Commit Graph

32 Commits

Author SHA1 Message Date
Philippe Mathieu-Daudé
6c3014858c target/nios2: Remove the deprecated Nios II target
The Nios II target is deprecated since v8.2 in commit 9997771bc1
("target/nios2: Deprecate the Nios II architecture").

Remove:
- Buildsys / CI infra
- User emulation
- System emulation (10m50-ghrd & nios2-generic-nommu machines)
- Tests

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Message-Id: <20240327144806.11319-3-philmd@linaro.org>
2024-04-24 16:03:38 +02:00
Paolo Bonzini
9ed7c6dd9f mips: do not list individual devices from configs/
Add new "select" and "imply" directives if needed.  The resulting
config-devices.mak files are the same as before.
Builds without default devices will become much smaller
than before, and qtests fail (as expected, though suboptimal)
for mips64-softmmu because most tests do not use -nodefaults,
so remove it from build-without-defaults

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-03-08 15:51:22 +01:00
Peter Maydell
273a70ae82 hw/arm/mps3r: Initial skeleton for mps3-an536 board
The AN536 is another FPGA image for the MPS3 development board. Unlike
the existing FPGA images we already model, this board uses a Cortex-R
family CPU, and it does not use any equivalent to the M-profile
"Subsystem for Embedded" SoC-equivalent that we model in hw/arm/armsse.c.
It's therefore more convenient for us to model it as a completely
separate C file.

This commit adds the basic skeleton of the board model, and the
code to create all the RAM and ROM. We assume that we're probably
going to want to add more images in future, so use the same
base class/subclass setup that mps2-tz.c uses, even though at
the moment there's only a single subclass.

Following commits will add the CPUs and the peripherals.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-9-peter.maydell@linaro.org
2024-02-15 14:32:38 +00:00
Paolo Bonzini
2df1eb2756 kconfig: use "select" to enable semihosting
Just like all other dependencies, these can be expressed in Kconfig
files rather than in the default configurations.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240129115809.1039924-1-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-10-alex.bennee@linaro.org>
2024-02-09 17:52:30 +00:00
Inès Varhol
41581f1361 hw/arm: Add minimal support for the B-L475E-IOT01A board
This commit adds a new B-L475E-IOT01A board using the STM32L475VG SoC
as well as a dedicated documentation file.
The implementation is derived from the Netduino Plus 2 machine.
There are no peripherals implemented yet, only memory regions.

Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240108135849.351719-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-09 14:42:40 +00:00
BALATON Zoltan
d9656f860a hw/ppc: Add emulation of AmigaOne XE board
The AmigaOne is a rebranded MAI Teron board that uses U-Boot firmware
with patches to support AmigaOS and is very similar to pegasos2 so can
be easily emulated sharing most code with pegasos2. The reason to
emulate it is that AmigaOS comes in different versions for AmigaOne
and PegasosII which only have drivers for one machine and firmware so
these only run on the specific machine. Adding this board allows
another AmigaOS version to be used reusing already existing peagasos2
emulation. (The AmigaOne was the first of these boards so likely most
widespread which then inspired Pegasos that was later replaced with
PegasosII due to problems with Articia S, so these have a lot of
similarity. Pegasos mainly ran MorphOS while the PegasosII version of
AmigaOS was added later and therefore less common than the AmigaOne
version.)

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <804935e7a5921548d630576159ae2c758fe6e275.1699382232.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-11-07 15:49:13 -03:00
Cédric Le Goater
cc9ff56fc3 kconfig: Add PCIe devices to s390x machines
It is useful to extend the number of available PCIe devices to KVM guests
for passthrough scenarios and also to expose these models to a different
(big endian) architecture. Introduce a new config PCIE_DEVICES to select
models, Intel Ethernet adapters and one USB controller. These devices all
support MSI-X which is a requirement on s390x as legacy INTx are not
supported.

Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20230712080146.839113-1-clg@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-07-14 11:10:57 +02:00
Fabiano Rosas
da324efb17 arm/Kconfig: Keep Kconfig default entries in default.mak as documentation
When we moved the arm default CONFIGs into Kconfig and removed them
from default.mak, we made it harder to identify which CONFIGs are
selected by default in case users want to disable them.

