Switch to use QNum/uint where appropriate to remove i64 limitation.
The input visitor will cast i64 input to u64 for compatibility
reasons (existing json QMP client already use negative i64 for large
u64, and expect an implicit cast in qemu).
Note: before the patch, uint64_t values above INT64_MAX are sent over
json QMP as negative values, e.g. UINT64_MAX is sent as -1. After the
patch, they are sent unmodified. Clearly a bug fix, but we have to
consider compatibility issues anyway. libvirt should cope fine,
because its parsing of unsigned integers accepts negative values
modulo 2^64. There's hope that other clients will, too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-12-marcandre.lureau@redhat.com>
[check_native_list() tweaked for consistency with signed case]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.
Add a few more tests while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit e987c37aee ("hw/i386: check if
nvdimm is enabled before plugging") introduced a check to reject nvdimm
hotplug if -machine pc,nvdimm=on was not given.
This check executes after pc_dimm_memory_plug() has already completed
and does not reverse the effect of this function in the case of failure.
Perform the check before calling pc_dimm_memory_plug(). This fixes the
following abort:
$ qemu -M accel=kvm -m 1G,slots=4,maxmem=8G \
-object memory-backend-file,id=mem1,share=on,mem-path=nvdimm.dat,size=1G
(qemu) device_add nvdimm,memdev=mem1
nvdimm is not enabled: missing 'nvdimm' in '-M'
(qemu) device_add nvdimm,memdev=mem1
Core dumped
The backtrace is:
#0 0x00007fffdb5b191f in raise () at /lib64/libc.so.6
#1 0x00007fffdb5b351a in abort () at /lib64/libc.so.6
#2 0x00007fffdb5a9da7 in __assert_fail_base () at /lib64/libc.so.6
#3 0x00007fffdb5a9e52 in () at /lib64/libc.so.6
#4 0x000055555577a5fa in qemu_ram_set_idstr (new_block=0x555556747a00, name=<optimized out>, dev=dev@entry=0x555556705590) at qemu/exec.c:1709
#5 0x0000555555a0fe86 in vmstate_register_ram (mr=mr@entry=0x55555673a0e0, dev=dev@entry=0x555556705590) at migration/savevm.c:2293
#6 0x0000555555965088 in pc_dimm_memory_plug (dev=dev@entry=0x555556705590, hpms=hpms@entry=0x5555566bb0e0, mr=mr@entry=0x555556705630, align=<optimized out>, errp=errp@entry=0x7fffffffc660)
at hw/mem/pc-dimm.c:110
#7 0x000055555581d89b in pc_dimm_plug (errp=0x7fffffffc6c0, dev=0x555556705590, hotplug_dev=<optimized out>) at qemu/hw/i386/pc.c:1713
#8 0x000055555581d89b in pc_machine_device_plug_cb (hotplug_dev=<optimized out>, dev=0x555556705590, errp=0x7fffffffc6c0) at qemu/hw/i386/pc.c:2004
#9 0x0000555555914da6 in device_set_realized (obj=<optimized out>, value=<optimized out>, errp=0x7fffffffc7e8) at hw/core/qdev.c:926
Cc: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move the memcpy upper into where needed, then share the trace so that we
trace every correct remapping.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
First, let vtd_do_iommu_translate() return a status, so that we
explicitly knows whether error occured. Meanwhile, we make sure that
IOMMUTLBEntry is filled in in that.
Then, cleanup vtd_iommu_translate a bit. So even with PT we'll get a log
now. Also, remove useless assignments.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We have converted many of the DPRINTF() into traces. This patch does the
last 100+ ones.
To debug VT-d when error happens, let's try enable:
-trace enable="vtd_err*"
This should works just like the old GENERAL but of course better, since
we don't need to recompile.
Similar rules apply to the other modules. I was trying to make the
prefix good enough for sub-module debugging.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It don't belong anywhere else, just the global state where everybody
can stick other things.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Do an update of system_time_msr address every time before reading
the value of tsc_timestamp from guest's kvmclock page.
There is no other code paths which ensure that qemu has an up-to-date
value of system_time_msr. So, force this update on guest's tsc_timestamp
reading.
This bug causes effect on those nested setups which turn off TPR access
interception for L2 guests and that access being intercepted by L0 doesn't
show up in L1.
Linux bootstrap initiate kvmclock before APIC initializing causing TPR access.
That's why on L1 guests, having TPR interception turned on for L2, the effect
of the bug is not revealed.
This patch fixes this problem by making sure it knows the correct
system_time_msr address every time it is needed.
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <1496054944-25623-1-git-send-email-dplotnikov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It fixes/add missing _PXM object for non mapped CPU (x86)
and missing fdt node (virt-arm).
It ensures that possible_cpus contains complete mapping if
numa is enabled by the time machine_init() is executed.
