When an event is reported but no buffers are present in the event vq,
we can set a flag and report a dummy event as soon as one is added.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement the hotplug() and hot_unplug() interfaces in virtio-scsi, by signal
the virtio_scsi.ko in guest kernel via event virtual queue.
The counterpart patch of virtio_scsi.ko will be sent soon in another thread.
Signed-off-by: Sen Wang <senwang@linux.vnet.ibm.com>
Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
[ Add memset, fix LUN field, placate checkpatch - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux will not use these, but a very similar mechanism will be used to
report the condition via virtio-scsi events.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a device is resized, we will report a unit attention condition
for CAPACITY DATA HAS CHANGED. However, we should ensure that this
condition does not override a more important unit attention condition.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add two interfaces hotplug() and hot_unplug() to scsi bus info.
The scsi bus can implement these two interfaces to signal the HBA driver
of guest kernel to add/remove the scsi device in question.
Signed-off-by: Sen Wang <senwang@linux.vnet.ibm.com>
Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
[ Fixed braces and indentation - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Support for the LOEJ bit of the START/STOP UNIT command right now is
limited to CD-ROMs. This is wrong, since removable hard disks (in the
real world: SD card readers) also support it in pretty much the same way.
Without the LOEJ bit, START/STOP UNIT does nothing for all devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add sense code for DATA_PROTECT/WRITE_PROTECTED and return this error
for any WRITE*/WRITE_VERIFY* calls if the device is readonly=on,
i.e. write-protected
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Improve the tests for the LBA to cover more cases.
For the 16 byte opcodes, the lba is a uint64, so we need to check is to
make sure that we do not wrap. For example if an opcode would specify
the LBA:0xffffffffffffffff and LEN:2 then lba+len would wrap to 1.
Also verify that ALL requested blocks are available, not just the first one.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The QEMU SCSI emulation does not support protection information,
so any READ/WRITE/VERIFY commands that has the protect bits set to
non-zero should fail with ILLEGAL_REQUEST/INVALID_FIELD_IN_CDB
From SCSI SBC :
If the logical unit does not support protection information,
then the device server should terminate the command with CHECK CONDITION
status with the sense key set to ILLEGAL REQUEST and the additional sense
code set to INVALID FIELD IN CDB.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
[ Rebase after scsi_dma_reqops introduction - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Finally, this uses the "plumbing" in the previous patch to
add support for toggling the WCE bit of the caching mode page.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds the bulk of the parsing code for MODE SELECT, including
breaking out changes to different mode pages, and checking that only
changeable values are modified.
In order to report errors correctly two passes are made through the
parameters; the first only looks for errors, the second actually
applies the changes to the mode page.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will make offsets the same when implementing MODE SELECT. This is
because MODE SELECT has to deal with both 2-byte and 4-byte headers.
Unfortunately, this means that the offsets are now off by two compared
to the descriptions in the SCSI specs, which include the header.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds the implementation of write_data for the emulated
command case. The first time through it asks for more data,
the second time it finishes the processing of the command.
MODE SELECT and MODE SELECT(10) can now be re-enabled, but they
will not do much.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous patch only separated the send_command callback.
Use different implementations also for read_data and write_data.
The latter is still unreachable, so it aborts for now.
read_data passes the data buffer that was prepared and completes
the command.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only checks for present medium were still done in scsi_send_command
for emulated commands. So move those to scsi_disk_emulate_command
and return different SCSIReqOps depending on the kind of command.
Checks for present medium can be done unconditionally for the
scsi_disk_dma_reqops case.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We want to use separate SCSIReqOps for emulated commands needing an
allocated buffer vs. those that are zerocopy when the HBA supports
S/G lists. Ensure that all of the former are in scsi_disk_emulate_command.
Commands that do not have any parameters are more similar to emulated
commands, so also move them, even if they do I/O.
Finally, MODE SELECT and MODE SELECT(10) are broken because we do not
yet support passing parameter data _to_ emulated commands, so disable
them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By making discard asynchronous, we can reuse all the error handling
code that is used for other commands.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds two new properties vendor and product to SCSI disks.
