Commit Graph

63542 Commits

Author SHA1 Message Date
Alexey Kardashevskiy
c26bc185b7 vfio/spapr: Allow backing bigger guest IOMMU pages with smaller physical pages
At the moment the PPC64/pseries guest only supports 4K/64K/16M IOMMU
pages and POWER8 CPU supports the exact same set of page size so
so far things worked fine.

However POWER9 supports different set of sizes - 4K/64K/2M/1G and
the last two - 2M and 1G - are not even allowed in the paravirt interface
(RTAS DDW) so we always end up using 64K IOMMU pages, although we could
back guest's 16MB IOMMU pages with 2MB pages on the host.

This stores the supported host IOMMU page sizes in VFIOContainer and uses
this later when creating a new DMA window. This uses the system page size
(64k normally, 2M/16M/1G if hugepages used) as the upper limit of
the IOMMU pagesize.

This changes the type of @pagesize to uint64_t as this is what
memory_region_iommu_get_min_page_size() returns and clz64() takes.

There should be no behavioral changes on platforms other than pseries.
The guest will keep using the IOMMU page size selected by the PHB pagesize
property as this only changes the underlying hardware TCE table
granularity.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Yasmin Beatriz
56e0e961ec target/ppc: bcdsub fix sign when result is zero
When the result of bcdsub is equal to zero, the result sign may be
set to negative in some cases, and this does not follow the Power ISA
specifications as to decimal integer arithmetic instructions.

Signed-off-by: Yasmin Beatriz <yasmins@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Richard Henderson
86c0cab11a target/ppc: Use non-arithmetic conversions for fp load/store
Memory operations have no side effects on fp state.
The use of a "real" conversions between float64 and float32
would raise exceptions for SNaN and out-of-range inputs.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Richard Henderson
3843471755 target/ppc: Honor fpscr_ze semantics and tidy fre, fresqrt
Divide by zero, exception taken, leaves the destination register
unmodified.  Therefore we must raise the exception before returning
from the respective helpers.

>From helper_fre, divide by zero exception not taken, return the
documented +/- 0.5.

At the same time, tidy the invalid exception checking so that we
rely on softfloat for initial argument validation, and select the
kind of invalid operand exception only when we know we must.

At the same time, pass and return float64 values directly rather
than bounce through the CPU_DoubleU union.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Richard Henderson
49ab52ef69 target/ppc: Tidy helper_fsqrt
Tidy the invalid exception checking so that we rely on softfloat for
initial argument validation, and select the kind of invalid operand
exception only when we know we must.  Pass and return float64 values
directly rather than bounce through the CPU_DoubleU union.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Richard Henderson
ac43cec37e target/ppc: Tidy helper_fadd, helper_fsub
Tidy the invalid exception checking so that we rely on softfloat for
initial argument validation, and select the kind of invalid operand
exception only when we know we must.  Pass and return float64 values
directly rather than bounce through the CPU_DoubleU union.

Note that because we know float_flag_invalid was set, we do not have
to re-check the signs of the infinities.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Richard Henderson
79f916331d target/ppc: Tidy helper_fmul
Tidy the invalid exception checking so that we rely on softfloat for
initial argument validation, and select the kind of invalid operand
exception only when we know we must.  Pass and return float64 values
directly rather than bounce through the CPU_DoubleU union.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Richard Henderson
ae13018d79 target/ppc: Honor fpscr_ze semantics and tidy fdiv
Divide by zero, exception taken, leaves the destination register
unmodified.  Therefore we must raise the exception before returning
from helper_fdiv.  Move the check from do_float_check_status into
helper_fdiv.

At the same time, tidy the invalid exception checking so that we
rely on softfloat for initial argument validation, and select the
kind of invalid operand exception only when we know we must.

At the same time, pass and return float64 values directly rather
than bounce through the CPU_DoubleU union.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Richard Henderson
e82c42b7c5 target/ppc: Enable fp exceptions for user-only
While just setting the MSR bits is sufficient, we can tidy
the helper code by extracting the MSR test to a helper and
then forcing it true for user-only.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Alexey Kardashevskiy
1368898d4b pseries: Update SLOF firmware image
This includes gcc8.1 fixes and the image is compiled using gcc 8.1 as well.

