"common" is the only file using it, so we can just include it directly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-2-kraxel@redhat.com
RDMA MAD kernel module (ibcm) disallow more than one MAD-agent for a
given MAD class.
This does not go hand-by-hand with qemu pvrdma device's requirements
where each VM is MAD agent.
Fix it by adding implementation of RDMA MAD multiplexer service which on
one hand register as a sole MAD agent with the kernel module and on the
other hand gives service to more than one VM.
Design Overview:
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
----------------
A server process is registered to UMAD framework (for this to work the
rdma_cm kernel module needs to be unloaded) and creates a unix socket to
listen to incoming request from clients.
A client process (such as QEMU) connects to this unix socket and
registers with its own GID.
TX:
----
When client needs to send rdma_cm MAD message it construct it the same
way as without this multiplexer, i.e. creates a umad packet but this
time it writes its content to the socket instead of calling umad_send().
The server, upon receiving such a message fetch local_comm_id from it so
a context for this session can be maintain and relay the message to UMAD
layer by calling umad_send().
RX:
----
The server creates a worker thread to process incoming rdma_cm MAD
messages. When an incoming message arrived (umad_recv()) the server,
depending on the message type (attr_id) looks for target client by
either searching in gid->fd table or in local_comm_id->fd table. With
the extracted fd the server relays to incoming message to the client.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
configure gets the version number from VERSION, and writes it to
config-host.mak. The make dependency for that is missing. Because of
that, a rebuild after a VERSION change may not pick up the change.
Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181214084754.23854-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Adding a new qapi module had some rather tedious repetition to
wire it into Makefile, Makefile.objs, and .gitignore (for example,
see commit bf42508f and its followup b61acdec). For make, add some
indirection by taking advantage of GNU Make string processing to
expand a list of module names into all the required artifacts, so
that future additions of a new module need only touch the list of
module names. And for gitignore, use globs to cover all generated
file names.
The list has to live in Makefile.objs, due to the way that
our unnest-vars macro slirps in that file without remembering
any definition of $(QAPI_MODULES) from Makefile.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20181116200016.2080785-1-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Difficult to make use of if not installed
Fixes: cd1bfd5ef3 ("seabios: update bios and vgabios binaries")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 153936155938.28040.11513367417790075721.stgit@gimli.home
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
elf2dmp is a converter from ELF dump (produced by 'dump-guest-memory') to
Windows MEMORY.DMP format (also know as 'Complete Memory Dump') which can be
opened in WinDbg.
This tool can help if VMCoreInfo device/driver is absent in Windows VM and
'dump-guest-memory -w' is not available but dump can be created in ELF format.
The tool works as follows:
1. Determine the system paging root looking at GS_BASE or KERNEL_GS_BASE
to locate the PRCB structure and finds the kernel CR3 nearby if QEMU CPU
state CR3 is not suitable.
2. Find an address within the kernel image by dereferencing the first
IDT entry and scans virtual memory upwards until the start of the
kernel.
3. Download a PDB matching the kernel from the Microsoft symbol store,
and figure out the layout of certain relevant structures necessary for
the dump.
4. Populate the corresponding structures in the memory image and create
the appropriate dump header.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com>
Message-Id: <1535546488-30208-3-git-send-email-viktor.prutyanov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
EDID is a metadata format to describe monitors. On physical hardware
the monitor has an eeprom with that data block which can be read over
i2c bus.
On a linux system you can usually find the EDID data block in
/sys/class/drm/$card/$connector/edid. xorg ships a edid-decode utility
which you can use to turn the blob into readable form.
I think it would be a good idea to use EDID for virtual displays too.
Needs changes in both qemu and guest kms drivers. This patch is the
first step, it adds an generator for EDID blobs to qemu. Comes with a
qemu-edid test tool included.
With EDID we can pass more information to the guest. Names and serial
numbers, so the guests display configuration has no boring "Unknown
Monitor". List of video modes. Display resolution, pretty important
in case we want add HiDPI support some day.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-2-kraxel@redhat.com
Make sure that the docs get correctly regenerated when the
file qemu-deprecated.texi has been changed.
Fixes: 44c67847e3
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit f99ce85279178385f204a52236f855c879c29cdc)
If you don't want to compile everything, you configure
config-devices.mak. And then make clean remove it, and make will
create a default one without your configuration. Fix it by not
removing it on clean target. Remove it instead on distclean.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
Remove it instead on distclean.
With the recent set of CPU hardware vulnerabilities on x86, it is
increasingly difficult to understand which CPU configurations are
good to use and what flaws they might be vulnerable to.
