Due to a description loading failure, adding a trace log makes observing
the DMA behavior easy.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Loading a description from memory may cause a bus-error. In this
case, the DMA should stop working, set the error flag, and return
the failure value.
When calling the loading a description function, it should be noticed
that the function may return a failure value. Breaking the loop in this
case is one of the possible ways to handle it.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
* scsi-disk: migrate emulated requests
* i386/sev: fix Coverity issues
* i386/tcg: more conversions to new decoder
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZv6kMUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOn4Af/evnpsae1fm8may1NQmmezKiks/4X
cR0GaQ7w75Oas05jKsG7Xnrq3Vn6p5wllf3Wf00p7F1iJX18azY9rQgIsUVUgVem
/EIZk1eM6+mDxuIG0taPxc5Aw3cfIBWAjUmzsXrSr55e/wyiIxZCeUo2zk8Il+iL
Z4ceNzY5PZzc2Fl10D3cGs/+ynfiDM53ucwe3ve2T6NrxEVfKQPp5jkIUkBUba6z
zM5O4Q5KTEZYVth1gbDTB/uUJLUFjQ12kCQfRCNX+bEPDHwARr0UWr/Oxtz0jZSd
FvXohz7tI+v+ph0xHyE4tEFqryvLCII1td2ohTAYZZXNGkjK6XZildngBw==
=m4BE
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* i386: fix issue with cache topology passthrough
* scsi-disk: migrate emulated requests
* i386/sev: fix Coverity issues
* i386/tcg: more conversions to new decoder
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZv6kMUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOn4Af/evnpsae1fm8may1NQmmezKiks/4X
# cR0GaQ7w75Oas05jKsG7Xnrq3Vn6p5wllf3Wf00p7F1iJX18azY9rQgIsUVUgVem
# /EIZk1eM6+mDxuIG0taPxc5Aw3cfIBWAjUmzsXrSr55e/wyiIxZCeUo2zk8Il+iL
# Z4ceNzY5PZzc2Fl10D3cGs/+ynfiDM53ucwe3ve2T6NrxEVfKQPp5jkIUkBUba6z
# zM5O4Q5KTEZYVth1gbDTB/uUJLUFjQ12kCQfRCNX+bEPDHwARr0UWr/Oxtz0jZSd
# FvXohz7tI+v+ph0xHyE4tEFqryvLCII1td2ohTAYZZXNGkjK6XZildngBw==
# =m4BE
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 17 Jun 2024 12:48:19 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (25 commits)
target/i386: SEV: do not assume machine->cgs is SEV
target/i386: convert CMPXCHG to new decoder
target/i386: convert XADD to new decoder
target/i386: convert LZCNT/TZCNT/BSF/BSR/POPCNT to new decoder
target/i386: convert SHLD/SHRD to new decoder
target/i386: adapt gen_shift_count for SHLD/SHRD
target/i386: pull load/writeback out of gen_shiftd_rm_T1
target/i386: convert non-grouped, helper-based 2-byte opcodes
target/i386: split X86_CHECK_prot into PE and VM86 checks
target/i386: finish converting 0F AE to the new decoder
target/i386: fix bad sorting of entries in the 0F table
target/i386: replace read_crN helper with read_cr8
target/i386: convert MOV from/to CR and DR to new decoder
target/i386: fix processing of intercept 0 (read CR0)
target/i386: replace NoSeg special with NoLoadEA
target/i386: change X86_ENTRYwr to use T0, use it for moves
target/i386: change X86_ENTRYr to use T0
target/i386: put BLS* input in T1, use generic flag writeback
target/i386: rewrite flags writeback for ADCX/ADOX
target/i386: remove CPUX86State argument from generator functions
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Add AST2700 support
-----BEGIN PGP SIGNATURE-----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=TnR8
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20240617' of https://github.com/legoater/qemu into staging
aspeed queue:
* Add AST2700 support
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmZvtLUACgkQUaNDx8/7
