When taking the slow path for mutex acquisition, set the coroutine
value in the CoWaitRecord in push_waiter(), rather than both there and
in the caller.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210325112941.365238-4-pbonzini@redhat.com
Message-Id: <20210309144015.557477-4-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Given that the block size is read from the header of the VDI file, a
wide variety of sizes might be seen. Rather than re-using a block
sized memory region when writing the VDI header, allocate an
appropriately sized buffer.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Message-id: 20210325112941.365238-3-pbonzini@redhat.com
Message-Id: <20210309144015.557477-3-david.edmondson@oracle.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If a new bitmap entry is allocated, requiring the entire block to be
written, avoiding leaking the buffer allocated for the block should
the write fail.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Message-id: 20210325112941.365238-2-pbonzini@redhat.com
Message-Id: <20210309144015.557477-2-david.edmondson@oracle.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* hw/display/xlnx_dp: Free FIFOs adding xlnx_dp_finalize()
* hw/arm/smmuv3: Drop unused CDM_VALID() and is_cd_valid()
* target/arm: Make number of counters in PMCR follow the CPU
* hw/timer/renesas_tmr: Add default-case asserts in read_tcnt()
-----BEGIN PGP SIGNATURE-----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=4GT6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210330' into staging
* net/npcm7xx_emc.c: Fix handling of receiving packets when RSDR not set
* hw/display/xlnx_dp: Free FIFOs adding xlnx_dp_finalize()
* hw/arm/smmuv3: Drop unused CDM_VALID() and is_cd_valid()
* target/arm: Make number of counters in PMCR follow the CPU
* hw/timer/renesas_tmr: Add default-case asserts in read_tcnt()
# gpg: Signature made Tue 30 Mar 2021 14:23:33 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210330:
hw/timer/renesas_tmr: Add default-case asserts in read_tcnt()
target/arm: Make number of counters in PMCR follow the CPU
hw/arm/smmuv3: Drop unused CDM_VALID() and is_cd_valid()
hw/display/xlnx_dp: Free FIFOs adding xlnx_dp_finalize()
net/npcm7xx_emc.c: Fix handling of receiving packets when RSDR not set
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Mark the qcow2 cache clean timer as external to fix record/replay
- Fix the mirror filter node's permissions so that an external process
cannot grab an image while it is used as the mirror source
- Add documentation about FUSE exports to the storage daemon
- When creating a qcow2 image with the data-file-raw option, all
metadata structures should be preallocated
- iotest fixes
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAmBjG9ASHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AVa4H/1NC4aTFi2sMzyQ8hkUck2llPiZdxP4V
KZbyUay+z2pLPWMonyDP6szGv6444lHGBnGQWKZHcw4o5xWNu50jEB2YpkhXS9i1
8shkZNVGxy6CVxinhrFG9qMv7GuoX3vOsVu5HnBjgpM162ZVYR+Af/8erqG1A4js
9odM5Zl6hb+okbSovgucT3UxNeYvBDnhsKzpQnvUvsdJu3RKz6gSlTz+f6jJLLP/
+hK54CDkCpK4fY6W0QLcZcLmmhTHYZXgeKDAHWGAzBH5p3ARY6uAXGZ9+fLE88X4
fhgcuYeLMS+sJCzGXnEDAmGebGhEOzszvskBRIHdWK861zg0RssWQP4=
=BdFo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2021-03-30' into staging
Block patches for 6.0-rc1:
- Mark the qcow2 cache clean timer as external to fix record/replay
- Fix the mirror filter node's permissions so that an external process
cannot grab an image while it is used as the mirror source
- Add documentation about FUSE exports to the storage daemon
- When creating a qcow2 image with the data-file-raw option, all
metadata structures should be preallocated
- iotest fixes
# gpg: Signature made Tue 30 Mar 2021 13:38:40 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2021-03-30:
iotests/244: Test preallocation for data-file-raw
qcow2: Force preallocation with data-file-raw
qsd: Document FUSE exports
block/mirror: Fix mirror_top's permissions
iotests/046: Filter request length
qcow2: use external virtual timers
iotests/116: Fix reference output
iotests: fix 051.out expected output after error text touchups
iotests: Fix typo in iotest 051
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 81b3ddaf87 we fixed a use of uninitialized data
in read_tcnt(). However this change wasn't enough to placate
Coverity, which is not smart enough to see that if we read a
2 bit field and then handle cases 0, 1, 2 and 3 then there cannot
be a flow of execution through the switch default. Add explicit
default cases which assert that they can't be reached, which
should help silence Coverity.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210319162458.13760-1-peter.maydell@linaro.org
Currently we give all the v7-and-up CPUs a PMU with 4 counters. This
means that we don't provide the 6 counters that are required by the
Arm BSA (Base System Architecture) specification if the CPU supports
the Virtualization extensions.
