The SSE-300 has a Cortex-M55 (which was the whole reason for us
modelling it), but we forgot to actually update the code to let it
have a different CPU type from the IoTKit and SSE-200. Add CPU type
as a field for ARMSSEInfo instead of hardcoding it to always use a
Cortex-M33.
Buglink: https://bugs.launchpad.net/qemu/+bug/1923861
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416104010.13228-1-peter.maydell@linaro.org
SSE-300 currently shares the SSE-200 Property array. This is
bad principally because the default values of the CPU0_FPU
and CPU0_DSP properties disable the FPU and DSP on the CPU.
That is correct for the SSE-200 but not the SSE-300.
Give the SSE-300 its own Property array with the correct
SSE-300 specific settings:
* SSE-300 has only one CPU, so no CPU1* properties
* SSE-300 CPU has FPU and DSP
Buglink: https://bugs.launchpad.net/qemu/+bug/1923861
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210415182353.8173-1-peter.maydell@linaro.org
Mostly osdep.h puts the system includes at the top of the file; but
there are a couple of exceptions where we include a system header
halfway through the file. Move these up to the top with the rest
so that all the system headers we include are included before
we include os-win32.h or os-posix.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416135543.20382-4-peter.maydell@linaro.org
Message-id: 20210414184343.26235-1-peter.maydell@linaro.org
System headers may include templates if compiled with a C++ compiler,
which cause the compiler to complain if qemu/osdep.h is included
within a C++ source file's 'extern "C"' block. Add
an 'extern "C"' block directly to qemu/osdep.h, so that
system headers can be kept out of it.
There is a stray declaration early in qemu/osdep.h, which needs
to be special cased. Add a definition in qemu/compiler.h to
make it look nice.
config-host.h, CONFIG_TARGET, exec/poison.h and qemu/compiler.h
are included outside the 'extern "C"' block; that is not
an issue because they consist entirely of preprocessor directives.
This allows us to move the include of osdep.h in our two C++
source files outside the extern "C" block they were previously
using for it, which in turn means that they compile successfully
against newer versions of glib which insist that glib.h is
*not* inside an extern "C" block.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416135543.20382-3-peter.maydell@linaro.org
[PMM: Moved disas/arm-a64.cc osdep.h include out of its extern "C" block;
explained in commit message why we're doing this]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
glib-compat.h is sort of like a system header, and it needs to include
system headers (glib.h) that may dislike being included under
'extern "C"'. Move it right after all system headers and before
all other QEMU headers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416135543.20382-2-peter.maydell@linaro.org
[PMM: Added comment about why glib-compat.h is special]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ObjectType enum and ObjectOptions are included from qapi-types-qom.h
into common code. We should not use target-specific config switches like
CONFIG_VIRTIO_CRYPTO here, since this is not defined in common code and
thus the enum will look differently between common and target specific
code. For this case, it's hopefully enough to check for CONFIG_VHOST_CRYPTO
only (which is a host specific config switch, i.e. it's the same on all
targets).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210412160710.639800-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make virtio-fs take into account server capabilities.
Just returning requested features assumes they all of then are implemented
by server and results in setting unsupported configuration if some of them
are absent.
Signed-off-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With changes suggested by Stefan
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If on nbd_close() we detach the thread (in
nbd_co_establish_connection_cancel() thr->state becomes
CONNECT_THREAD_RUNNING_DETACHED), after that point we should not use
s->connect_thread (which is set to NULL), as running thread may free it
at any time.
Still nbd_co_establish_connection() does exactly this: it saves
s->connect_thread to local variable (just for better code style) and
use it even after yield point, when thread may be already detached.
Fix that. Also check thr to be non-NULL on
nbd_co_establish_connection() start for safety.
After this patch "case CONNECT_THREAD_RUNNING_DETACHED" becomes
impossible in the second switch in nbd_co_establish_connection().
Still, don't add extra abort() just before the release. If it somehow
possible to reach this "case:" it won't hurt. Anyway, good refactoring
of all this reconnect mess will come soon.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210406155114.1057355-1-vsementsov@virtuozzo.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Here's what I hope is the last ppc related pull request for qemu-6.0.