# 7KH8Ew/+K7OJYUsRhuLByLjaQ8kCsVdxMCFLtpCL9t6AgrMUXaI6WkkynPMKITQQ
# AHocO76TsWRMp962obnjvXgVRCrtvOI2W5jvgp1Gr554tW7YQClLiGhuf1FeORS9
# ZQhWryoC8vK8ymC7dAS5cyuiddWFUGC04P9lb9oXr88n6goZ1xRfKwM+RttgfCAm
# 79SsK7g3TS8QOWH1kQwIQZyJKzwrw7bTM3Ijv9NmVKa050zWquMRZQeY18fgO6Ae
# p/pGpkf4Bc5iv+kIXoI4UN7Cx74aZoKInQ+DA71gtCWh/s09j9PkvOAfKWYAozD+
# VSaLvw4rvhRxgbs1SjoiMb5dDjJhngfzLhJX/P2FD1LCHRk+/uxk3fDDp2AqvQ6z
# IuWPb8FgWHqeiigcXkTW1JgUS85quIbjWBxreIrQiq+zR50EQy49elMRhzJlKsqZ
# 3/ulk7xf+5M1+wS4bo7r8LPk5K8mFw9b4cxfnx0feZCjrl4ZfeWyDtaKzCAU0MJq
# KfpHo9R98imjVmcRWUouTaFow33OXheLdPFO8PofVnT38a4KIWlkin3zFMdTOAk+
# f8kWMPlXlRpKBYsjvP2aCpoY6CY8bHskdBH7xysM2W1FfKTw3dwZRpt4dgVPxqYj
# KZXiKxzwnC2gGi/wn+EdhZwYy1nNSZYGK8s+jxBXi2UBrwv4PpA=
# =TnR8
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 16 Jun 2024 08:59:49 PM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240617' of https://github.com/legoater/qemu:
MAINTAINERS: Add reviewers for ASPEED BMCs
docs:aspeed: Add AST2700 Evaluation board
test/avocado/machine_aspeed.py: Add AST2700 test case
aspeed/soc: fix incorrect dram size for AST2700
aspeed: Add an AST2700 eval board
aspeed/soc: Add AST2700 support
aspeed/intc: Add AST2700 support
aspeed/scu: Add AST2700 support
aspeed/smc: Add AST2700 support
aspeed/smc: support different memory region ops for SMC flash region
aspeed/smc: support 64 bits dma dram address
aspeed/smc: support dma start length and 1 byte length unit
aspeed/smc: correct device description
aspeed/sdmc: Add AST2700 support
aspeed/sdmc: fix coding style
aspeed/sdmc: remove redundant macros
aspeed/sli: Add AST2700 support
aspeed/wdt: Add AST2700 support
aspeed/smc: Reintroduce "dram-base" property for AST2700
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since the kvm_dirty_ring_enabled function accesses a null kvm_state
pointer when the KVM acceleration parameter is not specified, running
calc_dirty_rate with the -r or -b option causes a segmentation fault.
Signed-off-by: Masato Imai <mii@sfc.wide.ad.jp>
Message-ID: <20240507025010.1968881-1-mii@sfc.wide.ad.jp>
[Assert kvm_state when kvm_dirty_ring_enabled was called to fix it. - Hyman]
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
There can be other confidential computing classes that are not derived
from sev-common. Avoid aborting when encountering them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the same flag generation code as SHL and SHR, but use
the existing gen_shiftd_rm_T1 function to compute the result
as well as CC_SRC.
Decoding-wise, SHLD/SHRD by immediate count as a 4 operand
instruction because s->T0 and s->T1 actually occupy three op
slots. The infrastructure used by opcodes in the 0F 3A table
works fine.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SHLD/SHRD can have 3 register operands - s->T0, s->T1 and either
1 or CL - and therefore decode->op[2] is taken by the low part
of the register being shifted. Pass X86_OP_* to gen_shift_count
from its current callers and hardcode cpu_regs[R_ECX] as the
shift count.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use gen_ld_modrm/gen_st_modrm, moving them and gen_shift_flags to the
caller. This way, gen_shiftd_rm_T1 becomes something that the new
decoder can call.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These have very simple generators and no need for complex group
decoding. Apart from LAR/LSL which are simplified to use
gen_op_deposit_reg_v and movcond, the code is generally lifted
from translate.c into the generators.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SYSENTER is allowed in VM86 mode, but not in real mode. Split the check
so that PE and !VM86 are covered by separate bits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is already partly implemented due to VLDMXCSR and VSTMXCSR; finish
the job.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All other control registers are stored plainly in CPUX86State.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add ASPEED members "Steven Lee", "Troy Lee" and "Jamin Lin"
to be reviewers of ASPEED BMCs.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add AST2700 Evaluation board and its boot command.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Add a test case to test Aspeed OpenBMC SDK v09.01 on AST2700 board.
