If the property is not of the requested type, the getters will leak a
QObject.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-3-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Currently objects specified on the command-line are only partially
cleaned up when 'object_del' is issued in either HMP or QMP: the
object itself is fully finalized, but the QemuOpts are not removed.
This results in the following behavior:
x86_64-softmmu/qemu-system-x86_64 -monitor stdio \
-object memory-backend-ram,id=ram1,size=256M
QEMU 2.7.91 monitor - type 'help' for more information
(qemu) object_del ram1
(qemu) object_del ram1
object 'ram1' not found
(qemu) object_add memory-backend-ram,id=ram1,size=256M
Duplicate ID 'ram1' for object
Try "help object_add" for more information
which can be an issue for use-cases like memory hotplug.
This happens on the HMP side because hmp_object_add() attempts to
create a temporary QemuOpts entry with ID 'ram1', which ends up
conflicting with the command-line-created entry, since it was never
cleaned up during the previous hmp_object_del() call.
We address this by adding a check in user_creatable_del(), which
is called by both qmp_object_del() and hmp_object_del() to handle
the actual object cleanup, to determine whether an option group entry
matching the object's ID is present and removing it if it is.
Note that qmp_object_add() never attempts to create a temporary
QemuOpts entry, so it does not encounter the duplicate ID error,
which is why this isn't generally visible in libvirt.
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Daniel Berrange <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1496531612-22166-3-git-send-email-mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
cannot_instantiate_with_device_add_yet was introduced by commit
efec3dd631 to replace no_user. It was
supposed to be a temporary measure.
When it was introduced, we had 54
cannot_instantiate_with_device_add_yet=true lines in the code.
Today (3 years later) this number has not shrunk: we now have
57 cannot_instantiate_with_device_add_yet=true lines. I think it
is safe to say it is not a temporary measure, and we won't see
the flag go away soon.
Instead of a long field name that misleads people to believe it
is temporary, replace it a shorter and less misleading field:
user_creatable.
Except for code comments, changes were generated using the
following Coccinelle patch:
@@
expression DC;
@@
(
-DC->cannot_instantiate_with_device_add_yet = false;
+DC->user_creatable = true;
|
-DC->cannot_instantiate_with_device_add_yet = true;
+DC->user_creatable = false;
)
@@
typedef ObjectClass;
expression dc;
identifier class, data;
@@
static void device_class_init(ObjectClass *class, void *data)
{
...
dc->hotpluggable = true;
+dc->user_creatable = true;
...
}
@@
@@
struct DeviceClass {
...
-bool cannot_instantiate_with_device_add_yet;
+bool user_creatable;
...
}
@@
expression DC;
@@
(
-!DC->cannot_instantiate_with_device_add_yet
+DC->user_creatable
|
-DC->cannot_instantiate_with_device_add_yet
+!DC->user_creatable
)
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Thomas Huth <thuth@redhat.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-2-ehabkost@redhat.com>
[ehabkost: kept "TODO remove once we're there" comment]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
If trace backend is set to TRACE_NOP, trace_get_vcpu_event_count
returns 0, cause bitmap_new call abort.
The abort can be triggered as follows:
$ ./configure --enable-trace-backend=nop --target-list=x86_64-softmmu
$ gdb ./x86_64-softmmu/qemu-system-x86_64 -M q35,accel=kvm -m 1G
(gdb) bt
#0 0x00007ffff04e25f7 in raise () from /lib64/libc.so.6
#1 0x00007ffff04e3ce8 in abort () from /lib64/libc.so.6
#2 0x00005555559de905 in bitmap_new (nbits=<optimized out>)
at /home/root/git/qemu2.git/include/qemu/bitmap.h:96
#3 cpu_common_initfn (obj=0x555556621d30) at qom/cpu.c:399
#4 0x0000555555a11869 in object_init_with_type (obj=0x555556621d30, ti=0x55555656bbb0) at qom/object.c:341
#5 0x0000555555a11869 in object_init_with_type (obj=0x555556621d30, ti=0x55555656bd30) at qom/object.c:341
#6 0x0000555555a11efc in object_initialize_with_type (data=data@entry=0x555556621d30, size=76560,
type=type@entry=0x55555656bd30) at qom/object.c:376
#7 0x0000555555a12061 in object_new_with_type (type=0x55555656bd30) at qom/object.c:484
#8 0x0000555555a121c5 in object_new (typename=typename@entry=0x555556550340 "qemu64-x86_64-cpu")
at qom/object.c:494
#9 0x00005555557f6e3d in pc_new_cpu (typename=typename@entry=0x555556550340 "qemu64-x86_64-cpu", apic_id=0,
errp=errp@entry=0x5555565391b0 <error_fatal>) at /home/root/git/qemu2.git/hw/i386/pc.c:1101
#10 0x00005555557fa33e in pc_cpus_init (pcms=pcms@entry=0x5555565f9690)
at /home/root/git/qemu2.git/hw/i386/pc.c:1184
#11 0x00005555557fe0f6 in pc_q35_init (machine=0x5555565f9690) at /home/root/git/qemu2.git/hw/i386/pc_q35.c:121
#12 0x000055555574fbad in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4562
Signed-off-by: Anthony Xu <anthony.xu@intel.com>
Message-id: 1494369432-15418-1-git-send-email-anthony.xu@intel.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
object_property_add_child() references the child, unref it after to
avoid ref leaks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Commit 9a6d1ac assumed that 'qom-type' could be removed from QemuOpts
with no ill effects. However, this command line proves otherwise:
$ ./x86_64-softmmu/qemu-system-x86_64 -nodefaults -nographic -qmp stdio \
-object rng-random,filename=/dev/urandom,id=rng0 \
-device virtio-rng-pci,rng=rng0
qemu-system-x86_64: -object rng-random,filename=/dev/urandom,id=rng0: Parameter 'qom-type' is missing
Fix the regression by restoring qom-type in opts after its temporary
removal that was needed for the duration of user_creatable_add_opts().
Reported-by: Richard W. M. Jones <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20170323160315.19696-1-eblake@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A regression in commit 15c2f669e caused us to silently ignore
excess input to the QemuOpts visitor. Later, commit ea4641
accidentally abused that situation, by removing "qom-type" and
"id" from the corresponding QDict but leaving them defined in
the QemuOpts, when using the pair of containers to create a
user-defined object. Note that since we are already traversing
two separate items (a QDict and a QemuOpts), we are already
able to flag bogus arguments, as in:
$ ./x86_64-softmmu/qemu-system-x86_64 -nodefaults -nographic -qmp stdio -object memory-backend-ram,id=mem1,size=4k,bogus=huh
qemu-system-x86_64: -object memory-backend-ram,id=mem1,size=4k,bogus=huh: Property '.bogus' not found
So the only real concern is that when we re-enable strict checking
in the QemuOpts visitor, we do not want to start flagging the two
leftover keys as unvisited. Rearrange the code to clean out the
QemuOpts listing in advance, rather than removing items from the
QDict. Since "qom-type" is usually an automatic implicit default,
we don't have to restore it (this does mean that once instantiated,
QemuOpts is not necessarily an accurate representation of the
original command line - but this is not the first place to do that);
however "id" has to be put back (requiring us to cast away a const).
[As a side note, hmp_object_add() turns a QDict into a QemuOpts,
then calls user_creatable_add_opts() which converts QemuOpts into
a new QDict. There are probably a lot of wasteful conversions like
this, but cleaning them up is a much bigger task than the immediate
regression fix.]
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170322144525.18964-3-eblake@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The split between tests/test-qobject-input-visitor.c and
tests/test-qobject-input-strict.c now makes less sense than ever. The
next commit will take care of that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-20-git-send-email-armbru@redhat.com>
Commit 240f64b made all qobject input visitors created outside tests
strict, except for the one in object_property_set_qobject(). That one
was left behind only because Eric couldn't spare the time to figure
out whether making it strict would break anything, with a TODO
comment. Time to resolve it.
Strict makes a difference only for otherwise successful visits of QAPI
structs or unions. Let's examine what the callers of
object_property_set_qobject() visit:
* object_property_set_str(), object_property_set_bool(),
object_property_set_int() visit a QString, QBool, QInt,
respectively. Strictness can't matter.
* qmp_qom_set visits its @value argument. Comes straight from QMP and
can be anything ('any' in the QAPI schema). Strictness matters when
the property's set() method visits a struct or union QAPI type.
No such methods exist, thus switching to strict can't break
anything.
If we acquire such methods in the future, we'll *want* the visitor
to be strict, so that unexpected members get rejected as they should
be.
Switch to strict.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-18-git-send-email-armbru@redhat.com>
Merge the original development branch due to breakage caused by the
MTTCG merge.
Conflicts:
cpu-exec.c
translate-common.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This finally allows TCG to benefit from the iothread introduction: Drop
the global mutex while running pure TCG CPU code. Reacquire the lock
when entering MMIO or PIO emulation, or when leaving the TCG loop.
We have to revert a few optimization for the current TCG threading
model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not
kicking it in qemu_cpu_kick. We also need to disable RAM block
reordering until we have a more efficient locking mechanism at hand.
Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here.
These numbers demonstrate where we gain something:
20338 jan 20 0 331m 75m 6904 R 99 0.9 0:50.95 qemu-system-arm
20337 jan 20 0 331m 75m 6904 S 20 0.9 0:26.50 qemu-system-arm
The guest CPU was fully loaded, but the iothread could still run mostly
independent on a second core. Without the patch we don't get beyond
32206 jan 20 0 330m 73m 7036 R 82 0.9 1:06.00 qemu-system-arm
32204 jan 20 0 330m 73m 7036 S 21 0.9 0:17.03 qemu-system-arm
We don't benefit significantly, though, when the guest is not fully
loading a host CPU.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com>
[FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[EGC: fixed iothread lock for cpu-exec IRQ handling]
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: -smp single-threaded fix, clean commit msg, BQL fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
[PM: target-arm changes]
Acked-by: Peter Maydell <peter.maydell@linaro.org>
The icount interrupt flag and tcg_exit_req serve almost the same
purpose, let's make them completely the same.
The former TB_EXIT_REQUESTED and TB_EXIT_ICOUNT_EXPIRED cases are
unified, since we can distinguish them from the value of the
interrupt flag.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
it's not very convenient to use the crash-information property interface,
so provide a CPU class callback to get the guest crash information, and pass
that information in the event
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-Id: <1487053524-18674-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In BE32 mode, sub-word size watchpoints can fail to trigger because the
address of the access is adjusted in the opcode helpers before being
compared with the watchpoint registers. This patch reverses the address
adjustment before performing the comparison with the help of a new CPUClass
hook.
