Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add a QMP command to allow for the behaviors specified by the
-no-reboot and -no-shutdown command line option to be set at runtime.
The new command is named set-action and takes optional arguments, named
after an event, that provide a corresponding action to take.
Example:
-> { "execute": "set-action",
"arguments": {
"reboot": "none",
"shutdown": "poweroff",
"watchdog": "debug" } }
<- { "return": {} }
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-4-git-send-email-alejandro.j.jimenez@oracle.com>
[Split the series differently, with -action based on the QMP command. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Generalize the qdev_hotplug variable to the different phases of
machine initialization. We would like to allow different
monitor commands depending on the phase.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vnc_write() should be locked after the RFB protocol is initialized.
Fixes: 0c426e4534 ("vnc: Add support for color map")
Cc: qemu-stable@nongnu.org
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Message-id: 20201116141338.148911-1-liangpeng10@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is a new vnc extension for cursors with an alpha channel. Use
it if supported by the vnc client, prefer it over the "rich cursor"
extension which supports only a bitmask for transparency.
This is a visible improvement especially on modern desktops which
actually use the alpha channel when defining cursors.
https://github.com/rfbproto/rfbproto/blob/master/rfbproto.rst#cursor-with-alpha-pseudo-encoding
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20201208115737.18581-7-kraxel@redhat.com
vnc stopped using the copyrect pseudo encoding in 2017, in commit
50628d3479 ("cirrus/vnc: zap bitblit support from console code.")
So we can drop the now unused copyrect feature bit.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20201208115737.18581-5-kraxel@redhat.com
Use an enum for the vnc feature bits. That way they are enumerated
automatically and we don't have to do that manually when adding or
removing features.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201208115737.18581-4-kraxel@redhat.com
Use active_console in that case like we do in many other places.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20201208115737.18581-3-kraxel@redhat.com
Add missing sanity check.
Reproducer: run qemu with "-device qxl" but without "-spice ..."
Fixes: 0d9b90ce5c ("console: make QMP/HMP screendump run in coroutine")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201124122936.30588-1-kraxel@redhat.com
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
This patch contains all the files, whose maintainer I could not get
from ‘get_maintainer.pl’ script.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Adapted exec.c and qdev-monitor.c to new location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
In graphic_hw_update(), first select an existing console,
a specific-console or active_console(if not specified),
then updating the console.
Signed-off-by: lichun <lichun@ruijie.com.cn>
Message-id: 1604682219-114389-1-git-send-email-lichun@ruijie.com.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When we connect to vnc by websocket channel, and disconnect
(maybe by some network exception) before handshake,
qemu will left CLOSE_WAIT socket and never close it
After 04d2529da2 ("ui: convert VNC server to use QIOChannelSocket")
and dd154c4d9f ("io: fix handling of EOF / error conditions in websock GSource"),
the vnc call qio_channel_add_watch only care about G_IO_IN,
but mising G_IO_HUP and G_IO_ERR.
When the websocket channel get EOF or error, it cannot callback,
because the caller ignore the event, that leads to resource leak
We need handle G_IO_HUP and G_IO_ERR event, then cleanup the channel
Fixes: 04d2529da2 ("ui: convert VNC server to use QIOChannelSocket")
Fixes: dd154c4d9f ("io: fix handling of EOF / error conditions in websock GSource")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Message-id: 20201029032241.11040-1-dinghui@sangfor.com.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Thanks to the monitors' coroutine support (merge commit b7092cda1b),
the screendump handler can trigger a graphic_hw_update(), yield and let
the main loop run until update is done. Then the handler is resumed, and
ppm_save() will write the screen image to disk in the coroutine context.
The IO is still blocking though, as the file is set blocking so far,
this could be addressed by some future change (with other caveats).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1230527
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20201027133602.3038018-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function is going to be called from a coroutine, and may yield.
Let's ensure our image reference doesn't change over time (due to resize
etc) by keeping a ref.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201027133602.3038018-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
built-in options, do everything using them instead of the config_host
dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Removes opengl dependency from core qemu. The number of shared
libraries for qemu-system-x86_64 goes down from 66 to 60 on my system.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-15-kraxel@redhat.com
Build spice core code as module. This removes libspice-server and a
handful of indirect dependencies from core qemu. The number of shared
libraries for qemu-system-x86_64 goes down from 73 to 66 on my system.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-13-kraxel@redhat.com
Rename qmp_query_spice() to qmp_query_spice_real(), add to QemuSpiceOps.
Add new qmp_query_spice() function which calls the real function via
QemuSpiceOps if available, otherwise return SpiceInfo.enabled = false.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-9-kraxel@redhat.com
Add QemuSpiceOps struct. This struct holds function pointers to the
spice functions. It will be initialized with pointers to the stub
functions. When spice gets initialized the function pointers will
be re-written to the real functions.
The spice stubs will move from qemu-spice.h to spice-module.c for that,
because they will be needed for both "CONFIG_SPICE=n" and "CONFIG_SPICE=y
but spice module not loaded" cases.