As result non completely mapped CPUs:
1) appear in ACPI/fdt blobs
2) QMP query-hotpluggable-cpus command shows bound nodes for such CPUs
3) allows to drop checks for has_node_id in numa only code,
reducing number of invariants incomplete mapping could produce
4) moves fixup/implicit node init from runtime numa_cpu_pre_plug()
(when CPU object is created) to machine_numa_finish_init() which
helps to fix [1, 2] and make possible_cpus complete source
of numa mapping available even before CPUs are created.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1496161442-96665-4-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Those are apparently unnecessary includes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
A bunch of fixes all over the place. Most notably this fixes
the new MTU feature when using vhost.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZK2bwAAoJECgfDbjSjVRpNBgIALmNG7VaixhNUlnfX1n1JBnh
+HBP2zNfvi0q5roBuPFmlziKa3IBHb2Fcte4nb6QxmPg+uoaj39AOzfrrvz210kR
h2j5Qk2bCdMeWBpxI+xDDScwi/Im23Y6KN1eZyMekFr2CaSGiqOHZPPdbsyEcHPB
VylM0uHqSTZL5JAAzEuYlH+LLfPu91HoxMsIAdNuQX+qKyM2DZ4eICBQ0zA73USt
OduZltcRMk7UpvQMqY+2iaEXapXQQEUGrP2Mo8ZyqeIl2ItC33GspqBQIKjuZdrr
tpr/T1VWsLdZnURZXyELrFqrErDXvKaP9HROwvyLyYPXZF+pJ3LA7TopS5UmfNQ=
=Z4xG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_upstream' into staging
pci, virtio, vhost: fixes
A bunch of fixes all over the place. Most notably this fixes
the new MTU feature when using vhost.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 29 May 2017 01:10:24 AM BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* mst/tags/for_upstream:
acpi-test: update expected files
pc: ACPI BIOS: use highest NUMA node for hotplug mem hole SRAT entry
vhost-user: pass message as a pointer to process_message_reply()
virtio_net: Bypass backends for MTU feature negotiation
intel_iommu: turn off pt before 2.9
intel_iommu: support passthrough (PT)
intel_iommu: allow dev-iotlb context entry conditionally
intel_iommu: use IOMMU_ACCESS_FLAG()
intel_iommu: provide vtd_ce_get_type()
intel_iommu: renaming context entry helpers
x86-iommu: use DeviceClass properties
memory: remove the last param in memory_region_iommu_replay()
memory: tune last param of iommu_ops.translate()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For reasons unknown, Windows won't online all memory, both at command
line and hot-plugged later, unless the hotplug mem hole SRAT entry
specifies a node greater than or equal to the ones where memory is
added.
Using the highest node on the machine makes recent versions of Windows
happy.
With this example command line:
... \
-m 1024,slots=4,maxmem=32G \
-numa node,nodeid=0 \
-numa node,nodeid=1 \
-numa node,nodeid=2 \
-numa node,nodeid=3 \
-object memory-backend-ram,size=1G,id=mem-mem1 \
-device pc-dimm,id=dimm-mem1,memdev=mem-mem1,node=1
Windows reports a total of 1G of RAM without this commit and the expected
2G with this commit.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Hardware support for VT-d device passthrough. Although current Linux can
live with iommu=pt even without this, but this is faster than when using
software passthrough.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Liu, Yi L <yi.l.liu@linux.intel.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
When device-iotlb is not specified, we should fail this check. A new
function vtd_ce_type_check() is introduced.
While I'm at it, clean up the vtd_dev_to_context_entry() a bit - replace
many "else if" usage into direct if check. That'll make the logic more
clear.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
We have that now, so why not use it.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Helper to fetch VT-d context entry type.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
The old names are too long and less ordered. Let's start to use
vtd_ce_*() as a pattern.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
No reason to keep tens of lines if we can do it actually far shorter.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
This patch converts the old "is_write" bool into IOMMUAccessFlags. The
difference is that "is_write" can only express either read/write, but
sometimes what we really want is "none" here (neither read nor write).
Replay is an good example - during replay, we should not check any RW
permission bits since thats not an actual IO at all.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Time to wire up all the call sites that request a shutdown or
reset to use the enum added in the previous patch.
It would have been less churn to keep the common case with no
arguments as meaning guest-triggered, and only modified the
host-triggered code paths, via a wrapper function, but then we'd
still have to audit that I didn't miss any host-triggered spots;
changing the signature forces us to double-check that I correctly
categorized all callers.
Since command line options can change whether a guest reset request
causes an actual reset vs. a shutdown, it's easy to also add the
information to reset requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts]
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts]
Message-Id: <20170515214114.15442-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We want to track why a guest was shutdown; in particular, being able
to tell the difference between a guest request (such as ACPI request)
and host request (such as SIGINT) will prove useful to libvirt.
Since all requests eventually end up changing shutdown_requested in
vl.c, the logical change is to make that value track the reason,
rather than its current 0/1 contents.
Since command-line options control whether a reset request is turned
into a shutdown request instead, the same treatment is given to
reset_requested.
This patch adds an internal enum ShutdownCause that describes reasons
that a shutdown can be requested, and changes qemu_system_reset() to
pass the reason through, although for now nothing is actually changed
with regards to what gets reported. The enum could be exported via
QAPI at a later date, if deemed necessary, but for now, there has not
been a request to expose that much detail to end clients.
For the most part, we turn 0 into SHUTDOWN_CAUSE_NONE, and 1 into
SHUTDOWN_CAUSE_HOST_ERROR; the only specific case where we have enough
information right now to use a different value is when we are reacting
to a host signal. It will take a further patch to edit all call-sites
that can trigger a reset or shutdown request to properly pass in any
other reasons; this patch includes TODOs to point such places out.
qemu_system_reset() trades its 'bool report' parameter for a
'ShutdownCause reason', with all non-zero values having the same
effect; this lets us get rid of the weird #defines for VMRESET_*
as synonyms for bools.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170515214114.15442-3-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This files don't use any function from migration.h, so drop it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
A bunch of fixes that missed the release.
Most notably we are reverting shpc back to enabled by default state
as guests uses that as an indicator that hotplug is supported
(even though it's unused). Unfortunately we can't fix this
on the stable branch since that would break migration.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZHMOuAAoJECgfDbjSjVRp/5IH/3kOa7yV3KUi4QVbQV7WwBH3
LK+/jwIz4UhOZn+bS4qi+gjN6aFhNoBNDFmYsRTWKKdLMvZvkRBMDcv8DMIKeAyl
kG/ispv8VI+GY/CRKnqzPm0FSulv8WPRryxkdGzK4oHiMv+4FpFR0v/n9NRHjwTA
XNJ4k33IqBldXyZwwAzP5dT019EMvbn4bNrkLzlcF2w8mTWPf43eX/kIkRX0cAys
5IVTQVGEOwpnyV0jxJDP+aoVMrqv8xl88LLuRpTgWUo0UnxXL5/GZQOCCUN6DQ7M
BOLmyyP9mT9k8iUI+fQsDxAtY7cL9torq+p985nQdH0nxmI3GCoufn9aJG0J9yc=
=d34x
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_upstream' into staging
pci, virtio, vhost: fixes
A bunch of fixes that missed the release.
