In terms of scope, die-id should mean "the die number within
socket the CPU belongs to" instead of "the die number within
node/board the CPU belongs to". Fix it to avoid confusing
the Doc reader.
Fixes: 176d2cda0d ("i386/cpu: Consolidate die-id validity in smp context")
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20211122032651.16064-1-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Without the previous commit, this test triggers:
$ make check-qtest-x86_64
[...]
Running test qtest-x86_64/fuzz-lsi53c895a-test
qemu-system-x86_64: hw/scsi/lsi53c895a.c:624: lsi_do_dma: Assertion `s->current' failed.
ERROR qtest-x86_64/fuzz-lsi53c895a-test - too few tests run (expected 1, got 0)
Suggested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20211123111732.83137-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Hash64 MMU fix for FreeBSD installer
-----BEGIN PGP SIGNATURE-----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=4T/d
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20211129' of https://github.com/legoater/qemu into staging
ppc 6.2 queue:
* Hash64 MMU fix for FreeBSD installer
# gpg: Signature made Mon 29 Nov 2021 09:49:54 PM CET
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-ppc-20211129' of https://github.com/legoater/qemu:
target/ppc: fix Hash64 MMU update of PTE bit R
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When updating the R bit of a PTE, the Hash64 MMU was using a wrong byte
offset, causing the first byte of the adjacent PTE to be corrupted.
This caused a panic when booting FreeBSD, using the Hash MMU.
Fixes: a2dd4e83e7 ("ppc/hash64: Rework R and C bit updates")
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
- introduce CF_NOIRQ to avoid watchpoint race
- fix avocado plugin test
- fix linker issue with weird paths
- band-aid for gdbstub race
- updates for MAINTAINERS
- fix some compiler warning in example plugin
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmGk7sYACgkQ+9DbCVqe
KkSUYggAjvhB9t4xOP/gmwMvIlI60paN7KoooJbxaUSPj11YvQlAX9gPw6PTR4MV
dh0RpmhUyO/MYpX7jvEuCRr05s8ZEg5kiJ/7r748yxdMffWL12iX/Mz4aZvBcMIq
TFZ/vZcuOs2OchrFOqfO6oxyQHXZWAkWrjY/9l/bMmz3277OmC2808YJoRq3jIUT
D1b0HzPQ9orxVM0MlNlY8YGQZ8gcM8g4mNee1+AZkiAUJS1klFNbepGGz+BCj8Ka
Jd6n8RZKjvPZtSntZdneeMx3vY7L/VxqjxbT+INTANB0sTPvq4jddZOk78z8/gdE
FHCJ7k8FHzlZAcRMmkyHRlpbWET4SA==
=oJUJ
-----END PGP SIGNATURE-----
Merge tag 'pull-for-6.2-291121-1' of https://github.com/stsquad/qemu into staging
TCG, plugin and build fixes:
- introduce CF_NOIRQ to avoid watchpoint race
- fix avocado plugin test
- fix linker issue with weird paths
- band-aid for gdbstub race
- updates for MAINTAINERS
- fix some compiler warning in example plugin
# gpg: Signature made Mon 29 Nov 2021 04:16:22 PM CET
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
* tag 'pull-for-6.2-291121-1' of https://github.com/stsquad/qemu:
tests/plugin/syscall.c: fix compiler warnings
MAINTAINERS: Add section for Aarch64 GitLab custom runner
MAINTAINERS: Remove me as a reviewer for the build and test/avocado
gdbstub: handle a potentially racing TaskState
plugins/meson.build: fix linker issue with weird paths
tests/avocado: fix tcg_plugin mem access count test
accel/tcg: suppress IRQ check for special TBs
accel/tcg: introduce CF_NOIRQ
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix compiler warnings. The warnings can result in a broken build.