It loads u-boot-nodtb.bin, u-boot.dtb, tfa and optee-os
images to dram first which base address is 0x400000000.
Then, boot and launch 4 cpu cores.
```
qemu-system-aarch64 -machine ast2700-evb
-device loader,force-raw=on,addr=0x400000000,file=workdir/u-boot-nodtb.bin \
-device loader,force-raw=on,addr=uboot_dtb_load_addr,file=workdir/u-boot.dtb\
-device loader,force-raw=on,addr=0x430000000,file=workdir/bl31.bin\
-device loader,force-raw=on,addr=0x430080000,file=workdir/optee/tee-raw.bin\
-device loader,cpu-num=0,addr=0x430000000 \
-device loader,cpu-num=1,addr=0x430000000 \
-device loader,cpu-num=2,addr=0x430000000 \
-device loader,cpu-num=3,addr=0x430000000 \
-smp 4 \
-drive file=workdir/image-bmc,format=raw,if=mtd
```
A test image is downloaded from the ASPEED Forked OpenBMC GitHub release repository :
https://github.com/AspeedTech-BMC/openbmc/releases/
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
AST2700 dram size calculation is not back compatible AST2600.
According to the DDR capacity hardware behavior,
if users write the data to the address which is beyond the ram size,
it would write the data to the "address % ram_size".
For example:
a. sdram base address "0x4 00000000"
b. sdram size 1 GiB
The available address range is from "0x4 00000000" to "0x4 3FFFFFFF".
If users write 0x12345678 to address "0x5 00000000",
the value of DRAM address 0 (base address 0x4 00000000) will be 0x12345678.
Add aspeed_soc_ast2700_dram_init to calculate the dram size and add
memory I/O whose address range is from "max_ram_size - ram_size" to max_ram_size
and its read/write handler to emulate DDR capacity hardware behavior.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
AST2700 CPU is ARM Cortex-A35 which is 64 bits.
Add TARGET_AARCH64 to build this machine.
According to the design of ast2700, it has a bootmcu(riscv-32) which
is used for executing SPL.
Then, CPUs(cortex-a35) execute u-boot, kernel and rofs.
Currently, qemu not support emulate two CPU architectures
at the same machine. Therefore, qemu will only support
to emulate CPU(cortex-a35) side for ast2700
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Initial definitions for a simple machine using an AST2700 SOC (Cortex-a35 CPU).
AST2700 SOC and its interrupt controller are too complex to handle
in the common Aspeed SoC framework. We introduce a new ast2700
class with instance_init and realize handlers.
AST2700 is a 64 bits quad core cpus and support 8 watchdog.
Update maximum ASPEED_CPUS_NUM to 4 and ASPEED_WDTS_NUM to 8.
In addition, update AspeedSocState to support scuio, sli, sliio and intc.
Add TYPE_ASPEED27X0_SOC machine type.
The SDMC controller is unlocked at SPL stage.
At present, only supports to emulate booting
start from u-boot stage. Set SDMC controller
unlocked by default.
In INTC, each interrupt of INT 128 to INT 136 combines 32 interrupts.
It connect GICINT IRQ GPIO-OUTPUT pins to GIC device with irq 128 to 136.
And, if a device irq is 128 to 136, its irq GPIO-OUTPUT pin is connected to
GICINT or-gates instead of GIC device.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
AST2700 interrupt controller(INTC) provides hardware interrupt interfaces
to interrupt of processors PSP, SSP and TSP. In INTC, each interrupt of
INT 128 to INT136 combines 32 interrupts.
Introduce a new aspeed_intc class with instance_init and realize handlers.
So far, this model only supports GICINT128 to GICINT136.
