The test aarch64 kernel is in an array defined with
unsigned char aarch64_kernel[] = { [...] }
which means it could be any size; currently it's quite small.
However we write it to a file using init_bootfile(), which
writes exactly 512 bytes to the file. This will break if
we ever end up with a kernel larger than that, and will
read garbage off the end of the array in the current setup
where the kernel is smaller.
Make init_bootfile() take an argument giving the length of
the data to write. This allows us to use it for all architectures
(previously s390 had a special-purpose init_bootfile_s390x
which hardcoded the file to write so it could write the
correct length). We assert that the x86 bootfile really is
exactly 512 bytes as it should be (and as we were previously
just assuming it was).
This was detected by the clang-7 asan:
==15607==ERROR: AddressSanitizer: global-buffer-overflow on address 0x55a796f51d20 at pc 0x55a796b89c2f bp 0x7ffc58e89160 sp 0x7ffc58e88908
READ of size 512 at 0x55a796f51d20 thread T0
#0 0x55a796b89c2e in fwrite (/home/petmay01/linaro/qemu-from-laptop/qemu/build/sanitizers/tests/migration-test+0xb0c2e)
#1 0x55a796c46492 in init_bootfile /home/petmay01/linaro/qemu-from-laptop/qemu/tests/migration-test.c:99:5
#2 0x55a796c46492 in test_migrate_start /home/petmay01/linaro/qemu-from-laptop/qemu/tests/migration-test.c:593
#3 0x55a796c44101 in test_baddest /home/petmay01/linaro/qemu-from-laptop/qemu/tests/migration-test.c:854:9
#4 0x7f906ffd3cc9 (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x72cc9)
#5 0x7f906ffd3bfa (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x72bfa)
#6 0x7f906ffd3bfa (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x72bfa)
#7 0x7f906ffd3ea1 in g_test_run_suite (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x72ea1)
#8 0x7f906ffd3ec0 in g_test_run (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x72ec0)
#9 0x55a796c43707 in main /home/petmay01/linaro/qemu-from-laptop/qemu/tests/migration-test.c:1187:11
#10 0x7f906e9abb96 in __libc_start_main /build/glibc-OTsEL5/glibc-2.27/csu/../csu/libc-start.c:310
#11 0x55a796b6c2d9 in _start (/home/petmay01/linaro/qemu-from-laptop/qemu/build/sanitizers/tests/migration-test+0x932d9)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190702150311.20467-1-peter.maydell@linaro.org
Off by one error in the EL2 and EL3 tests. Remove the test
against EL3 entirely, since it must always be true.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190702104732.31154-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdH7FgAAoJEL/70l94x66DdUUH+gLr/ZdjLIdfYy9cjcnevf4E
cJlxdaW9KvUsK2uVgqQ/3b1yF+GCGk10n6n8ZTIbClhs+6NpqEMz5O3FA/Na6FGA
48M2DwJaJ2H9AG/lQBlSBNUZfLsEJ9rWy7DHvNut5XMJFuWGwdtF/jRhUm3KqaRq
vAaOgcQHbzHU9W8r1NJ7l6pnPebeO7S0JQV+82T/ITTz2gEBDUkJ36boO6fedkVQ
jLb9nZyG3CJXHm2WlxGO4hkqbLFzURnCi6imOh2rMdD8BCu1eIVl59tD1lC/A0xv
Pp3xXnv9SgJXsV4/I/N3/nU85ZhGVMPQZXkxaajHPtJJ0rQq7FAG8PJMEj9yPe8=
=poke
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Bugfixes.
