Used for files which (with CONFIG_SPICE=y) depend on spice header files
to pick up some enum, but which do not depend on on the actual spice
shared library.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201014121120.13482-6-kraxel@redhat.com
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
Handle the spice special case in audio_init instead.
With the qemu_spice_audio_init() symbol dependency being
gone we can build spiceaudio as module.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200916084117.21828-2-kraxel@redhat.com
Run the downstream playback queue even if there are no samples
in the mixing engine buffer. The downstream queue may still have
queued samples.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-7-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function audio_generic_write should work exactly like
audio_pcm_hw_run_out. It's a very similar function working on a
different buffer.
This patch significantly reduces the number of drop-outs with
the DirectSound backend. To hear the difference start qemu with
-audiodev dsound,id=audio0,out.mixing-engine=off and play a
song in the guest with and without this patch.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-6-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch removes unnecessary calls to the pcm_ops function
put_buffer_in(). No audio backend needs this call if the
returned length of pcm_ops function get_buffer_in() is zero.
For the DirectSound backend this prevents a call to
dsound_unlock_in() without a preceding call to dsound_lock_in().
While Windows doesn't complain it seems wrong anyway.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-5-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function audio_generic_read should work exactly like
audio_pcm_hw_run_in. It's a very similar function working
on a different buffer.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The playback rate with the spiceaudio backend is currently too
fast if there's no spice client connected or the spice client
can't play audio. Rate limit the audio playback stream in all
cases. To calculate the rate correctly the limiter has to know
the maximum buffer size.
Fixes: 8c198ff065 ("spiceaudio: port to the new audio backend api")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch allows the audio backends get_buffer_out() functions
to drop audio data and mitigates a bug reported on the qemu-devel
mailing list.
https://lists.nongnu.org/archive/html/qemu-devel/2020-09/msg03832.html
The new rules for the variables buf and size returned by
get_buffer_out() are:
size == 0: Downstream playback buffer is full. Retry later.
size > 0, buf != NULL: Copy size bytes to buf for playback.
size > 0, buf == NULL: Drop size bytes.
The audio playback rate with spiceaudio for the no audio case is
too fast, but that's what we had before commit fb35c2cec5
"audio/dsound: fix invalid parameters error". The complete fix
comes with the next patch.
Reported-by: Qi Zhou <atmgnd@outlook.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-2-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With the next patch all audio backends put_buffer_out() functions
have to handle the buf == NULL case, provided the get_buffer_out()
function may return buf = NULL and size > 0.
It turns out that all audio backends get_buffer_out() functions
either can't return buf = NULL or return buf = NULL and size = 0
at the same time. The only exception is the spiceaudio backend
where size may be uninitialized.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennee <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-2-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Tracked down with the help of scripts/cleanup-trace-events.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20200806141334.3646302-4-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In function oss_read() a read error currently does not exit the
read loop. With no data to read the variable pos will quickly
underflow and a subsequent successful read overwrites memory
outside the buffer. This patch adds the missing break statement
to the error path of the function.
To reproduce start qemu with -audiodev oss,id=audio0 and in the
guest start audio recording. After some time this will trigger
an exception.
Fixes: 3ba4066d08 "ossaudio: port to the new audio backend api"
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200707180836.5435-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
See recent commit "error: Document Error API usage rules" for
rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-18-armbru@redhat.com>
Instead of checking for the audodev state in each code path, centralize
the check into the initialize function itself to make it safe to call it
at any time.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-id: 20200613040518.38172-7-geoff@hostfission.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When the guest closes the audio device we must start dropping input
samples from JACK and zeroing the output buffer samples. Failure to do
so causes sound artifacts during operations such as guest OS reboot, and
causes a hang of the input pipeline breaking it until QEMU is restated.