The 2 patches here revert a behavioural change that after further
discussion we concluded was a bad idea (adding a timeout for
possibly-failed hot unplug requests). Instead it implements a
different approach to the original problem: we again let unplug
requests the guest doesn't respond to remain pending indefinitely, but
no longer allow those to block attempts to retry the same unplug
again.
The change is a bit more complex than I'd like for this late in the
freeze. Nonetheless, I think it's important to merge this for 6.0, so
we don't allow a release which has the probably-a-bad-idea timeout
behaviour.
-----BEGIN PGP SIGNATURE-----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=fIJT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210412' into staging
ppc patch queue for 2021-04-21
Here's what I hope is the last ppc related pull request for qemu-6.0.
The 2 patches here revert a behavioural change that after further
discussion we concluded was a bad idea (adding a timeout for
possibly-failed hot unplug requests). Instead it implements a
different approach to the original problem: we again let unplug
requests the guest doesn't respond to remain pending indefinitely, but
no longer allow those to block attempts to retry the same unplug
again.
The change is a bit more complex than I'd like for this late in the
freeze. Nonetheless, I think it's important to merge this for 6.0, so
we don't allow a release which has the probably-a-bad-idea timeout
behaviour.
# gpg: Signature made Mon 12 Apr 2021 06:25:58 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dg-gitlab/tags/ppc-for-6.0-20210412:
spapr.c: always pulse guest IRQ in spapr_core_unplug_request()
spapr: rollback 'unplug timeout' for CPU hotunplugs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a TCG temporary leak when translating CACHE opcode.
Fixes: 0d74a222c2 ("make ITC Configuration Tags accessible to the CPU")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210406202857.1440744-1-f4bug@amsat.org>
When adding the Reset register in commit 5790b757cf we
forgot to migrate it.
While it is possible a VM using the PIIX4 is migrated just
after requesting a system shutdown, it is very unlikely.
However when restoring a migrated VM, we might have the
RCR bit #4 set on the stack and when the VM resume it
directly shutdowns.
Add a post_load() migration handler and set the default
RCR value to 0 for earlier versions, assuming the VM was
not going to shutdown before migration.
Fixes: 5790b757cf ("piix4: Add the Reset Control Register")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210324200334.729899-1-f4bug@amsat.org>
TYPE_VIA_PM calls apm_init() in via_pm_realize(), so
requires APM to be selected.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Fixes: dd0ff8191a ("isa: express SuperIO dependencies with Kconfig")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210302080531.913802-1-f4bug@amsat.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmB0xfgeHG1hcmsuY2F2
ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfoYsH/AgSa1ReFBRqa227
cjdD2KRhYDA4HLj2ukaLAEtgbz57RfNyrBtEDkLcgN+lFjBlWB/1QZDTWA844OZb
CkBm83jNMIXFpXknXBcMwGDJ7Yrnr1Cjc2AZwifyKswN7ILDtg1qsxu+aEO+L8v6
YysH8aqxxet4tjFLTS1tYFzPzb2W1dMrNR/fLYFYY5rjgW04UNZIHqw66lOkkGBH
wyO9dHr371B6b/40a99NBPOlxO/qfQCvIwk2FagmxBBmABRbWp8SIrNSDosFJ2md
LdeVukGaIexI5ylIn+bvTuoJcuuTIoqaiUd1KdrHptvt2sH3UUGE6hBRWso9saJL
1wZ3SI4=
=O+4q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20210412' into staging
qemu-sparc queue
# gpg: Signature made Mon 12 Apr 2021 23:13:12 BST
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-sparc-20210412:
tests/qtest: add tests for am53c974 device
esp: ensure that do_cmd is set to zero before submitting an ESP select command
esp: don't reset async_len directly in esp_select() if cancelling request
esp: don't overflow cmdfifo if TC is larger than the cmdfifo size
esp: don't overflow cmdfifo in get_cmd()
esp: don't underflow cmdfifo in do_cmd()
esp: ensure cmdfifo is not empty and current_dev is non-NULL
esp: introduce esp_fifo_pop_buf() and use it instead of fifo8_pop_buf()
esp: consolidate esp_cmdfifo_pop() into esp_fifo_pop()
esp: consolidate esp_cmdfifo_push() into esp_fifo_push()
esp: rework write_response() to avoid using the FIFO for DMA transactions
esp: always check current_req is not NULL before use in DMA callbacks
esp: fix setting of ESPState mig_version_id when launching QEMU with -S option
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These sections need to be wrapped in a block-level element, such as
Paragraph in order for them to be rendered into Texinfo correctly.