Bring back the default entries into default.mak, but keep them
commented out. This way users can keep their workflows of editing
default.mak to remove build options without needing to search through
Kconfig.

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230523180525.29994-3-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-30 15:50:17 +01:00
Fabiano Rosas
29d9efca16 arm/Kconfig: Do not build TCG-only boards on a KVM-only build
Move all the CONFIG_FOO=y from default.mak into "default y if TCG"
statements in Kconfig. That way they won't be selected when
CONFIG_TCG=n.

I'm leaving CONFIG_ARM_VIRT in default.mak because it allows us to
keep the two default.mak files not empty and keep aarch64-default.mak
including arm-default.mak. That way we don't surprise anyone that's
used to altering these files.

With this change we can start building with --disable-tcg.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230426180013.14814-12-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-02 10:54:32 +01:00
Fabiano Rosas
99f2f2ad9e arm/Kconfig: Always select SEMIHOSTING when TCG is present
We are about to enable the build without TCG, so CONFIG_SEMIHOSTING
and CONFIG_ARM_COMPATIBLE_SEMIHOSTING cannot be unconditionally set in
default.mak anymore. So reflect the change in a Kconfig.

Instead of using semihosting/Kconfig, use a target-specific file, so
that the change doesn't affect other architectures which might
implement semihosting in a way compatible with KVM.

The selection from ARM_v7M needs to be removed to avoid a cycle during
parsing.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230426180013.14814-11-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-02 10:54:32 +01:00
Juan Quintela
b530ccde5d migration: Remove spurious files
I introduced spurious files on my tree during a rebase:

commit ebfc578715
Author: Zhenzhong Duan <zhenzhong.duan@intel.com>
Date:   Mon Oct 17 15:53:51 2022 +0800

    multifd: Fix flush of zero copy page send request

    Make IO channel flush call after the inflight request has been drained
    in multifd thread, or else we may missed to flush the inflight request.

    Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
    Reviewed-by: Juan Quintela <quintela@redhat.com>
    Signed-off-by: Juan Quintela <quintela@redhat.com>

To make things worse, it appears like Zhenzhong is the one to blame.

for(int i=0; i < 1000000; i++) {
	printf("I will not do rebases when I am tired\n");
}

Sorry, Juan.

Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2023-02-11 16:51:09 +01:00
Zhenzhong Duan
ebfc578715 multifd: Fix flush of zero copy page send request
Make IO channel flush call after the inflight request has been drained
in multifd thread, or else we may missed to flush the inflight request.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2023-02-06 19:22:57 +01:00
Peter Maydell
a8d6abe129 MIPS patches queue
A bunch of cleanups from various people.
 
 - Improved GT64120 on big-endian hosts
 - GT64120 north bridge and MC146818 RTC devices are now target independent
 - Bonito64 north bridge converted to 3-phase reset API
 - PCI refactors around PIIX devices
 - Support for nanoMIPS in bootloader generator API
 - New YAMON Malta Avocado test
 - Removal of 'trap and emulate' KVM support
 - System-specific QMP commands restricted to system emulation
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmPBekAACgkQ4+MsLN6t
 wN4wjxAAtYxyt6WUBpiYfV/LnbQFpAsacues1Vhy9MPYEg5a/iuXWKvWtgRYvGww
 qR0GVQH8rH7tgnCZK+ioq9jX+hvfBskP6CnKhxmb5zDGm7vP7jhhu8UFWY/EtBgq
 0zpNeLMXtnRJ6PBqo/nWFCVtcpDRZ6IkSbpGWkVkciRFc5n/2VCnlIj8k2I1oMvL
 11cp2xFQnaPReFXIpMjJHuHv1NObykdlvVg6wQo/A/4qIb8EvJQEPmePjG9Sf0i0
 v2dhnnxG9mze7+uq0dIC16x8Azko3N7dmtNlBU/aGb9OELwx35aux2M4dNDVogwn
 DqL/Wsk54TFewECOfS48t/a/TqV8j/ISW1d/JvovBrN2KovmIAbtqHuMUqKVk5l0
 23ZOIIPIYwmScZwIlkCIGUuIzFig1zhEmQcoEQaFe/B0oLB2eN/x0Bk9Yklo+i2A
 WNiyiAj7k5492qEdndOySEEDVt6886F/+CdQ6QYF5Z1L/ELck7XHBH3mGDznWpPn
 6IURyVquPJx7ul62jSGI+Gc+qakNoahIhPo5O7hklOM9GwWNOWXHveyb7xjs7j+O
 eWyVcet+o7hoHkCzmfbyTPySI4qCpF9fA42jqPhATwQPwmGXpbr+4BxUq3KtE43y
 w9tEigwd4voN3dWLItVh6QE4in70osz3XHp93byvo8bHlS0huVY=
 =oXX+
 -----END PGP SIGNATURE-----