Most notably we are reverting shpc back to enabled by default state
as guests uses that as an indicator that hotplug is supported
(even though it's unused). Unfortunately we can't fix this
on the stable branch since that would break migration.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 17 May 2017 10:42:06 PM BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* mst/tags/for_upstream:
exec: abstract address_space_do_translate()
pci: deassert intx when pci device unrealize
virtio: allow broken device to notify guest
Revert "hw/pci: disable pci-bridge's shpc by default"
acpi-defs: clean up open brace usage
ACPI: don't call acpi_pcihp_device_plug_cb on xen
iommu: Don't crash if machine is not PC_MACHINE
pc: add 2.10 machine type
pc/fwcfg: unbreak migration from qemu-2.5 and qemu-2.6 during firmware boot
libvhost-user: fix crash when rings aren't ready
hw/virtio: fix vhost user fails to startup when MQ
hw/arm/virt: generate 64-bit addressable ACPI objects
hw/acpi-defs: replace leading X with x_ in FADT field names
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The kvmvapic device is only usable when created by
apic_common_realize(), not using -device. Remove the
user_creatable flag from the device class.
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-10-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
An ioapic device is already created by the q35 initialization
code, and using "-device ioapic" or "-device kvm-ioapic" will
always fail with "Only 1 ioapics allowed". Remove the
user_creatable flag from the ioapic device classes.
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-9-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
kvmclock should be used by guests only when the appropriate CPUID
feature flags are set on the VCPU, and it is automatically
created by kvmclock_create() when those feature flags are set.
This means creating a kvmclock device using -device is useless.
Remove user_creatable from its device class.
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Thomas Huth <thuth@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-8-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
amd-iommu and intel-iommu are really meant to be used with
-device, so they need user_creatable=true. Remove the FIXME
comment.
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-5-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
commit 33cd52b5d7 unset
cannot_instantiate_with_device_add_yet in TYPE_SYSBUS, making all
sysbus devices appear on "-device help" and lack the "no-user"
flag in "info qdm".
To fix this, we can set user_creatable=false by default on
TYPE_SYS_BUS_DEVICE, but this requires setting
user_creatable=true explicitly on the sysbus devices that
actually work with -device.
Fortunately today we have just a few has_dynamic_sysbus=1
machines: virt, pc-q35-*, ppce500, and spapr.
virt, ppce500, and spapr have extra checks to ensure just a few
device types can be instantiated:
* virt supports only TYPE_VFIO_CALXEDA_XGMAC, TYPE_VFIO_AMD_XGBE.
* ppce500 supports only TYPE_ETSEC_COMMON.
* spapr supports only TYPE_SPAPR_PCI_HOST_BRIDGE.
This patch sets user_creatable=true explicitly on those 4 device
classes.
Now, the more complex cases:
pc-q35-*: q35 has no sysbus device whitelist yet (which is a
separate bug). We are in the process of fixing it and building a
sysbus whitelist on q35, but in the meantime we can fix the
"-device help" and "info qdm" bugs mentioned above. Also, despite
not being strictly necessary for fixing the q35 bug, reducing the
list of user_creatable=true devices will help us be more
confident when building the q35 whitelist.
xen: We also have a hack at xen_set_dynamic_sysbus(), that sets
has_dynamic_sysbus=true at runtime when using the Xen
accelerator. This hack is only used to allow xen-backend devices
to be dynamically plugged/unplugged.
This means today we can use -device with the following 22 device
types, that are the ones compiled into the qemu-system-x86_64 and
qemu-system-i386 binaries:
* allwinner-ahci
* amd-iommu
* cfi.pflash01
* esp
* fw_cfg_io
* fw_cfg_mem
* generic-sdhci
* hpet
* intel-iommu
* ioapic
* isabus-bridge
* kvmclock
* kvm-ioapic
* kvmvapic
* SUNW,fdtwo
* sysbus-ahci
* sysbus-fdc
* sysbus-ohci
* unimplemented-device
* virtio-mmio
* xen-backend
* xen-sysdev
This patch adds user_creatable=true explicitly to those devices,
temporarily, just to keep 100% compatibility with existing
behavior of q35. Subsequent patches will remove
user_creatable=true from the devices that are really not meant to
user-creatable on any machine, and remove the FIXME comment from
the ones that are really supposed to be user-creatable. This is
being done in separate patches because we still don't have an
obvious list of devices that will be whitelisted by q35, and I
would like to get each device reviewed individually.
Cc: Alexander Graf <agraf@suse.de>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Beniamino Galvani <b.galvani@gmail.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Frank Blaschka <frank.blaschka@de.ibm.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Pierre Morel <pmorel@linux.vnet.ibm.com>
Cc: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-arm@nongnu.org
Cc: qemu-block@nongnu.org
Cc: qemu-ppc@nongnu.org
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rob Herring <robh@kernel.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: sstabellini@kernel.org
Cc: Thomas Huth <thuth@redhat.com>
Cc: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-3-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[ehabkost: Small changes at sysbus_device_class_init() comments]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
cannot_instantiate_with_device_add_yet was introduced by commit
efec3dd631 to replace no_user. It was
supposed to be a temporary measure.
When it was introduced, we had 54
cannot_instantiate_with_device_add_yet=true lines in the code.
Today (3 years later) this number has not shrunk: we now have
57 cannot_instantiate_with_device_add_yet=true lines. I think it
is safe to say it is not a temporary measure, and we won't see
the flag go away soon.
Instead of a long field name that misleads people to believe it
is temporary, replace it a shorter and less misleading field:
user_creatable.