Instead of having a single PMCR_NUM_COUNTERS, make each CPU type
specify the PMCR reset value (obtained from the appropriate TRM), and
use the 'N' field of that value to define the number of counters
provided.
This means that we now supply 6 counters for Cortex-A53, A57, A72,
A15 and A9 as well as '-cpu max'; Cortex-A7 and A8 stay at 4; and
Cortex-R5 goes down to 3.
Note that because we now use the PMCR reset value of the specific
implementation, we no longer set the LC bit out of reset. This has
an UNKNOWN value out of reset for all cores with any AArch32 support,
so guest software should be setting it anyway if it wants it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20210311165947.27470-1-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
They were introduced in commit 9bde7f0674 ("hw/arm/smmuv3: Implement
translate callback") but never actually used. Drop them.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20210325142702.790-1-yuzenghui@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When building with --enable-sanitizers we get:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x5618479ec7cf in malloc (qemu-system-aarch64+0x233b7cf)
#1 0x7f675745f958 in g_malloc (/lib64/libglib-2.0.so.0+0x58958)
#2 0x561847c2dcc9 in xlnx_dp_init hw/display/xlnx_dp.c:1259:5
#3 0x56184a5bdab8 in object_init_with_type qom/object.c:375:9
#4 0x56184a5a2bda in object_initialize_with_type qom/object.c:517:5
#5 0x56184a5a24d5 in object_initialize qom/object.c:536:5
#6 0x56184a5a2f6c in object_initialize_child_with_propsv qom/object.c:566:5
#7 0x56184a5a2e60 in object_initialize_child_with_props qom/object.c:549:10
#8 0x56184a5a3a1e in object_initialize_child_internal qom/object.c:603:5
#9 0x5618495aa431 in xlnx_zynqmp_init hw/arm/xlnx-zynqmp.c:273:5
The RX/TX FIFOs are created in xlnx_dp_init(), add xlnx_dp_finalize()
to destroy them.
Fixes: 58ac482a66 ("introduce xlnx-dp")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210323182958.277654-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Three test cases:
(1) Adding a qcow2 (metadata) file to an existing data file, see whether
we can read the existing data through the qcow2 image.
(2) Append data to the data file, grow the qcow2 image accordingly, see
whether we can read the new data through the qcow2 image.
(3) At runtime, add a backing image to a freshly created qcow2 image
with an external data file (with data-file-raw). Reading data from
the qcow2 image must return the same result as reading data from the
data file, so everything in the backing image must be ignored.
(This did not use to be the case, because without the L2 tables
preallocated, all clusters would appear as unallocated, and so the
qcow2 driver would fall through to the backing file.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210326145509.163455-3-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Setting the qcow2 data-file-raw bit means that you can ignore the
qcow2 metadata when reading from the external data file. It does not
mean that you have to ignore it, though. Therefore, the data read must
be the same regardless of whether you interpret the metadata or whether
you ignore it, and thus the L1/L2 tables must all be present and give a
1:1 mapping.
This patch changes 244's output: First, the qcow2 file is larger right
after creation, because of metadata preallocation. Second, the qemu-img
map output changes: Everything that was not explicitly discarded or
zeroed is now a data area.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210326145509.163455-2-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Max noticed that since blk_aio_pwrite_zeroes() may invoke the callback
before returning, the callbacks will never see *count == 0 and thus
never free the count variable or decrement num_formats causing a CQE to
never be posted.
Coverity (CID 1451082) also picked up on the fact that count would not
be free'ed if the namespace was of zero size.
Fix both of these issues by explicitly checking *count and finalize for
the given namespace if --(*count) is zero. Enqueing a CQE if there are
no AIOs outstanding after this case is already handled by nvme_format()
by inspecting *num_formats.
