Commit Graph

96421 Commits

Author SHA1 Message Date
Jonathan Cameron
3546b0529a tests/acpi: Update q35/CEDT.cxl for new memory addresses.
The CEDT table includes addreses of host bridge registers.
There are allocated in a different order due to the previous
patch, so update to the table is needed.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Jonathan Cameron
7bd1900b36 pci/pci_expander_bridge: For CXL HB delay the HB register memory region setup.
As the CXLState will no long be accessible via MachineState
at time of PXB_CXL realization, come back later from the machine specific
code to fill in the missing memory region setup. Only at this stage
is it possible to check if cxl=on, so that check is moved to this
later point.

Note that for multiple host bridges, the allocation order of the
register spaces is changed. This will be reflected in ACPI CEDT.

Stubs are added to handle case of CONFIG_PXB=n for machines that
call these functions.

The bus walking logic is common to all machines so add a utility
function + stub to cxl-host*.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Jonathan Cameron
96f7da1711 tests/acpi: Allow modification of q35 CXL CEDT table.
Needed to allow memory address changes as a result of next patch.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Jonathan Cameron
dab390ff24 hw/cxl: Push linking of CXL targets into i386/pc rather than in machine.c
Whilst here take the oportunity to shorten the function name.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Jonathan Cameron
513598050a hw/acpi/cxl: Pass in the CXLState directly rather than MachineState
Refactoring step on path to moving all CXL state out of
MachineState.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Jonathan Cameron
03b39fcf64 hw/cxl: Make the CXL fixed memory window setup a machine parameter.
Paolo Bonzini requested this change to simplify the ongoing
effort to allow machine setup entirely via RPC.

Includes shortening the command line form cxl-fixed-memory-window
to cxl-fmw as the command lines are extremely long even with this
change.

The json change is needed to ensure that there is
a CXLFixedMemoryWindowOptionsList even though the actual
element in the json is never used. Similar to existing
SgxEpcProperties.

Update qemu-options.hx to reflect that this is now a -machine
parameter.  The bulk of -M / -machine parameters are documented
under machine, so use that in preference to M.

Update cxl-test and bios-tables-test to reflect new parameters.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Message-Id: <20220608145440.26106-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
92344e76b8 x86: acpi-build: do not include hw/isa/isa.h directly
the last remaining dependency on ISA in acpi-build.c
is iapc_boot_arch_8042() which pulls in in isa.h
in its own header hw/input/i8042.h. Clean up
not longer needed direct inclusion of isa.h in
acpi-build.c

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-36-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
f3115cdd9c tests: acpi: update expected DSDT.tis.tpm2/DSDT.tis.tpm12 blobs
expected move of tmp-tis device description directly under
Device(ISA) node.

for tpm-tis 2.0:

  @@ -145,6 +145,189 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC    ", 0x00000001)
           {
               Name (_ADR, 0x001F0000)  // _ADR: Address
               OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C)
  +            Device (TPM)
  +            {
  +                Name (_HID, "MSFT0101" /* TPM 2.0 Security Device */)  // _HID: Hardware ID
  +                Name (_STR, "TPM 2.0 Device")  // _STR: Description String
  +                Name (_UID, One)  // _UID: Unique ID
  +                Name (_STA, 0x0F)  // _STA: Status
    ...
  +            }

  @@ -3281,189 +3464,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC    ", 0x00000001)
               Method (PCNT, 0, NotSerialized)
               {
               }
  -
  -            Device (TPM)
  -            {
  -                Name (_HID, "MSFT0101" /* TPM 2.0 Security Device */)  // _HID: Hardware ID
  -                Name (_STR, "TPM 2.0 Device")  // _STR: Description String
  -                Name (_UID, One)  // _UID: Unique ID
  -                Name (_STA, 0x0F)  // _STA: Status
    ...
  -            }

for tpm-tis 1.2:

  @@ -145,6 +145,188 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC    ", 0x00000001)
           {
               Name (_ADR, 0x001F0000)  // _ADR: Address
               OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C)
  +            Device (TPM)
  +            {
  +                Name (_HID, EisaId ("PNP0C31"))  // _HID: Hardware ID
  +                Name (_UID, One)  // _UID: Unique ID
  +                Name (_STA, 0x0F)  // _STA: Status
    ...
  +            }

  @@ -3281,188 +3463,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC    ", 0x00000001)
               Method (PCNT, 0, NotSerialized)
               {
               }
  -
  -            Device (ISA.TPM)
  -            {
  -                Name (_HID, EisaId ("PNP0C31"))  // _HID: Hardware ID
  -                Name (_UID, One)  // _UID: Unique ID
  -                Name (_STA, 0x0F)  // _STA: Status
    ...
  -            }

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220608135340.3304695-35-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
168e3aa7ac acpi: tpm-tis: use AcpiDevAmlIfClass:build_dev_aml to provide device's AML
.. and clean up not longer needed conditionals in DSTD build code
tpm-tis AML will be fetched and included when ISA bridge will
build its own AML code (including attached devices).

