A Linux binary will have the string "S390EP" at address 0x10008,
which is important in getting the guest up off the ground. In the
case of a reboot (specifically chreipl going to a new device),
we should defer to the PSW at address zero for the new config,
which will re-write "S390EP" from the new image.
Let's clear it out at this point so that a reipl to, say, a DASD
passthrough device drives the IPL path from scratch without disrupting
disrupting the order of operations for other boots.
Rather than hardcoding the address of this magic (again), let's
define it somewhere so that the two users are visibly related.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20201120160117.59366-3-farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If, for example, we boot off a virtio device and chreipl to a vfio-ccw
device, the space at lowcore will be non-zero. We build a Read IPL CCW
at address zero, but it will have leftover PSW data that will conflict
with the Format-0 CCW being generated:
0x0: 00080000 80010000
------ Ccw0.cda
-- Ccw0.chainData
-- Reserved bits
The data address will be overwritten with the correct value (0x0), but
the apparent data chain bit will cause subsequent memory to be used as
the target of the data store, which may not be where we expect (0x0).
Clear out this space when we boot from DASD, so that we know it exists
exactly as we expect.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20201120160117.59366-2-farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This also brings in two patches that Debian had to include,
qboot_stop_using_inttypes.patch and qboot_no_jump_tables.diff.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201120152408.164346-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The architecture states that the iplb location is only written to low
core for list directed ipl and not for traditional ccw ipl. If we don't
skip this then operating systems that load by reading into low core
memory may fail to start.
We should also not write the iplb pointer for network boot as it might
overwrite content that we got via network.
Fixes: 9bfc04f9ef ("pc-bios: s390x: Save iplb location in lowcore")
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201030122823.347140-1-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
built-in options, do everything using them instead of the config_host
dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since we are now always doing out-of-tree builds, these gitignore
files should not be necessary anymore.
Message-Id: <20200919133637.72744-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's setup a PGM PSW, so we won't load 0s when a program exception
happens. Instead we'll load a disabled wait PSW.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-5-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If a blob provides a reset PSW then we should use it instead of
branching to the PSW address and using our own mask.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-4-frankja@linux.ibm.com>
[thuth: Use Elvis operator to shorten long line]
Signed-off-by: Thomas Huth <thuth@redhat.com>
We don't need to save the ipl_continue variable in lowcore and have it
limited to 32 bits because of the lowcore layout. Let's move it to a
new 64 bit variable and get rid of the reset info struct.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-3-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The two main types of zipl component entries are execute and
load/data. The last member of the component entry struct therefore
denotes either a PSW or an address. Let's make this a bit more clear
by introducing a union and cleaning up the code that uses that struct
member.
The execute type component entries written by zipl contain short PSWs,
not addresses. Let's mask them and only pass the address part to
jump_to_IPL_code(uint64_t address) because it expects an address as
visible by the name of the argument.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-2-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Break the loop if `cur_block_nr` is a null block number because this
means that the end of chunk is reached. In this case we will try to
boot the default entry.
Fixes: ba831b2526 ("s390-ccw: read stage2 boot loader data to find menu")
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20200924085926.21709-3-mhartmay@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This error takes effect when the magic value "zIPL" is located at the
end of a block. For example if s2_cur_blk = 0x7fe18000 and the magic
value "zIPL" is located at 0x7fe18ffc - 0x7fe18fff.
Fixes: ba831b2526 ("s390-ccw: read stage2 boot loader data to find menu")
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20200924085926.21709-2-mhartmay@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Use "<= ... - 4" instead of "< ... - 3"]
Signed-off-by: Thomas Huth <thuth@redhat.com>
enable_subchannel() is already done during is_dev_possibly_bootable()
(which is called from find_boot_device() -> find_subch()), so there
is no need to do this again in the main() function.
Message-Id: <20200806105349.632-9-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If you try to boot with two virtio-blk disks (without bootindex), and
only the second one is bootable, the s390-ccw bios currently stops at
the first disk and does not continue booting from the second one. This
is annoying - and all other major QEMU firmwares succeed to boot from
the second disk in this case, so we should do the same in the s390-ccw
bios, too.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200806105349.632-8-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If no boot device has been specified (via "bootindex=..."), the s390-ccw
bios scans through all devices to find a bootable device. But so far, it
stops at the very first block device (including virtio-scsi controllers
without attached devices) that it finds, no matter whether it is bootable
or not. That leads to some weird situatation where it is e.g. possible
to boot via:
qemu-system-s390x -hda /path/to/disk.qcow2
but not if there is e.g. a virtio-scsi controller specified before:
qemu-system-s390x -device virtio-scsi -hda /path/to/disk.qcow2
While using "bootindex=..." is clearly the preferred way of booting
on s390x, we still can make the life for the users at least a little
bit easier if we look at all available devices to find a bootable one.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1846975
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200806105349.632-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In case the user did not specify a boot device, we want to continue
looking for other devices if there are no valid SCSI disks on a virtio-
scsi controller. As a first step, do not panic in this case and let
the control flow carry the error to the upper functions instead.
Message-Id: <20200806105349.632-6-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Move the code to a separate function to be able to re-use it from a
different spot later.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200806105349.632-5-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove the "#ifndef E..." guards from the defines here - the header
guard S390_CCW_H at the top of the file should avoid double definition,
and if the error code is defined in a different file already, we're in
trouble anyway, then it's better to see the error at compile time instead
of hunting weird behavior during runtime later.
Also define ENODEV - we will use this in a later patch.
Message-Id: <20200806105349.632-4-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's move this part of the code into a separate function to be able
to use it from multiple spots later.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20200806105349.632-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The main QEMU code is compiled with -std=gnu99, -fwrapv and -fno-common.
We should use the same flags for the s390-ccw bios, too, to avoid that
we get different behavior with different compiler versions that changed
their default settings in the course of time (it happened at least with
-std=... and -fno-common in the past already).
While we're at it, also group the other flags here in a little bit nicer
fashion: Move the two "-m" flags out of the "-f" area and specify them on
a separate line.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20200806105349.632-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200918130354.1879275-1-anthony.perard@citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qboot isn't a bios and shouldnt be named that way.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200915120909.20838-2-kraxel@redhat.com
This is a minimalistic boot ROM written specifically for use with QEMU.
It supports loading the second-stage loader from SPI flash into RAM, SMP
boot, and not much else.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-7-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Refresh the "pc-bios/README" file with edk2 and OpenSSL release info,
matching the edk2-stable202008 firmware images added in the previous
patch.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1852196
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <e967b4d5-bcc2-3846-0ad6-9e8f4d2f9115@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Rebuild the pc-bios/edk2-*.fd.bz2 binaries, based on the edk2-stable202008
release.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1852196
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908072939.30178-10-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCX1aFfQAKCRD3ErUQojoP
X9kAAP9UgEFiOVCQILI7TSHl2moEjQ7x31CA/Bmod6V+eVKM6QD9Gucjy0KC5DWe
PogywA+CdndMLmH71GN/AFrENVqNnws=
=bbqB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hdeller/tags/target-hppa-pull-request' into staging
hppa power button support, graphics updates and firmware fixes
# gpg: Signature made Mon 07 Sep 2020 20:09:49 BST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* remotes/hdeller/tags/target-hppa-pull-request:
hw/display/artist: Allow screen size up to 2048 lines
hw/display/artist: Refactor x/y coordination extraction
hw/display/artist: Verify artist screen resolution
target/hppa: Fix boot with old Linux installation CDs
hw/hppa: Add power button emulation
hw/hppa: Tell SeaBIOS port address of fw_cfg
hw/hppa: Change fw_cfg port address
hw/hppa: Store boot device in fw_cfg section
hw/hppa: Make number of TLB and BTLB entries configurable
seabios-hppa: Update SeaBIOS to hppa-qemu-5.2-2 tag
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In case the qemu-keymap tool generating them is neither installed on the
system nor built from sources (due to xkbcommon not being available)
qemu will not find the keymaps when started directly from the build
tree,
This happens because commit ddcf607fa3 ("meson: drop keymaps symlink")
removed the symlink to the source tree, and the special handling for
install doesn't help in case we do not install qemu.
Lets fix that by simply copying over the file from the source tree as
fallback.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200827102617.14448-1-kraxel@redhat.com>
[thuth: Rebased, changed "config_host['qemu_datadir']" to "qemu_datadir",
added Gerd's UNLINK fix to configure script]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Changes:
* If only one bootable device is available, boot from it.
* Silence PDC warnings with HP-UX 11.11
* Inform Linux about fw_cfg port addresses
* Make power switch button configurable from qemu
* Clear screen on machine reset
* Add fw_cfg option to enable runtime debug info
* Fix panic on OpenBSD/6.7 regarding STI console
* Set text planes and used_bits in STI fields
* Fix mon_tbl entries
* Convert sti_region_list to an initialized struct
Signed-off-by: Helge Deller <deller@gmx.de>
The missing "/all" suffix prevents the pc-bios/ parts of the build
from running.
In the meanwhile, -Wall has moved from QEMU_CFLAGS to CFLAGS. Simplify
everything by not passing down CFLAGS, and add -Wall in the recursive
Makefiles.
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Fixes: 5e6d1573b4 ("remove Makefile.target", 2020-08-21)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cross-compiling, by default qemu_datadir is 'c:\Program
Files\QEMU', which is not recognized as being an absolute path, and
meson will end up adding the prefix again.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCX0bPowAKCRD3ErUQojoP
X43sAPwP4Prb0NQTw68l5oSwOoIcuWb4GZBjxOPecDis/0K2ogD/WswDJ8qk3RAQ
7XYGY8LuMdhwfcsx15TsuB/HAUie3QM=
=wIGS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hdeller/tags/target-hppa-v3-pull-request' into staging
artist out of bounds fixes
# gpg: Signature made Wed 26 Aug 2020 22:09:55 BST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* remotes/hdeller/tags/target-hppa-v3-pull-request:
hw/display/artist: Fix invalidation of lines near screen border
hw/display/artist: Fix invalidation of lines in artist_draw_line()
hw/display/artist: Unbreak size mismatch memory accesses
hw/display/artist: Prevent out of VRAM buffer accesses
Revert "hw/display/artist: Avoid drawing line when nothing to display"
hw/display/artist: Refactor artist_rop8() to avoid buffer over-run
hw/display/artist: Check offset in draw_line to avoid buffer over-run
hw/hppa/lasi: Don't abort on invalid IMR value
hw/display/artist.c: fix out of bounds check
hw/hppa: Implement proper SeaBIOS version check
seabios-hppa: Update to SeaBIOS hppa version 1
hw/hppa: Sync hppa_hardware.h file with SeaBIOS sources
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a device-tree source for petalogix-s3adsp1800 and
recompile the DTB.
This also removes the unused mpmc node which causes
compilation warnings.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add a device-tree source for petalogix-ml605 and recompile
the DTB.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
To keep sync with other RISC-V machines, change the default bios to
use generic platform fw_dynamic.elf image.
While we are here, add some comments to mention that using ELF files
for the Spike machine was intentional.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1596439832-29238-6-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Update virt and sifive_u machines to use the opensbi fw_dynamic bios
image built for the generic FDT platform.
Remove the out-of-date no longer used bios images.
