We need to implement .bdrv_has_zero_init_truncate() for every block
driver that supports truncation and has a .bdrv_has_zero_init()
implementation.
Implement it the same way each driver implements .bdrv_has_zero_init().
This is at least not any more unsafe than what we had before.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-5-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
No .bdrv_has_zero_init() implementation returns 1 if growing the file
would add non-zero areas (at least with PREALLOC_MODE_OFF), so using it
in lieu of this new function was always safe.
But on the other hand, it is possible that growing an image that is not
zero-initialized would still add a zero-initialized area, like when
using nonpreallocating truncation on a preallocated image. For callers
that care only about truncation, not about creation with potential
preallocation, this new function is useful.
Alternatively, we could have added a PreallocMode parameter to
bdrv_has_zero_init(). But the only user would have been qemu-img
convert, which does not have a plain PreallocMode value right now -- it
would have to parse the creation option to obtain it. Therefore, the
simpler solution is to let bdrv_has_zero_init() inquire the
preallocation status and add the new bdrv_has_zero_init_truncate() that
presupposes PREALLOC_MODE_OFF.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-4-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_has_zero_init() only has meaning for newly created images or image
areas. If the mirror job itself did not create the image, it cannot
rely on bdrv_has_zero_init()'s result to carry any meaning.
This is the case for drive-mirror with mode=existing and always for
blockdev-mirror.
Note that we only have to zero-initialize the target with sync=full,
because other modes actually do not promise that the target will contain
the same data as the source after the job -- sync=top only promises to
copy anything allocated in the top layer, and sync=none will only copy
new I/O. (Which is how mirror has always handled it.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-3-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_has_zero_init() only has meaning for newly created images or image
areas. If qemu-img convert did not create the image itself, it cannot
rely on bdrv_has_zero_init()'s result to carry any meaning.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-2-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Stable notes: patches one and two can be considered
for the next -stable release.
-----BEGIN PGP SIGNATURE-----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=0oP2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging
Pull request
Stable notes: patches one and two can be considered
for the next -stable release.
# gpg: Signature made Sat 17 Aug 2019 00:15:50 BST
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jnsnow/tags/ide-pull-request:
hw/ide/atapi: Use the ldst API
Revert "ide/ahci: Check for -ECANCELED in aio callbacks"
dma-helpers: ensure AIO callback is invoked after cancellation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rebase notes:
011/36:[0003] [FC] 'block/backup: upgrade copy_bitmap to BdrvDirtyBitmap'
016/36:[----] [-C] 'iotests: Add virtio-scsi device helper'
017/36:[0002] [FC] 'iotests: add test 257 for bitmap-mode backups'
030/36:[0011] [FC] 'block/backup: teach TOP to never copy unallocated regions'
032/36:[0018] [FC] 'iotests/257: test traditional sync modes'
11: A new hbitmap call was added late in 4.1, changed to
bdrv_dirty_bitmap_next_zero.
16: Context-only (self.has_quit is new context in 040)
17: Removed 'auto' to follow upstream trends in iotest fashion
30: Handled explicitly on-list with R-B from Max.
32: Fix capitalization in test, as mentioned on-list.
-----BEGIN PGP SIGNATURE-----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=4WRP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into staging
Pull request
Rebase notes:
011/36:[0003] [FC] 'block/backup: upgrade copy_bitmap to BdrvDirtyBitmap'
016/36:[----] [-C] 'iotests: Add virtio-scsi device helper'
017/36:[0002] [FC] 'iotests: add test 257 for bitmap-mode backups'
030/36:[0011] [FC] 'block/backup: teach TOP to never copy unallocated regions'
032/36:[0018] [FC] 'iotests/257: test traditional sync modes'
11: A new hbitmap call was added late in 4.1, changed to
bdrv_dirty_bitmap_next_zero.
16: Context-only (self.has_quit is new context in 040)
17: Removed 'auto' to follow upstream trends in iotest fashion
30: Handled explicitly on-list with R-B from Max.
32: Fix capitalization in test, as mentioned on-list.