This patch adds the infrastructure and starts with moving
qemu_spice_migrate_info() to QemuSpiceOps.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-3-kraxel@redhat.com
Add new spice-module.c + qemu-spice-module.h files. The code needed to
support modular spice will be there. For starters this will be only the
using_spice variable, more will follow ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-2-kraxel@redhat.com
Restricting system_wakeup/system_reset/system_powerdown to
machine.json pulls slightly less QAPI-generated code into
user-mode and tools.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-3-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
These files are not needed for a linux-user only install.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Message-Id: <20201015201840.282956-1-brogers@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Register some properties as class properties (Eduardo Habkost)
* authz-list-file: Fix crash when filename is not set (Eduardo Habkost)
* can-host-socketcan: Fix crash when 'if' option is not set (Eduardo Habkost)
-----BEGIN PGP SIGNATURE-----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=5B9N
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
machine + QOM queue, 2020-10-14
* Register some properties as class properties (Eduardo Habkost)
* authz-list-file: Fix crash when filename is not set (Eduardo Habkost)
* can-host-socketcan: Fix crash when 'if' option is not set (Eduardo Habkost)
# gpg: Signature made Wed 14 Oct 2020 15:33:17 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request:
can-host-socketcan: Fix crash when 'if' option is not set
authz-list-file: Fix crash when filename is not set
vhost-user: Register "chardev" as class property
vga-pci: Register "big-endian-framebuffer" as class property
i386: Register most CPU properties as class properties
input-barrier: Register properties as class properties
input-linux: Register properties as class properties
rng: Register "opened" as class property
rng-random: register "filename" as class property
rng-egd: Register "chardev" as class property
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Right now it happens to work by pure luck because the spice chardevs
add the spice dependency to the softmmu source set. That'll change
though once we start building spice chardevs as module, so lets fix
it properly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201014121120.13482-7-kraxel@redhat.com
Initialize spice before chardevs. That allows to register the spice
chardevs directly in the init function and removes the need to maintain
a linked list of chardevs just for registration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201014121120.13482-5-kraxel@redhat.com
Save the parent object's open function pointer in the (new)
VCChardevClass struct instead before overwriting it, so we
can look it up when needed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201014121120.13482-3-kraxel@redhat.com
./chardev/baum.c expects the default window_id value to be -1, and not 0
which could be confused with a proper window id (when numbered from 0 by
the ui backend).
This fixes getting Braille output with the curses and gtk frontends.
Fixes: f29b3431f6 ("console: move window ID code from baum to sdl")
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200914100637.eeommoflirxrgaeh@function>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If object-del input-linux object on-the-fly, instance finalize will
close evdev fd without resetting it. However the main thread is still
trying to lock_acquire/lock_release during ppoll, which leads to a very
high CPU utilization.
Signed-off-by: Colin Xu <colin.xu@intel.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-id: 20200925021808.26471-1-colin.xu@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We need to specify SDL_WINDOW_OPENGL if we want to create an OpenGL context on it, i.e. when using '-device virtio-gpu-pci,virgl=on'
Signed-off-by: Jan Henrik Weinstock <jan.weinstock@rwth-aachen.de>
Message-id: b2ba98b3-2975-0d4d-1c56-f659923c714d@rwth-aachen.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently `-vnc none` is fatal when built with `--disable-vnc`. Make
vnc_parse accept "none", so QEMU still run without using vnc.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-id: 20201009014032.3507-1-jandryuk@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is the compiling error:
../ui/curses.c: In function 'curses_refresh':
../ui/curses.c:256:5: error: 'next_maybe_keycode' may be used uninitialized in this function [-Werror=maybe-uninitialized]
256 | curses2foo(_curses2keycode, _curseskey2keycode, chr, maybe_keycode)
| ^~~~~~~~~~
../ui/curses.c:302:32: note: 'next_maybe_keycode' was declared here
302 | enum maybe_keycode next_maybe_keycode;
| ^~~~~~~~~~~~~~~~~~
../ui/curses.c:256:5: error: 'maybe_keycode' may be used uninitialized in this function [-Werror=maybe-uninitialized]
256 | curses2foo(_curses2keycode, _curseskey2keycode, chr, maybe_keycode)
| ^~~~~~~~~~
../ui/curses.c:265:24: note: 'maybe_keycode' was declared here
265 | enum maybe_keycode maybe_keycode;
| ^~~~~~~~~~~~~
cc1.exe: all warnings being treated as errors
gcc version 10.2.0 (Rev1, Built by MSYS2 project)
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20201012234348.1427-4-luoyonggang@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200921221045.699690-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200921221045.699690-10-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
While detection of the framework was already there, moving
the option allows for better error reporting.
Reported-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Build all executables by default except for the known-broken ones.
This also allows running qemu-iotests without manually building
socket_scm_helper.
Reported-by: Max Reitz <mreitz@redhat.com>
Tested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With upcoming Spice server version 0.14.4, the monitor configuration can
contain additional fields for the monitor physical dimensions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduced in commit 9c956e6461 ("spice:
prepare for upcoming spice-server change"), the new logic never
materialized in the spice server source tree. Let's remove it for now,
until it actually changes in Spice.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-5-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The following patch is going to introduce extra fields / details to
UIInfo. Add a getter and keep the current values, instead of memset(0)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Handle the spice special case in audio_init instead.