Before (e.g.):
<section ids="qapidoc-713">
<title>If</title>
<literal>defined(CONFIG_REPLICATION)</literal>
</section>
became:
.SS If
\fBdefined(CONFIG_REPLICATION)\fP.SS \fBBlockdevOptionsReplication\fP (Object)
...
After:
<section ids="qapidoc-713">
<title>If</title>
<paragraph>
<literal>defined(CONFIG_REPLICATION)</literal>
</paragraph>
</section>
becomes:
.SS If
.sp
\fBdefined(CONFIG_REPLICATION)\fP
.SS \fBBlockdevOptionsReplication\fP (Object)
...
Reported-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210406141909.1992225-2-jsnow@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the autogenerated fuzzer test cases as the basis for a set of am53c974
regression tests.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-13-mark.cave-ayland@ilande.co.uk>
When a CDB has been received and is about to be submitted to the SCSI layer
via one of the ESP select commands, ensure that do_cmd is set to zero before
executing the command.
Otherwise a guest executing 2 valid CDBs in quick sequence can invoke the SCSI
.transfer_data callback again before do_cmd is set to zero by the callback
function triggering an assert at the start of esp_transfer_data().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210407195801.685-12-mark.cave-ayland@ilande.co.uk>
Instead let the SCSI layer invoke the .cancel callback itself to cancel and
reset the request state.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210407195801.685-11-mark.cave-ayland@ilande.co.uk>
If a guest transfers the message out/command phase data using DMA with a TC
that is larger than the cmdfifo size then the cmdfifo overflows triggering
an assert. Limit the size of the transfer to the free space available in
cmdfifo.
Buglink: https://bugs.launchpad.net/qemu/+bug/1919036
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-10-mark.cave-ayland@ilande.co.uk>
If the guest tries to read a CDB using DMA and cmdfifo is not empty then it is
possible to overflow cmdfifo.
Since this can only occur by issuing deliberately incorrect instruction
sequences, ensure that the maximum length of the CDB transferred to cmdfifo is
limited to the available free space within cmdfifo.
Buglink: https://bugs.launchpad.net/qemu/+bug/1909247
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-9-mark.cave-ayland@ilande.co.uk>
If the guest tries to execute a CDB when cmdfifo is not empty before the start
of the message out phase then clearing the message out phase data will cause
cmdfifo to underflow due to cmdfifo_cdb_offset being larger than the amount of
data within.
Since this can only occur by issuing deliberately incorrect instruction
sequences, ensure that the maximum length of esp_fifo_pop_buf() is limited to
the size of the data within cmdfifo.
Buglink: https://bugs.launchpad.net/qemu/+bug/1909247
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-8-mark.cave-ayland@ilande.co.uk>
When about to execute a SCSI command, ensure that cmdfifo is not empty and
current_dev is non-NULL. This can happen if the guest tries to execute a TI
(Transfer Information) command without issuing one of the select commands
first.
Buglink: https://bugs.launchpad.net/qemu/+bug/1910723
Buglink: https://bugs.launchpad.net/qemu/+bug/1909247
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-7-mark.cave-ayland@ilande.co.uk>
The const pointer returned by fifo8_pop_buf() lies directly within the array used
to model the FIFO. Building with address sanitizers enabled shows that if the
caller expects a minimum number of bytes present then if the FIFO is nearly full,
the caller may unexpectedly access past the end of the array.
