Some machines use floppy controllers via the SysBus interface,
and don't need to pull in all the ISA code.
Extract the ISA specific code to a new unit: fdc-isa.c, and
add a new Kconfig symbol: "FDC_ISA".
This allows us to remove the FIXME from commit dd0ff8191a
("isa: express SuperIO dependencies with Kconfig").
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-5-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Per the kconfig.rst:
A device should be listed [...] ``imply`` if (depending on
the QEMU command line) the board may or may not be started
without it.
This is the case with the NVDIMM device, so use the 'imply'
weak reverse dependency to select the symbol.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210511155354.3069141-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To ease the PCI device addition in next patches, split the code as follows:
- generic code (read/write/setup) is being kept in pvpanic.c
- ISA dependent code moved to pvpanic-isa.c
Also, rename:
- ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE.
- TYPE_PVPANIC -> TYPE_PVPANIC_ISA.
- MemoryRegion io -> mr.
- pvpanic_ioport_* in pvpanic_*.
Update the build system with the new files and config structure.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Uses the existing gpex device which is also used as pcie host bridge on
arm/aarch64. For now only a 32bit mmio window and no ioport support.
It is disabled by default, use "-machine microvm,pcie=on" to enable.
ACPI support must be enabled too because the bus is declared in the
DSDT table.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-6-kraxel@redhat.com
$subject says all. Can be controlled using -M microvm,acpi=on/off.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-9-kraxel@redhat.com
Let's wire it up similar to virtio-pmem. Also disallow unplug, so it's
harder for users to shoot themselves into the foot.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-16-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's separate the compilation of tpm_tis_common.c from
the compilation of tpm_tis_isa.c
The common part will be also compiled along with the
tpm_tis_sysbus device.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20200305165149.618-5-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
When configured with --without-default-devices, the build fails:
LINK x86_64-softmmu/qemu-system-x86_64
/usr/bin/ld: hw/i386/microvm.o: in function `microvm_devices_init':
hw/i386/microvm.c:157: undefined reference to `serial_hds_isa_init'
collect2: error: ld returned 1 exit status
make[1]: *** [Makefile:206: qemu-system-x86_64] Error 1
make: *** [Makefile:483: x86_64-softmmu/all] Error 2
While the MicroVM machine only uses the ISA serial port when the
MICROVM_MACHINE_ISA_SERIAL property is set, it has to be linked
with it. Replace the 'imply' Kconfig rule by a 'select'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191231183216.6781-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We moved all the PIIX3 southbridge code out of hw/pci-host/piix.c,
it now only contains i440FX northbridge code.
Rename it to match the chipset modelled.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Move all the PIIX3 functions to a new file: hw/isa/piix3.c.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
microvm is a machine type inspired by Firecracker and constructed
after its machine model.
It's a minimalist machine type without PCI nor ACPI support, designed
for short-lived guests. microvm also establishes a baseline for
benchmarking and optimizing both QEMU and guest operating systems,
since it is optimized for both boot time and footprint.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Pretty straightforward, just hook the current KCS and BT code into
the PCI system with the proper configuration.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: M: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
CONFIG_ACPI_PCI is a hard requirement of acpi-build.c, which is built
unconditionally for x86 target. Putting it in default-configs/ suggests
that it can be easily disabled, which isn't true.
Relocate the symbol with the other acpi-build.c requirements, under
'config PC'. This is similar to what is done for the arm 'virt' machine
type and CONFIG_ACPI_PCI
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-Id: <e73e6edff68fd30d69c6a1d02c9ef9192f773c63.1568049871.git.crobinso@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 97fd1ea8c1 broke the build for --without-default-devices as
VMMOUSE depends on VMPORT.
Fixes: 97fd1ea8c1
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
vmport device is not included when CONFIG_VMPORT is disabled, hence
QEMU fails with the following error:
`Unknown device 'vmport' for bus 'ISA': unknown.`
v2: imply VMPORT (Paolo Bonzini )
Signed-off-by: Julio Montes <julio.montes@intel.com>
Message-Id: <20190712160257.18270-1-julio.montes@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Override the device hotplug handler to properly handle the memory device
part via virtio-pmem-pci callbacks from the machine hotplug handler and
forward to the actual PCI bus hotplug handler.