The full list of changes is:
  > Fix bad assembler statements for compiling with gcc 8.1 / as 2.30
  > libelf: Add REL32 to the list of ignored relocations

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Bharata B Rao
cc71c7760e spapr_cpu_core: vmstate_[un]register per-CPU data from (un)realizefn
VMStateDescription vmstate_spapr_cpu_state was added by commit
b94020268e (spapr_cpu_core: migrate per-CPU data) to migrate per-CPU
data with the required vmstate registration and unregistration calls.
However the unregistration is being done only from vcpu creation error path
and not from CPU delete path.

This causes migration to fail with the following error if migration is
attempted after a CPU unplug like this:
Unknown savevm section or instance 'spapr_cpu' 16
Additionally this leaves the source VM unresponsive after migration failure.

Fix this by ensuring the vmstate_unregister happens during CPU removal.
Fixing this becomes easier when vmstate (un)registration calls are moved to
vcpu (un)realize functions which is what this patch does.

Fixes: https://bugs.launchpad.net/qemu/+bug/1785972
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 11:09:34 +10:00
Laurent Vivier
70c61d4f78 linux-user: add QEMU_IFLA_INFO_KIND nested type for tun
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180820171557.7734-5-laurent@vivier.eu>
2018-08-20 22:07:40 +02:00
Laurent Vivier
90cce2a106 linux-user: update netlink route types
Add RTA_PREF and RTA_CACHEINFO.

Fix following errors when we start gedit:

  Unknown host RTA type: 12
  Unknown host RTA type: 20

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180820171557.7734-4-laurent@vivier.eu>
2018-08-20 22:07:19 +02:00
Laurent Vivier
3c3ab559c1 linux-user: introduce QEMU_RTA_* to use with rtattr_type_t
Following commit will introduce RTA_PREF that appears only with
kernel v4.1. To avoid to manage a specific case for it, this patch
introduces the full list of rtattr_type_t prefixed with QEMU_ (as we
did for IFLA values)

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180820171557.7734-3-laurent@vivier.eu>
[lv: added more RTA_* from linux v4.18]
2018-08-20 22:05:42 +02:00
Laurent Vivier
2a03d3e6ae linux-user: fix recvmsg()/recvfrom() with netlink and MSG_TRUNC
If recvmsg()/recvfrom() are used with the MSG_TRUNC flag, they return the
real length even if it was longer than the passed buffer.
So when we translate the buffer we must check we don't go beyond the
end of the buffer.

Bug: https://github.com/vivier/qemu-m68k/issues/33
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180820171557.7734-2-laurent@vivier.eu>
2018-08-20 22:03:49 +02:00
Mark Cave-Ayland
8498321421 sun4m: don't use legacy fw_cfg_init_mem() function
Instead initialise the device via qdev to allow us to set device properties
directly as required.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-08-20 19:18:31 +01:00
Mark Cave-Ayland
3ac24188ec sun4u: ensure kernel_top is always initialised
Valgrind reports that when loading a non-ELF kernel, kernel_top may be used
uninitialised when checking for an initrd.

Since there are no known non-ELF kernels for SPARC64 then we can simply
initialise kernel_top to 0 and then skip the initrd load process if it hasn't
been set by load_elf().

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-08-20 19:18:31 +01:00
Peter Maydell
d0092d90eb First round of s390x patches for 3.1:
- add compat machine for 3.1
 - remove deprecated 's390-squash-mcss' option
 - cpu models: add "max" cpu model, enhance feature group code
 - kvm: add support for etoken facility and huge page backing
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEw9DWbcNiT/aowBjO3s9rk8bwL68FAlt6uGoSHGNvaHVja0By
 ZWRoYXQuY29tAAoJEN7Pa5PG8C+vFPkP/jD95oIG63Zqgr8QKOxucl2jjTr1lPlt
 F6VXJlAz/GEX8oaViFi8k7+/8c6hrLuGorEhZ/OqQdlqNa1wqA5zDw3bKzfyiXIV
 75rHkbDB4eLPfaj6oziwOf7Eb1k25552Xd/LnU09zj7TlLF+U3ud4LeKwF7KapOt
 1e2/WkyXXSZ8Qdwi54mx4wZGjGNqABjBW/IURhfXUNt6II1dSnDat9bpd30Mquri
 fFobgmOfaJBrS5Yzw4lGvcWwE50FmJndc0T1HKd4ccaOteg+8e2Fls8RotFibbWy
 Yz6FrtVD5Rqmk7nHnkiCgVGvFNADSmY0Yf2XcaGV0DA/LU3FYvbEKEtZgOzOEjFW
 dBhx0s8h0MqPB+Jvyl9jSwOgfdSM+kGT45kNHegVTjAr+rl0/oUOdnwrxc2X2ykn
 ajCd/obXEzZzrp73dS+tsqA+gasN8dNEZy1NNa0CI5zvXlocPrL/ts2S3C1CWuE5
 qa8MT37UNBdc6nydlOiJ4pt5Zf/OgECORogMsaB/y4N1387/RA1rhHciaqJs93Pq
 lLHMttAs4Gr1ACyQqcJ3t5bj+Pa1C30m4QZkevjhJpJXoMMOAGuUCYSNmD3UhvLf
 ViUy+2ep3EE3aU33NmuK7sM4lC2v6xKzxr5p2piuIf4sTginuvvGL9r4FeOVQ5jf
 JX50fXST7vlf
 =71Z2
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180820' into staging

