursion order is not correct for
permission update. Correct order is topological-sort order, which will
be introduced later.
Consider the block driver which has two filter children: one active
with exclusive write access and one inactive with no specific
permissions.
And, these two children has a common base child, like this:
┌─────┐ ┌──────┐
│ fl2 │ ◀── │ top │
└─────┘ └──────┘
│ │
│ │ w
│ ▼
│ ┌──────┐
│ │ fl1 │
│ └──────┘
│ │
│ │ w
│ ▼
│ ┌──────┐
└───────▶ │ base │
└──────┘
So, exclusive write is propagated.
Assume, we want to make fl2 active instead of fl1.
So, we set some option for top driver and do permission update.
If permission update (remember, it's DFS) goes first through
top->fl1->base branch it will succeed: it firstly drop exclusive write
permissions and than apply them for another BdrvChildren.
But if permission update goes first through top->fl2->base branch it
will fail, as when we try to update fl2->base child, old not yet
updated fl1->base child will be in conflict.
Now test fails, so it runs only with -d flag. To run do
./test-bdrv-graph-mod -d -p /bdrv-graph-mod/parallel-perm-update
from <build-directory>/tests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the test that shows that concept of ignore_children is incomplete.
Actually, when we want to update something, ignoring permission of some
existing BdrvChild, we should ignore also the propagated effect of this
child to the other children. But that's not done. Better approach
(update permissions on already updated graph) will be implemented
later.
Now the test fails, so it's added with -d argument to not break make
check.
Test fails with
"Conflicts with use by fl1 as 'backing', which does not allow 'write' on base"
because when updating permissions we can ignore original top->fl1
BdrvChild. But we don't ignore exclusive write permission in fl1->base
BdrvChild, which is propagated. Correct thing to do is make graph
change first and then do permission update from the top node.
To run test do
./test-bdrv-graph-mod -d -p /bdrv-graph-mod/parallel-exclusive-write
from <build-directory>/tests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use the autogenerated fuzzer test cases as the basis for a set of am53c974
regression tests.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-13-mark.cave-ayland@ilande.co.uk>
Using mprotect() to change PROT_* does not change the MAP_ANON
previously set with mmap(). Our linux-user version of MTE only
works with MAP_ANON pages, so losing PAGE_ANON caused MTE to
stop working.
Reported-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a job that remains on STANDBY after a drained section, and see
that invoking job_wait_unpaused() will get it unstuck.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210409120422.144040-5-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test accompanying commit 53431b9086
("block/mirror: Fix mirror_top's permissions").
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210331122815.51491-1-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just demonstrate one of x-blockdev-reopen usecases. We can't simply
remove persistent bitmap from RO node (for example from backing file),
as we need to remove it from the image too. So, we should reopen the
node first.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210401161522.8001-1-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The job may or may not be ready before the 'quit' is issued. Whether it
is is irrelevant; for the purpose of the test, it only needs to still be
there. Filter the job status change and READY events from the output so
it becomes reliable.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210401132839.139939-1-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJgbs4gAAoJEO8Ells5jWIRvgAIAJjpj9ptxEfEAisTeU7IMNPk
vFyf9aBj/QBPv8VmcC90Mz/x38bMn0zE6V9E53camA7s1YtLxWj5ZG9wvj0ExJB9
jgk4kEm5gpj8LY7/GwECNffaITQtLZgE4HVP98dVG9o1+5iCkZf8RnXAQH2ckzTs
WoYuM0Glgj0XXdBauvpEkidQ+q23cOw7ipxNseI5wxZBAZt0RGdXoO6Dh+S219ro
kFoDwzZS9tnuwpzzZJefQJuRWkUm1LsZ6rwC7Yd+gpk2Yt+fLGihF4dc0se2+SE1
jeq7fV1E62PvEs2GJx4hs3rqakcBDE4Bf83sZnbFKMVpuvFUh+mXcKaIfXABDi8=
=3d/N
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Thu 08 Apr 2021 10:34:24 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap-win32: correctly recycle buffers
Revert "qapi: net: Add query-netdev command"
Revert "tests: Add tests for query-netdev command"
Revert "net: Move NetClientState.info_str to dynamic allocations"
Revert "hmp: Use QAPI NetdevInfo in hmp_info_network"
Revert "net: Do not fill legacy info_str for backends"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A seg fix in virtiofsd, a bunch of fixes for background snapshots, and
a migration test fix.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
v2
Fix for !linux build
-----BEGIN PGP SIGNATURE-----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=FKJ4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210407b' into staging
V2 migration+virtiofs fixes pull 2021-04-07
A seg fix in virtiofsd, a bunch of fixes for background snapshots, and
a migration test fix.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
v2
Fix for !linux build
# gpg: Signature made Wed 07 Apr 2021 18:53:13 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20210407b:
tests/migration: fix parameter of auto-converge migration
migration: Rename 'bs' to 'block' in background snapshot code
migration: Pre-fault memory before starting background snasphot
migration: Inhibit virtio-balloon for the duration of background snapshot
migration: Fix missing qemu_fflush() on buffer file in bg_migration_thread
virtiofsd: Fix security.capability comparison
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- fix x86_64 cross compilers
- don't use registry for non-x86 containers
- add valid host types for given cross compile containers
- clean up i386 code16 test with explicit -no-pie
- relax sha1.py gdbstub test
- add more gdbstub documentation
- remove annoying warning on gitlab
- test dtrace backend in gitlab
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmBsdnkACgkQ+9DbCVqe
KkTnWAf/R7dkCJD9haKG1BHYfKxXtDsUxwa99Ep+C+8xRIbfMqjnHJl4YBaXvkcS
OeiPXJ4FFo36ZDusM4cJUzmB3Jr3OBN6Q33BTOIJfbrNunKfgUgVlc5LWy9AlFcN
3Pz5GyTDJIH/1BC+NzzHFq0KWMXgtNX/uGyJpeAD7Hqv6QtPJ82R1sGMRuLa2ep2
KuFVuLRSFdo37U6rxyRlbgIgC29lbKwR5fp/AQMTHT/a6qpsVPX7jOD53U07x/sY
45NWftzw8dQsOufdXRNCt/qq7TJ94KfIOWU6pNnFxBmuuJq4QxrObYwxZyylhmie
AEbA6lT8hdak21DYbRf8UQTItIB2qg==
=4j4F
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-6.0-rc2-fixes-060421-1' into staging
Testing updates:
- fix x86_64 cross compilers
- don't use registry for non-x86 containers
- add valid host types for given cross compile containers
- clean up i386 code16 test with explicit -no-pie
- relax sha1.py gdbstub test
- add more gdbstub documentation
- remove annoying warning on gitlab
- test dtrace backend in gitlab
# gpg: Signature made Tue 06 Apr 2021 15:55:53 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-6.0-rc2-fixes-060421-1:
gitlab-ci.yml: Test the dtrace backend in one of the jobs
gitlab-ci.yml: Fix the filtering for the git submodules
docs/system/gdb.rst: Document how to debug multicore machines
docs/system/gdb.rst: Add some more heading structure
tests/tcg: relax the next step precision of the gdb sha1 test
tests/tcg/i386: force -fno-pie for test-i386
tests/tcg/i386: expand .data sections for system tests
tests/tcg/configure.sh: make sure we pick up x86_64 cross compilers
tests/tcg: add concept of container_hosts
tests/docker: don't set DOCKER_REGISTRY on non-x86_64
tests/tcg: update the defaults for x86 compilers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Several issues has been reported for query-netdev series. Consider
it's late in the rc, this reverts commit
3c3b656885.
Signed-off-by: Jason Wang <jasowang@redhat.com>
when execute the following test command:
$ ./guestperf-batch.py --auto-converge \
--auto-converge-step {percent} ...
test aborts and error message be throwed as the following:
"Parameter 'x-cpu-throttle-increment' is unexpected"
The reason is that 'x-cpu-throttle-increment' has been
deprecated and 'cpu-throttle-increment' was introduced
Since v2.7. Use the new parameter instead.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <0195d34a317ce3cc417b3efd275e30cad35a7618.1616513998.git.huangy81@chinatelecom.cn>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We are using the dtrace backend in downstream RHEL, so testing this
in the CentOS 8 task seems to be a good fit.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210331160351.3071279-1-thuth@redhat.com>
Message-Id: <20210401102530.12030-12-alex.bennee@linaro.org>
Depending on the version of gdb we may not execute the first line of
SHA1Init when executing the first "next" command - instead just
stepping over the preamble. As we don't actually care about the
position of the PC after the steps and want to be sure the
context->state[] has been loaded before we inspect it do a double next
at the start.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-8-alex.bennee@linaro.org>
The containerised compiler defaults to no-pie anyway but if we are
relying on the users installed cross compiler we need to check it
works for building 16 bit code first.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210401102530.12030-7-alex.bennee@linaro.org>
Newer compilers might end up putting some data in .data.rel.local
which was getting skipped resulting in hilarious confusion on some
tests. Fix that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210401102530.12030-6-alex.bennee@linaro.org>
While it's hard to find cross compilers packaged for arches other than
x86_64 the same cannot be said for the x86_64 compiler which is
available on Debians i386, arm64 and ppc64el release architectures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-5-alex.bennee@linaro.org>
While docker is nominally multiarch these days it doesn't mean our
distros actually package all cross compilers for all architectures.