This patch fixes warnings such as:
In file included from /usr/include/glib-2.0/glib.h:111,
from ../tests/plugin/syscall.c:13:
../tests/plugin/syscall.c: In function ‘print_entry’:
/usr/include/glib-2.0/glib/glib-autocleanups.h:28:3: error: ‘out’ may be
used uninitialized in this function [-Werror=maybe-uninitialized]
g_free (*pp);
^~~~~~~~~~~~
../tests/plugin/syscall.c:82:23: note: ‘out’ was declared here
g_autofree gchar *out;
^~~
In file included from /usr/include/glib-2.0/glib.h:111,
from ../tests/plugin/syscall.c:13:
../tests/plugin/syscall.c: In function ‘vcpu_syscall_ret’:
/usr/include/glib-2.0/glib/glib-autocleanups.h:28:3: error: ‘out’ may be
used uninitialized in this function [-Werror=maybe-uninitialized]
g_free (*pp);
^~~~~~~~~~~~
../tests/plugin/syscall.c:73:27: note: ‘out’ was declared here
g_autofree gchar *out;
^~~
cc1: all warnings being treated as errors
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211128011551.2115468-1-juro.bystricky@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211129140932.4115115-9-alex.bennee@linaro.org>
Add a MAINTAINERS section to cover the GitLab YAML config file
containing the jobs run on the custom runner sponsored by the
Works On Arm project [*].
[*] https://developer.arm.com/solutions/infrastructure/works-on-arm
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211116163226.2719320-1-f4bug@amsat.org>
Message-Id: <20211129140932.4115115-8-alex.bennee@linaro.org>
Remove me as a reviewer for the Build and test automation and the
Integration Testing with the Avocado Framework and add Beraldo
Leal.
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-Id: <20211122191124.31620-1-willianr@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211129140932.4115115-7-alex.bennee@linaro.org>
When dealing with multi-threaded userspace programs there is a race
condition with the addition of cpu->opaque (aka TaskState). This is
due to cpu_copy calling cpu_create which updates the global vCPU list.
However the task state isn't set until later. This shouldn't be a
problem because the new thread can't have executed anything yet but
the gdbstub code does liberally iterate through the CPU list in
various places.
This sticking plaster ensure the not yet fully realized vCPU is given
an pid of -1 which should be enough to ensure it doesn't show up
anywhere else.
In the longer term I think the code that manages the association
between vCPUs and attached GDB processes could do with a clean-up and
re-factor.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/730
Message-Id: <20211129140932.4115115-6-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Stefan Weil <sw@weilnetz.de>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/712
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211129140932.4115115-5-alex.bennee@linaro.org>
When we cleaned up argument handling the test was missed.
Fixes: 5ae589faad ("tests/plugins/mem: introduce "track" arg and make args not positional")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211129140932.4115115-4-alex.bennee@linaro.org>
When we set cpu->cflags_next_tb it is because we want to carefully
control the execution of the next TB. Currently there is a race that
causes the second stage of watchpoint handling to get ignored if an
IRQ is processed before we finish executing the instruction that
triggers the watchpoint. Use the new CF_NOIRQ facility to avoid the
race.
We also suppress IRQs when handling precise self modifying code to
avoid unnecessary bouncing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/245
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211129140932.4115115-3-alex.bennee@linaro.org>
Here we introduce a new compiler flag to disable the checking of exit
request (icount_decr.u32). This is useful when we want to ensure the
next block cannot be preempted by an asynchronous event.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211129140932.4115115-2-alex.bennee@linaro.org>
Lots of small fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmGk2o4PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpAP0H/i47erp9gRr4XXUd71mhwVeIj7SOwGIJYvuf
YAHnFPu/Hvtl0zMQ3tHsUFV4ak7SeyJpqTIspTrhRF5WN9RB2drF+bVEUM+zVLiC
dNpstDu1E3Po3RBMLwVBQK0fheo+n680wmgiB5I4H9xTukszRmRm3evIjZQpMwZ+
Gx9WLW4ghG3fRJyXbZFDzOW2nlD/LUIQQ9ZZk9no3jULzbFS5hDFP1yxTOKZOGYk
JeITGHx+ODIIBla5KIUkH2yDYurHvKoOzpxo1qLr65EmVMuq4TT1DjaAM0SRg8YO
X+osx1AZRW7ZznYOUEiJuWru8QDM/BD0t91oR1kZAaEdaF3gYB8=
=w54r
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci,pc: bugfixes
Lots of small fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 29 Nov 2021 02:50:06 PM CET
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
Fix bad overflow check in hw/pci/pcie.c
intel-iommu: ignore leaf SNP bit in scalable mode
virtio-balloon: correct used length
virtio-balloon: process all in sgs for free_page_vq
vdpa: Add dummy receive callback
failover: fix unplug pending detection
virtio-mmio : fix the crash in the vm shutdown
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
LOOP_CONFIGURE is now used by losetup, and it cannot cope with ENOSYS.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvmtug4mbfx.fsf_-_@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Orginal qemu commit hash:14d02cfbe4adaeebe7cb833a8cc71191352cf03b
In function pcie_add_capability, an assert contains the
"offset < offset + size" expression.