This doc attempts to help management applications and administrators in
picking sensible CPU configuration on x86 hosts. It outlines which of
the named CPU models are good choices, and describes which extra CPU
flags should be enabled to allow the guest to mitigate hardware flaws.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180627160103.13634-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will build a coverage report under the current directory in
reports/coverage. At the users option a report can be generated by
directly invoking something like:
make foo/bar/coverage-report.html
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This can be used to remove any stale coverage data before any
particular test run. This is useful for analysing individual tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>---
This reverts commit 208ecb3e1a. This was
causing problems by making DEF_TARGET_LIST pointless and having to
jump through hoops to build on mingw with a dully enabled config.
This includes a change to fix the per-guest TCG test probe which was
added after 208ecb3 and used TARGET_LIST.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
This commit removes the PYTHON_UTF8 workaround. The problem with setting
LC_ALL= LANG=C LC_CTYPE=en_US.UTF-8
is that the en_US.UTF-8 locale might not be available. In this case
setting above locales results in build errors even though another UTF-8
locale was originally set [1]. The only stable way of fixing the
encoding problem is by specifying the encoding in Python, like the
previous commit does.
[1] https://bugs.gentoo.org/657766
Signed-off-by: Arfrever Frehtes Taifersar Arahesis <arfrever.fta@gmail.com>
Signed-off-by: Matthias Maier <tamiko@43-1.org>
Message-Id: <20180618175958.29073-3-armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In appears the input keymap for osx was forgotten in the commit that
converted the gtk frontend to keycodemapdb. Add it.
Fixes: 2ec78706 ("ui: convert GTK and SDL1 frontends to keycodemapdb")
CC: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Message-id: 1528933916-40670-1-git-send-email-keno@juliacomputing.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit 9578f8cc3e.
The patch snuck in by accident without having been posted to
qemu-devel. It's entirely redundant: existing target print-% already
serves the purpose.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180504054241.6833-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
disable the build of binaries not needed for linux-user,
update of qemu-binfmt-conf.sh and cleanup around is_error()
-----BEGIN PGP SIGNATURE-----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=oWiH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.0-pull-request' into staging
Fixes in syscall numbers,
disable the build of binaries not needed for linux-user,
update of qemu-binfmt-conf.sh and cleanup around is_error()
# gpg: Signature made Tue 12 Jun 2018 11:57:18 BST
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-3.0-pull-request:
linux-user/sparc64: Add inotify_rm_watch and tee syscalls
linux-user/microblaze: Fix typo in accept4 syscall
linux-user/hppa: Fix typo in mknodat syscall
linux-user/alpha: Fix epoll syscalls
qemu-binfmt-conf.sh: ignore the OS/ABI field
linux-user: disable qemu-bridge-helper and socket_scm_helper build
linux-user: Use is_error() to avoid warnings and make the code clearer
linux-user: Export use is_error(), use it to avoid warnings
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
linux-user targets don't need them, and if we ask to build statically
linked binaries, some static libraries they need are not available.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180605160958.5434-1-laurent@vivier.eu>
Python 2.7 (the minimum Python version we require) provides
collections.OrderedDict on the standard library, so we don't need
to carry our own implementation.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180608175252.25110-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To be more accurate on its purpose and make code that looks for a certain
target out of this variable more readable.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This adds a separate schema file for all job-related definitions that
aren't tied to the block layer.
For a start, move the enums JobType, JobStatus and JobVerb.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Fixes 722cd74964
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180416093719.2543-1-mjt@msgid.tls.msk.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJapqaMAAoJEL/70l94x66DQoUH/Rvg+a8giz/SrEA4P8D3Cb2z
4GNbNUUoy4oU0ltD5IAMskMwpOsvl1batE0D+pKIlfO9NV4+Cj2kpgo0p9TxoYqM
VCby3wRtx27zb5nVytC6M++iIKXmeEMqXmFw61I6umddNPSl4IR3hiHEE0DM+7dV
UPIOvJeEiazyQaw3Iw+ZctNn8dDBKc/+6oxP9xRcYTaZ6hB4G9RZkqGNNSLcJkk7
R0UotdjzIZhyWMOkjIwlpTF4sWv8gsYUV4bPYKMYho5B0Obda2dBM3I1kpA8yDa/
xZ5lheOaAVBZvM5aMIcaQPa65MO9hLyXFmhMOgyfpJhLBBz6Qpa4OLLI6DeTN+0=
=UAgA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
# gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
tcg: fix cpu_io_recompile
replay: update documentation
replay: save vmstate of the asynchronous events
replay: don't process async events when warping the clock
scripts/replay-dump.py: replay log dumper
replay: avoid recursive call of checkpoints
replay: check return values of fwrite
replay: push replay_mutex_lock up the call tree
replay: don't destroy mutex at exit
replay: make locking visible outside replay code
replay/replay-internal.c: track holding of replay_lock
replay/replay.c: bump REPLAY_VERSION again
replay: save prior value of the host clock
replay: added replay log format description
replay: fix save/load vm for non-empty queue
replay: fixed replay_enable_events
replay: fix processing async events
cpu-exec: fix exception_index handling
hw/i386/pc: Factor out the superio code
hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/i386-softmmu.mak
# default-configs/x86_64-softmmu.mak
SeaBIOS blob which is currently shipped with QEMU
doesn't need acpi-dsdt.aml nor is able to use it
and code that loaded it in QEMU was removed by
(commit 9fb7aaaf4c "pc: drop external DSDT loading")
in 2013.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since commit 67a1de0d19 there is no space anymore between the
version number and the parentheses when running configure with
--with-pkgversion=foo :
$ qemu-system-s390x --version
QEMU emulator version 2.11.50(foo)
But the space is included when building without that option
when building from a git checkout:
$ qemu-system-s390x --version
QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty)
The same confusion exists with the "query-version" QMP command.