Note:
1. To test 32-bit Linux kernel on QEMU 'sifive_u' 32-bit machine,
the following patch is needed:
http://lists.infradead.org/pipermail/linux-riscv/2020-July/001213.html
2. To test 64-bit Linux 5.3 kernel on QEMU 'virt' or 'sifive_u' 64-bit
machines, the following commit should be cherry-picked to 5.3:
commit 922b0375fc93fb1a20c5617e37c389c26bbccb70
Author: Albert Ou <aou@eecs.berkeley.edu>
Date: Fri Sep 27 16:14:18 2019 -0700
riscv: Fix memblock reservation for device tree blob
Linux 5.4 or above already contains this commit/fix.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1596439832-29238-5-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Note that sl and sv keymaps were not created by qemu-keymap.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make it independent from the rules.mak, and clean up to use pattern rules.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to 1.14 release being delayed it missed qemu 5.1.
The last snapshot has all code changes though, so this
changes only the version string in the binaries.
shortlog
========
Kevin O'Connor (1):
docs: Note v1.14.0 release
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Changes include:
* gcc-10 compile fix
* NetBSD boot fix due to wrong power button address
* Fix endian bug in romfile_loadint()
* Introduce SeaBIOS firmware version check
* Implement QEMU fw_cfg interface support
Required for proper version checking and gcc-10 update on Debian.
Signed-off-by: Helge Deller <deller@gmx.de>
seabios master branch got a few bugfixes, so update
to a newer snapshot to pick them up for 5.1-rc3.
shortlog
========
Kevin O'Connor (2):
vgabios: Fix preserve memory flag in handle_1000
ldnoexec: Add script to remove ET_EXEC flag from intermediate build objects
Paul Menzel (1):
nvme: Increase `nvme_cmd_readwrite()` message log level from 3 to 5
Stefan Reiter (1):
virtio-scsi: fix boot prio detection by using correct lun
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This adds tcgbios (this was posted earlier [1] but got lost)
and fixes FDT update at ibm,client-architecture-support
for huge guests.
The full list of changes:
Alexey Kardashevskiy (4):
make: Define default rule for .c when V=1 or V=2
version: update to 20200513
fdt: Avoid recursion when traversing tree
version: update to 20200717
Gustavo Romero (1):
board-qemu: Fix comment about SLOF start address
Stefan Berger (6):
tcgbios: Only write logs for PCRs that are allocated
tcgbios: Fix the vendorInfoSize to be of type uint8_t
tcgbios: Add support for SHA3 type of algorithms
elf: Implement elf_get_file_size to determine size of an ELF image
tcgbios: Implement tpm_hash_log_extend_event_buffer
tcgbios: Measure the bootloader file read from disk
[1] https://patchwork.ozlabs.org/project/qemu-devel/patch/20200513024355.121476-1-aik@ozlabs.ru/
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Makefile of the s390-ccw bios does not handle dependencies of the
*.c files from the headers yet, so that you often have to run a "make
clean" to get the build right when one of the headers has been changed.
Let's make sure that we generate and include dependency files for all
*.c files now to avoid this problem in the future.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200630142955.7662-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's make it a bit more clear that we check the full 64 bits to fit
into the 32 we return.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200624075226.92728-11-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Why should we do conversion of a ebcdic value if we have a handy table
where we could look up the ascii value instead?
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200624075226.92728-10-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
panic() was defined for the ccw and net bios, i.e. twice, so it's
cleaner to rather put it into the header.
Also let's add an infinite loop into the assembly of disabled_wait() so
the caller doesn't need to take care of it.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200624075226.92728-9-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's move some of the PSW mask defines into s390-arch.h and use them
in jump2ipl.c. Also let's introduce a new constant for the address
mask of 8 byte (short) PSWs.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200624075226.92728-8-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This constant enables 64 bit addressing, not the ESAME architecture,
so it shouldn't be named ZMODE.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200624075226.92728-7-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If we have a lowcore struct that has members for offsets that we want
to touch, why not use it?
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200624075226.92728-5-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
They are definitely helper functions.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200624075226.92728-4-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's consolidate timing related functions into one header.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200624075226.92728-3-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's initialize the structs at the beginning to ease reading and also
zeroing all other fields. This also makes the compiler stop
complaining about sense_id_ccw.flags being ored into when it's not
initialized.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200624075226.92728-2-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Upgrade OpenSBI from v0.6 to v0.7 and the pre-built bios images.
The v0.7 release includes the following commits:
f64f4b9 lib: Add a new platform feature to bringup secondary harts
b677a9b lib: Implement hart hotplug
5b48240 lib: Add possible hart status values
e3f69fc lib: Implement Hart State Management (HSM) SBI extension
6704216 lib: Check MSIP bit after returning from WFI
82ae8e8 makefile: Do setup of the install target more flexible
e1a5b73 platform: sifive: fu540: allow sv32 as an mmu-type
8c83fb2 lib: Fix return type of sbi_hsm_hart_started()
00d332b include: Move bits related defines and macros to sbi_bitops.h
a148996 include: sbi_bitops: More useful bit operations
4a603eb platform: kendryte/k210: Set per-HART stack size to 8KB
678c3c3 include: sbi_scratch: Set per-HART scratch size to 4KB
2abc55b lib: Sort build objects in alphabetical order
6e87507 platform: ae350: Sort build objects in alphabetical order
650c0e5 lib: sbi: Fix coding style issues
078686d lib: serial: Fix coding style issues
3226bd9 lib: Simple bitmap library
c741abc include: Simple hartmask library
d6d7e18 lib: sbi_init: Don't allow HARTID greater than SBI_HARTMASK_MAX_BITS
a4a6a81 lib: Introduce SBI_TLB_INFO_INIT() helper macro
d963164 lib: sbi_tlb: Use sbi_hartmask in sbi_tlb_info
71d2b83 lib: Move all coldboot wait APIs to sbi_init.c
2b945fc lib: sbi_init: Use hartmask for coldboot wait
44ce5b9 include: Remove disabled_hart_mask from sbi_platform
2db381f lib: Introduce sbi_hsm_hart_started_mask() API
61f7768 lib: sbi_ecall_legacy: Use sbi_hsm_hart_started_mask() API
466fecb lib: sbi_system: Use sbi_hsm_hart_started_mask() API
9aad831 lib: sbi_ipi: Use sbi_hsm_hart_started_mask() API
eede1aa lib: sbi_hart: Remove HART available mask and related APIs
757bb44 docs: Remove out-of-date documentation
86d37bb lib: sbi: Fix misaligned trap handling
ffdc858 platform: ariane-fpga: Change license for ariane-fpga from GPL-2.0 to BSD-2
4b2f594 sbi: Add definitions for true/false
0cfe49a libfdt: Add INT32_MAX and UINT32_MAX in libfdt_env.h
baac7e0 libfdt: Upgrade to v1.5.1 release
f92147c include: Make sbi_hart_id_to_scratch() as macro
eeae3d9 firmware: fw_base: Optimize _hartid_to_scratch() implementation
16e7071 lib: sbi_hsm: Optimize sbi_hsm_hart_get_state() implementation
823345e include: Make sbi_current_hartid() as macro in riscv_asm.h
9aabba2 Makefile: Fix distclean make target
9275ed3 platform: ariane-fpga: Set per-HART stack size to 8KB
2343efd platform: Set per-HART stack size to 8KB in the template platform codes
72a0628 platform: Use one unified per-HART stack size macro for all platforms
327ba36 scripts: Cover sifive/fu540 in the 32-bit build
5fbcd62 lib: sbi: Update pmp_get() to return decoded size directly
dce8846 libfdt: Compile fdt_addresses.c
fcb1ded lib: utils: Add a fdt_reserved_memory_fixup() helper
666be6d platform: Clean up include header files
6af5576 lib: utils: Move PLIC DT fix up codes to fdt_helper.c
e846ce1 platform: andes/ae350: Fix up DT for reserved memory
8135520 platform: ariane-fpga: Fix up DT for reserved memory
c9a5268 platform: qemu/virt: Fix up DT for reserved memory
6f9bb83 platform: sifive/fu540: Fix up DT for reserved memory
1071f05 platform: sifive/fu540: Remove "stdout-path" fix-up
dd9439f lib: utils: Add a fdt_cpu_fixup() helper
3f1c847 platform: sifive/fu540: Replace cpu0 node fix-up with the new helper
db6a2b5 lib: utils: Add a general device tree fix-up helper
3f8d754 platform: Update to call general DT fix-up helper
87a7ef7 lib: sbi_scratch: Introduce HART id to scratch table
e23d3ba include: Simplify HART id to scratch macro
19bd531 lib: sbi_hsm: Simplify hart_get_state() and hart_started() APIs
3ebfe0e lib: sbi_tlb: Simplify sbi_tlb_entry_process() function
209134d lib: Handle failure of sbi_hartid_to_scratch() API
bd6ef02 include: sbi_platform: Improve sbi_platform_hart_disabled() API
c9f60fc lib: sbi_scratch: Don't set hartid_to_scratch table for disabled HART
680b098 lib: sbi_hsm: Don't use sbi_platform_hart_count() API
db187d6 lib: sbi_hsm: Remove scratch parameter from hart_started_mask() API
814f38d lib: sbi_hsm: Don't use sbi_platform_hart_disabled() API
75eec9d lib: Don't use sbi_platform_hart_count() API
c51f02c include: sbi_platform: Introduce HART index to HART id table
315a877 platform: sifive/fu540: Remove FU540_ENABLED_HART_MASK option
a0c88dd lib: Fix sbi_ecall_register_extension to prevent extension IDs overlap
9a74a64 lib: Check MSIP bit after returning from WFI
5968894 platform: Move ariane standalone fpga project to its own project
ed265b4 platform: fpga/ariane: Remove redundant plic address macros
fb84879 platform: Add OpenPiton platform support
d1d6560 platform: fpga/common: Add a fdt parsing helper functions
040e4e2 lib: utils: Move fdt fixup helper routines to a different file
4c37451 platform: openpiton: Read the device configurations from device tree
4d93586 lib: prevent coldboot_lottery from overflowing
550ba88 scripts: Extend create-binary-archive.sh for unified binary tar ball
160c885 lib: utils: Improve fdt_cpu_fixup() implementation
1de66d1 lib: Optimize unpriv load/store implementation
626467c lib: Remove scratch parameter from unpriv load/store functions
cb78a48 lib: sbi_trap: Remove scratch parameter from sbi_trap_redirect()
d11c79c lib: sbi_emulate_csr: Remove scratch and hartid parameter
5a7bd0c lib: sbi_illegal_insn: Remove mcause, scratch and hartid parameters
fe37d7d lib: sbi_misaligned_ldst: Remove mcause, scratch and hartid parameters
7487116 lib: sbi_ecall: Remove mcause, scratch and hartid parameters
40b221b lib: sbi_trap: Simplify sbi_trap_handler() API
7b211ff include: sbi_platform: Remove priv parameter from hart_start() callback
5b6957e include: Use more consistent name for atomic xchg() and cmpxchg()
dd0f21c lib: sbi_scratch: Introduce sbi_scratch_last_hartid() API
54b2779 include: sbi_tlb: Remove scratch parameter from sbi_tlb_request()
9e52a45 include: sbi_ipi: Remove scratch parameter from most functions
ec0d80f include: sbi_system: Remove scratch parameter and redundant functions
0a28ea5 include: sbi_timer: Remove scratch parameter from most funcitons
648507a include: sbi_console: Remove scratch parameter from sbi_dprintf()
e5a7f55 platform: thead/c910: Use HSM extension to boot secondary cores
f281de8 lib: irqchip/plic: Fix maximum priority threshold value
6c7922e lib: Support vector extension
615587c docs: Update README about supported SBI versions
66d0184 lib: Allow overriding SBI implementation ID
9f1b72c include: Bump-up version to 0.7
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This is a single regression fix for for 5.0:
Greg Kurz (1):
slof: Only close stdout for virtio-serial devices
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Here's my final pull request for the qemu-5.0 soft freeze. Sorry this
is just under the wire - I hit some last minute problems that took a
while to fix up and retest.