The upcoming Debian bullseye release will improve things further. At
least for now we can get things like the 32 bit ARM compiler on it's
64 bit cousin.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-4-alex.bennee@linaro.org>
Currently our gitlab registry is x86_64 only so attempting to pull an
image from it on something else will end in tears.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210401102530.12030-3-alex.bennee@linaro.org>
You don't usually notice this is broken on developer system on x86 as
we use the normal host compiler. However on other systems the -pc was
extraneous. Also for 32 bit only i686 packages exist now so we should
use those when available.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210401102530.12030-2-alex.bennee@linaro.org>
After introducing non-scalar machine properties, it would be preferrable
to have a single acpitable property which includes both generic
information (such as the OEM ids) and custom tables currently
passed via -acpitable.
Do not saddle ourselves with legacy oem-id and oem-table-id
properties, instead mark them as experimental.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210402082128.13854-1-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
V2:
- "tests: Add tests for yank with the chardev-change case" updated
- drop the readthedoc theme patch
-----BEGIN PGP SIGNATURE-----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=UwXe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/marcandre/tags/for-6.0-pull-request' into staging
For 6.0 misc patches under my radar.
V2:
- "tests: Add tests for yank with the chardev-change case" updated
- drop the readthedoc theme patch
# gpg: Signature made Thu 01 Apr 2021 12:54:52 BST
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/marcandre/tags/for-6.0-pull-request:
tests: Add tests for yank with the chardev-change case
chardev: Fix yank with the chardev-change case
chardev/char.c: Always pass id to chardev_new
chardev/char.c: Move object_property_try_add_child out of chardev_new
yank: Always link full yank code
yank: Remove dependency on qiochannel
docs: simplify each section title
dbus-vmstate: Increase the size of input stream buffer used during load
util: fix use-after-free in module_load_one
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test that rwlock upgrade is fair, and that readers go back to sleep if
a writer is in line.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210325112941.365238-6-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* hw/display/xlnx_dp: Free FIFOs adding xlnx_dp_finalize()
* hw/arm/smmuv3: Drop unused CDM_VALID() and is_cd_valid()
* target/arm: Make number of counters in PMCR follow the CPU
* hw/timer/renesas_tmr: Add default-case asserts in read_tcnt()
-----BEGIN PGP SIGNATURE-----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=4GT6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210330' into staging
* net/npcm7xx_emc.c: Fix handling of receiving packets when RSDR not set
* hw/display/xlnx_dp: Free FIFOs adding xlnx_dp_finalize()
* hw/arm/smmuv3: Drop unused CDM_VALID() and is_cd_valid()
* target/arm: Make number of counters in PMCR follow the CPU
* hw/timer/renesas_tmr: Add default-case asserts in read_tcnt()
# gpg: Signature made Tue 30 Mar 2021 14:23:33 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210330:
hw/timer/renesas_tmr: Add default-case asserts in read_tcnt()
target/arm: Make number of counters in PMCR follow the CPU
hw/arm/smmuv3: Drop unused CDM_VALID() and is_cd_valid()
hw/display/xlnx_dp: Free FIFOs adding xlnx_dp_finalize()
net/npcm7xx_emc.c: Fix handling of receiving packets when RSDR not set
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Three test cases:
(1) Adding a qcow2 (metadata) file to an existing data file, see whether
we can read the existing data through the qcow2 image.
(2) Append data to the data file, grow the qcow2 image accordingly, see
whether we can read the new data through the qcow2 image.
(3) At runtime, add a backing image to a freshly created qcow2 image
with an external data file (with data-file-raw). Reading data from
the qcow2 image must return the same result as reading data from the
data file, so everything in the backing image must be ignored.
(This did not use to be the case, because without the L2 tables
preallocated, all clusters would appear as unallocated, and so the
qcow2 driver would fall through to the backing file.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210326145509.163455-3-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Setting the qcow2 data-file-raw bit means that you can ignore the
qcow2 metadata when reading from the external data file. It does not
mean that you have to ignore it, though. Therefore, the data read must
be the same regardless of whether you interpret the metadata or whether
you ignore it, and thus the L1/L2 tables must all be present and give a
1:1 mapping.
This patch changes 244's output: First, the qcow2 file is larger right
after creation, because of metadata preallocation. Second, the qemu-img
map output changes: Everything that was not explicitly discarded or
zeroed is now a data area.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210326145509.163455-2-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For its concurrent requests, 046 has always filtered the offset,
probably because concurrent requests may settle in any order. However,
it did not filter the request length, and so if requests with different
lengths settle in an unexpected order (notably the longer request before
the shorter request), the test fails (for no good reason).
Filter the length, too.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200918153323.108932-1-mreitz@redhat.com>
15ce94a68c ("block/qed: bdrv_qed_do_open: deal with errp") has improved
the qed driver's error reporting, though sadly did not add a test for
it.
The good news are: There already is such a test, namely 116.
The bad news are: Its reference output was not adjusted, and so now it
fails.
Let's fix the reference output, which has the nice side effect of
demonstrating 15ce94a68ca's improvements.
Fixes: 15ce94a68c
("block/qed: bdrv_qed_do_open: deal with errp")
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210326141419.156831-1-mreitz@redhat.com>
A patch was recently applied that touched up some error messages that
pertained to key names like 'node-name'. The trouble is it only updated
tests/qemu-iotests/051.pc.out and not tests/qemu-iotests/051.out as
well.
Do that now.
Fixes: 785ec4b1b9 ("block: Clarify error messages pertaining to
'node-name'")
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Message-Id: <20210318200949.1387703-2-ckuehl@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There is an typo in iotest 051, correct it.
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20210324084321.90952-1-tao3.xu@intel.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This dirty bitmap fix solves a crash that can be triggered in the destination
QEMU process during live migration.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmBbUfMACgkQnKSrs4Gr
c8hTrgf/f0yUnW6NT6yCPpq5kN4vwaZBS9oOu+WxUlLZE6Rx46zcNnet6yXO6CLI
4EUdHqosuSGw6Hh3Ld3HO4HeUFGZEy8kkKEkQpvtn6d4KptxP/8HxIjPHcK+uzTu
yGTHGlZ0xW+1cMmCpa2VhxJGfQhpl8lp07tnedn7Ip+HMkrclvwhipN4lnvZIfzL
OG1uCAHqlk/BMGulCief2U4dGAi/DWxQDtzB0/3Lo8F2r08EH8sG8aDaHlD9G2jW
Ru/l+5MGHqG7AFKqDei3NF2zaaUqkR+8hQHK1/qJKqhjtMsiHoDYnWcg9MmTRPnv
gwSrGti7gvVjIKi/VhV/VCGmCOlChg==
=/jcS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha-gitlab/tags/block-pull-request' into staging
Pull request
This dirty bitmap fix solves a crash that can be triggered in the destination
QEMU process during live migration.
# gpg: Signature made Wed 24 Mar 2021 14:51:31 GMT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha-gitlab/tags/block-pull-request:
migrate-bitmaps-postcopy-test: check that we can't remove in-flight bitmaps
migration/block-dirty-bitmap: make incoming disabled bitmaps busy
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
And ioeventfd are only available with virtio-scsi-pci or virtio-scsi-ccw,
use the alias but add a rule to require virtio-scsi-pci or virtio-scsi-ccw
for the tests that use iothreads.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210319202335.2397060-7-laurent@vivier.eu>
Message-Id: <20210323165308.15244-22-alex.bennee@linaro.org>
This allows to cover the virtio tests with a 32bit big-endian
virtio-mmio machine.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210319202335.2397060-6-laurent@vivier.eu>
Message-Id: <20210323165308.15244-21-alex.bennee@linaro.org>
Commit f1d5516ab5 introduces a test in some iotests to check if
the machine is a s390-ccw-virtio and to select virtio-*-ccw rather
than virtio-*-pci.
We don't need that because QEMU already provides aliases to use the correct
virtio interface according to the machine type.
This patch removes all virtio-*-pci and virtio-*-ccw to use virtio-*
instead and remove get_virtio_scsi_device().