Both variable offset and variable size are uint16_t,
the comparison is always true due to type promotion.
The next expression may be the same.
It might be like this:
Thread 1 "qemu-system-x86" hit Breakpoint 1, pcie_add_capability (
dev=0x555557ce5f10, cap_id=1, cap_ver=2 '\002', offset=256, size=72)
at ../hw/pci/pcie.c:930
930 {
(gdb) n
931 assert(offset >= PCI_CONFIG_SPACE_SIZE);
(gdb) n
932 assert(offset < offset + size);
(gdb) p offset
$1 = 256
(gdb) p offset < offset + size
$2 = 1
(gdb) set offset=65533
(gdb) p offset < offset + size
$3 = 1
(gdb) p offset < (uint16_t)(offset + size)
$4 = 0
Signed-off-by: Daniella Lee <daniellalee111@gmail.com>
Message-Id: <20211126061324.47331-1-daniellalee111@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When booting with scalable mode, I hit this error:
qemu-system-x86_64: vtd_iova_to_slpte: detected splte reserve non-zero iova=0xfffff002, level=0x1slpte=0x102681803)
qemu-system-x86_64: vtd_iommu_translate: detected translation failure (dev=01:00:00, iova=0xfffff002)
qemu-system-x86_64: New fault is not recorded due to compression of faults
This is because the SNP bit is set for second level page table since
Linux kernel commit 6c00612d0cba1 ("iommu/vt-d: Report right snoop
capability when using FL for IOVA") even if SC is not supported by the
hardware.
To unbreak the guest, ignore the leaf SNP bit for scalable mode
first. In the future we may consider to add SC support.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211129033618.3857-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Spec said:
"and len the total of bytes written into the buffer."
For inflateq, deflateq and statsq, we don't process in_sg so the used
length should be zero. For free_page_vq, tough the pages could be
changed by the device (in the destination), spec said:
"Note: len is particularly useful for drivers using untrusted buffers:
if a driver does not know exactly how much has been written by the
device, the driver would have to zero the buffer in advance to ensure
no data leakage occurs."
So 0 should be used as well here.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211129030841.3611-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
We only process the first in sg which may lead to the bitmap of the
pages belongs to following sgs were not cleared. This may result more
pages to be migrated. Fixing this by process all in sgs for
free_page_vq.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211129030841.3611-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* virt: Diagnose attempts to enable MTE or virt when using HVF accelerator
* GICv3 ITS: Allow clearing of ITS CTLR Enabled bit
* GICv3: Update cached state after LPI state changes
* GICv3: Fix handling of LPIs in list registers
-----BEGIN PGP SIGNATURE-----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=/KcE
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20211129' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* virt: Diagnose attempts to enable MTE or virt when using HVF accelerator
* GICv3 ITS: Allow clearing of ITS CTLR Enabled bit
* GICv3: Update cached state after LPI state changes
* GICv3: Fix handling of LPIs in list registers
# gpg: Signature made Mon 29 Nov 2021 11:34:46 AM CET
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20211129' of https://git.linaro.org/people/pmaydell/qemu-arm:
hw/intc/arm_gicv3: fix handling of LPIs in list registers
hw/intc/arm_gicv3: Add new gicv3_intid_is_special() function
hw/intc/arm_gicv3: Update cached state after LPI state changes
hw/intc: cannot clear GICv3 ITS CTLR[Enabled] bit
hw/arm/virt: Extend nested and mte checks to hvf
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is valid for an OS to put virtual interrupt ID values into the
list registers ICH_LR<n> which are greater than 1023. This
corresponds to (for example) KVM using the in-kernel emulated ITS to
give a (nested) guest an ITS. LPIs are delivered by the L1 kernel to
the L2 guest via the list registers in the same way as non-LPI
interrupts.