Let's fix this by introducing a proper QEMU_FULL_VERSION definition
that includes the space and parentheses, while the QEMU_PKGVERSION
should just cleanly contain the package version string itself.
Note that this also changes the behavior of the "query-version" QMP
command (the space and parentheses are not included there anymore),
but that's supposed to be OK since the strings there are not meant
to be parsed by other tools.
Fixes: 67a1de0d19
Buglink: https://bugs.launchpad.net/qemu/+bug/1673373
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Available when configure --enable-modules.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180306161728.20890-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add audio/ to common-obj-m variable.
Also run both audio and ui variables through unnest-vars.
This avoids sdl.mo (exists in both audio/ and ui/) name clashes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306074053.22856-4-kraxel@redhat.com
Now that gtk support builds as a module, CONFIG_GTK changed from
y to m. Adjust Makefile correspondingly.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Message-id: 20180307155517.32570-1-brogers@suse.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC.
This is not a complete implementation yet with a lot of components
still missing but enough for the U-Boot firmware to start and to boot
a Linux kernel or AROS.
Signed-off-by: François Revol <revol@free.fr>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We used to generate first test and later QGA QAPI code into
qapi-generated/. Commit b93b63f574 moved the test code to tests/.
Commit 54c2e50205 moved the QGA code to qga/qapi-generated/. The
directory has been unused since.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-30-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Our qapi-schema.json is composed of modules connected by include
directives, but the generated code is monolithic all the same: one
qapi-types.h with all the types, one qapi-visit.h with all the
visitors, and so forth. These monolithic headers get included all
over the place. In my "build everything" tree, adding a QAPI type
recompiles about 4800 out of 5100 objects.
We wouldn't write such monolithic headers by hand. It stands to
reason that we shouldn't generate them, either.
Split up generated qapi-types.h to mirror the schema's modular
structure: one header per module. Name the main module's header
qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h.
Mirror the schema's includes in the headers, so that qapi-types.h gets
you everything exactly as before. If you need less, you can include
one or more of the sub-module headers. To be exploited shortly.
Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h,
qmp-commands.c, qapi-event.h, qapi-event.c the same way.
qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic.
The split of qmp-commands.c duplicates static helper function
qmp_marshal_output_str() in qapi-commands-char.c and
qapi-commands-misc.c. This happens when commands returning the same
type occur in multiple modules. Not worth avoiding.
Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and
qmp-commands.[ch] to qapi-commands.[ch], name the shards that way
already, to reduce churn. This requires temporary hacks in
commands.py and events.py. Similarly, c_name() must temporarily
be taught to munge '/' in common.py. They'll go away with the rename.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-23-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: declare a dummy variable in each .c file, to shut up OSX
toolchain warnings about empty .o files, including hacking c_name()]
Signed-off-by: Eric Blake <eblake@redhat.com>
Linking code from multiple separate QAPI schemata into the same
program is possible, but involves some weirdness around built-in
types:
* We generate code for built-in types into .c only with option
--builtins. The user is responsible for generating code for exactly
one QAPI schema per program with --builtins.
* We generate code for built-in types into .h regardless of
--builtins, but guarded by #ifndef QAPI_VISIT_BUILTIN. Because all
copies of this code are exactly the same, including any combination
of these headers works.
Replace this contraption by something more conventional: generate code
for built-in types into their very own files: qapi-builtin-types.c,
qapi-builtin-visit.c, qapi-builtin-types.h, qapi-builtin-visit.h, but
only with --builtins. Obey --output-dir, but ignore --prefix for
them.
Make qapi-types.h include qapi-builtin-types.h. With multiple
schemata you now have multiple qapi-types.[ch], but only one
qapi-builtin-types.[ch]. Same for qapi-visit.[ch] and
qapi-builtin-visit.[ch].
