cpu_cc_compute_all() has an argument that is always equal to CC_OP for historical
reasons (dating back to commit a7812ae412, "TCG variable type checking.", 2008-11-17,
which added the argument to helper_cc_compute_all). It does not make sense for the
argument to have any other value, so remove it and clean up some lines that are not
too long anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gen_lea_v_seg (called by gen_add_A0_ds_seg) already zeroes any
bits of s->A0 beyond s->aflag. It does so before summing the
segment base and, if not in 64-bit mode, also after summing it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
is_int is always 1, and error_code is always zero.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
OF is equal to the carry flag, so use the same CCPrepare.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take advantage of the fact that there can be no 1 bits between SF and OF.
If they were adjacent, you could sum SF and get a carry only if SF was
already set. Then the value of OF in the sum is the XOR of OF itself,
the carry (which is SF) and 0 (the value of the OF bit in the addend):
this is OF^SF exactly.
Because OF and SF are not adjacent, just place more 1 bits to the
left so that the carry propagates, which means summing CC_O - CC_S.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vCPU "reset" is only possible with system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20231212113640.30287-5-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In 32-bit mode, pc = eip + cs_base is also 32-bit, and must wrap.
Failure to do so results in incorrect memory exceptions to the guest.
Before 732d548732, this was implicitly done via truncation to
target_ulong but only in qemu-system-i386, not qemu-system-x86_64.
To fix this, we must add conditional zero-extensions.
Since we have to test for 32 vs 64-bit anyway, note that cs_base
is always zero in 64-bit mode.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2022
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20231212172510.103305-1-richard.henderson@linaro.org>
Commit 7191f24c7f ("accel/kvm/kvm-all: Handle register access errors")
added error checking for KVM_SET_SREGS/KVM_SET_SREGS2. In doing so, it
exposed a long-running bug in current KVM support for SEV-ES where the
kernel assumes that MSR_EFER_LMA will be set explicitly by the guest
kernel, in which case EFER write traps would result in KVM eventually
seeing MSR_EFER_LMA get set and recording it in such a way that it would
be subsequently visible when accessing it via KVM_GET_SREGS/etc.
However, guest kernels currently rely on MSR_EFER_LMA getting set
automatically when MSR_EFER_LME is set and paging is enabled via
CR0_PG_MASK. As a result, the EFER write traps don't actually expose the
MSR_EFER_LMA bit, even though it is set internally, and when QEMU
subsequently tries to pass this EFER value back to KVM via
KVM_SET_SREGS* it will fail various sanity checks and return -EINVAL,
which is now considered fatal due to the aforementioned QEMU commit.
This can be addressed by inferring the MSR_EFER_LMA bit being set when
paging is enabled and MSR_EFER_LME is set, and synthesizing it to ensure
the expected bits are all present in subsequent handling on the host
side.
Ultimately, this handling will be implemented in the host kernel, but to
avoid breaking QEMU's SEV-ES support when using older host kernels, the
same handling can be done in QEMU just after fetching the register
values via KVM_GET_SREGS*. Implement that here.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Lara Lazier <laramglazier@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: <kvm@vger.kernel.org>
Fixes: 7191f24c7f ("accel/kvm/kvm-all: Handle register access errors")
Signed-off-by: Michael Roth <michael.roth@amd.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231206155821.1194551-1-michael.roth@amd.com>
Improve
$ qemu-system-x86_64 -device max-x86_64-cpu,vendor=me
qemu-system-x86_64: -device max-x86_64-cpu,vendor=me: Property '.vendor' doesn't take value 'me'
to
qemu-system-x86_64: -device max-x86_64-cpu,vendor=0123456789abc: value of property 'vendor' must consist of exactly 12 characters
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031111059.3407803-8-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[Typo corrected]
In the nr_threads' comment, specify it represents the
number of threads in the "core" to avoid confusion.
Also add comment for nr_dies in CPUX86State.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231024090323.1859210-5-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
From CPUState.nr_cores' comment, it represents "number of cores within
this CPU package".
After 003f230e37 ("machine: Tweak the order of topology members in
struct CpuTopology"), the meaning of smp.cores changed to "the number of
cores in one die", but this commit missed to change CPUState.nr_cores'
calculation, so that CPUState.nr_cores became wrong and now it
misses to consider numbers of clusters and dies.
At present, only i386 is using CPUState.nr_cores.
But as for i386, which supports die level, the uses of CPUState.nr_cores
are very confusing:
Early uses are based on the meaning of "cores per package" (before die
is introduced into i386), and later uses are based on "cores per die"
(after die's introduction).
