This allows these functions to be used earlier in the file without needing a
separate forward declaration.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
During normal use the cmdfifo will never wrap internally and cmdfifo_cdb_offset
will always indicate the start of the SCSI CDB. However it is possible that a
malicious guest could issue an invalid ESP command sequence such that cmdfifo
wraps internally and cmdfifo_cdb_offset could point beyond the end of the FIFO
data buffer.
Add an extra check to fifo8_peek_buf() to ensure that if the cmdfifo has wrapped
internally then esp_cdb_ready() will exit rather than allow scsi_cdb_length() to
access data outside the cmdfifo data buffer.
Reported-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The esp_cdb_length() function is only used as part of a calculation to determine
whether the cmdfifo contains an entire SCSI CDB. Rework esp_cdb_length() into a
new esp_cdb_ready() function which both enables us to handle the case where
scsi_cdb_length() returns -1, plus simplify the logic for its callers.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The current logic assumes that at least 1 byte is present in the FIFO when
executing a non-DMA SELATNS command, but this may not be the case if the
guest executes an invalid ESP command sequence.
Reported-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Instead of pushing data into the FIFO directly with fifo8_push_all(), add a new
esp_fifo_push_buf() function and use it accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that all users of esp_fifo_pop_buf() operate on the main FIFO there is no
need to pass the FIFO explicitly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
There are still a few places that use fifo8_push() instead of esp_fifo_push() in
order to push a value into the FIFO. Update those places to use esp_fifo_push()
instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that all users of esp_fifo_pop() operate on the main FIFO there is no need
to pass the FIFO explicitly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that all users of esp_fifo_push() operate on the main FIFO there is no need
to pass the FIFO explicitly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The aim is to restrict the esp_fifo_*() functions so that they only operate on
the hardware FIFO. When reading from cmdfifo in do_message_phase() use the
underlying esp_fifo8_pop_buf() function directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The aim is to restrict the esp_fifo_*() functions so that they only operate on
the hardware FIFO. When reading from cmdfifo in do_command_phase() use the
underlying esp_fifo8_pop_buf() function directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Update esp_fifo_pop_buf() to be a simple wrapper onto the new esp_fifo8_pop_buf()
function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
If no bytes are there to process in the message in phase,
the input data latch (s->sidl) is set to s->msg[-1]. Just
do nothing since no DMA is performed.
Reported-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Horizontal pel panning bit 3 is only used in text mode. In graphics
mode, it can be treated as if it was zero, thus not extending the
dirty memory region.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When pel panning is active, one more byte is read from each of the VGA
memory planes. This has to be accounted in the computation of region_end,
otherwise vga_draw_graphic() fails an assertion:
qemu-system-i386: ../system/physmem.c:946: cpu_physical_memory_snapshot_get_dirty: Assertion `start + length <= snap->end' failed.
Reported-by: Helge Konetzka <hk@zapateado.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2244
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the computation of region_start and region_end after the value of
"bits" is known. This makes it possible to distinguish modes that
support horizontal pel panning from modes that do not.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two sets of conditionals using the shift control bits: one to
verify the palette and adjust disp_width, one to compute the "v" and
"bits" variables. Merge them into one, with the extra benefit that
we now have the "bits" value available early and can use it to
compute region_end.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When vhost-user or vhost-kernel is handling virtio net datapath,
QEMU should not touch used ring.