Highlights are:
* Numerous fixes for the FWNMI feature
* A handful of cleanups to the device tree construction code
* Numerous fixes for the spapr-vscsi device
* A number of fixes and cleanups for real mode (MMU off) softmmu
handling
* Fixes for handling of the PAPR RMA
* Better handling of hotplug/unplug events during boot
* Assorted other fixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAl5wnnsACgkQbDjKyiDZ
s5JdpQ//eY/AOTs09UhvKxt8DN7lC2WyHGxYSncb2Tj2zaJyPPX9p296IDBMw+KX
Cafr6LzwLjpcpOyf/EWzg7qYGbNYoYgRWoOkHI/9pHsrIH3ZvhmnyTVQI5CffeEb
EDDXJUQo/2sFpAGeODr5zz+zAQUGzt6ZZUxAiQAF9RYc9ohUGD2x5c86Asx6ZTZo
/14bd3qnrcy1x+TxDetb1idFxFr2DsdYqpHAi88zHm+UaWzxYrb7kakd+YbqI24N
tYryf5SdtGrWAAdF/7nq2PQJFzskx+t0QearU+ruovRydxYbUtBpkr5HauoVuQXR
LiV270sDYDS/D1vvQQKzLxkUuvWmbZ0rB+2BAtS1rwq2sOKqYyQEAkTWfGtSXcf8
7fuZm2i1G78MuYGTOLCrF1u0owUB3QYHvt1NUW09GyWS8X3mahtj2fRe1RtPV/5d
NL217bcd32fkMoGCg/lFvK9sCQzR6zJGKkJvOGMVW4ahHCLixpjIWabWtdXjfguT
UahRPvlX7fzeVT+DISfjqyxwL+THnTvB3CTMWG2cktf0K1ke4SXcQ0mPyksN1NuC
QocfPCr1TN2ri8g9dAPwQmOkojnNs9izpIWRYSl3avTJFNseNPxuHQALXj2Y3Y/O
EoYxLN+cqPukQ1O3GxEj5QMKe8V/0986mxWnuS/dMohQOoy+zV4=
=BPnR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200317' into staging
ppc patch queue 2020-03-17
Here's my final pull request for the qemu-5.0 soft freeze. Sorry this
is just under the wire - I hit some last minute problems that took a
while to fix up and retest.
Highlights are:
* Numerous fixes for the FWNMI feature
* A handful of cleanups to the device tree construction code
* Numerous fixes for the spapr-vscsi device
* A number of fixes and cleanups for real mode (MMU off) softmmu
handling
* Fixes for handling of the PAPR RMA
* Better handling of hotplug/unplug events during boot
* Assorted other fixes
# gpg: Signature made Tue 17 Mar 2020 09:55:07 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.0-20200317: (45 commits)
pseries: Update SLOF firmware image
ppc/spapr: Ignore common "ibm,nmi-interlock" Linux bug
ppc/spapr: Implement FWNMI System Reset delivery
target/ppc: allow ppc_cpu_do_system_reset to take an alternate vector
ppc/spapr: Allow FWNMI on TCG
ppc/spapr: Fix FWNMI machine check interrupt delivery
ppc/spapr: Add FWNMI System Reset state
ppc/spapr: Change FWNMI names
ppc/spapr: Fix FWNMI machine check failure handling
spapr: Rename DT functions to newer naming convention
spapr: Move creation of ibm,architecture-vec-5 property
spapr: Move creation of ibm,dynamic-reconfiguration-memory dt node
spapr/rtas: Reserve space for RTAS blob and log
pseries: Update SLOF firmware image
ppc/spapr: Move GPRs setup to one place
target/ppc: Fix rlwinm on ppc64
spapr/xive: use SPAPR_IRQ_IPI to define IPI ranges exposed to the guest
hw/scsi/spapr_vscsi: Convert debug fprintf() to trace event
hw/scsi/spapr_vscsi: Prevent buffer overflow
hw/scsi/spapr_vscsi: Do not mix SRP IU size with DMA buffer size
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* get/set_uint cleanups (Felipe)
* Lock guard support (Stefan)
* MemoryRegion ownership cleanup (Philippe)
* AVX512 optimization for buffer_is_zero (Robert)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJecOZiAAoJEL/70l94x66DgGkH/jpY4IgqlSAAWCgaxfe1n1vg
ahSzSLrC8wiJq2Jxbmxn+5BbH6BxQ9ibflsY5bvCY/sTb7UlOFCPkFhQ2iUgplkw
ciB5UfgCA6OHpKEhpHhXtzlybtNOlxXNWYJ1SrcVXbRES8f7XdhMKs15mnJJuOOE
k/tuZo/44yZRJl0Cv+nkvIFcCVgyu1q0Lln/1MMPngY2r9gt893cY9feTBSSWgnp
+7HZr5TXI7mcIytczFKzbdujlG4391DGejKX66IIxGcWg9vXS7TwAStzH1vSKVfJ
73SKZBoCU5gpHHHC+dqVyouMerV+UE+WQPNtF+LCsNgJBw/2NXc1ZgDrtz1OI2c=
=+LRX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Bugfixes all over the place
* get/set_uint cleanups (Felipe)
* Lock guard support (Stefan)
* MemoryRegion ownership cleanup (Philippe)
* AVX512 optimization for buffer_is_zero (Robert)
# gpg: Signature made Tue 17 Mar 2020 15:01:54 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (62 commits)
hw/arm: Let devices own the MemoryRegion they create
hw/arm: Remove unnecessary memory_region_set_readonly() on ROM alias
hw/ppc/ppc405: Use memory_region_init_rom() with read-only regions
hw/arm/stm32: Use memory_region_init_rom() with read-only regions
hw/char: Let devices own the MemoryRegion they create
hw/riscv: Let devices own the MemoryRegion they create
hw/dma: Let devices own the MemoryRegion they create
hw/display: Let devices own the MemoryRegion they create
hw/core: Let devices own the MemoryRegion they create
scripts/cocci: Patch to let devices own their MemoryRegions
scripts/cocci: Patch to remove unnecessary memory_region_set_readonly()
scripts/cocci: Patch to detect potential use of memory_region_init_rom
hw/sparc: Use memory_region_init_rom() with read-only regions
hw/sh4: Use memory_region_init_rom() with read-only regions
hw/riscv: Use memory_region_init_rom() with read-only regions
hw/ppc: Use memory_region_init_rom() with read-only regions
hw/pci-host: Use memory_region_init_rom() with read-only regions
hw/net: Use memory_region_init_rom() with read-only regions
hw/m68k: Use memory_region_init_rom() with read-only regions
hw/display: Use memory_region_init_rom() with read-only regions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only change here is moving the decision about rtas-size
to QEMU.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This mainly fixes virtio-serial with and without
enabled iommu-platform.
The full list of changes is:
Alexey Kardashevskiy (3):
llfw: Fix debug printf warnings
virtio-serial: Close device completely
version: update to 20200312
Cédric Le Goater (1):
virtio: Fix typo in virtio_serial_init()
Greg Kurz (2):
virtio-serial: Don't override some words
virtio-serial: Rework shutdown sequence
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Although the real world SiFive HiFive Unleashed board is a 64-bit
hardware configuration, with QEMU it is possible to test 32-bit
configuration with the same hardware features.
This updates the roms Makefile to add the build rules for creating
the 32-bit OpenSBI firmware image for sifive_u machine. A pre-built
OpenSBI v0.6 image has been added as the default bios for 32-bit
sifive_u machine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Upgrade OpenSBI from v0.5 to v0.6 and the pre-built bios images.
The v0.6 release includes the following commits:
dd8ef28 firmware: Fix compile error for FW_PAYLOAD with latest GCC binutils
98f4a20 firmware: Introduce relocation lottery
f728a0b include: Sync-up encoding with priv v1.12-draft and hypervisor v0.5-draft
18897aa include: Use _UL() and _ULL() for defines in riscv_encoding.h
7a13beb firmware: Add preferred boot HART field in struct fw_dynamic_info
215421c lib: Remove date and time from init message
838657c include: Remove ilen member of struct unpriv_trap
b1d8c98 lib: No need to set VSSTATUS.MXR bit in get_insn()
0e1322b lib: Better naming of unpriv APIs for wider use
75f903d lib: Simplify trap parameters in sbi_ecall functions
c96cc03 lib: Fix CPU capabilities detection function
ab14f94 lib: Fix probe extension
813f7f4 lib: Add error detection for misa_extension
dc40042 include: sbi_platform: fix compilation for GCC-9
bd732ae include: Add guest external interrupt related defines
6590a7d lib: Delegate guest page faults to HS-mode
4370f18 include: Extend struct sbi_trap_info for mtval2 and mtinst
086dbdf lib: Fix sbi_get_insn() for load guest page fault
2be424b lib: Extend trap redirection for hypervisor v0.5 spec
7219477 lib: Use MTINST CSR in misaligned load/store emulation
b8732fe lib: Add replacement extension and function ids
aa0ed1d lib: Remove redundant IPI types
1092663 lib: Add TIME extension in SBI
9777aee lib: Add IPI extension in SBI
9407202 lib: Add hfence instruction encoding
331ff6a lib: Support stage1 and stage2 tlb flushing
86a31f5 lib: Implement RFENCE extension
c7d1b12 firmware: Return real DTB address when FW_xyz_FDT_ADDR is not defined
9beb573 firmware: Improve comments for fw_prev_arg1() and fw_next_arg1()
fc6bd90 docs: Improve docs for FDT address passing
46a90d9 lib: utils: Support CLINT with 32bit MMIO access on RV64 system
c0849cd platform: Add T-head C910 initial support
e746673 lib: Remove unnecessary checks from init_coldboot() and init_warmboot()
c3e406f lib: Add initial sbi_exit() API
55e191e lib: Add system early_exit and final_exit APIs
6469ed1 lib: Add timer exit API
b325f6b lib: Add ipi exit API
1993182 lib: Add irqchip exit API
2aa43a1 lib: save/restore MIE CSR in sbi_hart_wait_for_coldboot()
b0c9787 lib: do sbi_exit() upon halt IPI
15ed1e7 lib: improve system reboot and shutdown implementation
73c19e6 lib: zero-out memory allocated using sbi_scratch_alloc_offset()
a67fd68 lib: Add sbi_init_count() API
049ad0b build: Use -ffreestanding
e340bbf include: Add OPENSBI_EXTERNAL_SBI_TYPES in sbi_types.h
b28b8ac docs: Add description of using OPENSBI_EXTERNAL_SBI_TYPES
adf8b73 platform: thead/c910: Remove SBI_PLATFORM_HAS_PMP
f95dd39 docs: platform: Update SiFive FU540 doc as-per U-Boot v2020.01
6ffe1be firmware: Fix placement of .align directives
7daccae platform: thead/c910: Don't enable L2 cache in warm boot
a73d45c platform: thead/c910: Don't set plic/clint address in warm boot
30cdf00 scripts: Add C910 to platform list in the binary archive script
0492c5d include: Typo fix in comment for SBI_SCRATCH_SIZE define
046cc16 lib: Move struct sbi_ipi_data definition to sbi_ipi.c
3d2aaac lib: Introduce sbi_ipi_send_smode() API
da9b76b lib: Introduce sbi_ipi_send_halt() API
a8b4b83 lib: Introduce sbi_tlb_fifo_request() API
5f762d1 lib: Introduce sbi_ipi_event_create/destroy() APIs
817d50d lib: Drop _fifo from the name of various sbi_tlb_fifo_xyz() functions
84cd4fc lib: Initialize TLB management directly from coldboot/warmboot path
0a411bf include: Add generic and simple list handling APIs
37923c4 lib: Add dynamic registration of SBI extensions
7668502 lib: Factor-out SBI legacy extension
161b348 lib: Factor-out SBI replacement extensions
43ac621 lib: Factor-out SBI vendor extension
021b9e7 lib: Factor-out SBI base extension
85647a1 platform: template: typo fix in system reboot/shutdown names
ac1c229 platform: Update UART base addresses for qemu/sifve_u
d79173b platform: Add an platform ops to return platform specific tlb flush limit
2c2bbe7 platform: sifive/fu540: Set tlb range flush limit to zero
5ff1ab0 makefile: add support for building on macOS
6d0b4c5 platform: Drop qemu/sifive_u support
9a717ec platform: sifive: fu540: Add platform specific 'make run' cmd
d6fa7f9 doc: sifive: fu540: Update QEMU instruction when using U-Boot as the payload
179edde lib: sbi_scratch: use bitwise ops in sbi_scratch_alloc_offset()
897b8fb lib: Use __builtin_ctzl() in pmp_get()
1a8ca08 lib: Initialize out value in SBI calls
c2bfa2b lib: irqchip/plic: Disable all contexts and IRQs
c2f23cc platform: Add Spike initial support
a062200 platform: Remove stale options from config.mk files
c03c8a1 scripts: Add Spike to platform list of binary archive script
29bb2a6 docs: platform: Add documentation for Spike platform
48b06ad ThirdPartyNotices: Fix doc styles
892e879 doc: coreboot: Fix doc styles
fdfb533 doc: payload_linux: Fix doc styles
44d1296 doc: andes-ae350: Fix doc styles
a8ef0b5 doc: ariane-fpga: Fix doc styles
82fd42f doc: qemu_virt: Fix doc styles
f8ce996 doc: sifive_fu540: Fix doc styles
27a5c7f doc: thead-c910: Fix doc styles
0b41453 Revert "lib: Use __builtin_ctzl() in pmp_get()"
c66543d lib: utils: htif: Fix 32-bit build
bc874e3 lib: Don't check MIDELEG and MEDELEG at end of delegate_traps()
24c3082 lib: Print interrupt and exception delegation in boot prints
66fb729 platform: sifive: fu540: Add 32-bit specific fdt/payload addresses
3e7d666 platform: qemu: virt: Correct the typo in config.mk
c3b3b8f lib: Fix typo in atomic exchange functions
3936243 lib: Use available hart mask for correct hbase value
f8b3bb8 lib: Simplify the for-loop in sbi_ipi_send_many()
ac5e821 include: Bump-up version to 0.6
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This adds vTPM support, full-FDT-rebuild-on-CAS fixes and
basic ext4 support.