# gpg: Signature made Fri 05 Jul 2019 21:21:52 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
ioapic: use irq number instead of vector in ioapic_eoi_broadcast
hw/i386: Fix linker error when ISAPC is disabled
Makefile: generate header file with the list of devices enabled
target/i386: kvm: Fix when nested state is needed for migration
minikconf: do not include variables from MINIKCONF_ARGS in config-all-devices.mak
target/i386: fix feature check in hyperv-stub.c
ioapic: clear irq_eoi when updating the ioapic redirect table entry
intel_iommu: Fix unexpected unmaps during global unmap
intel_iommu: Fix incorrect "end" for vtd_address_space_unmap
i386/kvm: Fix build with -m32
checkpatch: do not warn for multiline parenthesized returned value
pc: fix possible NULL pointer dereference in pc_machine_get_device_memory_region_size()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* CPU die topology support (Like Xu)
* Deprecation of features (Igor Mammedov):
* 'mem' parameter of '-numa node' option
* implict memory distribution between NUMA nodes
* deprecate -mem-path fallback to anonymous RAM
* x86 versioned CPU models (Eduardo Habkost)
* SnowRidge CPU model (Paul Lai)
* Add deprecation information to query-machines (Eduardo Habkost)
* Other i386 fixes
-----BEGIN PGP SIGNATURE-----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=NAyM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
Machine and x86 queue, 2019-07-05
* CPU die topology support (Like Xu)
* Deprecation of features (Igor Mammedov):
* 'mem' parameter of '-numa node' option
* implict memory distribution between NUMA nodes
* deprecate -mem-path fallback to anonymous RAM
* x86 versioned CPU models (Eduardo Habkost)
* SnowRidge CPU model (Paul Lai)
* Add deprecation information to query-machines (Eduardo Habkost)
* Other i386 fixes
# gpg: Signature made Fri 05 Jul 2019 23:12:09 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request: (42 commits)
tests: use -numa memdev option in tests instead of legacy 'mem' option
numa: allow memory-less nodes when using memdev as backend
numa: Make deprecation warnings conditional on !qtest_enabled()
i386: Add Cascadelake-Server-v2 CPU model
docs: Deprecate CPU model runnability guarantees
i386: Make unversioned CPU models be aliases
i386: Replace -noTSX, -IBRS, -IBPB CPU models with aliases
i386: Define -IBRS, -noTSX, -IBRS versions of CPU models
i386: Register versioned CPU models
i386: Get model-id from CPU object on "-cpu help"
i386: Add x-force-features option for testing
qmp: Add "alias-of" field to query-cpu-definitions
i386: Introduce SnowRidge CPU model
qmp: Add deprecation information to query-machines
vl.c: Add -smp, dies=* command line support and update doc
machine: Refactor smp_parse() in vl.c as MachineClass::smp_parse()
target/i386: Add CPUID.1F generation support for multi-dies PCMachine
i386: Remove unused host_cpudef variable
x86/cpu: use FeatureWordArray to define filtered_features
i386: make 'hv-spinlocks' a regular uint32 property
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When emulating irqchip in qemu, such as following command:
x86_64-softmmu/qemu-system-x86_64 -m 1024 -smp 4 -hda /home/test/test.img
-machine kernel-irqchip=off --enable-kvm -vnc :0 -device edu -monitor stdio
We will get a crash with following asan output:
(qemu) /home/test/qemu5/qemu/hw/intc/ioapic.c:266:27: runtime error: index 35 out of bounds for type 'int [24]'
=================================================================
==113504==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61b000003114 at pc 0x5579e3c7a80f bp 0x7fd004bf8c10 sp 0x7fd004bf8c00
WRITE of size 4 at 0x61b000003114 thread T4
#0 0x5579e3c7a80e in ioapic_eoi_broadcast /home/test/qemu5/qemu/hw/intc/ioapic.c:266
#1 0x5579e3c6f480 in apic_eoi /home/test/qemu5/qemu/hw/intc/apic.c:428
#2 0x5579e3c720a7 in apic_mem_write /home/test/qemu5/qemu/hw/intc/apic.c:802
#3 0x5579e3b1e31a in memory_region_write_accessor /home/test/qemu5/qemu/memory.c:503
#4 0x5579e3b1e6a2 in access_with_adjusted_size /home/test/qemu5/qemu/memory.c:569
#5 0x5579e3b28d77 in memory_region_dispatch_write /home/test/qemu5/qemu/memory.c:1497
#6 0x5579e3a1b36b in flatview_write_continue /home/test/qemu5/qemu/exec.c:3323
#7 0x5579e3a1b633 in flatview_write /home/test/qemu5/qemu/exec.c:3362
#8 0x5579e3a1bcb1 in address_space_write /home/test/qemu5/qemu/exec.c:3452
#9 0x5579e3a1bd03 in address_space_rw /home/test/qemu5/qemu/exec.c:3463
#10 0x5579e3b8b979 in kvm_cpu_exec /home/test/qemu5/qemu/accel/kvm/kvm-all.c:2045
#11 0x5579e3ae4499 in qemu_kvm_cpu_thread_fn /home/test/qemu5/qemu/cpus.c:1287
#12 0x5579e4cbdb9f in qemu_thread_start util/qemu-thread-posix.c:502
#13 0x7fd0146376da in start_thread (/lib/x86_64-linux-gnu/libpthread.so.0+0x76da)
#14 0x7fd01436088e in __clone (/lib/x86_64-linux-gnu/libc.so.6+0x12188e
This is because in ioapic_eoi_broadcast function, we uses 'vector' to
index the 's->irq_eoi'. To fix this, we should uses the irq number.