It creates 9 GICINT or-gates to connect 32 interrupts sources
from GICINT128 to GICINT136 as IRQ GPIO-OUTPUT pins.
Then, this model registers IRQ handler with its IRQ GPIO-INPUT pins which
connect to GICINT or-gates. And creates 9 GICINT IRQ GPIO-OUTPUT pins which
connect to GIC device with GIC IRQ 128 to 136.
If one interrupt source from GICINT128 to GICINT136
set irq, the OR-GATE irq callback function is called and set irq to INTC by
OR-GATE GPIO-OUTPUT pins. Then, the INTC irq callback function is called and
set irq to GIC by its GICINT IRQ GPIO-OUTPUT pins. Finally, the GIC irq
callback function is called and set irq to CPUs and
CPUs execute Interrupt Service Routine (ISR).
Block diagram of GICINT132:
GICINT132
ETH1 +-----------+
+-------->+0 3|
ETH2 | 4|
+-------->+1 5|
ETH3 | 6|
+-------->+2 19| INTC GIC
UART0 | 20| +--------------------------+
+-------->+7 21| | | +--------------+
UART1 | 22| |orgate0 +----> output_pin0+----------->+GIC128 |
+-------->+8 23| | | | |
UART2 | 24| |orgate1 +----> output_pin1+----------->+GIC129 |
+-------->+9 25| | | | |
UART3 | 26| |orgate2 +----> output_pin2+----------->+GIC130 |
+--------->10 27| | | | |
UART5 | 28| |orgate3 +----> output_pin3+----------->+GIC131 |
+-------->+11 29| | | | |
UART6 | +----------->+orgate4 +----> output_pin4+----------->+GIC132 |
+-------->+12 30| | | | |
UART7 | 31| |orgate5 +----> output_pin5+----------->+GIC133 |
+-------->+13 | | | | |
UART8 | OR[0:31] | |orgate6 +----> output_pin6+----------->+GIC134 |
---------->14 | | | | |
UART9 | | |orgate7 +----> output_pin7+----------->+GIC135 |
--------->+15 | | | | |
UART10 | | |orgate8 +----> output_pin8+----------->+GIC136 |
--------->+16 | | | +--------------+
UART11 | | +--------------------------+
+-------->+17 |
UART12 | |
+--------->18 |
| |
| |
| |
+-----------+
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[clg: Fixed class_size in TYPE_ASPEED_INTC definition ]
AST2700 have two SCU controllers which are SCU and SCUIO.
Both SCU and SCUIO registers are not compatible previous SOCs
, introduces new registers and adds ast2700 scu, sucio class init handler.
The pclk divider selection of SCUIO is defined in SCUIO280[20:18] and
the pclk divider selection of SCU is defined in SCU280[25:23].
Both of them are not compatible AST2600 SOCs, adds a get_apb_freq function
and trace-event for AST2700 SCU and SCUIO.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[clg: Fixed spelling : Unhandeled -> Unhandled ]
AST2700 fmc/spi controller's address decoding unit is 64KB
and only bits [31:16] are used for decoding. Introduce seg_to_reg
and reg_to_seg handlers for ast2700 fmc/spi controller.
In addition, adds ast2700 fmc, spi0, spi1, and spi2 class init handler.
AST2700 is a 64 bits quad core CPUs(Cortex-a35). Introduce a new
"aspeed_2700_smc_flash_ops" and set its valid "max_access_size"
8 for 64 bits data format access.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
It set "aspeed_smc_flash_ops" struct which containing
read and write callbacks to be used when I/O is performed
on the SMC flash region. And it set the valid max_access_size 4
by default for all ASPEED SMC models.
However, the valid max_access_size 4 only support 32 bits CPUs.
To support all ASPEED SMC model, introduce a new
"const MemoryRegionOps *" attribute in AspeedSMCClass and
use it in aspeed_smc_flash_realize function.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
AST2700 support the maximum dram size is 8GiB
and has a "DMA DRAM Side Address High Part(0x7C)"
register to support 64 bits dma dram address.
Add helper routines functions to compute the dma dram
address, new features and update trace-event
to support 64 bits dram address.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
DMA length is from 1 byte to 32MB for AST2600 and AST10x0
and DMA length is from 4 bytes to 32MB for AST2500.