First round of s390x patches for 3.1:
- add compat machine for 3.1
- remove deprecated 's390-squash-mcss' option
- cpu models: add "max" cpu model, enhance feature group code
- kvm: add support for etoken facility and huge page backing

# gpg: Signature made Mon 20 Aug 2018 13:47:38 BST
# gpg:                using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>"
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20180820:
  s390x: Enable KVM huge page backing support
  s390x/kvm: add etoken facility
  linux-headers: update
  s390x/cpumodel: Add "-cpu max" support
  s390x: remove 's390-squash-mcss' option
  s390x/cpumodel: enum type S390FeatGroup now gets generated
  s390x: introduce 3.1 compat machine

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-20 17:41:18 +01:00
Peter Maydell
44b69d5037 tests/vm: Clean out old working directories on build
When we do a build inside one of the BSD VMs, first
delete any stale old build directories from the VM's
/var/tmp. This prevents the VM from running out of
disk space after it has been used for a dozen or
so builds.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180820124811.7982-1-peter.maydell@linaro.org
2018-08-20 17:07:53 +01:00
Peter Maydell
c8090972fa RDMA queue
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbeDTaAAoJEDbUwPDPL+RtYVIH/1aSWn27pmeoShyqUeoH1uPu
 VoJYzSzR5+lVpprF6qK9Z1BjDFohtEnxm4e0iQ0Zd1L9hSld6n6tI/DNueVrJojc
 KCCCCPyjIrzbAFJLuZHvqqOs8ZJYqKoGytlF/D0YSQiHSEovfADxfQVIttCVBQoM
 rZhYuE8ndEw/9sLXApD4T3VntWO6jdm8clLuCSOsfkPelLOB64RYXQC+mihipqgW
 F18ExBsgXm+/jsh+HBVXtRncW2stOi+Difb5MkbQA9OBMLXWruwUC/pzdZhXX8rs
 KTsj6FO5RUVXum5fhlex5qP7m/RxGwCwAYXH7VgTubti2BFfdDCpFQteSDgSCFo=
 =artu
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/marcel/tags/rdma-pull-request' into staging

RDMA queue

# gpg: Signature made Sat 18 Aug 2018 16:01:46 BST
# gpg:                using RSA key 36D4C0F0CF2FE46D
# gpg: Good signature from "Marcel Apfelbaum <marcel.apfelbaum@zoho.com>"
# gpg:                 aka "Marcel Apfelbaum <marcel@redhat.com>"
# gpg:                 aka "Marcel Apfelbaum <marcel.apfelbaum@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B1C6 3A57 F92E 08F2 640F  31F5 36D4 C0F0 CF2F E46D

* remotes/marcel/tags/rdma-pull-request:
  config: split PVRDMA from RDMA
  hw/pvrdma: remove not needed include
  hw/rdma: Add reference to pci_dev in backend_dev
  hw/rdma: Bugfix - Support non-aligned buffers
  hw/rdma: Print backend QP number in hex format
  hw/rdma: Cosmetic change - move to generic function
  hw/pvrdma: Cosmetic change - indent right
  hw/rdma: Reorder resource cleanup
  hw/rdma: Do not allocate memory for non-dma MR
  hw/rdma: Delete useless structure RdmaRmUserMR
  hw/pvrdma: Make default pkey 0xFFFF
  hw/pvrdma: Clean CQE before use
  hw/rdma: Modify debug macros
  hw/pvrdma: Bugfix - provide the correct attr_mask to query_qp
  hw/rdma: Make distinction between device init and start modes