Closing and reconnecting to JACK was tested during these enable/disable
calls which works well for Linux guests, however Windows re-opens the
audio hardware repeatedly even when doing simple tasks like playing a
system sounds. As such it was decided it is better to feed silence to
JACK while the device is disabled.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-id: 20200613040518.38172-6-geoff@hostfission.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This fixes a hang when there is a communications issue with the JACK
server. Simply closing the connection is enough to completely clean up
and as such we do not need to remove the ports first. As JACK uses a
socket based protocol that relies on the `select` call, if there is a
communication breakdown with the server the client library waits
forever for a response to the unregister request.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-id: 20200613040518.38172-5-geoff@hostfission.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Initial code for JACK did not support audio input and as such this
boolean was set to let QEMU know, however JACK ended up including input
support making this invalid. Further investigation shows it was invalid
to set it in the first instance anyway due to a failure on my part
understand properly what this was for when the audodev was initially
developed.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-id: 20200613040518.38172-4-geoff@hostfission.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
JACK does not provide us with the configured buffer size until after
activiation which was overriding this minimum value. JACK itself doesn't
have this minimum limitation, but the QEMU virtual hardware and as such
it must be enforced, failure to do so results in audio discontinuities.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-id: 20200613040518.38172-2-geoff@hostfission.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The buffer is the captured input to pass to backends.
As we should not modify it, mark the argument const.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200505132603.8575-3-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The samples are the input to convert to u64. As we should
not modify them, mark the argument const.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200505132603.8575-2-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 571a8c522e caused the HMP wavcapture command to segfault when
processing audio data in audio_pcm_sw_write(), where a NULL
sw->hw->pcm_ops is dereferenced. This fix checks that the pointer is
valid before dereferincing it. A similar fix is also made in the
parallel function audio_pcm_sw_read().
Fixes: 571a8c522e (audio: split ctl_* functions into enable_* and
volume_*)
Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200521172931.121903-1-brogers@suse.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The code in CONV_NATURAL_FLOAT() and CLIP_NATURAL_FLOAT()
seems to use the constant 2^31-0.5 to convert float to integer
and back. But the float type lacks the required precision and
the constant used for the conversion is 2^31. This is equiva-
lent to a [-1.f, 1.f] <-> [INT32_MIN, INT32_MAX + 1] mapping.
This patch explicitly writes down the used constant. The
compiler generated code doesn't change.
The constant 2^31 has an exact float representation and the
clang 10 compiler stops complaining about an implicit int to
float conversion with a changed value.
A few notes:
- The conversion of 1.f to INT32_MAX + 1 doesn't overflow. The
type of the destination variable is int64_t.
- At a later stage one of the clip_* functions in
audio/mixeng_template.h limits INT32_MAX + 1 to the integer
range.
- The clip_natural_float_* functions in audio/mixeng.c convert
INT32_MAX and INT32_MAX + 1 to 1.f.
Buglink: https://bugs.launchpad.net/bugs/1878627
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200523201712.23908-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This commit adds a new audiodev backend to allow QEMU to use JACK as
both an audio sink and source.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-Id: <20200512101603.E3DB73A038E@moya.office.hostfission.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch prevents an underflow of variable samples in function
audio_pcm_hw_run_in(). See commit 599eac4e5a "audio:
audio_generic_get_buffer_in should honor *size". This time the
while loop in audio_pcm_hw_run_in() will terminate nevertheless,
because it seems the recording stream in Windows is always rate
limited.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200405075017.9901-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
IDirectSoundCaptureBuffer_Lock() fails on Windows when called
with len = 0. Return early from dsound_get_buffer_in() in this
case.
To reproduce the warning start a linux guest. In the guest
start Audacity and you will see a lot of "Could not lock
capture buffer" warnings.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200405075017.9901-2-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the DirectSound backend fails to stop audio playback
in dsound_enable_out(). To detect a lost buffer condition
dsound_get_status_out() incorrectly uses the error code
DSERR_BUFFERLOST instead of flag DSBSTATUS_BUFFERLOST as a mask
and returns with an error. As a result dsound_enable_out()
returns early and doesn't stop playback.
