vmware-vmx-version is a number returned from CMD_GETVERSION which specifies
to guest VMware Tools the the host VMX version. If the host reports a number
that is different than what the guest VMware Tools expects, it may force
guest to upgrade VMware Tools. (See comment above VERSION_MAGIC and
VmCheck_IsVirtualWorld() function in open-vm-tools open-source code).
For better readability and allow maintaining compatability for guests
which may expect different vmware-vmx-version, make vmware-vmx-version a
VMPort object property. This would allow user to control it's value via
"-global vmport.vmware-vmx-version=X".
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200312165431.82118-6-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is used as a signal for VMware Tools to know if a command it
attempted to invoke, failed or is unsupported. As a result, VMware Tools
will either report failure to user or fallback to another backdoor command
in attempt to perform some operation.
A few examples:
* open-vm-tools TimeSyncReadHost() function fallbacks to
CMD_GETTIMEFULL command when CMD_GETTIMEFULL_WITH_LAG
fails/unsupported.
* open-vm-tools Hostinfo_NestingSupported() function verifies
EAX != -1 to check for success.
* open-vm-tools Hostinfo_VCPUInfoBackdoor() functions checks
if reserved-bit is set to indicate command is unimplemented.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200312165431.82118-5-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmport_ioport_read() returns the value that should propagate to vCPU EAX
register when guest reads VMPort IOPort (i.e. By x86 IN instruction).
However, because vmport_ioport_read() calls cpu_synchronize_state(), the
returned value gets overridden by the value in QEMU vCPU EAX register.
i.e. cpu->env.regs[R_EAX].
To fix this issue, change vmport_ioport_read() to explicitly override
cpu->env.regs[R_EAX] with the value it wish to propagate to vCPU EAX
register.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200312165431.82118-4-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No functional change.
This is done as a preparation for the following patches that will
introduce several device properties.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200312165431.82118-3-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This official VMware open-source project can be used as reference to
understand how guest code interacts with VMPort virtual device. Thus,
providing understanding on how device is expected to behave.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200312165431.82118-2-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Detected by asm test suite failures in dav1d
(https://code.videolan.org/videolan/dav1d). Can be reproduced by
`qemu-x86_64 -cpu core2duo ./tests/checkasm --test=mc_8bpc 1659890620`.
Signed-off-by: Janne Grunau <j@jannau.net>
Message-Id: <20200401225253.30745-1-j@jannau.net>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID leaf CPUID_Fn80000008_ECX provides information about the
number of threads supported by the processor. It was found that
the field ApicIdSize(bits 15-12) was not set correctly.
ApicIdSize is defined as the number of bits required to represent
all the ApicId values within a package.
Valid Values: Value Description
3h-0h Reserved.
4h up to 16 threads.
5h up to 32 threads.
6h up to 64 threads.
7h up to 128 threads.
Fh-8h Reserved.
Fix the bit appropriately.
This came up during following thread.
https://lore.kernel.org/qemu-devel/158643709116.17430.15995069125716778943.malonedeb@wampee.canonical.com/#t
Refer the Processor Programming Reference (PPR) for AMD Family 17h
Model 01h, Revision B1 Processors. The documentation is available
from the bugzilla Link below.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Reported-by: Philipp Eppelt <1871842@bugs.launchpad.net>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <20200417215345.64800.73351.stgit@localhost.localdomain>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This can be allow to include controller-specific data while
saving/loading in-flight scsi requests of the vmbus scsi controller.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424123444.3481728-7-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guest OS uses ACPI to discover VMBus presence. Add a corresponding
entry to DSDT in case VMBus has been enabled.
Experimentally Windows guests were found to require this entry to
include two IRQ resources. They seem to never be used but they still
have to be there.
Make IRQ numbers user-configurable via corresponding properties; use 7
and 13 by default.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424123444.3481728-6-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As vmbus-bridge is derived from sysbus device, it has to be whitelisted
to be allowed to be created with -device.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424123444.3481728-5-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the VMBus infrastructure -- bus, devices, root bridge, vmbus state
machine, vmbus channel interactions, etc.
VMBus is a collection of technologies. At its lowest layer, it's a message
passing and signaling mechanism, allowing efficient passing of messages to and
from guest VMs. A layer higher, it's a mechanism for defining channels of
communication, where each channel is tagged with a type (which implies a
protocol) and a instance ID. A layer higher than that, it's a bus driver,
serving as the basis of device enumeration within a VM, where a channel can
optionally be exposed as a paravirtual device. When a server-side (paravirtual
back-end) component wishes to offer a channel to a guest VM, it does so by
specifying a channel type, a mode, and an instance ID. VMBus then exposes this
in the guest.
More information about VMBus can be found in the file
vmbuskernelmodeclientlibapi.h in Microsoft's WDK.
TODO:
- split into smaller palatable pieces
- more comments
- check and handle corner cases
Kudos to Evgeny Yakovlev (formerly eyakovlev@virtuozzo.com) and Andrey
Smetatin (formerly asmetanin@virtuozzo.com) for research and
prototyping.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424123444.3481728-4-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a header with data structures and constants used in Hyper-V VMBus
hypervisor <-> guest interactions.
Based on the respective stuff from Linux kernel.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424123444.3481728-3-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need "qom/object.h" to call object_ref()/object_unref(),
and to test the TYPE_DUMMY.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200504115656.6045-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We use the Object type all over the place.
Forward declare it in "qemu/typedefs.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200504115656.6045-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When recursing, the return value of do_object_child_foreach() is not
taken into account.