QEMU's code for handling writes to ICV_IARn (which happen when the L2
guest acknowledges an interrupt) and to ICV_EOIRn (which happen at
the end of the interrupt) did not consider LPIs, so it would
incorrectly treat interrupt IDs above 1023 as invalid. Fix this by
using the correct condition, which is gicv3_intid_is_special().
Note that the condition in icv_dir_write() is correct -- LPIs
are not valid there and so we want to ignore both "special" ID
values and LPIs.
(In the pseudocode this logic is in:
- VirtualReadIAR0(), VirtualReadIAR1(), which call IsSpecial()
- VirtualWriteEOIR0(), VirtualWriteEOIR1(), which call
VirtualIdentifierValid(data, TRUE) meaning "LPIs OK"
- VirtualWriteDIR(), which calls VirtualIdentifierValid(data, FALSE)
meaning "LPIs not OK")
This bug doesn't seem to have any visible effect on Linux L2 guests
most of the time, because the two bugs cancel each other out: we
neither mark the interrupt active nor deactivate it. However it does
mean that the L2 vCPU priority while the LPI handler is running will
not be correct, so the interrupt handler could be unexpectedly
interrupted by a different interrupt.
(NB: this has nothing to do with using QEMU's emulated ITS.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Qemu falls back on userland handlers even if vhost-user and vhost-vdpa
cases. These assumes a tap device can handle the packets.
If a vdpa device fail to start, it can trigger a sigsegv because of
that. Add dummy receiver that returns no progress so it can keep
running.
Fixes: 1e0a84ea49 ("vhost-vdpa: introduce vhost-vdpa net client")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211125101614.76927-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Failover needs to detect the end of the PCI unplug to start migration
after the VFIO card has been unplugged.
To do that, a flag is set in pcie_cap_slot_unplug_request_cb() and reset in
pcie_unplug_device().
But since
17858a1695 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35")
we have switched to ACPI unplug and these functions are not called anymore
and the flag not set. So failover migration is not able to detect if card
is really unplugged and acts as it's done as soon as it's started. So it
doesn't wait the end of the unplug to start the migration. We don't see any
problem when we test that because ACPI unplug is faster than PCIe native
hotplug and when the migration really starts the unplug operation is
already done.
See c000a9bd06 ("pci: mark device having guest unplug request pending")
a99c4da9fc ("pci: mark devices partially unplugged")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20211118133225.324937-4-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The root cause for this crash is the ioeventfd not stopped while the VM stop.