But with vhost-user socket reconnect scenario, in a very rare case
(has pending kick event). VRING_USED_F_NO_NOTIFY is set by QEMU in
following code path:
#0 virtio_queue_split_set_notification (vq=0x7ff5f4c920a8, enable=0) at ../hw/virtio/virtio.c:511
#1 0x0000559d6dbf033b in virtio_queue_set_notification (vq=0x7ff5f4c920a8, enable=0) at ../hw/virtio/virtio.c:576
#2 0x0000559d6dbbbdbc in virtio_net_handle_tx_bh (vdev=0x559d703a6aa0, vq=0x7ff5f4c920a8) at ../hw/net/virtio-net.c:2801
#3 0x0000559d6dbf4791 in virtio_queue_notify_vq (vq=0x7ff5f4c920a8) at ../hw/virtio/virtio.c:2248
#4 0x0000559d6dbf79da in virtio_queue_host_notifier_read (n=0x7ff5f4c9211c) at ../hw/virtio/virtio.c:3525
#5 0x0000559d6d9a5814 in virtio_bus_cleanup_host_notifier (bus=0x559d703a6a20, n=1) at ../hw/virtio/virtio-bus.c:321
#6 0x0000559d6dbf83c9 in virtio_device_stop_ioeventfd_impl (vdev=0x559d703a6aa0) at ../hw/virtio/virtio.c:3774
#7 0x0000559d6d9a55c8 in virtio_bus_stop_ioeventfd (bus=0x559d703a6a20) at ../hw/virtio/virtio-bus.c:259
#8 0x0000559d6d9a53e8 in virtio_bus_grab_ioeventfd (bus=0x559d703a6a20) at ../hw/virtio/virtio-bus.c:199
#9 0x0000559d6dbf841c in virtio_device_grab_ioeventfd (vdev=0x559d703a6aa0) at ../hw/virtio/virtio.c:3783
#10 0x0000559d6d9bde18 in vhost_dev_enable_notifiers (hdev=0x559d707edd70, vdev=0x559d703a6aa0) at ../hw/virtio/vhost.c:1592
#11 0x0000559d6d89a0b8 in vhost_net_start_one (net=0x559d707edd70, dev=0x559d703a6aa0) at ../hw/net/vhost_net.c:266
#12 0x0000559d6d89a6df in vhost_net_start (dev=0x559d703a6aa0, ncs=0x559d7048d890, data_queue_pairs=31, cvq=0) at ../hw/net/vhost_net.c:412
#13 0x0000559d6dbb5b89 in virtio_net_vhost_status (n=0x559d703a6aa0, status=15 '\017') at ../hw/net/virtio-net.c:311
#14 0x0000559d6dbb5e34 in virtio_net_set_status (vdev=0x559d703a6aa0, status=15 '\017') at ../hw/net/virtio-net.c:392
#15 0x0000559d6dbb60d8 in virtio_net_set_link_status (nc=0x559d7048d890) at ../hw/net/virtio-net.c:455
#16 0x0000559d6da64863 in qmp_set_link (name=0x559d6f0b83d0 "hostnet1", up=true, errp=0x7ffdd76569f0) at ../net/net.c:1459
#17 0x0000559d6da7226e in net_vhost_user_event (opaque=0x559d6f0b83d0, event=CHR_EVENT_OPENED) at ../net/vhost-user.c:301
#18 0x0000559d6ddc7f63 in chr_be_event (s=0x559d6f2ffea0, event=CHR_EVENT_OPENED) at ../chardev/char.c:62
#19 0x0000559d6ddc7fdc in qemu_chr_be_event (s=0x559d6f2ffea0, event=CHR_EVENT_OPENED) at ../chardev/char.c:82
This issue causes guest kernel stop kicking device and traffic stop.
Add vhost_started check in virtio_net_handle_tx_bh to fix this wrong
VRING_USED_F_NO_NOTIFY set.
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240402045109.97729-1-yajunw@nvidia.com>
[PMD: Use unlikely()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In xen_evtchn_soft_reset() variable flush_kvm_routes can
be used before being initialized.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Oleg Sviridov <oleg.sviridov@red-soft.ru>
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240329113939.257033-1-artem.chernyshev@red-soft.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
../hw/nvme/ctrl.c:6081:21: error: ‘result’ may be used uninitialized [-Werror=maybe-uninitialized]
It's not obvious that 'result' is set in all code paths. When &result is
a returned argument, it's even less clear.