With the qemu_spice_audio_init() symbol dependency being
gone we can build spiceaudio as module.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200916084117.21828-2-kraxel@redhat.com
One of the goals of having less boilerplate on QOM declarations
is to avoid human error. Requiring an extra argument that is
never used is an opportunity for mistakes.
Remove the unused argument from OBJECT_DECLARE_TYPE and
OBJECT_DECLARE_SIMPLE_TYPE.
Coccinelle patch used to convert all users of the macros:
@@
declarer name OBJECT_DECLARE_TYPE;
identifier InstanceType, ClassType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_TYPE(InstanceType, ClassType,
- lowercase,
UPPERCASE);
@@
declarer name OBJECT_DECLARE_SIMPLE_TYPE;
identifier InstanceType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_SIMPLE_TYPE(InstanceType,
- lowercase,
UPPERCASE);
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200916182519.415636-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The requirement to specify the parent class type makes the macro
harder to use and easy to misuse (silent bugs can be introduced
if the wrong struct type is specified).
Simplify the macro by just not declaring any class struct,
allowing us to remove the class_size field from the TypeInfo
variables for those types.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200916182519.415636-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We only need to forward-declare kbd_push_key() and kbd_get_leds()
which are used in kbd_interface, not kbd_leds(). Remove this
superfluous forward declaration.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200909171145.350360-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of scripts/cleanup-trace-events.pl. Funnies
requiring manual post-processing:
* accel/tcg/cputlb.c trace points are in trace-events.
* block.c and blockdev.c trace points are in block/trace-events.
* hw/block/nvme.c uses the preprocessor to hide its trace point use
from cleanup-trace-events.pl.
* hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to
guard debug code.
* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.
* linux-user/trace-events abbreviates a tedious list of filenames to
*/signal.c.
* net/colo-compare and net/filter-rewriter.c use pseudo trace points
colo_compare_miscompare and colo_filter_rewriter_debug to guard
debug code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806141334.3646302-5-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
All Meson executables should specify their dependencies explicitly, either
directly or indirectly via declare_dependency. Makefiles instead did
not propagate dependencies correctly from static libraries, for example.
Therefore, flags for dependencies need not be included in QEMU_CFLAGS.
LIBS is not used at all, so drop that one as well.
In a few cases the dependencies were not yet specified, so add them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nikola reported on Windows when gd_vc_gfx_init() is called, the
window is not yet realized, so we run gd_refresh_rate_millihz(NULL)
which returns 0 milli-Hertz.
When a Widget is realized, it fires a 'realized' event. We already
have the gd_draw_event() handler registered for this even, so simply
move the gd_refresh_rate_millihz() there. When the event fires, the
window is known to exist.
This completes commit c4c00922cc original intention.
Reported-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Tested-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200817172331.598255-1-philmd@redhat.com
Suggested-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Tested-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add support for SIDE and EXTRA buttons.
The constants for buttons in both SPICE and QEMU are defined as
LEFT
MIDDLE
RIGHT
UP
DOWN
SIDE
EXTRA
(same order).
"button_mask" contains for each bit the state of a button. Qemu currently
uses bits 0, 1, 2 respectively as LEFT, RIGHT, MIDDLE; also add bits 4
and 5 as UP and DOWN (using wheel movements). SPICE protocol uses
a bitmask based on the order above where LEFT is bit 0, MIDDLE is
bit 1 and so on till EXTRA being bit 6. To avoid clash with Qemu usage
SPICE bitmask from SIDE are move a bit more resulting respectively
in 0x40 and 0x80 values.
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Message-id: 20200820145851.50846-1-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Receiving error in local variable err, and forgot to free it.
This patch check the return value of 'gdk_window_create_gl_context'
and 'gdk_gl_context_realize', then free err to fix it.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200831134315.1221-6-pannengyuan@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pixman used to be included directly in QEMU_CFLAGS and therefore the
include path was added to every compiler invocation. Now that (just
like basically everything else) it is a separate dependency, we
need to add it to all build target, especially UI modules that need
it due to their including ui/console.h.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the superfluous break, as there is a "return" before.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>a
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1594631086-36509-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Prevously CONFIG_VTE was not required to build QEMU with GTK UI support as not
all platforms have VTE available (in particular Windows).
Remove this requirement from the meson build system to enable QEMU to be built
with GTK UI support for Windows once again.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When pixman is not installed (or too old), but virglrenderer is available
and "configure" has been run with "--disable-system", the build currently
aborts when trying to compile vhost-user-gpu (since it requires pixman).
Let's skip the build of vhost-user-gpu when pixman is not installed or
too old. Instead of adding CONFIG_PIXMAN, it is simpler to move the
detection to pixman.