This version of the patch augments and tidies up comments a little.
Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: caaf64ffc72f6ae183015337b7afdbd4b8989cb6.1484929304.git.julian@codesourcery.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce rules in the top level Makefile that are able to generate
trace.[ch] files in every subdirectory which has a trace-events file.
The top level directory is handled specially, so instead of creating
trace.h, it creates trace-root.h. This allows sub-directories to
include the top level trace-root.h file, without ambiguity wrt to
the trace.g file in the current sub-dir.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170125161417.31949-7-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that CPUs show up in the help text of "-device ?",
we should group them into an appropriate category.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1484917276-7107-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no need to have those functions as public API.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Move the generic cpu_synchronize_ functions to the common hw_accel.h header,
in order to prepare for the addition of a second hardware accelerator.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <f5c3cffe8d520011df1c2e5437bb814989b48332.1484045952.git.vpalatin@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYeOOmAAoJEPvQ2wlanipE3ZUH/Rsfpl23kXCMmqoXEIhWXy+h
yf8ARWCmpU6UKfwb+sH4vLegBfU56f62vVkGQ6oaaAbuyQ4SxCUlZGMO/rqY8/TE
m57aM+VfEE+bIdinAtLjFM24EVp/exMfkeutK7ItzLv7GwlrBos0J5veyCuyJ15q
pccV24jrpbJGilEeJ2GblKp3r2I3dInQGauOQhtoP3MNjHmYNSQD7noSbdN/JiTR
9H2eV700pg3ZPaSfO+CTVQN+cHjK1FC6qLi6916YZY9llnSOnDAegBYgbwE1RIBw
AULpWrezYveKy71eFhHVtGxnPeCJ8J4GVECMK0P0cdxzprIXFh1kZezyM4bxAGk=
=sboI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-common-tlb-reset-20170113-r1' into staging
This is the same as the v3 posted except a re-base and a few extra signoffs
# gpg: Signature made Fri 13 Jan 2017 14:26:46 GMT
# gpg: using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-common-tlb-reset-20170113-r1:
cputlb: drop flush_global flag from tlb_flush
cpu_common_reset: wrap TCG specific code in tcg_enabled()
qom/cpu: move tlb_flush to cpu_common_reset
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"qom-list-types abstract=false" currently returns all interface
types, as if they were not abstract. Fix this by making sure all
interface types are abstract.
All interface types have instance_size == 0, so we can use
it to set abstract=true on type_initialize().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1481567461-2341-1-git-send-email-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need to disable per-vCPU events on a vCPU that is hot-unplugged to
keep the dynamic event state global counters consistent.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 148278748055.1404.1570530281528619895.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Both the cpu->tb_jmp_cache and SoftMMU TLB structures are only used
when running TCG code so we might as well skip them for anything else.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
It is a common thing amongst the various cpu reset functions want to
flush the SoftMMU's TLB entries. This is done either by calling
tlb_flush directly or by way of a general memset of the CPU
structure (sometimes both).
This moves the tlb_flush call to the common reset function and
additionally ensures it is only done for the CONFIG_SOFTMMU case and
when tcg is enabled.
In some target cases we add an empty end_of_reset_fields structure to the
target vCPU structure so have a clear end point for any memset which
is resetting value in the structure before CPU_COMMON (where the TLB
structures are).
While this is a nice clean-up in general it is also a precursor for
changes coming to cputlb for MTTCG where the clearing of entries
can't be done arbitrarily across vCPUs. Currently the cpu_reset
function is usually called from the context of another vCPU as the
architectural power up sequence is run. By using the cputlb API
functions we can ensure the right behaviour in the future.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Considering 'id' is mandatory for user_creatable objects/backends
and user_creatable_add_type() always has it as an argument
regardless of where from it is called CLI/monitor or QMP,
Fix issue by adding 'id' property to hostmem backends and
set it in user_creatable_add_type() for every object that
implements 'id' property. Then later at query-memdev time
get 'id' from object directly.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1484052795-158195-4-git-send-email-imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Simplify code by dropping ~57LOC by merging user_creatable_add()
into user_creatable_add_opts() and using the later from monitor.
Along with it allocate opts_visitor_new() once in user_creatable_add_opts().
As result we have one less API func and a more readable/simple
user_creatable_add_opts() vs user_creatable_add().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1484052795-158195-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The QmpOutputVisitor has no direct dependency on QMP. It is
valid to use it anywhere that one wants a QObject. Rename it
to better reflect its functionality as a generic QAPI
to QObject converter.
The commit before previous renamed the files, this one renames C
identifiers.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1475246744-29302-6-git-send-email-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Split into file rename and identifier rename]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The QmpInputVisitor has no direct dependency on QMP. It is
valid to use it anywhere that one has a QObject. Rename it
to better reflect its functionality as a generic QObject
to QAPI converter.
The previous commit renamed the files, this one renames C identifiers.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1475246744-29302-5-git-send-email-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Straightforwardly rebased, split into file and identifier rename]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The QMP visitors have no direct dependency on QMP. It is
valid to use them anywhere that one has a QObject. Rename them
to better reflect their functionality as a generic QObject
to QAPI converter.
This is the first of three parts: rename the files. The next two
parts will rename C identifiers. The split is necessary to make git
rename detection work.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Split into file and identifier rename, two comments touched up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
As cpu_exec_exit() mirrors the cpu_exec_realizefn(),
rename it as cpu_exec_unrealizefn().
Create and register a cpu_common_unrealizefn() function for
the CPU device class and call cpu_exec_unrealizefn() from
this function.
Remove cpu_exec_exit() from cpu_common_finalize()
(which mirrors init, not realize), and as x86_cpu_unrealizefn()
and ppc_cpu_unrealizefn() overwrite the device class unrealize function,
add a call to a parent_unrealize pointer.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Put in cpu_exec_initfn() what initializes the CPU,
and leave in cpu_exec_init() what adds it to the environment.
As cpu_exec_initfn() is called by all XX_cpu_initfn(), call it
directly in cpu_common_initfn().
cpu_exec_init() is now a realize function, it will be renamed
to cpu_exec_realizefn() and moved to the XX_cpu_realizefn()
function in a following patch.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The CPUState struct has a bitmap tracking which VCPU
events are currently active. This is indexed based on
the event ID values, and sized according the maximum
TraceEventVCPUID enum value.
When we start dynamically assigning IDs at runtime,
we can't statically declare a bitmap without making
an assumption about the max event count. This problem
can be solved by dynamically allocating the per-CPU
dstate bitmap.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-15-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ThreadSanitizer picks up potential races although we already use
barriers to ensure things are in the correct order when processing exit
requests. For true C11 defined behaviour across threads we need to use
relaxed atomic_set/atomic_read semantics to reassure tsan.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160930213106.20186-9-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The ThreadSanitizer rightly complains that something initialised with a
normal access is later updated and read atomically.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160930213106.20186-8-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The idiom CPU_GET_CLASS(cpu) is fairly extensively used in various
threads and trips of ThreadSanitizer due to the fact it updates
obj->class->object_cast_cache behind the scenes. As this is just a
fast-path cache there is no need to lock updates.
However to ensure defined C11 behaviour across threads we need to use
the plain atomic_read/set primitives and keep the sanitizer happy.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160930213106.20186-7-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Every time a vCPU is hot-plugged, it will "inherit" its tracing state
from the global state array. That is, if *any* existing vCPU has an
event enabled, new vCPUs will have too.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 147428970768.15111.7664565956870423529.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Running cpuid instructions with a simple run like:
i386-linux-user/qemu-i386 tests/tcg/sha1-i386
Results in the following assert:
#0 0x00007ffff64246f5 in raise () from /lib64/libc.so.6
#1 0x00007ffff64262fa in abort () from /lib64/libc.so.6
#2 0x00007ffff7937ec5 in g_assertion_message () from /lib64/libglib-2.0.so.0
#3 0x00007ffff7937f5a in g_assertion_message_expr () from /lib64/libglib-2.0.so.0
#4 0x000055555561b54c in apicid_bitwidth_for_count (count=0) at /home/elmarco/src/qemu/include/hw/i386/topology.h:58
#5 0x000055555561b58a in apicid_smt_width (nr_cores=0, nr_threads=0) at /home/elmarco/src/qemu/include/hw/i386/topology.h:67
#6 0x000055555561b5c3 in apicid_core_offset (nr_cores=0, nr_threads=0) at /home/elmarco/src/qemu/include/hw/i386/topology.h:82
#7 0x000055555561b5e3 in apicid_pkg_offset (nr_cores=0, nr_threads=0) at /home/elmarco/src/qemu/include/hw/i386/topology.h:89
#8 0x000055555561dd86 in cpu_x86_cpuid (env=0x555557999550, index=4, count=3, eax=0x7fffffffcae8, ebx=0x7fffffffcaec, ecx=0x7fffffffcaf0, edx=0x7fffffffcaf4) at /home/elmarco/src/qemu/target-i386/cpu.c:2405
#9 0x0000555555638e8e in helper_cpuid (env=0x555557999550) at /home/elmarco/src/qemu/target-i386/misc_helper.c:106
#10 0x000055555599dc5e in static_code_gen_buffer ()
#11 0x00005555555952f8 in cpu_tb_exec (cpu=0x5555579912d0, itb=0x7ffff4371ab0) at /home/elmarco/src/qemu/cpu-exec.c:166
#12 0x0000555555595c8e in cpu_loop_exec_tb (cpu=0x5555579912d0, tb=0x7ffff4371ab0, last_tb=0x7fffffffd088, tb_exit=0x7fffffffd084, sc=0x7fffffffd0a0) at /home/elmarco/src/qemu/cpu-exec.c:517
#13 0x0000555555595e50 in cpu_exec (cpu=0x5555579912d0) at /home/elmarco/src/qemu/cpu-exec.c:612
#14 0x00005555555c065b in cpu_loop (env=0x555557999550) at /home/elmarco/src/qemu/linux-user/main.c:297
#15 0x00005555555c25b2 in main (argc=2, argv=0x7fffffffd848, envp=0x7fffffffd860) at /home/elmarco/src/qemu/linux-user/main.c:4803
The fields are set in qemu_init_vcpu() with softmmu, but it's a stub
with linux-user.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It keeps the legacy behavior for all users that doesn't care
about stable cpu_index value, but would allow boards that
would support device_add/device_del to set stable cpu_index
that won't depend on order in which cpus are created/destroyed.