Introduce esp_fifo_pop_buf() which takes a destination buffer and performs a
memcpy() in it to guarantee that the caller cannot overwrite the FIFO array and
update all callers to use it. Similarly add underflow protection similar to
esp_fifo_push() and esp_fifo_pop() so that instead of triggering an assert()
the operation becomes a no-op.
Buglink: https://bugs.launchpad.net/qemu/+bug/1909247
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210407195801.685-6-mark.cave-ayland@ilande.co.uk>
Each FIFO currently has its own pop functions with the only difference being
the capacity check. The original reason for this was that the fifo8
implementation doesn't have a formal API for retrieving the FIFO capacity,
however there are multiple examples within QEMU where the capacity field is
accessed directly.
Change esp_fifo_pop() to access the FIFO capacity directly and then consolidate
esp_cmdfifo_pop() into esp_fifo_pop().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-5-mark.cave-ayland@ilande.co.uk>
Each FIFO currently has its own push functions with the only difference being
the capacity check. The original reason for this was that the fifo8
implementation doesn't have a formal API for retrieving the FIFO capacity,
however there are multiple examples within QEMU where the capacity field is
accessed directly.
Change esp_fifo_push() to access the FIFO capacity directly and then consolidate
esp_cmdfifo_push() into esp_fifo_push().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-4-mark.cave-ayland@ilande.co.uk>
The code for write_response() has always used the FIFO to store the data for
the status/message in phases, even for DMA transactions. Switch to using a
separate buffer that can be used directly for DMA transactions and restrict
the FIFO use to the non-DMA case.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210407195801.685-3-mark.cave-ayland@ilande.co.uk>
After issuing a SCSI command the SCSI layer can call the SCSIBusInfo .cancel
callback which resets both current_req and current_dev to NULL. If any data
is left in the transfer buffer (async_len != 0) then the next TI (Transfer
Information) command will attempt to reference the NULL pointer causing a
segfault.
Buglink: https://bugs.launchpad.net/qemu/+bug/1910723
Buglink: https://bugs.launchpad.net/qemu/+bug/1909247
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-2-mark.cave-ayland@ilande.co.uk>
If QEMU is launched with the -S option then the ESPState mig_version_id property
is left unset due to the ordering of the VMState fields in the VMStateDescription
for sysbusespscsi and pciespscsi. If the VM is migrated and restored in this
stopped state, the version tests in the vmstate_esp VMStateDescription and
esp_post_load() become confused causing the migration to fail.
Fix the ordering problem by moving the setting of mig_version_id to a common
esp_pre_save() function which is invoked first by both sysbusespscsi and
pciespscsi rather than at the point where ESPState is itself serialised into the
migration stream.
Buglink: https://bugs.launchpad.net/qemu/+bug/1922611
Fixes: 0bd005be78 ("esp: add vmstate_esp version to embedded ESPState")
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210407124842.32695-1-mark.cave-ayland@ilande.co.uk>
Each board in mps2-tz.c specifies a RAMInfo[] array providing
information about each RAM in the board. The .mpc field of the
RAMInfo struct specifies which MPC, if any, the RAM is attached to.
We already assert if the array doesn't have any entry for an MPC, but
we don't diagnose the error of using the same MPC number twice (which
is quite easy to do by accident if copy-and-pasting structure
entries).
Enhance find_raminfo_for_mpc() so that it detects multiple entries
for the MPC as well as missing entries.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210409150527.15053-3-peter.maydell@linaro.org
The AN524 has three MPCs: one for the BRAM, one for the QSPI flash,
and one for the DDR. We incorrectly set the .mpc field in the
RAMInfo struct for the SRAM block to 1, giving it the same MPC we are
using for the QSPI. The effect of this was that the QSPI didn't get
mapped into the system address space at all, via an MPC or otherwise,
and guest programs which tried to read from the QSPI would get a bus
error. Correct the SRAM RAMInfo to indicate that it does not have an
associated MPC.
Fixes: 25ff112a8c ("hw/arm/mps2-tz: Add new mps3-an524 board")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210409150527.15053-2-peter.maydell@linaro.org
Unfortuately, the elements of PAGE_* were not in numerical
order and so PAGE_ANON was added to an "unused" bit.
