This is always true for sparc64, so this is dead since 3a5f6805c7.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The old ppc64 implementation replaces 2 or 4 insns, which leaves a race
condition in which a thread could be stopped at a PC in the middle of
the sequence, and when restarted does not see the complete address
computation and branches to nowhere.
The new implemetation replaces only one insn, swapping between
b <dest>
and
mtctr r31
falling through to a general-case indirect branch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The old implementation replaces two insns, swapping between
b <dest>
nop
br x30
and
adrp x30, <dest>
addi x30, x30, lo12:<dest>
br x30
There is a race condition in which a thread could be stopped at
the PC of the second insn, and when restarted does not see the
complete address computation and branches to nowhere.
The new implemetation replaces only one insn, swapping between
b <dest>
br tmp
and
ldr tmp, <jmp_addr>
br tmp
Reported-by: hev <r@hev.cc>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We now have the option to generate direct or indirect
goto_tb depending on the dynamic displacement, thus
the define is no longer necessary or completely accurate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Install empty versions for !TCG_TARGET_HAS_direct_jump hosts.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace 'tc_ptr' and 'addr' with 'tb' and 'n'.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Stop overloading jmp_target_arg for both offset and address,
depending on TCG_TARGET_HAS_direct_jump. Instead, add a new
field to hold the jump insn offset and always set the target
address in jmp_target_addr[]. This will allow a tcg backend
to use either direct or indirect depending on displacement.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This can replace four other variables that are references
into the TranslationBlock structure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will shortly be used for more than reset.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The INDEX_op_goto_tb opcode needs no register allocation.
Split out a dedicated helper function for it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Similar to the existing set_jmp_reset_offset. Include the
rw->rx address space conversion done by arm and s390x, and
forgotten by mips and riscv.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Similar to the existing set_jmp_reset_offset. Move any assert for
TCG_TARGET_HAS_direct_jump into the new function (which now cannot
be build-time). Will be unused if TCG_TARGET_HAS_direct_jump is
constant 0, but we can't test for constant in the preprocessor,
so just mark it G_GNUC_UNUSED.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Test TCG_TARGET_HAS_direct_jump instead of testing an
implementation pointer.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The INDEX_op_exit_tb opcode needs no register allocation.
Split out a dedicated helper function for it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmPGjawACgkQda1lgCoL
QhHOgQf/QxWxhydyj2679bnznCgJXOXKQ1C+MkFvk0ekPJT+bZDwKoohAH3JgbxT
zp3UeMmtqS9JQDcGF6PdIldp4DB7uH+InvVkFFZeD1LN0X6nYHEgZ3Q1obSbf8ut
TGlB6+4TM6ehtk9owDuzlm7/5OFLmEGvGjdVgzZKtwzXGWUKVO7AzzRQBj4QnKq/
w8cSlZAlF+lJI3IsnCh8EIAdL3SP8dub3yfYJDepbht7IwfkUWPOWBFOSUpo5quX
r1rLKWtjQRsoGDe4iRNrLQu+sgj9npZwj7aYotarJauYBW8qd3jdD4OtiBYj2OMU
LvEIqwNyITivKnapEnDEJV74umzArw==
=lIgU
-----END PGP SIGNATURE-----
Merge tag 'pull-tpm-2023-01-17-1' of https://github.com/stefanberger/qemu-tpm into staging
Merge tpm 2023/01/17 v1
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmPGjawACgkQda1lgCoL
# QhHOgQf/QxWxhydyj2679bnznCgJXOXKQ1C+MkFvk0ekPJT+bZDwKoohAH3JgbxT
# zp3UeMmtqS9JQDcGF6PdIldp4DB7uH+InvVkFFZeD1LN0X6nYHEgZ3Q1obSbf8ut
# TGlB6+4TM6ehtk9owDuzlm7/5OFLmEGvGjdVgzZKtwzXGWUKVO7AzzRQBj4QnKq/
# w8cSlZAlF+lJI3IsnCh8EIAdL3SP8dub3yfYJDepbht7IwfkUWPOWBFOSUpo5quX
# r1rLKWtjQRsoGDe4iRNrLQu+sgj9npZwj7aYotarJauYBW8qd3jdD4OtiBYj2OMU
# LvEIqwNyITivKnapEnDEJV74umzArw==
# =lIgU
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 17 Jan 2023 11:59:40 GMT
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* tag 'pull-tpm-2023-01-17-1' of https://github.com/stefanberger/qemu-tpm:
tests/qtest/tpm-emu: Avoid hangs using abort handlers closing channels
tests/qtest: Poll on waitpid() for a while before sending SIGKILL
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Install abort handlers that close the TPM control and data channels in
case an abort occurs. The purpose of this is to have QEMU terminate
under abnormal test case failures to resolve intermittent hangs on s390x
hosts running TPM tests for QEMU/x86_64.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230111134547.3959604-1-stefanb@linux.ibm.com
To prevent getting stuck on waitpid() in case the target process does
not terminate on SIGTERM, poll on waitpid() for 30s and if the target
process has not changed state until then send a SIGKILL to it.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230112143413.3979057-1-stefanb@linux.ibm.com
[PMM: changed TFR to RETRY_ON_EINTR]
Recently the g_assert(cpu == current_cpu) test has been
intermittently failing with gcc. Reorg the code around
the setjmp to minimize the lifetime of the cpu variable
affected by the setjmp.