Expected AML change:
    the device under separate _SB.PCI0.ISA scope is moved directly
    under Device(ISA) node.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-34-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
d3ecb22c93 acpi: pc/q35: remove not needed 'if' condition on pci bus
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-33-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
5198d7939c acpi: pc/q35: tpm-tis: fix TPM device scope
tpm-tis 2.0, is not a PCI device but ISA one, move it
under ISA scope to fix incorrect placement.

Fixes: 24cf5413aa (acpi: Make TPM 2.0 with TIS available as MSFT0101)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-32-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
a5bf52d21c tests: acpi: white-list DSDT.tis.tpm2/DSDT.tis.tpm12 expected blobs
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220608135340.3304695-31-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
d09ac1167e tests: acpi: update expected DSDT.pvpanic-isa blob
@@ -145,6 +145,37 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC    ", 0x00000001)
         {
             Name (_ADR, 0x001F0000)  // _ADR: Address
             OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C)
+            Device (PEVT)
+            {
+                Name (_HID, "QEMU0001")  // _HID: Hardware ID
+                Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                {
+                    IO (Decode16,
+                        0x0505,             // Range Minimum
+                        0x0505,             // Range Maximum
+                        0x01,               // Alignment
+                        0x01,               // Length
+                        )
+                })
+                OperationRegion (PEOR, SystemIO, 0x0505, One)
+                Field (PEOR, ByteAcc, NoLock, Preserve)
+                {
+                    PEPT,   8
+                }
+
+                Name (_STA, 0x0F)  // _STA: Status
+                Method (RDPT, 0, NotSerialized)
+                {
+                    Local0 = PEPT /* \_SB_.PCI0.ISA_.PEVT.PEPT */
+                    Return (Local0)
+                }
+
+                Method (WRPT, 1, NotSerialized)
+                {
+                    PEPT = Arg0
+                }
+            }
+
             Device (KBD)
             {
                 Name (_HID, EisaId ("PNP0303") /* IBM Enhanced Keyboard (101/102-key, PS/2 Mouse) */)  // _HID: Hardware ID
@@ -3246,40 +3277,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC    ", 0x00000001)
         }
     }

-    Scope (\_SB.PCI0.ISA)
-    {
-        Device (PEVT)
-        {
-            Name (_HID, "QEMU0001")  // _HID: Hardware ID
-            Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
-            {
-                IO (Decode16,
-                    0x0505,             // Range Minimum
-                    0x0505,             // Range Maximum
-                    0x01,               // Alignment
-                    0x01,               // Length
-                    )
-            })
-            OperationRegion (PEOR, SystemIO, 0x0505, One)
-            Field (PEOR, ByteAcc, NoLock, Preserve)
-            {
-                PEPT,   8
-            }
-
-            Name (_STA, 0x0F)  // _STA: Status
-            Method (RDPT, 0, NotSerialized)
-            {
-                Local0 = PEPT /* \_SB_.PCI0.ISA_.PEVT.PEPT */
-                Return (Local0)
-            }
-
-            Method (WRPT, 1, NotSerialized)
-            {
-                PEPT = Arg0
-            }
-        }
-    }
-
     Scope (\_SB)
     {
         Scope (PCI0)

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220608135340.3304695-30-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
ff36e90e7c acpi: pvpanic-isa: use AcpiDevAmlIfClass:build_dev_aml to provide device's AML
.. and clean up not longer needed conditionals in DSTD build code
pvpanic-isa AML will be fetched and included when ISA bridge will
build its own AML code (including attached devices).