While at that simplify cpu_get_free_index() as cpu_index
generated by USER_ONLY and softmmu variants is the same
since none of the users support cpu-remove so far, except
of not yet released spapr/x86 device_add/delr, which
will be altered by follow up patches to set stable
cpu_index manually.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic
tracing state of events with the 'vcpu' property.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Considering that features are converted to global properties and
global properties are automatically applied to every new instance
of created CPU (at object_new() time), there is no point in
parsing cpu_model string every time a CPU created. So move
parsing outside CPU creation loop and do it only once.
Parsing also should be done before any CPU is created so that
features would affect the first CPU a well.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Considering that features are converted to global properties and
global properties are automatically applied to every new instance
of created CPU (at object_new() time), there is no point in
parsing cpu_model string every time a CPU created. So move
parsing outside CPU creation loop and do it only once.
Parsing also should be done before any CPU is created so that
features would affect the first CPU a well.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently CPUClass->parse_features() is used to parse -cpu
features string and set properties on created CPU instances.
But considering that features specified by -cpu apply to every
created CPU instance, it doesn't make sense to parse the same
features string for every CPU created. It also makes every target
that cares about parsing features string explicitly call
CPUClass->parse_features() parser, which gets in a way if we
consider using generic device_add for CPU hotplug as device_add
has not a clue about CPU specific hooks.
Turns out we can use global properties mechanism to set
properties on every created CPU instance for a given type. That
way it's possible to convert CPU features into a set of global
properties for CPU type specified by -cpu cpu_model and common
Device.device_post_init() will apply them to CPU of given type
automatically regardless whether it's manually created CPU or CPU
created with help of device_add.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Making each output visitor provide its own output collection
function was the only remaining reason for exposing visitor
sub-types to the rest of the code base. Add a polymorphic
visit_complete() function which is a no-op for input visitors,
and which populates an opaque pointer for output visitors. For
maximum type-safety, also add a parameter to the output visitor
constructors with a type-correct version of the output pointer,
and assert that the two uses match.
This approach was considered superior to either passing the
output parameter only during construction (action at a distance
during visit_free() feels awkward) or only during visit_complete()
(defeating type safety makes it easier to use incorrectly).
Most callers were function-local, and therefore a mechanical
conversion; the testsuite was a bit trickier, but the previous
cleanup patch minimized the churn here.
The visit_complete() function may be called at most once; doing
so lets us use transfer semantics rather than duplication or
ref-count semantics to get the just-built output back to the
caller, even though it means our behavior is not idempotent.
Generated code is simplified as follows for events:
|@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP
| QDict *qmp;
| Error *err = NULL;
| QMPEventFuncEmit emit;
|- QmpOutputVisitor *qov;
|+ QObject *obj;
| Visitor *v;
| q_obj_ACPI_DEVICE_OST_arg param = {
| info
|@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP
|
| qmp = qmp_event_build_dict("ACPI_DEVICE_OST");
|
|- qov = qmp_output_visitor_new();
|- v = qmp_output_get_visitor(qov);
|+ v = qmp_output_visitor_new(&obj);
|
| visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err);
| if (err) {
|@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP
| goto out;
| }
|
|- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov));
|+ visit_complete(v, &obj);
|+ qdict_put_obj(qmp, "data", obj);
| emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err);
and for commands:
| {
| Error *err = NULL;
|- QmpOutputVisitor *qov = qmp_output_visitor_new();
| Visitor *v;
|
|- v = qmp_output_get_visitor(qov);
|+ v = qmp_output_visitor_new(ret_out);
| visit_type_AddfdInfo(v, "unused", &ret_in, &err);
|- if (err) {
|- goto out;
|+ if (!err) {
|+ visit_complete(v, ret_out);
| }
|- *ret_out = qmp_output_get_qobject(qov);
|-
|-out:
| error_propagate(errp, err);
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
qmp_output_visitor_cleanup(); however, we still need to
expose the subtype for qmp_output_get_qobject().
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-10-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
string_output_visitor_cleanup(); however, we still need to
expose the subtype for string_output_get_string().
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-9-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
qmp_input_visitor_cleanup(); which in turn means we no longer
need to return a subtype from qmp_input_visitor_new() nor a
public upcast function.
Generated code changes to qmp-marshal.c look like:
|@@ -52,11 +52,10 @@ void qmp_marshal_add_fd(QDict *args, QOb
| {
| Error *err = NULL;
| AddfdInfo *retval;
|- QmpInputVisitor *qiv = qmp_input_visitor_new(QOBJECT(args), true);
| Visitor *v;
| q_obj_add_fd_arg arg = {0};
|
|- v = qmp_input_get_visitor(qiv);
|+ v = qmp_input_visitor_new(QOBJECT(args), true);
| visit_start_struct(v, NULL, NULL, 0, &err);
| if (err) {
| goto out;
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-8-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
string_input_visitor_cleanup(); which in turn means we no longer
need to return a subtype from string_input_visitor_new() nor a
public upcast function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-7-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
opts_visitor_cleanup(); which in turn means we no longer need
to return a subtype from opts_visitor_new() nor a public upcast
function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-6-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rather than making the dealloc visitor track of stack of pointers
remembered during visit_start_* in order to free them during
visit_end_*, it's a lot easier to just make all callers pass the
same pointer to visit_end_*. The generated code has access to the
same pointer, while all other users are doing virtual walks and
can pass NULL. The dealloc visitor is then greatly simplified.
All three visit_end_*() functions intentionally take a void**,
even though the visit_start_*() functions differ between void**,
GenericList**, and GenericAlternate**. This is done for several
reasons: when doing a virtual walk, passing NULL doesn't care
what the type is, but when doing a generated walk, we already
have to cast the caller's specific FOO* to call visit_start,
while using void** lets us use visit_end without a cast. Also,
an upcoming patch will add a clone visitor that wants to use
the same implementation for all three visit_end callbacks,
which is made easier if all three share the same signature.
For visitors with already track per-object state (the QMP visitors
via a stack, and the string visitors which do not allow nesting),
add an assertion that the caller is indeed passing the same
pointer to paired calls.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-4-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJXaFInAAoJEJykq7OBq3PI6VsH/0Sfgbdo1RksYuQwb/y92sCW
EN+lxUZ+OLfgrc8PYgNZwfSM3rsfYhznL0MAXOeEe7Ahabi07w7DhGR8WvwfAOlI
G96FRuvrIPfv5u6U6fwS4CvG3TIHVLxfHKCsTpPUmH8U5CNx/x/tpjNiWN1dj6t+
sXybSjYHfZfiZy2tI9MFIFWCdxnF/pl0QAPhbRqc8Y/RQTDrPKRjLpz+nitN/u96
5TS7KlELyQuP91YMmLceYSmIkHbxW703h+iE2n4hov0uZCP8Jil+2Jsd3ziQSRlL
j6LqexQ2ViBGdDSfiZGYES2VPlsHOCwb4G+IgWBStfZg1ppaXENvcDzPrgrB+L4=
=eUnF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 20 Jun 2016 21:29:27 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request: (42 commits)
trace: split out trace events for linux-user/ directory
trace: split out trace events for qom/ directory
trace: split out trace events for target-ppc/ directory
trace: split out trace events for target-s390x/ directory
trace: split out trace events for target-sparc/ directory
trace: split out trace events for net/ directory
trace: split out trace events for audio/ directory
trace: split out trace events for ui/ directory
trace: split out trace events for hw/alpha/ directory
trace: split out trace events for hw/arm/ directory
trace: split out trace events for hw/acpi/ directory
trace: split out trace events for hw/vfio/ directory
trace: split out trace events for hw/s390x/ directory
trace: split out trace events for hw/pci/ directory
trace: split out trace events for hw/ppc/ directory
trace: split out trace events for hw/9pfs/ directory
trace: split out trace events for hw/i386/ directory
trace: split out trace events for hw/isa/ directory
trace: split out trace events for hw/sd/ directory
trace: split out trace events for hw/sparc/ directory
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move all trace-events for files in the qom/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-40-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
error_propagate() already ignores local_err==NULL, so there's no
need to check it before calling.
Coccinelle patch used to perform the changes added to
scripts/coccinelle/error_propagate_null.cocci.
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-2-git-send-email-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add an API object_type_get_size(const char *typename) that returns the
instance_size of the give typename.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This field was used for telling cpu_interrupt() to unlink a chain of TBs
being executed when it worked that way. Now, cpu_interrupt() don't do
this anymore. So we don't need this field anymore.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1462273462-14036-1-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
As mentioned in previous patches, we want to call visit_end_struct()
functions unconditionally, so that visitors can release resources
tied up since the matching visit_start_struct() without also having
to worry about error priority if more than one error occurs.
Even though error_propagate() can be safely used to ignore a second
error during cleanup caused by a first error, it is simpler if the
cleanup cannot set an error. So, split out the error checking
portion (basically, input visitors checking for unvisited keys) into
a new function visit_check_struct(), which can be safely skipped if
any earlier errors are encountered, and leave the cleanup portion
(which never fails, but must be called unconditionally if
visit_start_struct() succeeded) in visit_end_struct().
Generated code in qapi-visit.c has diffs resembling:
|@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v,
| goto out_obj;
| }
| visit_type_ACPIOSTInfo_members(v, obj, &err);
|- error_propagate(errp, err);
|- err = NULL;
|+ if (err) {
|+ goto out_obj;
|+ }
|+ visit_check_struct(v, &err);
| out_obj:
|- visit_end_struct(v, &err);
|+ visit_end_struct(v);
| out:
and in qapi-event.c:
@@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP
| goto out;
| }
| visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, ¶m, &err);
|- visit_end_struct(v, err ? NULL : &err);
|+ if (!err) {
|+ visit_check_struct(v, &err);
|+ }
|+ visit_end_struct(v);
| if (err) {
| goto out;
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-20-git-send-email-eblake@redhat.com>
[Conflict with a doc fixup resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The qmp-input visitor was allowing callers to play rather fast
and loose: when visiting a QDict, you could grab members of the
root dictionary without first pushing into the dict; the final
such culprit was the QOM code for converting to and from object
properties. But we are about to tighten the input visitor, at
which point user_creatable_add_type() as called with a QMP input
visitor via qmp_object_add() MUST follow the same paradigms as
everyone else, of pushing into the struct before grabbing its
keys.