Reported-by: Max Reitz <mreitz@redhat.com>
Reported-by: Coverity (CID 1451082)
Fixes: dc04d25e2f ("hw/block/nvme: add support for the format nvm command")
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
If nvme_map_dptr() fails, nvme_dif_rw() will leak the bounce context.
Fix this by using the same error handling as everywhere else in the
function.
Reported-by: Coverity (CID 1451080)
Fixes: 146f720c55 ("hw/block/nvme: end-to-end data protection")
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Implementing FUSE exports required no changes to the storage daemon, so
we forgot to document them there. Considering that both NBD and
vhost-user-blk exports are documented in its man page (and NBD exports
in its --help text), we should probably do the same for FUSE.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210217115844.62661-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
mirror_top currently shares all permissions, and takes only the WRITE
permission (if some parent has taken that permission, too).
That is wrong, though; mirror_top is a filter, so it should take
permissions like any other filter does. For example, if the parent
needs CONSISTENT_READ, we need to take that, too, and if it cannot share
the WRITE permission, we cannot share it either.
The exception is when mirror_top is used for active commit, where we
cannot take CONSISTENT_READ (because it is deliberately unshared above
the base node) and where we must share WRITE (so that it is shared for
all images in the backing chain, so the mirror job can take it for the
target BB).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210211172242.146671-2-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
For its concurrent requests, 046 has always filtered the offset,
probably because concurrent requests may settle in any order. However,
it did not filter the request length, and so if requests with different
lengths settle in an unexpected order (notably the longer request before
the shorter request), the test fails (for no good reason).
Filter the length, too.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200918153323.108932-1-mreitz@redhat.com>
Regular virtual timers are used to emulate timings
related to vCPU and peripheral states. QCOW2 uses timers
to clean the cache. These timers should have external
flag. In the opposite case they affect the execution
and it can't be recorded and replayed.
This patch adds external flag to the timer for qcow2
cache clean.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <161700516327.1141158.8366564693714562536.stgit@pasha-ThinkPad-X280>
Signed-off-by: Max Reitz <mreitz@redhat.com>
15ce94a68c ("block/qed: bdrv_qed_do_open: deal with errp") has improved
the qed driver's error reporting, though sadly did not add a test for
it.
The good news are: There already is such a test, namely 116.
The bad news are: Its reference output was not adjusted, and so now it
fails.
Let's fix the reference output, which has the nice side effect of
demonstrating 15ce94a68ca's improvements.
Fixes: 15ce94a68c
("block/qed: bdrv_qed_do_open: deal with errp")
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210326141419.156831-1-mreitz@redhat.com>
A patch was recently applied that touched up some error messages that
pertained to key names like 'node-name'. The trouble is it only updated
tests/qemu-iotests/051.pc.out and not tests/qemu-iotests/051.out as
well.
Do that now.
Fixes: 785ec4b1b9 ("block: Clarify error messages pertaining to
'node-name'")
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Message-Id: <20210318200949.1387703-2-ckuehl@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There is an typo in iotest 051, correct it.
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20210324084321.90952-1-tao3.xu@intel.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The kernel allows a NULL msg in recvfrom so that he size of the next
message may be queried before allocating a correctly sized buffer. This
change allows the syscall translator to pass along the NULL msg pointer
instead of returning early with EFAULT.
Signed-off-by: Zach Reizner <zachr@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <CAFNex=DvFCq=AQf+=19fTfw-T8eZZT=3NnFFm2JMFvVr5QgQyA@mail.gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
QEMU crashes with certain targets when trying to show the help
output of EHCI devices:
$ ./qemu-system-aarch64 -device ich9-usb-ehci1,help
qemu-system-aarch64: ../../devel/qemu/softmmu/physmem.c:1154: phys_section_add:
Assertion `map->sections_nb < TARGET_PAGE_SIZE' failed.
Aborted (core dumped)
This happens because the device is doing things at "instance_init" time
that should be done at "realize" time instead. So move the related code
to the realize() function instead. (NB: This now also matches the
memory_region_del_subregion() calls which are done in usb_ehci_unrealize(),
and not during finalize()).