This also enables virtio-mmio devices (virtio-*-device)
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210319202335.2397060-5-laurent@vivier.eu>
Message-Id: <20210323165308.15244-20-alex.bennee@linaro.org>
Mingw recognizes that "0x" has value 0 without setting errno, but
fails to advance endptr to the trailing garbage 'x'. This in turn
showed up in our recent testsuite additions for qemu_strtosz (commit
1657ba44b4 utils: Enhance testsuite for do_strtosz()); adjust our
remaining tests to show that we now work around this windows bug.
This patch intentionally fails check-syntax for use of strtol.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210317143325.2165821-3-eblake@redhat.com>
Message-Id: <20210323165308.15244-15-alex.bennee@linaro.org>
Our tests were not validating the return value in all cases, nor was
it guaranteeing our documented claim that 'res' is unchanged on error.
For that matter, it wasn't as thorough as the existing tests for
qemu_strtoi() and friends for proving that endptr and res are sanely
set. Enhancing the test found one case where we violated our
documentation: namely, when failing with EINVAL when endptr is NULL,
we shouldn't modify res.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210317143325.2165821-2-eblake@redhat.com>
Message-Id: <20210323165308.15244-14-alex.bennee@linaro.org>
Query the SYS_HEAPINFO semicall and do some basic verification of the
information via libc calls.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210323165308.15244-10-alex.bennee@linaro.org>
It may be arm-compat-semihosting but more than one architecture uses
it so lets move the tests into the multiarch area. We gate it on the
feature and split the semicall.h header between the arches.
Also clean-up a bit of the Makefile messing about to one common set of
runners.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323165308.15244-6-alex.bennee@linaro.org>
Check that we can't remove bitmaps being migrated on destination vm.
The new check proves that previous commit helps.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210322094906.5079-3-vsementsov@virtuozzo.com>
Union branch names should use '-', not '_'. Enforce this. The only
offenders are in tests/. Fix them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-29-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message typo fixed]
Enum members should use '-', not '_'. Enforce this. Fix the fixable
offenders (all in tests/), and add the remainder to pragma
member-name-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Struct members, including command arguments, event data, and union
inline base members, should use '-', not '_'. Enforce this. Fix the
fixable offenders (all in tests/), and add the remainder to pragma
member-name-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-27-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Test args-name-clash covers command parameter name clash. This
effectively covers struct member name clash as well. The next commit
will make parameter name clash impossible. Convert args-name-clash
from testing command to testing a struct, and rename it to
struct-member-name-clash.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-26-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message typo fixed]
Command names should be lower-case. Enforce this. Fix the fixable
offenders (all in tests/), and add the remainder to pragma
command-name-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-25-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Command names and member names within a type should be all lower case
with words separated by a hyphen. We also accept underscore. Rework
check_name_lower() to optionally reject underscores, but don't use
that option, yet.
Update expected test output for the changed error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-23-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit 967c885108 "qapi: add 'if' to top-level expressions" added
command TestIfCmd with an 'if' condition. It also added the
qmp_TestIfCmd() to go with it, guarded by the corresponding #if.
Commit ccadd6bcba "qapi: Add 'if' to implicit struct members" changed
the command, but not the function. Compiles only because we don't
satisfy the #if. Instead of fixing the function, simply drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-22-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Rename pragma returns-whitelist to command-returns-exceptions, and
name-case-whitelist to member-name-case-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-20-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This test covers returning "bad" types. Pragma returns-whitelist is
just one aspect. Naming it returns-whitelist is suboptimal. Rename
to returns-bad-type.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-19-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Rename pragma-doc-required-crap to pragma-not-bool,
pragma-returns-whitelist-crap to pragma-value-not-list, and
pragma-name-case-whitelist-crap to pragma-value-not-list-of-str.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-18-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The previous commit changed this test to clash with a predefined enum
type, not a built-in type. Adjust its name.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-16-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Type names should be CamelCase. Enforce this. The only offenders are
in tests/. Fix them. Add test type-case to cover the new error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Regexp simplified, new test made more robust]
Event names should be ALL_CAPS with words separated by underscore.
Enforce this. The only offenders are in tests/. Fix them. Existing
test event-case covers the new error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-14-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
check_type() fails to reject optional members with reserved names,
because it neglects to strip off the leading '*'. Fix that.
The stripping in check_name_str() is now useless. Drop.
Also drop the "no leading '*'" assertion, because valid_name.match()
ensures it can't fail.
Fixes: 9fb081e0b9
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-8-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Member name 'u' and names starting with 'has-' or 'has_' are reserved
for the generator. check_type() enforces this, covered by tests
reserved-member-u and reserved-member-has.
These tests neglect to cover optional members, where the name starts
with '*'. Tweak reserved-member-u to fix that. Test
reserved-member-has still covers non-optional members.
This demonstrates the reserved member name check is broken for
optional members. The next commit will fix it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-7-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
[Commit message improved slightly]
Simple unions don't need more features, they need to die.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-6-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Commit 0426d53c65 "qapi: Simplify visiting of alternate types"
eliminated the implicit alternate enum, but neglected to update a
comment about it in a test. Do that now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-5-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
A few old comments talk about "desired future use of defaults" and
"anonymous inline branch types". Kind of misleading since commit
87adbbffd4 "qapi: add a dictionary form for TYPE" added longhand
member definitions. Talk about that instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
flat-union-inline.json covers longhand branch definition with an
invalid type value. It's redundant: longhand branch definition is
covered by flat-union-inline-invalid-dict.json, and invalid type value
is covered by nested-struct-data.json. Drop the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-3-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
The function flatview_for_each_range() calls a callback for each
range in a FlatView. Currently the callback gets the start and
length of the range and the MemoryRegion involved, but not the offset
within the MemoryRegion. Add this to the callback's arguments; we're
going to want it for a new use in the next commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210318174823.18066-4-peter.maydell@linaro.org
The return value of the flatview_cb callback passed to the
flatview_for_each_range() function is zero if the iteration through
the ranges should continue, or non-zero to break out of it. Use a
bool for this rather than int.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210318174823.18066-2-peter.maydell@linaro.org
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210315180102.3008391-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJgWGTMAAoJEO8Ells5jWIRLUQIAJ6xxOKldqyo9n9N2vP+6O1J
lLSC0NT2d0ACptl/8o+KKlf9z2n7o/SKykLUXwCjgLeT2xTKhJ+p8tPOXJ4gns3D
U3GGc20gUkuGwNl0g2Rr2Yz4EJXlxx5Sl9LJz9quyx0Yp0SV8fYgQpj3mLgRye6T
hbVSDnQiSyo1iSx+Q/Qc6+Gr4a+sV4pExhrVP1n61JFCB95DUMNqjBsHv+urowHh
WCN9JbHuiZRHeIGIZujJxzMrh8jlP4pPFIrXvsdwHm/xJlVTgMXFvfIjfi3IrYWU
NbI0PluSfPbeAB8V+aPb9386K4UFpEEHJipIm+4HSVpVsAuoRVnEVoIWGubXfWo=
=9Tij
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 22 Mar 2021 09:35:08 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net/eth: Add an assert() and invert if() statement to simplify code
net/eth: Read ip6_ext_hdr_routing buffer before accessing it
net/eth: Check iovec has enough data earlier
net/eth: Check size earlier in _eth_get_rss_ex_dst_addr()
net/eth: Better describe _eth_get_rss_ex_dst_addr's offset argument
net/eth: Simplify _eth_get_rss_ex_dst_addr()
net/eth: Use correct in6_address offset in _eth_get_rss_ex_dst_addr()
net/colo-compare.c: Optimize removal of secondary packet
net/colo-compare.c: Fix memory leak for non-tcp packet
hw/net: virtio-net: Initialize nc->do_not_pad to true
net: Pad short frames to minimum size before sending from SLiRP/TAP
net: Add a 'do_not_pad" to NetClientState
net: eth: Add a helper to pad a short Ethernet frame
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
FreeBSD 12.1 has reached end of life. Use 12.2 instead so that FreeBSD's
project's packages will work. Update which timezone to pick. Work around a QEMU
bug that incorrectly raises an exception on a CRC32 instruction with the FPU
disabled. The qemu bug is described here:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg784158.html
Signed-off-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20210307155654.993-2-imp@bsdimp.com>
[thuth: Disable gnutls to work-around a problem with libtasn1]
Signed-off-by: Thomas Huth <thuth@redhat.com>
When building qemu with GCC 11, test-block-iothread produces the following
warning:
../tests/unit/test-block-iothread.c:148:11: error: ‘buf’ may be used
uninitialized [-Werror=maybe-uninitialized]
This is caused by buf[512] left uninitialized and passed to
bdrv_save_vmstate() that expects a const uint8_t *, so the compiler
assumes it will be read and expects the parameter to be initialized.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210319112218.49609-1-eesposit@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This policy rejects deprecated input, and thus permits "testing the
future". Implement it for QMP command arguments: reject commands with
deprecated ones. Example: when QEMU is run with -compat
deprecated-input=reject, then
{"execute": "eject", "arguments": {"device": "cd"}}
fails like this
{"error": {"class": "GenericError", "desc": "Deprecated parameter 'device' disabled by policy"}}
When the deprecated parameter is removed, the error will change to
{"error": {"class": "GenericError", "desc": "Parameter 'device' is unexpected"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-11-armbru@redhat.com>
This policy rejects deprecated input, and thus permits "testing the
future". Implement it for QMP commands: make deprecated ones fail.