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-20 15:44:41 +01:00
Peter Maydell
62c34848ef target-arm queue:
* Fix crash on conditional instruction in an IT block
  * docs/generic-loader: mention U-Boot and Intel HEX executable formats
  * hw/intc/arm_gicv3_its: downgrade error_report to warn_report in kvm_arm_its_reset
  * imx_serial: Generate interrupt on receive data ready if enabled
  * Fix various minor bugs in AArch32 Hyp related coprocessor registers
  * Permit accesses to ELR_Hyp from Hyp mode via MSR/MRS (banked)
  * Implement AArch32 ERET instruction
  * hw/arm/virt: Add virt-3.1 machine type
  * sdhci: add i.MX SD Stable Clock bit
  * Remove now-obsolete MMIO request_ptr APIs
  * hw/timer/m48t59: Move away from old_mmio accessors
  * hw/watchdog/cmsdk_apb_watchdog: Implement CMSDK APB watchdog module
  * nvic: Expose NMI line
  * hw/dma/pl080: cleanups and new features required for use in MPS boards
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJbepg0AAoJEDwlJe0UNgzeV6wP/Rla7p/lEZxndkNN68+bgXFY
 PF7E+YVZjYok791PJC6sSGq/RfrbBjwhXLvnHdlbIxYbgjjc3TMHX57aey8fQ7b4
 Ardo8eyIIbEIH6cvvl9n140Uuab2rFtZ62YSoLqWaFk2xEqcl7p54l+7AlRtw3j3
 QJJxXrpnP5waGHbdQDjXf7XMUiJ7MDIszb2xirnteAy+MK+4zPBDdex3oO4seX4D
 DKvL42gpkj0sRuXKKF+GTxBE5AyTlS5/zdbTy4Iu8F1hOQsNYvzRyJqrvS6o1rCk
 IHTEOLBu9PRYrJwagDKs+AKArqcRoKHrgvzh+OMEJBD15bvRJLHNAV63poOmImHd
 kCU6ZIixJjMMfa74Uc0CuR7Bzlawtl4pIPCYETQ59JvUlxBJhhq6MxuJHj1stbV3
 btapojLgfrVULriqYOPgSVP6iNkKNxT/dZxYyqQNKFmGi3EjERUVFqT9RxSptX+L
 hJs5lNzieJVlGfwcVf6MDyxDEw6nW+EqTYSV2zugmnfCxHeYGAoPJ8/0eG45kl+W
 4Iz9KmJ35UXfUUgulpFMhNqZEK6H0MLf7LKSlbjZHWl3JlOohOZYjlYOgvB++94M
 hF04nTK3QHhVuIb7u2aVpSl08zZzCBUBduJO0mq4+atEEL1agF+F1DBBJPickmm6
 zwUP05vgdzvAVaoyy6q5
 =iGgV
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180820' into staging

target-arm queue:
 * Fix crash on conditional instruction in an IT block
 * docs/generic-loader: mention U-Boot and Intel HEX executable formats
 * hw/intc/arm_gicv3_its: downgrade error_report to warn_report in kvm_arm_its_reset
 * imx_serial: Generate interrupt on receive data ready if enabled
 * Fix various minor bugs in AArch32 Hyp related coprocessor registers
 * Permit accesses to ELR_Hyp from Hyp mode via MSR/MRS (banked)
 * Implement AArch32 ERET instruction
 * hw/arm/virt: Add virt-3.1 machine type
 * sdhci: add i.MX SD Stable Clock bit
 * Remove now-obsolete MMIO request_ptr APIs
 * hw/timer/m48t59: Move away from old_mmio accessors
 * hw/watchdog/cmsdk_apb_watchdog: Implement CMSDK APB watchdog module
 * nvic: Expose NMI line
 * hw/dma/pl080: cleanups and new features required for use in MPS boards