Based on a patch by Thomas Huth. <thuth@redhat.com>
Fixes: 9b52b17ba5 ("configure: Allow to build tools without pixman")
Reported-by: Rafael Kitover <rkitover@gmail.com>
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Note that sl and sv keymaps were not created by qemu-keymap.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that they
are built before everything else and they are available when first
building the .c files.
Alternatively you can use a fine-grained dependency, e.g.
target/arm/translate.o: target/arm/decode-neon-shared.inc.c
With Meson you have only one choice and it is a third option, namely
"build at the beginning of the corresponding target"; the way you
express it is to list the includes in the sources of that target.
The problem is that Meson decides if something is a source vs. a
generated include by looking at the extension: '.c', '.cc', '.m', '.C'
are sources, while everything else is considered an include---including
'.inc.c'.
Use '.c.inc' to avoid this, as it is consistent with our other convention
of using '.rst.inc' for included reStructuredText files. The editorconfig
file is adjusted.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case the string doesn't fit into the buffer snprintf returns the size
it would need, so len can be larger than the buffer. Fix this by simply
using g_strdup_printf() instead of a static buffer.
Reported-by: Wenxiang Qian <leonwxqian@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200701181801.27935-1-kraxel@redhat.com
GCC supports "#pragma GCC diagnostic" since version 4.6, and
Clang seems to support it, too, since its early versions 3.x.
That means that our minimum required compiler versions all support
this pragma already and we can remove the test from configure and
all the related #ifdefs in the code.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200710045515.25986-1-thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
move the vcpu throttling functionality into its own module.
This functionality is not specific to any accelerator,
and it is used currently by migration to slow down guests to try to
have migrations converge, and by the cocoa MacOS UI to throttle speed.
cpu-throttle contains the controls to adjust and inspect throttle
settings, start (set) and stop vcpu throttling, and the throttling
function itself that is run periodically on vcpus to make them take a nap.
Execution of the throttling function on all vcpus is triggered by a timer,
registered at module initialization.
No functionality change.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200629093504.3228-3-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The object_property_set_FOO() setters take property name and value in
an unusual order:
void object_property_set_FOO(Object *obj, FOO_TYPE value,
const char *name, Error **errp)
Having to pass value before name feels grating. Swap them.
Same for object_property_set(), object_property_get(), and
object_property_parse().
Convert callers with this Coccinelle script:
@@
identifier fun = {
object_property_get, object_property_parse, object_property_set_str,
object_property_set_link, object_property_set_bool,
object_property_set_int, object_property_set_uint, object_property_set,
object_property_set_qobject
};
expression obj, v, name, errp;
@@
- fun(obj, v, name, errp)
+ fun(obj, name, v, errp)
Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information". Convert that one manually.
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually. The other files using RXCPU that way don't need
conversion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
Pass &error_abort instead of NULL where the returned value is
dereferenced or asserted to be non-null. Drop a now redundant
assertion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-24-armbru@redhat.com>
vnc_display_print_local_addr() leaks the Error object when
qio_channel_socket_get_local_address() fails. Seems unlikely. Called
when we create a VNC display with vnc_display_open(). Plug the leak
by passing NULL to ignore the error.
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-12-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Receiving the error in a local variable only to free it is less clear
(and also less efficient) than passing NULL. Clean up.
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Jerome Forissier <jerome@forissier.org>
CC: Greg Kurz <groug@kaod.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200630090351.1247703-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The buffer is the captured input to pass to backends.
As we should not modify it, mark the argument const.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200505132603.8575-3-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Based on a mail on the qemu-devel mailing list at
https://lists.nongnu.org/archive/html/qemu-devel/2020-05/msg02909.html
and some internet research the GTK3 versions on supported
platforms are:
RHEL-7.4: 3.22.10
RHEL-7.5: 3.22.26
Debian (Stretch): 3.22.11
Debian (Buster): 3.24.5
OpenBSD (Ports): 3.22.30
FreeBSD (Ports): 3.22.29
OpenSUSE Leap 15: 3.22.30
SLE12-SP2: Unknown
SLE15: 3.22.30
Ubuntu (Bionic): 3.22.30
Ubuntu (Focal): 3.24.18
macOS (Homebrew): 3.22.30
This justifies increasing the minimum required GTK version in
QEMU to 3.22.0.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-11-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since GTK 3.22 the function gdk_event_get_scancode() is
available. On Windows this function returns keyboard scancodes
and some extended flags. These raw keyboard scancodes are much
better suited for this use case than the half-cooked win32
virtual-key codes because scancodes report the key position on
the keyboard and the positions are independent of national
language settings.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-10-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Without keyboard grab Windows currently handles the two win keys
and the key events are also sent to the guest. This is undesir-
able. Only one program should handle key events. This patch ap-
plies commit c68f74b02e "win32: do not handle win keys when the
keyboard is not grabbed" from project spice-gtk to ui/gtk.c to
fix this problem.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-9-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QEMU with SDL 1.2 display used to enable keyboard and mouse grab-
bing when started in full screen. The SDL 2.0 code tries to do
the same but fails to enable grabbing because sdl_grab_start(0)
returns early. To do it's work the sdl_grab_start() function
needs a pointer to a sdl2_console structure.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-7-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Wire up the keyboard hooking code on Windows to fix the AltGr
key and improve keyboard grabbing.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-6-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since the removal of GTK2 code in commit 89d85cde75 the code
around ignore_keys is unused. See commit 1a01716a30 "gtk: Avoid
accel key leakage into guest on console switch" why it was only
needed for GTK2.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-5-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This code was last used before commit 2ec78706d1 "ui: convert
GTK and SDL1 frontends to keycodemapdb".