Example: when QEMU is run with -compat deprecated-input=reject, then
{"execute": "query-cpus"}
fails like this
{"error": {"class": "CommandNotFound", "desc": "Deprecated command query-cpus disabled by policy"}}
When the deprecated command is removed, the error will change to
{"error": {"class": "CommandNotFound", "desc": "The command query-cpus has not been found"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-10-armbru@redhat.com>
Without this stub, the next commit fails to link. I suspect the real
cause is 947e47448d "monitor: Use getter/setter functions for
cur_mon".
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-9-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP event data: suppress
deprecated members.
No QMP event data is deprecated right now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-6-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP events: suppress
deprecated ones.
No QMP event is deprecated right now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-5-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP command results. Example:
when QEMU is run with -compat deprecated-output=hide, then
{"execute": "query-cpus-fast"}
yields
{"return": [{"thread-id": 9805, "props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "qom-path": "/machine/unattached/device[0]", "cpu-index": 0, "target": "x86_64"}]}
instead of
{"return": [{"arch": "x86", "thread-id": 22436, "props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "qom-path": "/machine/unattached/device[0]", "cpu-index": 0, "target": "x86_64"}]}
Note the suppression of deprecated member "arch".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-4-armbru@redhat.com>
Clean up the writes to the configuration space and the PM region, and
rename the test to lpc-ich9-test.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several QOM type names contain ',':
ARM,bitband-memory
etraxfs,pic
etraxfs,serial
etraxfs,timer
fsl,imx25
fsl,imx31
fsl,imx6
fsl,imx6ul
fsl,imx7
grlib,ahbpnp
grlib,apbpnp
grlib,apbuart
grlib,gptimer
grlib,irqmp
qemu,register
SUNW,bpp
SUNW,CS4231
SUNW,DBRI
SUNW,DBRI.prom
SUNW,fdtwo
SUNW,sx
SUNW,tcx
xilinx,zynq_slcr
xlnx,zynqmp
xlnx,zynqmp-pmu-soc
xlnx,zynq-xadc
These are all device types. They can't be plugged with -device /
device_add, except for xlnx,zynqmp-pmu-soc, and I doubt that one
actually works.
They *can* be used with -device / device_add to request help.
Usability is poor, though: you have to double the comma, like this:
$ qemu-system-x86_64 -device SUNW,,fdtwo,help
Trap for the unwary. The fact that this was broken in
device-introspect-test for more than six years until commit e27bd49876
fixed it demonstrates that "the unwary" includes seasoned developers.
One QOM type name contains ' ': "ICH9 SMB". Because having to
remember just one way to quote would be too easy.
Rename the "SUNW,FOO types to "sun-FOO". Summarily replace ',' and '
' by '-' in the other type names.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210304140229.575481-2-armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the crap deprecated in commit 4a27a638e7 "fdc: Deprecate
configuring floppies with -global isa-fdc" (v5.1.0).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20210309161214.1402527-3-armbru@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
qemu-fuzz-i386-target-generic-fuzz-sdhci-v3 uses -drive=sd where it
should use -drive if=none instead. This prints a deprecation warning:
$ ./build-oss-fuzz/DEST_DIR/qemu-fuzz-i386-target-generic-fuzz-sdhci-v3 -runs=1 -seed=1
[ASan warnings snipped...]
--> i386: -drive if=sd,index=0,file=null-co://,format=raw,id=mydrive: warning: bogus if=sd is deprecated, use if=none
INFO: Seed: 1
[More normal output snipped...]
Support for this usage will be gone soon. Adjust the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210319132008.1830950-1-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The command-line creation test is using QemuOpts. Switch it to keyval,
since the emulator has some special needs and thus the last user of
user_creatable_add_opts will go away with the next patch.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210312173547.1283477-2-pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QAPI doesn't know the aliases 'tty' and 'parport' and there is no
reason to prefer them to the real names of the backends 'serial' and
'parallel'.
Since warnings are not allowed in 'make check' output, we can't test
the deprecated alias any more. Remove it from test-char.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210311164253.338723-3-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'props' option has been deprecated in 5.0 in favour of a flattened
object-add command. Time to change our test cases to drop the deprecated
option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The image streaming block job restricts shared permissions of the nodes
it accesses. This can obviously fail when other users already got these
permissions. &error_abort is therefore wrong and can crash. Handle these
errors gracefully and just fail starting the block job.
Reported-by: Nini Gu <ngu@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210309173451.45152-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_close_all() asserts that no jobs are running any more, so we need
to cancel all jobs first to avoid failing the assertion.
Fixes: b55a3c8860
Reported-by: Nini Gu <ngu@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210309121814.31078-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Small collection of Acceptance and Python tests/improvements.
-----BEGIN PGP SIGNATURE-----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=/Qqa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber-gitlab/tags/python-next-pull-request' into staging
Acceptance and Python Test Improvements
Small collection of Acceptance and Python tests/improvements.
# gpg: Signature made Wed 17 Mar 2021 03:22:47 GMT
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber-gitlab/tags/python-next-pull-request:
tests/acceptance: linux-related tests fix
tests: Add functional test for out-of-process device emulation
avocado_qemu: add exec_command function
tests/migration: fix unix socket batch migration
tests/acceptance: Print expected message on wait_for_console_pattern
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'host_device' and 'host_cdrom' drivers must be used instead.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The same data is available in the 'BlockDeviceInfo' struct.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The same information is available via the 'recording' and 'busy' fields.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This has been hardcoded to "false" since 2.10.0, since secrets required
to unlock block devices are now always provided up front instead of using
interactive prompts.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'scsi-hd' and 'scsi-cd' devices provide suitable alternatives.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'ide-hd' and 'ide-cd' devices provide suitable alternatives.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The newer 'query-cpus-fast' command avoids side effects on the guest
execution. Note that some of the field names are different in the
'query-cpus-fast' command.
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The generic 'migrate_set_parameters' command handle all types of param.
Only the QMP commands were documented in the deprecations page, but the
rationale for deprecating applies equally to HMP, and the replacements
exist. Furthermore the HMP commands are just shims to the QMP commands,
so removing the latter breaks the former unless they get re-implemented.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This commit adds a new syscalls plugin that displays the syscalls
as they are executed and returned. This plugin outputs the number
of the syscall as well as the syscall return value.
Works in *-user only.
Essentially, this commit restores:
https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg00846.html
by using the new QEMU plugin API.
Signed-off-by: Matthias Weckbecker <matthias@weckbecker.name>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200812115816.4454-1-matthias@weckbecker.name>
Message-Id: <20210312172821.31647-2-alex.bennee@linaro.org>
Once we've parsed the fractional value, extract it into an integral
64-bit fraction. Perform the scaling with integer arithmetic, and
simplify the overflow detection.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210315185117.1986240-2-richard.henderson@linaro.org>
This patch allows cloudinit images download when ssh
key is not specified.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <161373266228.1608713.7614311331725780044.stgit@pasha-ThinkPad-X280>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Runs the Avocado acceptance test to check if a
remote lsi53c895a device gets identified by the guest.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[WR: Refactored code]
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210303205320.146047-3-willianr@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Sometimes a test needs to send a command to a console without waiting
for a pattern as a result, or the command issued do not produce any kind
of output, like, for example, a `mount` command.
This introduces the `exec_command` function to the avocado_qemu,
allowing the test to send a command to the console without the need to
match a pattern produced as a result.
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210303205320.146047-2-willianr@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
when execute the following test command:
"guestperf-batch.py --dst-host localhost --transport unix ..."
test aborts and error message as the following be throwed:
"launching VM Failed: [Errno 98] Address already in use".
The reason is that batch script use the same monitor socket
in all test cases and do not remove the socket file. The second
migration test will launch vm use the same socket file as
the first, so we get the error message. To fix it, just remove
the socket file each time we have done the migration test.