This difference is due to that commit a94e142899 ("target/i386: Add
CPUID.1F generation support for multi-dies PCMachine") misunderstood
that CPUState.nr_cores means "cores per die" when calculated
CPUID.1FH.01H:EBX. After that, the changes in i386 all followed this
wrong understanding.
With the influence of 003f230e37 and a94e142899, for i386 currently
the result of CPUState.nr_cores is "cores per die", thus the original
uses of CPUState.cores based on the meaning of "cores per package" are
wrong when multiple dies exist:
1. In cpu_x86_cpuid() of target/i386/cpu.c, CPUID.01H:EBX[bits 23:16] is
incorrect because it expects "cpus per package" but now the
result is "cpus per die".
2. In cpu_x86_cpuid() of target/i386/cpu.c, for all leaves of CPUID.04H:
EAX[bits 31:26] is incorrect because they expect "cpus per package"
but now the result is "cpus per die". The error not only impacts the
EAX calculation in cache_info_passthrough case, but also impacts other
cases of setting cache topology for Intel CPU according to cpu
topology (specifically, the incoming parameter "num_cores" expects
"cores per package" in encode_cache_cpuid4()).
3. In cpu_x86_cpuid() of target/i386/cpu.c, CPUID.0BH.01H:EBX[bits
15:00] is incorrect because the EBX of 0BH.01H (core level) expects
"cpus per package", which may be different with 1FH.01H (The reason
is 1FH can support more levels. For QEMU, 1FH also supports die,
1FH.01H:EBX[bits 15:00] expects "cpus per die").
4. In cpu_x86_cpuid() of target/i386/cpu.c, when CPUID.80000001H is
calculated, here "cpus per package" is expected to be checked, but in
fact, now it checks "cpus per die". Though "cpus per die" also works
for this code logic, this isn't consistent with AMD's APM.
5. In cpu_x86_cpuid() of target/i386/cpu.c, CPUID.80000008H:ECX expects
"cpus per package" but it obtains "cpus per die".
6. In simulate_rdmsr() of target/i386/hvf/x86_emu.c, in
kvm_rdmsr_core_thread_count() of target/i386/kvm/kvm.c, and in
helper_rdmsr() of target/i386/tcg/sysemu/misc_helper.c,
MSR_CORE_THREAD_COUNT expects "cpus per package" and "cores per
package", but in these functions, it obtains "cpus per die" and
"cores per die".
On the other hand, these uses are correct now (they are added in/after
a94e142899):
1. In cpu_x86_cpuid() of target/i386/cpu.c, topo_info.cores_per_die
meets the actual meaning of CPUState.nr_cores ("cores per die").
2. In cpu_x86_cpuid() of target/i386/cpu.c, vcpus_per_socket (in CPUID.
04H's calculation) considers number of dies, so it's correct.
3. In cpu_x86_cpuid() of target/i386/cpu.c, CPUID.1FH.01H:EBX[bits
15:00] needs "cpus per die" and it gets the correct result, and
CPUID.1FH.02H:EBX[bits 15:00] gets correct "cpus per package".
When CPUState.nr_cores is correctly changed to "cores per package" again
, the above errors will be fixed without extra work, but the "currently"
correct cases will go wrong and need special handling to pass correct
"cpus/cores per die" they want.
Fix CPUState.nr_cores' calculation to fit the original meaning "cores
per package", as well as changing calculation of topo_info.cores_per_die,
vcpus_per_socket and CPUID.1FH.
Fixes: a94e142899 ("target/i386: Add CPUID.1F generation support for multi-dies PCMachine")
Fixes: 003f230e37 ("machine: Tweak the order of topology members in struct CpuTopology")
Signed-off-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Co-developed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231024090323.1859210-4-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The OBJECT_DECLARE_CPU_TYPE() macro forward-declares each
ArchCPUClass type. These forward declarations are sufficient
for code in hw/ to use the QOM definitions. No need to expose
these structure definitions. Keep each local to their target/
by moving them to the corresponding "cpu.h" header.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231013140116.255-13-philmd@linaro.org>
While the default "info lapic" always synchronizes cpu state ...
mon_get_cpu()
-> mon_get_cpu_sync(mon, true)
-> cpu_synchronize_state(cpu)
-> ioctl KVM_GET_LAPIC (taking KVM as example)
... the cpu state is not synchronized when the apic-id is available as
argument.
The cpu state should be synchronized when apic-id is available. Otherwise
the "info lapic <apic-id>" always returns stale data.
Reference:
https://lore.kernel.org/all/20211028155457.967291-19-berrange@redhat.com/
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-ID: <20231030085336.2681386-1-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231026211938.162815-1-dongli.zhang@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230918160257.30127-4-philmd@linaro.org>
Follow the naming used by other files in target/i386/.
No functional changes.
Suggested-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231020111136.44401-4-philmd@linaro.org>
Follow the naming used by other files in target/i386/.