Looking at various assignments, 0 seems to be a suitable default value.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-ID: <20240328102052.3499331-18-marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
CXL is based on PCIe. In is pointless to initialize
its context on non-PCI machines.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20240327161642.33574-1-philmd@linaro.org>
Similarly to commit 9de9fa5cf2 ("hw/arm/smmu-common: Avoid using
inlined functions with external linkage"):
None of our code base require / use inlined functions with external
linkage. Some places use internal inlining in the hot path. These
two functions are certainly not in any hot path and don't justify
any inlining, so these are likely oversights rather than intentional.
Fix:
C compiler for the host machine: clang (clang 15.0.0 "Apple clang version 15.0.0 (clang-1500.3.9.4)")
...
hw/arm/smmu-common.c:203:43: error: static function 'smmu_hash_remove_by_vmid' is
used in an inline function with external linkage [-Werror,-Wstatic-in-inline]
g_hash_table_foreach_remove(s->iotlb, smmu_hash_remove_by_vmid, &vmid);
^
include/hw/arm/smmu-common.h:197:1: note: use 'static' to give inline function 'smmu_iotlb_inv_vmid' internal linkage
void smmu_iotlb_inv_vmid(SMMUState *s, uint16_t vmid);
^
static
hw/arm/smmu-common.c:139:17: note: 'smmu_hash_remove_by_vmid' declared here
static gboolean smmu_hash_remove_by_vmid(gpointer key, gpointer value,
^
Fixes: ccc3ee3871 ("hw/arm/smmuv3: Add CMDs related to stage-2")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20240313184954.42513-2-philmd@linaro.org>
Change the board revision number and RAM size to 1Gb on 32-bit hosts.
On these systems, RAM has a 2047 MB limit and this breaks the tests.
Fixes: 7785e8ea22 ("hw/arm: Introduce Raspberry PI 4 machine")
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20240329150155.357043-1-clg@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the group of the highest priority pending interrupt is disabled
via ICC_IGRPEN*, the ICC_HPPIR* registers should return
INTID_SPURIOUS, not the interrupt ID. (See the GIC architecture
specification pseudocode functions ICC_HPPIR1_EL1[] and
HighestPriorityPendingInterrupt().)
Make HPPIR reads honour the group disable, the way we already do
when determining whether to preempt in icc_hppi_can_preempt().
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240328153333.2522667-1-peter.maydell@linaro.org
This fixes the invalid bInterfaceProtocol value 0x04 in the USB audio
AudioControl descriptors. It should be zero. While Linux and Windows
forgive this error, macOS 14 Sonoma does not. The usb-audio device does
not appear in macOS sound settings even though the device is recognized
and shows up in USB system information. According to the USB audio class
specs 1.0-4.0, valid values are 0x00, 0x20, 0x30 and 0x40. (Note also
that Linux prints the warning "unknown interface protocol 0x4, assuming
v1", but then proceeds as if the value was zero.)
This also fixes the invalid wTotalLength value in the multi-channel
setup AudioControl interface header descriptor (used when multi=on
and out.mixing-engine off). The combined length of all the descriptors
there add up to 0x37, not 0x38. In Linux, "lsusb -D ..." displays
incomplete descriptor information when this length is incorrect.