To reproduce the bug start qemu on a Windows host with
-soundhw pcspk -audiodev dsound,id=audio0. On the guest
FreeDOS 1.2 command line enter beep. The image Day 1 - F-Bird
from the QEMU Advent Calendar 2018 shows the bug as well.
Buglink: https://bugs.launchpad.net/qemu/+bug/1699628
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200405075017.9901-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The current positive limit for the saturation nonlinearity is
only correct if the type of the result has 8 bits or less.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200308193321.20668-5-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the internal float range of the mixing engine is
[-.5f, .5f]. PulseAudio, SDL2 and libasound use a [-1.f, 1.f]
range. This means with float samples the audio playback volume
is 6dB too low and audio recording signals will be clipped in
most cases.
To avoid another scaling factor in the conv_natural_float_* and
clip_natural_float_* functions with FLOAT_MIXENG defined this
patch changes the mixing engine float range to [-1.f, 1.f].
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200308193321.20668-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Change the clip_natural_float_from_mono() function in
audio/mixeng.c to be consistent with the clip_*_from_mono()
functions in audio/mixeng_template.h.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200308193321.20668-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch changes the naming scheme of the FLOAT_CONV_TO and
FLOAT_CONV_FROM macros to the scheme used in mixeng_template.h.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200308193321.20668-2-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes: 286a5d201e
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This adds proper support for float samples in mixeng by adding a new
audio format for it.
Limitations: only native endianness is supported. None of the virtual
sound cards support float samples (it looks like most of them only
support 8 and 16 bit, only hda supports 32 bit), it is only used for the
audio backends (i.e. host side).
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 8a8b0b5698401b78d3c4c8ec90aef83b95babb06.1580672076.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are reports that since commit 2ceb8240fa "coreaudio: port
to the new audio backend api" audio playback with CoreAudio is
broken. This patch reverts some parts the commit.
Because of changes in the audio subsystem the audio clip
function in v4.1.0 of coreaudio.c had to be moved to mixeng.c
and the generic buffer management code needed a hint about the
size of the float type.
This patch is based on a patch from Zoltán Kővágó found at
https://lists.nongnu.org/archive/html/qemu-devel/2020-01/msg02142.html.
Fixes: 2ceb8240fa "coreaudio: port to the new audio backend api"
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200202140641.4737-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Windows (unlike wine) bails out when IDirectSoundBuffer8::Lock is called
with zero length. Also, hw->pos_emul handling was incorrect when
calling this function for the first time.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reported-by: KJ Liew <liewkj@yahoo.com>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Message-id: fe9744216d9d421a2dbb09bcf5fa0dbd18f77ac5.1580684275.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function generic_get_buffer_in currently ignores the *size
parameter and may return a buffer larger than *size.
As a result the variable samples in function
audio_pcm_hw_run_in may underflow. The while loop then most
likely will never termiate.
Buglink: http://bugs.debian.org/948658
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200123074943.6699-9-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently there is no way to disable poll mode in
oss_enable_out and oss_enable_in when it was enabled before.
The enable code path always resets the poll mode state variable.
Fixes: b027a538c6 "oss: Remove unused error handling of qemu_set_fd_handler"
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200123074943.6699-8-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With audiodev parameter out.mixing-engine=off hw->mix_buf is
NULL. This patch reverts a small part of dc88e38fa7 "audio:
unify input and output mixeng buffer management".
To reproduce the problem start qemu with
-audiodev oss,id=audio0,try-mmap=on,out.mixing-engine=off
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200123074943.6699-6-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The combined generic buffer management code and buffer run out
code in function audio_generic_put_buffer_out has a problematic
behaviour. A few hundred milliseconds after playback starts the
mixing buffer and the generic buffer are nearly full and the
following pattern can be seen.