Expected AML change:
   the device under separate _SB.PCI0.ISA scope is moved directly
   under Device(ISA) node.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-29-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
fd7bcffe59 tests: acpi: add pvpanic-isa: testcase
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-28-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
7a3048d596 tests: acpi: white-lists expected DSDT.pvpanic-isa blob
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220608135340.3304695-27-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
ec66dbc753 tests: acpi: update expected blobs
@@ -145,6 +145,23 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC    ", 0x00000001)
         {
             Name (_ADR, 0x001F0000)  // _ADR: Address
             OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C)
+            Device (SMC)
+            {
+                Name (_HID, EisaId ("APP0001"))  // _HID: Hardware ID
+                Name (_STA, 0x0B)  // _STA: Status
+                Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                {
+                    IO (Decode16,
+                        0x0300,             // Range Minimum
+                        0x0300,             // Range Maximum
+                        0x01,               // Alignment
+                        0x20,               // Length
+                        )
+                    IRQNoFlags ()
+                        {6}
+                })
+            }
+
             Device (KBD)
             {
                 Name (_HID, EisaId ("PNP0303") /* IBM Enhanced Keyboard (101/102-key, PS/2 Mouse) */)  // _HID: Hardware ID
@@ -3246,26 +3263,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC    ", 0x00000001)
         }
     }

-    Scope (\_SB.PCI0.ISA)
-    {
-        Device (SMC)
-        {
-            Name (_HID, EisaId ("APP0001"))  // _HID: Hardware ID
-            Name (_STA, 0x0B)  // _STA: Status
-            Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
-            {
-                IO (Decode16,
-                    0x0300,             // Range Minimum
-                    0x0300,             // Range Maximum
-                    0x01,               // Alignment
-                    0x20,               // Length
-                    )
-                IRQNoFlags ()
-                    {6}
-            })
-        }
-    }
-
     Scope (\_SB)
     {
         Scope (PCI0)

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220608135340.3304695-26-imammedo@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
1d7ea91500 acpi: applesmc: use AcpiDevAmlIfClass:build_dev_aml to provide device's AML
.. and clean up not longer needed conditionals in DSTD build
code. applesmc AML will be fetched and included when ISA bridge
will build its own AML code (incl. attached devices).

Expected AML change:
the device under separate _SB.PCI0.ISA scope is moved directly
under Device(ISA) node.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-25-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
cde55744e9 tests: acpi: add applesmc testcase
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-24-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
39728badab tests: acpi: add and white-list DSDT.applesmc expected blob
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220608135340.3304695-23-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
8796f60fbf tests: acpi: update expected blobs
Expected AML change:
ISA devices under separate _SB.PCI0.ISA scope are moved
directly under Device(ISA) node.

Example from PC machine, and q35 have similar changes:

         {
             Name (_ADR, 0x00010000)  // _ADR: Address
             OperationRegion (P40C, PCI_Config, 0x60, 0x04)
-        }
-    }
-
-    Scope (_SB.PCI0.ISA)
-    {
-        Device (KBD)
-        {
-            Name (_HID, EisaId ("PNP0303") /* IBM Enhanced Keyboard (101/102-key, PS/2 Mouse) */)  // _HID: Hardware ID
-            Name (_STA, 0x0F)  // _STA: Status
-            Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+            Device (KBD)
             {
-                IO (Decode16,
-                    0x0060,             // Range Minimum
-                    0x0060,             // Range Maximum
-                    0x01,               // Alignment
-                    0x01,               // Length
-                    )
-                IO (Decode16,
-                    0x0064,             // Range Minimum
-                    0x0064,             // Range Maximum
-                    0x01,               // Alignment
-                    0x01,               // Length
-                    )
-                IRQNoFlags ()
-                    {1}
-            })
-        }
-
-        Device (MOU)
-        {
-            Name (_HID, EisaId ("PNP0F13") /* PS/2 Mouse */)  // _HID: Hardware ID
-            Name (_STA, 0x0F)  // _STA: Status
-            Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
-            {
-                IRQNoFlags ()
-                    {12}
-            })
-        }
+                Name (_HID, EisaId ("PNP0303") /* IBM Enhanced Keyboard (101/102-key, PS/2 Mouse) */)  // _HID: Hardware ID
+                Name (_STA, 0x0F)  // _STA: Status
+                Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                {
+                    IO (Decode16,
+                        0x0060,             // Range Minimum
+                        0x0060,             // Range Maximum
+                        0x01,               // Alignment
+                        0x01,               // Length
+                        )
+                    IO (Decode16,
+                        0x0064,             // Range Minimum
+                        0x0064,             // Range Maximum
+                        0x01,               // Alignment
+                        0x01,               // Length
+                        )
+                    IRQNoFlags ()
+                        {1}
+                })
+            }