No functional changes.
Suggested-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231020111136.44401-3-philmd@linaro.org>
Follow C style guidelines and use CPUState forward
declaration from "qemu/typedefs.h".
No functional changes.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231020111136.44401-2-philmd@linaro.org>
When CPUArchState* is available (here CPUX86State*), we can
use the fast env_archcpu() macro to get ArchCPU* (here X86CPU*).
The QOM cast X86_CPU() macro will be slower when building with
--enable-qom-cast-debug.
Pass CPUX86State* as argument to simulate_rdmsr / simulate_wrmsr
instead of a CPUState* to avoid an extra cast.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Roman Bolshakov <roman@roolebo.dev>
Tested-by: Roman Bolshakov <roman@roolebo.dev>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231009110239.66778-7-philmd@linaro.org>
We already have 'x86_cpu = X86_CPU(cpu)'. Use the variable
instead of doing another QOM cast with X86_CPU().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Roman Bolshakov <roman@roolebo.dev>
Tested-by: Roman Bolshakov <roman@roolebo.dev>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231009110239.66778-6-philmd@linaro.org>
Hegerogeneous code needs access to the FOO_CPU_TYPE_NAME()
macro to resolve target CPU types. Move the declaration
(along with the required FOO_CPU_TYPE_SUFFIX) to "cpu-qom.h".
"target/foo/cpu-qom.h" is supposed to be target agnostic
(include-able by any target). Add such mention in the
header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231013140116.255-7-philmd@linaro.org>
Enforce the style described by commit 067109a11c ("docs/devel:
mention the spacing requirement for QOM"):
The first declaration of a storage or class structure should
always be the parent and leave a visual space between that
declaration and the new code. It is also useful to separate
backing for properties (options driven by the user) and internal
state to make navigation easier.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231013140116.255-2-philmd@linaro.org>
The primary console is special because the toolstack maps a page into
the guest for its ring, and also allocates the guest-side event channel.
The guest's grant table is even primed to export that page using a known
grant ref#. Add support for all that in emulated mode, so that we can
have a primary console.
For reasons unclear, the backends running under real Xen don't just use
a mapping of the well-known GNTTAB_RESERVED_CONSOLE grant ref (which
would also be in the ring-ref node in XenStore). Instead, the toolstack
sets the ring-ref node of the primary console to the GFN of the guest
page. The backend is expected to handle that special case and map it
with foreignmem operations instead.
We don't have an implementation of foreignmem ops for emulated Xen mode,
so just make it map GNTTAB_RESERVED_CONSOLE instead. This would probably
work for real Xen too, but we can't work out how to make real Xen create
a primary console of type "ioemu" to make QEMU drive it, so we can't
test that; might as well leave it as it is for now under Xen.
Now at last we can boot the Xen PV shim and run PV kernels in QEMU.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This will allow Linux guests (since v6.0) to use the per-vCPU upcall
vector delivered as MSI through the local APIC.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
A guest which has configured the per-vCPU upcall vector may set the
HVM_PARAM_CALLBACK_IRQ param to fairly much anything other than zero.
For example, Linux v6.0+ after commit b1c3497e604 ("x86/xen: Add support
for HVMOP_set_evtchn_upcall_vector") will just do this after setting the
vector:
/* Trick toolstack to think we are enlightened. */
if (!cpu)
rc = xen_set_callback_via(1);
That's explicitly setting the delivery to GSI#1, but it's supposed to be
overridden by the per-vCPU vector setting. This mostly works in Qemu
*except* for the logic to enable the in-kernel handling of event channels,
which falsely determines that the kernel cannot accelerate GSI delivery
in this case.
Add a kvm_xen_has_vcpu_callback_vector() to report whether vCPU#0 has
the vector set, and use that in xen_evtchn_set_callback_param() to
enable the kernel acceleration features even when the param *appears*
to be set to target a GSI.
Preserve the Xen behaviour that when HVM_PARAM_CALLBACK_IRQ is set to
*zero* the event channel delivery is disabled completely. (Which is
what that bizarre guest behaviour is working round in the first place.)
Cc: qemu-stable@nongnu.org
Fixes: 91cce75617 ("hw/xen: Add xen_evtchn device for event channel emulation")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The per-vCPU upcall vector support had three problems. Firstly it was
using the wrong hypercall argument and would always return -EFAULT when
the guest tried to set it up. Secondly it was using the wrong ioctl() to
pass the vector to the kernel and thus the *kernel* would always return
-EINVAL. Finally, even when delivering the event directly from userspace
with an MSI, it put the destination CPU ID into the wrong bits of the
MSI address.
Linux doesn't (yet) use this mode so it went without decent testing
for a while.
