This will allow to have one GL context but a variable number of
listeners.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
GraphicHw.gl_flushed was introduced to notify the
device (vhost-user-gpu) that the GL resources (the display scanout) are
no longer needed.
It was decoupled from QEMU own gl-blocking mechanism, but that
difference isn't helping. Instead, we can reuse QEMU gl-blocking and
notify virtio_gpu_gl_flushed() when unblocking (to unlock
vhost-user-gpu).
An extra block/unblock is added arount dpy_gl_update() so existing
backends that don't block will have the flush event handled. It will
also help when there are no backends associated.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Consoles can have an associated GL context, without listeners (they may
be added or removed later on).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
A remote client, such as Spice, will already avoid flooding the stream
by delaying the resize requests.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The dmabuf often becomes invalid right after unblocking pipeline
and graphic_hw_gl_flushed in case a new scanout blob is submitted
because the dmabuf associated with the current guest scanout is
freed after swapping.
So both graphic_hw_gl_block and graphic_hw_gl_flushed should be
executed after closing fence_fd for the current dmabuf.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20211121172237.14937-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
gd_draw_event shouldn't try to repaint if surface does not exist
for the VC.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20211104065153.28897-4-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
An old esurface should be destroyed and set to be NULL when doing
un-tab and re-tab so that a new esurface an context can be created
for the window widget that those will be bound to.
v2: enabling opengl specific routines only when CONFIG_OPENGL is set
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@intel.com>
Message-Id: <20211104065153.28897-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Instead of immediately drawing and submitting, queue and wait
for the draw signal if the dmabuf submitted is a blob.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210914211837.3229977-5-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Create sync objects and fences only for dmabufs that are blobs. Once a
fence is created (after glFlush) and is signalled,
graphic_hw_gl_flushed() will be called and virtio-gpu cmd processing
will be resumed.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210914211837.3229977-4-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since the texture release mechanism is same for both gtk-egl
and gtk-glarea, move the helper from gtk-egl to common gtk
code so that it can be shared by both gtk backends.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210914211837.3229977-2-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 584af1f1d9 ("ui/gtk: add a keyboard fifo to the VTE
consoles") changed the VTE chardev backend code to rely on the
chr_accept_input() callback function. The code expects a
chr_accept_input() call whenever qemu_chr_be_can_write() bytes
were written. It turns out this is wrong. Some chardev
frontends only call this callback after can_write was 0.
Change the code to send data until the keyboard fifo is empty
or qemu_chr_be_can_write() returns 0.
Fixes: 584af1f1d9 ("ui/gtk: add a keyboard fifo to the VTE consoles")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210810063257.17411-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since commit 8eb13bbbac ("ui/gtk: vte: fix sending multiple
characeters") it's very easy to lock up QEMU with the GTK ui.
If you configure a guest with a serial device and the guest
doesn't listen on this device, QEMU will lock up after
entering two characters in the serial console. That's because
current code uses a busy loop for the chardev write retries
and the busy loop doesn't terminate in this case.
To fix this problem add a fifo to the VTE consoles and use the
chr_accept_input() callback function to write the remaining
characters in the queue to the chardev.
The fifo has a size of 4096 bytes, so one can copy and paste
a fairly large URL or file path.
Fixes: 8eb13bbbac ("ui/gtk: vte: fix sending multiple characeters")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210725165039.5242-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To handle relative mouse input the event handler needs to move the mouse
away from the screen edges. Failing to do so results in the mouse
getting stuck at invisible walls. However the current implementation for
this is broken on hosts with multiple monitors.
With multiple monitors the mouse can be located outside of the current
monitor which is not handled by the current code. Also the monitor
itself might be located at coordinates different from (0, 0).
Signed-off-by: Dennis Wölfing <denniswoelfing@gmx.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210720143940.291413-1-denniswoelfing@gmx.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-12-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Want place gtk clipboard code in a separate C file, which in turn
requires GtkDisplayState being in a header file. So move it. No
functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20210519053940.1888907-1-kraxel@redhat.com
Message-Id: <20210519053940.1888907-9-kraxel@redhat.com>
c821a58ee7 ("ui/console: Pass placeholder surface to display")
eliminated the possibility that NULL is passed as surface to
dpy_gfx_switch and removed some NULL checks from gd_switch, but the
removal was not thoroughly. Remaining NULL checks were confusing for
Coverity and probably also for humans. This change removes those NULL
checks.
Reported-by: Coverity (CID 1448421)
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210308140713.17901-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
ui/console used to accept NULL as graphic console surface, but its
semantics was inconsistent among displays:
- cocoa and gtk-egl perform NULL dereference.
- egl-headless, spice and spice-egl do nothing.