This appears to fix the existing issue with clang as well.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1147
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the attribute, which is supported by clang, instead of
the #pragma, which is not supported and, for some reason,
also not detected by the meson probe, so we fail by -Werror.
Include only <immintrin.h> as that is the outermost "official"
header for these intrinsics -- emmintrin.h and smmintrin -- are
older SSE2 and SSE4 specific headers, while the immintrin.h
includes all of the Intel intrinsics.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add ability to dump /tmp/perf-<pid>.map and jit-<pid>.dump.
The first one allows the perf tool to map samples to each individual
translation block. The second one adds the ability to resolve symbol
names, line numbers and inspect JITed code.
Example of use:
perf record qemu-x86_64 -perfmap ./a.out
perf report
or
perf record -k 1 qemu-x86_64 -jitdump ./a.out
DEBUGINFOD_URLS= perf inject -j -i perf.data -o perf.data.jitted
perf report -i perf.data.jitted
Co-developed-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Co-developed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-4-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add libdw-based functions for loading and querying debuginfo. Load
debuginfo from the system and the linux-user loaders.
This is useful for the upcoming perf support, which can then put
human-readable guest symbols instead of raw guest PCs into perfmap and
jitdump files.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When exiting due to an exit() syscall, qemu-user calls
preexit_cleanup(), but this is currently not the case when exiting due
to a signal. This leads to various buffers not being flushed (e.g.,
for gprof, for gcov, and for the upcoming perf support).
Add the missing call.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230112152013.125680-2-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Guest driver might execute HW commands when shared buffers are not yet
allocated.
This could happen on purpose (malicious guest) or because of some other
guest/host address mapping error.
We need to protect againts such case.
Fixes: CVE-2022-1050
Reported-by: Raven <wxhusst@gmail.com>
Signed-off-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Message-Id: <20220403095234.2210-1-yuval.shaia.ml@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
../hw/usb/ccid-card-emulated.c: In function 'handle_apdu_thread':
../hw/usb/ccid-card-emulated.c:251:24: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
251 | assert((unsigned long)event > 1000);
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230103110814.3726795-2-marcandre.lureau@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This argument was added 9 years ago in commit 83d08f2673
("pc: map PCI address space as catchall region for not mapped
addresses") and has never been used since, so remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230105173826.56748-1-philmd@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Running the test-hmp with V=2 up to V=9 runs the test in verbose mode,
but running for example with V=10 falls back to non-verbose mode ...
Improve this oddity by properly treating the argument as a number.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109101306.271444-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Seems like there is nothing target-specific in here, so these files
can be moved to softmmu_ss to avoid that they get compiled twice
(once for qemu-system-arm and once for qemu-system-aarch64).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230112134928.1026006-8-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Seems like there is also nothing target-specific in here, so these
files can be moved to softmmu_ss to avoid that they get compiled
twice (once for qemu-system-arm and once for qemu-system-aarch64).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230112134928.1026006-7-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Seems like there is nothing target-specific in here, so these files
can be moved to softmmu_ss to avoid that they get compiled twice
(once for qemu-system-arm and once for qemu-system-aarch64).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230112134928.1026006-6-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
arm_ss[] units are built twice: once for 32-bit word size and
once for 64-bit. The following units don't require any word
size knowledge and can be moved to softmmu_ss[] (where they
are built once):
- smmu-common.c
- exynos4_boards.c
- bcm2835_peripherals.c
- tosa.c
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110164406.94366-2-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230112134928.1026006-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The TPM Physical Presence Interface is not target specific.
Build this file once for all targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221209170042.71169-4-philmd@linaro.org>
[thuth: Drop the CONFIG_SOFTMMU statements, they are not needed here]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230112134928.1026006-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The Goldfish interrupt controller is not target specific.
While the Exynos interrupt combiner is only used by the ARM
targets, we can build this device once for all.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221209170042.71169-3-philmd@linaro.org>
[thuth: Change patch title, and also move 'exynos4210_gic.c']
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230112134928.1026006-3-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
While only used by the ARM targets, this device can be built
once for all.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221209170042.71169-2-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230112134928.1026006-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
As qemu_socketpair() was introduced in commit 3c63b4e9
("oslib-posix: Introduce qemu_socketpair()"), it's time
to replace the other existing socketpair() calls with
qemu_socketpair() if possible
Signed-off-by: Guoyi Tu <tugy@chinatelecom.cn>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <cd28916a-f1f3-b54e-6ade-8a3647c3a9a5@chinatelecom.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We're still running into the problem that some logs are cut in the
gitlab-CI since they got too big. The biggest part of the log is
still the output of the qom-test. Let's stop printing the properties
by default to get to a saner size here. The full output can still
be enabled by setting V=2 (or higher) in the environment.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221215153036.422362-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A bunch of cleanups from various people.