Cc: qemu-stable@nongnu.org
Fixes: 105b47fdf2 ("i386/xen: implement HVMOP_set_evtchn_upcall_vector")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This confuses lscpu into thinking it's running in PVH mode.
Cc: qemu-stable@nongnu.org
Fixes: bedcc13924 ("i386/xen: implement HYPERVISOR_xen_version")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This was introduced in KVM in Linux 2.6.33, we can require it
unconditionally. KVM_CLOCK_TSC_STABLE was only added in Linux 4.9,
for now do not require it (though it would allow the removal of some
pretty yucky code).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was introduced in KVM in Linux 2.6.36, and could already be used at
the time to save/restore FPU data even on older processor. We can require
it unconditionally and stop using KVM_GET/SET_FPU.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was introduced in KVM in Linux 3.5, we can require it unconditionally
in kvm_irqchip_send_msi(). However, not all architectures have to implement
it so check it only in x86, the only architecture that ever had MSI injection
but not KVM_CAP_SIGNAL_MSI.
ARM uses it to detect the presence of the ITS emulation in the kernel,
introduced in Linux 4.8. Assume that it's there and possibly fail when
realizing the arm-its-kvm device.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PAE mode in x86 supports 36 bit address space. Check the PAE CPUID on the
guest processor and set phys_bits to 36 if PAE feature is set. This is in
addition to checking the presence of PSE36 CPUID feature for setting 36 bit
phys_bits.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20230912120650.371781-1-anisinha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instructions in VEX exception class 6 generally look at the value of
VEX.W. Note that the manual places some instructions incorrectly in
class 4, for example VPERMQ which has no non-VEX encoding and no legacy
SSE analogue. AMD does a mess of its own, as documented in the comment
that this patch adds.
Most of them are checked for VEX.W=0, and are listed in the manual
(though with an omission) in table 2-16; VPERMQ and VPERMPD check for
VEX.W=1, which is only listed in the instruction description. Others,
such as VPSRLV, VPSLLV and the FMA3 instructions, use VEX.W to switch
between a 32-bit and 64-bit operation.
Fix more of the class 4/class 6 mismatches, and implement the check for
VEX.W in TCG.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for adding more similar checks, move the VEX.L=0 check
and several X86_SPECIAL_* checks to a new field, where each bit represent
a common check on unused bits, or a restriction on the processor mode.
Likewise, many SVM intercepts can be checked during the decoding phase,
the main exception being the selective CR0 write, MSR and IOIO intercepts.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation was validated with OpenSSL and with the test vectors in
https://github.com/rust-lang/stdarch/blob/master/crates/core_arch/src/x86/sha.rs.
The instructions provide a ~25% improvement on hashing a 64 MiB file:
runtime goes down from 1.8 seconds to 1.4 seconds; instruction count on
the host goes down from 5.8 billion to 4.8 billion with slightly better
IPC too. Good job Intel. ;)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Modify migrate_add_blocker and migrate_del_blocker to take an Error **
reason. This allows migration to own the Error object, so that if
an error occurs in migrate_add_blocker, migration code can free the Error
and clear the client handle, simplifying client code. It also simplifies
the migrate_del_blocker call site.
In addition, this is a pre-requisite for a proposed future patch that would
add a mode argument to migration requests to support live update, and
maintain a list of blockers for each mode. A blocker may apply to a single
mode or to multiple modes, and passing Error** will allow one Error object
to be registered for multiple modes.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1697634216-84215-1-git-send-email-steven.sistare@oracle.com>
When explicitly booting a multiple vcpus vm with "-cpu +ht", it gets
warning of
warning: host doesn't support requested feature: CPUID.01H:EDX.ht [bit 28]
Make CPUID_HT as supported unconditionally can resolve the warning.
However it introduces another issue that it also expose CPUID_HT to
guest when "-cpu host/max" with only 1 vcpu. To fix this, need mark
CPUID_HT as the no_autoenable_flags.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20231010060539.210258-1-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit a908985971 ("target/i386/seg_helper: introduce tss_set_busy",
2023-09-26) failed to use the tss_selector argument of the new function,
which was therefore unused.
This shows up as a #GP fault when booting old versions of 32-bit
Linux.
Fixes: a908985971 ("target/i386/seg_helper: introduce tss_set_busy", 2023-09-26)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20231011135350.438492-1-pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
All implementations of gdb_arch_name() returns dynamic duplicates of
static strings. It's also unlikely that there will be an implementation
of gdb_arch_name() that returns a truly dynamic value due to the nature
of the function returning a well-known identifiers. Qualify the value
gdb_arch_name() with const and make all of its implementations return
static strings.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230912224107.29669-8-akihiko.odaki@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-15-alex.bennee@linaro.org>