The full changelog is:
Alexey Kardashevskiy (10):
disk-label: Prepare for extenting
disk-label: Support Linux GPT partition type
ext2: Prepare for extending
ext2: Rename group-desc-size
ext2: Read size of group descriptors
ext2: Read all 64bit of inode number
ext2/4: Add basic extent tree support
elf64: Add LE64 ABIv1/2 support for loading images to given address
fdt: Fix creating new nodes at H_CAS
version: update to 20200221
Greg Kurz (2):
fdt: Fix update of "interrupt-controller" node at CAS
fdt: Delete nodes of devices removed between boot and CAS
Stefan Berger (8):
slof: Implement SLOF_get_keystroke() and SLOF_reset()
slof: Make linker script variables accessible
qemu: Make print_version variable accessible
tpm: Add TPM CRQ driver implementation
tpm: Add sha256 implementation
tcgbios: Add TPM 2.0 support and firmware API
tcgbios: Implement menu to clear TPM 2 and activate its PCR banks
tcgbios: Measure the GPT table
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Description copied from Linux kernel commit from Gustavo A. R. Silva
(see [3]):
--v-- description start --v--
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to
declare variable-length types such as these ones is a flexible
array member [1], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler
warning in case the flexible array does not occur last in the
structure, which will help us prevent some kind of undefined
behavior bugs from being unadvertenly introduced [2] to the
Linux codebase from now on.
--^-- description end --^--
Do the similar housekeeping in the QEMU codebase (which uses
C99 since commit 7be41675f7).
All these instances of code were found with the help of the
following Coccinelle script:
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
};
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
} QEMU_PACKED;
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f
[3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1
Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now the PVH option rom scans for the RSDP from 0xE0000 to
0xE1FFF. This is probobly a typo, it should scan from 0xE0000 to
0xFFFFF.
This is actually an issue on some QEMU versions/machines. For example,
when I run QEMU the RSDP is placed at 0xf5ad0 which will not be picked
up by the current implementation.
This bug still allows a Linux guest to boot (in most configurations) as
the kernel will just scan for the RSDP if one isn't provided.
Signed-off-by: Joe Richey <joerichey@google.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: 2785dc7b17 ("optionrom: add new PVH option rom")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The POP states that for a list directed IPL the IPLB is stored into
memory by the machine loader and its address is stored at offset 0x14
of the lowcore.
ZIPL currently uses the address in offset 0x14 to access the IPLB and
acquire flags about secure boot. If the IPLB address points into
memory which has an unsupported mix of flags set, ZIPL will panic
instead of booting the OS.
As the lowcore can have quite a high entropy for a guest that did drop
out of protected mode (i.e. rebooted) we encountered the ZIPL panic
quite often.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20200304114231.23493-19-frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
It's been deprecated since QEMU v3.1. The 40p machine should be
used nowadays instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200114114617.28854-1-thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Helge Deller (13):
Add PDC_MEM_MAP and ENTRY_INIT_SRCH_FRST for OSF/MkLinux
Return non-existant BTLB for PDC_BLOCK_TLB
Add serial, parallel and LAN port support of LASI chip
Implement ENTRY_IO_BBLOCK_IN IODC function
Do not print \r on parisc SeaBIOS
Fix serial ports and add PDC_MODEL functions for special instructions enablement
Implement SeaBIOS returning additional addresses. Fixes HP-UX boot.
Fix mod_pgs (number of pages) for graphic cards
Merge pull request #3 from svenschnelle/sti
Merge pull request #4 from svenschnelle/parisc-qemu-4.1.0
parisc: Implement PDC rendenzvous
parisc: Improve soft power button emulation
parisc: Fix line wrapping in STI console code
Sven Schnelle (7):
parisc: fix PDC info for graphics adapter
parisc: add missing header guard to hppa.h
parisc: add LASI PS/2 emulation.
parisc: Add STI support
parisc: wire up graphics console
parisc: Add support for setting STI screen resolution
parisc: support LASI RTC register
Required for STI and LASI support. Also adds a few Bugfixes.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-7-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Update to the final 1.13 release. No code changes.
git shortlog
============
Kevin O'Connor (1):
docs: Note v1.13.0 release
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We need to set the short psw indication bit in the reset psw, as it is
a short psw.
Exposed by "s390x: Properly fetch and test the short psw on diag308
subc 0/1".
Fixes: 9629823290 ("pc-bios/s390-ccw: do a subsystem reset before running the guest")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20191203132813.2734-5-frankja@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This fixes PCI bridges support regression.
This enables IOMMU support in virtio drivers.
The full list of changes is:
Alexey Kardashevskiy (12):
allocator: Fix format strings for DEBUG
virtio: Make virtio_set_qaddr static
client: Load initramdisk location
sloffs: Fix -Wunused-result gcc warnings in read/write
pci-phb: Reimplement dma-map-in/out
virtio: Store queue descriptors in virtio_device
virtio-net: Init queues after features negotiation
virtio: Enable IOMMU
ibm,client-architecture-support: Fix stack handling
fdt: Fix updating the tree at H_CAS
version: update to 20191206
version: update to 20191217
Michael Roth (1):
dma: Define default dma methods for using by client/package instances
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The existing s390 bios gets the LOADPARM information from the system using
an SCLP call that specifies a buffer length too small to contain all the
output.
The recent fixes in the SCLP code have exposed this bug, since now the
SCLP call will return an error (as per architecture) instead of
writing partially and completing successfully.
The solution is simply to specify the full page length as the SCCB
length instead of a smaller size.
Fixes: 832be0d8a3 ("s390x: sclp: Report insufficient SCCB length")
Fixes: 9a22473c70 ("pc-bios/s390-ccw: get LOADPARM stored in SCP Read Info")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <1574944437-31182-1-git-send-email-imbrenda@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Due to lchs support merge in upstream seabios gone wrong (applied v3
instead of v4) here is another seabios snapshot update with the
mis-merge fixed up, so lchs support should actually work in -rc2.
Also picked up two tpm bugfixes.
git shortlog from previous snapshot
===================================
Gerd Hoffmann (4):
Revert "geometry: Apply LCHS values for boot devices"
Revert "config: Add toggle for bootdevice information"
Revert "geometry: Add boot_lchs_find_*() utility functions"
Revert "geometry: Read LCHS from fw_cfg"
Sam Eiderman (4):
geometry: Read LCHS from fw_cfg
boot: Build ata and scsi paths in function
geometry: Add boot_lchs_find_*() utility functions
geometry: Apply LCHS values for boot devices
Stefan Berger (2):
tpm: Require a response to have minimum size of a valid response header
tcgbios: Check for enough bytes returned from TPM2_GetCapability
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This contains a handful of patches that I'd like to target for 4.2:
* OpenSBI upgrade to 0.5
* Increase in the flash size of the virt board.
* A non-functional cleanup.
* A cleanup to our MIP handling that avoids atomics.
This passes "make check" and boots OpenEmbedded for me.
-----BEGIN PGP SIGNATURE-----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=vwgx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.2-rc2' into staging
RISC-V Fixes for 4.2-rc2
This contains a handful of patches that I'd like to target for 4.2:
* OpenSBI upgrade to 0.5
* Increase in the flash size of the virt board.
* A non-functional cleanup.
* A cleanup to our MIP handling that avoids atomics.
This passes "make check" and boots OpenEmbedded for me.
# gpg: Signature made Thu 14 Nov 2019 18:39:27 GMT
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.2-rc2:
riscv/virt: Increase flash size
opensbi: Upgrade from v0.4 to v0.5
target/riscv: Remove atomic accesses to MIP CSR
remove unnecessary ifdef TARGET_RISCV64
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This release has:
Lot of critical fixes
Hypervisor extension support
SBI v0.2 base extension support
Debug prints support
Handle traps when doing unpriv load/store
Allow compiling without FP support
Use git describe to generate boot-time banner
Andes AE350 platform support
ShortLog:
Anup Patel (14):
platform: sifive/fu540: Move FDT further up
lib: Allow compiling without FP support
lib: Introduce sbi_dprintf() API
lib: Use sbi_dprintf() for invalid CSRs
lib: Handle traps when doing unpriv load/store in get_insn()
lib: Delegate supervisor ecall to HS-mode when H extension available
lib: Extend sbi_hart_switch_mode() to support hypervisor extension
lib: Extend sbi_trap_redirect() for hypervisor extension
lib: Redirect WFI trapped from VS/VU mode to HS-mode
include: Extend get_insn() to read instruction from VS/VU mode
lib: Emulate HTIMEDELTA CSR for platforms not having TIME CSR
Makefile: Minor fix in OPENSBI_VERSION_GIT
lib: Fix coldboot race condition observed on emulators/simulators
include: Bump-up version to 0.5
Atish Patra (16):
lib: Provide an atomic exchange function unsigned long
lib: Fix race conditions in tlb fifo access.
platform: Remove the ipi_sync method from all platforms.
lib: Fix timer for 32 bit
lib: Support atomic swap instructions
lib: Upgrade to full flush if size is at least threshold
docs: Update the fu540 platform guide as per U-Boot documents.
lib: Change tlb range flush threshold to 4k page instead of 1G
lib: provide a platform specific tlb range flush threshold
lib: Fix tlb flush range limit value
Test: Move test payload related code out of interface header
lib: Align error codes as per SBI specification.
lib: Rename existing SBI implementation as 0.1.
lib: Remove redundant variable assignment
lib: Implement SBI v0.2
lib: Provide a platform hook to implement vendor specific SBI extensions.