-        Device (FDC0)
-        {
-            Name (_HID, EisaId ("PNP0700"))  // _HID: Hardware ID
-            Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
-            {
-                IO (Decode16,
-                    0x03F2,             // Range Minimum
-                    0x03F2,             // Range Maximum
-                    0x00,               // Alignment
-                    0x04,               // Length
-                    )
-                IO (Decode16,
-                    0x03F7,             // Range Minimum
-                    0x03F7,             // Range Maximum
-                    0x00,               // Alignment
-                    0x01,               // Length
-                    )
-                IRQNoFlags ()
-                    {6}
-                DMA (Compatibility, NotBusMaster, Transfer8, )
-                    {2}
-            })
-            Device (FLPA)
+            Device (MOU)
             {
-                Name (_ADR, Zero)  // _ADR: Address
-                Name (_FDI, Package (0x10)  // _FDI: Floppy Drive Information
+                Name (_HID, EisaId ("PNP0F13") /* PS/2 Mouse */)  // _HID: Hardware ID
+                Name (_STA, 0x0F)  // _STA: Status
+                Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
                 {
-                    Zero,
-                    0x05,
-                    0x4F,
-                    0x30,
-                    One,
-                    0xAF,
-                    0x02,
-                    0x25,
-                    0x02,
-                    0x12,
-                    0x1B,
-                    0xFF,
-                    0x6C,
-                    0xF6,
-                    0x0F,
-                    0x08
+                    IRQNoFlags ()
+                        {12}
                 })
             }

-            Name (_FDE, Buffer (0x14)  // _FDE: Floppy Disk Enumerate
+            Device (FDC0)
             {
-                /* 0000 */  0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  // ........
-                /* 0008 */  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  // ........
-                /* 0010 */  0x02, 0x00, 0x00, 0x00                           // ....
-            })
-        }
+                Name (_HID, EisaId ("PNP0700"))  // _HID: Hardware ID
+                Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                {
+                    IO (Decode16,
+                        0x03F2,             // Range Minimum
+                        0x03F2,             // Range Maximum
+                        0x00,               // Alignment
+                        0x04,               // Length
+                        )
+                    IO (Decode16,
+                        0x03F7,             // Range Minimum
+                        0x03F7,             // Range Maximum
+                        0x00,               // Alignment
+                        0x01,               // Length
+                        )
+                    IRQNoFlags ()
+                        {6}
+                    DMA (Compatibility, NotBusMaster, Transfer8, )
+                        {2}
+                })
+                Device (FLPA)
+                {
+                    Name (_ADR, Zero)  // _ADR: Address
+                    Name (_FDI, Package (0x10)  // _FDI: Floppy Drive Information
+                    {
+                        Zero,
+                        0x05,
+                        0x4F,
+                        0x30,
+                        One,
+                        0xAF,
+                        0x02,
+                        0x25,
+                        0x02,
+                        0x12,
+                        0x1B,
+                        0xFF,
+                        0x6C,
+                        0xF6,
+                        0x0F,
+                        0x08
+                    })
+                }

-        Device (LPT1)
-        {
-            Name (_HID, EisaId ("PNP0400") /* Standard LPT Parallel Port */)  // _HID: Hardware ID
-            Name (_UID, One)  // _UID: Unique ID
-            Name (_STA, 0x0F)  // _STA: Status
-            Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                Name (_FDE, Buffer (0x14)  // _FDE: Floppy Disk Enumerate
+                {
+                    /* 0000 */  0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  // ........
+                    /* 0008 */  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  // ........
+                    /* 0010 */  0x02, 0x00, 0x00, 0x00                           // ....
+                })
+            }
+
+            Device (LPT1)
             {
-                IO (Decode16,
-                    0x0378,             // Range Minimum
-                    0x0378,             // Range Maximum
-                    0x08,               // Alignment
-                    0x08,               // Length
-                    )
-                IRQNoFlags ()
-                    {7}
-            })
-        }
+                Name (_HID, EisaId ("PNP0400") /* Standard LPT Parallel Port */)  // _HID: Hardware ID
+                Name (_UID, One)  // _UID: Unique ID
+                Name (_STA, 0x0F)  // _STA: Status
+                Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                {
+                    IO (Decode16,
+                        0x0378,             // Range Minimum
+                        0x0378,             // Range Maximum
+                        0x08,               // Alignment
+                        0x08,               // Length
+                        )
+                    IRQNoFlags ()
+                        {7}
+                })
+            }