# gpg: Signature made Mon 20 Aug 2018 11:30:12 BST
# gpg:                using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180820: (25 commits)
  hw/dma/pl080: Remove hw_error() if DMA is enabled
  hw/dma/pl080: Correct bug in register address decode logic
  hw/dma/pl080: Provide device reset function
  hw/dma/pl080: Don't use CPU address space for DMA accesses
  hw/dma/pl080: Support all three interrupt lines
  hw/dma/pl080: Allow use as embedded-struct device
  nvic: Expose NMI line
  hw/watchdog/cmsdk_apb_watchdog: Implement CMSDK APB watchdog module
  hw/timer/m48t59: Move away from old_mmio accessors
  hw/misc: Remove mmio_interface device
  memory: Remove MMIO request_ptr APIs
  hw/ssi/xilinx_spips: Remove unneeded MMIO request_ptr code
  sdhci: add i.MX SD Stable Clock bit
  hw/arm/virt: Add virt-3.1 machine type
  target/arm: Implement AArch32 ERET instruction
  target/arm: Permit accesses to ELR_Hyp from Hyp mode via MSR/MRS (banked)
  target/arm: Implement ESR_EL2/HSR for AArch32 and no-EL2
  target/arm: Implement AArch32 Hyp FARs
  target/arm: Implement AArch32 HVBAR
  target/arm: Add missing .cp = 15 to HMAIR1 and HAMAIR1 regdefs
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-20 13:22:21 +01:00
Janosch Frank
09c6c75480 s390x: Enable KVM huge page backing support
QEMU has had huge page support for a longer time already, but KVM
memory management under s390x needed some changes to work with huge
backings.

Now that we have support, let's enable it if requested and
available. Otherwise we now properly tell the user if there is no
support and back out instead of failing to run the VM later on.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180802070201.257406-1-frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-08-20 14:18:49 +02:00
Christian Borntraeger
27e84d4ebd s390x/kvm: add etoken facility
Provide the etoken facility. We need to handle cpu model, migration and
clear reset.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20180731090448.36662-3-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-08-20 14:18:49 +02:00
Cornelia Huck
d36f7de829 linux-headers: update
Update to Linux upstream commit 2ad0d5269970
("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net")

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-08-20 14:18:49 +02:00
David Hildenbrand
c61177881c s390x/cpumodel: Add "-cpu max" support
The "max" CPU model behaves like "-cpu host" when KVM is enabled, and like
a CPU with the maximum possible feature set when TCG is enabled.

While the "host" model can not be used under TCG ("kvm_required"), the
"max" model can and "Enables all features supported by the accelerator in
the current host".

So we can treat "host" just as a special case of "max" (like x86 does).
It differs to the "qemu" CPU model under TCG such that compatibility
handling will not be performed and that some experimental CPU features
not yet part of the "qemu" model might be indicated.

These are right now under TCG (see "qemu_MAX"):
- stfle53
- msa5-base
- zpci

This will result right now in the following warning when starting QEMU TCG
with the "max" model:
    "qemu-system-s390x: warning: 'msa5-base' requires 'kimd-sha-512'."

The "qemu" model (used as default in QEMU under TCG) will continue to
work without such warnings. The "max" model in the current form
might be interesting for kvm-unit-tests (where we would e.g. now also
test "msa5-base").

The "max" model is neither static nor migration safe (like the "host"
model). It is independent of the machine but dependends on the accelerator.
It can be used to detect the maximum CPU model also under TCG from upper
layers without having to care about CPU model names for CPU model
expansion.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180725091233.3300-1-david@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[CH: minor wording changes]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-08-20 14:18:49 +02:00
Cornelia Huck
36699ab480 s390x: remove 's390-squash-mcss' option
This option has been deprecated for two releases; remove it.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-08-20 14:18:49 +02:00
Michael Mueller
a5f9ecc49d s390x/cpumodel: enum type S390FeatGroup now gets generated
The enumeration type S390FeatGroup is now generated as well.
This shall simplify the definition of new feature groups
without the requirement to modify existing code.

Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Message-Id: <20180725143617.8731-1-mimu@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-08-20 14:18:49 +02:00
Cornelia Huck
9ca056d68f s390x: introduce 3.1 compat machine
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-08-20 14:18:49 +02:00
Peter Maydell
b85fad1588 hw/dma/pl080: Remove hw_error() if DMA is enabled
The PL08x model currently will unconditionally call hw_error()
if the DMA engine is enabled by the guest. This has been
present since the PL080 model was edded in 2006, and is
presumably either unintentional debug code left enabled,
or a guard against untested DMA engine code being used.