Bin Meng (6):
platform: sifive: fu540: Use standard value string for cpu node status
README: Document 32-bit / 64-bit images build
treewide: Use conventional names for 32-bit and 64-bit
platform: sifive: fu540: Expand FDT size before any patching
firmware: Use macro instead of magic number for boot status
docs: platform: Update descriptions for qemu/sifive_u support
Damien Le Moal (4):
kendryte/k210: Use sifive UART driver
kendryte/k210: remove sysctl code
README: Update license information
kendryte/k210: remove unused file
Georg Kotheimer (1):
utils: Use cpu_to_fdt32() when writing to fdt
Jacob Garber (4):
lib: Use bitwise & instead of boolean &&
lib: Use correct type for return value
lib: Prevent unintended sign extensions
lib: Correct null pointer check
Lukas Auer (1):
firmware: do not use relocated _boot_status before it is valid
Nylon Chen (3):
firmware: Fix the loop condition of _wait_relocate_copy_done section
platform: Add Andes AE350 initial support
scripts: Add AE350 to platform list in the binary archive script
Palmer Dabbelt (1):
Include `git describe` in OpenSBI
Zong Li (1):
Write MSIP by using memory-mapped control register
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
seabios 1.13 will be released later this month. This patch updates the
seabios submodule and binaries in qemu to a snapshot of git master.
That will increase the test coverage of the upcoming seabios release and
will also make the number of changes smaller when we update to the final
1.13 release during qemu code freeze for 4.2.
v3: add ahci bugfix
v2: build binaries with gcc 4.8.5 instead of gcc 8.3.1 (rhel7).
git shortlog rel-1.12.1..
=========================
David Woodhouse (2):
csm: Sanitise alignment constraint in Legacy16GetTableAddress
csm: Fix boot priority translation
Denis Plotnikov (1):
virtio: extend virtio queue size to 256
Gerd Hoffmann (21):
vga: move modelist from bochsvga.c to new svgamodes.c
vga: make memcpy_high() public
vga: add atiext driver
vga: add ati bios tables
vbe: add edid support.
ati: add edid support.
bochsvga: add edid support.
bochsdisplay: add edid support.
bochsdisplay: parse resolution from edid.
add get_keystroke_full() helper
bootmenu: add support for more than 9 entries
optionrom: disallow int19 redirect for pnp roms.
ati-vga: make less verbose
ati-vga: fix ati_read()
ati-vga: make i2c register and bits configurable
ati-vga: try vga ddc first
ati-vga: add rage128 edid support
bochsdisplay: add copyright and license to bochsdisplay.c
ramfb: add copyright and license to ramfb.c
cp437: add license to cp437.c
ahci: zero-initialize port struct
Joseph Pacheco-Corwin (1):
bootsplash: Added support for 16/24/32bpp in one function
Kevin O'Connor (10):
output: Avoid thunking to 16bit mode in printf() if no vgabios
docs: Update mailing list archive links
docs: Fix cut-and-paste error in Mailinglist.md archive link
usb-ehci: Clear pipe token on pipe reallocate
pciinit: Use %pP shorthand for printing device ids in intel_igd_setup()
virtio-pci: Use %pP format in dprintf() calls
Makefile: Build with -Wno-address-of-packed-member
svgamodes: Add copyright notice to vgasrc/svgamodes.c
docs: Add developer-certificate-of-origin
docs: Note release date for v1.12.1
Liran Alon (1):
pvscsi: ring_desc do not have to be page aligned
Sam Eiderman (6):
smbios: Add missing zero byte to Type 0
geometry: Read LCHS from fw_cfg
boot: Reorder functions in boot.c
geometry: Add boot_lchs_find_*() utility functions
config: Add toggle for bootdevice information
geometry: Apply LCHS values for boot devices
Stefan Berger (2):
tcgbios: Use table to convert hash to buffer size
tcgbios: Implement TPM 2.0 menu item to activate and deactivate PCR banks
Stefano Garzarella (1):
qemu: avoid debug prints if debugcon is not enabled
Stephen Douthit (1):
tpm: Check for TPM related ACPI tables before attempting hw probe
Uwe Kleine-König (3):
cbvga: reuse svga modes definitions from svgamodes.c
Add additional resolutions for 16:9 displays: 1600x900 and 2560x1440
Remove dos line endings introduced in the last two commits
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This aims v4.2 and fixes:
1. full FDT rendering;
2. gcc9 -Waddress-of-packed-member.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qboot is a minimalist x86 firmware for booting Linux kernels. It does
the mininum amount of work required for the task, and it's able to
boot both PVH images and bzImages without relying on option roms.
This characteristics make it an ideal companion for the microvm
machine type.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
This fixes USB host bus adapter name in the device tree to match QEMU's
one.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
SLOF implements one itself so let's remove it from QEMU. It is one less
image and simpler setup as the RTAS blob never stays in its initial place
anyway as the guest OS always decides where to put it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There is a possible memory leak in get_uuid(). Should free allocated mem
before
return NULL.
Signed-off-by: Yifan Luo <luoyifan@cmss.chinamobile.com>
Message-Id: <02cf01d55267$86cf2850$946d78f0$@cmss.chinamobile.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since commit 339686a358 ("pc-bios/s390-ccw:
zero out bss section"), we are clearing now the BSS in start.S, so there
is no need to pre-initialize the loadparm_str array with zeroes anymore.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
With the support of heterogeneous harts and PRCI model, it's now
possible to use the OpenSBI image (PLATFORM=sifive/fu540) built
for the real hardware.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Like other binary files, the executable attribute of opensbi images
should not be set.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This allocates space for FWNMI log in RTAS and fixes phandles at
the ibm,client-architecture-support stage.
The full list is:
* libnet: Fix the check of the argument lengths of the "ping" command
* fdt: Update phandles after H_CAS
* rtas: Reserve space for FWNMI log
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently we fail to boot a qemu powernv machine with a Power9
processor:
PLAT: Detected generic platform
PLAT: Detected BMC platform generic
CPU: All 1 processors called in...
CHIPTOD: Unknown TOD type !
CHIPTOD: Failed ChipTOD detection !
Aborting!
With v6.4 we can boot both a Power8 and Power9 powernv machine.
Built from submodule with powerpc64le-linux-gnu-gcc (Debian 8.3.0-2).
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20190718054218.9581-1-joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The only change that SLOF does not rely on QEMU providing an RTAS blob
and provides one itself:
https://git.qemu.org/?p=SLOF.git;a=commitdiff;h=5e4ed1fd0f39e
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add OpenSBI version 0.4 as a git submodule and as a prebult binary.
OpenSBI (https://github.com/riscv/opensbi) aims to provide an open-source
reference implementation of the RISC-V Supervisor Binary Interface (SBI)
specifications for platform-specific firmwares executing in M-mode. For all
supported platforms, OpenSBI provides several runtime firmware examples.
These example firmwares can be used to replace the legacy riscv-pk bootloader
and enable the use of well-known bootloaders such as U-Boot.
OpenSBI is distributed under the terms of the BSD 2-clause license
("Simplified BSD License" or "FreeBSD License", SPDX: BSD-2-Clause). OpenSBI
source code also contains code reused from other projects desribed here:
https://github.com/riscv/opensbi/blob/master/ThirdPartyNotices.md.
In this case all of the code we are using from OpenSBI is BSD 2-clause
as we aren't using the Kendryte code (Apache-2.0) with QEMU and libfdt
is dual licensed as BSD 2-clause (and GPL-2.0+). OpenSBI isn't being
linked with QEMU either it is just being included with QEMU.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This only has a fix for ipv4-after-ipv6 booting problem.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Here's my next pull request for qemu-4.1. I'm not sure if this will
squeak in just before the soft freeze, or just after. I don't think
it really matters - most of this is bugfixes anyway. There's some
cleanups which aren't stictly bugfixes, but which I think are safe
enough improvements to go in the soft freeze. There's no true feature
work.
Unfortunately, I wasn't able to complete a few of my standard battery
of pre-pull tests, due to some failures that appear to also be in
master. I'm hoping that hasn't missed anything important in here.
Highlights are:
* A number of fixe and cleanups for the XIVE implementation
* Cleanups to the XICS interrupt controller to fit better with the new
XIVE code
* Numerous fixes and improvements to TCG handling of ppc vector
instructions
* Remove a number of unnnecessary #ifdef CONFIG_KVM guards
* Fix some errors in the PCI hotplug paths
* Assorted other fixes
-----BEGIN PGP SIGNATURE-----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=QAyU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190702' into staging
ppc patch queue 2019-07-2
Here's my next pull request for qemu-4.1. I'm not sure if this will
squeak in just before the soft freeze, or just after. I don't think
it really matters - most of this is bugfixes anyway. There's some
cleanups which aren't stictly bugfixes, but which I think are safe
enough improvements to go in the soft freeze. There's no true feature
work.
Unfortunately, I wasn't able to complete a few of my standard battery
of pre-pull tests, due to some failures that appear to also be in
master. I'm hoping that hasn't missed anything important in here.
Highlights are:
* A number of fixe and cleanups for the XIVE implementation
* Cleanups to the XICS interrupt controller to fit better with the new
XIVE code
* Numerous fixes and improvements to TCG handling of ppc vector
instructions
* Remove a number of unnnecessary #ifdef CONFIG_KVM guards
* Fix some errors in the PCI hotplug paths
* Assorted other fixes
# gpg: Signature made Tue 02 Jul 2019 07:07:15 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.1-20190702: (49 commits)
spapr/xive: Add proper rollback to kvmppc_xive_connect()
ppc/xive: Fix TM_PULL_POOL_CTX special operation
ppc/pnv: Rework cache watch model of PnvXIVE
ppc/xive: Make the PIPR register readonly
ppc/xive: Force the Physical CAM line value to group mode
spapr/xive: simplify spapr_irq_init_device() to remove the emulated init
spapr/xive: rework the mapping the KVM memory regions
spapr_pci: Unregister listeners before destroying the IOMMU address space
target/ppc: improve VSX_FMADD with new GEN_VSX_HELPER_VSX_MADD macro
target/ppc: decode target register in VSX_EXTRACT_INSERT at translation time
target/ppc: decode target register in VSX_VECTOR_LOAD_STORE_LENGTH at translation time
target/ppc: introduce GEN_VSX_HELPER_R2_AB macro to fpu_helper.c
target/ppc: introduce GEN_VSX_HELPER_R2 macro to fpu_helper.c
target/ppc: introduce GEN_VSX_HELPER_R3 macro to fpu_helper.c
target/ppc: introduce GEN_VSX_HELPER_X1 macro to fpu_helper.c
target/ppc: introduce GEN_VSX_HELPER_X2_AB macro to fpu_helper.c
target/ppc: introduce GEN_VSX_HELPER_X2 macro to fpu_helper.c
target/ppc: introduce separate generator and helper for xscvqpdp
target/ppc: introduce GEN_VSX_HELPER_X3 macro to fpu_helper.c
target/ppc: introduce separate VSX_CMP macro for xvcmp* instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At the moment the rtas's Makefile uses generic QEMU rules which means
that when QEMU is compiled on a little endian system, the spapr-rtas.bin
is compiled as little endian too which is incorrect as it is always
executed in big endian mode.