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210326095155.1994604-1-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since the virtio-gpu-ccw device depends on the hw-display-virtio-gpu
module, which provides the type virtio-gpu-device, packaging the
hw-display-virtio-gpu module as a separate package that may or may not
be installed along with the qemu package leads to problems. Namely if
the hw-display-virtio-gpu is absent, qemu continues to advertise
virtio-gpu-ccw, but it aborts not only when one attempts using
virtio-gpu-ccw, but also when libvirtd's capability probing tries
to instantiate the type to introspect it.
Let us thus introduce a module named hw-s390x-virtio-gpu-ccw that
is going to provide the virtio-gpu-ccw device. The hw-s390x prefix
was chosen because it is not a portable device.
With virtio-gpu-ccw built as a module, the correct way to package a
modularized qemu is to require that hw-display-virtio-gpu must be
installed whenever the module hw-s390x-virtio-gpu-ccw.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20210317095622.2839895-4-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduce a symbol which can be used to prevent ccw modules
being loaded into system emulators without ccw support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20210317095622.2839895-3-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The definition S390_ADAPTER_SUPPRESSIBLE was moved to "cpu.h", per
suggestion of Thomas Huth. From interface design perspective, IMHO, not
a good thing as it belongs to the public interface of
css_register_io_adapters(). We did this because CONFIG_KVM requeires
NEED_CPU_H and Thomas, and other commenters did not like the
consequences of that.
Moving the interrupt related declarations to s390_flic.h was suggested
by Cornelia Huck.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20210317095622.2839895-2-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When building with --enable-sanitizers we get:
Direct leak of 32 byte(s) in 2 object(s) allocated from:
#0 0x5618479ec7cf in malloc (qemu-system-aarch64+0x233b7cf)
#1 0x7f675745f958 in g_malloc (/lib64/libglib-2.0.so.0+0x58958)
#2 0x561847f02ca2 in usb_packet_init hw/usb/core.c:531:5
#3 0x561848df4df4 in usb_ehci_init hw/usb/hcd-ehci.c:2575:5
#4 0x561847c119ac in ehci_sysbus_init hw/usb/hcd-ehci-sysbus.c:73:5
#5 0x56184a5bdab8 in object_init_with_type qom/object.c:375:9
#6 0x56184a5bd955 in object_init_with_type qom/object.c:371:9
#7 0x56184a5a2bda in object_initialize_with_type qom/object.c:517:5
#8 0x56184a5a24d5 in object_initialize qom/object.c:536:5
#9 0x56184a5a2f6c in object_initialize_child_with_propsv qom/object.c:566:5
#10 0x56184a5a2e60 in object_initialize_child_with_props qom/object.c:549:10
#11 0x56184a5a3a1e in object_initialize_child_internal qom/object.c:603:5
#12 0x561849542d18 in npcm7xx_init hw/arm/npcm7xx.c:427:5
Similarly to commit d710e1e7bd ("usb: ehci: fix memory leak in
ehci"), fix by calling usb_ehci_finalize() to free the USBPacket.
Fixes: 7341ea075c
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210323183701.281152-1-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
"move" is incorrectly initialized.
Fix it by using a switch statement and also treating unknown commands
with a fallback.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210312100108.2706195-5-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vugbm implements GBM device wrapping, udmabuf and memory fallback.
However, the fallback/detection logic is flawed, as if "/dev/udmabuf"
failed to be opened, it will not initialize vugbm and crash later.
Rework the vugbm_device_init() logic to initialize correctly in all
cases.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210312100108.2706195-4-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For similar reasons as commit 3af1671852 ("spice: flush on GL update
before notifying client"), vhost-user-gpu must ensure the GL state is
flushed before sharing its rendering result.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210312100108.2706195-3-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
"-usbdevice ccid" was not documented and -usbdevice itself was marked
as deprecated before QEMU v6.0. And searching for "-usbdevice ccid"
in the internet does not show any useful results, so likely nobody
was using the ccid device via the -usbdevice option. Remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210311092829.1479051-1-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When setting up the pointer for the sigreturn stub in the return
address register (r14) we currently use the host frame address instead
of the guest frame address.
Note: This only caused problems if Qemu has been built with
--disable-pie (as it is in distros nowadays). Otherwise guest_base
defaults to 0 hiding the actual problem.