As an arbitrary choice, move PAGE_TARGET_{1,2} together.
Cc: Laurent Vivier <laurent@vivier.eu>
Fixes: 26bab757d4 ("linux-user: Introduce PAGE_ANON")
Buglink: https://bugs.launchpad.net/bugs/1922617
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can remove PAGE_WRITE when (internally) marking a page
read-only because it contains translated code.
This can be triggered by tests/tcg/aarch64/bti-2, after
having serviced SIGILL trampolines on the stack.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using mprotect() to change PROT_* does not change the MAP_ANON
previously set with mmap(). Our linux-user version of MTE only
works with MAP_ANON pages, so losing PAGE_ANON caused MTE to
stop working.
Reported-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In emulation of the CFGI_STE_RANGE command, we now take StreamID as the
start of the invalidation range, regardless of whatever the Range is,
whilst the spec clearly states that
- "Invalidation is performed for an *aligned* range of 2^(Range+1)
StreamIDs."
- "The bottom Range+1 bits of the StreamID parameter are IGNORED,
aligning the range to its size."
Take CFGI_ALL (where Range == 31) as an example, if there are some random
bits in the StreamID field, we'll fail to perform the full invalidation but
get a strange range (e.g., SMMUSIDRange={.start=1, .end=0}) instead. Rework
the emulation a bit to get rid of the discrepancy with the spec.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20210402100449.528-1-yuzenghui@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GSIV values in SMMUv3 IORT node are not correct as they don't match
the SMMUIrq enumeration, which describes the IRQ<->PIN mapping used by
our emulated vSMMU.
Fixes: a703b4f6c1 ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20210402084731.93-1-yuzenghui@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For most commands, when issuing an AIO, the BlockAIOCB is stored in the
NvmeRequest aiocb pointer when the AIO is issued. The main use of this
is cancelling AIOs when deleting submission queues (it is currently not
used for Abort).
However, some commands like Dataset Management Zone Management Send
(zone reset) may involve more than one AIO and here the AIOs are issued
without saving a reference to the BlockAIOCB. This is a problem since
nvme_del_sq() will attempt to cancel outstanding AIOs, potentially with
an invalid BlockAIOCB since the aiocb pointer is not NULL'ed when the
request structure is recycled.
Fix this by
1. making sure the aiocb pointer is NULL'ed when requests are recycled
2. only attempt to cancel the AIO if the aiocb is non-NULL
3. if any AIOs could not be cancelled, drain all aio as a last resort.
Fixes: dc04d25e2f ("hw/block/nvme: add support for the format nvm command")
Fixes: c94973288c ("hw/block/nvme: add broadcast nsid support flush command")
Fixes: e4e430b3d6 ("hw/block/nvme: add simple copy command")
Fixes: 5f5dc4c6a9 ("hw/block/nvme: zero out zones on reset")
Fixes: 2605257a26 ("hw/block/nvme: add the dataset management command")
Cc: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Cc: Minwoo Im <minwoo.im@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
nvme_compare() fails to store the aiocb from the blk_aio_preadv() call.
Fix this.
Fixes: 0a384f923f ("hw/block/nvme: add compare command")
Cc: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
nvme_map_prp needs to calculate the number of list entries based on the
offset value. For the subsequent PRP2 list, need to ensure the number of
entries is within the MAX number of PRP entries for a page.
Signed-off-by: Padmakar Kalghatgi <p.kalghatgi@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Remove the docs/specs/nvme.txt and replace it with proper documentation
in docs/system/nvme.rst.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Commit 47c8c915b1 fixed a problem where multiple spapr_drc_detach()
requests were breaking QEMU. The solution was to just spapr_drc_detach()
once, and use spapr_drc_unplug_requested() to filter whether we already
detached it or not. The commit also tied the hotplug request to the
guest in the same condition.