-        Device (COM1)
-        {
-            Name (_HID, EisaId ("PNP0501") /* 16550A-compatible COM Serial Port */)  // _HID: Hardware ID
-            Name (_UID, One)  // _UID: Unique ID
-            Name (_STA, 0x0F)  // _STA: Status
-            Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+            Device (COM1)
             {
-                IO (Decode16,
-                    0x03F8,             // Range Minimum
-                    0x03F8,             // Range Maximum
-                    0x00,               // Alignment
-                    0x08,               // Length
-                    )
-                IRQNoFlags ()
-                    {4}
-            })
-        }
+                Name (_HID, EisaId ("PNP0501") /* 16550A-compatible COM Serial Port */)  // _HID: Hardware ID
+                Name (_UID, One)  // _UID: Unique ID
+                Name (_STA, 0x0F)  // _STA: Status
+                Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                {
+                    IO (Decode16,
+                        0x03F8,             // Range Minimum
+                        0x03F8,             // Range Maximum
+                        0x00,               // Alignment
+                        0x08,               // Length
+                        )
+                    IRQNoFlags ()
+                        {4}
+                })
+            }

-        Device (RTC)
-        {
-            Name (_HID, EisaId ("PNP0B00") /* AT Real-Time Clock */)  // _HID: Hardware ID
-            Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+            Device (RTC)
             {
-                IO (Decode16,
-                    0x0070,             // Range Minimum
-                    0x0070,             // Range Maximum
-                    0x01,               // Alignment
-                    0x08,               // Length
-                    )
-                IRQNoFlags ()
-                    {8}
-            })
+                Name (_HID, EisaId ("PNP0B00") /* AT Real-Time Clock */)  // _HID: Hardware ID
+                Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                {
+                    IO (Decode16,
+                        0x0070,             // Range Minimum
+                        0x0070,             // Range Maximum
+                        0x01,               // Alignment
+                        0x08,               // Length
+                        )
+                    IRQNoFlags ()
+                        {8}
+                })
+            }
         }
     }

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220609115113.3478093-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
887e8e9d3a acpi: q35: isa bridge: use AcpiDevAmlIf interface to build ISA device descriptors
replaces adhoc build_isa_devices_aml() with generic AcpiDevAmlIf
way to build bridge AML including all devices that are attached
to its ISA bus.

Later when PCI is converted to AcpiDevAmlIf, build_q35_isa_bridge()
will also be dropped since PCI parts itself will take care of
building device prologue/epilogue AML for each enumerated PCI device.

Expected AML change is contextual, where ISA devices are moved from
separately declared _SB.PCI0.ISA scope, directly under Device(ISA)
node.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-21-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
92ea7fb3fe acpi: pc: isa bridge: use AcpiDevAmlIf interface to build ISA device descriptors
replaces ad-hoc build_isa_devices_aml() with generic AcpiDevAmlIf
way to build bridge AML including all devices that are attached to
its ISA bus.

Later when PCI is converted to AcpiDevAmlIf, build_piix4_isa_bridge()
will also be dropped since PCI parts itself will take care of
building device prologue/epilogue AML for each enumerated PCI
device.

Expected AML change is contextual, where ISA devices are moved
from separately declared _SB.PCI0.ISA scope , directly under
Device(ISA) node.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-20-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
6a4b286ced tests: acpi: white-list to be re-factored pc/q35 DSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220609114855.3477822-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
38003951b5 q35: acpi: drop not needed PCMachineClass::do_not_add_smb_acpi
by default we do not version ACPI AML as it's considered
a part of firmware. Drop do_not_add_smb_acpi that blocked
SMBUS AML description on 3.1 and older machine types without
providing justification.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-18-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
5876d9b53f acpi: ipmi: use AcpiDevAmlIf interface to build IPMI device descriptors
convert ad-hoc way we use to generate AML for ISA/SMB IPMI devices
to a generic approach (i.e. make devices provide its own AML blobs
like it is done with other ISA devices (ex. KBD))

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-17-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Igor Mammedov
4b66ddcc4d acpi: ich9-smb: add support for AcpiDevAmlIf interface
wire AcpiDevAmlIf interface to build ich9-smb and its slave
devices AML. It will be used by followup patches to switch
from creating AML in ad-hoc way to a more systematic one
that will scan present devices and ask them to provide
their AML code like it's done with ISA devices.