The use of 'err ? NULL : &err' is temporary; a later patch will
clean that up when it splits visit_end_struct().
Furthermore, note that both callers always pass qdict, so we can
convert the conditional into an assert and reduce indentation.
The change has no impact to the testsuite now, but is required to
avoid a failure in tests/test-netfilter once qmp-input is made
stricter to detect inconsistent 'name' arguments on the root visit.
Since user_creatable_add_type() is also called with OptsVisitor
through user_creatable_add_opts(), we must also check that there
is no negative impact there; both pre- and post-patch, we see:
$ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio -object secret,id=sec0,data=letmein,format=raw,foo=bar
qemu-system-x86_64: -object secret,id=sec0,data=letmein,format=raw,foo=bar: Property '.foo' not found
That is, the only new checking that the new visit_end_struct() can
perform is for excess input, but we already catch excess input
earlier in object_property_set().
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-10-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The following uses of a QMP input visitor should be strict
(that is, excess keys in QDict input should be flagged if not
converted to QAPI):
- Testsuite code unrelated to explicitly testing non-strict
mode (test-qmp-commands, test-visitor-serialization); since
we want more code to be strict by default, having more tests
of strict mode doesn't hurt
- Code used for cloning QAPI objects (replay-input.c,
qemu-sockets.c); we are reparsing a QObject just barely
produced by the qmp output visitor and which therefore should
not have any garbage, so while it is extra work to be strict,
it validates that our clone is correct [note that a later patch
series will simplify these two uses by creating an actual
clone visitor that is much more efficient than a
generate/reparse cycle]
- qmp_object_add(), which calls into user_creatable_add_type().
Since command line parsing for '-object' uses the same
user_creatable_add_type() through the OptsVisitor, and that is
always strict, we want to ensure that any nested dictionaries
would be treated the same in QMP and from the command line (I
don't actually know if such nested dictionaries exist). Note
that on this code change, strictness only matters for nested
dictionaries (if even possible), since we already flag excess
input at the top level during an earlier object_property_set()
on an unknown key, whether from QemuOpts:
$ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio -object secret,id=sec0,data=letmein,format=raw,foo=bar
qemu-system-x86_64: -object secret,id=sec0,data=letmein,format=raw,foo=bar: Property '.foo' not found
or from QMP:
$ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 93, "minor": 5, "major": 2}, "package": ""}, "capabilities": []}}
{"execute":"qmp_capabilities"}
{"return": {}}
{"execute":"object-add","arguments":{"qom-type":"secret","id":"sec0","props":{"format":"raw","data":"letmein","foo":"bar"}}}
{"error": {"class": "GenericError", "desc": "Property '.foo' not found"}}
The only remaining uses of non-strict input visits are:
- QMP 'qom-set' (which eventually executes
object_property_set_qobject()) - mark it as something to revisit
in the future (I didn't want to spend any more time on this patch
auditing if we have any QOM dictionary properties that might be
impacted, and couldn't easily prove whether this code path is
shared with anything else).
- test-qmp-input-visitor: explicit tests of non-strict mode. If
we later get rid of users that don't need strictness, then this
test should be merged with test-qmp-input-strict
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-7-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rather than having two separate ways to create a QMP input
visitor, where the safer approach has the more verbose name,
it is better to consolidate things into a single function
where the caller must explicitly choose whether to be strict
or to ignore excess input. This patch is the strictly
mechanical conversion; the next patch will then audit which
uses can be made stricter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-6-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qemu_opts_foreach() runs its callback with the error location set to
the option's location. Any errors the callback reports use the
option's location automatically.
Commit 90998d5 moved the actual error reporting from "inside"
qemu_opts_foreach() to after it. Here's a typical hunk:
if (qemu_opts_foreach(qemu_find_opts("object"),
- object_create,
- object_create_initial, NULL)) {
+ user_creatable_add_opts_foreach,
+ object_create_initial, &err)) {
+ error_report_err(err);
exit(1);
}
Before, object_create() reports from within qemu_opts_foreach(), using
the option's location. Afterwards, we do it after
qemu_opts_foreach(), using whatever location happens to be current
there. Commonly a "none" location.
This is because Error objects don't have location information.
Problematic.
Reproducer:
$ qemu-system-x86_64 -nodefaults -display none -object secret,id=foo,foo=bar
qemu-system-x86_64: Property '.foo' not found
Note no location. This commit restores it:
qemu-system-x86_64: -object secret,id=foo,foo=bar: Property '.foo' not found
Note that the qemu_opts_foreach() bug just fixed could mask the bug
here: if the location it leaves dangling hasn't been clobbered, yet,
it's the correct one.
Reported-by: Eric Blake <eblake@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1461767349-15329-4-git-send-email-armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Paragraph on Error added to commit message]
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The QMP monitor code has two helper methods object_add
and qmp_object_del that are called from several places
in the code (QMP, HMP and main emulator startup).
The HMP and main emulator startup code also share
further logic that extracts the qom-type & id
values from a qdict.
We soon need to use this logic from qemu-img, qemu-io
and qemu-nbd too, but don't want those to depend on
the monitor, nor do we want to duplicate the code.
To avoid this, move some code out of qmp.c and hmp.c
adding new methods to qom/object_interfaces.c
- user_creatable_add - takes a QDict holding a full
object definition & instantiates it
- user_creatable_add_type - takes an ID, type name,
and QDict holding object properties & instantiates
it
- user_creatable_add_opts - takes a QemuOpts holding
a full object definition & instantiates it
- user_creatable_add_opts_foreach - variant on
user_creatable_add_opts which can be directly used
in conjunction with qemu_opts_foreach.
- user_creatable_del - takes an ID and deletes the
corresponding object
The existing code is updated to use these new methods.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When QEMU watchpoint matches, that is not definitely an architectural
watchpoint match yet. If it is a stop-before-access watchpoint then that
is hardly possible to ignore it after throwing a TCG exception.
A special callback is introduced to check for architectural watchpoint
match before raising a TCG exception.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454256948-10485-2-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
visit_start_struct() and visit_type_enum() had a 'kind' argument
that was usually set to either the stringized version of the
corresponding qapi type name, or to NULL (although some clients
didn't even get that right). But nothing ever used the argument.
It's even hard to argue that it would be useful in a debugger,
as a stack backtrace also tells which type is being visited.
Therefore, drop the 'kind' argument as dead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-22-git-send-email-eblake@redhat.com>
[Harmless rebase mistake cleaned up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.
Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).
@ rule1 @
identifier fn;
typedef Object, Visitor, Error;
identifier obj, v, opaque, name, errp;
@@
void fn
- (Object *obj, Visitor *v, void *opaque, const char *name,
+ (Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp) { ... }
@@
identifier rule1.fn;
expression obj, v, opaque, name, errp;
@@
fn(obj, v,
- opaque, name,
+ name, opaque,
errp)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No need to repeat 'struct Visitor' when we already have it in
typedefs.h. Omitting the redundant 'struct' also makes a later
patch easier to search for all object property callbacks that
are associated with a Visitor.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-18-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-13-git-send-email-peter.maydell@linaro.org
Split the bits that require it to exec/log.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-8-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently the ObjectProperty iterator API works as follows:
ObjectPropertyIterator *iter;
iter = object_property_iter_init(obj);
while ((prop = object_property_iter_next(iter))) {
...
}
object_property_iter_free(iter);
This has the benefit that the ObjectPropertyIterator struct
can be opaque, but has the downside that callers need to
explicitly call a free function. It is also not in keeping
with iterator style used elsewhere in QEMU/GLib2.
This patch changes the API to use stack allocation instead:
ObjectPropertyIterator iter;
object_property_iter_init(&iter, obj);
while ((prop = object_property_iter_next(&iter))) {
...
}
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[AF: Fused ObjectPropertyIterator struct with typedef]
Signed-off-by: Andreas Färber <afaerber@suse.de>
When there are many instances of a given class, registering
properties against the instance is wasteful of resources. The
majority of objects have a statically defined list of possible
properties, so most of the properties are easily registerable
against the class. Only those properties which are conditionally
registered at runtime need be recorded against the klass.
Registering properties against classes also makes it possible
to provide static introspection of QOM - currently introspection
is only possible after creating an instance of a class, which
severely limits its usefulness.
This impl only supports simple scalar properties. It does not
attempt to allow child object / link object properties against
the class. There are ways to support those too, but it would
make this patch more complicated, so it is left as an exercise
for the future.
There is no equivalent to object_property_del() provided, since
classes must be immutable once they are defined.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Only one of three architectures implementing qmp-dump-guest-memory write
qemu notes. And, another architecture (arm/aarch64) is coming, which
won't use them either. Make the common implementation truly common.
(No functional change.)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-3-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of using g_assert() for integer comparisons, use
g_assert_cmpint() so that we can see the respective values.
While at it, fix one stray indentation.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
ARM GICv3 systems with large number of CPUs create lots of IRQ pins. Since
every pin is represented as a property, number of these properties becomes
very large. Every property add first makes sure there's no duplicates.
Traversing the list becomes very slow, therefore QEMU initialization takes
significant time (several seconds for e. g. 16 CPUs).
This patch replaces list with GHashTable, making lookup very fast. The only
drawback is that object_child_foreach() and object_child_foreach_recursive()
cannot add or remove properties during traversal, since GHashTableIter does
not have modify-safe version. However, the code seems not to modify objects
via these functions.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Tested-by: Pavel Fedin <p.fedin@samsung.com>
[AF: Fixed object_property_del_{all,child}() issues;
g_hash_table_contains() -> g_hash_table_lookup(), suggested by Daniel]
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some users of QOM need to be able to iterate over properties
defined against an object instance. Currently they are just
directly using the QTAIL macros against the object properties
data structure.
This is bad because it exposes them to changes in the data
structure used to store properties, as well as changes in
functionality such as ability to register properties against
the class.
This provides an ObjectPropertyIterator struct which will
insulate the callers from the particular data structure
used to store properties. It can be used thus
ObjectProperty *prop;
ObjectPropertyIterator *iter;
iter = object_property_iter_init(obj);
while ((prop = object_property_iter_next(iter))) {
... do something with prop ...
