Access to QemuInputHandlerState::handler are read-only.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231017131251.43708-1-philmd@linaro.org>
This code seems to be used by vmport hack, passing these values allows
to implement horizontal scroll support even when using vmport.
In case it's not supported horizontal scroll will act as a vertical one.
Signed-off-by: Dmitry Petrov <dpetroff@gmail.com>
Message-Id: <20220108153947.171861-6-dpetroff@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-4-armbru@redhat.com>
Previously we enforced that all key events are using QKeyCodes
at time they are sent:
commit af07e5ff02
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Fri Sep 29 11:12:00 2017 +0100
ui: convert key events to QKeyCodes immediately
This commit forget to fix the code for the legacy 'sendkey'
command which still accepts key numbers from the user, which
then need converting to QKeyCodes
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171019142848.572-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently, the FOO_lookup[] generated for QAPI enum types are
terminated by a NULL sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, replace "have we reached the sentinel?"
predicates by "have we reached the FOO__MAX value?" predicates.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-12-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type(). But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:
| struct q_obj_ImageInfoSpecificQCow2_wrapper {
| ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
| ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
| ImageInfoSpecificKind type;
| union { /* union tag is @type */
| void *data;
|- ImageInfoSpecificQCow2 *qcow2;
|- ImageInfoSpecificVmdk *vmdk;
|+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
| } u;
| };
Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation). Using the implicit type
also lets us get rid of the simple_union_type() hack.
Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access. The generated
qapi-visit.c code is also affected by the layout change:
|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
| }
| switch (obj->type) {
| case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
| break;
| case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
| break;
| default:
| abort();
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
An upcoming patch will alter how simple unions, like InputEvent, are
laid out, which will impact all lines of the form 'evt->u.XXX'
(expanding it to the longer 'evt->u.XXX.data'). For better
legibility in that patch, and less need for line wrapping, it's better
to use a temporary variable to reduce the effect of a layout change to
just the variable initializations, rather than every reference within
an InputEvent.
There was one instance in hid.c:hid_pointer_event() where the code
was referring to evt->u.rel inside the case label where evt->u.abs
is the correct name; thankfully, both members of the union have the
same type, so it happened to work, but it is now cleaner.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-8-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
All lowercase, use-dash instead of CamelCase.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-2-git-send-email-peter.maydell@linaro.org
When processing 'sendkey' command, hmp_sendkey routine null
terminates the 'keyname_buf' array. This results in an OOB
write issue, if 'keyname_len' was to fall outside of
'keyname_buf' array.
Since the keyname's length is known the keyname_buf can be
removed altogether by adding a length parameter to
index_from_key() and using it for the error output as well.
Reported-by: Ling Liu <liuling-it@360.cn>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Message-Id: <20160113080958.GA18934@olga>
[Comparison with "<" dumbed down, test for junk after strtoul()
tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When munging enum values, the fact that we were passing the entire
prefix + value through camel_to_upper() meant that enum values
spelled with CamelCase could be turned into CAMEL_CASE. However,
this provides a potential collision (both OneTwo and One-Two would
munge into ONE_TWO) for enum types, when the same two names are
valid side-by-side as QAPI member names. By changing the generation
of enum constants to always be prefix + '_' + c_name(value,
False).upper(), and ensuring that there are no case collisions (in
the next patches), we no longer have to worry about names that
would be distinct as QAPI members but collide as variant tag names,
without having to think about what munging the heuristics in
camel_to_upper() will actually perform on an enum value.
Making the change will affect enums that did not follow coding
conventions, using 'CamelCase' rather than desired 'lower-case'.
Thankfully, there are only two culprits: InputButton and ErrorClass.
We already tweaked ErrorClass to make it an alias of QapiErrorClass,
where only the alias needs changing rather than the whole tree. So
the bulk of this change is modifying INPUT_BUTTON_WHEEL_UP to the
new INPUT_BUTTON_WHEELUP (and likewise for WHEELDOWN). That part
of this commit may later need reverting if we rename the enum
constants from 'WheelUp' to 'wheel-up' as part of moving
x-input-send-event to a stable interface; but at least we have
documentation bread crumbs in place to remind us (commit 513e7cd),
and it matches the fact that SDL constants are also spelled
SDL_BUTTON_WHEELUP.
Suggested by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-27-git-send-email-eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.
This patch was mostly generated by applying a temporary patch:
|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
| max_index = c_enum_const(name, 'MAX', prefix)
| ret += mcgen('''
| [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
| max_index=max_index)
then running:
$ cat qapi-{types,event}.c tests/test-qapi-types.c |
sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list
The only things not generated are the changes in scripts/qapi.py.
Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
Make the conversion to the new layout for input-related code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-20-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Remove qemu_console_displaystate(), qemu_remove_kbd_event_handler(),
qemu_different_endianness_pixelformat() and cpkey(), since they are
completely unused.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
commit 2e377f1730 changed the ordering
of the release events as side effect. Some guests are not happy with
that and don't recognise ctrl-alt-del any more. This patch restores
the old last-pressed first-released behavior.
Cc: Amos Kong <akong@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Restores traditional behavior: Keyboard input will be routed to the most
recently added keyboard. Without this all kbd input goes to the ps/2
keyboard, even if you add a usb keyboard to your guest.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This removes the last user of the lecagy input mouse handler list,
so we can remove more legacy bits with this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
legacy mouse event handlers are registered in the new core,
so they receive events submitted to the new input core.
legacy kbd_mouse_event() continues to use the old code paths.
So new-core event handlers wouldn't see events submitted via
kbd_mouse_event.
This leads to the constrain that we we must transition all
kbd_mouse_event() users first to keep things working. But
that is easier to handle than translating legacy mouse events
into new-core mouse events ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
legacy kbd event handlers are registered in the new core,
so they receive events from the new input core code.
keycode -> scancode translation needed here.
legacy kbd_put_keycode() sends events to the new core.
scancode -> keycode translation needed here.
So with this patch the new input core is fully functional
for keyboard events. New + legacy interfaces can be mixed
in any way.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