The callback for vmstate_change was not implement in virtio-mmio bus
Reproduce step
load the vm with
-M microvm \
-netdev tap,id=net0,vhostforce,script=no,downscript=no \
-device virtio-net-device,netdev=net0\
After the VM boot, login the vm and then shutdown the vm
System will crash
[Current thread is 1 (Thread 0x7ffff6edde00 (LWP 374378))]
(gdb) bt
0 0x00005555558f18b4 in qemu_flush_or_purge_queued_packets (purge=false, nc=0x55500252e850) at ../net/net.c:636
1 qemu_flush_queued_packets (nc=0x55500252e850) at ../net/net.c:656
2 0x0000555555b6c363 in virtio_queue_notify_vq (vq=0x7fffe7e2b010) at ../hw/virtio/virtio.c:2339
3 virtio_queue_host_notifier_read (n=0x7fffe7e2b08c) at ../hw/virtio/virtio.c:3583
4 0x0000555555de7b5a in aio_dispatch_handler (ctx=ctx@entry=0x5555567c5780, node=0x555556b83fd0) at ../util/aio-posix.c:329
5 0x0000555555de8454 in aio_dispatch_ready_handlers (ready_list=<optimized out>, ctx=<optimized out>) at ../util/aio-posix.c:359
6 aio_poll (ctx=0x5555567c5780, blocking=blocking@entry=false) at ../util/aio-posix.c:662
7 0x0000555555cce0cc in monitor_cleanup () at ../monitor/monitor.c:645
8 0x0000555555b06bd2 in qemu_cleanup () at ../softmmu/runstate.c:822
9 0x000055555586e693 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at ../softmmu/main.c:51
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211109023744.22387-1-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The GICv3/v4 pseudocode has a function IsSpecial() which returns true
if passed a "special" interrupt ID number (anything between 1020 and
1023 inclusive). We open-code this condition in a couple of places,
so abstract it out into a new function gicv3_intid_is_special().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The logic of gicv3_redist_update() is as follows:
* it must be called in any code path that changes the state of
(only) redistributor interrupts
* if it finds a redistributor interrupt that is (now) higher
priority than the previous highest-priority pending interrupt,
then this must be the new highest-priority pending interrupt
* if it does *not* find a better redistributor interrupt, then:
- if the previous state was "no interrupts pending" then
the new state is still "no interrupts pending"
- if the previous best interrupt was not a redistributor
interrupt then that remains the best interrupt
- if the previous best interrupt *was* a redistributor interrupt,
then the new best interrupt must be some non-redistributor
interrupt, but we don't know which so must do a full scan
In commit 17fb5e36aa we effectively added the LPI interrupts
as a kind of "redistributor interrupt" for this purpose, by adding
cs->hpplpi to the set of things that gicv3_redist_update() considers
before it gives up and decides to do a full scan of distributor
interrupts. However we didn't quite get this right:
* the condition check for "was the previous best interrupt a
redistributor interrupt" must be updated to include LPIs
in what it considers to be redistributor interrupts
* every code path which updates the LPI state which
gicv3_redist_update() checks must also call gicv3_redist_update():
this is cs->hpplpi and the GICR_CTLR ENABLE_LPIS bit
This commit fixes this by:
* correcting the test on cs->hppi.irq in gicv3_redist_update()
* making gicv3_redist_update_lpi() always call gicv3_redist_update()
* introducing a new gicv3_redist_update_lpi_only() for the one
callsite (the post-load hook) which must not call
gicv3_redist_update()
* making gicv3_redist_lpi_pending() always call gicv3_redist_update(),
either directly or via gicv3_redist_update_lpi()
* removing a couple of now-unnecessary calls to gicv3_redist_update()
from some callers of those two functions
* calling gicv3_redist_update() when the GICR_CTLR ENABLE_LPIS
bit is cleared
(This means that the not-file-local gicv3_redist_* LPI related
functions now all take care of the updates of internally cached
GICv3 information, in the same way the older functions
gicv3_redist_set_irq() and gicv3_redist_send_sgi() do.)
The visible effect of this bug was that when the guest acknowledged
an LPI by reading ICC_IAR1_EL1, we marked it as not pending in the
LPI data structure but still left it in cs->hppi so we would offer it
to the guest again. In particular for setups using an emulated GICv3
and ITS and using devices which use LPIs (ie PCI devices) a Linux
guest would complain "irq 54: nobody cared" and then hang. (The hang
was intermittent, presumably depending on the timing between
different interrupts arriving and being completed.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20211124202005.989935-1-peter.maydell@linaro.org
When Enabled bit is cleared in GITS_CTLR,ITS feature continues
to be enabled.This patch fixes the issue.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20211124182246.67691-1-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virt machine has properties to enable MTE and Nested Virtualization
support. However, its check to ensure the backing accel implementation
supports it today only looks for KVM and bails out if it finds it.