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190622002119.126834-1-liq3ea@163.com>
v2: include config-devices.h to use CONFIG_IDE_ISA
Message-Id: <20190705143554.10295-2-julio.montes@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Julio Montes <julio.montes@intel.com>
v2: generate config-devices.h which contains the list of devices enabled
Message-Id: <20190705143554.10295-1-julio.montes@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Julio Montes <julio.montes@intel.com>
When vCPU is in VMX operation and enters SMM mode,
it temporarily exits VMX operation but KVM maintained nested-state
still stores the VMXON region physical address, i.e. even when the
vCPU is in SMM mode then (nested_state->hdr.vmx.vmxon_pa != -1ull).
Therefore, there is no need to explicitly check for
KVM_STATE_NESTED_SMM_VMXON to determine if it is necessary
to save nested-state as part of migration stream.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190624230514.53326-1-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When minikconf writes config-devices.mak, it includes all variables including
those from MINIKCONF_ARGS. This causes values from config-host.mak to "stick" to
the ones used in generating config-devices.mak, because config-devices.mak is
included after config-host.mak. Avoid this by omitting assignments coming
from the command line in the output of minikconf.
Reported-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Tested-by: Christophe de Dinechin <dinechin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 2d384d7c8 broken the build when built with:
configure --without-default-devices --disable-user
The reason was the conversion of cpu->hyperv_synic to
cpu->hyperv_synic_kvm_only although the rest of the patch introduces a
feature checking mechanism. So I've fixed the KVM_EXIT_HYPERV_SYNIC in
hyperv-stub to do the same feature check as in the real hyperv.c
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20190624123835.28869-1-alex.bennee@linaro.org>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
irq_eoi is used to count the number of irq injected during eoi
broadcast. It should be set to 0 when updating the ioapic's redirect
table entry.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190624151635.22494-1-liq3ea@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is an replacement work of Yan Zhao's patch:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg625340.html
vtd_address_space_unmap() will do proper page mask alignment to make
sure each IOTLB message will have correct masks for notification
messages (2^N-1), but sometimes it can be expanded to even supercede
the registered range. That could lead to unexpected UNMAP of already
mapped regions in some other notifiers.
Instead of doing mindless expension of the start address and address
mask, we split the range into smaller ones and guarantee that each
small range will have correct masks (2^N-1) and at the same time we
should also try our best to generate as less IOTLB messages as
possible.
Reported-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Message-Id: <20190624091811.30412-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
IOMMUNotifier is with inclusive ranges, so we should check
against (VTD_ADDRESS_SIZE(s->aw_bits) - 1).
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
[peterx: split from another bigger patch]
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190624091811.30412-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
find_next_bit() takes a pointer of type "const unsigned long *", but the
first argument passed here is a "uint64_t *". These types are
incompatible when compiling qemu with -m32.
Just use ctz64() instead.
Fixes: c686193072
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190624193913.28343-1-mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While indeed we do not want to have
return (a);
it is less clear that this applies to
return (a &&
b);
Some editors indent more nicely if you have parentheses, and some people's
eyes may appreciate that as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1561116534-21814-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU will crash when device-memory-region-size property is read if ms->device_memory
wasn't initialized yet.
