Commit 37c34d9d5d introduced a regression when
using relative mouse mode with a client that understands the PointerTypeChange
pseudo-encoding.
Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Reported-by: Gerhard Wiesinger <lists@wiesinger.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
updated version of an old patch
http://xenon.stanford.edu/~eswierk/misc/qemu-linuxbios/qemu-piix-ram-size.patch
that together with
http://www.mail-archive.com/linuxbios@linuxbios.org/msg02390.html
(which is already in coreboot trunk) allows coreboot to autodetect the amount of RAM within qemu/kvm from a register in i440 northbridge.
The message on the old patch states:
Unfortunately the current version of qemu does not set these
registers, but I have patched qemu so that it emulates the i440 more
faithfully in this regard.
Signed-off-by: Bernhard M. Wiedemann <qemudevbmw@lsmod.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Current code of monitor command: 'change', used to open file for read-write
uncoditionally. Change to open it as read-only for CDROM, and read-write for all others.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With three different make binaries I have available, configuring a
pristine QEMU tree and attempting to make gives the cryptic:
Makefile:27: *** missing separator. Stop.
This patch fixes it (presumably because it makes the output of
`set-vpath' be an empty string, rather than a bit of whitespace), but I
don't understand why this hasn't been a problem for other folks before.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The configure test of vhost uses KVM CFLAGS, so the build must use them
as well. Otherwise we specifically miss what --kerneldir provides.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's emitted when the Virtual Machine resumes execution.
We currently have the STOP event but don't have the matching
RESUME one, this means that clients are notified when the VM
is stopped but don't get anything when it resumes.
Let's fix that as it's already causing some trouble to libvirt.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently the commandline to create a virtual-filesystem pass-through between
the guest and the host is as follows:
#qemu -fsdev fstype,id=ID,path=path/to/share \
-device virtio-9p-pci,fsdev=ID,mount_tag=tag \
This patch provides a syntactic short-cut to achieve the same as follows:
#qemu -virtfs fstype,path=path/to/share,mount_tag=tag
This will be internally expanded as:
#qemu -fsdev fstype,id=tag,path=path/to/share, \
-device virtio-9p-pci,fsdev=tag,mount_tag=tag \
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Don't do anything special for flush.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Implement P9_TREMOVE support.
This gets file deletion to work.
[mohan@in.ibm.com: Fix truncate to use the relative path]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Implement P9_TWRITE support.
This gets write to file to work
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Implement P9_TSTAT support. This get the mount to work on the guest.
[kiran@linux.vnet.ibm.com: malloc to qemu_malloc conversion]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Implement P9_TVERSION support.
[sripathik@in.ibm.com: Handle unknown 9P versions as per the standards]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add helpers to obtain file stat and mode details.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Helper APIs for FID and QID management.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add minimal set of FileOperations and the corresponding implementations for
local fstype. These will be required for the FID management patches later on.
[aneesh.kumar@linux.vnet.ibm.com: rpath fix ]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add helpers to do string manipulation.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add helpers to process the PDUs.
[kiran@linux.vnet.ibm.com: malloc to qemu_malloc coversion]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch doesn't implement the 9p protocol handling
code. It adds a simple device which dump the protocol data.
[jvrao@linux.vnet.ibm.com: Little-Endian to host format conversion]
[aneesh.kumar@linux.vnet.ibm.com: Multiple-mounts support]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch creates a new command line option named -fsdev to hold any file
system specific information.
The option will currently hold the following attributes:
-fsdev fstype id=id,path=path_to_share
where
fstype: Type of the file system.
id: Identifier used to refer to this fsdev
path: The path on the host that is identified by this fsdev.
[aneesh.kumar@linux.vnet.ibm.com: Abstraction using FsContext]
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the flush_queued_data() function, we expect port to be valid. Assert
only for port and not port || discard.
Reported-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The packet(s) sent out after migration are supposed to be RAPR type of
packets. If they are supposed to go anywhere useful, the RAPR ethernet
identifier needs to be fix.