Bonus: if all you need is built-in stuff, you can include a much
smaller header. To be exploited shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-21-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: fix octal constant for python 3]
Signed-off-by: Eric Blake <eblake@redhat.com>
All generated .c are named like their .h, except for qmp-marshal.c and
qmp-commands.h. To add to the confusion, tests-qmp-commands.c falsely
matches generated test-qmp-commands.h.
Get rid of this unnecessary complication.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-19-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Whenever qapi-schema.json changes, we run six programs eleven times to
update eleven files. Similar for qga/qapi-schema.json. This is
silly. Replace the six programs by a single program that spits out
all eleven files.
The programs become modules in new Python package qapi, along with the
helper library. This requires moving them to scripts/qapi/. While
moving them, consistently drop executable mode bits.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180211093607.27351-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: move change to one-line 'blurb' earlier in series, mention mode
bit change as intentional, update qapi-code-gen.txt to match actual
generated events.c file]
Signed-off-by: Eric Blake <eblake@redhat.com>
sed's -E option may not be supported by older distros. As there's no
point using sed here at all, use just shell mechanisms to establish the
variable values, starting from the stem instead of the full target.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The make rules for building QEMU are mostly silent by default. They can
be made verbose by setting the variable V=1. The default state does not
however correspond to a V=0 setting - $(V) must be undefined / empty to
get the default quiet build.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180123164718.12714-3-berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 42a77f1ce4.
The primary intention of this change was to silence messages
like
make[1]: '/home/berrange/src/virt/qemu/capstone/libcapstone.a' is up to date.
which we get when calling make recursively with explicit
targets.
The problem is that this change affected every make target,
not merely the targets that triggered these "is up to date"
messages. As a result any targets that were not invoking
commands via "$(call quiet-command ...)" suddenly become
silent. This is particularly bad for "make install" which
now appears todo nothing.
Rather than go through every make rule and try to identify
places where we now need to explicitly print a message to
show work taking place, just revert the change.
To address the original problem of silencing "is up to date"
messages, we simply add --quiet to the SUBDIR_MAKEVARS
variable, so it only affects us on recursive make calls.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180123164718.12714-2-berrange@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Python2 did not validate locale correctness when reading input data, so
would happily read UTF-8 data in non-UTF-8 locales. Python3 is strict so
if you try to read UTF-8 data in the C locale, it will raise an error
for any UTF-8 bytes that aren't representable in 7-bit ascii encoding.
e.g.
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 54: ordinal not in range(128)
Traceback (most recent call last):
File "/tmp/qemu-test/src/scripts/qapi-commands.py", line 317, in <module>
schema = QAPISchema(input_file)
File "/tmp/qemu-test/src/scripts/qapi.py", line 1468, in __init__
parser = QAPISchemaParser(open(fname, 'r'))
File "/tmp/qemu-test/src/scripts/qapi.py", line 301, in __init__
previously_included)
File "/tmp/qemu-test/src/scripts/qapi.py", line 348, in _include
exprs_include = QAPISchemaParser(fobj, previously_included, info)
File "/tmp/qemu-test/src/scripts/qapi.py", line 271, in __init__
self.src = fp.read()
File "/usr/lib64/python3.5/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
More background on this can be seen in
https://www.python.org/dev/peps/pep-0538/
Many distros support a new C.UTF-8 locale that is like the C locale,
but with UTF-8 instead of 7-bit ASCII. That is not entirely portable
though. This patch thus sets the LANG to "C", but overrides LC_CTYPE
to be en_US.UTF-8 locale. This gets us pretty close to C.UTF-8, but
in a way that should be portable to everywhere QEMU builds.
This patch only forces UTF-8 for QAPI scripts, since that is the one
showing the immediate error under Python3 with C locale, but potentially
we ought to force this for all python scripts used in the build process.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180116134217.8725-9-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The qcode-to-linux keymaps was accidentally added in the wrong place
by
commit de80d78594
Author: Owen Smith <owen.smith@citrix.com>
Date: Fri Nov 3 11:56:28 2017 +0000
ui: generate qcode to linux mappings
breaking the alphabetical ordering of keymaps
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180117164118.8510-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the qcode_to_keycode table with automatically
generated tables.
Missing entries in qcode_to_keycode now fixed:
- Q_KEY_CODE_KP_COMMA -> 0x2d
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the qcode_to_keycode_set1, qcode_to_keycode_set2,
and qcode_to_keycode_set3 tables with automatically
generated tables.