Except for code comments, changes were generated using the
following Coccinelle patch:
@@
expression DC;
@@
(
-DC->cannot_instantiate_with_device_add_yet = false;
+DC->user_creatable = true;
|
-DC->cannot_instantiate_with_device_add_yet = true;
+DC->user_creatable = false;
)
@@
typedef ObjectClass;
expression dc;
identifier class, data;
@@
static void device_class_init(ObjectClass *class, void *data)
{
...
dc->hotpluggable = true;
+dc->user_creatable = true;
...
}
@@
@@
struct DeviceClass {
...
-bool cannot_instantiate_with_device_add_yet;
+bool user_creatable;
...
}
@@
expression DC;
@@
(
-!DC->cannot_instantiate_with_device_add_yet
+DC->user_creatable
|
-DC->cannot_instantiate_with_device_add_yet
+!DC->user_creatable
)
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Thomas Huth <thuth@redhat.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-2-ehabkost@redhat.com>
[ehabkost: kept "TODO remove once we're there" comment]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The Xen mapcache is able to create long term mappings, they are called
"locked" mappings. The third parameter of the xen_map_cache call
specifies if a mapping is a "locked" mapping.
>From the QEMU point of view there are two kinds of long term mappings:
[a] device memory mappings, such as option roms and video memory
[b] dma mappings, created by dma_memory_map & friends
After certain operations, ballooning a VM in particular, Xen asks QEMU
kindly to destroy all mappings. However, certainly [a] mappings are
present and cannot be removed. That's not a problem as they are not
affected by balloonning. The *real* problem is that if there are any
mappings of type [b], any outstanding dma operations could fail. This is
a known shortcoming. In other words, when Xen asks QEMU to destroy all
mappings, it is an error if any [b] mappings exist.
However today we have no way of distinguishing [a] from [b]. Because of
that, we cannot even print a decent warning.
This patch introduces a new "dma" bool field to MapCacheRev entires, to
remember if a given mapping is for dma or is a long term device memory
mapping. When xen_invalidate_map_cache is called, we print a warning if
any [b] mappings exist. We ignore [a] mappings.
Mappings created by qemu_map_ram_ptr are assumed to be [a], while
mappings created by address_space_map->qemu_ram_ptr_length are assumed
to be [b].
The goal of the patch is to make debugging and system understanding
easier.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <1494415802-227633-9-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
it will allow switching from cpu_index to property based
numa mapping in follow up patches.
PS:
patch changes default value of CPUState::numa_node from 0
to CPU_UNSET_NUMA_NODE_ID. The only place for x86 that
would affected is monitor's 'infor numa' command which
uses that field. However legacy 0 value is still preserved
by pc_cpu_pre_plug() in this patch if user/numa.c hasn't
set it explicitly, so there is no change in behavior.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1494415802-227633-4-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Originally CPU threads were by default assigned in
round-robin fashion. However it was causing issues in
guest since CPU threads from the same socket/core could
be placed on different NUMA nodes.
Commit fb43b73b (pc: fix default VCPU to NUMA node mapping)
fixed it by grouping threads within a socket on the same node
introducing cpu_index_to_socket_id() callback and commit
20bb648d (spapr: Fix default NUMA node allocation for threads)
reused callback to fix similar issues for SPAPR machine
even though socket doesn't make much sense there.
As result QEMU ended up having 3 default distribution rules
used by 3 targets /virt-arm, spapr, pc/.
In effort of moving NUMA mapping for CPUs into possible_cpus,
generalize default mapping in numa.c by making boards decide
on default mapping and let them explicitly tell generic
numa code to which node a CPU thread belongs to by replacing
cpu_index_to_socket_id() with @cpu_index_to_instance_props()
which provides default node_id assigned by board to specified
cpu_index.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1494415802-227633-2-git-send-email-imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When there are more nodes than available memory to put the minimum
allowed memory by node, all the memory is put on the last node.
This is because we put (ram_size / nb_numa_nodes) &
~((1 << mc->numa_mem_align_shift) - 1); on each node, and in this
case the value is 0. This is particularly true with pseries,
as the memory must be aligned to 256MB.
To avoid this problem, this patch uses an error diffusion algorithm [1]
to distribute equally the memory on nodes.
We introduce numa_auto_assign_ram() function in MachineClass
to keep compatibility between machine type versions.
The legacy function is used with pseries-2.9, pc-q35-2.9 and
pc-i440fx-2.9 (and previous), the new one with all others.
Example:
qemu-system-ppc64 -S -nographic -nodefaults -monitor stdio -m 1G -smp 8 \
-numa node -numa node -numa node \
-numa node -numa node -numa node
Before:
(qemu) info numa
6 nodes
node 0 cpus: 0 6
node 0 size: 0 MB
node 1 cpus: 1 7
node 1 size: 0 MB
node 2 cpus: 2
node 2 size: 0 MB
node 3 cpus: 3
node 3 size: 0 MB
node 4 cpus: 4
node 4 size: 0 MB
node 5 cpus: 5
node 5 size: 1024 MB
After:
(qemu) info numa
6 nodes
node 0 cpus: 0 6
node 0 size: 0 MB
node 1 cpus: 1 7
node 1 size: 256 MB
node 2 cpus: 2
node 2 size: 0 MB
node 3 cpus: 3
node 3 size: 256 MB
node 4 cpus: 4
node 4 size: 256 MB
node 5 cpus: 5
node 5 size: 256 MB
[1] https://en.wikipedia.org/wiki/Error_diffusion
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170502162955.1610-2-lvivier@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: s/ram_size/size/ at numa_default_auto_assign_ram()]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch is going to add SLIT table support in QEMU, and provides
additional option `dist` for command `-numa` to allow user set vNUMA
distance by QEMU command.