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Fixes: d714b8de77 ("qom: Add recursive version of object_child_for_each")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200404153340.164861-1-clg@kaod.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes shift=auto when record/replay is enabled.
Now user does not need to guess the best shift value.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
--
v2:
moved icount_time_shift to vmstate subsection
Message-Id: <158988500050.15192.692077802469400393.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Options -M memory-backend and -numa memdev are mutually exclusive,
and if used together, it might lead to a crash in the worst case.
For example when the same backend is used with these options together:
-m 4G \
-object memory-backend-ram,id=mem0,size=4G \
-M pc,memory-backend=mem0 \
-numa node,memdev=mem0
QEMU will abort with:
exec.c:2006: qemu_ram_set_idstr: Assertion `!new_block->idstr[0]' failed.
and following backtrace:
abort ()
qemu_ram_set_idstr ()
vmstate_register_ram ()
vmstate_register_ram_global ()
machine_consume_memdev ()
numa_init_memdev_container ()
numa_complete_configuration ()
machine_run_board_init ()
add a check to error out in case the user tries to use both options at
the same time.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200511141103.43768-3-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Default RAM backend depends on numa_uses_legacy_mem(), which is
infulenced by -numa options on CLI or set-numa-node QMP command
at preconfig time. If QEMU is started with '-preconfig'
without -numa, it will lead to creating default RAM backend
even if later set-numa-node is used to assing RAM to NUMA nodes
using 'memdev' NUMA option.
That at best will waste RAM object created by default and with
next patch adding a check to prevent usage of conflicting
'-M memory-backend' and '-numa memdev'
options, it will make QEMU error out if user tries to configure
NUMA at preconfig time with memdev option, making set-numa-node
unusable.
To fix issue, move preconfig loop before default RAM backend is
created, so that numa_uses_legacy_mem() would take into account
effects of set-numa-node commands executed at preconfig time.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200511141103.43768-2-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just build the container when run-coverity-scan is invoked with
--update-tools-only --docker. This requires moving the "docker build"
logic into the update_coverity_tools function.
The only snag is that --update-tools-only --docker requires access to
the dockerfile. For now just report an error for --src-tarball, and
"docker build" will fail if not in a source tree. Another possibility
could be to host our container images on a public registry, and use
"FROM qemu:fedora" to make the Dockerfile small enough that it can be
included directly in the run-coverity-scan script.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This lets us look at coverity_tool.md5 across executions of run-coverity-scan
and skip the download.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tools are already updated via the docker build.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide a quick way to skip building the container while we figure out how
to get caching right.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Our trusted docker wrapper allows run-coverity-scan to run with both
docker and podman.
For the "run" phase this is transparent; for the "build" phase however
scripts are replaced with a bind mount (-v). This is not an issue
because the secret option is meant for secrets stored globally in the
system and bind mounts are a valid substitute for secrets that are known
to whoever builds the container.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Support a [coverity] section in .git/config. It can be used to retrieve the
token and also, if it is different from user.email, the username of the
submitter.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Read the --extra-files in binary mode to avoid encoding errors.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The docker.py command line is subtly different from docker and podman's,
in that the tag and Dockerfile are passed via positional arguments.
Remove this gratuitous difference and just parse -f and -t.
-f was previously used by --extra-files, only keep the long option.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We define DEBUG_PCALL since b884fc5e (2012-10-06).
7.5 years later it is safe to assume we can remove it :)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-7-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-6-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-5-f4bug@amsat.org>
The Plug & Play region of the AHB/APB bridge can be accessed
by various word size, however the implementation is clearly
restricted to 32-bit:
static uint64_t grlib_ahb_pnp_read(void *opaque, hwaddr offset, unsigned size)
{
AHBPnp *ahb_pnp = GRLIB_AHB_PNP(opaque);
return ahb_pnp->regs[offset >> 2];
}
Similarly to commit 0fbe394a64 with the APB PnP registers,
set the MemoryRegionOps::impl min/max fields to 32-bit, so
memory.c::access_with_adjusted_size() can adjust when the
access is not 32-bit.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-4-f4bug@amsat.org>
NIAGARA_UART_BASE is already defined few lines earlier.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200608172144.20461-3-f4bug@amsat.org>
The UART is present on the machine regardless there is a
character device connected to it. Map it unconditionally.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200608172144.20461-4-f4bug@amsat.org>
The UART is present on the chipset regardless there is a
character device connected to it. Map it unconditionally.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200608172144.20461-2-f4bug@amsat.org>
Directly set the slot name when creating the device,
to display the device name in trace events.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-8-f4bug@amsat.org>
Add an entry for the 'empty_slot' device.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-7-f4bug@amsat.org>
Add a 'name' qdev property so when multiple slots are
accessed, we can notice which one is accessed.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-5-f4bug@amsat.org>
Empty slots model RAZ/WI access on a bus. Since we can still
(hot) plug devices on the bus, lower the slot priority, so
device added later is accessed first.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-3-f4bug@amsat.org>
These devices are not slots on a bus, but real I/O devices
that we do not implement. As the ISDN ROM would be a ROMD
device, also model it as UnimplementedDevice.
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
In Makefile.objs, the ui/ directory is restricted to system-mode:
43 ifeq ($(CONFIG_SOFTMMU),y)
...
65 common-obj-y += ui/
66 common-obj-m += ui/
...
82 endif # CONFIG_SOFTMMU
Restrict the ui/ stub added in commit 2df9f5718d to only build
it for system-mode emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200522172510.25784-14-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