Signed-off-by: Andreas Krebbel <krebbel@linux.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210324185128.63971-1-krebbel@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This dirty bitmap fix solves a crash that can be triggered in the destination
QEMU process during live migration.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmBbUfMACgkQnKSrs4Gr
c8hTrgf/f0yUnW6NT6yCPpq5kN4vwaZBS9oOu+WxUlLZE6Rx46zcNnet6yXO6CLI
4EUdHqosuSGw6Hh3Ld3HO4HeUFGZEy8kkKEkQpvtn6d4KptxP/8HxIjPHcK+uzTu
yGTHGlZ0xW+1cMmCpa2VhxJGfQhpl8lp07tnedn7Ip+HMkrclvwhipN4lnvZIfzL
OG1uCAHqlk/BMGulCief2U4dGAi/DWxQDtzB0/3Lo8F2r08EH8sG8aDaHlD9G2jW
Ru/l+5MGHqG7AFKqDei3NF2zaaUqkR+8hQHK1/qJKqhjtMsiHoDYnWcg9MmTRPnv
gwSrGti7gvVjIKi/VhV/VCGmCOlChg==
=/jcS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha-gitlab/tags/block-pull-request' into staging
Pull request
This dirty bitmap fix solves a crash that can be triggered in the destination
QEMU process during live migration.
# gpg: Signature made Wed 24 Mar 2021 14:51:31 GMT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha-gitlab/tags/block-pull-request:
migrate-bitmaps-postcopy-test: check that we can't remove in-flight bitmaps
migration/block-dirty-bitmap: make incoming disabled bitmaps busy
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- include kernel-doc API reference for plugins
- fix semihosting SYS_HEAPINFO
- various tweaks to improve CI runtime
- more stroz fixes
- fix iotest CI regressions
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmBbTIgACgkQ+9DbCVqe
KkTGPQf+LqwQeJswpn6/CMpNikNWM8tGZCr/mWuArQ+7yvjkDImKzrOHFBFylCbA
/A5FJ4hbeGoDJWzgQERx9iOiwHBsJ6Co3+E5qUiZnfDTyxWW4YBHOSFyBxq4RpEt
t/f++CIllKQ9u0QQAJnzgmdkrp+mZedrHwkhlaZlMwT3qSzWueAoEsfsc6hkja/U
lS6uIBWA31VCSh7GS/jRkYBPLA6JjJt1BR9kvcsi6d9OC45iLDe2fUzLC0CLFjnN
hWliIEh8amkezp+G5IL2ciXA5y0wYMig6ZWg1+8ZknfKQS7pAka6DK9Cr6pvwFaU
8zrzF+/BqoWLi8VGm9L6kEOUgswNIQ==
=zrEh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-6.0-rc0-fixed-240321-1' into staging
Various fixes for 6.0:
- include kernel-doc API reference for plugins
- fix semihosting SYS_HEAPINFO
- various tweaks to improve CI runtime
- more stroz fixes
- fix iotest CI regressions
# gpg: Signature made Wed 24 Mar 2021 14:28:24 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-6.0-rc0-fixed-240321-1: (22 commits)
gitlab: default to not building the documentation
iotests: iothreads need ioeventfd
iotests: test m68k with the virt machine
iotests: Revert "iotests: use -ccw on s390x for 040, 139, and 182"
blockdev: with -drive if=virtio, use generic virtio-blk
m68k: add the virtio devices aliases
qdev: define list of archs with virtio-pci or virtio-ccw
gitlab: extend timeouts for CFI builds
utils: Work around mingw strto*l bug with 0x
utils: Tighter tests for qemu_strtosz
cirrus.yml: Update the FreeBSD task to version 12.2
configure: Don't use the __atomic_*_16 functions for testing 128-bit support
gitlab-ci.yml: Merge the trace-backend testing into other jobs
tests/tcg: add HeapInfo checking to semihosting test
linux-user/riscv: initialise the TaskState heap/stack info
semihosting/arm-compat-semi: don't use SET_ARG to report SYS_HEAPINFO
semihosting/arm-compat-semi: unify GET/SET_ARG helpers
semihosting: move semihosting tests to multiarch
tools/virtiofsd: include --socket-group in help
docs/devel: expand style section of memory management
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In d0f26e68a0 ("gitlab: force enable docs build in Fedora, Ubuntu,
Debian") we made sure we can build the documents on more than one
system. However we don't want to build documents all the time as it's
a waste of cycles (and energy). So lets reduce the total amount of
documentation we build while still keeping coverage of at least one
build on each supported target.