Turns out that there is a reliable way for a CPU hotunplug to fail. If a
guest with one CPU hotplugs a CPU1, then offline CPU0s via 'echo 0 >
/sys/devices/system/cpu/cpu0/online', then attempts to hotunplug CPU1,
the kernel will refuse it because it's the last online CPU of the
system. Given that we're pulsing the IRQ only in the first try, in a
failed attempt, all other CPU1 hotunplug attempts will fail, regardless
of the online state of CPU1 in the kernel, because we're simply not
letting the guest know that we want to hotunplug the device.
Let's move spapr_hotplug_req_remove_by_index() back out of the "if
(!spapr_drc_unplug_requested(drc))" conditional, allowing for multiple
'device_del' requests to the same CPU core to reach the guest, in case
the CPU core didn't fully hotunplugged previously.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210401000437.131140-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pseries machines introduced the concept of 'unplug timeout' for CPU
hotunplugs. The idea was to circunvent a deficiency in the pSeries
specification (PAPR), that currently does not define a proper way for
the hotunplug to fail. If the guest refuses to release the CPU (see [1]
for an example) there is no way for QEMU to detect the failure.
Further discussions about how to send a QAPI event to inform about the
hotunplug timeout [2] exposed problems that weren't predicted back when
the idea was developed. Other QEMU machines don't have any type of
hotunplug timeout mechanism for any device, e.g. ACPI based machines
have a way to make hotunplug errors visible to the hypervisor. This
would make this timeout mechanism exclusive to pSeries, which is not
ideal.
The real problem is that a QAPI event that reports hotunplug timeouts
puts the management layer (namely Libvirt) in a weird spot. We're not
telling that the hotunplug failed, because we can't be 100% sure of
that, and yet we're resetting the unplug state back, preventing any
DEVICE_DEL events to reach out in case the guest decides to release the
device. Libvirt would need to inspect the guest itself to see if the
device was released or not, otherwise the internal domain states will be
inconsistent. Moreover, Libvirt already has an 'unplug timeout'
concept, and a QEMU side timeout would need to be juggled together with
the existing Libvirt timeout.
All this considered, this solution ended up creating more trouble than
it solved. This patch reverts the 3 commits that introduced the timeout
mechanism for CPU hotplugs in pSeries machines.
This reverts commit 4515a5f786
"qemu_timer.c: add timer_deadline_ms() helper"
This reverts commit d1c2e3ce3d
"spapr_drc.c: add hotunplug timeout for CPUs"
This reverts commit 51254ffb32
"spapr_drc.c: introduce unplug_timeout_timer"
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1911414
[2] https://lists.gnu.org/archive/html/qemu-devel/2021-03/msg04682.html
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210401000437.131140-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Calling qdev_get_machine() from a QOM instance_init function is
fragile because we can't be sure the machine object actually
exists. And this happens to break when passing ",help" on the
command line to get the list of properties for a CPU core
device types :
$ ./qemu-system-ppc64 -device power8_v2.0-spapr-cpu-core,help
qemu-system-ppc64: ../../hw/core/machine.c:1290:
qdev_get_machine: Assertion `machine != NULL' failed.
Aborted (core dumped)
This used to work before QEMU 5.0, but commit 3df261b667
unwillingly introduced a subtle regression : the above command
line needs to create an instance but the instance_init function
of the base class calls qdev_get_machine() before
qemu_create_machine() has been called, which is a programming bug.
Use current_machine instead. It is okay to skip the setting of
nr_thread in this case since only its type is displayed.
Fixes: 3df261b667 ("softmmu/vl.c: Handle '-cpu help' and '-device help' before 'no default machine'")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Cc: peter.maydell@linaro.org
Message-Id: <20210409160339.500167-3-groug@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Found the following cpu feature bits missing from EPYC-Rome model.
ibrs : Indirect Branch Restricted Speculation
ssbd : Speculative Store Bypass Disable
These new features will be added in EPYC-Rome-v2. The -cpu help output
after the change.
x86 EPYC-Rome (alias configured by machine type)
x86 EPYC-Rome-v1 AMD EPYC-Rome Processor
x86 EPYC-Rome-v2 AMD EPYC-Rome Processor
Reported-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <161478622280.16275.6399866734509127420.stgit@bmoger-ubuntu>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