This patch is a partial conversion, as it only fetches
AML from slave devices attached to its I2C bus.

The conversion will be completed when PCI bus is
switched to use AcpiDevAmlIf and build_smb0() could be
dropped.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-16-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:48 -04:00
Igor Mammedov
0f5b3fd748 tests: acpi: update expected DSDT.ipmismbus blob
expected AML change:
         Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
         {
            I2cSerialBusV2 (0x0000, ControllerInitiated, 0x000186A0,
    -           AddressingMode7Bit, "\\_SB.PCI0.SMB0",
    +           AddressingMode7Bit, "^",
                0x00, ResourceProducer, , Exclusive,
                )
          })

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220608135340.3304695-15-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:48 -04:00
Igor Mammedov
ea01c52291 ipmi: acpi: use relative path to resource source
smbus-ipmi AML description needs to specify a path to its parent
node in _CRS. The rest of IPMI inplementations (ISA based)
do not need path at all. Instead of passing through a full path
use relative path to point to smbus-ipmi's parent node, it will
let follow up patches to create IPMI device AML in a generic
way instead of current ad-hoc way. (i.e. AML will be generated
the same way it's done for other ISA device, and smbus will be
converted to generate AML for its slave devices the same way
as ISA)

expected AML change:
     Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
     {
        I2cSerialBusV2 (0x0000, ControllerInitiated, 0x000186A0,
-           AddressingMode7Bit, "\\_SB.PCI0.SMB0",
+           AddressingMode7Bit, "^",
            0x00, ResourceProducer, , Exclusive,
            )
      })

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-14-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:48 -04:00
Igor Mammedov
4ccf0937a4 tests: acpi: whitelist DSDT.ipmismbus expected blob
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220608135340.3304695-13-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:48 -04:00
Igor Mammedov
f4e2fb67bc tests: acpi: update expected blob DSDT.ipmismbus
basic q35 DSDT with an extra device node:

  Device (MI1)
    {
        Name (_HID, EisaId ("IPI0001"))  // _HID: Hardware ID
        Name (_STR, "ipmi_smbus")  // _STR: Description String
        Name (_UID, One)  // _UID: Unique ID
        Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
        {
      I2cSerialBusV2 (0x0000, ControllerInitiated, 0x000186A0,
          AddressingMode7Bit, "\\_SB.PCI0.SMB0",
          0x00, ResourceProducer, , Exclusive,
          )
        })
        Name (_IFT, 0x04)  // _IFT: IPMI Interface Type
        Name (_SRV, 0x0200)  // _SRV: IPMI Spec Revision
    }

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220608135340.3304695-12-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:48 -04:00
Igor Mammedov
ac70b4a3f1 tests: acpi: q35: add test for smbus-ipmi device
expected new device node:

    Device (MI1)
    {
        Name (_HID, EisaId ("IPI0001"))  // _HID: Hardware ID
        Name (_STR, "ipmi_smbus")  // _STR: Description String
        Name (_UID, One)  // _UID: Unique ID
        Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
        {
            I2cSerialBusV2 (0x0000, ControllerInitiated, 0x000186A0,
                AddressingMode7Bit, "\\_SB.PCI0.SMB0",
                0x00, ResourceProducer, , Exclusive,
                )
        })
        Name (_IFT, 0x04)  // _IFT: IPMI Interface Type
        Name (_SRV, 0x0200)  // _SRV: IPMI Spec Revision
    }

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:48 -04:00
Igor Mammedov
dc35bfb6e0 tests: acpi: add and whitelist DSDT.ipmismbus expected blob
.. which will be used by follow up smbus-ipmi test-case