This enforces -mbig by defining %.o:%.S rule as spapr-rtas.bin is
a standalone guest binary which should not depend on QEMU flags anyway.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20190612020723.96802-1-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Built from master (commit 6e56ed129c9782ba050a5fbfbf4ac12335b230f7),
which has ati vgabios support merged (checkout master branch in
roms/seabios submodule, then run "make -C roms seavgabios-ati").
Temporary exception until the next seabios major version is
released (probably 1.13, fall 2019).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190620151104.2678-3-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Refresh the "pc-bios/README" file with edk2, OpenSSL, and Berkeley
SoftFloat release info, matching the edk2-stable201905 firmware images
added in the previous patch.
Cc: Philippe Mathieu-Daud <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1831477
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Rebuild the pc-bios/edk2-*.fd.bz2 binaries, and regenerate
pc-bios/edk2-licenses.txt, based on the edk2-stable201905 release.
Cc: Philippe Mathieu-Daud <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1831477
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Newer versions of zipl have the ability to write signature entries to the boot
script for secure boot. We don't yet support secure boot, but we need to skip
over signature entries while reading the boot script in order to maintain our
ability to boot guest operating systems that have a secure bootloader.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <1556543381-12671-1-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
atoui() and get_index() pass char values to isdigit(). With a
standard isdigit(), we'd get undefined behavior when the value is
negative. Can't happen as char is unsigned on s390x. Even if it
ould, we're actually using isdigit() from pc-bios/s390-ccw/libc.h
here, which works fine for negative values. Clean up anyway, just
to avoid setting a bad example.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190418145355.21100-6-armbru@redhat.com>
[thuth: updated the commit message]
Signed-off-by: Thomas Huth <thuth@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=tJvv
-----END PGP SIGNATURE-----
Merge tag 's390-ccw-bios-2019-04-12' into s390-next-staging
Support for booting from a vfio-ccw passthrough dasd device
# gpg: Signature made Fri 12 Apr 2019 01:17:03 PM CEST
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
* tag 's390-ccw-bios-2019-04-12':
pc-bios/s390: Update firmware images
s390-bios: Use control unit type to find bootable devices
s390-bios: Support booting from real dasd device
s390-bios: Add channel command codes/structs needed for dasd-ipl
s390-bios: Use control unit type to determine boot method
s390-bios: Refactor virtio to run channel programs via cio
s390-bios: Factor finding boot device out of virtio code path
s390-bios: Extend find_dev() for non-virtio devices
s390-bios: cio error handling
s390-bios: Support for running format-0/1 channel programs
s390-bios: ptr2u32 and u32toptr
s390-bios: Map low core memory
s390-bios: Decouple channel i/o logic from virtio
s390-bios: Clean up cio.h
s390-bios: decouple common boot logic from virtio
s390-bios: decouple cio setup from virtio
s390 vfio-ccw: Add bootindex property and IPLB data
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Update the README file with information on the images added previously,
and provide firmware descriptor documents that conform to
"docs/interop/firmware.json".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Add the files built by the last patch: (compressed) binaries, and the
cumulative license text that covers them.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
s390-ccw.img contains support for booting from vfio-ccw dasd passthrough
devices now, and s390-netboot.img is updated since there were changes
to the code that is shared between s390-ccw.img and s390-netboot.img.
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the user does not specify which device to boot from then we end
up guessing. Instead of simply grabbing the first available device let's
be a little bit smarter and only choose devices that might be bootable
like disk, and not console devices.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <1554388475-18329-17-git-send-email-jjherne@linux.ibm.com>
[thuth: Added fix for virtio_is_supported() not being called anymore]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Allows guest to boot from a vfio configured real dasd device.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-16-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The dasd IPL procedure needs to execute a few previously unused
channel commands. Let's define them and their associated data
structures.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-15-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The boot method is different depending on which device type we are
booting from. Let's examine the control unit type to determine if we're
a virtio device. We'll eventually add a case to check for a real dasd device
here as well.
Since we have to call enable_subchannel() in main now, might as well
remove that call from virtio.c : run_ccw(). This requires adding some
additional enable_subchannel calls to not break calls to
virtio_is_supported().
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-14-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we have a Channel I/O library let's modify virtio boot code to
make use of it for running channel programs.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-13-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Make a new routine find_boot_device to locate the boot device for all
cases, not just virtio.
The error message for the case where no boot device has been specified
and a suitable boot device cannot be auto detected was specific to
virtio devices. We update this message to remove virtio specific wording.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-12-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We need a method for finding the subchannel of a dasd device. Let's
modify find_dev to handle this since it mostly does what we need. Up to
this point find_dev has been specific to only virtio devices.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-11-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add verbose error output for when unexpected i/o errors happen. This eases the
burden of debugging and reporting i/o errors. No error information is printed
in the success case, here is an example of what is output on error:
cio device error
ssid : 0x0000000000000000
cssid : 0x0000000000000000
sch_no: 0x0000000000000000
Interrupt Response Block Data:
Function Ctrl : [Start]
Activity Ctrl : [Start-Pending]
Status Ctrl : [Alert] [Primary] [Secondary] [Status-Pending]
Device Status : [Unit-Check]
Channel Status :
cpa=: 0x000000007f8d6038
prev_ccw=: 0x0000000000000000
this_ccw=: 0x0000000000000000
Eckd Dasd Sense Data (fmt 32-bytes):
Sense Condition Flags :
Residual Count =: 0x0000000000000000
Phys Drive ID =: 0x000000000000009e
low cyl address =: 0x0000000000000000
head addr & hi cyl =: 0x0000000000000000
format/message =: 0x0000000000000008
fmt-dependent[0-7] =: 0x0000000000000004
fmt-dependent[8-15]=: 0xe561282305082fff
prog action code =: 0x0000000000000016
Configuration info =: 0x00000000000040e0
mcode / hi-cyl =: 0x0000000000000000
cyl & head addr [0]=: 0x0000000000000000
cyl & head addr [1]=: 0x0000000000000000
cyl & head addr [2]=: 0x0000000000000000
The Sense Data section is currently only printed for ECKD DASD.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-10-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Introduce a library function for executing format-0 and format-1
channel programs and waiting for their completion before continuing
execution.
Add cu_type() to channel io library. This will be used to query control
unit type which is used to determine if we are booting a virtio device or a
real dasd device.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <1554388475-18329-9-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Introduce inline functions to convert between pointers and unsigned 32-bit
ints. These are used to hide the ugliness required to avoid compiler
warnings.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-8-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Create a new header for basic architecture specific definitions and add a
mapping of low core memory. This mapping will be used by the real dasd boot
process.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-7-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Create a separate library for channel i/o related code. This decouples
channel i/o operations from virtio and allows us to make use of them for
the real dasd boot path.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-6-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add proper typedefs to all structs and modify all bit fields to use consistent
formatting.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-5-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Create a boot_setup function to handle getting boot information from
the machine/hypervisor. This decouples common boot logic from the
virtio code path and allows us to make use of it for the real dasd boot
scenario.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-4-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Move channel i/o setup code out to a separate function. This decouples cio
setup from the virtio code path and allows us to make use of it for booting
dasd devices.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-3-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Report machine checks to the kernel.
It is now using these for probing missing devices.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It includes better support for POWER9 processor and the QEMU platform.
DD1.0 workarounds have been removed which simplifies a bit the XIVE
PowerNV model.
Built from submodule.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190310175338.22266-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Pick up the config updates. Also add a few keys to the maps which
got a QKeyCode assigned since the last time we generated the maps
(Hiragana_Katakana, Muhenkan). Sync with xkbcommon updates.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190315110248.29208-3-kraxel@redhat.com
The reverse keymap code can't handle dead keys. So use the nodeadkeys
variant of the keyboard layout for the german and french maps.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190315110248.29208-2-kraxel@redhat.com
This patch fixes two issues in the hppa/parisc emulation:
1. The CPU HPA was wrong in the sense that we had negative module
offsets in the firmware-internal module table (which we ignored up to
now). Get it correct by changing the CPU HPA to 0xfffb0000 which is
greater than the DINO_HPA of 0xfff80000.
This change requires the seabios-firmware update.
2. Sven noticed that the FPU register cr10 is only able to reference up
to 8 FPUs, so let's reduce the maximum amount of SMP CPUs too.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20190315164130.GA7800@ls3530>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Quite a while has passed since we last updated U-Boot for e500. This patch
bumps it to the last released version 2019.01 to make sure users don't feel
like they're using out of date software.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-Id: <20190304103930.16319-1-agraf@csgraf.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
some versions of HP-UX 10.20 seems to rely on the fact that DINO
strips out the lower 2 bits of the PCI configuration address.
Also update the binary SeaBIOS distributed to the latest version
from Helge's repository, which is required with that change.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190218183314.20157-1-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If we found initrd through fw_cfg, we can load it and use the
first module of hvm_start_info to pass initrd address and size
to the kernel.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Based-on: <1547554687-12687-1-git-send-email-liam.merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new pvh.bin option rom can be used with SeaBIOS to boot
uncompressed kernel using the x86/HVM direct boot ABI.
pvh.S contains the entry point of the option rom. It runs
in real mode, loads the e820 table querying the BIOS, and
then it switches to 32bit protected mode and jumps to the
pvh_load_kernel() written in pvh_main.c.
pvh_load_kernel() loads the cmdline and kernel entry_point
using fw_cfg, then it looks for RSDP, fills the
hvm_start_info required by x86/HVM ABI, and finally jumps
to the kernel entry_point.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
In order to allow other option roms to use these common
useful functions and definitions, this patch put them
in two new C header files called optrom.h and
optrom_fw_cfg.h. We also add useful out*() in*()
functions for different size, and new fw_cfg functions
to use when DMA feature is not available.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
FW_CFG_DMA_CTL_* bits and struct fw_cfg_dma_access are
defined in the qemu_fw_cfg.h header file already included
in linuxboot_dma.c, so we can remove the definition of
BIOS_CFG_DMA_CTL_* and struct FWCfgDmaAccess.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Based-on: <1547554687-12687-1-git-send-email-liam.merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This update to qemu_vga.ndrv includes the following changes:
- Build guest resolution list from QEMU EDID data if enabled
- Fixes to re-enable 256 color mode
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This includes spapr-vio and usb-storage fixes, phandles fix for NVLink2
pass through support and other compile improvements.
