Commit Graph

14066 Commits

Author SHA1 Message Date
Amit Shah
2d6c1ef40f char: Prevent multiple devices opening same chardev
Prevent:

-chardev socket,path=/tmp/foo,server,nowait,id=c0 \
-device virtserialport,chardev=c0,id=vs0 \
-device virtserialport,chardev=c0,id=vs1

Reported-by: Mike Cao <bcao@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-03-21 16:57:13 +05:30
Amit Shah
f9a90f189c virtio-console: Keep chardev open for other users after hot-unplug
After a hot-unplug operation, the previous behaviour was to close the
chardev.  That meant the chardev couldn't be re-used.  Also, since
chardev hot-plug isn't possible so far, this means virtio-console
hot-plug isn't feasible as well.

With this change, the chardev is kept around.  A new virtio-console
channel can then be hot-plugged with the same chardev and things will
continue to work.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-03-21 16:56:55 +05:30
Amit Shah
fee063c07f virtio-serial: Don't clear ->have_data() pointer after unplug
After a port unplug operation, the port->info->have_data() pointer was
set to NULL.  The problem is, the ->info struct is shared by all ports,
effectively disabling writes to other ports.

Reported-by: juzhang <juzhang@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-03-21 16:55:12 +05:30
Amit Shah
e9b382b017 virtio-serial-bus: Simplify handle_output() function
There's no code change, just re-arrangement to simplify the function
after recent modifications.

Reported-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-03-21 16:55:12 +05:30
Amit Shah
32059220d0 virtio-serial: Enable ioeventfd
Enable ioeventfd for virtio-serial devices by default.  Commit
25db9ebe15 lists the benefits of using
ioeventfd.

Copying a file from guest to host over a virtio-serial channel didn't
show much difference in time or io_exit rate.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-03-21 16:55:12 +05:30
Amit Shah
0b8b716d6c virtio-serial: Disallow generic ports at id 0
Port 0 is reserved for virtconsole devices for backward compatibility
with the old -virtioconsole (from qemu 0.12) device type.

libvirt prior to commit 8e28c5d40200b4c5d483bd585d237b9d870372e5 used
port 0 for generic ports.  libvirt will no longer do that, but disallow
instantiating generic ports at id 0 from qemu as well.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-03-21 16:55:11 +05:30
Amit Shah
6b331efb73 virtio-serial: Use a struct to pass config information from proxy
Instead of using a single variable to pass to the virtio_serial_init
function, use a struct so that expanding the number of variables to be
passed on later is easier.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-03-21 16:55:11 +05:30
Stefan Weil
e0efb993b8 Fix conversions from pointer to int and vice versa
Here the int values fds[0], sigfd, s, sock and fd are converted
to void pointers which are later converted back to an int value.

These conversions should always use intptr_t instead of unsigned long.

They are needed for environments where sizeof(long) != sizeof(void *).

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-20 21:39:23 +00:00
Blue Swirl
d81e54de59 petalogix_ml605_mmu: remove unused variable
Remove a write-only variable, spotted by GCC 4.6.0:
/src/qemu/hw/petalogix_ml605_mmu.c: In function 'petalogix_ml605_init':
/src/qemu/hw/petalogix_ml605_mmu.c:153:11: error: variable 'serial' set but not used [-Werror=unused-but-set-variable]

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-19 08:43:22 +00:00
Blue Swirl
44bc10d5bc qemu-thread: delete unused functions
qemu_mutex_timedlock() and qemu_cond_timedwait() are no longer used.

Remove them and their helper timespec_add_ms().

Reported-by: François Revol <revol@free.fr>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-19 08:30:28 +00:00
Stefan Weil
1a290aea8d w32: Add missing functions qemu_mutex_destroy, qemu_cond_destroy
These functions were missing in commit
9257d46d55.