Extend the checks to HVF as well as it does not support either today.
This will cause QEMU to print a useful error message rather than
silently ignoring the attempt by the user to enable either MTE or
the Virtualization extensions.
Reported-by: saar amar <saaramar5@gmail.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-id: 20211123122859.22452-1-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Fix memory leak in vvfat when vvfat_open() fails
- iotest fixes for the gnutls crypto backend
-----BEGIN PGP SIGNATURE-----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=Cel9
-----END PGP SIGNATURE-----
Merge tag 'pull-block-2021-11-23' of https://gitlab.com/hreitz/qemu into staging
Block patches for 6.2-rc2:
- Fix memory leak in vvfat when vvfat_open() fails
- iotest fixes for the gnutls crypto backend
# gpg: Signature made Tue 23 Nov 2021 04:58:05 PM CET
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* tag 'pull-block-2021-11-23' of https://gitlab.com/hreitz/qemu:
iotests/149: Skip on unsupported ciphers
iotests: Use aes-128-cbc
block/vvfat.c fix leak when failure occurs
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Whenever qemu-img or qemu-io report that some cipher is unsupported,
skip the whole test, because that is probably because qemu has been
configured with the gnutls crypto backend.
We could taylor the algorithm list to what gnutls supports, but this is
a test that is run rather rarely anyway (because it requires
password-less sudo), and so it seems better and easier to skip it. When
this test is intentionally run to check LUKS compatibility, it seems
better not to limit the algorithms but keep the list extensive.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211117151707.52549-3-hreitz@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our gnutls crypto backend (which is the default as of 8bd0931f6)
supports neither twofish-128 nor the CTR mode. CBC and aes-128 are
supported by all of our backends (as far as I can tell), so use
aes-128-cbc in our iotests.
(We could also use e.g. aes-256-cbc, but the different key sizes would
lead to different key slot offsets and so change the reference output
more, which is why I went with aes-128.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211117151707.52549-2-hreitz@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Function vvfat_open called function enable_write_target and init_directories,
and these functions malloc new memory for BDRVVVFATState::qcow_filename,
BDRVVVFATState::used_clusters, and BDRVVVFATState::cluster_buff.
When the specified folder does not exist ,it may contains memory leak.
After init_directories function is executed, the vvfat_open return -EIO,
and bdrv_open_driver goto label open_failed,
the program use g_free(bs->opaque) to release BDRVVVFATState struct
without members mentioned.
command line:
qemu-system-x86_64 -hdb <vdisk qcow file> -usb -device usb-storage,drive=fat16
-drive file=fat:rw:fat-type=16:"<path of a host folder does not exist>",
id=fat16,format=raw,if=none
enable_write_target called:
(gdb) bt
at ../block/vvfat.c:3114
flags=155650, errp=0x7fffffffd780) at ../block/vvfat.c:1236
node_name=0x0, options=0x555556fa45d0, open_flags=155650,
errp=0x7fffffffd890) at ../block.c:1558
errp=0x7fffffffd890) at ../block.c:1852
reference=0x0, options=0x555556fa45d0, flags=40962, parent=0x555556f98cd0,
child_class=0x555556b1d6a0 <child_of_bds>, child_role=19,
errp=0x7fffffffda90) at ../block.c:3779
options=0x555556f9cfc0, bdref_key=0x555556239bb8 "file",
parent=0x555556f98cd0, child_class=0x555556b1d6a0 <child_of_bds>,
child_role=19, allow_none=true, errp=0x7fffffffda90) at ../block.c:3419
reference=0x0, options=0x555556f9cfc0, flags=8194, parent=0x0,
child_class=0x0, child_role=0, errp=0x555556c98c40 <error_fatal>)
at ../block.c:3726
options=0x555556f757b0, flags=0, errp=0x555556c98c40 <error_fatal>)
at ../block.c:3872
options=0x555556f757b0, flags=0, errp=0x555556c98c40 <error_fatal>)
at ../block/block-backend.c:436
bs_opts=0x555556f757b0, errp=0x555556c98c40 <error_fatal>)
at ../blockdev.c:608
errp=0x555556c98c40 <error_fatal>) at ../blockdev.c:992
......