The full list of changes is:
* vio-vscsi: Support multiple channels / buses
* board-qemu/slof/vio-vscsi: Scan up to 64 SCSI IDs
* usb/storage: Implement block write support
* usb/storage: Invert the logic of the IF-statements
* fdt: Fix phandles for NVLink/NVLink2
* fdt: Factor out code to replace a phandle in place
* pci: use appropriate base class ids
* Makefile: Set a proper DRIVER_NAME when building from a git tree
* romfs/tools: Silence more compiler warnings with GCC 8.1
* romfs/tools: Silence GCC 8.1 compiler warning with FLASHFS_MAGIC
* romfs/tools: Remove superfluous union around the rom header struct
* make.rules: Compile SLOF with -fno-asynchronous-unwind-tables
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
git shortlog ipxe-qemu-20170717-0600d3ae94-0..ipxe-qemu-20190122-de4565cbe7-0
-----------------------------------------------------------------------------
Aaron Young (1):
[libc] Fix strcmp()/strncmp() to return proper values
Ameer Mahagneh (1):
[golan] Set log_max_qp to 1
Bruce Rogers (1):
[build] Disable gcc stringop-truncation warnings
Christian Hesse (1):
[build] Handle R_X86_64_PLT32 from binutils 2.31
Hannes Reinecke (1):
[iscsi] Parse IPv6 address in root path
Heinrich Schuchardt (2):
[efi] Accept (and ignore) R_ARM_V4BX relocations
[efi] Add support for R_ARM_REL32 relocations
Ignat Korchagin (1):
[efi] Fix error handling path in efi_snp_probe
Janos Mattyasovszky (1):
[intel] Add PCI device ID for X550-T2
Joseph Wong (1):
[tg3] Add support for SerDes PHY initialization
Ladi Prosek (1):
[crypto] Fail fast if cross-certificate source is empty
Laurent Gourvénec (1):
[acpi] Compute and check checksum for ACPI tables
Martin Habets (2):
[netdevice] Make netdev_irq_enabled() independent of netdev_irq_supported()
[sfc] Add support for X25xx adapters
Michael Brown (88):
[efi] Enumerate PCI BARs in same order as SnpDxe
[build] Conditionalise use of -mabi=lp64 for ARM64 builds
[build] Fix use of inline assembly on GCC 4.8 ARM64 builds
[build] Fix ARM32 EFI builds with current EDK2 headers
[acpi] Fix spurious uninitialised-variable warning on some gcc versions
[hyperv] Do not steal ownership from the Gen 2 UEFI firmware
[shell] Enable "shell" command even when BANNER_TIMEOUT is zero
[romprefix] Avoid unaligned accesses within ROM headers
[malloc] Avoid false positive warnings from valgrind
[linux] Impose receive quota on tap driver
[efi] Raise TPL when calling UNDI entry point
[netdevice] Cancel all pending transmissions on any transmit error
[monojob] Check for job progress only once per timer tick
[job] Allow jobs to report an arbitrary status message
[downloader] Allow underlying downloads to provide detailed job progress
[monojob] Display job status message, if present
[peerdist] Gather and report peer statistics during download
[netdevice] Add "hwaddr" setting
[resolv] Use pass-through interfaces for name resolution multiplexer
[dns] Report current DNS query as job progress status message
[efi] Check buffer length for packets retrieved via our SNP protocol
[efi] Match behaviour of SnpDxe for truncated received packets
[dns] Ensure DNS names are NUL-terminated when used as diagnostic strings
[efi] Continue to connect remaining handles after connection errors
[build] Exclude selected directories from Secure Boot builds
[efi] Inhibit our driver Start() method during disconnection attempts
[efi] Allow for building with older versions of elf.h system header
[crypto] Fix endianness typo in comment
[crypto] Eliminate repetitions in MD5 round constant table
[crypto] Add MD4 message digest algorithm
[ntlm] Add support for NTLM authentication mechanism
[http] Gracefully handle offers of multiple authentication schemes
[http] Handle parsing of WWW-Authenticate header within authentication scheme
[http] Add support for NTLM authentication
[xen] Skip probing of any unsupported device types
[http] Include error messages for 4xx and 5xx response codes
[http] Report unsuccessful response status lines at DBGVL_LOG
[image] Omit URI query string and fragment from download progress messages
[legal] Add missing FILE_LICENCE declarations
[legal] Add missing FILE_LICENCE declarations
[build] Avoid use of "ld --oformat binary"
[ena] Add driver for Amazon ENA virtual function NIC
[skel] Remove MII interface
[ena] Fix spurious uninitialised variable warning on older versions of gcc
[xhci] Assume an invalid PSI table if any invalid PSI value is observed
[intel] Work around broken reset mechanism in i219 devices
[http] Allow for domain names within NTLM user names
[xhci] Consume event TRB before reporting completion to USB core
[efi] Run at TPL_CALLBACK to protect against UEFI timers
[efi] Raise TPL within EFI_SIMPLE_NETWORK_PROTOCOL entry points
[efi] Raise TPL within EFI_USB_IO_PROTOCOL entry points
[process] Include process name in debug messages
[efi] Drop to TPL_APPLICATION when gathering entropy
[efi] Raise TPL within EFI_DRIVER_BINDING_PROTOCOL entry points
[librm] Add facility to provide register and stack dump for CPU exceptions
[golan] Do not assume all devices are identical
[lacp] Mark link as blocked if partner is not yet up and running
[lacp] Fix debug message to match documentation
[tftp] Prevent potential division by zero
[profile] Prevent potential division by zero
[ocsp] Centralise test for whether or not an OCSP check is required
[ocsp] Allow OCSP checks to be disabled
[lacp] Check the partner's own state when checking for blocked links
[efi] Provide Map_Mem() and associated UNDI callbacks
[time] Add support for the ACPI power management timer
[rng] Use fixed-point calculations for min-entropy quantities
[build] Prevent use of MMX and SSE registers
[undi] Treat invalid IRQ numbers as non-fatal errors
[librm] Provide symbols for inline code placed into other sections
[librm] Ensure that inline code symbols are unique
[tls] Ensure received data list is initialised before calling tls_free()
[list] Add list_is_first_entry() and list_is_last_entry()
[tls] Rename tls_session to tls_connection
[tls] Ensure that window change is propagated to plainstream interface
[efi] Release SNP devices before starting SAN boot image
[efi] Do not raise TPL within EFI_DRIVER_BINDING_PROTOCOL.Supported()
[undi] Include subsystem IDs in broken interrupt device check
[rhine] Fix usage of mii_read()
[velocity] Fix usage of mii_read() and mii_write()
[mii] Separate concepts of MII interface and MII device
[tcp] Add missing packed attribute on struct tcp_header
[mii] Fix typo in parameter name
[http] Work around stateful authentication schemes
[build] Use positive-form tests when checking for supported warnings
[rndis] Clean up error handling path in register_rndis()
[ethernet] Use standard 1500 byte MTU unless explicitly overridden
[intelxl] Add driver for Intel 40 Gigabit Ethernet NICs
[zbin] Fix compiler warning with GCC 9
Peter von Konigsmark (2):
[exanic] Power up optical PHYs (if present)
[exanic] Add PCI device ID for another X40 variant
Petr Borsodi (3):
[pci] Correct invalid base-class/sub-class/prog-if order in PCIR
[util] Improve processing of ROM images in Option::ROM
[util] Add support for EFI ROM images
Richard Moore (1):
[intel] Add various PCI device IDs
Rob Taglang (3):
[intel] Add PCI_ROM entry for Intel i354 NIC
[intelx] Add PCI_ROM entry for Intel X553 NIC
[efi] Exclude link-layer header length from MaxPacketSize
Robin Smidsrød (1):
[util] Support reversed sort ordering when generating NIC list
Roman Kagan (2):
[rndis] Register netdev with MAC filled
[vmbus] Do not expect version in version_response
Steven Haber (1):
[intelx] Add support for Intel X552 NIC
Sylvie Barlow (3):
[mii] Add mii_find()
[mii] Add bit-bashing interface
[icplus] Add driver for IC+ network card
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QEMU currently installs logos to $prefix/share/qemu/ which means no GUI
toolkit or applications can find them by default.
The accepted standards for desktop applications declare that application
logos / icons should be installed under $prefix/share/icons, so use this
directory location.
Pre-rendered icons are provided at the standard sizes expected for GUI
applications, along with the scalable SVG, to ensure maximum portability.
The PNGs are rendered from the SVG using inkscape, however, this is not
wired up into the default make rules to avoid requiring inkscape as a
mandatory tool in build systems / developer workstations.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190110120047.25369-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When compiling the s390-ccw firmware with Clang 7.0.1, I get the
following errors:
pc-bios/s390-ccw/start.S:62:19: error: invalid use of length addressing
stctg 0,0,0(15)
^
pc-bios/s390-ccw/start.S:63:12: error: invalid use of length addressing
oi 6(15), 0x2
^
pc-bios/s390-ccw/start.S:64:19: error: invalid use of length addressing
lctlg 0,0,0(15)
^
pc-bios/s390-ccw/start.S:76:19: error: invalid use of length addressing
stctg 0,0,0(15)
^
pc-bios/s390-ccw/start.S:77:12: error: invalid use of length addressing
ni 6(15), 0xfd
^
pc-bios/s390-ccw/start.S:78:19: error: invalid use of length addressing
lctlg 0,0,0(15)
^
pc-bios/s390-ccw/start.S:79:12: error: invalid operand for instruction
br 14
^
Let's use proper register names like in the rest of this file to fix it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1547123559-30476-1-git-send-email-thuth@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Copy the content into the sl and sv files (the only ones left which are
not generated by qemu-keymap).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-4-kraxel@redhat.com
It doesn't define any keys, only includes "common".
Which makes it effectively an "en-us" map.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-3-kraxel@redhat.com
"common" is the only file using it, so we can just include it directly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-2-kraxel@redhat.com
Seabios 1.12 has been released yesterday. Update
our snapshot builds to the final release.
git shortlog
============
Kevin O'Connor (2):
shadow: Rework bios copy code to prevent gcc array-bounds warning
docs: Note v1.12.0 release
Shmuel Eiderman (1):
pvscsi: Scan all 64 possible targets
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When you clone the repository without previous commit history, 'git://'
doesn't protect from man-in-the-middle attacks. HTTPS is more secure
since the client verifies the server certificate.
Cc: Richard Henderson <rth@twiddle.net>
Suggested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181108111531.30671-8-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When you clone the repository without previous commit history, 'git://'
doesn't protect from man-in-the-middle attacks. HTTPS is more secure
since the client verifies the server certificate.
Suggested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181108111531.30671-6-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When you clone the repository without previous commit history, 'git://'
doesn't protect from man-in-the-middle attacks. HTTPS is more secure
since the client verifies the server certificate.