In other words, if "R_DMA_LEN" is 0, it should move at least 1 byte
data for AST2600 and AST10x0 and 4 bytes data for AST2500.
To support all ASPEED SOCs, adds dma_start_length parameter to store
the start length, add helper routines function to compute the dma length
and update DMA_LENGTH mask to "1FFFFFF" to support dma 1 byte
length unit for AST2600 and AST1030.
Currently, only supports dma length 4 bytes aligned.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The SDRAM memory controller(DRAMC) controls the access to external
DDR4 and DDR5 SDRAM and power up to DDR4 and DDR5 PHY.
The DRAM memory controller of AST2700 is not backward compatible
to previous chips such AST2600, AST2500 and AST2400.
Max memory is now 8GiB on the AST2700. Introduce new
aspeed_2700_sdmc and class with read/write operation and
reset handlers.
Define DRAMC necessary protected registers and
unprotected registers for AST2700 and increase
the register set to 0x1000.
Add unlocked property to change controller protected status.
Incrementing the version of vmstate to 2.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Fix coding style issues from checkpatch.pl
Test command:
scripts/checkpatch.pl --no-tree -f hw/misc/aspeed_sdmc.c
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
These macros are no longer used for ASPEED SOCs, so removes them.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
AST2700 SLI engine is designed to accelerate the
throughput between cross-die connections.
It have CPU_SLI at CPU die and IO_SLI at IO die.
Introduce dummy AST2700 SLI and SLIIO models.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
AST2700 wdt controller is similiar to AST2600's wdt, but
the AST2700 has 8 watchdogs, and they each have 0x80 of registers.
Introduce ast2700 object class and increase the number of regs(offset) of
ast2700 model.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The Aspeed SMC device model use to have a 'sdram_base' property. It
was removed by commit d177892d4a ("aspeed/smc: Remove unused
"sdram-base" property") because previous changes simplified the DMA
transaction model to use an offset in RAM and not the physical
address.
The AST2700 SoC has larger address space (64-bit) and a new register
DMA DRAM Side Address High Part (0x7C) is introduced to deal with the
high bits of the DMA address. To be able to compute the offset of the
DMA transaction, as done on the other SoCs, we will need to know where
the DRAM is mapped in the address space. Re-introduce a "dram-base"
property to hold this value.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Send raw packets over if UADK hardware support is not available. This is to
satisfy Qemu qtest CI which may run on platforms that don't have UADK
hardware support. Subsequent patch will add support for uadk migration
qtest.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Initialize UADK session and allocate buffers required. The actual
compression/decompression will only be done in a subsequent patch.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add --enable-uadk and --disable-uadk options to enable and disable
UADK compression accelerator. This is for using UADK based hardware
accelerators for live migration.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Document UADK(User Space Accelerator Development Kit) library details
and how to use that for migration.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Zhangfei Gao <zhangfei.gao@linaro.org>
[s/Qemu/QEMU in docs]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
add qpl to compression method test for multifd migration
the qpl compression supports software path and hardware
path(IAA device), and the hardware path is used first by
default. If the hardware path is unavailable, it will
automatically fallback to the software path for testing.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
QPL compression and decompression will use IAA hardware path if the IAA
hardware is available. Otherwise the QPL library software path is used.
The hardware path will automatically fall back to QPL software path if
the IAA queues are busy. In some scenarios, this may happen frequently,
such as configuring 4 channels but only one IAA device is available. In
the case of insufficient IAA hardware resources, retry and fallback can
help optimize performance:
1. Retry + SW fallback:
total time: 14649 ms
downtime: 25 ms
throughput: 17666.57 mbps
pages-per-second: 1509647
2. No fallback, always wait for work queues to become available
total time: 18381 ms
downtime: 25 ms
throughput: 13698.65 mbps
pages-per-second: 859607
If both the hardware and software paths fail, the uncompressed page is
sent directly.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
during initialization, a software job is allocated to each channel
for software path fallabck when the IAA hardware is unavailable or
the hardware job submission fails. If the IAA hardware is available,
multiple hardware jobs are allocated for batch processing.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