- gtk releases underlying resources.
- sdl2-2d and sdl2-gl destroys the window.
- vnc shows a message, "Display output is not active."
Fortunately, only virtio-gpu and virtio-gpu-3d assign NULL so
we can study them to figure out the desired behavior. They assign
NULL *except* for the primary display when the device is realized,
reset, or its scanout is disabled. This effectively destroys
windows for the (uninitialized) secondary displays.
To implement the consistent behavior of display device
realization/reset, this change embeds it to the operation
switching the surface. When NULL was given as a new surface when
switching, ui/console will instead passes a placeholder down
to each display listeners.
sdl destroys the window for a secondary console if its surface is a
placeholder. The other displays simply shows the placeholder.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210225101316.83940-2-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This has the following visible changes:
- GBM is required only for OpenGL dma-buf.
- X11 is explicitly required by gtk-egl.
- EGL is now mandatory for the OpenGL displays.
The last one needs some detailed description. Before this change,
EGL was tested only for OpenGL dma-buf with the check of
EGL_MESA_image_dma_buf_export. However, all of the OpenGL
displays depend on EGL and EGL_MESA_image_dma_buf_export is always
defined by epoxy's EGL interface.
Therefore, it makes more sense to always check the presence of EGL
and say the OpenGL displays are available along with OpenGL dma-buf
if it is present.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210223060307.87736-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When using the GTK UI with libvte, multicharacter keystrokes are not
sent correctly (such as arrow keys). gd_vc_in should check the
CharBackend's can_receive instead of assuming multiple characters can be
received. This is not an issue for e.g. the SDL UI because
qemu_chr_be_write is called with len=1 for each character (SDL sends
more than once keystroke).
Modify gd_vc_in to call qemu_chr_be_write multiple times if necessary.
Buglink: https://bugs.launchpad.net/qemu/+bug/1407808
Signed-off-by: Zack Marvel <zpmarvel@gmail.com>
Message-Id: <20210221170613.13183-2-zpmarvel@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GtkGLArea is used on wayland, where EGL is usually available.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210204105232.834642-17-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are no users left.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210204105232.834642-7-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The gd_egl_refresh function, as the name suggests, is responsible for
refreshing displays when using EGL graphics with QEMU's GTK UI. This is
a perfect candidate for a function to update the refresh rate in.
Since gd_monitor_update_interval is inaccessible from the gd_egl_refresh
function, we need to expose/globalize it in the include/ui/gtk.h file.
Signed-off-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Message-Id: <20210114140153.301473-2-pavlica.nikola@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Limit the virtual console maximum update interval to
GUI_REFRESH_INTERVAL_DEFAULT. This papers over a integer
overflow bug in gtk3 on Windows where the reported monitor
refresh frequency can be much smaller than the real refresh
frequency.
The gtk bug report can be found here:
https://gitlab.gnome.org/GNOME/gtk/-/issues/3394
On my Windows 10 system gtk reports a monitor refresh rate of
1.511Hz instead of 60.031Hz and slows down the screen update
rate in qemu to a crawl. Provided you are affected by the gtk
bug on Windows, these are the steps to reproduce the issue:
Start qemu with -display gtk and activate all qemu virtual
consoles and notice the reduced qemu refresh rate. Activating
all virtual consoles is necessary, because gui_update() in
ui/console.c uses the minimum of all display change listeners
update interval and not yet activated virtual consoles report
the default update interval (30ms).
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20201213165724.13418-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The type of the variable window is GtkWidget. Rename the variable
from window to widget, because windows and widgets are different
things.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20201213165724.13418-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Redefining SI prefixes is always wrong. 1s has per definition
1000ms. Remove the misnamed named constant and replace it with
a comment explaining the frequency to period conversion in two
simple steps. Now you can cancel out the unit mHz in the comment
with the implicit unit mHz in refresh_rate_millihz and see why
the implicit unit ms for update_interval remains.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20201213165724.13418-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
CONFIG_GTK_GL is defined if OpenGL is present and GTK+
is 3.16 or newer. Since GTK+ 3.22 is the minimum supported
version, just use CONFIG_OPENGL instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Restricting system_wakeup/system_reset/system_powerdown to
machine.json pulls slightly less QAPI-generated code into
user-mode and tools.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-3-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Nikola reported on Windows when gd_vc_gfx_init() is called, the
window is not yet realized, so we run gd_refresh_rate_millihz(NULL)
which returns 0 milli-Hertz.
When a Widget is realized, it fires a 'realized' event. We already
have the gd_draw_event() handler registered for this even, so simply
move the gd_refresh_rate_millihz() there. When the event fires, the
window is known to exist.
This completes commit c4c00922cc original intention.