}
object_property_iter_free(iter);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Tested-by: Pavel Fedin <p.fedin@samsung.com>
[AF: Fixed examples, style cleanups]
Signed-off-by: Andreas Färber <afaerber@suse.de>
A few uses of error_set(ERROR_CLASS_GENERIC_ERROR) were missed in
c6bd8c706, or have snuck in since. Nuke them.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447224690-9743-19-git-send-email-eblake@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
[Indentation tidied up, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Also change the misleading definition of macro OBJECT_CLASS_CHECK
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We had some pointless differences in the generated code for visit,
command marshalling, and events; unifying them makes it easier for
future patches to consolidate to common helper functions.
This is one patch of a series to clean up these differences.
This patch names the local visitor variable 'v' rather than 'm'.
Related objects, such as 'QapiDeallocVisitor', are also named by
their initials instead of an unrelated leading m.
No change in semantics to the generated code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1443565276-4535-12-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When a function returns a null pointer on error and only on error, you
can do
if (!foo(foos, errp)) {
... handle error ...
}
instead of the more cumbersome
Error *err = NULL;
if (!foo(foos, &err)) {
error_propagate(errp, err);
... handle error ...
}
A StringProperty's getter, however, may return null on success! We
then fail to call visit_type_str().
Screwed up in 6a146eb, v1.1.
Fails tests/qom-test in my current, heavily hacked QAPI branch. No
reproducer for master known (but I didn't look hard).
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
The argument for an Error **errp parameter must point to a null
pointer. If it doesn't, and an error happens, error_set() fails its
assertion.
Instead of
foo(foos, errp);
bar(bars, errp);
you need to do something like
Error *err = NULL;
foo(foos, &err);
if (err) {
error_propagate(errp, err);
goto out;
}
bar(bars, errp);
out:
Screwed up in commit 0e55884 (v1.3.0): property_get_bool().
Screwed up in commit 1f21772 (v2.1.0): object_property_get_enum() and
object_property_get_uint16List().
Screwed up in commit a8e3fbe (v2.4.0): property_get_enum(),
property_set_enum().
Found by inspection, no actual crashes observed.
Fix them up.
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: Hu Tao <hutao@cn.fujitsu.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
* Support for HyperV crash report
* Cleanup of target-specific HMP commands
* Multiarch batch
* Checkpatch fix for Perl 5.22
* NBD fix
* Revert incorrect commit 5243722376
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV+Y0VAAoJEL/70l94x66DppAH/393irRPGYJiZqClXDmPZymd
Ilv+mKQIA+QSGiMaVoq0POWqvSa6oPOIOAK8BexhHDWPnxDSeAU9JzjrkwQILjD3
A5kFsR1mhw/oV8aZCsE926SUoY90VH7QP2r0iGdur1VV9DG7CUE8q95umJuU1FCo
hvGI2HjlAPvxSrO+Y5vu4ZNOa5XBiUoLodT0j+jNZfoNMx3irAqkJLPqTUuPT8np
jBeu1MtMe3wNjDBm3WMVZwkNEZ3YtuhRkBeggXqDIl1Jm9lq4Eitk7rtETXm6yHz
Vjp9uAF4en/72gXbELRXp+aWvESEABcouLZrdPV/yjOmQD2oTFC7sZrm1c5rZPw=
=MkK8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Linux header update and cleanup
* Support for HyperV crash report
* Cleanup of target-specific HMP commands
* Multiarch batch
* Checkpatch fix for Perl 5.22
* NBD fix
* Revert incorrect commit 5243722376
# gpg: Signature made Wed 16 Sep 2015 16:39:01 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (24 commits)
nbd: release exp->blk after all clients are closed
checkpatch: Escape left braces in regex
monitor: uninclude cpu_ldst
include/exec: Move cputlb exec.c defs out
cputlb: Change tlb_set_dirty() arg to cpu
cputlb: move CPU_LOOP() for tlb_reset() to exec.c
translate: move real_host_page setting to -common
tcg: Move tci_tb_ptr to -common
tcg: split tcg_op_defs to -common
translate-all: Move tcg_handle_interrupt() to -common
cpu-exec: Migrate some generic fns to cpu-exec-common
qemu-char: Use g_new() & friends where that makes obvious sense
monitor: added generation of documentation for hmp-commands-info.hx
hmp-commands.hx: fix end of table info
monitor: remove target-specific code from monitor.c
hmp-commands-info: move info_cmds content out of monitor.c
i386/kvm: Hyper-v crash msrs set/get'ers and migration
kvm: Add kvm system event crash handler
cpu: Add crash_occurred flag into CPUState
target-i386: move asm-x86/hyperv.h to standard-headers
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CPUState::crash_occurred field inside CPUState marks
that guest crash occurred. This value is added into
cpu common migration subsection.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-12-git-send-email-den@openvz.org>
[Document the new field. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qom objects are currently added to common-obj-y
which is only linked into the system emulators. The
later crypto patches will depend on QOM infrastructure
and will also be used from tools binaries. Thus the QOM
objects are moved into a new qom-obj-y variable which
can be referenced when linking tools, system emulators
and tests.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
=nB06
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (44 commits)
cutils: work around platform differences in strto{l,ul,ll,ull}
cpu-exec: fix lock hierarchy for user-mode emulation
exec: make mmap_lock/mmap_unlock globally available
tcg: comment on which functions have to be called with mmap_lock held
tcg: add memory barriers in page_find_alloc accesses
remove unused spinlock.
replace spinlock by QemuMutex.
cpus: remove tcg_halt_cond and tcg_cpu_thread globals
cpus: protect work list with work_mutex
scripts/dump-guest-memory.py: fix after RAMBlock change
configure: Add support for jemalloc
add macro file for coccinelle
configure: factor out adding disas configure
vhost-scsi: fix wrong vhost-scsi firmware path
checkpatch: remove tests that are not relevant outside the kernel
checkpatch: adapt some tests to QEMU
CODING_STYLE: update mixed declaration rules
qmp: Add example usage of strto*l() qemu wrapper
cutils: Add qemu_strtoull() wrapper
cutils: Add qemu_strtoll() wrapper
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Protect the list of queued work items with something other than
the BQL, as a preparation for running the work items outside it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Useful for iterating through an entire QOM subtree.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441383782-24378-2-git-send-email-peter.maydell@linaro.org
After commit 626cf8f (icount: set can_do_io outside TB execution,
2014-12-08), can_do_io is set to 1 if not executing code. It is
no longer necessary to make this assumption in cpu_can_do_io.
It is also possible to remove the use_icount test, simply by
never setting cpu->can_do_io to 0 unless use_icount is true.
With these changes cpu_can_do_io boils down to a read of
cpu->can_do_io.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently CPUState::cpu_index is monotonically increasing and a newly
created CPU always gets the next higher index. The next available
index is calculated by counting the existing number of CPUs. This is
fine as long as we only add CPUs, but there are architectures which
are starting to support CPU removal, too. For an architecture like PowerPC
which derives its CPU identifier (device tree ID) from cpu_index, the
existing logic of generating cpu_index values causes problems.
With the currently proposed method of handling vCPU removal by parking
the vCPU fd in QEMU
(Ref: http://lists.gnu.org/archive/html/qemu-devel/2015-02/msg02604.html),
generating cpu_index this way will not work for PowerPC.
This patch changes the way cpu_index is handed out by maintaining
a bit map of the CPUs that tracks both addition and removal of CPUs.
The CPU bitmap allocation logic is part of cpu_exec_init(), which is
called by instance_init routines of various CPU targets. Newly added
cpu_exec_exit() API handles the deallocation part and this routine is
called from generic CPU instance_finalize.
Note: This new CPU enumeration is for !CONFIG_USER_ONLY only.
CONFIG_USER_ONLY continues to have the old enumeration logic.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
[AF: max_cpus -> MAX_CPUMASK_BITS]
Signed-off-by: Andreas Färber <afaerber@suse.de>
One small step in the simplification of cpu_exec_init().
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Error classes other than ERROR_CLASS_GENERIC_ERROR should not be used
in new code. Hiding them in QERR_ macros makes new uses hard to spot.
Fortunately, there's just one such macro left. Eliminate it with this
coccinelle semantic patch:
@@
expression EP, E;
@@
-error_set(EP, QERR_DEVICE_NOT_FOUND, E)
+error_set(EP, ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found", E)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
We require a C99 compiler, so let's use 'bool' instead of 'int'
when dealing with boolean values. There are few enough clients
to fix them all in one pass.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that properties can be explicitly registered as an enum
type, there is no need to pass the string table to the
object_get_enum() function. The object property registration
already has a pointer to the string table.
In changing this method signature, the hostmem backend object
has to be converted to use the new enum property registration
code, which simplifies it somewhat.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
A QOM property can be parsed as enum using the visit_type_enum()
helper function, but this forces callers to use the more complex
generic object_property_add() method when registering it. It
also requires that users of that object have access to the
string map when they want to read the property value.
This patch introduces a specialized object_property_add_enum()
method which simplifies the use of enum properties, so the
setters/getters directly get passed the int value.
typedef enum {
MYDEV_TYPE_FROG,
MYDEV_TYPE_ALLIGATOR,
MYDEV_TYPE_PLATYPUS,
MYDEV_TYPE_LAST
} MyDevType;
Then provide a table of enum <-> string mappings
static const char *const mydevtypemap[MYDEV_TYPE_LAST + 1] = {
[MYDEV_TYPE_FROG] = "frog",
[MYDEV_TYPE_ALLIGATOR] = "alligator",
[MYDEV_TYPE_PLATYPUS] = "platypus",
[MYDEV_TYPE_LAST] = NULL,
};
Assuming an object struct of
typedef struct {
Object parent_obj;
MyDevType devtype;
...other fields...
} MyDev;
The property can then be registered as follows:
static int mydev_prop_get_devtype(Object *obj,
Error **errp G_GNUC_UNUSED)
{
MyDev *dev = MYDEV(obj);
return dev->devtype;
}
static void mydev_prop_set_devtype(Object *obj,
int value,
Error **errp G_GNUC_UNUSED)
{
MyDev *dev = MYDEV(obj);
dev->devtype = value;
}
object_property_add_enum(obj, "devtype",
mydevtypemap, "MyDevType",
mydev_prop_get_devtype,
mydev_prop_set_devtype,
NULL);
Note there is no need to check the range of 'value' in
the setter, because the string->enum conversion code will
have already done that and reported an error as required.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The enum string table parameters in various QOM/QAPI methods
are declared 'const char *strings[]'. This results in const
warnings if passed a variable that was declared as
static const char * const strings[] = { .... };
Add the extra const annotation to the parameters, since
neither the string elements, nor the array itself should
ever be modified.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It is reasonably common to want to create an object, set a
number of properties, register it in the hierarchy and then
mark it as complete (if a user creatable type). This requires
quite a lot of error prone, verbose, boilerplate code to achieve.