With this patch, when a user wants to create a guest that contains
several vNUMA nodes and also wants to set distance among those nodes,
the QEMU command would like:
```
-numa node,nodeid=0,cpus=0 \
-numa node,nodeid=1,cpus=1 \
-numa node,nodeid=2,cpus=2 \
-numa node,nodeid=3,cpus=3 \
-numa dist,src=0,dst=1,val=21 \
-numa dist,src=0,dst=2,val=31 \
-numa dist,src=0,dst=3,val=41 \
-numa dist,src=1,dst=2,val=21 \
-numa dist,src=1,dst=3,val=31 \
-numa dist,src=2,dst=3,val=21 \
```
Signed-off-by: He Chen <he.chen@linux.intel.com>
Message-Id: <1493260558-20728-1-git-send-email-he.chen@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently it's possible to crash QEMU using "-device *-iommu" and
"-machine none":
$ qemu-system-x86_64 -machine none -device amd-iommu
qemu/hw/i386/amd_iommu.c:1140:amdvi_realize: Object 0x55627dafbc90 is not an instance of type generic-pc-machine
Aborted (core dumped)
$ qemu-system-x86_64 -machine none -device intel-iommu
qemu/hw/i386/intel_iommu.c:2972:vtd_realize: Object 0x56292ec0bc90 is not an instance of type generic-pc-machine
Aborted (core dumped)
Fix amd-iommu and intel-iommu to ensure the current machine is really a
TYPE_PC_MACHINE instance at their realize methods.
Resulting error messages:
$ qemu-system-x86_64 -machine none -device amd-iommu
qemu-system-x86_64: -device amd-iommu: Machine-type 'none' not supported by amd-iommu
$ qemu-system-x86_64 -machine none -device intel-iommu
qemu-system-x86_64: -device intel-iommu: Machine-type 'none' not supported by intel-iommu
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since 2.7 commit (b2a575a Add optionrom compatible with fw_cfg DMA version)
regressed migration during firmware exection time by
abusing fwcfg.dma_enabled property to decide loading
dma version of option rom AND by mistake disabling DMA
for 2.6 and earlier globally instead of only for option rom.
so 2.6 machine type guest is broken when it already runs
firmware in DMA mode but migrated to qemu-2.7(pc-2.6)
at that time;
a) qemu-2.6:pc2.6 (fwcfg.dma=on,firmware=dma,oprom=ioport)
b) qemu-2.7:pc2.6 (fwcfg.dma=off,firmware=ioport,oprom=ioport)
to: a b
from
a OK FAIL
b OK OK
So we currently have broken forward migration from
qemu-2.6 to qemu-2.[789] that however could be fixed
for 2.10 by re-enabling DMA for 2.[56] machine types
and allowing dma capable option rom only since 2.7.
As result qemu should end up with:
c) qemu-2.10:pc2.6 (fwcfg.dma=on,firmware=dma,oprom=ioport)
to: a b c
from
a OK FAIL OK
b OK OK OK
c OK FAIL OK
where forward migration from qemu-2.6 to qemu-2.10 should
work again leaving only qemu-2.[789]:pc-2.6 broken.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the request of Michael, replace the leading capital X in the FADT
field name Xfacs and Xdsdt with lower case x + underscore.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds a clarifying comment and build time assert to the FADT reset register field initialisation: the reset register is the same on both machine types.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-Id: <1489558827-28971-3-git-send-email-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This updates the FADT generated for x86/64 machine types from Revision 1 to 3. (Based on ACPI standard 2.0 instead of 1.0) The intention is to expose the reset register information to guest operating systems which require it, specifically OS X/macOS. Revision 1 FADTs do not contain the fields relating to the reset register.
The new layout and contents remains backwards-compatible with operating systems which only support ACPI 1.0, as the existing fields are not modified by this change, as the 64-bit and 32-bit variants are allowed to co-exist according to the ACPI 2.0 standard. No regressions became apparent in tests with a range of Windows (XP-10) and Linux versions.
The BIOS tables test suite's FADT checksum test has also been updated to reflect the new FADT layout and content.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-Id: <1489558827-28971-2-git-send-email-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OfeB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20170421-v2-tag' into staging
Xen 2017/04/21 + fix
# gpg: Signature made Tue 25 Apr 2017 19:10:37 BST
# gpg: using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# gpg: aka "Stefano Stabellini <sstabellini@kernel.org>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* remotes/sstabellini/tags/xen-20170421-v2-tag: (21 commits)
move xen-mapcache.c to hw/i386/xen/
move xen-hvm.c to hw/i386/xen/
move xen-common.c to hw/xen/
add xen-9p-backend to MAINTAINERS under Xen
xen/9pfs: build and register Xen 9pfs backend
xen/9pfs: send responses back to the frontend
xen/9pfs: implement in/out_iov_from_pdu and vmarshal/vunmarshal
xen/9pfs: receive requests from the frontend
xen/9pfs: connect to the frontend
xen/9pfs: introduce Xen 9pfs backend
9p: introduce a type for the 9p header
xen: import ring.h from xen
configure: use pkg-config for obtaining xen version
xen: additionally restrict xenforeignmemory operations
xen: use libxendevice model to restrict operations
xen: use 5 digit xen versions
xen: use libxendevicemodel when available
configure: detect presence of libxendevicemodel
xen: create wrappers for all other uses of xc_hvm_XXX() functions
xen: rename xen_modified_memory() to xen_hvm_modified_memory()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch is based on Aviv Ben-David (<bd.aviv@gmail.com>)'s patch
upstream:
"IOMMU: enable intel_iommu map and unmap notifiers"
https://lists.gnu.org/archive/html/qemu-devel/2016-11/msg01453.html
However I removed/fixed some content, and added my own codes.
Instead of translate() every page for iotlb invalidations (which is
slower), we walk the pages when needed and notify in a hook function.
This patch enables vfio devices for VT-d emulation.
And, since we already have vhost DMAR support via device-iotlb, a
natural benefit that this patch brings is that vt-d enabled vhost can
live even without ATS capability now. Though more tests are needed.
Signed-off-by: Aviv Ben-David <bdaviv@cs.technion.ac.il>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1491562755-23867-10-git-send-email-peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This is preparation work to finally enabled dynamic switching ON/OFF for
VT-d protection. The old VT-d codes is using static IOMMU address space,
and that won't satisfy vfio-pci device listeners.