Crash can be reproduced with:
$QEMU -preconfig -qmp unix:qmp_socket,server,nowait &
./scripts/qmp/qom-get -s qmp_socket /machine.device-memory-region-size
Instead of crashing return 0 if ms->device_memory hasn't been initialized.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1560174635-22602-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
it will test preferred memdev option more extensively and remove
undesired deprecation warnings during 'make check'
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190702140745.27767-3-imammedo@redhat.com>
[ehabkost: remove numa-test.c changes]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
QEMU fails to start if memory-less node is present when memdev
is used
qemu-system-x86_64 -object memory-backend-ram,id=ram0,size=128M \
-numa node -numa node,memdev=ram0
with error:
"memdev option must be specified for either all or no nodes"
which works as expected if legacy 'mem' is used.
Fix check to make memory-less nodes valid when memdev option is used
but still disallow mix of mem and memdev options.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190702140745.27767-2-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will help us avoid spurious warnings during "make check".
Note that this will silence the warnings generated by
tests/numa-test, but not the ones generated by
tests/bios-tables-test. We still need to change
tests/bios-tables-test to use "-numa ...,memdev=" to silence
these warnings.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190702215726.23661-1-ehabkost@redhat.com>
Add new version of Cascadelake-Server CPU model, setting
stepping=5 and enabling the IA32_ARCH_CAPABILITIES MSR
with some flags.
The new feature will introduce a new host software requirement,
breaking our CPU model runnability promises. This means we can't
enable the new CPU model version by default in QEMU 4.1, because
management software isn't ready yet to resolve CPU model aliases.
This is why "pc-*-4.1" will keep returning Cascadelake-Server-v1
if "-cpu Cascadelake-Server" is specified.
Includes a test case to ensure the right combinations of
machine-type + CPU model + command-line feature flags will work
as expected.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-10-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190703221723.8161-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Document that CPU model runnability guarantees won't apply to
unversioned CPU models anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-9-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will make unversioned CPU models behavior depend on the
machine type:
* "pc-*-4.0" and older will not report them as aliases.
This is done to keep compatibility with older QEMU versions
after management software starts translating aliases.
* "pc-*-4.1" will translate unversioned CPU models to -v1.
This is done to keep compatibility with existing management
software, that still relies on CPU model runnability promises.
* "none" will translate unversioned CPU models to their latest
version. This is planned become the default in future machine
types (probably in pc-*-4.3).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-8-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The old CPU models will be just aliases for specific versions of
the original CPU models.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-7-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add versions of CPU models that are equivalent to their -IBRS,
-noTSX and -IBRS variants.
The separate variants will eventually be removed and become
aliases for these CPU versions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-6-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add support for registration of multiple versions of CPU models.
The existing CPU models will be registered with a "-v1" suffix.
The -noTSX, -IBRS, and -IBPB CPU model variants will become
versions of the original models in a separate patch, so
make sure we register no versions for them.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-5-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When introducing versioned CPU models, the string at
X86CPUDefinition::model_id might not be the model-id we'll really
use. Instantiate a CPU object and check the model-id property on
"-cpu help"
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-4-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a new option that can be used to disable feature flag
filtering. This will allow CPU model compatibility test cases to
work without host hardware dependencies.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-3-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Management software will be expected to resolve CPU model name
aliases using the new field.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-2-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
SnowRidge CPU supports Accelerator Infrastrcture Architecture (MOVDIRI,
MOVDIR64B), CLDEMOTE and SPLIT_LOCK_DISABLE.
MOVDIRI, MOVDIR64B, and CLDEMOTE are found via CPUID.
The availability of SPLIT_LOCK_DISABLE is check via msr access
References can be found in either:
https://software.intel.com/en-us/articles/intel-sdmhttps://software.intel.com/en-us/download/intel-architecture-instruction-set-extensions-and-future-features-programming-reference
Signed-off-by: Paul Lai <paul.c.lai@intel.com>
Tested-by: Tao3 Xu <tao3.xu@intel.com>
Message-Id: <20190626162129.25345-1-paul.c.lai@intel.com>
[ehabkost: squashed SPLIT_LOCK_DETECT patch]
Message-Id: <20190626163232.25711-1-paul.c.lai@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Export machine type deprecation status through the query-machines
QMP command. With this, libvirt and management software will be
able to show this information to users and/or suggest changes to
VM configuration to avoid deprecated machines.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190608233447.27970-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
For PC target, users could configure the number of dies per one package
via command line with this patch, such as "-smp dies=2,cores=4".