As PCI hotplug has not been properly factored out into hotplug handlers,
most magic is performed in the (un)realize functions. Also some PCI host
buses don't have a PCI hotplug handler at all yet, just to be sure that
we alway have a hotplug handler on x86, add a simple error check.
Unlocking virtio-pmem will unlock virtio-pmem-pci.
Signed-off-by: David Hildenbrand <david@redhat.com>
[ Disable virtio-pmem hotunplug ]
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <20190619094907.10131-8-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some of our machines (like the ARM cubieboard) use CONFIG_AHCI for an AHCI
sysbus device, but do not use CONFIG_PCI since they do not feature a PCI
bus. With CONFIG_AHCI but without CONFIG_PCI, currently linking fails:
../hw/ide/ich.o: In function `pci_ich9_ahci_realize':
hw/ide/ich.c:124: undefined reference to `pci_allocate_irq'
hw/ide/ich.c:126: undefined reference to `pci_register_bar'
hw/ide/ich.c:128: undefined reference to `pci_register_bar'
hw/ide/ich.c:131: undefined reference to `pci_add_capability'
hw/ide/ich.c:147: undefined reference to `msi_init'
../hw/ide/ich.o: In function `pci_ich9_uninit':
hw/ide/ich.c:158: undefined reference to `msi_uninit'
../hw/ide/ich.o:(.data.rel+0x50): undefined reference to `vmstate_pci_device'
We must only compile ich.c if CONFIG_PCI is available, too, so introduce a
new config switch for this device.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When virtio-vga was added, the intention was to only support it for
those machines where the firmware does not know about virtio-gpu,
and supported VGA legacy hardware before virtio-{gpu,vga} were
introduced.
The Kconfig switch however enabled virtio-vga for all machines with
a PCI bus, and libvirt then prefers it even on hardware where
virtio-gpu would be preferrable. At least for now, only enable
virtio-vga for PC, hppa and pSeries machines, as was the case
before Kconfig dependencies were introduced.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes when configuring with CONFIG_PCI_DEVICES=n:
$ qemu-system-x86_64 -M q35
qemu-system-x86_64: Unsupported NIC model: e1000e
$ qemu-system-x86_64 -M pc
qemu-system-x86_64: Unsupported NIC model: e1000
Fixes: 7c28b925b7
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190316200818.8265-4-philmd@redhat.com>
CONFIG_I82374 is not needed for PC machines, since they create
i8257 directly instead.
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For the downstream distribution of QEMU, we want to compile without
CONFIG_PARALLEL. Commit 9157eee1b1 already moved the function
parallel_hds_isa_init() (which is still required for linking) into a file
that is included anyway, but commit bb3d5ea858 moved it
to a separate file which is only compiled again if CONFIG_PARALLEL is
set. To be able to link QEMU again without CONFIG_PARALLEL, the file
should be considered for linking for all targets that have CONFIG_ISA_BUS.
And while we're at it, add a proper comment in there with the rationale
for the separate file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1552297854-25847-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
%-softmmu.mak only keep boards definitions in Kconfig mode.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-43-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
remove default-configs/hyperv.mak and make dependencies
with Kconfig.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-41-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-38-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This way, the default-configs file only need to specify the boards
and any optional devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-37-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-36-yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.
The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig. One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script. This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Kconfig files were generated mostly with this script:
for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
shift
if test $# = 1; then
cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
bool
EOF
git add $(dirname $1)/Kconfig
else
echo $i $*
fi
done
sed -i '$d' hw/*/Kconfig
for i in hw/*; do
if test -d $i && ! test -f $i/Kconfig; then
touch $i/Kconfig
git add $i/Kconfig
fi
done
Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.
Kconfig.host and hw/Kconfig were created manually.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