Signed-off-by: Joonas Kankaala <joonas.a.kankaala@gmail.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----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=7UPB
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-for-9.0-3-20240331' of https://gitlab.com/npiggin/qemu into staging
Various fixes for recent regressions and new code.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmYJEQMACgkQZ7MCdqhi
# HK6l0BAAkVf/BXKJxMu3jLvCpK/fBYGytvfHBR9PdWeBwIirqsk3L8eI/Fb5qkMZ
# NMrfECyHR9LTcWb6/Pi/PGciNNWeyleN6IuVBeWfraIFyfHcxpwEKH8P+cXr5EWq
# WDg+1GUt9+FHuAC9UdGZ81UzX7qeI9VfD3wHceqJ/XRU3qjj67DPZjTpsvxuP64+
# N7MhdEM69F34uiIAn1aNCceXiS00dvtu6lDl3+18TzT8sNc6S3qdyxVcqfRhTJfY
# FMZIN3j2hQrVOElEQE9vAOeJyjAQCM+U0y3XZIZHFUw/GTwKV0tm08RFnnxprteG
# 67vR5uXrDEELnU/1PA1YeyaBMA3Z3Nc36XbGf8zTD6rKkS2z0lWMcs72pPIxbMXj
# c4FdnHaE+Q5ngy5s1p6bm5xM7WOEhrsJkgIu2N0weRroe0nAxywDWw3uQlMoV8Oc
# Xet/xM2IKdc0PLzTvFO7xKnW3oqavJ4CX/6XgrGBoMDZKO1JRqaMixGtYKmoH/1h
# 96+jdRbPTZAY8aoiFWW7t065lvdWt74A6QITcn2Kqm04j3MGJfyWMU6dakBzwuri
# PhOkf40o8qn8KN0JNfSO+IXhYVRRotLO/s9H7TEyQiXm25qrGMIF9FErnbDseZil
# rGR4eL0lcwJboYH9RSRWg0NNqpUekvqBzdnS+G0Ad3J+qaMYoik=
# =7UPB
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 31 Mar 2024 08:30:11 BST
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-9.0-3-20240331' of https://gitlab.com/npiggin/qemu:
tests/avocado: ppc_hv_tests.py set alpine time before setup-alpine
tests/avocado: Fix ppc_hv_tests.py xorriso dependency guard
target/ppc: Do not clear MSR[ME] on MCE interrupts to supervisor
target/ppc: Fix GDB register indexing on secondary CPUs
target/ppc: Restore [H]DEXCR to 64-bits
target/ppc/mmu-radix64: Use correct string format in walk_tree()
hw/ppc/spapr: Include missing 'sysemu/tcg.h' header
spapr: nested: use bitwise NOT operator for flags check
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"sysemu/tcg.h" declares tcg_enabled(), and is implicitly included.
Include it explicitly to avoid the following error when refactoring
headers:
hw/ppc/spapr.c:2612:9: error: call to undeclared function 'tcg_enabled'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
if (tcg_enabled()) {
^
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Check for flag bit in H_GUEST_GETSET_STATE_FLAG_GUEST_WIDE need to use
bitwise NOT operator to ensure no other flag bits are set.
Resolves: Coverity CID 1540008
Resolves: Coverity CID 1540009
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
It is incorrect to have the VIRTIO_NET_HDR_F_NEEDS_CSUM set when
checksum offloading is disabled so clear the bit.
TCP/UDP checksum is usually offloaded when the peer requires virtio
headers because they can instruct the peer to compute checksum. However,
igb disables TX checksum offloading when a VF is enabled whether the
peer requires virtio headers because a transmitted packet can be routed
to it and it expects the packet has a proper checksum. Therefore, it
is necessary to have a correct virtio header even when checksum
offloading is disabled.
A real TCP/UDP checksum will be computed and saved in the buffer when
checksum offloading is disabled. The virtio specification requires to
set the packet checksum stored in the buffer to the TCP/UDP pseudo
header when the VIRTIO_NET_HDR_F_NEEDS_CSUM bit is set so the bit must
be cleared in that case.
Fixes: ffbd2dbd8e ("e1000e: Perform software segmentation for loopback")
Buglink: https://issues.redhat.com/browse/RHEL-23067
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
virtio_net_guest_notifier_pending() and virtio_net_guest_notifier_mask()
checked VIRTIO_NET_F_MQ to know there are multiple queues, but
VIRTIO_NET_F_RSS also enables multiple queues. Refer to n->multiqueue,
which is set to true either of VIRTIO_NET_F_MQ or VIRTIO_NET_F_RSS is
enabled.
Fixes: 68b0a6395f ("virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
QEMU build fails with
hw/i386/fw_cfg.c:74: undefined reference to `smbios_get_table_legacy'
when it's built with only 'microvm' enabled i.e. with config patch
+++ b/configs/devices/i386-softmmu/default.mak
@@ -26,7 +26,7 @@
# Boards:
#
-CONFIG_ISAPC=y
-CONFIG_I440FX=y
-CONFIG_Q35=y
+CONFIG_ISAPC=n
+CONFIG_I440FX=n
+CONFIG_Q35=n
It happens because I've fogotten/lost smbios_get_table_legacy() stub.