Let me explain.
vfio-pci devices depend on the memory region listener and IOMMU replay
mechanism to make sure the device mapping is coherent with the guest
even if there are domain switches. And there are two kinds of domain
switches:
(1) switch from domain A -> B
(2) switch from domain A -> no domain (e.g., turn DMAR off)
Case (1) is handled by the context entry invalidation handling by the
VT-d replay logic. What the replay function should do here is to replay
the existing page mappings in domain B.
However for case (2), we don't want to replay any domain mappings - we
just need the default GPA->HPA mappings (the address_space_memory
mapping). And this patch helps on case (2) to build up the mapping
automatically by leveraging the vfio-pci memory listeners.
Another important thing that this patch does is to seperate
IR (Interrupt Remapping) from DMAR (DMA Remapping). IR region should not
depend on the DMAR region (like before this patch). It should be a
standalone region, and it should be able to be activated without
DMAR (which is a common behavior of Linux kernel - by default it enables
IR while disabled DMAR).
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1491562755-23867-9-git-send-email-peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The default replay() don't work for VT-d since vt-d will have a huge
default memory region which covers address range 0-(2^64-1). This will
normally consumes a lot of time (which looks like a dead loop).
The solution is simple - we don't walk over all the regions. Instead, we
jump over the regions when we found that the page directories are empty.
It'll greatly reduce the time to walk the whole region.
To achieve this, we provided a page walk helper to do that, invoking
corresponding hook function when we found an page we are interested in.
vtd_page_walk_level() is the core logic for the page walking. It's
interface is designed to suite further use case, e.g., to invalidate a
range of addresses.
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1491562755-23867-8-git-send-email-peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We have a specific memory region for DMAR now, so it's wrong to
trigger the notifier with the root region.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1491562755-23867-7-git-send-email-peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
hw/i386/trace-events has an amdvi_mmio_read trace that is used for
both normal reads (listing the register name, address, size, and
offset) and for an error case (abusing the register name to show
an error message, the address to show the maximum value supported,
then shoehorning address and size into the size and offset
parameters). The change from a wide address to a narrower size
parameter could truncate a (rather-large) bogus read attempt, so
it's better to create a separate dedicated trace with correct types,
rather than abusing the trace mechanism. Broken since its
introduction in commit d29a09c.
[Change trace event argument type from hwaddr to uint64_t since
user-defined types should not be used for trace events. This fixes a
build failure with LTTng UST.
--Stefan]
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch creates inline wrapper functions in xen_common.h for all open
coded calls to xc_hvm_XXX() functions outside of xen_common.h so that use
of xen_xc can be made implicit. This again is in preparation for the move
to using libxendevicemodel.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Most machines don't allow sysbus devices like "kvmclock" to be
created from the command-line, but some of them do (the ones with
has_dynamic_sysbus=true). In those cases, it's possible to
manually create a kvmclock device without KVM being enabled,
making QEMU crash:
$ qemu-system-x86_64 -machine q35,accel=tcg -device kvmclock
Segmentation fault (core dumped)
This changes kvmclock's realize method to return an error if KVM
is disabled, to ensure it won't crash QEMU.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170309185046.17555-1-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio support for region caches broke a bunch of stuff - fixing most of
it though it's not ideal. Still pondering the right way to fix it.
New: VM gen ID and hotplug for PXB.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYt7llAAoJECgfDbjSjVRp+r4H/1cmQ4F67H8oSOAT8xuAQFku
OdHoVRJMWf7CRvZ7JqVke/a877d+h6ZpfW5dZQ7hp7O7rkPiuPHa5PVb0WGwDqrD
scSOIvDPxJm19pnfZoF4zx+Ov45W5ahF+gwwm/sJU232ApLqOmAjs0FUxidkadQE
f5Jrjs20WO2Vkkcd3U7Zl31myre0V7AbwIm7dB/8B+dpL6bJcxSvlM4krwLdBY6S
lLs9V6ypRzjUxS3MDANL75KNrO/zys55J+Pa4sEh4+H0OX71v9Icl3s1zaM8J/EN
VPjdqhDvJuEahc50FbJyRZQGIzOZ6PcGMsKUHKlxoVmDYZ6Pv5lOnpaLZRT6HMk=
=ITdO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pc: fixes, features
virtio support for region caches broke a bunch of stuff - fixing most of
it though it's not ideal. Still pondering the right way to fix it.
New: VM gen ID and hotplug for PXB.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 02 Mar 2017 06:19:17 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
hw/pxb-pcie: fix PCI Express hotplug support
tests/acpi: update DSDT after last patch
acpi: simplify _OSC
virtio: unbreak virtio-pci with IOMMU after caching ring translations
virtio: add missing region cache init in virtio_load()
virtio: invalidate memory in vring_set_avail_event()
virtio: guard vring access when setting notification
virtio: check for vring setup in virtio_queue_empty
MAINTAINERS: Add VM Generation ID entries
tests: Move reusable ACPI code into a utility file
qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commands
ACPI: Add Virtual Machine Generation ID support
ACPI: Add vmgenid blob storage to the build tables
docs: VM Generation ID device description
linker-loader: Add new 'write pointer' command
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the missing osc method for pxb-pcie devices as APCI spec recommends,
see 6.2.9.1 OSC Implementation Example for PCI Host Bridge Devices, ACPI 3.0a:
It is recommended that a machine with multiple host bridge devices
should report the same capabilities for all host bridges, and also
negotiate control of the features described in the Control Field in
the same way for all host bridges.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Our _OSC method has a bunch of unused code loading data
into external CTRL and SUPP fields which are then never
used. Drop this in favor of a single local variable.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This implements the VM Generation ID feature by passing a 128-bit
GUID to the guest via a fw_cfg blob.
