Since all temps allocated by guest front-ends are now TEMP_TB,
and we don't recycle TEMP_TB, there's no point in requiring
that the front-ends free the temps at all. Begin by dropping
the inner-most checks that all temps have been freed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixes a bug in that we weren't reporting these changes.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using an atomic write or read-write insn on ROM is basically
a happens-never case. Handle it via stop-the-world, which
will generate non-atomic serial code, where we can correctly
ignore the write while producing the correct read result.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While changes are made to prot within tlb_set_page_full, they are
an implementation detail of softmmu. Retain the original for any
target use of probe_access_full.
Fixes: 4047368938 ("accel/tcg: Introduce tlb_set_page_full")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When CONFIG_PROFILER is set there are various undefined references to
profile_getclock. Include the header which defines this function.
For example:
../tcg/tcg.c: In function ‘tcg_gen_code’:
../tcg/tcg.c:4905:51: warning: implicit declaration of function ‘profile_getclock’ [-Wimplicit-function-declaration]
4905 | qatomic_set(&prof->opt_time, prof->opt_time - profile_getclock());
| ^~~~~~~~~~~~~~~~
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230303084948.3351546-1-rjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Here we are creating a temp whose value needs to be replaced,
but always storing NULL into CPUState.plugin_mem_cbs.
Use tcg_constant_ptr(0) explicitly.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All of these uses have quite local scope.
Avoid tcg_const_*, because we haven't added a corresponding
interface for TEMP_EBB. Use explicit tcg_gen_movi_* instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Write back the number of insns that we attempt to translate,
so that if we longjmp out we have a more accurate limit for
the next attempt. This results in fewer restarts when some
limit is consumed by few instructions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for returning the number of insns generated
via the same pointer. Adjust only the prototypes so far.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-13-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tb-jmp-cache.h contains a few small functions that only exist to hide a
CF_PCREL check, however the caller often already performs such a check.
This patch moves CF_PCREL checks from the callee to the caller, and also
removes these functions which now only hide an access of the jmp-cache.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-12-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-5-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change to match the recent change to probe_access_flags.
All existing callers updated to supply 0, so no change in behaviour.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
probe_access_flags() as it is today uses probe_access_full(), which in
turn uses probe_access_internal() with size = 0. probe_access_internal()
then uses the size to call the tlb_fill() callback for the given CPU.
This size param ('fault_size' as probe_access_internal() calls it) is
ignored by most existing .tlb_fill callback implementations, e.g.
arm_cpu_tlb_fill(), ppc_cpu_tlb_fill(), x86_cpu_tlb_fill() and
mips_cpu_tlb_fill() to name a few.
But RISC-V riscv_cpu_tlb_fill() actually uses it. The 'size' parameter
is used to check for PMP (Physical Memory Protection) access. This is
necessary because PMP does not make any guarantees about all the bytes
of the same page having the same permissions, i.e. the same page can
have different PMP properties, so we're forced to make sub-page range
checks. To allow RISC-V emulation to do a probe_acess_flags() that
covers PMP, we need to either add a 'size' param to the existing
probe_acess_flags() or create a new interface (e.g.
probe_access_range_flags).
There are quite a few probe_* APIs already, so let's add a 'size' param
to probe_access_flags() and re-use this API. This is done by open coding
what probe_access_full() does inside probe_acess_flags() and passing the
'size' param to probe_acess_internal(). Existing probe_access_flags()
callers use size = 0 to not change their current API usage. 'size' is
asserted to enforce single page access like probe_access() already does.
No behavioral changes intended.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230223234427.521114-2-dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Copy part of the description of commit f7b78602fd ("accel/tcg:
Add cluster number to TCG TB hash") in tcg_cpu_init_cflags(),
improving a bit CPUState::cluster_index documentation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230216142338.82982-2-philmd@linaro.org>
replay API is used deeply within TCG common code (common to user
and system emulation). Unfortunately "sysemu/replay.h" requires
some QAPI headers for few system-specific declarations, example:
void replay_input_event(QemuConsole *src, InputEvent *evt);
Since commit c2651c0eaa ("qapi/meson: Restrict UI module to system
emulation and tools") the QAPI header defining the InputEvent is
not generated anymore.
To keep it simple, extract the 'core' replay prototypes to a new
"exec/replay-core.h" header which we include in the TCG code that
doesn't need the rest of the replay API.
