'legacy_align' is always NULL, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-15-philmd@linaro.org>
'uuid_encoded' is always true, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-12-philmd@linaro.org>
This patch adds a new board attribute 'v-eiointc'.
A value of true enables the virt extended I/O interrupt controller.
VMs working in kvm mode have 'v-eiointc' enabled by default.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240528083855.1912757-4-gaosong@loongson.cn>
Use MemTxAttrs interface read_with_attrs/write_with_attrs
for virt_iocsr_misc_ops.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240528083855.1912757-3-gaosong@loongson.cn>
Add loongarch virt machine to the graph. It is a modified copy of
the existing riscv virtmachine in riscv-virt-machine.c
It contains a generic-pcihost controller, and an extra function
loongarch_config_qpci_bus() to configure GPEX pci host controller
information, such as ecam and pio_base addresses.
Also hotplug handle checking about TYPE_VIRTIO_IOMMU_PCI device is
added on loongarch virt machine, since virtio_mmu_pci device requires
it.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240528082053.938564-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Higher bits for memory nodes were omitted at qemu_fdt_setprop_cells.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240520-loongarch-fdt-memnode-v1-1-5ea9be93911e@flygoat.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Some qtest test cases such as numa use default memory size of generic
machine class, which is 128M by fault.
Here generic default memory size is used, and also remove minimum memory
size which is 1G originally.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240515093927.3453674-6-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
For system dram memory region, it is not necessary to use numa node
information. There is only low memory region and high memory region.
Remove numa node information for ddr memory region here, it can reduce
memory region number on LoongArch virt machine.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240515093927.3453674-5-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Memory map table for fwcfg is used for UEFI BIOS, UEFI BIOS uses the first
entry from fwcfg memory map as the first memory HOB, the second memory HOB
will be used if the first memory HOB is used up.
Memory map table for fwcfg does not care about numa node, however in
generic the first memory HOB is part of numa node0, so that runtime
memory of UEFI which is allocated from the first memory HOB is located
at numa node0.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240515093927.3453674-4-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
One LoongArch virt machine platform, there is limitation for memory
map information. The minimum memory size is 256M and minimum memory
size for numa node0 is 256M also. With qemu numa qtest, it is possible
that memory size of numa node0 is 128M.
Limitations for minimum memory size for both total memory and numa
node0 is removed for fadt numa memory table creation.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240515093927.3453674-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
One LoongArch virt machine platform, there is limitation for memory
map information. The minimum memory size is 256M and minimum memory
size for numa node0 is 256M also. With qemu numa qtest, it is possible
that memory size of numa node0 is 128M.
Limitations for minimum memory size for both total memory and numa
node0 is removed for acpi srat table creation.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240515093927.3453674-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
If VM runs in kvm mode, VM mode is added in IOCSR feature register.
So guest can detect kvm hypervisor type and enable possible pv functions.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240514025109.3238398-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Now that boards are enabled by default and the "CONFIG_FOO=y"
entries are gone from configs/devices/, there cannot be any more
a conflicts between the default contents of configs/devices/
and a failed "depends on" clause.
With this change, each individual board or target can express
whether it needs FDT. It can then include the common code in the
build via "select DEVICE_TREE", which will also as tell meson to link
with libfdt.
This allows building non-microvm x86 emulators without having
libfdt available.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid having to list dependencies such as libfdt twice, both on common_ss
and specific_ss. Instead, just take all the dependencies in common_ss
and allow the target-specific libqemu-*.fa library to use them.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZjyDAgAKCRBAov/yOSY+
33cfA/4jE0x+eLAT161caSwM3wBOfZRClfUhXdkxLP6GvWbACVQ8l0rEZiw2PuI8
DFReU2gqs7wAfYKt7Yy62xXlCw1B3aSUzE45gS2TGIP1GqKBwigvpW4i1SgiOoMX
4TA+GG16KgR9zaxO48bjjyJ1epc7S3SxdAL09p2U08D9EdSwCA==
=RLFu
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240509' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240509
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZjyDAgAKCRBAov/yOSY+
# 33cfA/4jE0x+eLAT161caSwM3wBOfZRClfUhXdkxLP6GvWbACVQ8l0rEZiw2PuI8
# DFReU2gqs7wAfYKt7Yy62xXlCw1B3aSUzE45gS2TGIP1GqKBwigvpW4i1SgiOoMX
# 4TA+GG16KgR9zaxO48bjjyJ1epc7S3SxdAL09p2U08D9EdSwCA==
# =RLFu
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 09 May 2024 10:02:10 AM CEST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240509' of https://gitlab.com/gaosong/qemu:
target/loongarch: Put cpucfg operation before CSR register
target/loongarch: Add TCG macro in structure CPUArchState
hw/loongarch: Refine default numa id calculation
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With numa_test test case, there is subcase named test_def_cpu_split(),
there are 8 sockets and 2 numa nodes. Here is command line:
"-machine smp.cpus=8,smp.sockets=8 -numa node,memdev=ram -numa node"
The required result is:
node 0 cpus: 0 2 4 6
node 1 cpus: 1 3 5 7
Test case numa_test fails on LoongArch, since the actual result is:
node 0 cpus: 0 1 2 3
node 1 cpus: 4 5 6 7
It will be better if all the cpus in one socket share the same numa
node. Here socket id is used to calculate numa id in function
virt_get_default_cpu_node_id().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240319022606.2994565-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
This device will be shared among LoongArch and MIPS
based Loongson machine, rename it as loongson_ipi
to reflect this nature.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508-loongson3-ipi-v1-2-1a7b67704664@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Rename LoongArchMachineState with LoongArchVirtMachineState, and change
variable name LoongArchMachineState *lams with LoongArchVirtMachineState
*lvms.