First a pair of functions object_set_props() / object_set_propv()
are added which allow for a list of objects to be set in
one single API call.
Then object_new_with_props() / object_new_with_propv() constructors
are added which simplify the sequence of calls to create an
object, populate properties, register in the object composition
tree and mark the object complete, into a single method call.
Usage would be:
Error *err = NULL;
Object *obj;
obj = object_new_with_propv(TYPE_MEMORY_BACKEND_FILE,
object_get_objects_root(),
"hostmem0",
&err,
"share", "yes",
"mem-path", "/dev/shm/somefile",
"prealloc", "yes",
"size", "1048576",
NULL);
Note all property values are passed in string form and will
be parsed into their required data types, using normal QOM
semantics for parsing from string format.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add object_get_objects_root() function which is a convenience for
obtaining the Object * located at /objects in the object
composition tree. Convert existing code over to use the new
API where appropriate.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
With this, object_property_add_alias() callers can safely free the
target property name, like what already happens with the 'name' argument
to all object_property_add*() functions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
If backends implement the can_be_deleted and it returns false,
Then the qmp_object_del won't delete the given backends.
Signed-off-by: Lin Ma <lma@suse.com>
Message-Id: <1427704589-7688-2-git-send-email-lma@suse.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 8074264 (qom: Add description field in ObjectProperty struct)
introduced property descriptions and copied them for alias properties.
Instead of using the caller-supplied property name, use the returned
property name for setting the description. This avoids an Error when
setting a property description for a property with literal "[*]" that
doesn't exist due to automatic property naming in object_property_add().
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org (v2.2+)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Sparse report:
qom/cpu.c:99:5: warning: returning void-valued expression
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The mc146818rtc driver exposes the current RTC date and time via the "date"
property in QOM (which is also aliased to the machine's "rtc-time"
property). Currently it uses a custom visitor function rtc_get_date to
do this.
This patch introduces new helpers to the QOM core to expose struct tm
valued properties via a getter function, so that this functionality can be
more easily duplicated in other RTC implementations.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Remove the unused CPU hot-plug notifier.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Rather than an abort(). This allows callers to decide whether parenting
an already-parented object is a fatal error condition.
Useful for providing a default value for an object's parent in the case
where you want to set one iff it doesn't already have one.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By passing in "" to object_property_set_link.
The lead user of this is the QDEV GPIO framework which will implement
GPIO disconnects via an "unlink". GPIO disconnection is used by
qtest's irq_intercept_out command.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The descriptions can serve as documentation in the code,
and they can be used to provide better help.
Copy property descriptions when copying alias properties.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
object_property_add_alias() is called at some
places at present. And its parameter errp may not NULL,
such as
object_property_add_alias(obj, "iothread", OBJECT(&dev->vdev),"iothread",
&error_abort);
This patch add error handler for security.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Avoid the caller of object_property_print() leaking string
argument's memory, such as qdev_print_props() when
encounter errors.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Continuing the removal of ifdefs from cpu_exec.
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1410626734-3804-7-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for removing a bunch of ifdefs from cpu_exec.
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1410626734-3804-2-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If "[*]" is given as the last part of a QOM property name, treat that
as an array property. The added property is given the first available
name, replacing the * with a decimal number counting from 0.
First add with name "foo[*]" will be "foo[0]". Second "foo[1]" and so
on.
Callers may inspect the ObjectProperty * return value to see what
number the added property was given.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Current object_child_foreach() uses QTAILQ_FOREACH() to walk
through children and that makes children removal from the callback
impossible.
This makes object_child_foreach() use QTAILQ_FOREACH_SAFE().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
string_output_get_string() uses g_string_free(str, false) to
transfer the 'str' pointer to callers and never free it.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This ensures that the unparent callback is called automatically
when the parent object is finalized.
Note that there's no need to keep a reference neither in
object_unparent nor in object_finalize_child_property. The
reference held by the child property itself will do.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures that the children's unparent callback will still
have a usable parent.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just do nothing if passed NULL for a ref or unref. This avoids
call sites that manage a combination of NULL or non-NULL pointers
having to add iffery around every ref and unref.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Certain parts of the QOM framework test this pointer to determine if
an object is parented. Nuke it when the object is unparented to allow
for reuse of an object after unparenting.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Child properties must be unique. Fix this problem by
turning their aliases into links.
The resolve function that forwards to the target property
does not have any knowledge of the target property's type,
so it works fine.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It may be desirable to have custom link<> properties that do more
than just store an object. Even the addition of a "check"
function is not enough if setting the link has side effects
or if a non-standard reference counting is preferrable.
Avoid the assumption that the opaque field of a link<> is a
LinkProperty struct, by adding a generic "resolve" callback
to ObjectProperty. This fixes aliases of link properties.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sometimes an object needs to present a property which is actually on
another object, or it needs to provide an alias name for an existing
property.
Examples:
a.foo -> b.foo
a.old_name -> a.new_name
The new object_property_add_alias() API allows objects to alias a
property on the same object or another object. The source and target
names can be different.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
If we want to support targets that can change endianness (modern PPC and
ARM for the moment), we need to add a per-CPU class method to be called
from the virtio code. The virtio_ prefix in the name is a hint for people
to avoid misusage (aka. anywhere but from the virtio code).
The default behaviour is to return the compile-time default target
endianness.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Just hardcode them in the callers
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Commit 9561fda8d9 changed the type of
'opaque' for link properties, but missed updating this call site.
Reproducer:
./x86_64-softmmu/qemu-system-x86_64 -qmp unix:./qmp.sock,server &
./scripts/qmp/qmp-shell ./qmp.sock
(QEMU) qom-list path=//machine/i440fx/pci.0/child[2]
Reported-by: Marcin Gibuła <m.gibula@beyond.pl>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: 2f8f007ce2152ac3b65f0811199662799c509225.1397155389.git.crobinso@redhat.com
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are currently three types of object_property_add_link() callers:
1. The link property may be set at any time.
2. The link property of a DeviceState instance may only be set before
realize.
3. The link property may never be set, it is read-only.
Something similar can already be achieved with
object_property_add_str()'s set() argument. Follow its example and add
a check() argument to object_property_add_link().
Also provide default check() functions for case #1 and #2. Case #3 is
covered by passing a NULL function pointer.
Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Tweaked documentation comment]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some object_property_add_link() callers expect property deletion to
unref the link property object. Other callers expect to manage the
refcount themselves. The former are currently broken and therefore leak
the link property object.
This patch adds a flags argument to object_property_add_link() so the
caller can specify which refcount behavior they require. The new
OBJ_PROP_LINK_UNREF_ON_RELEASE flag causes the link pointer to be
unreferenced when the property is deleted.
This fixes refcount leaks in qdev.c, xilinx_axidma.c, xilinx_axienet.c,
s390-virtio-bus.c, virtio-pci.c, virtio-rng.c, and ui/console.c.
Rationale for refcount behavior:
* hw/core/qdev.c
- bus children are explicitly unreferenced, don't interfere
- parent_bus is essentially a read-only property that doesn't hold a
refcount, don't unref
- hotplug_handler is leaked, do unref
* hw/dma/xilinx_axidma.c
- rx stream "dma" links are set using set_link, therefore they
need unref
- tx streams are set using set_link, therefore they need unref
* hw/net/xilinx_axienet.c
- same reasoning as hw/dma/xilinx_axidma.c
* hw/pcmcia/pxa2xx.c
- pxa2xx bypasses set_link and therefore does not use refcounts
* hw/s390x/s390-virtio-bus.c
* hw/virtio/virtio-pci.c
* hw/virtio/virtio-rng.c
* ui/console.c
- set_link is used and there is no explicit unref, do unref
Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The error behavior of object_property_set_link() is dangerous. It sets
the link property object to NULL if an error occurs. A setter function
should either succeed or fail, it shouldn't leave the value NULL on
failure.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The path resolution logic in object_property_set_link() should be a
separate function. This makes the code easier to read and maintain.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
All targets using it gain the ability to set -cpu name,key=value,...
options via the default TYPE_CPU CPUClass::parse_features() implementation.
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUs who do not provide their own implementation of feature parsing
will treat each option as a QOM property and set it to the supplied
value.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Default to false.
Tidy variable naming and inline cast uses while at it.
Tested-by: Jia Liu <proljc@gmail.com> (or32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
cpu->exit_request is part of the execution environment and should
not be cleared when a CPU resets.
Otherwise, we might deadlock QEMU if a CPU resets while there is
I/O going on.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It is often useful to find an object's child property name. Also use
this new function to simplify the implementation of
object_get_canonical_path().
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When object_property_add_str() and object_property_add_bool() fail, they
leak their internal StringProperty and BoolProperty structs. Remember
to free the structs on error.
Luckily this is a low-impact memory leak since most QOM properties are
static qdev properties that will never take the error case.
object_property_add() only fails if the property name is already in use.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
This will be used by "info qtree". For numbers it prints both the
decimal and hex values. For sizes it rounds to the nearest power
of 2^10. For strings, it puts quotes around the string and separates
NULL and empty string.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduces USER_CREATABLE interface that must be implemented by
objects which are designed to created with -object CLI option or
object-add QMP command.
Interface provides an ability to do an optional second stage
initialization of the object created with -object/object-add
commands. By providing complete() callback, which is called
after the object properties were set.
It allows to:
* prevents misusing of -object/object-add by filtering out
objects that are not designed for it.
* generalize second stage backend initialization instead of
adding custom APIs to perform it
* early error detection of backend initialization at -object/
object-add time rather than through a proxy DEVICE object
that tries to use backend.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We should not modify the type hash table while it is being iterated on.
Assert that it does not happen.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
There should be no need to look up nor enumerate the interface "types",
whose "classes" are really just vtables. Just create the types and
add them to the interface list of the parent type.
Interfaces not registering their type anymore means that accessing
superclass::interface by type name will fail when initializing
subclass::interface. Thus, we need to pre-initialize the subclass's
parent_type field before calling type_initialize. Apart from this, the
interface "types" should never be used and thus it is harmless to leave
them out of the hashtable.