These options let the user customize the inquiry data returned by the
disk.
Signed-off-by: Yan Vugenfirer <yan@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
[ Use vendor and product property names, avoid "if" statements. - PB ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
scsi-block is a passthrough device and does not allow customization
of vendor, product, removable, DPOFUA, block size or any other piece of
information. Thus, drop DEFINE_SCSI_DISK_PROPERTIES() from the
list of qdev properties.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simplify the code by checking against req->hba_private directly,
and asserting that it is non-NULL before a command is completed
or canceled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By first resetting the devices, lsi_soft_reset will find the queue
already cleared so there is no need to do that forcibly (which may also
leak SCSIRequests, and/or worse due to dangling references to the
lsi_request in the hba_private field).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
scsi_req_abort is for terminating a command with a non-zero status.
The ABORT task management function is invoked by scsi_req_cancel.
In fact, ABORTED_COMMAND is a sense key, not a SAM status code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
trace_megasas_dcmd_dump_frame() takes 9 arguments, which is
rather much. Plus the trace infrastructure doesn't support
it. As we can get the information via other means it's pointless
to have it in the driver, so rather use some proper trace
point here and remove the old one.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* stefanha/net:
remove unused QemuOpts parameter from net init functions
convert net_init_bridge() to NetClientOptions
convert net_init_tap() to NetClientOptions
convert net_init_vde() to NetClientOptions
convert net_init_socket() to NetClientOptions
convert net_init_slirp() to NetClientOptions
convert net_init_dump() to NetClientOptions
convert net_init_nic() to NetClientOptions
convert net_client_init() to OptsVisitor
hw, net: "net_client_type" -> "NetClientOptionsKind" (qapi-generated)
qapi schema: add Netdev types
qapi schema: remove trailing whitespace
qapi: introduce OptsVisitor
expose QemuOpt and QemuOpts struct definitions to interested parties
qapi: introduce "size" type
qapi: generate C types for fixed-width integers
qapi: add test case for deallocating traversal of incomplete structure
qapi: fix error propagation
MAINTAINERS: Replace net maintainer Mark McLoughlin with Stefan Hajnoczi
* stefanha/trivial-patches:
Fix some more Qemus in documentation and help text
qdev: Fix Open Firmware comment
cpus.c: Make all_cpu_threads_idle() static
Use macro QEMU_PACKED for new packed structures
Recognize PCID feature
powerpc pci: fixed packing of ranges[]
* pmaydell/arm-devs.for-upstream:
exynos4210: add Exynos4210 i2c implementation
hw/exynos4210_rtc.c: remove unnecessary code
hw/exynos4210_rtc.c: Fix calculating for value of year
hw/vexpress.c: Allow >4GB of RAM for Cortex-A15 daughterboard
hw/arm_boot.c: Support DTBs which use 64 bit addresses
device_tree: Add support for reading device tree properties
hw/arm_boot.c: Check for RAM sizes exceeding ATAGS capacity
hw/arm_boot.c: Consistently use ram_size from arm_boot_info struct
hw/arm_boot.c: Make ram_size a uint64_t
hw/pl011.c: Avoid crash on read when no chr backend present
* stefanha/tracing:
Update simpletrace.py for new log format
Simpletrace v2: Support multiple arguments, strings.
monitor: remove unused do_info_trace
trace: added ability to comment out events in the list
v1->v2:
- NetdevVdeOptions::port and ::mode are of type uint16. Remove superfluous
range checks.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
I "reverse engineered" the following permissions between the -socket
sub-options:
fd listen connect mcast udp | localaddr
fd x . . . . | .
listen . x . . . | .
connect . . x . . | .
mcast . . . x . | x
udp . . . . x | x
-------------------------------------------+
localaddr . . . x x x
I transformed the code accordingly. The real fix would be to embed "fd",
"listen", "connect", "mcast" and "udp" in a separate union. However
OptsVisitor's enum parser only supports the type=XXX QemuOpt instance as
union discriminator.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
v1->v2:
- NetdevDumpOptions::len is of type 'size', whose C type was changed to
uint64_t. Adapt the printf() format specifier macro.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
v1->v2:
- NetLegacyNicOptions::vectors is of type uint32
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The net_client_init() prototype is kept intact.
Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a
Netdev or a NetLegacy. The original meat of net_client_init() is moved to
and simplified in net_client_init1():
Fields not common between -net and -netdev are clearly separated. Getting
the name for the init functions is cleaner: Netdev::id is mandatory, and
all init functions handle a NULL NetLegacy::name. NetLegacy::vlan
explicitly depends on -net (see below).
Verifying the "type=" option for -netdev can be turned into a switch.
Format validation with qemu_opts_validate() can be removed because the
visitor covers it. Relatedly, the "net_client_types" array is reduced to
an array of init functions that can be directly indexed by opts->kind.
(Help text is available in the schema JSON.)
The outermost negation in the condition around qemu_find_vlan() was
flattened, because it expresses the dependent code's requirements more
clearly.
VLAN lookup is avoided if there's no init function to pass the VLAN to.
Whenever the value of type=... is needed, we substitute
NetClientOptionsKind_lookup[kind].
The individual init functions are not converted yet, thus the original
QemuOpts instance is passed transparently.
v1->v2:
- NetLegacy::name is optional. Tracked it through all init functions: they
all handle a NULL name. Updated commit message accordingly.
v2->v3:
- NetLegacy::id is allowed and takes precedence over NetLegacy::name.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
NetdevTapOptions::sndbuf and NetdevDumpOptions::len use the new "size"
type.
v1->v2:
- NetLegacy::name is optional
- NetLegacyNicOptions::vectors is of type uint32
- NetdevVdeOptions::port and ::mode are of type uint16
- NetLegacy::vlan has type int32
v2->v3:
- NetLegacy::id is allowed and takes precedence over NetLegacy::name
- replace "@traits" with "@opts" in NetLegacy & Netdev descriptions
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This visitor supports parsing
-option [type=]discriminator[,optarg1=val1][,optarg2=val2][,...]
style QemuOpts objects into "native" C structures. After defining the type
tree in the qapi schema (see below), a root type traversal with this
visitor linked to the underlying QemuOpts object will build the "native" C
representation of the option.
The type tree in the schema, corresponding to an option with a
discriminator, must have the following structure:
struct
scalar member for non-discriminated optarg 1 [*]
list for repeating non-discriminated optarg 2 [*]
wrapper struct
single scalar member
union
struct for discriminator case 1
scalar member for optarg 3 [*]
list for repeating optarg 4 [*]
wrapper struct
single scalar member
scalar member for optarg 5 [*]
struct for discriminator case 2
...
The "type" optarg name is fixed for the discriminator role. Its schema
representation is "union of structures", and each discriminator value must
correspond to a member name in the union.
If the option takes no "type" descriminator, then the type subtree rooted
at the union must be absent from the schema (including the union itself).
Optarg values can be of scalar types str / bool / integers / size.
Members marked with [*] may be defined as optional in the schema,
describing an optional optarg.
Repeating an optarg is supported; its schema representation must be "list
of structure with single mandatory scalar member". If an optarg is not
described as repeating in the schema (ie. it is defined as a scalar field
instead of a list), its last occurrence will take effect. Ordering between
differently named optargs is not preserved.
A mandatory list (or an optional one which is reported to be available),
corresponding to a repeating optarg, has at least one element after
successful parsing.
v1->v2:
- Update opts_type_size() prototype to uint64_t.
- Add opts_type_uint64() for options needing the full uint64_t range.
(Internals could be extracted to "cutils.c".)
- Allow negative values in opts_type_int().
- Rebase to nested Makefiles.
v2->v3:
- Factor opts_visitor_insert() out of opts_start_struct() and call it
separately for opts_root->id if there's any.
- Don't require non-negative values in opts_type_int()'s error message.
- g_malloc0() may return NULL for zero-sized requests. Support empty
structures by requesting 1 byte for them instead.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The only clients should be the existent "qemu-option.c", and the upcoming
"qapi/opts-visitor.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
v1->v2:
- fall back to uint64 rather than int
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