On first call of audio_pcm_hw_run_out the buffer run code in
audio_generic_put_buffer_out writes some data to the audio
hardware but the generic buffer will fill faster and is full
when audio_pcm_hw_run_out returns. This is because emulated
audio devices can produce playback data at a higher rate than
the audio backend hardware consumes this data.
On next call of audio_pcm_hw_run_out the buffer run code in
audio_generic_put_buffer_out writes some data to the audio
hardware but no audio data is transferred to the generic buffer
because the buffer is already full.
Then the pattern repeats. For the emulated audio device this
looks like the audio timer period has doubled.
This patch splits the combined generic buffer management code
and buffer run out code and calls the buffer run out code after
buffer management code to break this pattern.
The bug report is for the wav audio backend. But the problem is
not limited to this backend. All audio backends which use the
audio_generic_put_buffer_out function show this problem.
Buglink: https://bugs.launchpad.net/qemu/+bug/1858488
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200123074943.6699-5-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With audiodev parameter out.mixing-engine=off hw->mix_buf is
NULL. This leads to a segmentation fault in
AUD_get_buffer_size_out. This patch reverts a small part of
dc88e38fa7 "audio: unify input and output mixeng buffer
management".
To reproduce the problem start qemu with
-soundhw adlib -audiodev pa,id=audio0,out.mixing-engine=off
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200123074943.6699-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The unused variables were last used before commit 49ddd7e122
"paaudio: port to the new audio backend api".
Fixes: 49ddd7e122
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200123074943.6699-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It seems the function audio_generic_read started as a copy of
function audio_generic_write and some necessary changes were
forgotten. Fix the mixed up source and destination pointers and
rename misnamed variables.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200123074943.6699-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The pcm_ops function put_buffer_out expects the returned pointer
of function get_buffer_out as argument. Fix this.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200123074943.6699-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes: 3ba4066d08 ("ossaudio: port to the new audio backend api")
Reported-by: ziming zhang <ezrakiez@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200120101804.29578-1-kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When building with GCC9 using CFLAG -Wimplicit-fallthrough=2 we get:
audio/audio.c: In function ‘audio_pcm_init_info’:
audio/audio.c:306:14: error: this statement may fall through [-Werror=implicit-fallthrough=]
306 | sign = 1;
| ~~~~~^~~
audio/audio.c:307:5: note: here
307 | case AUDIO_FORMAT_U8:
| ^~~~
cc1: all warnings being treated as errors
Similarly to e46349414, add the missing fall through comment to
hint GCC.
Fixes: 2b9cce8c8c
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20191218192526.13845-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tell the compiler to do a 32bit * 32bit -> 64bit multiplication
because period_ticks is a 64bit variable. The overflow occurs
for audio timer periods larger than 4294967us.
Fixes: be1092afa0 "audio: fix audio timer rate conversion bug"
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 8893a235-66a8-8fbe-7d95-862e29da90b1@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Don't call pa_stream_peek before the recording stream is ready.
Information to reproduce the problem.
Start and stop Audacity in the guest several times because the
problem is racy.
libvirt log file:
-audiodev pa,id=audio0,server=localhost,out.latency=30000,
out.mixing-engine=off,in.mixing-engine=off \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,
resourcecontrol=deny \
-msg timestamp=on
: Domain id=4 is tainted: custom-argv
char device redirected to /dev/pts/1 (label charserial0)
audio: Device pcspk: audiodev default parameter is deprecated,
please specify audiodev=audio0
audio: Device hda: audiodev default parameter is deprecated,
please specify audiodev=audio0
pulseaudio: pa_stream_peek failed
pulseaudio: Reason: Bad state
pulseaudio: pa_stream_peek failed
pulseaudio: Reason: Bad state
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200104091122.13971-5-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no guarantee a single call to pa_stream_peek every
timer_period microseconds can read a recording stream faster
than the data gets produced at the source. Let qpa_read try to
drain the recording stream.