Signed-off-by: Daniella Lee <daniellalee111@gmail.com>
Message-Id: <20211119112553.352222-1-daniellalee111@gmail.com>
[hreitz: Took commit message from v1]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Resolves pointer type issues with uc_mcontext.pc
on aarch64 between glibc and musl.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmGcqosdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV84JAgAjk5PmFv5ARYa6GD1
oXX+s5Z8YcBa/p7vflDQkZuStRFN8uddkp76LKhqZdaYmFQLFKvw/TIoHPrESvOW
083FSRxvOjJLvoV+X+Lb2LrzwlYhSmTVoL8oQY7dCuo/lSIZR23TEFcfkPmOb3Qd
Ill+7VpYY5YYwTEBWXB4DQKwuoZ2kBb9a9T1Dyo2fakCMghlv2ZYPC+8V/TiAdhT
pH8Cxcj5KOHG6CBd/0qrlGGYPaSiSxeCNZBRGj2TCwlZlW2UIBQ88ee4rqFhwfnh
QS5T+LJtcTAbL7D/8DRxi2ekdBRtVK0WXpwcurwizV4Kw7wzdepXp3Ls77IMk7PU
nLO/jg==
=J1Ha
-----END PGP SIGNATURE-----
Merge tag 'pull-lu-20211123' of https://gitlab.com/rth7680/qemu into staging
Create common rewind_if_in_safe_syscall function.
Resolves pointer type issues with uc_mcontext.pc
on aarch64 between glibc and musl.
# gpg: Signature made Tue 23 Nov 2021 09:47:07 AM CET
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-lu-20211123' of https://gitlab.com/rth7680/qemu:
linux-user/signal.c: Create a common rewind_if_in_safe_syscall
linux-user: Add host_signal_set_pc to set pc in mcontext
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A few more fixes to help eliminate race conditions from
device-crash-test, along with a fix that allows the SCM_RIGHTS
functionality to work on hosts that only have Python 3.6.
If this is too much this late in the RC process, I'd advocate for at
least patch 7/7 by itself.
-----BEGIN PGP SIGNATURE-----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=YtGD
-----END PGP SIGNATURE-----
Merge tag 'python-pull-request' of https://gitlab.com/jsnow/qemu into staging
Python testing fixes for 6.2
A few more fixes to help eliminate race conditions from
device-crash-test, along with a fix that allows the SCM_RIGHTS
functionality to work on hosts that only have Python 3.6.
If this is too much this late in the RC process, I'd advocate for at
least patch 7/7 by itself.
# gpg: Signature made Tue 23 Nov 2021 03:37:17 AM CET
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
* tag 'python-pull-request' of https://gitlab.com/jsnow/qemu:
python/aqmp: fix send_fd_scm for python 3.6.x
scripts/device-crash-test: Use a QMP timeout
python/machine: handle "fast" QEMU terminations
python/machine: move more variable initializations to _pre_launch
python/machine: add instance disambiguator to default nickname
python/machine: remove _remove_monitor_sockfile property
python/machine: add @sock_dir property
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All instances of rewind_if_in_safe_syscall are the same, differing only
in how the instruction point is fetched from the ucontext and the size
of the registers. Use host_signal_pc and new host_signal_set_pc
interfaces to fetch the pointer to the PC and adjust if needed. Delete
all the old copies of rewind_if_in_safe_syscall.
Acked-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211113045603.60391-3-imp@bsdimp.com>
[rth: include safe-syscall.h, simplify ifdefs]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a new function host_signal_set_pc to set the next pc in an
mcontext. The caller should ensure this is a valid PC for execution.