The parsing rules of new cpu-topology model obey the same restrictions/logic
as the legacy socket/core/thread model especially on missing values computing.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190620054525.37188-4-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To make smp_parse() more flexible and expansive, a smp_parse function
pointer is added to MachineClass that machine types could override.
The generic smp_parse() code in vl.c is moved to hw/core/machine.c, and
become the default implementation of MachineClass::smp_parse. A PC-specific
function called pc_smp_parse() has been added to hw/i386/pc.c, which in
this patch changes nothing against the default one .
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190620054525.37188-3-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The CPUID.1F as Intel V2 Extended Topology Enumeration Leaf would be
exposed if guests want to emulate multiple software-visible die within
each package. Per Intel's SDM, the 0x1f is a superset of 0xb, thus they
can be generated by almost same code as 0xb except die_offset setting.
If the number of dies per package is greater than 1, the cpuid_min_level
would be adjusted to 0x1f regardless of whether the host supports CPUID.1F.
Likewise, the CPUID.1F wouldn't be exposed if env->nr_dies < 2.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190620054525.37188-2-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The variable is completely unused, probably a leftover from
previous code clean up.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190625050008.12789-3-ehabkost@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use the same definition as features/user_features in CPUX86State.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190620023746.9869-1-richardw.yang@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
X86CPU.hv-spinlocks is a uint32 property that has a special setter
validating the value to be no less than 0xFFF and no bigger than
UINT_MAX. The latter check is redundant; as for the former, there
appears to be no reason to prohibit the user from setting it to a lower
value.
So nuke the dedicated getter/setter pair and convert 'hv-spinlocks' to a
regular uint32 property.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20190618110659.14744-1-rkagan@virtuozzo.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The current default value for hv-spinlocks is 0xFFFFFFFF (meaning
"never retry"). However, the value is stored as a signed
integer, making the getter of the hv-spinlocks QOM property
return -1 instead of 0xFFFFFFFF.
Fix this by changing the type of X86CPU::hyperv_spinlock_attempts
to uint32_t. This has no visible effect to guest operating
systems, affecting just the behavior of the QOM getter.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190615200505.31348-1-ehabkost@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
If cpu->host_phys_bits_limit is set, QEMU will make
cpu->phys_bits be lower than host_phys_bits on some cases. This
triggers a warning that was supposed to be printed only if
phys-bits was explicitly set in the command-line.
Reorder the code so the value of cpu->phys_bits is validated
before the cpu->host_phys_bits handling. This will avoid
unexpected warnings when cpu->host_phys_bits_limit is set.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190611205420.20286-1-ehabkost@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Fallback might affect guest or worse whole host performance
or functionality if backing file were used to share guest RAM
with another process.
Patch deprecates fallback so that we could remove it in future
and ensure that QEMU will provide expected behavior and fail if
it can't use user provided backing file.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190626074228.11558-1-imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
hppa_cpu_list() is dead code and is never called. Delete it.
Cc: Richard Henderson <rth@twiddle.net>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190517191332.23400-1-ehabkost@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Implicit RAM distribution between nodes has exactly the same issues as:
"numa: deprecate 'mem' parameter of '-numa node' option"
only with QEMU being the user that's 'adding' 'mem' parameter.
Deprecate it, to get it out of the way so that we could consolidate
guest RAM allocation using memory backends making it consistent and
possibly later on transition to using memory devices instead of
adhoc memory mapping for the initial RAM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1559205199-233510-4-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The parameter allows to configure fake NUMA topology where guest
VM simulates NUMA topology but not actually getting performance
benefits from it. The same or better results could be achieved
using 'memdev' parameter.