Signed-off-by: Hyman <huangy81@chinatelecom.cn>
Message-Id: <c3fc438993b87a6ab0bea3d07f6ca0260d29936e.1615397103.git.huangy81@chinatelecom.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
For the sake of improve debuggability of tests which use the
wait_for_console_pattern(), this changed the _console_interaction() so that
the expected message is printed if the test fail.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210309153507.1905682-1-wainersm@redhat.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The generic-fuzzer often provides randomized DMA addresses to
virtual-devices. For a 64-bit address-space, the chance of these
randomized addresses coinciding with RAM regions, is fairly small. Even
though the fuzzer's instrumentation eventually finds valid addresses,
this can take some-time, and slows-down fuzzing progress (especially,
when multiple DMA buffers are involved). To work around this, create
"fake" sparse-memory that spans all of the 64-bit address-space. Adjust
the DMA call-back to populate this sparse memory, correspondingly
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I noticed that with a sufficiently small timeout, the fuzzer fork-server
sometimes locks up. On closer inspection, the issue appeared to be
caused by entering our SIGALRM handler, while libfuzzer is in it's crash
handlers. Because libfuzzer relies on pipe communication with an
external child process to print out stack-traces, we shouldn't exit
early, and leave an orphan child. Check for children in the SIGALRM
handler to avoid this issue.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The device-type names for the pro100 network cards, are i8255.. We were
matching "eepro", which catches the PCI PIO/MMIO regions for those
devices, however misses the actual PCI device, which we use to map the
BARs, before fuzzing. Fix that
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test fails when QEMU is built without the virtio-scsi device,
restrict it to its availability.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test fails when QEMU is built without the megasas device,
restrict it to its availability.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Once we've parsed the fractional value, extract it into an integral
64-bit fraction. Perform the scaling with integer arithmetic, and
simplify the overflow detection.
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210315155835.1970210-2-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A simply qtest that checks for correct number of netdevs in the response
of the query-netdev.
Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
* Clean-up and improve gitlab-ci jobs
* Drop the non-working "check-speed" makefile target
* Minor documentation updates
-----BEGIN PGP SIGNATURE-----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=YxBC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-03-12' into staging
* Move unit and bench tests into separate directories
* Clean-up and improve gitlab-ci jobs
* Drop the non-working "check-speed" makefile target
* Minor documentation updates
# gpg: Signature made Fri 12 Mar 2021 17:18:45 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2021-03-12:
README: Add Documentation blurb
MAINTAINERS: Merge the Gitlab-CI section into the generic CI section
tests: remove "make check-speed" in favor of "make bench"
gitlab-ci.yml: Merge check-crypto-old jobs into the build-crypto-old jobs
gitlab-ci.yml: Merge one of the coroutine jobs with the tcg-disabled job
gitlab-ci.yml: Add some missing dependencies to the jobs
gitlab-ci.yml: Move build-tools-and-docs-debian to a better place
tests: Move benchmarks into a separate folder
tests: Move unit tests into a separate directory
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"make check-speed" has been broken since the removal of ninja2make
last October. It was just a backwards-compatibility alias for
"make bench-speed", which in turn is in principle a subset of
"make bench". Advertise the latter and drop "make check-speed"
completely since no one has noticed.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210310164612.285362-1-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Make it clear that these files are related to benchmarks by moving
them into a new folder called "bench".
Message-Id: <20210312092238.79509-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The main tests directory still looks very crowded, and it's not
clear which files are part of a unit tests and which belong to
a different test subsystem. Let's clean up the mess and move the
unit tests to a separate directory.
Message-Id: <20210310063314.1049838-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch adds testing of PWM fan RPMs in the existing npcm7xx pwm
test. It tests whether the MFT module can measure correct fan values
for a PWM fan in NPCM7XX boards.
Reviewed-by: Doug Evans <dje@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210311180855.149764-6-wuhaotsh@google.com
[PMM: fixed format strings for printing uint64_t]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously the ARMBIAN_ARTIFACTS_CACHED pre-condition was added to allow running
tests that have already existing armbian.com artifacts stored in the local avocado cache,
but do not have working URLs to download a fresh copy.
At this time of writing the URLs for artifacts on the armbian.com server are updated and working.
Any future broken URLs will result in a skipped acceptance test, for example:
(1/5) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi:
CANCEL: Missing asset https://apt.armbian.com/pool/main/l/linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb (0.53 s)
This commits removes the ARMBIAN_ARTIFACTS_CACHED pre-condition such that
the acceptance tests for the orangepi-pc and cubieboard machines can run.
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210310195820.21950-6-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The linux kernel 4.20.7 binary for sunxi has been removed from apt.armbian.com:
$ ARMBIAN_ARTIFACTS_CACHED=yes AVOCADO_ALLOW_LARGE_STORAGE=yes avocado --show=app,console run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py
Fetching asset from tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi
...
(1/6) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi:
CANCEL: Missing asset https://apt.armbian.com/pool/main/l/linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb (0.55 s)
This commit updates the sunxi kernel to 5.10.16 for the acceptance
tests of the orangepi-pc and cubieboard machines.
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210310195820.21950-5-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the download URL of the Armbian 20.08 Bionic image for
test_arm_orangepi_bionic_20_08 of the orangepi-pc machine.
The archive.armbian.com URL contains more images and should keep stable
for a longer period of time than dl.armbian.com.
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210310195820.21950-4-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The image for Armbian 19.11.3 bionic has been removed from the armbian server.
Without the image as input the test arm_orangepi_bionic_19_11 cannot run.
This commit removes the test completely and merges the code of the generic function
do_test_arm_orangepi_uboot_armbian back with the 20.08 test.
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210310195820.21950-3-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Next batch of patches for the ppc target and machine types. Includes:
* Several cleanups for sm501 from Peter Maydell
* An update to the SLOF guest firmware
* Improved handling of hotplug failures in spapr, associated cleanups
to the hotplug handling code
* Several etsec fixes and cleanups from Bin Meng
* Assorted other fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=/uyx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210310' into staging
ppc patch queue for 2021-03-10
Next batch of patches for the ppc target and machine types. Includes:
* Several cleanups for sm501 from Peter Maydell
* An update to the SLOF guest firmware
* Improved handling of hotplug failures in spapr, associated cleanups
to the hotplug handling code
* Several etsec fixes and cleanups from Bin Meng
* Assorted other fixes and cleanups
# gpg: Signature made Wed 10 Mar 2021 04:08:53 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dg-gitlab/tags/ppc-for-6.0-20210310:
spapr.c: send QAPI event when memory hotunplug fails
spapr.c: remove duplicated assert in spapr_memory_unplug_request()
target/ppc: fix icount support on Book-e vms accessing SPRs
qemu_timer.c: add timer_deadline_ms() helper
spapr_pci.c: add 'unplug already in progress' message for PCI unplug
spapr.c: add 'unplug already in progress' message for PHB unplug
hw/ppc: e500: Add missing <ranges> in the eTSEC node
hw/net: fsl_etsec: Fix build error when HEX_DUMP is on
spapr_drc.c: use DRC reconfiguration to cleanup DIMM unplug state
spapr_drc.c: add hotunplug timeout for CPUs
spapr_drc.c: introduce unplug_timeout_timer
target/ppc: Fix bcdsub. emulation when result overflows
docs/system: Extend PPC section
spapr: rename spapr_drc_detach() to spapr_drc_unplug_request()
spapr_drc.c: use spapr_drc_release() in isolate_physical/set_unusable
pseries: Update SLOF firmware image