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no way to grab the Ctrl-Alt-Del key combination on
Windows. This key combination will leave all three keys in a
stuck condition. This patch uses the grab-broken-event to
release the keys.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Wire up the keyboard hooking code on Windows to fix the AltGr
key and improve keyboard grabbing.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-2-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Import win32 keyboard hooking code from project spice-gtk. This
patch removes the extra left control key up/down input events
inserted by Windows for the right alt key up/down input events
with international keyboard layouts. Additionally there's some
code to grab the keyboard.
The next patches will use this code.
Only Windows needs this.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
I found SDL_GetWindowFromID() sometimes return NULL when I start qemu via
ssh forwarding even the window has been crated already. I am not sure
whether this is a bug of SDL, but we'd better check it carefully.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Message-id: 20200427132412.17909-1-changbin.du@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
-----BEGIN PGP SIGNATURE-----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=ibgH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging
trivial patches (20200504)
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
# gpg: Signature made Mon 04 May 2020 16:45:18 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-5.1-pull-request:
hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning
hw/timer/stm32f2xx_timer: Remove dead assignment
hw/gpio/aspeed_gpio: Remove dead assignment
hw/isa/i82378: Remove dead assignment
hw/ide/sii3112: Remove dead assignment
hw/input/adb-kbd: Remove dead assignment
hw/i2c/pm_smbus: Remove dead assignment
blockdev: Remove dead assignment
block: Avoid dead assignment
Compress lines for immediate return
chardev: Add macOS to list of OSes that support -chardev serial
MAINTAINERS: Update Keith Busch's email address
elf_ops: Don't try to g_mapped_file_unref(NULL)
hw/mem/pc-dimm: Fix line over 80 characters warning
hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug()
MAINTAINERS: Mark the LatticeMico32 target as orphan
timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write()
display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32()
scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- ran regexp "qemu_mutex_lock\(.*\).*\n.*if" to find targets
- replaced result with QEMU_LOCK_GUARD if all unlocks at function end
- replaced result with WITH_QEMU_LOCK_GUARD if unlock not at end
Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20200404042108.389635-3-dnbrdsky@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Compress two lines into a single line if immediate return statement is found.
It also remove variables progress, val, data, ret and sock
as they are no longer needed.
Remove space between function "mixer_load" and '(' to fix the
checkpatch.pl error:-
ERROR: space prohibited between function name and open parenthesis '('
Done using following coccinelle script:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Simran Singhal <singhalsimran0@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200401165314.GA3213@simran-Inspiron-5558>
[lv: in handle_aiocb_write_zeroes_unmap() move "int ret" inside the #ifdef]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix warnings reported by Clang static code analyzer:
CC ui/input-linux.o
ui/input-linux.c:343:9: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGBIT(EV_REL, sizeof(relmap)), &relmap);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ui/input-linux.c:351:9: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGBIT(EV_ABS, sizeof(absmap)), &absmap);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ui/input-linux.c:354:13: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGABS(ABS_X), &absinfo);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ui/input-linux.c:357:13: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGABS(ABS_Y), &absinfo);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ui/input-linux.c:365:9: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGBIT(EV_KEY, sizeof(keymap)), keymap);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ui/input-linux.c:366:9: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGKEY(sizeof(keystate)), keystate);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200322161219.17757-1-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We only need these arrays when using the curses display.
Move them from the .bss to the .heap (sizes reported on
x86_64 host: screen[] is 64KiB, vga_to_curses 7KiB).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As we only use this array as input, make it const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Traditionally, the uint-specific property helpers only offer getters.
When adding object (or class) uint types, one must therefore use the
generic property helper if a setter is needed (and probably duplicate
some code writing their own getters/setters).
This enhances the uint-specific property helper APIs by adding a
bitwise-or'd 'flags' field and modifying all clients of that API to set
this paramater to OBJ_PROP_FLAG_READ. This maintains the current
behaviour whilst allowing others to also set OBJ_PROP_FLAG_WRITE (or use
the more convenient OBJ_PROP_FLAG_READWRITE) in the future (which will
automatically install a setter). Other flags may be added later.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We want to stop generating the old qemu-doc.html; first we
must update places that refer to it so they instead go to
our top level index.html documentation landing page.
The Cocoa UI has a menu option to bring up the documentation;
make it point to the new top level index.html instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-31-peter.maydell@linaro.org
Fixes: 6105683da3
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-11-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
misc.json contains definitions that are related to the system emulator,
so it can't be used for other tools like the storage daemon. This patch
moves basic functionality that is shared between all tools (and mostly
related to the monitor itself) into a new control.json, which could be
used in tools as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-3-kwolf@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Our official OSX support policy covers the last two released versions.