Further, the interface types had a bug with interfaces that are
inherited from a superclass: The implementation type name was wrong
(for example it was subclass::superclass::interface rather than
just subclass::interface). This patch fixes this as well.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The object-cast and class-cast caches cannot be shared because class
caching is conditional on the target type not being an interface and
object caching is unconditional. Leads to a bug when a class cast
to an interface follows an object cast to the same interface type:
FooObject = FOO(obj);
FooClass = FOO_GET_CLASS(obj);
Where TYPE_FOO is an interface. The first (object) cast will be
successful and cache the casting result (i.e. TYPE_FOO will be cached).
The second (class) cast will then check the shared cast cache
and register a hit. The issue is, when a class cast hits in the cache
it just returns a pointer cast of the input class (i.e. the concrete
class).
When casting to an interface, the cast itself must return the
interface class, not the concrete class. The implementation of class
cast caching already ensures that the returned cast result is only
a pointer cast before caching. The object cast logic however does
not have this check.
Resolve by just splitting the object and class caches.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Nathan Rossi <nathan.rossi@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In an ideal world, machines can be built by wiring devices together
with configuration, not code. Unfortunately, that's not the world we
live in right now. We still have quite a few devices that need to be
wired up by code. If you try to device_add such a device, it'll fail
in sometimes mysterious ways. If you're lucky, you get an
unmysterious immediate crash.
To protect users from such badness, DeviceClass member no_user used to
make device models unavailable with -device / device_add, but that
regressed in commit 18b6dad. The device model is still omitted from
help, but is available anyway.
Attempts to fix the regression have been rejected with the argument
that the purpose of no_user isn't clear, and it's prone to misuse.
This commit clarifies no_user's purpose. Anthony suggested to rename
it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which
I shorten somewhat to keep checkpatch happy. While there, make it
bool.
Every use of cannot_instantiate_with_device_add_yet gets a FIXME
comment asking for rationale. The next few commits will clean them
all up, either by providing a rationale, or by getting rid of the use.
With that done, the regression fix is hopefully acceptable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Save the result of the call to object_get_canonical_path()
so we can free it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
/iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
=CVfs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony: (39 commits)
ssdt-proc: update generated file
ssdt: fix PBLK length
i386: ACPI table generation code from seabios
pc: use new api to add builtin tables
acpi: add interface to access user-installed tables
hpet: add API to find it
pvpanic: add API to access io port
ich9: APIs for pc guest info
piix: APIs for pc guest info
acpi/piix: add macros for acpi property names
i386: define pc guest info
loader: allow adding ROMs in done callbacks
i386: add bios linker/loader
loader: use file path size from fw_cfg.h
acpi: ssdt pcihp: updat generated file
acpi: pre-compiled ASL files
acpi: add rules to compile ASL source
i386: add ACPI table files from seabios
q35: expose mmcfg size as a property
q35: use macro for MCFG property name
...
Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Make it easy to add read-only helpers for simple
integer properties in memory.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The x86 and ppc targets call cpu_synchronize_state() from their
*_cpu_dump_state() callbacks to ensure that up to date state is dumped
when KVM is enabled (for example when a KVM internal error occurs).
Move this call up into the generic cpu_dump_state() function so that
other KVM targets (namely MIPS) can take advantage of it.
This requires kvm_cpu_synchronize_state() and cpu_synchronize_state() to
be moved out of the #ifdef NEED_CPU_H in <sysemu/kvm.h> so that they're
accessible to qom/cpu.c.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: qemu-ppc@nongnu.org
Cc: kvm@vger.kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
* Conversion of global CPU list to QTAILQ - preparing for CPU hot-unplug
* Document X86CPU magic numbers for CPUID cache info
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=/bSY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into staging
QOM CPUState refactorings / X86CPU
* Conversion of global CPU list to QTAILQ - preparing for CPU hot-unplug
* Document X86CPU magic numbers for CPUID cache info
# gpg: Signature made Tue 03 Sep 2013 10:59:22 AM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber (3) and Eduardo Habkost (1)
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
target-i386: Use #defines instead of magic numbers for CPUID cache info
cpu: Replace qemu_for_each_cpu()
cpu: Use QTAILQ for CPU list
a15mpcore: Use qemu_get_cpu() for generic timers
It was introduced to loop over CPUs from target-independent code, but
since commit 182735efaf target-independent
CPUState is used.
A loop can be considered more efficient than function calls in a loop,
and CPU_FOREACH() hides implementation details just as well, so use that
instead.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This catches objects initializing beyond allocated memory, e.g.,
when subtypes get extended with instance state of their own.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed on to object_initialize_with_type().
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (virtio-ccw)
Signed-off-by: Andreas Färber <afaerber@suse.de>
This will allow classes to specify a function to be called after all
instance_init functions were called.
This will be used by DeviceState to call qdev_prop_set_globals() at the
right moment.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit a0e372f0c4 reorganized the register
counting for GDB. While it seems correct not to let the total number of
registers skyrocket in an SMP scenario through a static variable, the
distinction between total register count and 'g' packet register count
(last_reg vs. num_g_regs) got lost among the way.
Fix this by introducing CPUState::gdb_num_g_regs and using that in
gdb_handle_packet().
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org (stable-1.6)
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit c643bed99 moved qemu_init_vcpu() calls to common CPUState code.
This causes x86 cpu-add to fail with "KVM: setting VAPIC address failed".
The reason for the failure is that CPUClass::kvm_fd is not yet
initialized in the following call graph:
->x86_cpu_realizefn
->x86_cpu_apic_realize
->qdev_init
->device_set_realized
->device_reset (hotplugged == 1)
->apic_reset_common
->vapic_base_update
->kvm_apic_vapic_base_update
This causes attempted KVM vCPU ioctls to fail.
By contrast, in the non-hotplug case the APIC is reset much later, when
the vCPU is already initialized.
As a quick and safe solution, move the qemu_init_vcpu() call back into
the targets' realize functions.
Reported-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Acked-by: Igor Mammedov <imammedo@redhat.com> (for i386)
Tested-by: Jia Liu <proljc@gmail.com> (for openrisc)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Completes migration of target-specific code to new target-*/gdbstub.c.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUState::gdb_num_regs replaces num_g_regs.
CPUClass::gdb_num_core_regs replaces NUM_CORE_REGS.
Allows building gdb_register_coprocessor() for xtensa, too.
As a side effect this should fix coprocessor register numbering for SMP.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Its clear from the implementation that class casting is supposed to work
with a NULL class argument. Guard all dereferences of the class argument
against NULL accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 94cd5ba46b74eea289a7e582635820c1c54e66fa.1371546907.git.peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
x86 was using additional CPU_DUMP_* flags, so make that configurable in
CPUClass::reset_dump_flags.
This adds reset logging for alpha, unicore32 and xtensa.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Object reference counts will soon be changed outside the BQL. So we need
to use atomics in object_ref/unref.
Based on a patch by Liu Ping Fan.
Signed-off-by: Liu Ping Fan <qemulist@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows to move the call into CPUState's realizefn.
Therefore move the stub into libqemustub.a.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Make cpustats monitor command available unconditionally.
Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec()
arguments to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer depends on CPUArchState, so move it to qom/cpu.c.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
qemu_get_guest_memory_mapping() uses cpu_paging_enabled() to determine
whether to use cpu_get_memory_mapping() to return mappings or whether to
fall back to a simple identity map.
Since by default CPUClass::get_memory_mapping() is not implemented,
change the default to false to use the identity map by default.
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Relocate assignment of x86 get_arch_id to have all hooks in one place.
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
object_dynamic_cast_assert used to be tolerant of NULL objects and not
assert. It's clear from the implementation that this is the expected
behavior.
The preceding check of the cast cache dereferences obj however causing
a segfault. Fix by conditionalizing the cast cache logic on obj being
non-null.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 8e2bef6a55753869c50bfa32226f7fcf0439ca62.1369183592.git.peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a small typename cache to ObjectClass. This allows
caching positive casts within each ObjectClass. Benchmarking a
PPC workload provided by Aurelien, this patch eliminates every
single g_hash_table_lookup() happening during the benchmark (which
was about 2 million per-second).
With this patch applied, I get exactly the same performance (within
the margin of error) as with --disable-qom-cast-debug.
N.B. it's safe to cache typenames only from the _assert() macros
because they are always called with string literals.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Cast debugging can have a substantial cost (20% or more). Instead of adding
special-cased "fast casts" in the hot paths, we can just disable it in
releases. The tracing facilities we just added make it easier to analyze
those problems that cast debugging would reveal.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368188203-3407-7-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This provides a way to detect the cast that leads to a (reproducible)
crash even when QOM cast debugging is disabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368188203-3407-6-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For leaf classes, in many cases the callbacks will simply downcast
the object back to the original class. Add this fast path to
object_class_dynamic_cast, object_dynamic_cast will inherit it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368188203-3407-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This mimics what we do in object_dynamic_cast_assert.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368188203-3407-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
get_arch_id() adds possibility for generic code to get a guest-visible
CPU ID without accessing CPUArchState.
If derived classes don't override it, it will return cpu_index.
Override it on target-i386 in X86CPU to return the APIC ID.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: liguang <lig.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Hot-add CPU event will be distributed to acpi_piix4 and rtc_cmos.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
If hotplugged, synchronize CPU state to KVM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
When we try to cast an object to an unknown type, fail the cast. Today
we would simply run into an assert().