Missing entries in qcode_to_keycode_set1 now fixed:
- Q_KEY_CODE_SYSRQ -> 0x54
- Q_KEY_CODE_PRINT -> 0x54 (NB ignored due to special case)
- Q_KEY_CODE_AGAIN -> 0xe005
- Q_KEY_CODE_PROPS -> 0xe006
- Q_KEY_CODE_UNDO -> 0xe007
- Q_KEY_CODE_FRONT -> 0xe00c
- Q_KEY_CODE_COPY -> 0xe078
- Q_KEY_CODE_OPEN -> 0x64
- Q_KEY_CODE_PASTE -> 0x65
- Q_KEY_CODE_CUT -> 0xe03c
- Q_KEY_CODE_LF -> 0x5b
- Q_KEY_CODE_HELP -> 0xe075
- Q_KEY_CODE_COMPOSE -> 0xe05d
- Q_KEY_CODE_PAUSE -> 0xe046
- Q_KEY_CODE_KP_EQUALS -> 0x59
And some mistakes corrected:
- Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana)
instead of of 0x77 (Hirigana)
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xe05d) and is now mapped to 0xe01e
- Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead
of to 0xe041 (Find)
- Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0
as the prefix
Missing entries in qcode_to_keycode_set2 now fixed:
- Q_KEY_CODE_PRINT -> 0x7f (NB ignored due to special case)
- Q_KEY_CODE_COMPOSE -> 0xe02f
- Q_KEY_CODE_PAUSE -> 0xe077
- Q_KEY_CODE_KP_EQUALS -> 0x0f
And some mistakes corrected:
- Q_KEY_CODE_HIRAGANA was mapped to 0x13 (Katakanahiragana)
instead of of 0x62 (Hirigana)
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xe02f) and is now not mapped
- Q_KEY_CODE_FIND was mapped to 0xe010 (Search) and is now
not mapped.
- Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0
as the prefix
Missing entries in qcode_to_keycode_set3 now fixed:
- Q_KEY_CODE_ASTERISK -> 0x7e
- Q_KEY_CODE_SYSRQ -> 0x57
- Q_KEY_CODE_LESS -> 0x13
- Q_KEY_CODE_STOP -> 0x0a
- Q_KEY_CODE_AGAIN -> 0x0b
- Q_KEY_CODE_PROPS -> 0x0c
- Q_KEY_CODE_UNDO -> 0x10
- Q_KEY_CODE_COPY -> 0x18
- Q_KEY_CODE_OPEN -> 0x20
- Q_KEY_CODE_PASTE -> 0x28
- Q_KEY_CODE_FIND -> 0x30
- Q_KEY_CODE_CUT -> 0x38
- Q_KEY_CODE_HELP -> 0x09
- Q_KEY_CODE_COMPOSE -> 0x8d
- Q_KEY_CODE_AUDIONEXT -> 0x93
- Q_KEY_CODE_AUDIOPREV -> 0x94
- Q_KEY_CODE_AUDIOSTOP -> 0x98
- Q_KEY_CODE_AUDIOMUTE -> 0x9c
- Q_KEY_CODE_VOLUMEUP -> 0x95
- Q_KEY_CODE_VOLUMEDOWN -> 0x9d
- Q_KEY_CODE_CALCULATOR -> 0xa3
- Q_KEY_CODE_AC_HOME -> 0x97
And some mistakes corrected:
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0x8d) and is now 0x91
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The x_keycode_to_pc_keycode and evdev_keycode_to_pc_keycode
tables are replaced with automatically generated tables.
In addition the X11 heuristics are improved to detect running
on XQuartz and XWin X11 servers, to activate the correct OS-X
and Win32 keycode maps.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164717.15855-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This commit introduces a vhost-user-blk backend device, it uses UNIX
domain socket to communicate with QEMU. The vhost-user-blk sample
application should be used with QEMU vhost-user-blk-pci device.
To use it, complie with:
make vhost-user-blk
and start like this:
vhost-user-blk -b /dev/sdb -s /path/vhost.socket
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move generic make flags in MAKEFLAGS (SUBDIR_MAKEFLAGS is more qemu specific).
Use --quiet to silence make 'is up to date' message.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180104160523.22995-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These targets don't need a full build of git submodules.
(See b8e535ae8a and eaa2ddbb76).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For some systems (i.e. FreeBSD) the default 'make' is not compatible with the
GNU extensions used by QEMU makefiles.