Fix it by adding missing stub as Philippe suggested.
Fixes: b42b0e4daa "smbios: build legacy mode code only for 'pc' machine"
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-ID: <20240326122630.85989-1-imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The "clock_set_mul_div" function doesn't propagate the clock period
to the children if it is changed (e.g. by enabling/disabling a clock
multiplexer).
This was overlooked during the implementation due to late changes.
This commit propagates the change if the multiplier or divider changes.
Fixes: ec7d83acbd ("hw/misc/stm32l4x5_rcc: Add an internal clock multiplexer object")
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-ID: <20240317103918.44375-2-arnaud.minier@telecom-paris.fr>
[PMD: Check clock_set_mul_div() return value]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20240325152827.73817-4-philmd@linaro.org>
Trivial inlining in preliminary patch to make the next
one easier to review.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20240325152827.73817-3-philmd@linaro.org>
Let clock_set_mul_div() return a boolean value whether the
clock has been updated or not, similarly to clock_set().
Return early when clock_set_mul_div() is called with
same mul/div values the clock has.
Acked-by: Luc Michel <luc@lmichel.fr>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20240325152827.73817-2-philmd@linaro.org>
The io_timeout property, introduced in c9b6609 (part of 6.0) is
silently overwritten by the hardcoded default value of 30 seconds
(DEFAULT_IO_TIMEOUT) in scsi_generic_realize because that function is
being called after the properties have already been applied.
The property definition already has a default value which is applied
correctly when no value is explicitly set, so we can just remove the
code which overrides the io_timeout completely.
This has been tested by stracing SG_IO operations with the io_timeout
property set and unset and now sets the timeout field in the ioctl
request to the proper value.
Fixes: c9b6609b69 ("scsi: make io_timeout configurable")
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Message-ID: <20240315145831.2531695-1-lorenz@brun.one>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
VDUSE requires that virtqueues are first enabled before the DRIVER_OK
status flag is set; with the current API of the kernel module, it is
impossible to enable the opposite order in our block export code because
userspace is not notified when a virtqueue is enabled.
This requirement also mathces the normal initialisation order as done by
the generic vhost code in QEMU. However, commit 6c482547 accidentally
changed the order for vdpa-dev and broke access to VDUSE devices with
this.
This changes vdpa-dev to use the normal order again and use the standard
vhost callback .vhost_set_vring_enable for this. VDUSE devices can be
used with vdpa-dev again after this fix.
vhost_net intentionally avoided enabling the vrings for vdpa and does
this manually later while it does enable them for other vhost backends.
Reflect this in the vhost_net code and return early for vdpa, so that
the behaviour doesn't change for this device.
Cc: qemu-stable@nongnu.org
Fixes: 6c4825476a ('vdpa: move vhost_vdpa_set_vring_ready to the caller')
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240315155949.86066-1-kwolf@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Mark devices with user_creatable = false that can crash QEMU otherwise
* Fix s390x TEST-AND-SET TCG instruction emulation
* Move pc955* devices to hw/gpio/
-----BEGIN PGP SIGNATURE-----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=lfZM
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-03-25' of https://gitlab.com/thuth/qemu into staging
* Fix timeouts in Travis-CI jobs
* Mark devices with user_creatable = false that can crash QEMU otherwise
* Fix s390x TEST-AND-SET TCG instruction emulation
* Move pc955* devices to hw/gpio/
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmYBhdgRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVcfA/9FulEN4HrjD3ObyboA+WfibXURwChui98