Merge tag 'mips-20230113' of https://github.com/philmd/qemu into staging

MIPS patches queue

A bunch of cleanups from various people.

- Improved GT64120 on big-endian hosts
- GT64120 north bridge and MC146818 RTC devices are now target independent
- Bonito64 north bridge converted to 3-phase reset API
- PCI refactors around PIIX devices
- Support for nanoMIPS in bootloader generator API
- New YAMON Malta Avocado test
- Removal of 'trap and emulate' KVM support
- System-specific QMP commands restricted to system emulation

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmPBekAACgkQ4+MsLN6t
# wN4wjxAAtYxyt6WUBpiYfV/LnbQFpAsacues1Vhy9MPYEg5a/iuXWKvWtgRYvGww
# qR0GVQH8rH7tgnCZK+ioq9jX+hvfBskP6CnKhxmb5zDGm7vP7jhhu8UFWY/EtBgq
# 0zpNeLMXtnRJ6PBqo/nWFCVtcpDRZ6IkSbpGWkVkciRFc5n/2VCnlIj8k2I1oMvL
# 11cp2xFQnaPReFXIpMjJHuHv1NObykdlvVg6wQo/A/4qIb8EvJQEPmePjG9Sf0i0
# v2dhnnxG9mze7+uq0dIC16x8Azko3N7dmtNlBU/aGb9OELwx35aux2M4dNDVogwn
# DqL/Wsk54TFewECOfS48t/a/TqV8j/ISW1d/JvovBrN2KovmIAbtqHuMUqKVk5l0
# 23ZOIIPIYwmScZwIlkCIGUuIzFig1zhEmQcoEQaFe/B0oLB2eN/x0Bk9Yklo+i2A
# WNiyiAj7k5492qEdndOySEEDVt6886F/+CdQ6QYF5Z1L/ELck7XHBH3mGDznWpPn
# 6IURyVquPJx7ul62jSGI+Gc+qakNoahIhPo5O7hklOM9GwWNOWXHveyb7xjs7j+O
# eWyVcet+o7hoHkCzmfbyTPySI4qCpF9fA42jqPhATwQPwmGXpbr+4BxUq3KtE43y
# w9tEigwd4voN3dWLItVh6QE4in70osz3XHp93byvo8bHlS0huVY=
# =oXX+
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Jan 2023 15:35:28 GMT
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* tag 'mips-20230113' of https://github.com/philmd/qemu: (46 commits)
  scripts/git.orderfile: Display MAINTAINERS changes first
  target/mips: Restrict 'qapi-commands-machine.h' to system emulation
  hw/mips/boston: Rename MachineState 'mc' pointer to 'ms'
  hw/pci-host/bonito: Declare TYPE_BONITO_PCI_HOST_BRIDGE in header
  hw/pci-host/bonito: Use 'bonito_pci' for PCI function #0 code
  hw/pci-host/bonito: Use 'bonito_host' for PCI host bridge code
  hw/pci-host/bonito: Convert to 3-phase reset
  softmmu/rtc: Emit warning when using driftfix=slew on systems without mc146818
  hw/rtc/mc146818rtc: Make the mc146818 RTC device target independent
  hw/core/qdev-properties-system: Allow the 'slew' policy only on x86
  hw/intc: Extract the IRQ counting functions into a separate file
  hw/intc/i8259: Make using the isa_pic singleton more type-safe
  hw/usb/hcd-uhci: Introduce TYPE_ defines for device models
  hw/mips/Kconfig: Track Malta's PIIX dependencies via Kconfig
  hw/isa/piix4: Decouple INTx-to-LNKx routing which is board-specific
  hw/isa/piix3: Decouple INTx-to-LNKx routing which is board-specific
  hw/pci/pci: Factor out pci_bus_map_irqs() from pci_bus_irqs()
  hw/pci/pci_host: Trace config accesses on unexisting functions
  mips: Always include nanomips disassembler
  mips: Remove support for trap and emulate KVM
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-16 11:24:11 +00:00
Bernhard Beschow
c451e07798 hw/mips/Kconfig: Track Malta's PIIX dependencies via Kconfig
Tracking dependencies via Kconfig seems much cleaner.

