When using --disable-virglrenderer, QEMU still creates
hw-display-virtio-gpu-gl.so
hw-display-virtio-vga-gl.so
hw-display-virtio-gpu-pci-gl.so
but when these are loaded, they provide no functionality as the code
which registers types is not compiled in. Funtionally this is
relatively harmless, because QEMU is fine loading a module with no
types.
This is rather confusing for users and OS distro maintainers though,
as they think they have the GL functionality built, but in fact the
module they are looking at provides nothing of value.
The root cause is the use of 'when/if_true' rules when adding sources
to the module source set. If all the rules evaluate to false, then we
have declared the module, but not added anything to it. We need to
put declaration of the entire module inside a condition based on
existance of the 3rd party library deps that are mandatory.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1352
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221219125830.2369169-1-berrange@redhat.com>
[Do not check for pixman. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.
Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.
This also enables the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To support configure interrupt for vhost-vdpa
Introduce VIRTIO_CONFIG_IRQ_IDX -1 as configure interrupt's queue index,
Then we can reuse the functions guest_notifier_mask and guest_notifier_pending.
Add the check of queue index in these drivers, if the driver does not support
configure interrupt, the function will just return
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221222070451.936503-2-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert the TYPE_VIRTIO_VGA_BASE class to 3-phase reset, so we
don't need to use device_class_set_parent_reset() any more.
Note that this is an abstract class itself; none of the subclasses
override its reset method.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-3-peter.maydell@linaro.org
It seems a little bit weird that the para-virtualized x86 VMWare
devices "vmware-svga" and "vmxnet3" also show up in non-x86 targets.
They are likely pretty useless there (since the guest OSes likely
do not have any drivers for those enabled), so let's change this and
only enable those devices by default for the classical x86 targets.
Message-Id: <20221213095144.42355-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-6-philmd@linaro.org>
Have qxl_get_check_slot_offset() return false if the requested
buffer size does not fit within the slot memory region.
Similarly qxl_phys2virt() now returns NULL in such case, and
qxl_dirty_one_surface() aborts.
This avoids buffer overrun in the host pointer returned by
memory_region_get_ram_ptr().
Fixes: CVE-2022-4144 (out-of-bounds read)
Reported-by: Wenxu Yin (@awxylitol)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1336
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-5-philmd@linaro.org>
Currently qxl_phys2virt() doesn't check for buffer overrun.
In order to do so in the next commit, pass the buffer size
as argument.
For QXLCursor in qxl_render_cursor() -> qxl_cursor() we
verify the size of the chunked data ahead, checking we can
access 'sizeof(QXLCursor) + chunk->data_size' bytes.
Since in the SPICE_CURSOR_TYPE_MONO case the cursor is
assumed to fit in one chunk, no change are required.
In SPICE_CURSOR_TYPE_ALPHA the ahead read is handled in
qxl_unpack_chunks().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-4-philmd@linaro.org>
Only 3 command types are logged: no need to call qxl_phys2virt()
for the other types. Using different cases will help to pass
different structure sizes to qxl_phys2virt() in a pair of commits.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-2-philmd@linaro.org>
acpi-vga-stub.c pulls in vga_int.h
However that currently pulls in ui/console.h which
breaks e.g. on systems without pixman.
It's better to remove ui/console.h from vga_int.h
and directly include it where it's used.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221109222112.74519-1-mst@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Reported-by: Frederic Bezies <fredbezies@gmail.com>
Reported-by: Laurent Vivier <lvivier@redhat.com>
Fixes: cfead31326 ("AcpiDevAmlIf interface to build VGA device descs")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The TABs should be replaced with spaces, to make sure that we have a
consistent coding style with an indentation of 4 spaces everywhere.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370
Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com>
Message-Id: <5cefd05b4d3721d416e48e6df19df18cb6338933.1666707782.git.amarjargal16@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
NB:
We do not expect any functional change in any ACPI tables with this
change. It's only a refactoring.
