Pass voltage sensor properties to the sysctl device. Since
these are daughterboard specific, we specify them via the
VEDBoardInfo structure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1359985476-29380-9-git-send-email-peter.maydell@linaro.org
Implement the SYS_CFG_VOLT registers which return the voltage
of various supplies on motherboard and daughterboard. Since
QEMU implements a perfectly stable power supply these registers
always return a constant value. The number and value of the
daughterboard voltages is dependent on the specific daughterboard,
so we use a property array to allow the board to configure them
appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for declaring array properties for qdev devices.
These work by defining an initial static property 'len-arrayname'
which the user of the device should set to the desired size
of the array. When this property is set, memory is allocated
for the array elements, and dynamic properties "arrayname[0]",
"arrayname[1]"... are created so the user of the device can
then set the values of the individual array elements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert this device from old-style qdev init to an instance_init
function. We don't need a realize function yet, though.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SYS_CFG_DVIMODE allows the guest to select whether the
output DVI signal is VGA, SVGA, XGA, SGA or UXGA. Since
this makes no difference to QEMU, implement writes as a
no-op so Linux doesn't complain.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SYS_CFG_MUXFPGA allows the guest to select whether the
video output should come from the motherboard's LCD
controller or the daughterboard's one. Since QEMU doesn't
currently support selecting the video output like this,
implement as a no-op, so Linux doesn't complain about
the register not being implemented.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SYS_CFGCTRL register consists of separate fields
for DCC, function, site, position and device, as well
as a read/write bit. Refactor the code handling SYS_CFGCTRL
writes to make it easier to add support for functions
like SYS_CFG_OSC which support multiple device fields.
We also pull the handling out into its own function for
clarity, as there are potentially a lot of implementable
subfunctions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass the daughterboard-specific proc_id property to the code that
creates the sysctl device via the VEDBoardInfo struct, rather than
by having the daughterboard init function write to a uint32_t*
argument. This is a cleaner way to pass the info around, and
is in line with the way we are going to handle voltage and
oscillator initialization.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# By Stefan Hajnoczi (14) and others
# Via Stefan Hajnoczi
* stefanha/block: (28 commits)
blockdev: Fix up copyright and permission notice
qemu-iotests: use -nographic in test case 007
qemu-iotests: add tests for rebasing zero clusters
dataplane: fix hang introduced by AioContext transition
coroutine: use AioContext for CoQueue BH
threadpool: drop global thread pool
block: add bdrv_get_aio_context()
aio: add a ThreadPool instance to AioContext
threadpool: add thread_pool_new() and thread_pool_free()
threadpool: move globals into struct ThreadPool
main-loop: add qemu_get_aio_context()
sheepdog: set io_flush handler in do_co_req
sheepdog: use non-blocking fd in coroutine context
qcow2: make is_allocated return true for zero clusters
qcow2: drop unnecessary flush in qcow2_update_snapshot_refcount()
qcow2: drop flush in update_cluster_refcount()
qcow2: flush in qcow2_update_snapshot_refcount()
qcow2: set L2 cache dependency in qcow2_alloc_bytes()
qcow2: flush refcount cache correctly in qcow2_write_snapshots()
qcow2: flush refcount cache correctly in alloc_refcount_block()
...
# By Christian Borntraeger (1) and Cornelia Huck (1)
# Via Cornelia Huck
* cohuck/virtio-ccw-upstr:
virtio-ccw: Wire up virtio-rng.
virtio-ccw: remove qdev_unparent in unplug routing
Screwed up in commit 666daa68. Thanks to Kevin Wolf for reminding me
to fix this.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A comment explains that -nographic hangs test case 007. This is no
longer the case so add -nographic. This makes the test suite faster and
more pleasant to run since no windows pop up.
I am not sure exactly when -nographic starting working for this case but
there is no fundamental reason why graphics are needed here. Make sure
the serial port is not on stdio, it would conflict with the monitor.
Also remove unnecessary trailing whitespace on these lines.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
If zero clusters are erroneously treated as unallocated, "qemu-img rebase"
will copy the backing file's contents onto the cluster.
The bug existed also in image streaming, but since the root cause was in
qcow2's is_allocated implementation it is enough to test it with qemu-img.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The bug is that the EventNotifiers do have a NULL io_flush callback.