Note that PIIX4 already depends on ACPI_PIIX4.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230109172347.1830-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-01-13 16:22:57 +01:00
Philippe Mathieu-Daudé
37e506b69a hw/mips/gt64xxx_pci: Let the GT64120 manage the lower 512MiB hole
Per the comment in the Malta board, the [0x0000.0000-0x2000.0000]
range is decoded by the GT64120, so move the "empty_slot" there.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221209151533.69516-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-13 09:32:32 +01:00
Felipe Balbi
ee5bffa9fc hw/arm: Add Olimex H405
Olimex makes a series of low-cost STM32 boards. This commit introduces
the minimum setup to support SMT32-H405. See [1] for details

[1] https://www.olimex.com/Products/ARM/ST/STM32-H405/

Signed-off-by: Felipe Balbi <balbi@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20221230145733.200496-3-balbi@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12 16:50:19 +00:00
Bernhard Beschow
fa5975f49e i386, mips: Resolve redundant ACPI and APM dependencies
Now that all ACPI controllers select the ACPI and APM dependencies
themselves, these explicit dependencies became redundant. Remove them.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221216130355.41667-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-01-08 01:54:21 -05:00
Bernhard Beschow
195f7e77de hw/isa/Kconfig: Fix dependencies of piix4 southbridge
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221022150508.26830-27-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-31 11:32:07 +01:00
Bernhard Beschow
9eb6abbf6a hw/isa/vt82c686: Instantiate IDE function in host device
The IDE function is closely tied to the ISA function (e.g. the IDE
interrupt routing happens there), so it makes sense that the IDE
function is instantiated within the south bridge itself.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220901114127.53914-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-10-31 11:32:07 +01:00
Bernhard Beschow
8cf7b3277d hw/ppc/meson: Allow e500 boards to be enabled separately
Gives users more fine-grained control over what should be compiled into
QEMU.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221003203142.24355-2-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-10-17 16:15:09 -03:00
Stafford Horne
b5fcfe927b hw/openrisc: Add the OpenRISC virtual machine
This patch adds the OpenRISC virtual machine 'virt' for OpenRISC.  This
platform allows for a convenient CI platform for toolchain, software
ports and the OpenRISC linux kernel port.

Much of this has been sourced from the m68k and riscv virt platforms.

The platform provides:
 - OpenRISC SMP with up to 4 cpus
 - A virtio bus with up to 8 devices
 - Standard ns16550a serial
 - Goldfish RTC
 - SiFive TEST device for poweroff and reboot
 - Generated Device Tree to automatically configure the guest kernel

Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-09-04 07:02:57 +01:00
Xiaojuan Yang
a8a506c390 hw/loongarch: Add support loongson3 virt machine type.
Emulate a 3A5000 board use the new loongarch instruction.
3A5000 belongs to the Loongson3 series processors.
The board consists of a 3A5000 cpu model and the virt
bridge. The host 3A5000 board is really complicated and
contains many functions.Now for the tcg softmmu mode
only part functions are emulated.