Calling the GNU make (gmake) works, however the help displayed refers to the
host 'make' and copy/paste leads to lot of unobvious errors:
$ gmake check-help
[...]
make check Run all tests
$ make check
make: "Makefile" line 28: Missing dependency operator
make: "Makefile" line 37: Need an operator
make: "Makefile" line 41: warning: duplicate script for target "git-submodule-update" ignored
make: "rules.mak" line 70: warning: duplicate script for target "%.o" ignored
make: Unknown modifier ' '
make: Unclosed substitution for eval modules (= missing)
make: "tests/Makefile.include" line 24: Variable/Value missing from "export"
make: "tests/" line 1: warning: Zero byte read from file, skipping rest of line.
make: "tests/" line 1: Need an operator
make: "Makefile" line 660: warning: duplicate script for target "ifneq" ignored
make: "Makefile" line 78: warning: using previous script for "ifneq" defined here
make: Fatal errors encountered -- cannot continue
Using the $(MAKE) variable, the help displayed is consistent with the 'make'
program used.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use keycodedb to generate a qcode to linux mapping
Signed-off-by: Owen Smith <owen.smith@citrix.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Developers sometimes mistakenly run 'make test' instead of 'make check'.
'make test' triggers the ancient, unmaintained tcg unit tests in
tests/tcg/Makefile which have long since ceased compiling.
Even if someone fixes the TCG tests, it makes little sense to put
them in a 'make test' target, rather they should be 'make check-tcg',
possibly wired up as a dependency of 'make check'.
In the meantime, this patch disarms the 'make test' trap by simply
deleting it so users get an immediate error. This should be enough
for them to remember to type 'make check' instead (or 'make help'
to learn). It also deletes 'make speed' which is another route
into the tcg tests.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Message-id: 20171121142538.22072-1-berrange@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using obscure black magic introduced in eaa2ddbb76 :)
In an out-of-tree directory, running "../configure && make help" will generate
some required files (.mak), then clone some submodules, compile at least
the capstone submodule, generate QMP and Trace files, and finally display
the help.
On an outdated computer (Sun Blade workstation), running "make help" took
more than 5h :) With this patch it took roughly 37min.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20171108032052.20029-1-f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cross compiling QEMU for Windows we need to specify the cross
version of ranlib to avoid build errors when building capstone. This
patch ensures we use the same cross prefix on ranlib as other toolchain
components.
- Fedora23 mingw
- RHEL-7.2 with mingw packages from epel:
LINK qemu-img.exe
build-win64/capstone/capstone.lib: error adding symbols: Archive has no
index; run ranlib to add one
collect2: error: ld returned 1 exit status
$ x86_64-w64-mingw32-ar --version
GNU ar (GNU Binutils) 2.25
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <e457d4e906dceea4de6c3431813a06b137c1ab9c.1510103351.git.alistair.francis@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The Makefile attempts to optimize the handling of submodules by using MAKELEVEL
to only check the submodule status when running from the top level make
invokation. This causes problems for people who are using a makefile of their
own to in turn invoke QEMU's makefile, as MAKELEVEL is already set to 1 (or
more) when QEMU's makefile runs.
This optimization should not really be needed, since the git-submodule.sh
script is already used to detect if a submodule update is required. This by
removing the MAKELEVEL check, we at most add an extra 'git-submodule.sh status'
call to each make level, the overhead of which is lost in noise of building
QEMU.
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some people building QEMU use VPATH builds where the source directory is on a
read-only volume. In such a case 'scripts/git-submodules.sh update' will always
fail and users are required to run it manually themselves on their original
writable source directory.
While this is already supported, it is nice to give users a command line flag
to configure to permanently disable automatic submodule updates, as it means
they won't get hard to diagnose failures from git-submodules.sh at an arbitrary
later date.
This patch thus introduces a flag '--disable-git-update' which will prevent
'make' from ever running 'scripts/git-submodules.sh update'. It will still run
the 'status' command to determine if a submodule update is needed, but when it
does this it'll simply stop and print a message instructing the developer what
todo. eg
$ ./configure --target-list=x86_64-softmmu --disable-git-update
...snip...
$ make
GEN config-host.h
GEN trace/generated-tcg-tracers.h
GEN trace/generated-helpers-wrappers.h
GEN trace/generated-helpers.h
GEN trace/generated-helpers.c
GEN module_block.h
GIT submodule checkout is out of date. Please run
scripts/git-submodule.sh update ui/keycodemapdb
from the source directory checkout /home/berrange/src/virt/qemu
make: *** [Makefile:31: git-submodule-update] Error 1
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some users can't run a bare 'git' command, due to need for a transparent
proxying solution such as 'tsocks'. This adds an argument to configure to
let users specify such a thing:
./configure --with-git="tsocks git"
The submodule script is also updated to give the user a hint about using this
flag, if we fail to checkout modules.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Do not require the submodule, but use it if present. Allow the
command-line to override system or git submodule either way.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This was introduced by:
commit aef45d51d1
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Fri Sep 29 11:11:56 2017 +0100
build: automatically handle GIT submodule checkout for dtc
On my system, I see the following with a fresh clone:
% ./configure --disable-gtk --target-list=aarch64-softmmu
% make -j8
GEN aarch64-softmmu/config-devices.mak.tmp
GEN config-host.h
mkdir -p dtc/libfdt
GIT ui/keycodemapdb dtc
mkdir -p dtc/tests
GEN qemu-options.def
[snip]
GEN migration/trace.h
make: *** [git-submodule-update] Error 1
make: *** Waiting for unfinished jobs....