NB2:
Some targets (or1k) do not support acpi and CONFIG_ACPI is off for them.
However, modules are reused between all architectures so CONFIG_ACPI is
on. For those architectures, dummy stub function definitions help to
resolve symbols. This change uses more of these and so it adds a couple
of dummy stub definitions so that symbols for those can be resolved.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
CC: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221107152744.868434-1-ani@anisinha.ca>
These memory allocation functions return void *, and casting to
another pointer type is useless clutter. Drop these casts.
If you really want another pointer type, consider g_new().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220923120025.448759-3-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
As the close-on-exec flags is not set on the file descriptors returned
by socketpair() at default, the fds will survive across exec' function.
In the case that exec' function get invoked, such as the live-update feature
which is been developing, it will cause fd leaks.
To address this problem, we should call qemu_socketpair() to create an pair of
connected sockets with the close-on-exec flag set.
Signed-off-by: Guoyi Tu <tugy@chinatelecom.cn>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <7002b12a5fb0a30cd878e14e07da61c36da72913.1661240709.git.tugy@chinatelecom.cn>
The scanout is currently updated only if the whole rect is inside the
scanout space. This is not a correct condition because the scanout should
be updated even a small area in the scanout space is covered by the rect.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220909014052.7297-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When building QEMU with DEBUG_ATI defined then running with
'-device ati-vga,romfile="" -d unimp,guest_errors -trace ati\*'
we get:
ati_mm_write 4 0x16c0 DP_CNTL <- 0x1
ati_mm_write 4 0x146c DP_GUI_MASTER_CNTL <- 0x2
ati_mm_write 4 0x16c8 DP_MIX <- 0xff0000
ati_mm_write 4 0x16c4 DP_DATATYPE <- 0x2
ati_mm_write 4 0x224 CRTC_OFFSET <- 0x0
ati_mm_write 4 0x142c DST_PITCH_OFFSET <- 0xfe00000
ati_mm_write 4 0x1420 DST_Y <- 0x3fff
ati_mm_write 4 0x1410 DST_HEIGHT <- 0x3fff
ati_mm_write 4 0x1588 DST_WIDTH_X <- 0x3fff3fff
ati_2d_blt: vram:0x7fff5fa00000 addr:0 ds:0x7fff61273800 stride:2560 bpp:32 rop:0xff
ati_2d_blt: 0 0 0, 0 127 0, (0,0) -> (16383,16383) 16383x16383 > ^
ati_2d_blt: pixman_fill(dst:0x7fff5fa00000, stride:254, bpp:8, x:16383, y:16383, w:16383, h:16383, xor:0xff000000)
Thread 3 "qemu-system-i38" received signal SIGSEGV, Segmentation fault.
(gdb) bt
#0 0x00007ffff7f62ce0 in sse2_fill.lto_priv () at /lib64/libpixman-1.so.0
#1 0x00007ffff7f09278 in pixman_fill () at /lib64/libpixman-1.so.0
#2 0x0000555557b5a9af in ati_2d_blt (s=0x631000028800) at hw/display/ati_2d.c:196
#3 0x0000555557b4b5a2 in ati_mm_write (opaque=0x631000028800, addr=5512, data=1073692671, size=4) at hw/display/ati.c:843
#4 0x0000555558b90ec4 in memory_region_write_accessor (mr=0x631000039cc0, addr=5512, ..., size=4, ...) at softmmu/memory.c:492
Commit 584acf34cb ("ati-vga: Fix reverse bit blts") introduced
the local dst_x and dst_y which adjust the (x, y) coordinates
depending on the direction in the SRCCOPY ROP3 operation, but
forgot to address the same issue for the PATCOPY, BLACKNESS and
WHITENESS operations, which also call pixman_fill().
Fix that now by using the adjusted coordinates in the pixman_fill
call, and update the related debug printf().