This fixes a bug on qemu-system-s390x for me that gets triggered by the
audio code looking for PCI and ISA buses.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1367326936-28539-1-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
An empty path will return the sole object of that type in the
QOM tree. This is different from "/", which returns the root.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-7-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Otherwise, device_unparent will fail to get a canonical path of
the object.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1364910600-3418-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Work by Alex to support VGA assignment,
pci and virtio fixes by Stefan, Jason and myself, and a
new qmp event for hotplug support by myself.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRUfDAAAoJECgfDbjSjVRp5wwH/RiNzEuC0SNuMArXh2LS+qjn
EavcSRTas5800Rl8bW2iYwJV38WhyW7jKs3JxbL5iK6XLeZvr7mureMRpsT6N5cR
WPqoZBw2jIxcHmYZODHTGd9SrAmF2LpfKypN3a86P5P4sQvV/dEusPQx7ZNyi5I5
kdhqNyP6Q6scAUbJVrNUbcOy8euLUtpEO2VQju/gikz2KLsQj6Hyxt9vKV2ZquYU
B7pKvYt5UZhNPqhfBmRptW+U0CMYUPiZBZkZsTEPUibIFHQqGkMD/KtthFFDZc/U
hjxttuETzjACR3KKgegwLVYCFEF8WadPJark4LWb4D9TA1MIdgo2NabNpqYxqrA=
=PY9F
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
virtio,pci,qom
Work by Alex to support VGA assignment,
pci and virtio fixes by Stefan, Jason and myself, and a
new qmp event for hotplug support by myself.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 26 Mar 2013 02:02:24 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Alex Williamson (13) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony: (23 commits)
pcie: Add endpoint capability initialization wrapper
roms: switch oldnoconfig to olddefconfig
pcie: Mangle types to match topology
pci: Create and use API to determine root buses
pci: Create pci_bus_is_express helper
pci: Q35, Root Ports, and Switches create PCI Express buses
pci: Allow PCI bus creation interfaces to specify the type of bus
pci: Move PCI and PCIE type defines
pci: Create and register a new PCI Express TypeInfo
exec: assert that RAMBlock size is non-zero
pci: refuse empty ROM files
pci_bridge: Remove duplicate IRQ swizzle function
pci_bridge: Use a default map_irq function
pci: Fix INTx routing notifier recursion
pci_bridge: drop formatting from source
pci_bridge: factor out common code
pci: Teach PCI Bridges about VGA routing
pci: Add PCI VGA helpers
virtio-pci: guest notifier mask without non-irqfd
virtio-net: remove layout assumptions for mq ctrl
...
It seems more logical to have destruction flow start with the subclass
and move up to the base class. This ensures object has a valid
canonical path when destructor is called.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Detect attempts to add a property to an object if one of
that name already exists, and report them as errors.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1364217314-7400-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move it to qom/cpu.c to avoid build failures depending on include order
of cpu-qom.h and exec/cpu-all.h.
Change opaques of various ..._irq_handler() functions to the
appropriate CPU type to facilitate using cpu_reset_interrupt().
Fix Coding Style issues while at it (missing braces, indentation).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
num_interfaces only tells you how many interfaces the concrete child class has
(as defined in the TypeInfo). This means if you have a child class which defines
no interfaces of its own, but its parent has interfaces you cannot cast to those
parent interfaces.
Fixed changing the guard to check the class->interfaces list instead (which is
a complete flattened list of implemented interfaces).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a8c2db3b9b1f3c4bb81aca352b69e33260f36545.1361246206.git.peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The QOM framework will attempt the recreate a classes interface list from
scratch for each class. This means that a child class should zero out the
list of interfaces when cloned from the parent class.
Currently the list is memcpy()d from the parent to the child. As the interface
list is just a pointer to a list, this means the parent and child will share
the same list of interfaces. When the child inits, it will append its own
interfaces to the parents list. This is incorrect as the parent should not pick
up its childs interfaces.
This actually causes an infinite loop at class init time, as the child will
iterate through the parent interface list adding each itf to its own list(in
type_initialize()). As the list is (erroneously) shared, the new interface
instances for the child are appended to the parent, and the iterator never hits
the tail and loops forever.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1f58d2b629d82865dbb2fd5ba8445854049c4382.1361246206.git.peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Explictly NULL it on CPU reset since it was located before breakpoints.
Change vapic_report_tpr_access() argument to CPUState. This also
resolves the use of void* for cpu.h independence.
Change vAPIC patch_instruction() argument to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
This is now unused. Document the initial reference count of an object
and when it will be freed/finalized.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid that the object disappears after it's deleted from the QOM
composition tree, in case that was the only reference to it.
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This lets a caller check if an ObjectClass as returned by, e.g.,
object_class_by_name() is instantiatable.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Introduce CPUClass::class_by_name and add a default implementation.
Hook up the alpha and ppc implementations.
Introduce a wrapper function cpu_class_by_name().
Signed-off-by: Andreas Färber <afaerber@suse.de>
All of universal-obj-y, user-obj-y (right now unused) and common-obj-y can
be unified into common-obj-y if we take care of defining CONFIG_SOFTMMU
and CONFIG_USER_ONLY in the toplevel makefile. This is similar to how
we define symbols for hardware components.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
A usage with a hardcoded partial path such as
object_resolve_path_component(obj, "foo")
is totally valid but currently leads to a compilation error. Fix this.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The directory descent mechanism, and a less-flat tree both helped
in making some *-obj-y definitions very short. Many of these
often end up in universal-obj-y, and used to be separate only
because of libuser (which is now part of history...).
Consolidate these variables in a single one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since 39bffca203 (qdev: register all
types natively through QEMU Object Model), TypeInfo as used in
the common, non-iterative pattern is no longer amended with information
and should therefore be const.
Fix the documented QOM examples:
sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h
Since frequently the wrong examples are being copied by contributors of
new devices, fix all types in the tree:
sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c
sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c
This also avoids to piggy-back these changes onto real functional
changes or other refactorings.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This finally makes the CPU class a subclass of the Device class,
allowing us to start using DeviceState properties on CPU subclasses.
It has no_user=1, as creating CPUs using -device doesn't work yet.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The file is only including error.h and qerror.h. Prefer explicit
inclusion of whatever files are needed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is not used anymore, and there is no need to make it public.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Store in the object the freeing function that will be used at deletion
time. This makes it possible to use object_delete on statically-allocated
(embedded) objects. Dually, it makes it possible to use object_unparent
and object_unref without leaking memory, when the lifetime of object
might extend until after the call to object_delete.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add an ObjectClass method that is done at object_unparent time. It
should remove any backlinks to the object in the composition tree,
so that object_delete will be able to drop the last reference and
free the object.
Use it for qdev buses.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The reference count for embedded objects is always one too low, because
object_initialize_with_type returns with zero references to the object.
This causes premature finalization of the object (or an assertion failure)
after calling object_ref to add an extra reference and object_unref to
remove it.
The fix is to move the initial object_ref call from object_new_with_type
to object_initialize_with_type.
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Trying to cast a NULL value will cause a crash. Returning
NULL is also sensible, and it is also what the type-unsafe
DO_UPCAST macro does.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
object_deinit is only called when the reference count goes to zero,
and yet tries to do an object_unparent. Now, object_unparent
either does nothing or it will decrease the reference count.
Because we know the reference count is zero, the object_unparent
call in object_deinit is useless.
Instead, we need to disconnect the object from its parent just
before we remove the last reference apart from the parent's. This
happens in object_delete. Once we do this, all calls to
object_unparent peppered through QEMU can go away.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The current implementation of Interfaces is poorly designed. Each interface
that an object implements ends up being an object that's tracked by the
implementing object. There's all sorts of gymnastics to deal with casting
between these objects.
But an interface shouldn't be associated with an Object. Interfaces are global
to a class. This patch moves all Interface knowledge to ObjectClass eliminating
the relationship between Object and Interfaces.
Interfaces are now abstract (as they should be) but this is okay. Interfaces
essentially act as additional parents for the classes and are treated as such.
With this new implementation, we should fully support derived interfaces
including reimplementing an inherited interface.
PC: Rebased against qom-next merge Jun-2012.
PC: Removed replication of cast logic for interfaces, i.e. there is only
one cast function - object_dynamic_cast() (and object_dynamic_cast_assert())
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Avoids duplicated error_set().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Also drop error_set() in object_property_del().]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Can be replaced everywhere with object_property_find().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Make qbus children show up as link<> properties. There is no stable
addressing for qbus children so we use an unstable naming convention.
This is okay in QOM though because the composition name is expected to
be what's stable.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Now that Object is a type, add an instance_init function and push
the "type" property from qdev to there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This protects against unwanted effects of changing TYPE_OBJECT from
NULL to a string.
Suggested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Right now the base Object class has a special NULL type. Change this so
that we will be able to add class_init and class_base_init callbacks.
To do this, remove some special casing of ObjectClass that is not really
necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The class_base_init TypeInfo callback was present in one of the early
QOM versions but removed (on my request...) before committing. We
will need it soon, add it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
A utility function that will be used to implement hierarchical realization.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
[AF: Drop unrelated whitespace change, add Returns: in documentation]
[AF: Use new object_property_is_child() helper.]
Signed-off-by: Andreas Färber <afaerber@suse.de>
This simple bit of functionality was missing and we'll need it soon,
so add it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
[AF: Document possible NULL return value]
Signed-off-by: Andreas Färber <afaerber@suse.de>
qom/ already used a separate makefile. Convert it to use relative
paths, and make it declare both common-obj-y and user-obj-y. This
way, the upper makefiles do not need to know that some QOM files
are compiled twice.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Otherwise, non-string properties without a legacy counterpart are missed.
Also fix error propagation in object_property_print() itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Valgrind reported this memory leak which occured very often.
Test scenario:
qemu-system-i386 (no arguments), only BIOS started, terminate with
monitor command (quit).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Specify the root to search from as argument. This avoids hardcoding
"/machine" in some places and makes it more flexible.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is QOM "mkdir -p". It is useful when referring to
container objects such as "/machine".
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Reintroduce CPUState as QOM object: It's abstract and derived directly
from TYPE_OBJECT for compatibility with the user emulators.
The identifier CPUState avoids conflicts between CPU() and the struct.
Introduce $(qom-twice-y) to build it separately for system and for user
emulators.
Prepare a virtual reset method, (re)introduce cpu_reset() as wrapper.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
This function allows to obtain a singly-linked list of classes, which
can be sorted by the caller.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Function name type_class_init() gave us a wrong impression of separation
of type's "class" and "object" entities initialization. Name type_initialize()
is more appropriate for type_class_init() function (considering what operations
it performs).
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QOM documentation states that for objects of type with @instance_size == 0 size
will be assigned to match parent object's size. But currently this feauture is
not implemented and qemu asserts during creation of object with zero instance_size.
Set appropriate value for type instance_size during type_class_init() call.
object_initialize_with_type() must call type_class_init() before asserting
type->instance_size, and object_new_with_type() must call type_class_init() before
object allocation.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Property removal modifies the list, so it is not safe to continue
iteration. We know anyway that each object can have only one
parent (see object_property_add_child), so exit after finding
the requested object.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the old implementation, if the new value of the property links
to the same object, as the old value, that object is first unref-ed,
and then ref-ed. This leads to unintended deinitialization of that object.
In the new implementation, this is fixed.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Barabash <alexander_barabash@mentor.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