Upon closer inspection, the root cause of the error is:
% git submodule update --init ui/keycodemapdb dtc
fatal: destination path 'dtc' already exists and is not an empty directory.
Clone of 'git://git.qemu-project.org/dtc.git' into submodule path 'dtc' failed
This patch fixes this race condition by forcing the 'dtc/%' rule which caused
'dtc' to be non-empty to wait on '.git-submodule-status'.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1508352023-28591-1-git-send-email-alindsay@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add vertex shader which flips the texture upside down while blitting it.
Add argument to qemu_gl_run_texture_blit() to enable flipping.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010135453.6704-4-kraxel@redhat.com
With the upcoming dmabuf support in qemu there will be more users of the
shaders than just console-gl.c. So rename ConsoleGLState to
QemuGLShader, rename some functions too, move code from console-gl.c to
shaders.c.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010135453.6704-3-kraxel@redhat.com
qemu-keymap generates qemu reverse keymaps from xkb keymaps,
which can be used with the qemu "-k" command line switch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171005153330.19210-2-kraxel@redhat.com
Replace the number_to_qcode, qcode_to_number and linux_to_qcode
tables with automatically generated tables.
Missing entries in linux_to_qcode now fixed:
KEY_LINEFEED -> Q_KEY_CODE_LF
KEY_KPEQUAL -> Q_KEY_CODE_KP_EQUALS
KEY_COMPOSE -> Q_KEY_CODE_COMPOSE
KEY_AGAIN -> Q_KEY_CODE_AGAIN
KEY_PROPS -> Q_KEY_CODE_PROPS
KEY_UNDO -> Q_KEY_CODE_UNDO
KEY_FRONT -> Q_KEY_CODE_FRONT
KEY_COPY -> Q_KEY_CODE_COPY
KEY_OPEN -> Q_KEY_CODE_OPEN
KEY_PASTE -> Q_KEY_CODE_PASTE
KEY_CUT -> Q_KEY_CODE_CUT
KEY_HELP -> Q_KEY_CODE_HELP
KEY_MEDIA -> Q_KEY_CODE_MEDIASELECT
In addition, some fixes:
- KEY_PLAYPAUSE now maps to Q_KEY_CODE_AUDIOPLAY, instead of
KEY_PLAYCD. KEY_PLAYPAUSE is defined across almost all scancodes
sets, while KEY_PLAYCD only appears in AT set1, so the former is
a more useful mapping.
Missing entries in qcode_to_number now fixed:
Q_KEY_CODE_AGAIN -> 0x85
Q_KEY_CODE_PROPS -> 0x86
Q_KEY_CODE_UNDO -> 0x87
Q_KEY_CODE_FRONT -> 0x8c
Q_KEY_CODE_COPY -> 0xf8
Q_KEY_CODE_OPEN -> 0x64
Q_KEY_CODE_PASTE -> 0x65
Q_KEY_CODE_CUT -> 0xbc
Q_KEY_CODE_LF -> 0x5b
Q_KEY_CODE_HELP -> 0xf5
Q_KEY_CODE_COMPOSE -> 0xdd
Q_KEY_CODE_KP_EQUALS -> 0x59
Q_KEY_CODE_MEDIASELECT -> 0xed
In addition, some fixes:
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xdd) and is now mapped to 0x9e
- Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead
of to 0xe041 (Find)
- Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana)
instead of of 0x77 (Hirigana)
- Q_KEY_CODE_PRINT was mapped to 0xb7 which is not a defined
scan code in AT set 1, it is now mapped to 0x54 (sysrq)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The https://gitlab.com/keycodemap/keycodemapdb/ repo contains a
data file mapping between all the different scancode/keycode/keysym
sets that are known, and a tool to auto-generate lookup tables for
different combinations.
It is used by GTK-VNC, SPICE-GTK and libvirt for mapping keys.
Using it in QEMU will let us replace many hand written lookup
tables with auto-generated tables from a master data source,
reducing bugs. Adding new QKeyCodes will now only require the
master table to be updated, all ~20 other tables will be
automatically updated to follow.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-4-berrange@redhat.com
[ kraxel: fix build ]
[ kraxel: switch repo to qemu.git mirror ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently if DTC is required by configure and not available in the host
OS install, we exit with an error message telling the user to checkout a
git submodule or install the library.