Reported-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Tested-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200817172331.598255-1-philmd@redhat.com
Suggested-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Tested-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GCC supports "#pragma GCC diagnostic" since version 4.6, and
Clang seems to support it, too, since its early versions 3.x.
That means that our minimum required compiler versions all support
this pragma already and we can remove the test from configure and
all the related #ifdefs in the code.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200710045515.25986-1-thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Based on a mail on the qemu-devel mailing list at
https://lists.nongnu.org/archive/html/qemu-devel/2020-05/msg02909.html
and some internet research the GTK3 versions on supported
platforms are:
RHEL-7.4: 3.22.10
RHEL-7.5: 3.22.26
Debian (Stretch): 3.22.11
Debian (Buster): 3.24.5
OpenBSD (Ports): 3.22.30
FreeBSD (Ports): 3.22.29
OpenSUSE Leap 15: 3.22.30
SLE12-SP2: Unknown
SLE15: 3.22.30
Ubuntu (Bionic): 3.22.30
Ubuntu (Focal): 3.24.18
macOS (Homebrew): 3.22.30
This justifies increasing the minimum required GTK version in
QEMU to 3.22.0.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-11-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since GTK 3.22 the function gdk_event_get_scancode() is
available. On Windows this function returns keyboard scancodes
and some extended flags. These raw keyboard scancodes are much
better suited for this use case than the half-cooked win32
virtual-key codes because scancodes report the key position on
the keyboard and the positions are independent of national
language settings.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-10-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Without keyboard grab Windows currently handles the two win keys
and the key events are also sent to the guest. This is undesir-
able. Only one program should handle key events. This patch ap-
plies commit c68f74b02e "win32: do not handle win keys when the
keyboard is not grabbed" from project spice-gtk to ui/gtk.c to
fix this problem.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-9-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since the removal of GTK2 code in commit 89d85cde75 the code
around ignore_keys is unused. See commit 1a01716a30 "gtk: Avoid
accel key leakage into guest on console switch" why it was only
needed for GTK2.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-5-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This code was last used before commit 2ec78706d1 "ui: convert
GTK and SDL1 frontends to keycodemapdb".
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no way to grab the Ctrl-Alt-Del key combination on
Windows. This key combination will leave all three keys in a
stuck condition. This patch uses the grab-broken-event to
release the keys.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Wire up the keyboard hooking code on Windows to fix the AltGr
key and improve keyboard grabbing.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-2-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Compress two lines into a single line if immediate return statement is found.
It also remove variables progress, val, data, ret and sock
as they are no longer needed.
Remove space between function "mixer_load" and '(' to fix the
checkpatch.pl error:-
ERROR: space prohibited between function name and open parenthesis '('
Done using following coccinelle script:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Simran Singhal <singhalsimran0@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200401165314.GA3213@simran-Inspiron-5558>
[lv: in handle_aiocb_write_zeroes_unmap() move "int ret" inside the #ifdef]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
misc.json contains definitions that are related to the system emulator,
so it can't be used for other tools like the storage daemon. This patch
moves basic functionality that is shared between all tools (and mostly
related to the monitor itself) into a new control.json, which could be
used in tools as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-3-kwolf@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When specified just set null_cursor to NULL so we get the default
pointer instead of a blank pointer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
gtk_widget_get_window() returns NULL if the widget's window is not
realized, and QEMU crashes. Example under gtk 3.22.30 (mate 1.20.1):
qemu-system-x86_64: Gdk: gdk_window_get_origin: assertion 'GDK_IS_WINDOW (window)' failed
(gdb) bt
#0 0x00007ffff496cf70 in gdk_window_get_origin () from /usr/lib64/libgdk-3.so.0
#1 0x00007ffff49582a0 in gdk_display_get_monitor_at_window () from /usr/lib64/libgdk-3.so.0
#2 0x0000555555bb73e2 in gd_refresh_rate_millihz (window=0x5555579d6280) at ui/gtk.c:1973
#3 gd_vc_gfx_init (view_menu=0x5555579f0590, group=0x0, idx=0, con=<optimized out>, vc=0x5555579d4a90, s=0x5555579d49f0) at ui/gtk.c:2048
#4 gd_create_menu_view (s=0x5555579d49f0) at ui/gtk.c:2149
#5 gd_create_menus (s=0x5555579d49f0) at ui/gtk.c:2188
#6 gtk_display_init (ds=<optimized out>, opts=0x55555661ed80 <dpy>) at ui/gtk.c:2256
#7 0x000055555583d5a0 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4358
Fixes: c4c00922cc and 28b58f19d2 (display/gtk: get proper refreshrate)
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jan Kiszka <jan.kiszka@web.de>
Message-id: 20200208161048.11311-3-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