Both functions are needed for compilations with
configuration --enable-vnc-thread.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-19 08:29:35 +00:00
Jan Kiszka
ca22a3a375 i8254: Fix migration from older versions
qdev conversion broke migration as the previous version used vmstate
instance IDs derived from the iobase. Fix it by registering a legacy
alias.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-19 08:29:04 +00:00
Michal Simek
00914b7d97 microblaze: Add PetaLogix ml605 MMU little-endian ref design
Add the first Microblaze little endian platform.
Platform uses uart16550, axi ethernet, timer, intc.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2011-03-16 15:18:58 +01:00
Edgar E. Iglesias
93f1e4016b xilinx: Add AXIENET & DMA models
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2011-03-16 15:18:58 +01:00
Michal Simek
d746ce6dba microblaze: Compile uart 16550 serial driver
Upcomming little endian platform will use 16550 serial driver.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2011-03-16 15:18:58 +01:00
Blue Swirl
ad620c29c2 win32: implement missing timersub
Implement and wrap timersub() for Win32.

Acked-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-15 20:49:56 +00:00
Stefan Hajnoczi
31d3c9b8c1 simpletrace: Move st_init() error reporting
User emulator builds do not have error_report() so it should not be used
by simpletrace.c.  In fact, error reporting inside simpletrace.c is
inappropriate and should be done by the caller instead.

This patch moves st_init() error reporting out to its caller,
vl.c:main().

Reported-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-15 18:03:26 +00:00
Paolo Bonzini
cc015e9a5d add Win32 IPI service
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:22 +00:00
Paolo Bonzini
b55c22c65b protect qemu_cpu_kick_self for Win32
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:22 +00:00
Paolo Bonzini
714bd04090 provide dummy signal init functions for win32
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:22 +00:00
Paolo Bonzini
712ae48084 merge all signal initialization with qemu_signalfd_init, rename
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:22 +00:00
Paolo Bonzini
8cf3f22b77 iothread stops the vcpu thread via IPI
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:22 +00:00
Paolo Bonzini
18a857280d do not use timedwait on qemu_cpu_cond
Whenever env->created becomes true, qemu_cpu_cond is signaled by
{kvm,tcg}_cpu_thread_fn.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:22 +00:00
Paolo Bonzini
be7d6c57c4 do not use timedwait on qemu_pause_cond
all_vcpus_paused can start returning true after penv->stopped changes
from 0 to 1.  When this is done, qemu_pause_cond is always signaled.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:22 +00:00
Paolo Bonzini
e009894f08 do not use timedwait on qemu_system_cond
qemu_main_loop_start is the only place where qemu_system_ready is set
to 1.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:22 +00:00
Paolo Bonzini
9705fbb563 do not use timedwait on qemu_halt_cond
The following conditions can cause cpu_has_work(env) to become true:

- env->queued_work_first: run_on_cpu is already kicking the VCPU

- env->stop = 1: pause_all_vcpus is already kicking the VCPU

- env->stopped = 0: resume_all_vcpus is already kicking the VCPU

- vm_running = 1: vm_start is calling resume_all_vcpus

- env->halted = 0: see previous patch

- qemu_cpu_has_work(env): when it becomes true, board code should set
  env->halted = 0 too.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:22 +00:00
Paolo Bonzini
67bb172f9d always signal pause_cond after stopping a VCPU
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:21 +00:00
Paolo Bonzini
df646dfd56 exit round-robin vcpu loop if cpu->stopped is true
Sometimes vcpus are stopped directly without going through ->stop = 1.
Exit the VCPU execution loop in this case as well.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:21 +00:00
Paolo Bonzini
94ad5b00a3 always qemu_cpu_kick after unhalting a cpu
This ensures env->halt_cond is broadcast, and the loop in
qemu_tcg_wait_io_event and qemu_kvm_wait_io_event is exited
naturally rather than through a timeout.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:21 +00:00
Paolo Bonzini
eda48c344f inline cpu_halted into sole caller
All implementations are now the same, and there is only one caller,
so inline the function there.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:21 +00:00
Paolo Bonzini
38a42e7c52 remove CONFIG_THREAD
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:21 +00:00
Paolo Bonzini
89b48b5681 add assertions on the owner of a QemuMutex
These are already present in the Win32 implementation, add them to
the pthread wrappers as well.  Use PTHREAD_MUTEX_ERRORCHECK for mutex
operations. Later we'll add tracking of the owner for cond_signal/broadcast.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:21 +00:00
Paolo Bonzini
96284e8973 include qemu-thread.h early
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:21 +00:00
Paolo Bonzini
9257d46d55 add win32 qemu-thread implementation
For now, qemu_cond_timedwait and qemu_mutex_timedlock are left as
POSIX-only functions.  They can be removed later, once the patches
that remove their uses are in.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:21 +00:00
Jan Kiszka
b7680cb607 Refactor thread retrieval and check
We have qemu_cpu_self and qemu_thread_self. The latter is retrieving the
current thread, the former is checking for equality (using CPUState). We
also have qemu_thread_equal which is only used like qemu_cpu_self.