Reported-by: Qiang Liu <qiangliu@zju.edu.cn>
Fixes: 584acf34cb ("ati-vga: Fix reverse bit blts")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Mauro Matteo Cascella <mcascell@redhat.com>
Message-Id: <20210906153103.1661195-1-philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In xlnx_dp_aux_set_command, when the command leads to the default
branch, xlxn-dp will abort and then crash.
This patch removes this abort and drops this operation.
Fixes: 58ac482 ("introduce xlnx-dp")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/411
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Qiang Liu <cyruscyliu@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Frederic Konrad <fkonrad@amd.com>
Message-Id: <20220808080116.2184881-1-cyruscyliu@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When in CGA modes, QEMU wants to ignore the maximum scan field (bits 0..4) of
the maximum scan length register in the CRTC. It is not clear why this is
needed---for example, Bochs ignores bit 7 instead. The issue is that the
CGA modes are not detected correctly, and in particular mode 6 results in
multi_scan==3 according to how SeaBIOS programs it. The right way to check
for CGA graphics modes is to check whether bit 13 of the address is special
cased by the CRT controller to achieve line interleaving, i.e. whether bit 0
of the CRTC mode control register is clear.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1020
Reported-by: Korneliusz Osmenda <korneliuszo@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes the dedicated framebuffer mailbox interface by
removing an unneeded offset. This means that we pick the framebuffer
address in the same way that we do if the guest code uses the buffer
allocate mechanism of the bcm2835_property interface (case
0x00040001: /* Allocate buffer */ in bcm2835_property.c).
The documentation of this mailbox interface doesn't say anything
about using parts of the request buffer address to affect the
chosen framebuffer address:
https://github.com/raspberrypi/firmware/wiki/Mailbox-framebuffer-interface
Some baremetal applications like the Screen01/Screen02 examples from
Baking Pi tutorial[1] didn't work before this patch.
[1] https://www.cl.cam.ac.uk/projects/raspberrypi/tutorials/os/screen01.html
Signed-off-by: Alan Jian <alanjian85@outlook.com>
Message-id: 20220725145838.8412-1-alanjian85@outlook.com
[PMM: tweaked commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an asynchronous version of i2c_send() that requires the slave to
explicitly acknowledge on the bus with i2c_ack().
The current master must use the new i2c_start_send_async() to indicate
that it wants to do an asynchronous transfer. This allows the i2c core
to check if the target slave supports this or not. This approach relies
on adding a new enum i2c_event member, which is why a bunch of other
devices needs changes in their event handling switches.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220601210831.67259-5-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220630045133.32251-6-me@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This fixes the output of "info qom-tree" so that the buffers appear as children
of the artist device, rather than underneath the "unattached" container.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220624160839.886649-1-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Helge Deller <deller@gmx.de>
This change adds a new member, refresh_rate to QemuUIInfo in
include/ui/console.h. It represents the refresh rate of the
physical display backend, and it is more appropriate than
GUI update interval as the refresh rate which the emulated device
reports:
- sdl may set GUI update interval shorter than the refresh rate
of the physical display to respond to user-generated events.
- sdl and vnc aggressively changes GUI update interval, but
a guests is typically not designed to respond to frequent
refresh rate changes, or frequent "display mode" changes in
general. The frequency of refresh rate changes of the physical
display backend matches better to the guest's expectation.
QemuUIInfo also has other members representing "display mode",
which makes it suitable for refresh rate representation. It has
a throttling of update notifications, and prevents frequent changes
of the display mode.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220226115516.59830-3-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The returned value is not used and misleading.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220226115516.59830-2-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It only needs to update the scanouts containing the rect area
coming with the resource-flush request from the guest.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20220505214030.4261-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix interrupt disable logic. Mask value 1 indicates that interrupts are
disabled.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220601172353.3220232-4-fkonrad@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a periodic timer which raises vblank at a frequency of 30Hz.