Remove the hw_error(), since we now have a guest which
will actually try to use the DMA engine (the self-test
binary for the AN505 MPS2 FPGA image).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-08-20 11:24:33 +01:00
Peter Maydell
156448ab64 hw/dma/pl080: Correct bug in register address decode logic
A bug in the handling of the register address decode logic
for the PL08x meant that we were incorrectly treating
accesses to the DMA channel registers (DMACCxSrcAddr,
DMACCxDestaddr, DMACCxLLI, DMACCxControl, DMACCxConfiguration)
as bad offsets. Fix this long-standing bug.

Fixes: https://bugs.launchpad.net/qemu/+bug/1637974
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-08-20 11:24:33 +01:00
Peter Maydell
c193304d4f hw/dma/pl080: Provide device reset function
The PL080/PL081 model is missing a reset function; implement it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-08-20 11:24:33 +01:00
Peter Maydell
112a829f8f hw/dma/pl080: Don't use CPU address space for DMA accesses
Currently our PL080/PL081 model uses a combination of the CPU's
address space (via cpu_physical_memory_{read,write}()) and the
system address space for performing DMA accesses.

For the PL081s in the MPS FPGA images, their DMA accesses
must go via Master Security Controllers. Switch the
PL080/PL081 model to take a MemoryRegion property which
defines its downstream for making DMA accesses.

Since the PL08x are only used in two board models, we
make provision of the 'downstream' link mandatory and convert
both users at once, rather than having it be optional with
a default to the system address space.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-08-20 11:24:33 +01:00
Peter Maydell
6d0ed6ba6c hw/dma/pl080: Support all three interrupt lines
The PL080 and PL081 have three outgoing interrupt lines:
 * DMACINTERR signals DMA errors
 * DMACINTTC is the DMA count interrupt
 * DMACINTR is a combined interrupt, the logical OR of the other two

We currently only implement DMACINTR, because that's all the
realview and versatile boards needed, but the instances of the
PL081 in the MPS2 firmware images use all three interrupt lines.
Implement the missing DMACINTERR and DMACINTTC.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-08-20 11:24:33 +01:00
Peter Maydell
aa74e355f1 hw/dma/pl080: Allow use as embedded-struct device
Create a new include file for the pl081's device struct,
type macros, etc, so that it can be instantiated using
the "embedded struct" coding style.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-08-20 11:24:33 +01:00
Peter Maydell
514b4f361b nvic: Expose NMI line
On real v7M hardware, the NMI line is an externally visible signal
that an SoC or board can toggle to assert an NMI. Expose it in
our QEMU NVIC and armv7m container objects so that a board model
can wire it up if it needs to.

In particular, the MPS2 watchdog is wired to NMI.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-08-20 11:24:33 +01:00
Peter Maydell
050c2ea07b hw/watchdog/cmsdk_apb_watchdog: Implement CMSDK APB watchdog module
The Arm Cortex-M System Design Kit includes a simple watchdog module
based on a 32-bit down-counter. Implement this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-20 11:24:33 +01:00
Peter Maydell
62b9cf0a77 hw/timer/m48t59: Move away from old_mmio accessors
Move the m48t59 device away from using old_mmio MemoryRegionOps
accessors.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20180802180602.22047-1-peter.maydell@linaro.org
2018-08-20 11:24:33 +01:00
Peter Maydell
3eff40dbf4 hw/misc: Remove mmio_interface device
The mmio_interface device was a purely internal artifact
of the implementation of the memory subsystem's request_ptr
APIs. Now that we have removed those APIs, we can remove
the mmio_interface device too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-id: 20180817114619.22354-4-peter.maydell@linaro.org
2018-08-20 11:24:32 +01:00
Peter Maydell
8c1c245378 memory: Remove MMIO request_ptr APIs
Remove the obsolete MMIO request_ptr APIs; they have no
users now.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-id: 20180817114619.22354-3-peter.maydell@linaro.org
2018-08-20 11:24:32 +01:00
Peter Maydell
5321fa68fd hw/ssi/xilinx_spips: Remove unneeded MMIO request_ptr code
We now support direct execution from MMIO regions in the
core memory subsystem. This means that we don't need to
have device-specific support for it, and we can remove
the request_ptr handling from the Xilinx SPIPS device.
(It was broken anyway due to race conditions, and disabled
by default.)