Currently that is 10.14 and 10.15. We also may work on older versions, but
don't guarantee it.
In commit 50290c002c in mid-2019 we introduced some uses of
CLOCK_MONOTONIC which incidentally broke compilation for pre-10.12 OSX
versions (see LP:1861551). We don't intend to fix that, so we might
as well drop the code in ui/cocoa.m which caters for pre-10.12
versions as well. (For reference, 10.11 fell out of Apple extended
security support in September 2018.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200201170534.22123-1-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When specified just set null_cursor to NULL so we get the default
pointer instead of a blank pointer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use DisplayOpts settings to set the new file-global cursor_hide
variable, stop using the qemu-global cursor_hide variable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use DisplayOpts settings instead of cursor_hide global variable.
Also make "-display sdl,show-cursor=on" work.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
gtk_widget_get_window() returns NULL if the widget's window is not
realized, and QEMU crashes. Example under gtk 3.22.30 (mate 1.20.1):
qemu-system-x86_64: Gdk: gdk_window_get_origin: assertion 'GDK_IS_WINDOW (window)' failed
(gdb) bt
#0 0x00007ffff496cf70 in gdk_window_get_origin () from /usr/lib64/libgdk-3.so.0
#1 0x00007ffff49582a0 in gdk_display_get_monitor_at_window () from /usr/lib64/libgdk-3.so.0
#2 0x0000555555bb73e2 in gd_refresh_rate_millihz (window=0x5555579d6280) at ui/gtk.c:1973
#3 gd_vc_gfx_init (view_menu=0x5555579f0590, group=0x0, idx=0, con=<optimized out>, vc=0x5555579d4a90, s=0x5555579d49f0) at ui/gtk.c:2048
#4 gd_create_menu_view (s=0x5555579d49f0) at ui/gtk.c:2149
#5 gd_create_menus (s=0x5555579d49f0) at ui/gtk.c:2188
#6 gtk_display_init (ds=<optimized out>, opts=0x55555661ed80 <dpy>) at ui/gtk.c:2256
#7 0x000055555583d5a0 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4358
Fixes: c4c00922cc and 28b58f19d2 (display/gtk: get proper refreshrate)
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jan Kiszka <jan.kiszka@web.de>
Message-id: 20200208161048.11311-3-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit c388f408b5 added the possibility to list the display
backends using '-display help'. Since the 'none' backend is
is not implemented as a DisplayChangeListenerOps, it is not
registered to the dpys[] array with qemu_display_register(),
and is not listed in the help output.
This might be confusing, as we list it in the man page:
-display type
Select type of display to use. This option is a replacement for
the old style -sdl/-curses/... options. Valid values for type are
none
Do not display video output. The guest will still see an
emulated graphics card, but its output will not be displayed
to the QEMU user. This option differs from the -nographic
option in that it only affects what is done with video
output; -nographic also changes the destination of the serial
and parallel port data.
Fix by manually listing the special 'none' backend in the help.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20200120192947.31613-1-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In my investigation, ZRLE always compresses better than ZLIB so
prioritize ZRLE over ZLIB, even if the client hints that ZLIB is
preferred.
zlib buffer is always reset in zrle_compress_data(), so using offset to
calculate next_out and avail_out is useless.
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Message-Id: <b5d129895d08a90d0a2a6183b95875bacfa998b8.1579582674.git.dirty@apple.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit de3f7de7f4.
Remove VNC optimization to reencode framebuffer update as raw if it's
smaller than the default encoding.
QEMU's implementation was naive and didn't account for the ZLIB z_stream
mutating with each compression. Because of the mutation, simply
resetting the output buffer's offset wasn't sufficient to "rewind" the
operation. The mutated z_stream would generate future zlib blocks which
referred to symbols in past blocks which weren't sent. This would lead
to artifacting.
Considering that ZRLE is never larger than raw and even though ZLIB can
occasionally be fractionally larger than raw, the overhead of
implementing this optimization correctly isn't worth it.
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit c4c00922cc introduced the use of the GdkMonitor API, which
was introduced in GTK+ 3.22:
https://developer.gnome.org/gdk3/stable/api-index-3-22.html#api-index-3.22
Unfortunately this break building with older versions, as on Ubuntu
Xenial which provides GTK+ 3.18:
$ lsb_release -cd
Description: Ubuntu 16.04.5 LTS
Codename: xenial
$ ./configure && make
GTK support yes (3.18.9)
GTK GL support no
[...]