Note that this is a migration compatibility break for the
xlnx-zcu102 board type.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220601172353.3220232-3-fkonrad@xilinx.com
Changes by fkonrad:
- Switched to transaction-based ptimer API.
- Added the DP_INT_VBLNK_START macro.
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
[PMM: bump vmstate version, add commit message note about
compat break]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The core and the vblend registers size are wrong, they should respectively be
0x3B0 and 0x1E0 according to:
https://www.xilinx.com/htmldocs/registers/ug1087/ug1087-zynq-ultrascale-registers.html.
Let's fix that and use macros when creating the mmio region.
Fixes: 58ac482a66 ("introduce xlnx-dp")
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220601172353.3220232-2-fkonrad@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
module_kconfig is a new directive that should be used with module_obj
whenever that module depends on the Kconfig to be enabled.
When the module is enabled in Kconfig we are sure that its dependencies
will be enabled as well, thus the module will be loaded without any
problem.
The correct way to use module_kconfig is by passing the Kconfig option
to module_kconfig (or the *config-devices.mak without CONFIG_).
Signed-off-by: Jose R. Ziviani <jziviani@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Message-Id: <165369002370.5857.12150544416563557322.stgit@work>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This series updates the SeaBIOS-hppa firmware to version 5, in which additional
HP fonts were added to the firmware and the firmware boot console was fixed to
accept input from the emulated PS/2 keyboard when running in graphical mode
(serial console was working before already). To test use the "-boot menu=on"
qemu option.
The artist graphics card driver got various fixes when running the X11-Windows
on HP-UX:
- fixes the horizontal and vertical postioning of the X11 cursor with HP-UX
- allows X11 to blank the screen (e.g. screensaver)
- allows the X11 driver to turn the X11 cursor on/off
Signed-off-by: Helge Deller <deller@gmx.de>
--
Changes compared to version 2 of this series:
- Fixed style issues in the X-cursor positioning patch (noticed by Mark Cave-Ayland)
Changes compared to version 1 of this series:
- Added some Acked-by's from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- SeaBIOS-hppa v5 instead of v4 (PS/2 keyboard now works in boot console)
- integrated artist X11 X-cusor positioning fix (which was sent serperately before)
--
This series should apply cleanly on git head and can be pulled for testing
from: https://github.com/hdeller/qemu-hppa.git artist-cursor-fix-final
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYoUcLwAKCRD3ErUQojoP
X/joAQCmuV5MD+BTWf91fRTfzXSfOYSp1XahTaItUldKG2ZBWQD+Lflhsoyg4xLd
2daeDRN1tH2HWldjnCPyMyZ5Ag97PwY=
=ZrTm
-----END PGP SIGNATURE-----
Merge tag 'artist-cursor-fix-final-pull-request' of https://github.com/hdeller/qemu-hppa into staging
hppa: Artist graphics driver fixes for HP-UX and keyboard fix in firmware boot console
This series updates the SeaBIOS-hppa firmware to version 5, in which additional
HP fonts were added to the firmware and the firmware boot console was fixed to
accept input from the emulated PS/2 keyboard when running in graphical mode
(serial console was working before already). To test use the "-boot menu=on"
qemu option.