This device is the only in-tree user of this API.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-id: 20180817114619.22354-2-peter.maydell@linaro.org
2018-08-20 11:24:32 +01:00
Hans-Erik Floryd
6bfd06da6e sdhci: add i.MX SD Stable Clock bit
Add the ESDHC PRSSTAT_SDSTB bit, using the value of SDHC_CLOCK_INT_STABLE.
Freescale recommends checking this bit when changing clock frequency.

Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Message-id: 1534507843-4251-1-git-send-email-hans-erik.floryd@rt-labs.com
[PMM: fixed indentation]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-20 11:24:32 +01:00
Andrew Jones
22907d2b81 hw/arm/virt: Add virt-3.1 machine type
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-20 11:24:32 +01:00
Peter Maydell
55c544ed27 target/arm: Implement AArch32 ERET instruction
ARMv7VE introduced the ERET instruction, which is necessary to
return from an exception taken to Hyp mode. Implement this.
In A32 encoding it is a completely new encoding; in T32 it
is an adjustment of the behaviour of the existing
"SUBS PC, LR, #<imm8>" instruction.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-10-peter.maydell@linaro.org
2018-08-20 11:24:32 +01:00
Peter Maydell
aec4dd09f1 target/arm: Permit accesses to ELR_Hyp from Hyp mode via MSR/MRS (banked)
The MSR (banked) and MRS (banked) instructions allow accesses to ELR_Hyp
from either Monitor or Hyp mode. Our translate time check
was overly strict and only permitted access from Monitor mode.

The runtime check we do in msr_mrs_banked_exc_checks() had the
correct code in it, but never got there because of the earlier
"currmode == tgtmode" check. Special case ELR_Hyp.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-9-peter.maydell@linaro.org
2018-08-20 11:24:32 +01:00
Peter Maydell
68e78e332c target/arm: Implement ESR_EL2/HSR for AArch32 and no-EL2
The AArch32 HSR is the equivalent of AArch64 ESR_EL2;
we can implement it by marking our existing ESR_EL2 regdef
as STATE_BOTH. It also needs to be "RES0 from EL3 if
EL2 not implemented", so add the missing stanza to
el3_no_el2_cp_reginfo.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-8-peter.maydell@linaro.org
2018-08-20 11:24:32 +01:00
Peter Maydell
cba517c31e target/arm: Implement AArch32 Hyp FARs
The AArch32 virtualization extensions support these fault address
registers:
 * HDFAR: aliased with AArch64 FAR_EL2[31:0] and AArch32 DFAR(S)
 * HIFAR: aliased with AArch64 FAR_EL2[63:32] and AArch32 IFAR(S)

Implement the accessors for these. This fixes in passing a bug
where we weren't implementing the "RES0 from EL3 if EL2 not
implemented" behaviour for AArch64 FAR_EL2.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-7-peter.maydell@linaro.org
2018-08-20 11:24:32 +01:00
Peter Maydell
d79e0c0608 target/arm: Implement AArch32 HVBAR
Implement the AArch32 HVBAR register; we can do this just by
making the existing VBAR_EL2 regdefs be STATE_BOTH.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-5-peter.maydell@linaro.org
2018-08-20 11:24:32 +01:00
Peter Maydell
b5ede85bfb target/arm: Add missing .cp = 15 to HMAIR1 and HAMAIR1 regdefs
ARMCPRegInfo structs will default to .cp = 15 if they
are ARM_CP_STATE_BOTH, but not if they are ARM_CP_STATE_AA32
(because a coprocessor number of 0 is valid for AArch32).
We forgot to explicitly set .cp = 15 for the HMAIR1 and
HAMAIR1 regdefs, which meant they would UNDEF when the guest
tried to access them under cp15.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-3-peter.maydell@linaro.org
2018-08-20 11:24:31 +01:00
Peter Maydell
55b53c718b target/arm: Correct typo in HAMAIR1 regdef name
We implement the HAMAIR1 register as RAZ/WI; we had a typo in the
regdef, though, and were incorrectly naming it HMAIR1 (which is
a different register which we also implement as RAZ/WI).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-2-peter.maydell@linaro.org
2018-08-20 11:24:31 +01:00
Hans-Erik Floryd
3c54cf7705 imx_serial: Generate interrupt on receive data ready if enabled
Generate an interrupt if USR2_RDR and UCR4_DREN are both set.

Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Message-id: 1534341354-11956-1-git-send-email-hans-erik.floryd@rt-labs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-20 11:24:31 +01:00