Because _none_ of the callbacks on the dataplane AioContext have such a
callback, aio_poll will simply do nothing. Fixed by adding the callbacks:
the ioeventfd will always be polled (this can change in the future to
pause/resume the processing during live snapshots or similar operations);
the ioqueue will be polled if there are outstanding requests.
I must admit I have screwed up my testing somehow, because commit
2c20e71 does not work even if cherry-picked on top of 1.4.0, and this
patch fixes it there as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
CoQueue uses a BH to awake coroutines that were made ready to run again
using qemu_co_queue_next() or qemu_co_queue_restart_all(). The BH
currently runs in the iothread AioContext and would break coroutines
that run in a different AioContext.
This is a slightly tricky problem because the lifetime of the BH exceeds
that of the CoQueue. This means coroutines can be awoken after CoQueue
itself has been freed. Also, there is no qemu_co_queue_destroy()
function which we could use to handle freeing resources.
Introducing qemu_co_queue_destroy() has a ripple effect of requiring us
to also add qemu_co_mutex_destroy() and qemu_co_rwlock_destroy(), as
well as updating all callers. Avoid doing that.
We also cannot switch from BH to GIdle function because aio_poll() does
not dispatch GIdle functions. (GIdle functions make memory management
slightly easier because they free themselves.)
Finally, I don't want to move unlock_queue and unlock_bh into
AioContext. That would break encapsulation - AioContext isn't supposed
to know about CoQueue.
This patch implements a different solution: each qemu_co_queue_next() or
qemu_co_queue_restart_all() call creates a new BH and list of coroutines
to wake up. Callers tend to invoke qemu_co_queue_next() and
qemu_co_queue_restart_all() occasionally after blocking I/O, so creating
a new BH for each call shouldn't be massively inefficient.
Note that this patch does not add an interface for specifying the
AioContext. That is left to future patches which will convert CoQueue,
CoMutex, and CoRwlock to expose AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Now that each AioContext has a ThreadPool and the main loop AioContext
can be fetched with bdrv_get_aio_context(), we can eliminate the concept
of a global thread pool from thread-pool.c.
The submit functions must take a ThreadPool* argument.
block/raw-posix.c and block/raw-win32.c use
aio_get_thread_pool(bdrv_get_aio_context(bs)) to fetch the main loop's
ThreadPool.
tests/test-thread-pool.c must be updated to reflect the new
thread_pool_submit() function prototypes.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
For now bdrv_get_aio_context() is just a stub that calls
qemu_aio_get_context() since the block layer is currently tied to the
main loop AioContext.
Add the stub now so that the block layer can begin accessing its
AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a ThreadPool to AioContext. It's possible that some
AioContext instances will never use the ThreadPool, so defer creation
until aio_get_thread_pool().
The reason why AioContext should have the ThreadPool is because the
ThreadPool is bound to a AioContext instance where the work item's
callback function is invoked. It doesn't make sense to keep the
ThreadPool pointer anywhere other than AioContext. For example,
block/raw-posix.c can get its AioContext's ThreadPool and submit work.
Special note about headers: I used struct ThreadPool in aio.h because
there is a circular dependency if aio.h includes thread-pool.h.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
ThreadPool is tied to an AioContext through its event notifier, which
dictates in which AioContext the work item's callback function will be
invoked.
In order to support multiple AioContexts we need to support multiple
ThreadPool instances.
This patch adds the new/free functions. The free function deserves
special attention because it quiesces remaining worker threads. This
requires a new condition variable and a "stopping" flag to let workers
know they should terminate once idle.
We never needed to do this before since the global threadpool was not
explicitly destroyed until process termination.
Also stash the AioContext pointer in ThreadPool so that we can call
aio_set_event_notifier() in thread_pool_free(). We didn't need to hold
onto AioContext previously since there was no free function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Move global variables into a struct so multiple thread pools can be
supported in the future.
This patch does not change thread-pool.h interfaces. There is still a
global thread pool and it is not yet possible to create/destroy
individual thread pools. Moving the variables into a struct first makes
later patches easier to review.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
It is very useful to get the main loop AioContext, which is a static
variable in main-loop.c.