The artist graphics card driver got various fixes when running the X11-Windows
on HP-UX:
- fixes the horizontal and vertical postioning of the X11 cursor with HP-UX
- allows X11 to blank the screen (e.g. screensaver)
- allows the X11 driver to turn the X11 cursor on/off
Signed-off-by: Helge Deller <deller@gmx.de>
--
Changes compared to version 2 of this series:
- Fixed style issues in the X-cursor positioning patch (noticed by Mark Cave-Ayland)
Changes compared to version 1 of this series:
- Added some Acked-by's from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- SeaBIOS-hppa v5 instead of v4 (PS/2 keyboard now works in boot console)
- integrated artist X11 X-cusor positioning fix (which was sent serperately before)
--
This series should apply cleanly on git head and can be pulled for testing
from: https://github.com/hdeller/qemu-hppa.git artist-cursor-fix-final
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYoUcLwAKCRD3ErUQojoP
# X/joAQCmuV5MD+BTWf91fRTfzXSfOYSp1XahTaItUldKG2ZBWQD+Lflhsoyg4xLd
# 2daeDRN1tH2HWldjnCPyMyZ5Ag97PwY=
# =ZrTm
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 May 2022 09:17:51 AM PDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'artist-cursor-fix-final-pull-request' of https://github.com/hdeller/qemu-hppa:
artist: Fix X cursor position calculation in X11
artist: Emulate screen blanking
artist: Allow to turn cursor on or off
artist: Fix vertical X11 cursor position in HP-UX
artist: Use human-readable variable names instead of reg_xxx
artist: Introduce constant for max cursor size
seabios-hppa: Update SeaBIOS-hppa to VERSION 5
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The X cursor postion can be calculated based on the backporch and
interleave values. In the emulation we ignore the HP-UX settings for
backporch and use instead twice the size of the emulated cursor. With
those changes the X-position of the graphics cursor is now finally
working correctly on HP-UX 10 and HP-UX 11.
Based on coding in Xorg X11R6.6
Signed-off-by: Helge Deller <deller@gmx.de>
The misc_video and misc_ctrl registers control the visibility of the
screen. Start with the screen turned on, and hide or show the screen
based on the control registers.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Bit 0x80 in the cursor_cntrl register specifies if the cursor
should be visible. Prevent rendering the cursor if it's invisible.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Drop the hard-coded value of 1146 lines which seems to work with HP-UX
11, but not with HP-UX 10. Instead encode the screen height in byte 0 of
active_lines_low and byte 3 of misc_video as it's expected by the Xorg
X11 graphics driver.
This potentially allows for higher vertical screen resolutions than
1280x1024 with X11.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Convert the variable names of some registers to human-readable and
understandable names.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Add the constant NGLE_MAX_SPRITE_SIZE which defines the currently
maximum supported cursor size.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This patch adds a get_vhost() callback function for VirtIODevices that
returns the device's corresponding vhost_dev structure, if the vhost
device is running. This patch also adds a vhost_started flag for
VirtIODevices.
Previously, a VirtIODevice wouldn't be able to tell if its corresponding
vhost device was active or not.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-3-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch drops the name parameter for the virtio_init function.
The pair between the numeric device ID and the string device ID
(name) of a virtio device already exists, but not in a way that
lets us map between them.
This patch lets us do this and removes the need for the name
parameter in the virtio_init function.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-2-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The framebuffer_update_display() function returns the dirty scanlines that were
touched since the last display update, however artist_update_display() always calls
dpy_gfx_update() with start and end scanlines of 0 and s->height causing the
entire display surface to be rendered on every update.
Update artist_update_display() so that dpy_gfx_update() only renders the dirty
scanlines on the display surface, bypassing the display surface rendering
completely if framebuffer_update_display() indicates no changes occurred.
This noticeably improves boot performance when the framebuffer is enabled on my
rather modest laptop here, including making the GTK UI usable.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220504153708.10352-4-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This macro is unused and so can simply be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220504153708.10352-3-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Ensure that subsequent patches do not cause checkpatch to fail and also tidy up
extra/missing newlines.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220504153708.10352-2-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
In certain circumstances, typically when there is lots changing on the
screen, updates will be discarded resulting in garbled output.
This change simplifies the traversal of the display update FIFO queue
when applying updates. We just track the queue length and iterate up to
the end of the queue.
Additionally when adding updates to the queue, if the buffer reaches
capacity we force a flush before accepting further events.