Also see http://www.iana.org/assignments/ethernet-numbers for 0x8035 for
RARP.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu_opts_create duplicates the id we pass in case it shall be stored in
the opts. So we do not need to dup it in qemu_opts_parse, leaking a few
bytes this way.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The LSI controller was lacking a system reset handler. Simply invoke the
existing soft reset handler in this case. This also allows to drop its
explicit invocation during init.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid keeping zombie requests across controller reset by purging the
queue and also dropping the currently active request.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The boot once options seems to have gotten broken since it originally
went in. We need to wait until the second time restore_boot_devices()
gets called before restoring the standard boot order and removing itself
from the reset list.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
--
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will allow to implement new encodings (tight, zrle, ..)
in a cleaner way. This may hurt performances, because some
functions like vnc_convert_pixel are not static anymore, but
should not be a problem with gcc 4.5 and the new -flto.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
cc1: warnings being treated as errors
vnc-auth-sasl.c: In function ‘vnc_client_write_sasl’:
vnc-auth-sasl.c:50: error: format ‘%d’ expects type ‘int’, but argument 4 has type ‘size_t’
vnc-auth-sasl.c:50: error: format ‘%d’ expects type ‘int’, but argument 5 has type ‘size_t’
make: *** [vnc-auth-sasl.o] Error 1
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
They aren't used afterwards nor supposed to be stored by a bdrv_create
handler.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img rebase must always give clusters in the COW file priority over those
in the backing file. As it failed to use number of non-allocated clusters but
assumed the maximum, it was possible that allocated clusters were taken from
the backing file instead, leading to a corrupted output image.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the wr_highest_sector blockstat which implements what is generally
known as the high watermark. It is the highest offset of a sector written to
the respective BlockDriverState since it has been opened.
The query-blockstat QMP command is extended to add this value to the result,
and also to add the statistics of the underlying protocol in a new "parent"
field. Note that to get the "high watermark" of a qcow2 image, you need to look
into the wr_highest_sector field of the parent (which can be a file, a
host_device, ...). The wr_highest_sector of the qcow2 BlockDriverState itself
is the highest offset on the _virtual_ disk that the guest has written to.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the ability to grow qcow2 images in-place using
bdrv_truncate(). This enables qemu-img resize command support for
qcow2.
Snapshots are not supported and bdrv_truncate() will return -ENOTSUP.
The notion of resizing an image with snapshots could lead to confusion:
users may expect snapshots to remain unchanged, but this is not possible
with the current qcow2 on-disk format where the header.size field is
global instead of per-snapshot. Others may expect snapshots to change
size along with the current image data. I think it is safest to not
support snapshots and perhaps add behavior later if there is a
consensus.
Backing images continue to work. If the image is now larger than its
backing image, zeroes are read when accessing beyond the end of the
backing image.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While it's true that during regular operation free_clusters failure would be a
bug, an I/O error can always happen. There's no need to kill the VM, the worst
thing that can happen (and it will) is that we leak some clusters.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a 'resize' command to grow/shrink disk images. This
allows changing the size of disk images without copying to a new image
file. Currently only raw files support resize.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BlockDriver bdrv_getlength function is called from the I/O code path
when checking that the request falls within the device. Unfortunately
this involves an lseek system call in the raw protocol; every read or
write request will incur this lseek cost.
Jan Kiszka <jan.kiszka@siemens.com> identified this issue and its
latency overhead. This patch caches device length in the existing
total_sectors variable so lseek calls can be avoided for fixed size
devices.
Growable devices fall back to the full bdrv_getlength code path because
I have not added logic to detect extending the size of the device in a
write.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch combines the lseek+read/write calls to use pread/pwrite
instead. This will result in fewer system calls and is already used by
AIO.
Thanks to Jan Kiszka <jan.kiszka@siemens.com> for identifying excessive
lseek and Christoph Hellwig <hch@lst.de> for confirming that this
approach should work.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The i loop iterator is shadowed by the next free cluster index. Both
using the variable name 'i' makes the code harder to read.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is safer to set backing_hd to NULL after deleting it so that any use
after deletion is obvious during development. Happy segfaulting!
This patch should be applied after Kevin Wolf's "vmdk: Convert to
bdrv_open" so that vmdk does not segfault on close.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>