Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-42-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cortex-M CPUs with MVE should advertise this fact to gdb, using the
org.gnu.gdb.arm.m-profile-mve XML feature, which defines the VPR
register. Presence of this feature also tells gdb to create
pseudo-registers Q0..Q7, so we do not need to tell gdb about them
separately.
Note that unless you have a very recent GDB that includes this fix:
http://patches-tcwg.linaro.org/patch/58133/ gdb will mis-print the
individual fields of the VPR register as zero (but showing the whole
thing as hex, eg with "print /x $vpr" will give the correct value).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211101160814.5103-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently we send VFP XML which includes D0..D15 or D0..D31, plus
FPSID, FPSCR and FPEXC. The upstream GDB tolerates this, but its
definition of this XML feature does not include FPSID or FPEXC. In
particular, for M-profile cores there are no FPSID or FPEXC
registers, so advertising those is wrong.
Move FPSID and FPEXC into their own bit of XML which we only send for
A and R profile cores. This brings our definition of the XML
org.gnu.gdb.arm.vfp feature into line with GDB's own (at least for
non-Neon cores...) and means we don't claim to have FPSID and FPEXC
on M-profile.
(It seems unlikely to me that any gdbstub users really care about
being able to look at FPEXC and FPSID; but we've supplied them to gdb
for a decade and it's not hard to keep doing so.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210921162901.17508-5-peter.maydell@linaro.org
Now that we have switched to generate the RISC-V CSR XML dynamically,
remove the built-in hardcoded XML files.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210116054123.5457-3-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This includes GDB hooks for reading from wnd wrtiting to AVR
registers, and xml register definition file as well.
[AM: Split a larger AVR introduction patch into logical units]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[thuth: Fixed avr_cpu_gdb_read_register() parameter]
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-7-huth@tuxfamily.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
GDB's remote protocol requires M-profile cores to use the feature
name 'org.gnu.gdb.arm.m-profile' instead of the 'org.gnu.gdb.arm.core'
feature used for A- and R-profile cores. We weren't doing this, which
meant GDB treated our M-profile cores like A-profile ones. This mostly
doesn't matter, but for instance means that it doesn't correctly
handle backtraces where an M-profile exception frame is involved.
Ship a copy of GDB's arm-m-profile.xml and use it on the M-profile
cores. The integer registers have the same offsets as the
arm-core.xml, but register 25 is the M-profile XPSR rather than the
A-profile CPSR, so we need to update arm_cpu_gdb_read_register() and
arm_cpu_gdb_write_register() to handle XSPR reads and writes.
Fixes: https://bugs.launchpad.net/qemu/+bug/1877136
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200507134755.13997-1-peter.maydell@linaro.org
Currently "cf-core.xml" is sent to GDB when using any m68k flavor. Thing is
it uses the "org.gnu.gdb.coldfire.core" feature name and gdb 8.3 then expects
a coldfire FPU instead of the default m68881 FPU.
This is not OK because the m68881 floats registers are 96 bits wide so it
crashes GDB with the following error message:
(gdb) target remote localhost:7960
Remote debugging using localhost:7960
warning: Register "fp0" has an unsupported size (96 bits)
warning: Register "fp1" has an unsupported size (96 bits)
...
Remote 'g' packet reply is too long (expected 148 bytes, got 180 bytes): \
00000000000[...]0000
With this patch: qemu-system-m68k -M none -cpu m68020 -s -S
(gdb) tar rem :1234
Remote debugging using :1234
warning: No executable has been specified and target does not support
determining executable automatically. Try using the "file" command.
0x00000000 in ?? ()
(gdb) p $fp0
$1 = nan(0xffffffffffffffff)
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1588094279-17913-3-git-send-email-frederic.konrad@adacore.com>
Message-Id: <20200430190122.4592-10-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use newer QOM style, split cpu-qom.h, restrict access to
extable array, use rx_cpu_tlb_fill() extracted from patch of
Yoshinori Sato 'Convert to CPUClass::tlb_fill', call cpu_reset
after qemu_init_vcpu, make rx_crname a function]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200224141923.82118-7-ysato@users.sourceforge.jp>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use GByteArray in gdbstub (rebase commit a010bdbe),
use device_class_set_parent_reset (rebase commit 781c67ca)]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This patch enables a debugger to read the current privilege level via a virtual
"priv" register. When compiled with CONFIG_USER_ONLY the register is still
visible but always reports the value zero.
Signed-off-by: Jonathan Behrens <jonathan@fintelia.io>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The machine description we send is being (silently) thrown on the floor
by GDB and GDB silently uses the default machine description, because
the xml parse fails on <feature> nested within <feature>.