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <20221219170806.60580-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since commit a0e61807a3 ("qapi: Remove QMP events and commands from
user-mode builds") we don't generate the "qapi-commands-machine.h"
header in a user-emulation-only build.
Rename 'hmp.c' as 'monitor.c' and move the QMP functions from
cpu-exec.c (which is always compiled) to monitor.c (which is only
compiled when system-emulation is selected).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221219170806.60580-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221219170806.60580-2-philmd@linaro.org>
Both insert/remove_breakpoint() handlers are used in system and
user emulation. We can not use the 'hwaddr' type on user emulation,
we have to use 'vaddr' which is defined as "wide enough to contain
any #target_ulong virtual address".
gdbstub.c doesn't require to include "exec/hwaddr.h" anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216215519.5522-4-philmd@linaro.org>
If an instruction straddles a page boundary, and the first page
was ram, but the second page was MMIO, we would abort. Handle
this as if both pages are MMIO, by setting the ram_addr_t for
the first page to -1.
Reported-by: Sid Manning <sidneym@quicinc.com>
Reported-by: Jørgen Hansen <Jorgen.Hansen@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This commit was created with scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-19-armbru@redhat.com>
This will allow targets to avoid rolling their own.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are not yet considering atomicity of the 16-byte value;
this is a direct replacement for the current target code which
uses a pair of 8-byte operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
After commit 4e4fa6c12d ("accel/tcg: Complete cpu initialization
before registration"), it looks the CPUJumpCache pointer can be NULL.
This causes a SIGSEV when running debug-wp-migration kvm unit test.
At the first place it should be clarified why this TCG code is called
with KVM acceleration. This may hide another bug.
Fixes: 4e4fa6c12d ("accel/tcg: Complete cpu initialization before registration")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20230203171510.2867451-1-eric.auger@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are actually a whole bunch of helpers that don't affect memory
that we shouldn't instrument. They are helpfully identified by the
TCG_CALL_NO_SIDE_EFFECTS flag which marks out lookup_tb_ptr as well as
a lot of the maths helpers. To avoid the string compare we introduce a
new flag for plugin internals so we skip that too.
Related: #1381
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230108164731.61469-4-cota@braap.org>
[AJB: updated to skip all no SE plugins, add flag for plugin helper]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230124180127.1881110-34-alex.bennee@linaro.org>
We were mistakenly checking tcg_ctx->plugin_insn as a canary to know
whether the TB had emitted helpers that might have accessed memory.
The problem is that tcg_ctx->plugin_insn gets updated on every
instruction in the TB, which results in us wrongly performing the
optimization (i.e. not clearing cpu->plugin_mem_cbs) way too often,
since it's not rare that the last instruction in the TB doesn't
use helpers.
Fix it by tracking a per-TB canary.
While at it, expand documentation.
Related: #1381
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230108164731.61469-2-cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-32-alex.bennee@linaro.org>
Fixes the appended use-after-free. The root cause is that
during tb invalidation we use CPU_FOREACH, and therefore
to safely free a vCPU we must wait for an RCU grace period
to elapse.
$ x86_64-linux-user/qemu-x86_64 tests/tcg/x86_64-linux-user/munmap-pthread
=================================================================
==1800604==ERROR: AddressSanitizer: heap-use-after-free on address 0x62d0005f7418 at pc 0x5593da6704eb bp 0x7f4961a7ac70 sp 0x7f4961a7ac60
READ of size 8 at 0x62d0005f7418 thread T2
#0 0x5593da6704ea in tb_jmp_cache_inval_tb ../accel/tcg/tb-maint.c:244
#1 0x5593da6704ea in do_tb_phys_invalidate ../accel/tcg/tb-maint.c:290
#2 0x5593da670631 in tb_phys_invalidate__locked ../accel/tcg/tb-maint.c:306
#3 0x5593da670631 in tb_invalidate_phys_page_range__locked ../accel/tcg/tb-maint.c:542
#4 0x5593da67106d in tb_invalidate_phys_range ../accel/tcg/tb-maint.c:614
#5 0x5593da6a64d4 in target_munmap ../linux-user/mmap.c:766
#6 0x5593da6dba05 in do_syscall1 ../linux-user/syscall.c:10105
#7 0x5593da6f564c in do_syscall ../linux-user/syscall.c:13329
#8 0x5593da49e80c in cpu_loop ../linux-user/x86_64/../i386/cpu_loop.c:233
#9 0x5593da6be28c in clone_func ../linux-user/syscall.c:6633
#10 0x7f496231cb42 in start_thread nptl/pthread_create.c:442
#11 0x7f49623ae9ff (/lib/x86_64-linux-gnu/libc.so.6+0x1269ff)
0x62d0005f7418 is located 28696 bytes inside of 32768-byte region [0x62d0005f0400,0x62d0005f8400)
freed by thread T148 here:
#0 0x7f49627b6460 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:52
#1 0x5593da5ac057 in cpu_exec_unrealizefn ../cpu.c:180
#2 0x5593da81f851 (/home/cota/src/qemu/build/qemu-x86_64+0x484851)
Signed-off-by: Emilio Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230111151628.320011-2-cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-27-alex.bennee@linaro.org>
qemu/coroutine.h and qemu/lockable.h include each other.