This introduces automatic handling of the git submodule checkout process
and enables it for dtc. This only runs if building from GIT, so users of
release tarballs still need the system library install. The current state
of the git checkout is stashed in .git-submodule-status, and a helper
program is used to determine if this state matches the desired submodule
state. A dependency against 'Makefile' ensures that the submodule state
is refreshed at the start of the build process
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-2-berrange@redhat.com
[ kraxel: use /bin/sh not bash for scripts/git-submodule.sh ]
[ kraxel: fix Makefile dependencies ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
[fixup] Makefile dep
And actually link to it from vhost-user-bridge.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Block driver documentation is available in qemu-doc.html. It would be
convenient to have documentation for formats, protocols, and filter
drivers in a man page.
Extract the relevant part of qemu-doc.html into a new file called
docs/qemu-block-drivers.texi. This file can also be built as a
stand-alone document (man, html, etc).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Proper support of persistent reservation for multipath devices requires
communication with the multipath daemon, so that the reservation is
registered and applied when a path comes up. The device mapper
utilities provide a library to do so; this patch makes qemu-pr-helper.c
detect multipath devices and, when one is found, delegate the operation
to libmpathpersist.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a privileged helper to run persistent reservation commands.
This lets virtual machines send persistent reservations without using
CAP_SYS_RAWIO or out-of-tree patches. The helper uses Unix permissions
and SCM_RIGHTS to restrict access to processes that can access its socket
and prove that they have an open file descriptor for a raw SCSI device.
The next patch will also correct the usage of persistent reservations
with multipath devices.
It would also be possible to support for Linux's IOC_PR_* ioctls in
the future, to support NVMe devices. For now, however, only SCSI is
supported.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using two libraries (libqemuutil.a and libqemustub.a) would sometimes
result in circular dependencies. To avoid these issues let's just
combine both into a single library that functions as both.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <54e6458745493d10901964624479a7d9a872f481.1503077821.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop pixman submodule and support for the "internal" pixman build.
pixman should be reasonably well established meanwhile so we don't
need the fallback submodule any more. While being at it also drop
some #ifdefs for pixman versions older than what we require in
configure anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170905140116.28181-2-kraxel@redhat.com
Sadly, we don't have a TPM maintainer, not even a MAINTAINERS entry.
Create one, and mark it orphaned.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-12-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-10-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-8-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Currently if you do "make check-help" in a fresh checkout, only an error
is printed which is not nice:
$ make check-help V=1
cc -nostdlib -o check-help.mo
cc: fatal error: no input files
compilation terminated.
rules.mak:115: recipe for target 'check-help.mo' failed
make: *** [check-help.mo] Error 1
Move the config-host.mak condition into the body of
tests/Makefile.include and always include the rule for check-help.
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170810085025.14076-1-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
It got moved in qga/main.c from commit 2870dc3456.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Don't try to build the ivshmem-server and ivshmem-client tools unless
CONFIG_IVSHMEM is set.
This fixes in passing a build bug on NetBSD, which fails to build the
ivshmem tools because they use shm_open() and on NetBSD that requires
linking against -lrt.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500021225-4118-4-git-send-email-peter.maydell@linaro.org
[PMM: moved some code into earlier patches; minor bugfixes;
added commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's already possible to do a network boot of an s390x guest with an
external netboot image based on a Linux installation, but it would
be much more convenient if the s390-ccw firmware supported network
booting right out of the box, without the need to assemble such an
external image first.
This is an s390-netboot.img that can be used for network booting.
You can download a combined kernel + initrd image via TFTP
by starting QEMU for example with:
qemu-system-s390x ... -device virtio-net,netdev=n1,bootindex=1 \
-netdev user,id=n1,tftp=/path/to/tftp,bootfile=kernel.img
Note that this version does not support downloading via config
files (i.e. pxelinux config files or .INS config files) yet. This
will be added later.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This commit introduces a vhost-user-scsi backend sample application. It
must be linked with libiscsi and libvhost-user.
To use it, compile with:
$ make vhost-user-scsi
And run as follows:
$ ./vhost-user-scsi -u vus.sock -i iscsi://uri_to_target/
$ qemu-system-x86_64 --enable-kvm -m 512 \
-object memory-backend-file,id=mem,size=512m,share=on,mem-path=guestmem \
-numa node,memdev=mem \
-chardev socket,id=vhost-user-scsi,path=vus.sock \
-device vhost-user-scsi-pci,chardev=vhost-user-scsi \
The application is currently limited at one LUN only and it processes
requests synchronously (therefore only achieving QD1). The purpose of
the code is to show how a backend can be implemented and to test the
vhost-user-scsi Qemu implementation.
If a different instance of this vhost-user-scsi application is executed
at a remote host, a VM can be live migrated to such a host.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Message-Id: <1488479153-21203-5-git-send-email-felipe@nutanix.com>