This refactors the interfaces, creating qemu_cpu_is_self and
qemu_thread_is_self as well ass qemu_thread_get_self.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:21 +00:00
Paolo Bonzini
68c23e5520 use win32 timer queues
Multimedia timers are only useful for compatibility with Windows NT 4.0
and earlier.  Plus, the implementation in Wine is extremely heavyweight.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:20 +00:00
Paolo Bonzini
cfced5b2e6 implement win32 dynticks timer
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:20 +00:00
Paolo Bonzini
9931b2f4c7 unlock iothread during WaitForMultipleObjects
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:20 +00:00
Stefan Weil
913895ab96 hw/fmopl: Fix buffer access out-of-bounds errors
Index 75 is one too large for AR_TABLE[75], DR_TABLE[75].
This error was reported by cppcheck.

hw/fmopl.c:600: error: Buffer access out-of-bounds: OPL.AR_TABLE
hw/fmopl.c:601: error: Buffer access out-of-bounds: OPL.DR_TABLE

Fix this by limiting the access to the allowed range.
MultiArcadeMachineEmulator has newer versions of fmopl,
but using these requires more efforts.

Cc: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: malc <av1474@comtv.ru>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 13:35:21 +00:00
William Dauchy
7165448a91 moving eeprom initialization
The initialization should not be only on reset but also when initializing
the device.
It resolves a bug when hot plugging a pci network device: the mac address
was always null.

Signed-off-by: William Dauchy <wdauchy@gmail.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 13:24:42 +00:00
Blue Swirl
e14c8062f4 pc: fix wrong CMOS values for floppy drives
Before commit 63ffb564dc, states for
floppy drives were calculated in fdc.c:fd_revalidate(). There it is
also considered whether a disk is inserted or not. The commit didn't copy
the logic completely to pc.c, which caused a regression.

Fix by adding the same check also to pc.c.

Reported-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Tested-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-12 09:52:25 +00:00
Michal Simek
c4374bb753 microblaze: Add PVR for writeback cache, endians
Specify PVR for writeback cache, endians and others.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2011-03-11 15:24:37 +01:00
Michal Simek
73ad9e62a3 microblaze: Fix PetaLogix company name
trivial fix.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2011-03-11 15:24:37 +01:00
Anthony Liguori
98fa4a5932 Merge remote branch 'stefanha/tracing' into staging 2011-03-11 08:03:55 -06:00
Juan Quintela
f6317a6ef1 vmstate: move timers to use test instead of version
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-10 16:12:26 -06:00
Juan Quintela
639f49b60c vmstate: be able to store/save a pci device from a pointer
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-10 16:12:26 -06:00
Juan Quintela
6059631c04 vmstate: Add a way to send a partial array
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-10 16:12:26 -06:00
Juan Quintela
1283da7273 vmstate: add VMSTATE_STRUCT_VARRAY_UINT32
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-10 16:12:26 -06:00
Juan Quintela
15c6a56e95 vmstate: add VMSTATE_INT64_ARRAY
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-10 16:12:26 -06:00
Juan Quintela
2a57b6c893 vmstate: add VMSTATE_STRUCT_VARRAY_INT32
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-10 16:12:26 -06:00