Acked-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211113045603.60391-2-imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* drop spurious bump of ITS vmstate version fields
-----BEGIN PGP SIGNATURE-----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=Hemo
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20211122-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* drop spurious bump of ITS vmstate version fields
# gpg: Signature made Mon 22 Nov 2021 07:43:19 PM CET
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20211122-1' of https://git.linaro.org/people/pmaydell/qemu-arm:
hw/intc/arm_gicv3_its: Revert version increments in vmstate_its
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
3.6 doesn't play keepaway with the socket object, so we don't need to go
fishing for it on this version. In fact, so long as 'sendmsg' is still
available, it's probably preferable to just use that method and only go
fishing for forbidden details when we absolutely have to.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20211118204620.1897674-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Despite all the previous fixes, it's still possible for
device-crash-test to wedge itself in the case that QEMU terminates *so
quickly* that it doesn't even begin a connection attempt to our QMP
client. Python will just joyfully wait ad infinitum for a connection
that will now never arrive.
The real fix is to use asyncio to simultaneously poll both the health of
the launched process AND the connection attempt. That's quite a bit more
invasive than just setting a connection timeout, though.
Do the very simplest thing for now.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20211118204620.1897674-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In the case that the QEMU process actually launches -- but then dies so
quickly that we can't establish a QMP connection to it -- QEMUMachine
currently calls _post_shutdown() assuming that it never launched the VM
process.
This isn't true, though: it "merely" may have failed to establish a QMP
connection and the process is in the middle of its own exit path.
If we don't wait for the subprocess, the caller may get a bogus `None`
return for .exitcode(). This behavior was observed from
device-crash-test; after the switch to Async QMP, the timings were
changed such that it was now seemingly possible to witness the failure
of "vm.launch()" *prior* to the exitcode becoming available.
The semantic of the `_launched` property is changed in this
patch. Instead of representing the condition "launch() executed
successfully", it will now represent "has forked a child process
successfully". This way, wait() when called in the exit path won't
become a no-op.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20211118204620.1897674-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
No need to clear them only to set them later.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20211118204620.1897674-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
If you create two instances of QEMUMachine(), they'll both create the
same nickname by default -- which is not that helpful.
Luckily, they'll both create unique temporary directories ... but due to
user configuration, they may share logging and sockfile directories,
meaning two instances can collide. The Python logging will also be quite
confusing, with no differentiation between the two instances.
Add an instance disambiguator (The memory address of the instance) to
the default nickname to foolproof this in all cases.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20211118204620.1897674-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It doesn't matter if it was the user or the class itself that specified
where the sockfile should be created; the fact is that if we are using a
sockfile here, we created it and we can clean it up.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20211118204620.1897674-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Analogous to temp_dir and log_dir, add a sock_dir property that defaults
to @temp_dir -- instead of base_temp_dir -- when the user hasn't
overridden the sock dir value in the initializer.
This gives us a much more unique directory to put sockfiles in by default.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20211118204620.1897674-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
-----BEGIN PGP SIGNATURE-----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=BBr1
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2021-11-22' of https://gitlab.com/thuth/qemu into staging
* Documentation updates
# gpg: Signature made Mon 22 Nov 2021 03:05:39 PM CET
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
* tag 'pull-request-2021-11-22' of https://gitlab.com/thuth/qemu:
docs: Render binary names as monospaced text
docs: Use double quotes instead of single quotes for COLO
docs: Drop deprecated 'props' from object-add
Fix some typos in documentation (found by codespell)
docs: List more commit-message tags in "submitting-a-patch"
docs: Fix botched rST conversion of 'submitting-a-patch.rst'
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 18f6290a6a ("hw/intc: GICv3 ITS initial framework")
incremented version_id and minimum_version_id fields of
VMStateDescription vmstate_its. This breaks the migration between
6.2 and 6.1 with the following message:
qemu-system-aarch64: savevm: unsupported version 1 for 'arm_gicv3_its' v0
qemu-system-aarch64: load of migration failed: Invalid argument
Revert that change.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20211122171020.1195483-1-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