To reproduce the problem:
Start qemu with -audiodev pa,id=audio0,in.mixing-engine=off
On the host connect the qemu recording stream to the monitor of
a hardware output device. While the problem can also be seen
with a hardware input device, it's obvious with the monitor of
a hardware output device.
In the guest start audio recording with audacity and notice the
slow recording data rate.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200104091122.13971-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Every call to pa_stream_peek which returns a data length > 0
should have a corresponding pa_stream_drop. A call to qpa_read
does not necessarily call pa_stream_drop immediately after a
call to pa_stream_peek. Test in qpa_fini_in if a last
pa_stream_drop is needed.
This prevents following messages in the libvirt log file after
a recording stream gets closed and a new one opened.
pulseaudio: pa_stream_drop failed
pulseaudio: Reason: Bad state
pulseaudio: pa_stream_drop failed
pulseaudio: Reason: Bad state
To reproduce start qemu with
-audiodev pa,id=audio0,in.mixing-engine=off
and in the guest start and stop Audacity several times.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200104091122.13971-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With current code audio recording with all audio backends
except PulseAudio and DirectSound is broken. The generic audio
recording buffer management forgot to update the current read
position after a read.
Fixes: ff095e5231 "audio: api for mixeng code free backends"
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Zoltán Kővágó <DirtY.iCE.hu@gmail.com>
Message-id: 2fc947cf-7b42-de68-3f11-cbcf1c096be9@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Which currently only means removing some checks. Old code won't require
more than two channels, but new code will need it.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 7e53be1f97e939ed3bb729ef39e76b775643118a.1570996490.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The bit shifting trick worked because the number of bytes per frame was
always a power-of-two (since QEMU only supports mono, stereo and 8, 16
and 32 bit samples). But if we want to add support for surround sound,
this no longer holds true.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 1351fd9bcce0ff20d81850c5292722194329de02.1570996490.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This can be used to identify stream in tools like pavucontrol when one
creates multiple -audiodevs or runs multiple qemu instances.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 2d6e337c474ac84172d0809e6959c26b21d48120.1568157545.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Connection name was previously erroneously set to the server socket
path, while connection names were simply "qemu". After this patch, the
connection name will be the vm name (falling back to "qemu" if not
specified), while stream names will be the audiodev's id.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 3d139426031a400a68d440608ba5e43f0e116cd8.1568157545.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This way we no longer need vararg functions, improving compile time
error detection. Also now it's possible to check actually what commands
are supported, without needing to manually update ctl_caps.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 2b08b3773569c5be055d0a0fb2f29ff64e79f0f4.1568927990.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This commit removes the ad-hoc rate-limiting code from noaudio and
wavaudio, and replaces them with a (slightly modified) code from
spiceaudio. This way multiple write calls (for example when the
circular buffer wraps around) do not cause problems.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: fd0fe5b95b13fa26d09ae77a72f99d0ea411de14.1568927990.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Usage notes: hw->samples became hw->{mix,conv}_buf->size, except before
initialization (audio_pcm_hw_alloc_resources_*), hw->samples gives the
initial size of the STSampleBuffer. The next commit tries to fix this
inconsistency.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: a78caeb2eeb6348ecb45bb2c81709570ef8ac5b3.1568927990.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This will make it possible to skip mixeng with audio playback and
recording, allowing us to free ourselves from the limitations of the
current mixeng (stereo, int64 samples only). In this case, HW and SW
voices will be essentially the same, for every SW voice we will create
a HW voice, since we can no longer mix multiple voices together.