I'm not sure whether qemu_get_aio_context() will be necessary in the
future once devices focus on using their own AioContext instead of the
main loop AioContext, but for now it allows us to refactor code to
support multiple AioContext while actually passing the main loop
AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
If an io_flush handler is not set, qemu_aio_wait doesn't invoke
callbacks.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using a blocking socket in the coroutine context reduces the chance of
switching to other work. This patch makes the sheepdog driver use a
non-blocking fd always.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Otherwise, live migration of the top layer will miss zero clusters and
let the backing file show through. This also matches what is done in qed.
QCOW2_CLUSTER_ZERO clusters are invalid in v2 image files. Check this
directly in qcow2_get_cluster_offset instead of replicating the test
everywhere.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We already flush when the function completes. There is no need to flush
after every compressed cluster.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The update_cluster_refcount() function increments/decrements a cluster's
refcount and then returns the new refcount value.
There is no need to flush since both update_cluster_refcount() callers
already take care of this:
1. qcow2_alloc_bytes() calls update_cluster_refcount() when compressed
sectors will be appended to an existing cluster with enough free
space. qcow2_alloc_bytes() already flushes so there is no need to do
so in update_cluster_refcount().
2. qcow2_update_snapshot_refcount() sets a cache dependency on refcounts
if it needs to update L2 entries. It also flushes before completing.
Removing this flush significantly speeds up qcow2 snapshot creation:
$ qemu-img create -f qcow2 test.qcow2 -o size=50G,preallocation=metadata
$ time qemu-img snapshot -c new test.qcow2
Time drops from more than 3 minutes to under 1 second.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Users of qcow2_update_snapshot_refcount() do not flush consistently.
qcow2_snapshot_create() flushes but qcow2_snapshot_goto() and
qcow2_snapshot_delete() do not.
Solve this by moving the bdrv_flush() into
qcow2_update_snapshot_refcount().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Compressed writes use qcow2_alloc_bytes() to allocate space with byte
granularity. The affected clusters' refcounts will be incremented but
we do not need to flush yet.
Set a L2 cache dependency on the refcount block cache, so that the
refcounts get written out before the L2 updates.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since qcow2 metadata is cached we need to flush the caches, not just the
underlying file. Use bdrv_flush(bs) instead of bdrv_flush(bs->file).
Also add the error return path when bdrv_flush() fails and move the
flush after checking for qcow2_alloc_clusters() failure so that the
qcow2_alloc_clusters() error return value takes precedence.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
update_refcount() affects the refcount cache, it does not write to disk.
Therefore bdrv_flush(bs->file) does nothing. We need to flush the
refcount cache in order to write out the refcount updates!
While we're here also add error returns when qcow2_cache_flush() fails.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2 images now accept a boolean lazy_refcounts options. Use it like
this:
-drive file=test.qcow2,lazy_refcounts=on
If the option is specified on the command line, it overrides the default
specified by the qcow2 header flags that were set when creating the
image.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Any non-default -drive options are now passed down to the block drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Pointing to a QemuOpts element is surprising and can lead to subtle
use-after-free errors when the QemuOpts is freed after all options are
parsed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds a function that adds all entries of a QDict to a QemuOpts if
the keys are known, and leaves only the rest in the QDict.
This way a single QDict of -drive options can be processed in multiple
places (generic block layer, block driver, backing file block driver,
etc.), where each part picks the options it knows. If at the end of the
process the QDict isn't empty, the user specified an invalid option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The options are passed down to the block drivers, which are supposed to
remove all options they have processed. Anything that is left over in
the end is an unknown option and results in an error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It doesn't do anything yet except storing the options QDict in the
BlockDriverState.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These functions don't exist until glib version 2.26. QEMU is currently only
mandating glib 2.12.
This patch replaces the functions with g_key_file_get/set_integer.
Unbreaks the build on Ubuntu 10.04 and RHEL 5.6.