Rename function specific for virtmachine loongarch_xxx()
with virt_xxx(). However some common functions keep unchanged such as
loongarch_acpi_setup()/loongarch_load_kernel(), since there functions
can be used for real hw boards.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508031110.2507477-3-maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
On LoongArch system, there is only virt machine type now, name
LOONGARCH_MACHINE is confused, rename it with LOONGARCH_VIRT_MACHINE.
Machine name about Other real hw boards can be added in future.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508031110.2507477-2-maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The char pointer 'ramName' point to a block of memory,
but never free it. Use 'g_autofree' to automatically free it.
Resolves: Coverity CID 1544773
Fixes: 0cf1478d6 ("hw/loongarch: Add numa support")
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240507022239.3113987-1-gaosong@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Ensure that it can be used even if virt.c is not included in the build, as
is the case for --without-default-devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240507145135.270803-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Some targets use "default y" for boards to filter out those that require
TCG. For consistency we are switching all other targets to do the same.
Continue with Loongarch.
No changes to generated config-devices.mak file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
rtc node need interrupts and interrupt-parent cells.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-18-gaosong@loongson.cn>
uart node need interrupts and interrupt-parent cells.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-17-gaosong@loongson.cn>
This patch removes the unused fdt irqchip node.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-16-gaosong@loongson.cn>
This patch adds pcie irq_map node for FDT.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-15-gaosong@loongson.cn>
The efi_system_table adds a efi_fdt configuration table.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-9-gaosong@loongson.cn>
The efi_system_table adds a efi_initrd configuration table.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-8-gaosong@loongson.cn>
The efi_system_table adds a efi_boot_memmap configuration table.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-7-gaosong@loongson.cn>
Add init_systab and set boot_info->a2
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-6-gaosong@loongson.cn>
Add init_cmline and set boot_info->a0, a1
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-5-gaosong@loongson.cn>
Load the slave CPU boot code at pflash0 and set
the slave CPU elf_address to VIRT_FLASH0_BASE.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-4-gaosong@loongson.cn>
we load initrd ramdisk after kernel_high address
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-3-gaosong@loongson.cn>
Move some boot functions to boot.c and struct
loongarch_boot_info into struct LoongArchMachineState.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240426091551.2397867-2-gaosong@loongson.cn>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-14-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
clean up smbios_set_defaults() which is reused by legacy
and non legacy machines from being aware of 'legacy' notion
and need to turn it off. And push legacy handling up to
PC machine code where it's relevant.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Do not accept any Object for CPUArchId::cpu field,
restrict it to CPUState type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-3-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The UEFI loading mode in loongarch is very different
from that in other architectures:loongarch's UEFI code
is in rom, while other architectures' UEFI code is in flash.
loongarch UEFI can be loaded as follows:
-machine virt,pflash=pflash0-format
-bios ./QEMU_EFI.fd
Other architectures load UEFI using the following methods:
-machine virt,pflash0=pflash0-format,pflash1=pflash1-format
loongarch's UEFI loading method makes qemu and libvirt incompatible
when using NVRAM, and the cost of loongarch's current loading method
far outweighs the benefits, so we decided to use the same UEFI loading
scheme as other architectures.
Cc: Andrea Bolognani <abologna@redhat.com>
Cc: maobibo@loongson.cn
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Song Gao <gaosong@loongson.cn>
Cc: zhaotianrui@loongson.cn
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <0bd892aa9b88e0f4cc904cb70efd0251fc1cde29.1708336919.git.lixianglai@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
On LoongArch physical machine, one extioi interrupt controller only
supports 4 cpus. With processor more than 4 cpus, there are multiple
extioi interrupt controllers; if interrupts need to be routed to
other cpus, they are forwarded from extioi node0 to other extioi nodes.
On virt machine model, there is simple extioi interrupt device model.
All cpus can access register of extioi interrupt controller, however
interrupt can only be route to 4 vcpu for compatible with old kernel.
This patch adds dynamic cpu number support about extioi interrupt.
With old kernel legacy extioi model is used, however kernel can detect
and choose new route method in future, so that interrupt can be routed to
all vcpus.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231215100333.3933632-4-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
LoongArch system has iocsr address space, most iocsr registers are
per-board, however some iocsr register spaces banked for percpu such
as ipi mailbox and extioi interrupt status. For banked iocsr space,
each cpu has the same iocsr space, but separate data.
This patch changes iocsr address space per-board rather percpu,
for iocsr registers specified for cpu, MemTxAttrs.requester_id
can be parsed for the cpu. With this patches, the total address space
on board will be simple, only iocsr address space and system memory,
rather than the number of cpu and system memory.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231215100333.3933632-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231221031652.119827-39-richard.henderson@linaro.org>
sysbus_mmio_map() should not be called on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231018141151.87466-7-philmd@linaro.org>