Changes to the xml in qemu source code have no effect.
In addition, the default machine description has fs_base, which fails to
be retrieved, which breaks the whole register window. Add it and the
other control registers.
Signed-off-by: Doug Gale <doug16k@gmail.com>
Message-Id: <20190124040457.2546-1-doug16k@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an XML description for SSE registers (XMM+MXCSR) for both X86
and X86-64 architectures in the GDB stub:
- configure: Define gdb_xml_files for the X86 targets (32 and 64bit).
- gdb-xml/i386-32bit-sse.xml & gdb-xml/i386-64bit-sse.xml: The XML files
that contain a description of the XMM + MXCSR registers.
- gdb-xml/i386-32bit.xml & gdb-xml/i386-64bit.xml: wrappers that include
the XML file of the core registers and the other XML file of the SSE registers.
- target/i386/cpu.c: Modify the gdb_core_xml_file to the new XML wrapper,
modify the gdb_num_core_regs to fit the registers number defined in each
XML file.
Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements XML target description support for X86 and X86-64
architectures in the GDB stub, as the way with ARM and PowerPC:
- gdb-xml/32bit-core.xml & gdb-xml/64bit-core.xml: Adding the XML target
description files, these files are picked from GDB source code.
- configure: Define gdb_xml_files for X86 targets.
- target/i386/cpu.c: Define gdb_core_xml_file and gdb_arch_name to add
XML awareness for this architecture, modify the gdb_num_core_regs to
fit the registers number defined in each XML file.
Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com>
Message-Id: <2b3c8119-1602-28c7-eab4-296593877103@lauterbach.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the XML and functions to get and set VSX registers.
Signed-off-by: Anton Blanchard <anton@samba.org>
(fixed little-endian guests)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Let's expose some virtual/fake registers as virtualization specific
registers.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1443689387-34473-3-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's support reading and writing of control registers for kvm and tcg.
We have to take care of flushing the tlb (tcg) and pushing the changed
registers into kvm.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Include the vector registers XML file that is provided by gdb,
and can be used by the qemu gdbserver interface.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch adds the relevant s390x feature xml files taken from gdb.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Register the aarch64-fpu XML and implement the necessary
read/write handlers so we can support reading and writing
of FP registers in the gdb stub.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
We want to be able to debug AArch64 guests. So let's add the respective gdb
stub functions and xml descriptions that allow us to do so.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-12-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-6-git-send-email-john.rigby@linaro.org
[PMM: dropped unused fp regs XML for now; moved 64 bit only functions
to new gdbstub64.c; these are hooked up in AArch64CPU, not via
ifdefs in ARMCPU]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The powerpc xml files contained a hack--an empty, non-existent
register--for getting the register numbers to line up for
newer (XML-aware) and older (non-XML-aware) GDB. While this hack worked
in some cases, it didn't work in all cases, notably when the user used
`finish' or `continue': GDB would attempt to read the non-existent
register and QEMU would complain.
This patch fixes things up properly. Instead of inserting a fake
register, we explicitly declare the floating-point and SPE registers to
start at 71. This action accomplishes the same thing as the nasty hack,
except that now GDB never tries to fetch the non-existant register 70.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The current XML files claim, on floating point-supporting Power chips,
that $f0 is register 70. This would be fine, except that register 70
for non-XML-aware GDB is FPSCR. More importantly, 70 is less than
NUM_CORE_REGS (71) for Power, so a request for register 70 goes to the
"core" register reading routines, rather than the floating-point
register read routine we registered with gdb_register_coprocessor.
Therefore, when we are talking to an XML-aware GDB, we claim that
register has zero width, which causes the rest of QEMU's GDB stub to
send an error back to GDB, which causes GDB to be unable to read the
floating-point registers. (The problem is also present for SPE
registers and occurs in a slightly different way for Altivec registers.)
The best way to fix this is to have the "core register" XML files for
PPC32 and PPC64 claim that there is a 4-byte register 70, which causes
$f0 to be register 71, and everything works just fine from that point
forward.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6770 c046a42c-6fe2-441c-8c8c-71466251a162
different names confuses GDB, so use org.gnu.gdb.arm.vfp for all of them.
Signed-off-by: Paul Brook <paul@codesourcery.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6682 c046a42c-6fe2-441c-8c8c-71466251a162
These files are nearly identical to the XML files provided with GDB.
The only difference is that power-{fpu,spe}.xml do not assign register
numbers; the internal QEMU machinery takes care of that.
Define gdb_xml_files for ppc targets in configure as well.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6420 c046a42c-6fe2-441c-8c8c-71466251a162