Any time the GUID changes, an ACPI notify event is sent to the guest
The user interface is a simple device with one parameter:
- guid (string, must be "auto" or in UUID format
xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx)
Signed-off-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI hotplug for bridges was introduced only since 2.0 however
acpi_set_bsel()->object_property_add_uint32_ptr(bus, ACPI_PCIHP_PROP_BSEL)
didn't take in account that for legacy mode (1.7) when
PCI hotplug for bridges is unavailable and ACPI_PCIHP_PROP_BSEL property
the only bus "PCI.0' has been created earlier at acpi_pcihp_init() time.
We managed to live with it only because of error rised by adding
a duplicate property in acpi_set_bsel() has been ignored which
resulted in useless leaking of just allocated (int)bus_bsel.
Issue affects only 1.7 machine type as ACPI tables supported by
QEMU were introduced at that time, but there wasn't PCI hotplug
for bridges till the next release (2.0).
Fix it by removing duplicate ACPI_PCIHP_PROP_BSEL intialization
in acpi_pcihp_init() and doing it only in one place acpi_set_pci_info().
PS:
do not ignore error returned by object_property_add_uint32_ptr()
and abort QEMU since it's programming error which should be fixed
instead of being ignored.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1470211497-116801-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ Marc-André - Remove now unused ACPI_PCIHP_LEGACY_SIZE ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This finally allows TCG to benefit from the iothread introduction: Drop
the global mutex while running pure TCG CPU code. Reacquire the lock
when entering MMIO or PIO emulation, or when leaving the TCG loop.
We have to revert a few optimization for the current TCG threading
model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not
kicking it in qemu_cpu_kick. We also need to disable RAM block
reordering until we have a more efficient locking mechanism at hand.
Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here.
These numbers demonstrate where we gain something:
20338 jan 20 0 331m 75m 6904 R 99 0.9 0:50.95 qemu-system-arm
20337 jan 20 0 331m 75m 6904 S 20 0.9 0:26.50 qemu-system-arm
The guest CPU was fully loaded, but the iothread could still run mostly
independent on a second core. Without the patch we don't get beyond
32206 jan 20 0 330m 73m 7036 R 82 0.9 1:06.00 qemu-system-arm
32204 jan 20 0 330m 73m 7036 S 21 0.9 0:17.03 qemu-system-arm
We don't benefit significantly, though, when the guest is not fully
loading a host CPU.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com>
[FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[EGC: fixed iothread lock for cpu-exec IRQ handling]
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: -smp single-threaded fix, clean commit msg, BQL fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
[PM: target-arm changes]
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Generic helper machine_query_hotpluggable_cpus() replaced
target specific query_hotpluggable_cpus() callbacks so
there is no need in it anymore. However inon NULL callback
value is used to detect/report hotpluggable cpus support,
therefore it can be removed completely.
Replace it with MachineClass.has_hotpluggable_cpus boolean
which is sufficient for the task.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All callbacks FOO_query_hotpluggable_cpus() are practically
the same except of setting vcpus_count to different values.
Convert them to a generic machine_query_hotpluggable_cpus()
callback by moving vcpus_count initialization to per machine
specific callback possible_cpu_arch_ids().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
so it could be reused for SPAPR cores as well
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fill in CpuInstanceProperties once at board init time and
just copy them whenever query_hotpluggable_cpus() is called.
It will keep topology info always available without need
to recalculate it every time it's needed.
Considering it has NUMA node id, it will be used to keep
NUMA node to cpu mapping instead of numa_info[i].node_cpu
bitmasks.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
possible_cpus could be initialized earlier then cpu objects,
i.e. when -smp is parsed so move init code to possible_cpu_arch_ids()
interface func and do initialization on the first call.
it should help later with making -numa cpu/-smp parsing a machine state
properties.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
so that it would be possible to reuse it with
spapr/virt-aarch64 targets.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PC machines (pc-q35-* pc-i440fx-* pc-* isapc xenfv) automatically
create lsi53c895a SCSI HBAs and SCSI devices to honor -drive if=scsi.
For giggles, try -drive if=scsi,bus=25,media=cdrom --- this makes QEMU
create 25 of them.
lsi53c895a is thoroughly obsolete (PCI Ultra2 SCSI, ca. 2000), and
currently has no maintainer in QEMU. megasas is a better choice,
except with old OSes that lack drivers. virtio-scsi is a much better
choice when you have a driver, but only (newish) Linux comes with one
in the box. There is no good default that works for all guests.
Encourage users to pick a non-obsolete SCSI HBA that works for them by
deprecating -drive if=scsi.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-4-git-send-email-armbru@redhat.com>
Acked-By: Paolo Bonzini <pbonzini@redhat.com>
Block backends defined with "-drive if=T" with T other than "none" are
meant to be picked up by machine initialization code: a suitable
frontend gets created and wired up automatically.
Drives defined with if=scsi are also picked up by SCSI HBAs added with
-device, unlike other interface types. Deprecate this usage, as follows.
Create the frontends for onboard HBAs in machine initialization code,
exactly like we do for if=ide and other interface types. Change
scsi_legacy_handle_cmdline() to create a frontend only when it's still
missing, and warn that this usage is deprecated.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-3-git-send-email-armbru@redhat.com>
Block backends defined with -drive if=ide are meant to be picked up by
machine initialization code: a suitable frontend gets created and
wired up automatically.
if=ide drives not picked up that way can still be used with -device as
if they had if=none, but that's unclean and best avoided. Unused ones
produce an "Orphaned drive without device" warning.
-drive parameter "if" is optional, and the default depends on the
machine type. If a machine type doesn't specify a default, the
default is "ide".