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20181108111531.30671-2-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
seabios 1.12 release is planned for november.
update seabios to a master branch snapshot so it gets more testing
and to make the delta smaller when updating to -final during freeze.
git shortlog rel-1.11.2..14221cd86e
===================================
Gerd Hoffmann (12):
optionrom: enable non-vga display devices
cbvga: factor out cbvga_setup_modes()
qemu: add bochs-display support
cbvga_setup_modes: use real mode number instead of 0x140
cbvga_list_modes: don't list current mode twice
cbvga_set_mode: disable clearmem in windows x86 emulator.
bochs_display_setup: return error on failure
pmm: use tmp zone on oom
vgasrc: add allocate_pmm()
qemu: add qemu ramfb support
cbvga_set_mode: refine clear display logic
pretty boot menu entry for cdrom drives
Jing Liu (3):
pci: fix the return value for truncated capability
pci: clean up the debug message for pci capability found
pci: recognize RH PCI legacy bridge resource reservation capability
Kevin O'Connor (8):
docs: Add sercon-port to Runtime_config.md documentation
paravirt: Only enable sercon in NOGRAPHIC mode if no other console specified
shadow: Don't invoke a shutdown on reboot unless in a reboot loop
build: Use git describe --always
docs: Update Download.md to use git clone via https
ssdt: Fix building of legacy acpi tables on current iasl compiler
docs: Update download file link
sdcard: Increase SDHCI_POWER_ON_TIME to 5ms
Marc-André Lureau (4):
x86: add readq()
tpm: generalize init_timeout()
tpm: use get_tpm_version() callback
tpm: add TPM CRB device support
Marcel Apfelbaum (1):
pci: fix 'io hints' capability for RedHat PCI bridges
Matt DeVillier (2):
nvme: fix I/O queue length calculation overflow
SeaVGABios/cbvga: Fix bpp for coreboot framebuffer
Nikolay Nikolov (11):
floppy: Introduce the floppy_dor_read() function
floppy: Introduce floppy_dor_mask()
floppy: Introduce FLOPPY_DOR_XXX constants
floppy: Preserve motor and drive sel bits when resetting the floppy controller
floppy: Reset the floppy motor count in floppy_drive_pio()
floppy: Use timer_check() in floppy_wait_irq()
floppy: hold the DOR reset bit low for 4 microseconds, when resetting
floppy: Execute a SPECIFY command after sensing the media type
floppy: Support up to 4 floppy drives when turning on the floppy motor
floppy: Wait for the floppy motor to reach a stable speed, after starting
floppy: Send 4 sense interrupt commands during controller initialization
Paul Menzel (1):
docs/Download: Use more secure HTTPS URLs where possible
Stefan Berger (5):
tpm: Add support for TPM2 ACPI table
tpm: Wait for tpmRegValidSts flag on CRB interface before probing
tpm: revert return values for successful/failed CRB probing
tpm: when CRB is active, select, lock it, and check addresses
tpm: Request access to locality 0
Stephen Douthit (3):
tpm: Refactor duplicated wait code in tis_wait_sts() & crb_wait_reg()
tpm: Wait for interface startup when probing
tpm: Handle unimplemented TIS_REG_IFACE_ID in tis_get_tpm_version()
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These files can not be executed on the host, so they should not be
marked as executable.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlt+5OYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPtxwf8CQM/F+0L+EKeYfYcVgVZsDhhOkLj
Pm61q0bZsWKLby5jCqIDYw7Z/vodJnSS1DO0slIRoXxvQ9DwlkbBnBy/aG/E9U0q
WF1vbCezibDIt7sGcsu9F5zXU9eqe+E6dZfxFrv8FQSOFVxn34TfeJagWLCtzg0d
LnVTF/e4zJD8IQiM7w6lJQxua3fz13ssPEg2KnMkguDhACMwvZ/K/cA2AJkHRMhY
sroPMwLHlrF1NOoeCIrWxYUmSGCRCAy1DmiPGiiSs0yBq/dL0UkAa5Eu6HMQ7rgI
zUff3JDmzEjixUSIEbpVRN+yPCN0/ACSOpJUrKLDxXbc4nZ+PBQ04YpyPQ==
=UZiV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* x86 TCG fixes for 64-bit call gates (Andrew)
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)
# gpg: Signature made Thu 23 Aug 2018 17:46:30 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
KVM: cleanup unnecessary #ifdef KVM_CAP_...
target/i386: update MPX flags when CPL changes
i2c: pm_smbus: Add the ability to force block transfer enable
i2c: pm_smbus: Don't delay host status register busy bit when interrupts are enabled
i2c: pm_smbus: Add interrupt handling
i2c: pm_smbus: Add block transfer capability
i2c: pm_smbus: Make the I2C block read command read-only
i2c: pm_smbus: Fix the semantics of block I2C transfers
i2c: pm_smbus: Clean up some style issues
pc-dimm: assign and verify the "addr" property during pre_plug
pc: drop memory region alignment check for 0
util/oslib-win32: indicate alignment for qemu_anon_ram_alloc()
pc-dimm: assign and verify the "slot" property during pre_plug
ipmi: Use proper struct reference for BT vmstate
vhost-scsi: expose 't10_pi' property for VIRTIO_SCSI_F_T10_PI
vhost-scsi: unify vhost-scsi get_features implementations
vhost-user-scsi: move host_features into VHostSCSICommon
cpus: allow cpu_get_ticks out of BQL
cpus: protect TimerState writes with a spinlock
seqlock: add QemuLockable support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This includes gcc8.1 fixes and the image is compiled using gcc 8.1 as well.
The full list of changes is:
> Fix bad assembler statements for compiling with gcc 8.1 / as 2.30
> libelf: Add REL32 to the list of ignored relocations
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Update the submodule and u-boot-sam460-20100605.bin to include
following fixes from Sebastian Bauer:
- Fix build with newer gcc
- Decrease unnecessary delay which fixes slow booting from CD
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The changes are:
1. fixed broken_sc1;
2. added switching between boot consoles;
3. added PXE boot.
The full list is:
> lib/libnet/pxelinux: Fix two off-by-one bugs in the pxelinux.cfg parser
> lib/libnet/pxelinux: Make the size handling for pxelinux_load_cfg more logical
> libc: Add a simple implementation of an assert() function
> libnet: Support UUID-based pxelinux.cfg file names
> slof: Add a helper function to get the contents of a property in C code
> libnet: Add support for DHCPv4 options 209 and 210
> libnet: Wire up pxelinux.cfg network booting
> libnet: Add functions for downloading and parsing pxelinux.cfg files
> libnet: Put code for determing TFTP error strings into a separate function
> libc: Add the snprintf() function
> libnet: Pass ip_version via struct filename_ip
> resolve ihandle and xt handle in the input command (like for the output)
> Fix output word
> obp-tftp: Make sure to not overwrite paflof in memory
> libnet: Get rid of unused huge_load and block_size parameters
> libc: Check for NULL pointers in free()
> libc: Implement strrchr()
> libnet: Get rid of unnecessary (char *) casts
> broken_sc1: check for H_PRIVILEGE
> OF: Use new property "stdout-path" for boot console
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- accommodate guests using vfio-ccw without specifying unlimited
prefetch, but actually working fine
- add cpu model for the z14 Model ZR1
- add support for pxelinux.cfg-style network booting to the s390x
firmware
-----BEGIN PGP SIGNATURE-----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=hMax
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180619' into staging
- cleanup in virtio-ccw
- accommodate guests using vfio-ccw without specifying unlimited
prefetch, but actually working fine
- add cpu model for the z14 Model ZR1
- add support for pxelinux.cfg-style network booting to the s390x
firmware
# gpg: Signature made Tue 19 Jun 2018 10:33:06 BST
# gpg: using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20180619:
pc-bios/s390-ccw: Update the s390-netboot.img binary
pc-bios/s390-ccw: Optimize the s390-netboot.img for size
pc-bios/s390-ccw/net: Try to load pxelinux.cfg file accoring to the UUID
pc-bios/s390-ccw/net: Add support for pxelinux-style config files
pc-bios/s390-ccw/net: Update code for the latest changes in SLOF
roms: Update SLOF submodule to current status
pc-bios/s390-ccw: define loadparm length
s390x/cpumodels: add z14 Model ZR1
s390x/ipl: Try to detect Linux vs non Linux for initial IPL PSW
vfio-ccw: remove orb.c64 (64 bit data addresses) check
vfio-ccw: add force unlimited prefetch property
virtio-ccw: clean up notify
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The -O2 optimization flag is passed via CFLAGS to the firmware Makefile,
but in netbook.mak, we've got some rules that only use QEMU_CFLAGS for
compiling the libc and libnet from SLOF, so these files get compiled
without optimization so far. Use CFLAGS here, too, to create faster
and smaller code.
We can additionally save some more bytes in the firmware images by compi-
ling the code with -fno-asynchronous-unwind-tables. This will omit some
ELF sections (used for stack unwinding for example) from the image that
we do not need in the firmware.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
With the STSI instruction, we can get the UUID of the current VM instance,
so we can support loading pxelinux config files via UUID in the file name,
too.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since it is quite cumbersome to manually create a combined kernel with
initrd image for network booting, we now support loading via pxelinux
configuration files, too. In these files, the kernel, initrd and command
line parameters can be specified seperately, and the firmware then takes
care of glueing everything together in memory after the files have been
downloaded. See this URL for details about the config file layout:
https://www.syslinux.org/wiki/index.php?title=PXELINUX
The user can either specify a config file directly as bootfile via DHCP
(but in this case, the file has to start either with "default" or a "#"
comment so we can distinguish it from binary kernels), or a folder (i.e.
the bootfile name must end with "/") where the firmware should look for
the typical pxelinux.cfg file names, e.g. based on MAC or IP address.
We also support the pxelinux.cfg DHCP options 209 and 210 from RFC 5071.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The ip_version information now has to be stored in the filename_ip_t
structure, and there is now a common function called tftp_get_error_info()
which can be used to get the error string for a TFTP error code.
We can also get rid of some superfluous "(char *)" casts now.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Loadparm is defined by the s390 architecture to be 8 bytes
in length. Let's define this size in the s390-ccw bios.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
I've run into a compilation error today with the current version of GCC 8:
In file included from s390-ccw.h:49,
from main.c:12:
cio.h:128:1: error: alignment 1 of 'struct tpi_info' is less than 4 [-Werror=packed-not-aligned]
} __attribute__ ((packed));
^
cc1: all warnings being treated as errors
Since the struct tpi_info contains an element ("struct subchannel_id schid")
which is marked as aligned(4), we've got to mark the struct tpi_info as
aligned(4), too.
CC: qemu-stable@nongnu.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525774672-11913-1-git-send-email-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390-ccw.img contains fixes for the boot menu, and s390-netboot.img
contains the support for .INS files and the patch for resetting the
machine with diag308.
Signed-off-by: Thomas Huth <thuth@redhat.com>
We currently pass an integer as the subcode parameter. However,
the upper bits of the register containing the subcode need to
be 0, which is not guaranteed unless we explicitly specify the
subcode to be an unsigned long value.
Fixes: d046c51dad ("pc-bios/s390-ccw: Get device address via diag 308/6")
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The .INS config files can normally be found on CD-ROM ISO images,
so by supporting these files, it is now possible to boot directly
when the TFTP server is set up with the contents of such an CD-ROM
image.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The netboot firmware so far simply jumped directly into the OS kernel
after the download has been completed. This, however, bears the risk
that the virtio-net device still might be active in the background and
incoming packets are still placed into the buffers - which could destroy
memory of the now-running Linux kernel in case it did not take over the
device fast enough. Also the SCLP console is not put into a well-defined
state here. We should hand over the system in a clean state when jumping
into the kernel, so let's use the same mechanism as it's done in the
main s390-ccw firmware and reset the machine with diag308 into a clean
state before jumping into the OS kernel code. To be able to share the
code with the main s390-ccw firmware, the related functions are now
extracted from bootmap.c into a new file called jump2ipl.c.
Since we now also set the boot device schid at address 184 for the network
boot device, this patch also slightly changes the way how we detect the
entry points for non-ELF binary images: The code now looks for the "S390EP"
magic first and then jumps to 0x10000 in case it has been found. This is
necessary for booting from network devices, since the normal kernel code
(where the PSW at ddress 0 points to) tries to do a block load from the
boot device. This of course fails for a virtio-net device and causes the
kernel to abort with a panic-PSW silently.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When we want to support pxelinux-style network booting later, we've got
to do several TFTP transfers - and we do not want to apply for a new IP
address via DHCP each time. So split up net_load into three parts:
1. net_init(), which initializes virtio-net, gets an IP address via DHCP
and prints out the related information.
2. The tftp_load call is now moved directly into the main() function
3. A new net_release() function which should tear down the network stack
before we are done in the firmware.
This will make it easier to extend the code in the next patches.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
zIPL boot menu entries can be non-sequential. Let's account
for this issue for the s390 enumerated boot menu. Since we
can no longer print a range of available entries to the
user, we have to present a list of each available entry.
An example of this menu:
s390-ccw Enumerated Boot Menu.
[0] default
[1]
[2]
[7]
[8]
[9]
[11]
[12]
Please choose:
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