CC ui/gtk.o
qemu/ui/gtk.c: In function ‘gd_vc_gfx_init’:
qemu/ui/gtk.c:1973:5: error: unknown type name ‘GdkMonitor’
GdkMonitor *monitor = gdk_display_get_monitor_at_window(dpy, win);
^
qemu/ui/gtk.c:1973:27: error: implicit declaration of function ‘gdk_display_get_monitor_at_window’ [-Werror=implicit-function-declaration]
GdkMonitor *monitor = gdk_display_get_monitor_at_window(dpy, win);
^
qemu/ui/gtk.c:1973:5: error: nested extern declaration of ‘gdk_display_get_monitor_at_window’ [-Werror=nested-externs]
GdkMonitor *monitor = gdk_display_get_monitor_at_window(dpy, win);
^
qemu/ui/gtk.c:1973:27: error: initialization makes pointer from integer without a cast [-Werror=int-conversion]
GdkMonitor *monitor = gdk_display_get_monitor_at_window(dpy, win);
^
qemu/ui/gtk.c:2035:28: error: implicit declaration of function ‘gdk_monitor_get_refresh_rate’ [-Werror=implicit-function-declaration]
refresh_rate_millihz = gdk_monitor_get_refresh_rate(monitor);
^
qemu/ui/gtk.c:2035:5: error: nested extern declaration of ‘gdk_monitor_get_refresh_rate’ [-Werror=nested-externs]
refresh_rate_millihz = gdk_monitor_get_refresh_rate(monitor);
^
cc1: all warnings being treated as errors
qemu/rules.mak:69: recipe for target 'ui/gtk.o' failed
make: *** [ui/gtk.o] Error 1
GTK+ provides convenient definition in <gdk/gdkversionmacros.h>
(already include by <gdk/gdk.h>) to check which API are available.
We only use the GdkMonitor API to get the monitor refresh rate.
Extract this code as a new gd_refresh_rate_millihz() function,
and check GDK_VERSION_3_22 is defined before calling its API.
If it is not defined, return 0. This is safe and fixes our build
failure (see https://travis-ci.org/qemu/qemu/builds/636992508).
Reported-by: Travis-CI
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200116115413.31650-1-philmd@redhat.com
Fixes: c4c00922cc (display/gtk: get proper refreshrate)
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because some VMs in QEMU can get GPU virtualization (using technologies
such as iGVT-g, as mentioned previously), they could produce a video
output that had a higher display refresh rate than of what the GTK
display was displaying. (fxp. Playing a video game inside of a Windows
VM at 60 Hz, while the output stood locked at 33 Hz because of defaults
set in include/ui/console.h)
Since QEMU does indeed have internal systems for determining frame
times as defined in ui/console.c.
The code checks for a variable called update_interval that it later
uses for time calculation. This variable, however, isn't defined
anywhere in ui/gtk.c and instead ui/console.c just sets it to
GUI_REFRESH_INTERVAL_DEFAULT which is 30
update_interval represents the number of milliseconds per display
refresh, and by doing some math we get that 1000/30 = 33.33... Hz
This creates the mentioned problem and what this patch does is that it
checks for the display refresh rate reported by GTK itself (we can take
this as a safe value) and just converts it back to a number of
milliseconds per display refresh.
Signed-off-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200108121342.29597-1-pavlica.nikola@gmail.com
[ kraxel: style tweak: add blank line between vars and code ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We already print availabled devices with "-device help", or available
backends with "-netdev help" or "-chardev help". Let's provide a way
for the users to query the available display backends, too.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200108144702.29969-1-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Don't attempt to remove /dev/fdset files.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The file opened for ppm_save() may be a /dev/fdset, in which case a
dup fd is added to the fdset. It should be removed by calling
qemu_close(), instead of the implicit close() on fclose().
I don't see a convenient way to solve that with stdio streams, so I
switched the code to QIOChannel which uses qemu_close().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will allow to pre-open the file before running the async finish
handler and avoid potential monitor fdset races.
(note: this is preliminary work for asynchronous screendump support)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a function to be called when a graphic update is done.
Declare the QXL renderer as async: render_update_cookie_num counts the
number of outstanding updates, and graphic_hw_update_done() is called
when it reaches none.
(note: this is preliminary work for asynchronous screendump support)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We don't need Error **, as all callers pass local Error object, which
isn't used after the call, or NULL. Use Error * instead.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191205174635.18758-6-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have a setenv() wrapper in os-win32.c that no one is actually using.
Drop it and change to g_setenv() uniformly.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1576074210-52834-7-git-send-email-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If we try to start QEMU with "-k en-us", qemu prints a message and exits
with:
qemu-system-i386: could not read keymap file: 'en-us'
It's because this function is called way too early, before
qemu_add_data_dir() is called, and so qemu_find_file() fails.
To fix that, move init_keyboard_layout() from the class init function to the
instance init function.
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20190923220658.27007-1-laurent@vivier.eu
Fixes: 6105683da3 ("ui: add an embedded Barrier client")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The current code does not correctly pass the color pair information to
setcchar(), it instead always passes zero. This results in the curses
output always being in white on black.
This patch fixes this by using PAIR_NUMBER() to retrieve the color pair
number from the chtype value, and then passes that value as an argument
to setcchar().
Signed-off-by: Matthew Kilgore <mattkilgore12@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20191004035338.25601-3-mattkilgore12@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The curses API provides the A_ATTRIBUTES and A_CHARTEXT bit masks for
getting the attributes and character parts of a chtype, respectively. We
should use provided constants instead of using 0xff.