spapr_drc.c: do not call spapr_drc_detach() in drc_isolate_logical()
hw/display/sm501: Inline template header into C file
hw/display/sm501: Expand out macros in template header
hw/display/sm501: Remove dead code for non-32-bit RGB surfaces
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- add warning text to quickstart example
- add CFI tests to CI
- use --arch-only for docker pre-requisites
- fix .editorconfig for emacs
- add guest-loader for Xen-like hypervisor testing
- move generic-loader docs into manual proper
- move semihosting out of hw/
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmBI50MACgkQ+9DbCVqe
KkSyKggAhPZW+7sReVEsFdnVfwuo3evW7auoW44mghNbikTnm3RfoahYTrek8lGZ
AEo2gFMbzENW0j88e0OvSYYtwkVz3sD68bygfXerti6sQwWlwkf42I/suWjJNLph
oVKGEEdJess9+zR13Cu6RAq5RaTwzDPGPjUwTbeJPpAps4+UZV3hsxhaxs8keII6
GBa/idnh0qEApP2NDLKiSASrYZM7xGvljE7zO4qhchd6iSH/o5rCtkoB2tRCcXGo
+KF8LyBsUNf7GiWp0yYZMZUQ3Pqskqma8N3d2A4UlS1kXvxeX/FiORkG/Ne8bH1Z
VZ1Z/xbyXGlVkiP1bcoYSc6XWHNDTw==
=R9zQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2' into staging
Testing, guest-loader and other misc tweaks
- add warning text to quickstart example
- add CFI tests to CI
- use --arch-only for docker pre-requisites
- fix .editorconfig for emacs
- add guest-loader for Xen-like hypervisor testing
- move generic-loader docs into manual proper
- move semihosting out of hw/
# gpg: Signature made Wed 10 Mar 2021 15:35:31 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2:
semihosting: Move hw/semihosting/ -> semihosting/
semihosting: Move include/hw/semihosting/ -> include/semihosting/
tests/avocado: add boot_xen tests
docs: add some documentation for the guest-loader
docs: move generic-loader documentation into the main manual
hw/core: implement a guest-loader to support static hypervisor guests
device_tree: add qemu_fdt_setprop_string_array helper
hw/riscv: migrate fdt field to generic MachineState
hw/board: promote fdt from ARM VirtMachineState to MachineState
.editorconfig: update the automatic mode setting for Emacs
tests/docker: Use --arch-only when building Debian cross image
gitlab-ci.yml: Add jobs to test CFI flags
gitlab-ci.yml: Allow custom # of parallel linkers
tests/docker: add a test-tcg for building then running check-tcg
docs/system: add a gentle prompt for the complexity to come
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Add Vladimir as NBD co-maintainer
- Fix reporting of holes in NBD_CMD_BLOCK_STATUS
- Improve command-line parsing accuracy of large numbers (anything going
through qemu_strtosz), including the deprecation of hex+suffix
- Improve some error reporting in the block layer
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmBHlmIACgkQp6FrSiUn
Q2q2cQgAqJWNb4J/ShjvzocDDPzJ0iBitFbg0huFPfbt4DScubEZo5wBJG7vOhOW
hIHrWCRzGvRgsn0tcSfrgFaegmHKrLgjkibM7ou8ni9NC1kUBd3R/3FBNIMxhYf7
Q8Kfspl0LRfMJDKF9jdCnQ4Gxcd6h2OIYZqiWVg8V4Tc8WdCpIVOah7e7wjuW8bT
vgZvfboUWm5AmIF9j/MxuMn+HFZ4ArSuFVL80ZaXlD00vRra7u3HZ8pUfcOlOujg
7HeouM1E5j3NNE6aZSN++x/EQ3sg0zmirbWUCcgAyRfdRkAmB15uh2PUzPxEIJKH
UHUIW5LvNtz2+yzOAz2yK29OE523Yg==
=blE1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-03-09' into staging
nbd patches for 2021-03-09
- Add Vladimir as NBD co-maintainer
- Fix reporting of holes in NBD_CMD_BLOCK_STATUS
- Improve command-line parsing accuracy of large numbers (anything going
through qemu_strtosz), including the deprecation of hex+suffix
- Improve some error reporting in the block layer
# gpg: Signature made Tue 09 Mar 2021 15:38:10 GMT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2021-03-09:
block/qcow2: refactor qcow2_update_options_prepare error paths
block/qed: bdrv_qed_do_open: deal with errp
block/qcow2: simplify qcow2_co_invalidate_cache()
block/qcow2: read_cache_sizes: return status value
block/qcow2-bitmap: return status from qcow2_store_persistent_dirty_bitmaps
block/qcow2-bitmap: improve qcow2_load_dirty_bitmaps() interface
block/qcow2: qcow2_get_specific_info(): drop error propagation
blockjob: return status from block_job_set_speed()
block/mirror: drop extra error propagation in commit_active_start()
block: drop extra error propagation for bdrv_set_backing_hd
blockdev: fix drive_backup_prepare() missed error
block: check return value of bdrv_open_child and drop error propagation
utils: Deprecate hex-with-suffix sizes
utils: Improve qemu_strtosz() to have 64 bits of precision
utils: Enhance testsuite for do_strtosz()
nbd: server: Report holes for raw images
MAINTAINERS: add Vladimir as co-maintainer of NBD
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These tests make sure we can boot the Xen hypervisor with a Dom0
kernel using the guest-loader. We currently have to use a kernel I
built myself because there are issues using the Debian kernel images.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210303173642.3805-8-alex.bennee@linaro.org>
When building a Docker image based on debian10.docker on
a non-x86 host, we get:
[2/4] RUN apt update && DEBIAN_FRONTEND=noninteractive eatmydata apt build-dep -yy qemu
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
builddeps:qemu : Depends: gcc-s390x-linux-gnu but it is not installable
Depends: gcc-alpha-linux-gnu but it is not installable
E: Unable to correct problems, you have held broken packages.
Fix by using the --arch-only option suggested here:
https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1866032/comments/1
Suggested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210223211115.2971565-1-f4bug@amsat.org>
Message-Id: <20210305092328.31792-10-alex.bennee@linaro.org>
* Add new mps3-an547 board
* target/arm: Restrict v7A TCG cpus to TCG accel
* Implement a Xilinx CSU DMA model
* hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()
-----BEGIN PGP SIGNATURE-----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=Qu2a
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210310' into staging
target-arm queue:
* Add new mps3-an547 board
* target/arm: Restrict v7A TCG cpus to TCG accel
* Implement a Xilinx CSU DMA model
* hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()
# gpg: Signature made Wed 10 Mar 2021 13:56:20 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210310: (54 commits)
hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()
hw/timer/renesas_tmr: Prefix constants for CSS values with CSS_
hw/ssi: xilinx_spips: Remove DMA related dead codes from zynqmp_spips
hw/ssi: xilinx_spips: Clean up coding convention issues
hw/arm: xlnx-zynqmp: Connect a Xilinx CSU DMA module for QSPI
hw/arm: xlnx-zynqmp: Clean up coding convention issues
hw/dma: Implement a Xilinx CSU DMA model
target/arm: Restrict v7A TCG cpus to TCG accel
tests/qtest/sse-timer-test: Test counter scaling changes
tests/qtest/sse-timer-test: Test the system timer
tests/qtest/sse-timer-test: Add simple test of the SSE counter
docs/system/arm/mps2.rst: Document the new mps3-an547 board
hw/arm/mps2-tz: Add new mps3-an547 board
hw/arm/mps2-tz: Make initsvtor0 setting board-specific
hw/arm/mps2-tz: Support running APB peripherals on different clock
hw/misc/mps2-scc: Implement changes for AN547
hw/misc/mps2-fpgaio: Support AN547 DBGCTRL register
hw/misc/mps2-fpgaio: Fold counters subsection into main vmstate
hw/arm/mps2-tz: Make UART overflow IRQ board-specific
hw/arm/armsse: Add SSE-300 support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is mostly useful for verifying containers will work on the CI
setup.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210305092328.31792-4-alex.bennee@linaro.org>
The commit d03b174a83 (target/ppc: simplify bcdadd/sub functions)
meant to simplify some of the code but it inadvertently altered the
way the CR6 field is set after the operation has overflowed.
The CR6 bits are set based on the *unbounded* result of the operation,
so we need to look at the result before returning from bcd_add_mag,
otherwise we will look at 0 when it overflows.
Consider the following subtraction:
v0 = 0x9999999999999999999999999999999c (maximum positive BCD value)
v1 = 0x0000000000000000000000000000001d (negative one BCD value)
bcdsub. v0,v0,v1,0
The Power ISA 2.07B says:
If the unbounded result is greater than zero, do the following.
If PS=0, the sign code of the result is set to 0b1100.
If PS=1, the sign code of the result is set to 0b1111.
If the operation overflows, CR field 6 is set to 0b0101. Otherwise,
CR field 6 is set to 0b0100.
POWER9 hardware:
vr0 = 0x0000000000000000000000000000000c (positive zero BCD value)
cr6 = 0b0101 (0x5) (positive, overflow)
QEMU:
vr0 = 0x0000000000000000000000000000000c (positive zero BCD value)
cr6 = 0b0011 (0x3) (zero, overflow) <--- wrong
This patch reverts the part of d03b174a83 that introduced the
problem and adds a test-case to avoid further regressions:
before:
$ make run-tcg-tests-ppc64le-linux-user
(...)
TEST bcdsub on ppc64le
bcdsub: qemu/tests/tcg/ppc64le/bcdsub.c:58: test_bcdsub_gt:
Assertion `(cr >> 4) == ((1 << 2) | (1 << 0))' failed.
Fixes: d03b174a83 (target/ppc: simplify bcdadd/sub functions)
Reported-by: Paul Clarke <pc@us.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20210222194035.2723056-1-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Follow the inclusive terminology from the "Conscious Language in your
Open Source Projects" guidelines [*] and replace the word "blacklist"
appropriately.