Regression was introduced by 39097daf15
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1363323879-682-1-git-send-email-peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kraxel/chardev.5:
spice-qemu-char: Remove dead debugging code
spice-qemu-char: Fix name parameter issues after qapi-ifying
qemu-char.c: fix waiting for telnet connection message
Revert "hmp: Disable chardev-add and chardev-remove"
chardev: add udp support to qapi
chardev: add memory (ringbuf) support to qapi
chardev: add vc support to qapi
chardev: add spice support to qapi
chardev: add pipe support to qapi
chardev: add console support to qapi
chardev: switch pty init to qapi
chardev: switch parallel init to qapi
chardev: switch serial/tty init to qapi
chardev: add stdio support to qapi
chardev: switch file init to qapi
chardev: add braille support to qapi
chardev: add msmouse support to qapi
chardev: switch null init to qapi
chardev: add mux chardev support to qapi
chardev: add support for qapi-based chardev initialization
Conflicts:
ui/console.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Andreas Färber (16) and Igor Mammedov (1)
# Via Andreas Färber
* afaerber/qom-cpu:
target-lm32: Update VMStateDescription to LM32CPU
target-arm: Override do_interrupt for ARMv7-M profile
cpu: Replace do_interrupt() by CPUClass::do_interrupt method
cpu: Pass CPUState to cpu_interrupt()
exec: Pass CPUState to cpu_reset_interrupt()
cpu: Move halted and interrupt_request fields to CPUState
target-cris/helper.c: Update Coding Style
target-i386: Update VMStateDescription to X86CPU
cpu: Introduce cpu_class_set_vmsd()
cpu: Register VMStateDescription through CPUState
stubs: Add a vmstate_dummy struct for CONFIG_USER_ONLY
vmstate: Make vmstate_register() static inline
target-sh4: Move PVR/PRR/CVR into SuperHCPUClass
target-sh4: Introduce SuperHCPU subclasses
cpus: Replace open-coded CPU loop in qmp_memsave() with qemu_get_cpu()
monitor: Use qemu_get_cpu() in monitor_set_cpu()
cpu: Fix qemu_get_cpu() to return NULL if CPU not found
# By Laszlo Ersek (3) and others
# Via Michael Roth
* mdroth/qga-pull-3-11-2013:
qga: implement qmp_guest_set_vcpus() for Linux with sysfs
qga: implement qmp_guest_get_vcpus() for Linux with sysfs
qga: introduce guest-get-vcpus / guest-set-vcpus with stubs
qga: add guest-set-time command
qga: add guest-get-time command
qemu-ga: use key-value store to avoid recycling fd handles after restart
qemu-ga: make guest-sync-delimited available during fsfreeze
qemu-ga: fix confusing GAChannelMethod comparison
qga: cast to int for DWORD type
# By Peter Maydell (5) and others
# Via Riku Voipio
* riku/linux-user-for-upstream:
linux-user/syscall.c: Don't warn about unimplemented get_robust_list
linux-user: Implement accept4
linux-user: Implement sendfile and sendfile64
linux-user: make bogus negative iovec lengths fail EINVAL
linux-user: Fix layout of usage table to account for option text
linux-user: Add more sparc syscall numbers
linux-user: Support setgroups syscall with no groups
linux-user: fix futex strace of FUTEX_CLOCK_REALTIME
linux-user/syscall.c: handle FUTEX_WAIT_BITSET in do_futex
linux-user: improve print_fcntl()
linux-user: Add Alpha socket constants
Since commit d62e5f7036a018b2ad09f17ebd481bd28953d783
"chardev: add spice support to qapi"
It is impossible to set the debug parameter, so all the dprintf calls
are essentially nops. Since we've not needed the debug parameter in ages this
is not a problem, if it later turns out we do need some more debugging options
we can add more trace-points.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The strings passed in through the qapi calls are dynamic memory, since
we want to have them stick around longer then just the call to
qemu_chr_open_spice_* we need to strdup them.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
commit 01f45d986f
Author: Anthony Liguori <aliguori@us.ibm.com>
Date: Tue Mar 5 23:21:32 2013 +0530
qemu-char: move text console init to console.c
Broke vc initialization for GTK. It's a simple typo.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Current colon position in "waiting for telnet connection" message template
produces messages like:
QEMU waiting for connection on: telnet::127.0.0.16666,server
After moving a colon to the right, we will get a correct messages like:
QEMU waiting for connection on: telnet:127.0.0.1:6666,server
Signed-off-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds 'memory' support to qapi and also switches over
the memory chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