Beside of unpredictable performance, '-numa node.mem' option has
other issues when it's used with combination of -mem-path +
+ -mem-prealloc + memdev backends (pc-dimm), breaking binding of
memdev backends since mem-path/mem-prealloc are global and affect
the most of RAM allocations.
It's possible to make memdevs and global -mem-path/mem-prealloc
to play nicely together but that will just complicate already
complicated code and add unobious ways it could break on 2
different memmory allocation pathes and their combinations.
Instead of it, consolidate all guest RAM allocation over memdev
which still allows to create fake NUMA configurations if desired
and leaves one simplifyed code path to consider when it comes
to guest RAM allocation.
To achieve desired simplification deprecate 'mem' parameter as its
ad-hoc partitioning of initial RAM MemoryRegion can't be translated
to memdev based backend transparently to users and in compatible
manner (migration wise).
Later down the road that will allow to consolidate means of how
guest RAM is allocated and would permit us to clean up quite
a bit memory allocations and numa code, leaving only 'memdev'
implementation in place.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1559205199-233510-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Legacy '-numa node,mem' option has a number of issues and mgmt often
defaults to it. Unfortunately it's no possible to replace it with
an alternative '-numa memdev' without breaking migration compatibility.
What's possible though is to deprecate it, keeping option working with
old machine types only.
In order to help users to find out if being deprecated CLI option
'-numa node,mem' is still supported by particular machine type, add new
"numa-mem-supported" property to output of query-machines.
"numa-mem-supported" is set to 'true' for machines that currently support
NUMA, but it will be flipped to 'false' later on, once deprecation period
expires and kept 'true' only for old machine types that used to support
the legacy option so it won't break existing configuration that are using
it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1560172207-378962-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
QEMU will crash when device-memory-region-size property is read if ms->device_memory
wasn't initialized yet.
Crash can be reproduced with:
$QEMU -preconfig -qmp unix:qmp_socket,server,nowait &
./scripts/qmp/qom-get -s qmp_socket /machine.device-memory-region-size
Instead of crashing return 0 if ms->device_memory hasn't been initialized.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190624090200.5383-1-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In new sockets/dies/cores/threads model, the apicid of logical cpu could
imply die level info of guest cpu topology thus x86_apicid_from_cpu_idx()
need to be refactored with #dies value, so does apicid_*_offset().
To keep semantic compatibility, the legacy pkg_offset which helps to
generate CPUIDs such as 0x3 for L3 cache should be mapping to die_offset.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190612084104.34984-5-like.xu@linux.intel.com>
[ehabkost: squash unit test patch]
Message-Id: <20190612084104.34984-6-like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The field die_id (default as 0) and has_die_id are introduced to X86CPU.
Following the legacy smp check rules, the die_id validity is added to
the same contexts as leagcy smp variables such as hmp_hotpluggable_cpus(),
machine_set_cpu_numa_node(), cpu_slot_to_string() and pc_cpu_pre_plug().
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190612084104.34984-4-like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To support multiple dies configuration on PCMachine, the best place to
set CPUX86State->nr_dies with requested PCMachineState->smp_dies is in
pc_new_cpu() and pc_cpu_pre_plug(). Refactoring pc_new_cpu() is applied
and redundant parameter "const char *typename" would be removed.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190612084104.34984-3-like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The die-level as the first PC-specific cpu topology is added to the leagcy
cpu topology model, which has one die per package implicitly and only the
numbers of sockets/cores/threads are configurable.
In the new model with die-level support, the total number of logical
processors (including offline) on board will be calculated as:
#cpus = #sockets * #dies * #cores * #threads
and considering compatibility, the default value for #dies would be
initialized to one in x86_cpu_initfn() and pc_machine_initfn().
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190612084104.34984-2-like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The global smp variables in vl.c are completely replaced with machine properties.
Form this commit, the smp_cpus/smp_cores/smp_threads/max_cpus are deprecated
and only machine properties within MachineState are fully applied and enabled.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-11-like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The global smp variables in alpha/hppa/mips/openrisc/sparc*/xtensa codes
are replaced with smp properties from MachineState.
A local variable of the same name would be introduced in the declaration
phase if it's used widely in the context OR replace it on the spot if it's
only used once. No semantic changes.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-10-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