[*] https://github.com/conscious-lang/conscious-lang-docs/blob/main/faq.md
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210303184644.1639691-6-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These flags cause the output to look strange for 'make check', and
they aren't needed to reproduce bugs, if they reappear.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210216181316.794276-1-alxndr@bu.edu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Previously, tests were being filtered by the matching target
architectures to be built. The benefit, compared to the current
situation, is a more concise test job that won't show tests canceled
because a matching QEMU binary was not found (those tests won't even
be attempted).
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210225232122.1254879-3-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "get-vm-images" target defined in tests/Makefile.include is a
prerequisite for "check-acceptance", so that those files get
downloaded before the Avocado job even starts.
It looks like on c401c058a1 a TARGETS variable was introduced with a
different content than it was previously coming from the main
Makefile. From that point on, the "get-vm-images" succeed without
doing anything because there was no matching architecture to download.
This restores the download of images (that match targets to be built)
before the job starts, eliminating downloads and their associated
failures during the tests.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210225232122.1254879-2-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Change documentation style and fix minor typos in tests/qtest/libqos/qgraph.h
to automatically generate sphinx documentation in docs/devel/qgraph.rst
The mechanism explanation that once was in qgraph.h is now moved to qgraph.rst
There is no functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210308073240.6363-1-eesposit@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We have multiple clients of qemu_strtosz (qemu-io, the opts visitor,
the keyval visitor), and it gets annoying that edge-case testing is
impacted by implicit rounding to 53 bits of precision due to parsing
with strtod(). As an example posted by Rich Jones:
$ nbdkit memory $(( 2**63 - 2**30 )) --run \
'build/qemu-io -f raw "$uri" -c "w -P 3 $(( 2**63 - 2**30 - 512 )) 512" '
write failed: Input/output error
because 9223372035781033472 got rounded to 0x7fffffffc0000000 which is
out of bounds.
It is also worth noting that our existing parser, by virtue of using
strtod(), accepts decimal AND hex numbers, even though test-cutils
previously lacked any coverage of the latter until the previous patch.
We do have existing clients that expect a hex parse to work (for
example, iotest 33 using qemu-io -c "write -P 0xa 0x200 0x400"), but
strtod() parses "08" as 8 rather than as an invalid octal number, so
we know there are no clients that depend on octal. Our use of
strtod() also means that "0x1.8k" would actually parse as 1536 (the
fraction is 8/16), rather than 1843 (if the fraction were 8/10); but
as this was not covered in the testsuite, I have no qualms forbidding
hex fractions as invalid, so this patch declares that the use of
fractions is only supported with decimal input, and enhances the
testsuite to document that.
Our previous use of strtod() meant that -1 parsed as a negative; now
that we parse with strtoull(), negative values can wrap around modulo
2^64, so we have to explicitly check whether the user passed in a '-';
and make it consistent to also reject '-0'. This has the minor effect
of treating negative values as EINVAL (with no change to endptr)
rather than ERANGE (with endptr advanced to what was parsed), visible
in the updated iotest output.
We also had no testsuite coverage of "1.1e0k", which happened to parse
under strtod() but is unlikely to occur in practice; as long as we are
making things more robust, it is easy enough to reject the use of
exponents in a strtod parse.
The fix is done by breaking the parse into an integer prefix (no loss
in precision), rejecting negative values (since we can no longer rely
on strtod() to do that), determining if a decimal or hexadecimal parse
was intended (with the new restriction that a fractional hex parse is
not allowed), and where appropriate, using a floating point fractional
parse (where we also scan to reject use of exponents in the fraction).
The bulk of the patch is then updates to the testsuite to match our
new precision, as well as adding new cases we reject (whether they
were rejected or inadvertently accepted before).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210211204438.1184395-3-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Enhance our testsuite coverage of do_strtosz() to cover some things we
know that existing users want to continue working (hex bytes), as well
as some things that accidentally work but shouldn't (hex fractions) or
accidentally fail but that users want to work (64-bit precision on
byte values). This includes fixing a typo in the comment regarding
our parsing near 2^64.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210211204438.1184395-2-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When querying image extents for raw image, qemu-nbd reports holes as
zero:
$ qemu-nbd -t -r -f raw empty-6g.raw
$ qemu-img map --output json nbd://localhost
[{ "start": 0, "length": 6442450944, "depth": 0, "zero": true, "data": true, "offset": 0}]
$ qemu-img map --output json empty-6g.raw
[{ "start": 0, "length": 6442450944, "depth": 0, "zero": true, "data": false, "offset": 0}]
Turns out that qemu-img map reports a hole based on BDRV_BLOCK_DATA, but
nbd server reports a hole based on BDRV_BLOCK_ALLOCATED.
The NBD protocol says:
NBD_STATE_HOLE (bit 0): if set, the block represents a hole (and
future writes to that area may cause fragmentation or encounter an
NBD_ENOSPC error); if clear, the block is allocated or the server
could not otherwise determine its status.
qemu-img manual says:
whether the sectors contain actual data or not (boolean field data;
if false, the sectors are either unallocated or stored as
optimized all-zero clusters);
To me, data=false looks compatible with NBD_STATE_HOLE. From user point
of view, getting same results from qemu-nbd and qemu-img is more
important than being more correct about allocation status.
Changing nbd server to report holes using BDRV_BLOCK_DATA makes qemu-nbd
results compatible with qemu-img map:
$ qemu-img map --output json nbd://localhost
[{ "start": 0, "length": 6442450944, "depth": 0, "zero": true, "data": false, "offset": 0}]
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-Id: <20210219160752.1826830-1-nsoffer@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Test that when we change the scaling of the system counter that the
system timer responds appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add a test which tests various parts of the functionality of the
SSE system timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add a simple qtest to exercise the new system counter device in the
SSE-300.
We'll add tests of the system timer device here too, so this includes
scaffolding (register definitions, etc) for those.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210219144617.4782-45-peter.maydell@linaro.org
Some error messages contain ambiguous representations of the 'node-name'
parameter. This can be particularly confusing when exchanging QMP
messages (C = client, S = server):
C: {"execute": "block_resize", "arguments": { "device": "my_file", "size": 26843545600 }}
S: {"error": {"class": "GenericError", "desc": "Cannot find device=my_file nor node_name="}}
^^^^^^^^^
This error message suggests one could send a message with a key called
'node_name':
C: {"execute": "block_resize", "arguments": { "node_name": "my_file", "size": 26843545600 }}
^^^^^^^^^
but using the underscore is actually incorrect, the parameter should be
'node-name':
S: {"error": {"class": "GenericError", "desc": "Parameter 'node_name' is unexpected"}}
This behavior was uncovered in bz1651437, but I ended up going down a
rabbit hole looking for other areas where this miscommunication might
occur and changing those accordingly as well.
Fixes: https://bugzilla.redhat.com/1651437
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Message-Id: <20210305151929.1947331-2-ckuehl@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test support for reading bitmap from parallels image format.
parallels-with-bitmap.bz2 is generated on Virtuozzo by
parallels-with-bitmap.sh
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210224104707.88430-7-vsementsov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210224104707.88430-6-vsementsov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a function to remove previously-added abrt handler functions.
Now that a symmetric pair of add/remove functions exists we can also
balance the SIGABRT handler installation. The signal handler was
installed each time qtest_add_abrt_handler() was called. Now it is
installed when the abrt handler list becomes non-empty and removed again
when the list becomes empty.
The qtest_remove_abrt_handler() function will be used by
vhost-user-blk-test.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210223144653.811468-5-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tests that manage multiple processes may wish to kill QEMU before
destroying the QTestState. Expose a function to do that.
The vhost-user-blk-test testcase will need this.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210223144653.811468-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add an API that returns a new UNIX domain socket in the listen state.
The code for this was already there but only used internally in
init_socket().
This new API will be used by vhost-user-blk-test.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210223144653.811468-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Break some long lines, and relax our type hints to be more generic to
any JSON, in order to more easily permit the additional JSON depth now
possible in migration parameters. Detected by iotest 297.
Fixes: ca4bfec41d
(qemu-iotests: 300: Add test case for modifying persistence of bitmap)
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210215220518.1745469-1-eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Without any of HEAD^ or HEAD^^ applied, qemu will most likely crash on
the qemu-io invocation, for a variety of immediate reasons. The
underlying problem is generally a use-after-free access into
backup-top's BlockCopyState.
With only HEAD^ applied, qemu-io will run into an EIO (which is not
capture by the output, but you can see that the qemu-io invocation will
be accepted (i.e., qemu-io will run) in contrast to the reference
output, where the node name cannot be found), and qemu will then crash
in query-named-block-nodes: bdrv_get_allocated_file_size() detects
backup-top to be a filter and passes the request through to its child.
However, after bdrv_backup_top_drop(), that child is NULL, so the
recursive call crashes.