# 8LvL/fAGe3BZXQtspuNmPyrKRtIOrIwHJyFuxf2N5+8BuvGhEHQIuvIhQIj/rvfy
# X14KlldmQ3w3HlI3Ud4YiebLyK3AAFC2ApIywzFsnN+HoaHJR2EyDIb+T7OsGJZf
# ZLE/Z7qANxoNeZ+a3+rQR3SVpijyS3fXxDSaILrq2uW4kCCs/55O8Rt3Qb+PFSVd
# fF+OlpG6o+z73ACZc1u9Io4IO1ZZc/NdkmDTNz4HknkvJLTLF6kOECAxLl0ytgAG
# YRzBGKes29Zpa9wn/9rc75/OYNS0Ks+B19sQnijWUNX0zq5FkReXNXiyVcbT7d4p
# 6jFzlFnjj4ifB8uQkZTGcx/lL4s4VkPzF+f7fgHq9CKNrNsx8uca0TyQ8s4y+NGb
# C98kJdHd+QhCcuNnAbifCwuFaxQ8C4BdgzxVbU/sGDKNkINNkiTp+uue4TxnRKvV
# MfhqdnWRvqgZ0Rl4TxqcNfODK72Z1YNv3933OKE/mRJYS1Q529TIq4vfp8WIMsWQ
# 7+ipo4WKXhkiSOJZD6AkCoFum1W8yaDzUDJTw2Xt2bPBL3+FXcQyKkKVUMfzIJ8M
# KLe0Bb9W/pYU1ToTciTP0dkQF/02tG0Vik273445wPgH0x8OyHJkPF/ny1a7lKFO
# 5jreYdMxWdc=
# =lfZM
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 25 Mar 2024 14:10:32 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-03-25' of https://gitlab.com/thuth/qemu:
tests/tcg/s390x: Test TEST AND SET
target/s390x: Use mutable temporary value for op_ts
libqos/virtio.c: Correct 'flags' reading in qvirtqueue_kick
misc/pca955*: Move models under hw/gpio
aspeed: Make the ast1030-a1 SoC not user creatable
aspeed: Make the ast2600-a3 SoC not user creatable
hw/microblaze: Do not allow xlnx-zynqmp-pmu-soc to be created by the user
.travis.yml: Remove the unused xfslib-dev package
.travis.yml: Shorten the runtime of the problematic jobs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PCA9552 and PCA9554 devices are both I2C GPIO controllers and the
PCA9552 also can drive LEDs. Do all the necessary adjustments to move
the models under hw/gpio.
Cc: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240325134833.1484265-1-clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There's no way for the macio_nvram device to report failure to write
data, but we can at least report it to the user with error_report()
as we do in other devices like xlnx-efuse.
Spotted by Coverity.
Resolves: Coverity CID 1507628
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240312183810.557768-6-peter.maydell@linaro.org
In pca9554_get_pin() and pca9554_set_pin(), we try to detect an
incorrect pin value, but we get the condition wrong, using ">"
when ">=" was intended.
This has no actual effect, because in pca9554_initfn() we
use the correct test when creating the properties and so
we'll never be called with an out of range value. However,
Coverity complains about the mismatch between the check and
the later use of the pin value in a shift operation.
Use the correct condition.
Resolves: Coverity CID 1534917
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240312183810.557768-5-peter.maydell@linaro.org
Aspeed SoCs are complex devices that can not be specified on the
command line. Fix that to avoid QEMU aborts.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2227
Fixes: 356b230ed1 ("aspeed/soc : Add AST1030 support")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240319150903.413662-2-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Aspeed SoCs are complex devices that can not be specified on the
command line. Fix that to avoid QEMU aborts.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2227
Fixes: f25c0ae107 ("aspeed/soc: Add AST2600 support")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240319150903.413662-1-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Using xlnx-zynqmp-pmu-soc on the command line causes QEMU to crash:
./qemu-system-microblazeel -M petalogix-ml605 -device xlnx-zynqmp-pmu-soc
**
ERROR:tcg/tcg.c:813:tcg_register_thread: assertion failed: (n < tcg_max_ctxs)
Bail out!
Aborted (core dumped)
Mark the device with "user_creatable = false" to avoid that this can happen.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2229
Message-ID: <20240322183153.1023359-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The timebase-frequency of guest OS should be the same with host
machine. The timebase-frequency value in DTS should be got from
hypervisor when using KVM acceleration.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Message-ID: <20240314061510.9800-1-yongxuan.wang@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