Signed-off-by: Carwyn Ellis <carwynellis@gmail.com>
Message-Id: <20220206183956.10694-3-carwynellis@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* whpx support for breakpoints and stepping
* initial support for Hyper-V Synthetic Debugging
* use monotonic clock for QemuCond and QemuSemaphore
* Remove qemu-common.h include from most units and lots of other clenaups
* do not include headers for all virtio devices in virtio-ccw.h
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJXCQAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNT6wf+NHDJUEdDiwaVGVTGXgHuiaycsymi
FpNPiw/+XxSGN5xF3fkUGgqaDrcwIYwVfnXlghKSz8kp1cP3cjxa5CzNMLGTp5je
N6BxFbD7yC6dhagGm3mj32jlsptv3M38OHqKc3t+RaUAotP5RF2VdCyfUBLG6vU0
aMzvMfMtB5aG0D8Fr5EV63t1JMTceFU0YxsG73UCFs2Yx4Z0cGBbNxMbHweRhd1q
tPeVDS46MFPM3/2cGGHpeeqxkoCTU7A9j1VuNQI3k+Kg+6W5YVxiK/UP7bw77E/a
yAHsmIVTNro8ajMBch73weuHtGtdfFLvCKc6QX6aVjzK4dF1voQ01E7gPQ==
=rMle
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Add cpu0-id to query-sev-capabilities
* whpx support for breakpoints and stepping
* initial support for Hyper-V Synthetic Debugging
* use monotonic clock for QemuCond and QemuSemaphore
* Remove qemu-common.h include from most units and lots of other clenaups
* do not include headers for all virtio devices in virtio-ccw.h
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJXCQAUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNT6wf+NHDJUEdDiwaVGVTGXgHuiaycsymi
# FpNPiw/+XxSGN5xF3fkUGgqaDrcwIYwVfnXlghKSz8kp1cP3cjxa5CzNMLGTp5je
# N6BxFbD7yC6dhagGm3mj32jlsptv3M38OHqKc3t+RaUAotP5RF2VdCyfUBLG6vU0
# aMzvMfMtB5aG0D8Fr5EV63t1JMTceFU0YxsG73UCFs2Yx4Z0cGBbNxMbHweRhd1q
# tPeVDS46MFPM3/2cGGHpeeqxkoCTU7A9j1VuNQI3k+Kg+6W5YVxiK/UP7bw77E/a
# yAHsmIVTNro8ajMBch73weuHtGtdfFLvCKc6QX6aVjzK4dF1voQ01E7gPQ==
# =rMle
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 13 Apr 2022 10:31:44 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (53 commits)
target/i386: Remove unused XMMReg, YMMReg types and CPUState fields
target/i386: do not access beyond the low 128 bits of SSE registers
virtio-ccw: do not include headers for all virtio devices
virtio-ccw: move device type declarations to .c files
virtio-ccw: move vhost_ccw_scsi to a separate file
s390x: follow qdev tree to detect SCSI device on a CCW bus
hw: hyperv: Initial commit for Synthetic Debugging device
hyperv: Add support to process syndbg commands
hyperv: Add definitions for syndbg
hyperv: SControl is optional to enable SynIc
thread-posix: optimize qemu_sem_timedwait with zero timeout
thread-posix: implement Semaphore with QemuCond and QemuMutex
thread-posix: use monotonic clock for QemuCond and QemuSemaphore
thread-posix: remove the posix semaphore support
whpx: Added support for breakpoints and stepping
build-sys: simplify AF_VSOCK check
build-sys: drop ntddscsi.h check
Remove qemu-common.h include from most units
qga: remove explicit environ argument from exec/spawn
Move fcntl_setfl() to oslib-posix
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prevent potential integer overflow by limiting 'width' and 'height' to
512x512. Also change 'datasize' type to size_t. Refer to security
advisory https://starlabs.sg/advisories/22-4206/ for more information.
Fixes: CVE-2021-4206
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220407081712.345609-1-mcascell@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Avoid fetching 'width' and 'height' a second time to prevent possible
race condition. Refer to security advisory
https://starlabs.sg/advisories/22-4207/ for more information.
Fixes: CVE-2021-4207
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220407081106.343235-1-mcascell@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