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220608135340.3304695-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:48 -04:00
Igor Mammedov
a576158ee9 isa-bus: drop no longer used ISADeviceClass::build_aml
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:48 -04:00
Igor Mammedov
68f01317b4 acpi: pckbd: replace ISADeviceClass::build_aml with AcpiDevAmlIfClass:build_dev_aml
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:48 -04:00
Igor Mammedov
d9cf178cc0 acpi: mc146818rtc: replace ISADeviceClass::build_aml with AcpiDevAmlIfClass:build_dev_aml
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:48 -04:00
Igor Mammedov
0d170dc13c acpi: serial-is: replace ISADeviceClass::build_aml with AcpiDevAmlIfClass:build_dev_aml
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:48 -04:00
Igor Mammedov
ef26fc47ba acpi: parallel port: replace ISADeviceClass::build_aml with AcpiDevAmlIfClass:build_dev_aml
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:48 -04:00
Igor Mammedov
e7c72a678a acpi: fdc-isa: replace ISADeviceClass::build_aml with AcpiDevAmlIfClass:build_dev_aml
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:48 -04:00
Igor Mammedov
f974e0b75b acpi: make isa_build_aml() support AcpiDevAmlIf interface
To allow incremental conversion from ISADeviceClass::build_aml
to AcpiDevAmlIf, add support for the later without removing
the former. Once conversion is complete, another commit will
drop ISADeviceClass::build_aml related code.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:48 -04:00
Igor Mammedov
23609e47c0 acpi: add interface to build device specific AML
There is already ISADeviceClass::build_aml() callback which
builds device specific AML blob for some ISA devices.
To extend the same idea to other devices, add TYPE_ACPI_DEV_AML_IF
Interface that will provide a more generic callback which
will be used not only for ISA but other devices. It will
allow get rid of some data-mining and ad-hoc AML building,
by asking device(s) to generate its own AML blob like it's
done for ISA devices.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:48 -04:00
Richard Henderson
6d940eff47 Merge tpm 2022/06/07 v1
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmKf8HgACgkQda1lgCoL
 QhHx8Qf/QB2z+0B1xKKn8NqrWbZ+FaVlnPu/3hX4kraCY5zAYV9e64kdWhuIKRbM
 74/KARGMpkme6Y8rUSK6mVeiY+ul+egfVMnKyfhsM1jhAQT/DzSlht/XZzbn3Mg+
 FFXQBMqcvcNWH53q9zi9GJYqH4tcxUku3ejgodU4+SO2wB5S59pS/tD+i5H06Vy5
 Iw1kW6I11gYhJGETxVgb6F2Jfyu6uPWFhIg7eN06XwNExFc45E8GjrpIs2rO78GN
 OzMBjwAG+C+/PU+UZDOd5Zhq5qv+8DcvDQuPXyqksxPcFvouvLghQvQL/h7neMlM
 jOwHS153ay0EAT/t2lZafsBwqKQxvQ==
 =b9Qe
 -----END PGP SIGNATURE-----

Merge tag 'pull-tpm-2022-06-07-1' of https://github.com/stefanberger/qemu-tpm into staging

Merge tpm 2022/06/07 v1

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmKf8HgACgkQda1lgCoL
# QhHx8Qf/QB2z+0B1xKKn8NqrWbZ+FaVlnPu/3hX4kraCY5zAYV9e64kdWhuIKRbM
# 74/KARGMpkme6Y8rUSK6mVeiY+ul+egfVMnKyfhsM1jhAQT/DzSlht/XZzbn3Mg+
# FFXQBMqcvcNWH53q9zi9GJYqH4tcxUku3ejgodU4+SO2wB5S59pS/tD+i5H06Vy5
# Iw1kW6I11gYhJGETxVgb6F2Jfyu6uPWFhIg7eN06XwNExFc45E8GjrpIs2rO78GN
# OzMBjwAG+C+/PU+UZDOd5Zhq5qv+8DcvDQuPXyqksxPcFvouvLghQvQL/h7neMlM
# jOwHS153ay0EAT/t2lZafsBwqKQxvQ==
# =b9Qe
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Jun 2022 05:42:32 PM PDT
# gpg:                using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE  C66B 75AD 6580 2A0B 4211

* tag 'pull-tpm-2022-06-07-1' of https://github.com/stefanberger/qemu-tpm:
  tpm_crb: mark command buffer as dirty on request completion
  hw/tpm/tpm_tis_common.c: Assert that locty is in range

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-07 19:22:18 -07:00
Anthony PERARD
e37a0ef460 tpm_crb: mark command buffer as dirty on request completion
At the moment, there doesn't seems to be any way to know that QEMU
made modification to the command buffer. This is potentially an issue
on Xen while migrating a guest, as modification to the buffer after
the migration as started could be ignored and not transfered to the
destination.