Signed-off-by: Matthew Kilgore <mattkilgore12@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20191004035338.25601-2-mattkilgore12@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
macOS API documentation says that before applicationDidFinishLaunching
is called, any events will not be processed. However, some events are
fired before it is called in macOS Catalina. This causes deadlock of
iothread_lock in handleEvent while it will be released after the
app_started_sem is posted.
This patch avoids processing events before the app_started_sem is
posted to prevent this deadlock.
Buglink: https://bugs.launchpad.net/qemu/+bug/1847906
Signed-off-by: Hikaru Nishida <hikarupsp@gmail.com>
Message-id: 20191015010734.85229-1-hikarupsp@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently when qemu receives a vnc connect, it creates a 'VncState' to
represent this connection. In 'vnc_worker_thread_loop' it creates a
local 'VncState'. The connection 'VcnState' and local 'VncState' exchange
data in 'vnc_async_encoding_start' and 'vnc_async_encoding_end'.
In 'zrle_compress_data' it calls 'deflateInit2' to allocate the libz library
opaque data. The 'VncState' used in 'zrle_compress_data' is the local
'VncState'. In 'vnc_zrle_clear' it calls 'deflateEnd' to free the libz
library opaque data. The 'VncState' used in 'vnc_zrle_clear' is the connection
'VncState'. In currently implementation there will be a memory leak when the
vnc disconnect. Following is the asan output backtrack:
Direct leak of 29760 byte(s) in 5 object(s) allocated from:
0 0xffffa67ef3c3 in __interceptor_calloc (/lib64/libasan.so.4+0xd33c3)
1 0xffffa65071cb in g_malloc0 (/lib64/libglib-2.0.so.0+0x571cb)
2 0xffffa5e968f7 in deflateInit2_ (/lib64/libz.so.1+0x78f7)
3 0xaaaacec58613 in zrle_compress_data ui/vnc-enc-zrle.c:87
4 0xaaaacec58613 in zrle_send_framebuffer_update ui/vnc-enc-zrle.c:344
5 0xaaaacec34e77 in vnc_send_framebuffer_update ui/vnc.c:919
6 0xaaaacec5e023 in vnc_worker_thread_loop ui/vnc-jobs.c:271
7 0xaaaacec5e5e7 in vnc_worker_thread ui/vnc-jobs.c:340
8 0xaaaacee4d3c3 in qemu_thread_start util/qemu-thread-posix.c:502
9 0xffffa544e8bb in start_thread (/lib64/libpthread.so.0+0x78bb)
10 0xffffa53965cb in thread_start (/lib64/libc.so.6+0xd55cb)
This is because the opaque allocated in 'deflateInit2' is not freed in
'deflateEnd'. The reason is that the 'deflateEnd' calls 'deflateStateCheck'
and in the latter will check whether 's->strm != strm'(libz's data structure).
This check will be true so in 'deflateEnd' it just return 'Z_STREAM_ERROR' and
not free the data allocated in 'deflateInit2'.
The reason this happens is that the 'VncState' contains the whole 'VncZrle',
so when calling 'deflateInit2', the 's->strm' will be the local address.
So 's->strm != strm' will be true.
To fix this issue, we need to make 'zrle' of 'VncState' to be a pointer.
Then the connection 'VncState' and local 'VncState' exchange mechanism will
work as expection. The 'tight' of 'VncState' has the same issue, let's also turn
it to a pointer.
Reported-by: Ying Fang <fangying1@huawei.com>
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-id: 20190831153922.121308-1-liq3ea@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows to receive mouse and keyboard events from
a Barrier server.
This is enabled by adding the following parameter on the
command line
... -object input-barrier,id=$id,name=$name ...
Where $name is the name declared in the screens section of barrier.conf
The barrier server (barriers) must be configured and must run on the
local host.
For instance:
section: screens
localhost:
...
VM-1:
...
end
section: links
localhost:
right = VM-1
VM-1:
left = localhost
end
Then on the QEMU command line:
... -object input-barrier,id=barrie0,name=VM-1 ...
When the mouse will move out of the screen of the local host on
the right, the mouse and the keyboard will be grabbed and all
related events will be send to the guest OS.
This is usefull when qemu is configured without emulated graphic card
but with a VFIO attached graphic card.
More information about Barrier can be found at:
https://github.com/debauchee/barrier
This avoids to install the Barrier server in the guest OS,
for instance when it is not supported or during the installation.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20190906083812.29487-1-laurent@vivier.eu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix egl_fb_read() to use the (destination) surface size instead of the
(source) framebuffer source for glReadPixels. Pass the DisplaySurface
instead of the pixeldata pointer to egl_fb_read() to make this possible.
With that in place framebuffer reads work fine even if the surface and
framebuffer sizes don't match, so we can remove the guest-triggerable
asserts in egl_scanout_flush().
Buglink: https://bugzilla.redhat.com//show_bug.cgi?id=1749659
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190909073911.24787-1-kraxel@redhat.com