Some backends expect us to call a function when we have data ready
write()/read() style, while others provide a buffer and expects us to
directly write/read it, so for optimal performance audio_pcm_ops provide
methods for both cases. Previously backends asked mixeng for more data
in run_out/run_it, now instead mixeng or the frontends will call the
backends, so that's why two sets of functions required. audio.c
contains glue code between the two styles, so backends only ever have to
implement one style and frontends are free to call whichever is more
convenient for them.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 15a33c03a62228922d851f7324c52f73cb8d2414.1568927990.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Unfortunately, changes introduced in af2041ed2d "audio: audiodev=
parameters no longer optional when -audiodev present" breaks backward
compatibility. This patch changes the error into a deprecation warning.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 02d4328c33455742d01e0b62395013e95293c3ba.1566847960.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The code used sizeof(AudiodevAlsaPerDirectionOptions) instead of the
appropriate per direction options for the audio backend. If the size of
the actual audiodev's per direction options are larger than alsa's, it
could cause a buffer overflow.
However, alsa has three fields in per direction options: a string, an
uint32 and a bool. Oss has the same fields, coreaudio has a single
uint32, paaudio has a string and an uint32, all other backends only use
the common options, so currently no per direction options struct should
be larger than alsa's.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-Id: <7808bc816ba7da8b8de8a214713444d85f7af3c6.1566847960.git.DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
They just called audio_pcm_sw_read/write anyway, so it makes no sense
to have them too. (The noaudio's read is the only exception, but it
should work with the generic code too.)
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 92ddc98133bc4b687c6e4608b9321e7b64c0e496.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pulseaudio normally assumes that when the server wants it, the client
can generate the audio samples and send it right away. Unfortunately
this is not the case with QEMU -- it's up to the emulated system when
does it generate the samples. Buffering the samples and sending them
from a background thread is just a workaround, that doesn't work too
well. Instead enable pa's compatibility support and let pa worry about
the details.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: aa4e3613122ccbaa62b1feb4e427260731f7477c.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
audio_run is called manually by alsa and oss backends when polling.
In this case only the requesting backend should be run, not all of them.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 10221fcea2028fa18d95cf531526ffe3b1d9b21a.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There's already a MIN and MAX macro in include/qemu/osdep.h, use them
instead.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 303222477df6f7373217e0df768635fab5855745.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Unless we disable stream moving, pulseaudio can easily move the stream
on connect, effectively ignoring the source/sink specified by the user.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: c245929463e6e46a48b2875a150815e2ccba11b4.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This means you should probably stop using -soundhw (as it doesn't allow
you to specify any options) and add the device manually with -device.
The exception is pcspk, it's currently not possible to manually add it.
To use it with audiodev, use something like this:
-audiodev id=foo,... -global isa-pcspk.audiodev=foo -soundhw pcspk
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 9072b955acffda13976bca7b61f86d7f708c9269.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Have a pool of refcounted connections per server, so if the user creates
multiple audiodevs to the same pa server, it will use a single connection. (It
will still create different streams, so the user can manage those streams
separately in pulseaudio.)
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: d43218f327c62cdbd16ea0c922612025fbc4805e.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Finally add audiodev= options to audio frontends so users can specify
which backend to use when multiple backends exist. Not specifying an
audiodev= option currently causes the first audiodev to be used, this is
fixed in the next commit.
Example usage: -audiodev pa,id=foo -device AC97,audiodev=foo
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: d64db52dda2d0e9d97bc5ab1dd9adf724280fea1.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Audio functions no longer access glob_audio_state, instead they get an
AudioState as a parameter. This is required in order to support
multiple backends.
glob_audio_state is also gone, and replaced with a tailq so we can store
more than one states.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 67aef54f9e729a7160fe95c465351115e392164b.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove glob_audio_state from functions, where possible without breaking
the API. This means that most static functions in audio.c now take an
AudioState pointer instead of implicitly using glob_audio_state. Also
included a pointer in SWVoice*, HWVoice* structs, so that functions
dealing them can know the audio state without having to pass it around
separately.
This is required in order to support multiple simultaneous audio
backends (added in a later commit).
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: b5e241f24e795267b145bcde7c6a72dd5e6037ea.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get VMStateDescription. The previous commit made
that unnecessary.
Include migration/vmstate.h only where it's still needed. Touching it
now recompiles only some 1600 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