With HEAD^^ applied, this test should pass.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210219153348.41861-4-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* sbsa-ref: remove cortex-a53 from list of supported cpus
* sbsa-ref: add 'max' to list of allowed cpus
* target/arm: Add support for FEAT_SSBS, Speculative Store Bypass Safe
* npcm7xx: add EMC model
* xlnx-zynqmp: Remove obsolete 'has_rpu' property
* target/arm: Speed up aarch64 TBL/TBX
* virtio-mmio: improve virtio-mmio get_dev_path alog
* target/arm: Use TCF0 and TFSRE0 for unprivileged tag checks
* target/arm: Restrict v8M IDAU to TCG
* target/arm/cpu: Update coding style to make checkpatch.pl happy
* musicpal, tc6393xb, omap_lcdc, tcx: drop dead code for non-32-bit-RGB surfaces
* Add new board: mps3-an524
-----BEGIN PGP SIGNATURE-----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=nphT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210308' into staging
target-arm queue:
* sbsa-ref: remove cortex-a53 from list of supported cpus
* sbsa-ref: add 'max' to list of allowed cpus
* target/arm: Add support for FEAT_SSBS, Speculative Store Bypass Safe
* npcm7xx: add EMC model
* xlnx-zynqmp: Remove obsolete 'has_rpu' property
* target/arm: Speed up aarch64 TBL/TBX
* virtio-mmio: improve virtio-mmio get_dev_path alog
* target/arm: Use TCF0 and TFSRE0 for unprivileged tag checks
* target/arm: Restrict v8M IDAU to TCG
* target/arm/cpu: Update coding style to make checkpatch.pl happy
* musicpal, tc6393xb, omap_lcdc, tcx: drop dead code for non-32-bit-RGB surfaces
* Add new board: mps3-an524
# gpg: Signature made Mon 08 Mar 2021 11:56:24 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210308: (49 commits)
hw/arm/mps2: Update old infocenter.arm.com URLs
docs/system/arm/mps2.rst: Document the new mps3-an524 board
hw/arm/mps2-tz: Provide PL031 RTC on mps3-an524
hw/arm/mps2-tz: Stub out USB controller for mps3-an524
hw/arm/mps2-tz: Add new mps3-an524 board
hw/arm/mps2-tz: Get armv7m_load_kernel() size argument from RAMInfo
hw/arm/mps2-tz: Support ROMs as well as RAMs
hw/arm/mps2-tz: Set MachineClass default_ram info from RAMInfo data
hw/arm/mps2-tz: Make RAM arrangement board-specific
hw/arm/mps2-tz: Allow boards to have different PPCInfo data
hw/arm/mps2-tz: Size the uart-irq-orgate based on the number of UARTs
hw/arm/mps2-tz: Move device IRQ info to data structures
hw/arm/mps2-tz: Allow PPCPortInfo structures to specify device interrupts
hw/arm/mps2-tz: Correct wrong interrupt numbers for DMA and SPI
hw/misc/mps2-scc: Implement CFG_REG5 and CFG_REG6 for MPS3 AN524
hw/arm/mps2-tz: Make number of IRQs board-specific
hw/arm/mps2-tz: Condition IRQ splitting on number of CPUs, not board type
hw/arm/mps2-tz: Make FPGAIO switch and LED config per-board
hw/misc/mps2-fpgaio: Support SWITCH register
hw/misc/mps2-fpgaio: Make number of LEDs configurable by board
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adjust the timeouts for the benchmarks (Meson 0.57 allows 0 to mean
infinite) and for the longest running tests. These are the
times that I measured and the corresponding timeouts. For generic
qtests, the target that reported the longest runtime is included.
unit tests:
test-crypto-tlscredsx509 13.15s 45s
test-crypto-tlssession 14.12s 45s
qtests:
qos-test 21.26s 60s (i386)
ahci-test 22.18s 60s
pxe-test 26.51s 60s
boot-serial-test 28.02s 60s (sparc)
prom-env-test 28.86s 60s
bios-tables-test 50.17s 120s (aarch64)
test-hmp 57.15s 120s (aarch64)
npcm7xx_pwm-test 71.27s 150s
migration-test 97.09s 150s (aarch64)
qom-test 139.20s 240s (aarch64)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 9d55380b5a "qapi: Remove null from schema language" (v4.2.0)
neglected to update two error messages. Do that now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210224101442.1837475-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
* target/i386: Add bus lock debug exception support (Chenyi)
* update documentation for preferred boolean option syntax (Daniel)
* make SCSI io_timeout configurable (Hannes)
* fix handling of guest recoverable SCSI errors (myself)
* misc fixes (Pavel, Zheng Zhan Liang, Zihao)
* fix installation of binaries with entitlements (Akihiko)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmA3tzQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMsngf+OkbgTDouxq3qnn1K89n6j2wKlAj0
qPP+57o1sv5u5MjX0BkawXCMJfvTKJaOt/Cs8S0FaPTehfR5H0T2tL76KZBEdlEP
/+V3EC0Qmd1S47LKIOuDkV15szvnccyjpgwaL7Osjb0Eh0SxeXd4pBTc3yYtkacu
zb/srZ63U2iJZr93QwGmEJjuW57WNym6QWXF3Mrg9PFXybkXFTGumB2vZMlQc+MN
RWPTUKZKAiIr/HfdvpIETXY+HzJhylvIQ8OVWtM3XDorl48OWcOat/jyeNEVYgG3
o+gxIRnfvIL+42GkmUFbOKLzT5SV6p9EYYGLTuE1kU7nc6HWoD0CdPxA3A==
=UBVO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* fix --enable-fuzzing linker failures (Alexander)
* target/i386: Add bus lock debug exception support (Chenyi)
* update documentation for preferred boolean option syntax (Daniel)
* make SCSI io_timeout configurable (Hannes)
* fix handling of guest recoverable SCSI errors (myself)
* misc fixes (Pavel, Zheng Zhan Liang, Zihao)
* fix installation of binaries with entitlements (Akihiko)
# gpg: Signature made Thu 25 Feb 2021 14:41:56 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (29 commits)
tcg/i386: rdpmc: fix the the condtions
chardev: do not use short form boolean options in non-QemuOpts character device descriptions
vl: deprecate -writeconfig
target/i386: Add bus lock debug exception support
qom/object.c: Fix typo
target/i386: update to show preferred boolean syntax for -cpu
docs: update to show preferred boolean syntax for -cpu
docs: update to show preferred boolean syntax for -vnc
docs: update to show preferred boolean syntax for -chardev
qemu-options: update to show preferred boolean syntax for -vnc
qemu-options: update to show preferred boolean syntax for -incoming
qemu-options: update to show preferred boolean syntax for -netdev
qemu-options: update to show preferred boolean syntax for -spice
qemu-options: update to show preferred boolean syntax for -chardev
gdbstub: use preferred boolean option syntax
char: don't fail when client is not connected
scsi: drop 'result' argument from command_complete callback
scsi-disk: pass guest recoverable errors through even for rerror=stop
scsi-disk: pass SCSI status to scsi_handle_rw_error
scsi: introduce scsi_sense_from_errno()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Options such as "-gdb" or "-serial" accept a part-QemuOpts part-parsed-by-hand
character device description. Do not use short form boolean options in the
QemuOpts part.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"+foo" or "-foo"
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-11-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-8-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a band-aid with a TODO for cases when QEMU doesn't start due
to missing VirGL. Longer term we could do with some proper feature
probing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210222101455.12640-4-alex.bennee@linaro.org>
Fedora 33 was released on October 27, 2020.
Update all the Fedora 32 images to this new release.
Suggested-by: Daniel Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210118181255.314672-1-philmd@redhat.com>
Message-Id: <20210222101455.12640-3-alex.bennee@linaro.org>
Blink and you miss the cross TCG compiler stuff so lets display it
with the rest of the compiler information.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210222101455.12640-2-alex.bennee@linaro.org>
update golden master acpi tables and empty
bios-tables-test-allowed-diff.h.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <de5a7f88563d39ed0cec34ff1d4cd6a1bdc927f0.1613615732.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <5ef9a81e49793afb42ffd19bbf1f44e269c65e93.1613615732.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <22f774a51255af1608b07b00b257af426adcf4ab.1613615732.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following tests will modify acpi tables.
prepare qtests to allow acpi table change.
add new tables for new tests.
- tests/data/acpi/pc/DSDT.nohpet
- tests/data/acpi/pc/FACP.nosmm
- tests/data/acpi/q35/DSDT.nohpet
- tests/data/acpi/q35/FACP.nosmm
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <c8285f54deab362ed839d31f0fb5bb590ab71fdd.1613615732.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
Message-Id: <1612490205-48788-2-git-send-email-wangxingang5@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