Fixes: a8a3abe0b3 ("gitlab: move docs and tools build across from Travis")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210323165308.15244-23-alex.bennee@linaro.org>
And ioeventfd are only available with virtio-scsi-pci or virtio-scsi-ccw,
use the alias but add a rule to require virtio-scsi-pci or virtio-scsi-ccw
for the tests that use iothreads.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210319202335.2397060-7-laurent@vivier.eu>
Message-Id: <20210323165308.15244-22-alex.bennee@linaro.org>
This allows to cover the virtio tests with a 32bit big-endian
virtio-mmio machine.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210319202335.2397060-6-laurent@vivier.eu>
Message-Id: <20210323165308.15244-21-alex.bennee@linaro.org>
Commit f1d5516ab5 introduces a test in some iotests to check if
the machine is a s390-ccw-virtio and to select virtio-*-ccw rather
than virtio-*-pci.
We don't need that because QEMU already provides aliases to use the correct
virtio interface according to the machine type.
This patch removes all virtio-*-pci and virtio-*-ccw to use virtio-*
instead and remove get_virtio_scsi_device().
This also enables virtio-mmio devices (virtio-*-device)
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210319202335.2397060-5-laurent@vivier.eu>
Message-Id: <20210323165308.15244-20-alex.bennee@linaro.org>
Rather than checking if the machine is an s390x to use virtio-blk-ccw
instead of virtio-blk-pci, use the alias virtio-blk that is set to
the expected target.
This also enables the use of virtio-blk-device for targets without
PCI or CCW.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210319202335.2397060-4-laurent@vivier.eu>
Message-Id: <20210323165308.15244-19-alex.bennee@linaro.org>
Similarly to 5f629d943c ("s390x: fix s390 virtio aliases"),
define the virtio aliases.
This allows to start machines with virtio devices without
knowledge of the implementation type.
For instance, we can use "-device virtio-scsi" on
m68k, s390x or PC, and the device will be respectively
"virtio-scsi-device", "virtio-scsi-ccw" or "virtio-scsi-pci".
This already exists for s390x and -ccw interfaces, add them
for m68k and MMIO (-device) interfaces.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210319202335.2397060-3-laurent@vivier.eu>
Message-Id: <20210323165308.15244-18-alex.bennee@linaro.org>
This is used to define virtio-*-pci and virtio-*-ccw aliases
rather than substracting the CCW architecture from all the others.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210319202335.2397060-2-laurent@vivier.eu>
Message-Id: <20210323165308.15244-17-alex.bennee@linaro.org>
These builds are running very close to the default build limit and as
they are already pared down the only other option is to extend the
timeout a little to give some breathing room.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210323165308.15244-16-alex.bennee@linaro.org>
Mingw recognizes that "0x" has value 0 without setting errno, but
fails to advance endptr to the trailing garbage 'x'. This in turn
showed up in our recent testsuite additions for qemu_strtosz (commit
1657ba44b4 utils: Enhance testsuite for do_strtosz()); adjust our
remaining tests to show that we now work around this windows bug.
This patch intentionally fails check-syntax for use of strtol.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210317143325.2165821-3-eblake@redhat.com>
Message-Id: <20210323165308.15244-15-alex.bennee@linaro.org>
Our tests were not validating the return value in all cases, nor was
it guaranteeing our documented claim that 'res' is unchanged on error.
For that matter, it wasn't as thorough as the existing tests for
qemu_strtoi() and friends for proving that endptr and res are sanely
set. Enhancing the test found one case where we violated our
documentation: namely, when failing with EINVAL when endptr is NULL,
we shouldn't modify res.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210317143325.2165821-2-eblake@redhat.com>
Message-Id: <20210323165308.15244-14-alex.bennee@linaro.org>
FreeBSD version 12.1 is out of service now, and the task in the
Cirrus-CI is failing. Update to 12.2 to get it working again.
Unfortunately, there is a bug in libtasn1 that triggers with the
new version of Clang that is used there (see this thread for details:
https://lists.gnu.org/archive/html/qemu-devel/2021-02/msg00739.html ),
so we have to disable gnutls for now to make it work again. We can
enable it later again once libtasn1 has been fixed in FreeBSD.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210319101402.48871-1-thuth@redhat.com>
Message-Id: <20210323165308.15244-13-alex.bennee@linaro.org>