- Improved GT64120 on big-endian hosts
- GT64120 north bridge and MC146818 RTC devices are now target independent
- Bonito64 north bridge converted to 3-phase reset API
- PCI refactors around PIIX devices
- Support for nanoMIPS in bootloader generator API
- New YAMON Malta Avocado test
- Removal of 'trap and emulate' KVM support
- System-specific QMP commands restricted to system emulation
-----BEGIN PGP SIGNATURE-----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=oXX+
-----END PGP SIGNATURE-----
Merge tag 'mips-20230113' of https://github.com/philmd/qemu into staging
MIPS patches queue
A bunch of cleanups from various people.
- Improved GT64120 on big-endian hosts
- GT64120 north bridge and MC146818 RTC devices are now target independent
- Bonito64 north bridge converted to 3-phase reset API
- PCI refactors around PIIX devices
- Support for nanoMIPS in bootloader generator API
- New YAMON Malta Avocado test
- Removal of 'trap and emulate' KVM support
- System-specific QMP commands restricted to system emulation
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmPBekAACgkQ4+MsLN6t
# wN4wjxAAtYxyt6WUBpiYfV/LnbQFpAsacues1Vhy9MPYEg5a/iuXWKvWtgRYvGww
# qR0GVQH8rH7tgnCZK+ioq9jX+hvfBskP6CnKhxmb5zDGm7vP7jhhu8UFWY/EtBgq
# 0zpNeLMXtnRJ6PBqo/nWFCVtcpDRZ6IkSbpGWkVkciRFc5n/2VCnlIj8k2I1oMvL
# 11cp2xFQnaPReFXIpMjJHuHv1NObykdlvVg6wQo/A/4qIb8EvJQEPmePjG9Sf0i0
# v2dhnnxG9mze7+uq0dIC16x8Azko3N7dmtNlBU/aGb9OELwx35aux2M4dNDVogwn
# DqL/Wsk54TFewECOfS48t/a/TqV8j/ISW1d/JvovBrN2KovmIAbtqHuMUqKVk5l0
# 23ZOIIPIYwmScZwIlkCIGUuIzFig1zhEmQcoEQaFe/B0oLB2eN/x0Bk9Yklo+i2A
# WNiyiAj7k5492qEdndOySEEDVt6886F/+CdQ6QYF5Z1L/ELck7XHBH3mGDznWpPn
# 6IURyVquPJx7ul62jSGI+Gc+qakNoahIhPo5O7hklOM9GwWNOWXHveyb7xjs7j+O
# eWyVcet+o7hoHkCzmfbyTPySI4qCpF9fA42jqPhATwQPwmGXpbr+4BxUq3KtE43y
# w9tEigwd4voN3dWLItVh6QE4in70osz3XHp93byvo8bHlS0huVY=
# =oXX+
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Jan 2023 15:35:28 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'mips-20230113' of https://github.com/philmd/qemu: (46 commits)
scripts/git.orderfile: Display MAINTAINERS changes first
target/mips: Restrict 'qapi-commands-machine.h' to system emulation
hw/mips/boston: Rename MachineState 'mc' pointer to 'ms'
hw/pci-host/bonito: Declare TYPE_BONITO_PCI_HOST_BRIDGE in header
hw/pci-host/bonito: Use 'bonito_pci' for PCI function #0 code
hw/pci-host/bonito: Use 'bonito_host' for PCI host bridge code
hw/pci-host/bonito: Convert to 3-phase reset
softmmu/rtc: Emit warning when using driftfix=slew on systems without mc146818
hw/rtc/mc146818rtc: Make the mc146818 RTC device target independent
hw/core/qdev-properties-system: Allow the 'slew' policy only on x86
hw/intc: Extract the IRQ counting functions into a separate file
hw/intc/i8259: Make using the isa_pic singleton more type-safe
hw/usb/hcd-uhci: Introduce TYPE_ defines for device models
hw/mips/Kconfig: Track Malta's PIIX dependencies via Kconfig
hw/isa/piix4: Decouple INTx-to-LNKx routing which is board-specific
hw/isa/piix3: Decouple INTx-to-LNKx routing which is board-specific
hw/pci/pci: Factor out pci_bus_map_irqs() from pci_bus_irqs()
hw/pci/pci_host: Trace config accesses on unexisting functions
mips: Always include nanomips disassembler
mips: Remove support for trap and emulate KVM
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The FPSR quotient byte should be set to the value of the quotient and not the
result. Manually calculate the quotient in the frem helper in round to nearest
even mode (note this is different from the quotient calculated internally for
fmod), and use it to set the quotient byte accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1314
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114232959.118224-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The FPSR quotient byte should be set to the value of the quotient and not the
result. Switch from using floatx80_mod() to floatx80_modrem() which returns
the quotient as a uint64_t which can be used for the quotient byte.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114232959.118224-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This enables the quotient parameter to be changed from int32_t to uint32_t and
also allows the extra sign logic in make_quotient() to be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230114232959.118224-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If we get custom to see MAINTAINERS changes first,
we might catch missing MAINTAINERS updates easier.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221216225505.26052-1-philmd@linaro.org>