Many machine types default to if=ide, even though they don't actually
have an IDE controller. A future patch will change these defaults to
something more sensible. To prepare for it, this patch makes default
"ide" explicit for the machines that actually pick up if=ide drives:
* alpha: clipper
* arm/aarch64: spitz borzoi terrier tosa
* i386/x86_64: generic-pc-machine (with concrete subtypes pc-q35-*
pc-i440fx-* pc-* isapc xenfv)
* mips64el: fulong2e
* mips/mipsel/mips64el: malta mips
* ppc/ppc64: mac99 g3beige prep
* sh4/sh4eb: r2d
* sparc64: sun4u sun4v
Note that ppc64 machine powernv already sets an "ide" default
explicitly. Its IDE controller isn't implemented, yet.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1487153147-11530-2-git-send-email-armbru@redhat.com>
This helps in debugging incorrect level passed in.
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Another patch to convert the DPRINTF() stuffs. This patch focuses on the
address translation path and caching.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VT-d codes are still using static DEBUG_INTEL_IOMMU macro. That's not
good, and we should end the day when we need to recompile the code
before getting useful debugging information for vt-d. Time to switch to
the trace system. This is the first patch to do it.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are lots of places in current intel_iommu.c codes that named
"iova" as "gpa". It is really confusing to use a name "gpa" in these
places (which is very easily to be understood as "Guest Physical
Address", while it's not). To make the codes (much) easier to be read, I
decided to do this once and for all.
No functional change is made. Only literal ones.
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we have a standalone memory region for MSI, all the irq region
requests should be redirected there. Cleaning up the block with an
assertion instead.
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This capability asks the guest to invalidate cache before each map operation.
We can use this invalidation to trap map operations in the hypervisor.
Signed-off-by: Aviv Ben-David <bd.aviv@gmail.com>
[peterx: using "caching-mode" instead of "cache-mode" to align with spec]
[peterx: re-write the subject to make it short and clear]
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Aviv Ben-David <bd.aviv@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1486106298-3699-4-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we do "info ioapic" for kvm ioapic, we were building up a temporary
ioapic object. Let's fetch the real one and update correspond to the
real object as well.
This fixes printing uninitialized version field in
ioapic_print_redtbl().
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1486106298-3699-2-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The missing of 'nvdimm' in the machine type option '-M' means NVDIMM
is disabled. QEMU should refuse to plug any NVDIMM device in this case
and report the misconfiguration.
The behavior of NVDIMM on unsupported platform (HW/FW) is vendor
specific. For some vendors, it's undefined and the platform may do
anything. Thus, I think QEMU is free to choose the implementation.
Aborting QEMU (i.e. refusing to boot) is the easiest one.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: 20170112110928.GF4621@stefanha-x1.localdomain
Message-Id: 20170111093630.2088-1-stefanha@redhat.com
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
We don't use 1ULL which is wrong during size calculation. Fix it, and
while at it, switch to use cto64() and adds a comments to make it
simpler and easier to be understood.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
There are a number of unused trace events that
scripts/cleanup-trace-events.pl finds. The "hw/vfio/pci-quirks.c"
filename was typoed and "qapi/qapi-visit-core.c" was missing the qapi/
directory prefix.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170126171613.1399-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The trace-events for a given source file should generally
always live in the same directory as the source file.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170125161417.31949-5-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Xen HVM unplug protocol [1] specifies a mechanism to allow guests to
request unplug of 'aux' disks (which is stated to mean all IDE disks,
except the primary master). This patch adds support for that unplug request.
NOTE: The semantics of what happens if unplug of all disks and 'aux' disks
is simultaneously requests is not clear. The patch makes that
assumption that an 'all' request overrides an 'aux' request.
[1] http://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/misc/hvm-emulated-unplug.markdown
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
----
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: John Snow <jsnow@redhat.com>
...not just IDE and SCSI.
This patch allows the Xen tool-stack to fully support of NVMe as an
emulated disk type. See [1] for the relevant tool-stack patch discussion.
[1] https://lists.xen.org/archives/html/xen-devel/2017-01/msg01225.html
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The current code is poorly structured and potentially leads to multiple
config space reads when one is sufficient. Also the UNPLUG_ALL_IDE_DISKS
flag is mis-named since it also results in SCSI disks being unplugged.
This patch renames the flag and re-structures the code to be more
efficient, and readable.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
kvmvapic patches the code when some instructions are executed.
E.g. mov 0xff, 0xfffe0080 is interpreted as push 0xff/call ...
This patching is also followed by some side effects (changing apic
and guest memory state). Therefore deterministic execution should take
this operation into account. This patch decreases icount when original
mov instruction is trying to execute. Therefore patching becomes
deterministic and can be replayed correctly.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170124071702.4572.17294.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The patch_hypercalls() function sets up a 'patches'
variable and checks it at the end of the function, but
never modifies it in the middle. Remove this dead code,
which seems to have been present since the function was
added in commit e5ad936b0f in 2012.
(Spotted by Coverity: CID 1005581.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Just check the errno value after fopen and follow it with fstat.
This shuts up Coverity's complaint about TOC/TOU violation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
make sure that external callers won't try to modify
possible_cpus and owner of possible_cpus can access
it directly when it modifies it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1484759609-264075-5-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
move smbios_set_cpuid() close to the rest of smbios init code
where it belongs to instead of calling it from pc_cpus_init().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1484759609-264075-3-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move the generic cpu_synchronize_ functions to the common hw_accel.h header,
in order to prepare for the addition of a second hardware accelerator.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <f5c3cffe8d520011df1c2e5437bb814989b48332.1484045952.git.vpalatin@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Useful to send guest data back to QEMU.
Changes from Laszlo Ersek <lersek@redhat.com>:
- rebase the patch from Michael Tsirkin's original postings at [1] and [2]
to the following patches:
- loader: Allow a custom AddressSpace when loading ROMs
- loader: Add AddressSpace loading support to uImages
- loader: fix handling of custom address spaces when adding ROM blobs
- reject such writes immediately that would exceed the end of the array,
rather than performing a partial write before setting the error bit: see
the (len != dma.length) condition
- document the write interface
[1] http://lists.nongnu.org/archive/html/qemu-devel/2016-02/msg04968.html
[2] http://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg02735.html
Cc: "Gabriel L. Somlo" <somlo@cmu.edu>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: qemu-arm@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