More detailed info you can see
https://github.com/loongson/LoongArch-Documentation

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-31-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-06 18:09:03 +00:00
Mark Cave-Ayland
0d98fbb57d hppa: use new CONFIG_HPPA_B160L option instead of CONFIG_DINO to build hppa machine
DINO refers to the GSC-PCI bridge device which will soon be handled separately,
however the QEMU HPPA machine is actually based upon the HPPA B160L as indicated
by the Linux kernel dmesg output when booted in qemu-system-hppa and the QEMU
MAINTAINERS file.

Update the machine configuration to use CONFIG_HPPA_B160L instead of CONFIG_DINO
and also update the machine description accordingly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-13-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08 18:52:36 +01:00
Philippe Mathieu-Daudé
3ac25236ea hw/display: Rename VGA_ISA_MM -> VGA_MMIO
There is no ISA bus part in the MMIO VGA device, so rename:

 *  hw/display/vga-isa-mm.c -> hw/display/vga-mmio.c
 *  CONFIG_VGA_ISA_MM -> CONFIG_VGA_MMIO
 *  ISAVGAMMState -> VGAMmioState
 *  isa_vga_mm_init() -> vga_mmio_init()

Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206224528.563588-2-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-01-13 10:58:54 +01:00
Yang Zhong
2f44bea907 Kconfig: Add CONFIG_SGX support
Add new CONFIG_SGX for sgx support in the Qemu, and the Kconfig
default enable sgx in the i386 platform.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-32-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30 14:50:19 +02:00
Ani Sinha
fe8adae345 hw/acpi: refactor acpi hp modules so that targets can just use what they need
Currently various acpi hotplug modules like cpu hotplug, memory hotplug, pci
hotplug, nvdimm hotplug are all pulled in when CONFIG_ACPI_X86 is turned on.
This brings in support for whole lot of subsystems that some targets like
mips does not need. They are added just to satisfy symbol dependencies. This
is ugly and should be avoided. Targets should be able to pull in just what they
need and no more. For example, mips only needs support for PIIX4 and does not
need acpi pci hotplug support or cpu hotplug support or memory hotplug support
etc. This change is an effort to clean this up.
In this change, new config variables are added for various acpi hotplug
subsystems. Targets like mips can only enable PIIX4 support and not the rest
of all the other modules which were being previously pulled in as a part of
CONFIG_ACPI_X86. Function stubs make sure that symbols which piix4 needs but
are not required by mips (for example, symbols specific to pci hotplug etc)
are available to satisfy the dependencies.

Currently, this change only addresses issues with mips malta targets. In future
we might be able to clean up other targets which are similarly pulling in lot
of unnecessary hotplug modules by enabling ACPI_X86.

This change should also address issues such as the following:
https://gitlab.com/qemu-project/qemu/-/issues/221
https://gitlab.com/qemu-project/qemu/-/issues/193

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20210812071409.492299-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-04 09:07:46 -04:00
Alex Bennée
8ea7543865 hw/tricore: fix inclusion of tricore_testboard
Because commit f4063f9c31 ("meson: Introduce target-specific
Kconfig") ended being merged after commit 582079c9d2
("hw/tricore: Add testdevice for tests in tests/tcg/"), we
inadvertently added a symbol clash causing the build not to include
the testboard needed for check-tcg.

Fixes: f4063f9c31 ("meson: Introduce target-specific Kconfig")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210720114057.32053-2-alex.bennee@linaro.org>
[PMD: Updated description mentioning commits merged]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2021-07-20 20:10:21 +02:00
Philippe Mathieu-Daudé
ed2543a256 hw/ppc/Kconfig: Add missing dependency E500 -> DS1338 RTC
Commit 7abb479c7a ("PPC: E500: Add FSL I2C controller and integrate
RTC with it") added a global dependency on the DS1338 model, instead
of a machine one (via Kconfig). This gives trouble when building
standalone machines not exposing I2C bus:

  The following clauses were found for DS1338

      CONFIG_DS1338=y
      config DS1338 depends on I2C

Fix by selecting the DS1338 symbol in the single machine requiring
it, the E500.