They need each other only in macro expansions, so we could simply drop
both inclusions to break the loop, and add suitable includes to files
that expand the macros.
Instead, move a part of qemu/coroutine.h to new qemu/coroutine-core.h
so that qemu/coroutine-core.h doesn't need qemu/lockable.h, and
qemu/lockable.h only needs qemu/coroutine-core.h. Result:
qemu/coroutine.h includes qemu/lockable.h includes
qemu/coroutine-core.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221221131435.3851212-5-armbru@redhat.com>
[Semantic rebase conflict with 7c10cb38cc "accel/tcg: Add debuginfo
support" resolved]
The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
We now have the option to generate direct or indirect
goto_tb depending on the dynamic displacement, thus
the define is no longer necessary or completely accurate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace 'tc_ptr' and 'addr' with 'tb' and 'n'.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Stop overloading jmp_target_arg for both offset and address,
depending on TCG_TARGET_HAS_direct_jump. Instead, add a new
field to hold the jump insn offset and always set the target
address in jmp_target_addr[]. This will allow a tcg backend
to use either direct or indirect depending on displacement.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This can replace four other variables that are references
into the TranslationBlock structure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will shortly be used for more than reset.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Recently the g_assert(cpu == current_cpu) test has been
intermittently failing with gcc. Reorg the code around
the setjmp to minimize the lifetime of the cpu variable
affected by the setjmp.
This appears to fix the existing issue with clang as well.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1147
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add ability to dump /tmp/perf-<pid>.map and jit-<pid>.dump.
The first one allows the perf tool to map samples to each individual
translation block. The second one adds the ability to resolve symbol
names, line numbers and inspect JITed code.
Example of use:
perf record qemu-x86_64 -perfmap ./a.out
perf report
or
perf record -k 1 qemu-x86_64 -jitdump ./a.out
DEBUGINFOD_URLS= perf inject -j -i perf.data -o perf.data.jitted
perf report -i perf.data.jitted
Co-developed-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Co-developed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-4-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add libdw-based functions for loading and querying debuginfo. Load
debuginfo from the system and the linux-user loaders.
This is useful for the upcoming perf support, which can then put
human-readable guest symbols instead of raw guest PCs into perfmap and
jitdump files.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As in page_get_flags, we need to try again with the mmap
lock held if we fail a page lookup.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Because we allow lockless lookups, we have to be careful
when it is freed. Use rcu to delay the free until safe.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When called from syscall(), we are not within a TB and pc == 0.
We can skip the check for invalidating the current TB.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have been allocating a worst case number of arguments
to support calls. Instead, allow the size to vary.
By default leave space for 4 args, to maximize reuse,
but allow calls to increase the number of args to 32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Split patch in two]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-3-philmd@linaro.org>
In order to have variable size allocated TCGOp, pass the number
of arguments we use (and would allocate) up to tcg_op_alloc().
This alters tcg_emit_op(), tcg_op_insert_before() and
tcg_op_insert_after() prototypes.
In tcg_op_alloc() ensure the number of arguments is in range.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Extracted from bigger patch]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-2-philmd@linaro.org>
Better to re-use the existing function for copying ops.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We copied all of the arguments in copy_op_nocheck.
We only need to replace the one argument that we change.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The function pointer is immediately after the output and input
operands; no need to search.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Narrow the scope of the lock to the actual read/write,
moving the cpu_transation_failed call outside the lock.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