Mark the memory region of the command buffer as dirty once a request
is completed.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20220411144749.47185-1-anthony.perard@citrix.com
2022-06-07 20:37:25 -04:00
Richard Henderson
9b1f588549 Initial LoongArch support.
-----BEGIN PGP SIGNATURE-----
 
 iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmKeiRYdHHJpY2hhcmQu
 aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV85Kgf/buBy5+0y51NKOpTI
 zwFzvuQoWyMwb1nz1ag3i0Sk5fk72zmQI13fwfCgyUZckT165qISa2hohnzl4zVZ
 CO0uZl44makET+uqJn5h2VXSM7Wf+jv0UzbCElVQuEFt0t1bIPbco0pTx/TojBb+
 +YKN4jobvJiLVhD1wDVJqp/2r9gcnX11EWZk+ZC+pIiEqYZpWRcQdEGVh4Ymhig8
 0LK/8HRSyw0AecX/01hcGWvYCC0ldFicwN69AD42BqM+7WD+3jnV8FJL8qqq766G
 xuCNHz0eDcVgfw9bCEyhFmhgiBFvOXNCtyDOV0qVn7eee9nIrFZcsGyBqeI/T1el
 e7uz8Q==
 =l8TD
 -----END PGP SIGNATURE-----

Merge tag 'pull-la-20220606' of https://gitlab.com/rth7680/qemu into staging

Initial LoongArch support.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmKeiRYdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV85Kgf/buBy5+0y51NKOpTI
# zwFzvuQoWyMwb1nz1ag3i0Sk5fk72zmQI13fwfCgyUZckT165qISa2hohnzl4zVZ
# CO0uZl44makET+uqJn5h2VXSM7Wf+jv0UzbCElVQuEFt0t1bIPbco0pTx/TojBb+
# +YKN4jobvJiLVhD1wDVJqp/2r9gcnX11EWZk+ZC+pIiEqYZpWRcQdEGVh4Ymhig8
# 0LK/8HRSyw0AecX/01hcGWvYCC0ldFicwN69AD42BqM+7WD+3jnV8FJL8qqq766G
# xuCNHz0eDcVgfw9bCEyhFmhgiBFvOXNCtyDOV0qVn7eee9nIrFZcsGyBqeI/T1el
# e7uz8Q==
# =l8TD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Jun 2022 04:09:10 PM PDT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* tag 'pull-la-20220606' of https://gitlab.com/rth7680/qemu: (43 commits)
  target/loongarch: 'make check-tcg' support
  tests/tcg/loongarch64: Add hello/memory test in loongarch64 system
  target/loongarch: Add gdb support.
  hw/loongarch: Add LoongArch virt power manager support.
  hw/loongarch: Add LoongArch load elf function.
  hw/loongarch: Add LoongArch ls7a rtc device support
  hw/loongarch: Add some devices support for 3A5000.
  Enable common virtio pci support for LoongArch
  hw/loongarch: Add irq hierarchy for the system
  hw/intc: Add LoongArch extioi interrupt controller(EIOINTC)
  hw/intc: Add LoongArch ls7a msi interrupt controller support(PCH-MSI)
  hw/intc: Add LoongArch ls7a interrupt controller support(PCH-PIC)
  hw/loongarch: Add LoongArch ipi interrupt support(IPI)
  hw/loongarch: Add support loongson3 virt machine type.
  target/loongarch: Add timer related instructions support.
  target/loongarch: Add other core instructions support
  target/loongarch: Add TLB instruction support
  target/loongarch: Add LoongArch IOCSR instruction
  target/loongarch: Add LoongArch CSR instruction
  target/loongarch: Add constant timer support
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-06 16:16:01 -07:00
Song Gao
34bb43b074 target/loongarch: 'make check-tcg' support
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220606124333.2060567-44-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-06 18:14:13 +00:00
Xiaojuan Yang
c429333398 tests/tcg/loongarch64: Add hello/memory test in loongarch64 system
- We write a very minimal softmmu harness.
- This is a very simple smoke test with no need to run a full Linux/kernel.
- The Makefile.softmmu-target record the rule to run.

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-43-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-06 18:14:13 +00:00
Xiaojuan Yang
ca61e75071 target/loongarch: Add gdb support.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-42-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-06 18:14:13 +00:00
Xiaojuan Yang
9e6602d657 hw/loongarch: Add LoongArch virt power manager support.
This is a placeholder for missing ACPI, and will eventually be replaced.

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-41-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-06 18:14:13 +00:00
Xiaojuan Yang
6a6f26f481 hw/loongarch: Add LoongArch load elf function.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-40-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-06 18:14:13 +00:00
Xiaojuan Yang
c117f68a46 hw/loongarch: Add LoongArch ls7a rtc device support
This patch add ls7a rtc device support.

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-39-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-06 18:14:13 +00:00