Fixes: 7abb479c7a ("PPC: E500: Add FSL I2C controller and integrate RTC with it")
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210513163858.3928976-9-philmd@redhat.com>
2021-07-20 15:34:12 +02:00
Philippe Mathieu-Daudé
39f6049e47 hw/mips: Express dependencies of the Boston machine with Kconfig
Boston is built around a Xilinx FPGA, which includes a PCIe root port
and an UART. An Intel EG20T PCH connects the I/O peripherals, but only
the SATA bus is emulated.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paul Burton <pburton@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190311005618.19007-6-philmd@redhat.com>
2021-07-20 15:18:39 +02:00
Peter Maydell
d1987c8114 * More SVM fixes (Lara)
* Module annotation database (Gerd)
 * Memory leak fixes (myself)
 * Build fixes (myself)
 * --with-devices-* support (Alex)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDoeBgUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMtFAgAippmxRt3lt+tcdSrCOZlKmxW6veK
 nUidtzfH5uE8vQsh5Q98WCEq871C/C+St1gK+q2H/MLrJeAqZD39DV+SKTuZ6Tcp
 3jL0iYC+oO0OjkHppDQTUDweF9KrsAW1WEeNz2th1OUDSjBXuXbZ+N497taouX18
 p2UN0gKNsOO2/QFrKL5KO7vSC56eBGoZz6gKtw/7dDtJBtizf1xKBRHW43b+CnQJ
 mHLs7Tj6oMC+vnMHkUKLH/6za3WJF1XHs5fp2isRgqoOSP8m0r6CMg8JnFIvmQf/
 tbLospKSWqcgD5C5PlFm2wSOjdU7zuPKM7wchhKrrEIvdDPhXaKrlpwi5Q==
 =GFX1
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* More SVM fixes (Lara)
* Module annotation database (Gerd)
* Memory leak fixes (myself)
* Build fixes (myself)
* --with-devices-* support (Alex)

# gpg: Signature made Fri 09 Jul 2021 17:23:52 BST
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (48 commits)
  meson: Use input/output for entitlements target
  configure: allow the selection of alternate config in the build
  configs: rename default-configs to configs and reorganise
  hw/arm: move CONFIG_V7M out of default-devices
  hw/arm: add dependency on OR_IRQ for XLNX_VERSAL
  meson: Introduce target-specific Kconfig
  meson: switch function tests from compilation to linking
  vl: fix leak of qdict_crumple return value
  target/i386: fix exceptions for MOV to DR
  target/i386: Added DR6 and DR7 consistency checks
  target/i386: Added MSRPM and IOPM size check
  monitor/tcg: move tcg hmp commands to accel/tcg, register them dynamically
  usb: build usb-host as module
  monitor/usb: register 'info usbhost' dynamically
  usb: drop usb_host_dev_is_scsi_storage hook
  monitor: allow register hmp commands
  accel: build tcg modular
  accel: add tcg module annotations
  accel: build qtest modular
  accel: add qtest module annotations
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-11 22:20:51 +01:00
Alex Bennée
d1d5e9eefd configure: allow the selection of alternate config in the build
While the default config works well enough it does end up enabling a
lot of stuff. For more minimal builds we can select a different list
of devices and let Kconfig work out what we want. For example:

  ../../configure --without-default-features \
    --target-list=arm-softmmu,aarch64-softmmu \
    --with-devices-aarch64=minimal

will override the aarch64-softmmu default set of devices with a more
minimal set of devices that just enables the virt and sbsa-ref models.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210707131744.26027-6-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-09 18:21:34 +02:00
Alex Bennée
812b31d3f9 configs: rename default-configs to configs and reorganise
In preparation for offering variation to our build configurations lets
move everything and rename it to default. Common included base configs
are also renamed.

During the cleanup the stale usb.mak and pci.mak references were
removed from MAINTAINERS.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210707131744.26027-5-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-09 18:21:34 +02:00