# gpg: Signature made Sat 17 Aug 2019 00:12:13 BST
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jnsnow/tags/bitmaps-pull-request: (36 commits)
tests/test-hbitmap: test next_zero and _next_dirty_area after truncate
block/backup: refactor write_flags
block/backup: deal with zero detection
qapi: add dirty-bitmaps to query-named-block-nodes result
iotests/257: test traditional sync modes
block/backup: support bitmap sync modes for non-bitmap backups
block/backup: teach TOP to never copy unallocated regions
block/backup: add backup_is_cluster_allocated
block/backup: centralize copy_bitmap initialization
block/backup: improve sync=bitmap work estimates
iotests/257: test API failures
block/backup: hoist bitmap check into QMP interface
iotests/257: Refactor backup helpers
iotests/257: add EmulatedBitmap class
iotests/257: add Pattern class
iotests: test bitmap moving inside 254
qapi: implement block-dirty-bitmap-remove transaction action
blockdev: reduce aio_context locked sections in bitmap add/remove
block/backup: loosen restriction on readonly bitmaps
iotests: add test 257 for bitmap-mode backups
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since most iotests are now run during "make check" already, we do not
need to test them explicitly from the gitlab-ci.yml script anymore.
And while we're at it, add some of the new non-auto tests >= 246 instead.
Message-Id: <20190717111947.30356-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
People often forget to run the iotests before submitting patches or pull
requests - this is likely due to the fact that we do not run the tests
during our mandatory "make check" tests yet. Now that we've got a proper
"auto" group of iotests that should be fine to run in every environment,
we can enable the iotests during "make check" again by running the "auto"
tests by default from the check-block.sh script.
Some cases still need to be checked first, though: iotests need bash and
GNU sed (otherwise they fail), and if gprof is enabled, it spoils the
output of some test cases causing them to fail. So if we detect that one
of the required programs is missing or that gprof is enabled, we still
have to skip the iotests to avoid failures.
And finally, since we are using check-block.sh now again, this patch also
removes the qemu-iotests-quick.sh script since we do not need that anymore
(and having two shell wrapper scripts around the block tests seems rather
confusing than helpful).
Message-Id: <20190717111947.30356-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
[AJB: -makecheck to check-block.sh, move check-block to start and gate it]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Opening a block device on NetBSD has an additional step compared to other OSes,
corresponding to raw_normalize_devicepath. The error message in that function
is slightly different from that in raw_open_common and this was causing spurious
failures in qemu-iotests. However, in general it is not important to know what
exact step was failing, for example in the qemu-iotests case the error message
contains the fairly unequivocal "No such file or directory" text from strerror.
We can thus fix the failures by standardizing on a single error message for
both raw_open_common and raw_normalize_devicepath; in fact, we can even
use error_setg_file_open to make sure the error message is the same as in
the rest of QEMU.
Message-Id: <20190725095920.28419-1-pbonzini@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The big-endian load/store functions are already provided
by "qemu/bswap.h".
Avoid code duplication, use the generic API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190808130454.9930-1-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This reverts commit 0d910cfeaf.
It's not correct to just ignore an error code in a callback; we need to
handle that error and possible report failure to the guest so that they
don't wait indefinitely for an operation that will now never finish.
This ought to help cases reported by Nutanix where iSCSI returns a
legitimate -ECANCELED for certain operations which should be propagated
normally.
Reported-by: Shaju Abraham <shaju.abraham@nutanix.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190729223605.7163-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
dma_aio_cancel unschedules the BH if there is one, which corresponds
to the reschedule_dma case of dma_blk_cb. This can stall the DMA
permanently, because dma_complete will never get invoked and therefore
nobody will ever invoke the original AIO callback in dbs->common.cb.
Fix this by invoking the callback (which is ensured to happen after
a bdrv_aio_cancel_async, or done manually in the dbs->bh case), and
add assertions to check that the DMA state machine is indeed waiting
for dma_complete or reschedule_dma, but never both.
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20190729213416.1972-1-pbonzini@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Test that hbitmap_next_zero and hbitmap_next_dirty_area can find things
after old bitmap end.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190805164652.42409-1-vsementsov@virtuozzo.com
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
write flags are constant, let's store it in BackupBlockJob instead of
recalculating. It also makes two boolean fields to be unused, so,
drop them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190730163251.755248-4-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
We have detect_zeroes option, so at least for blockdev-backup user
should define it if zero-detection is needed. For drive-backup leave
detection enabled by default but do it through existing option instead
of open-coding.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190730163251.755248-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Let's add a possibility to query dirty-bitmaps not only on root nodes.
It is useful when dealing both with snapshots and incremental backups.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190717173937.18747-1-jsnow@redhat.com
[Added deprecation information. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
[Fixed spelling --js]
Accept bitmaps and sync policies for the other backup modes.
This allows us to do things like create a bitmap synced to a full backup
without a transaction, or start a resumable backup process.
Some combinations don't make sense, though:
- NEVER policy combined with any non-BITMAP mode doesn't do anything,
because the bitmap isn't used for input or output.
It's harmless, but is almost certainly never what the user wanted.
- sync=NONE is more questionable. It can't use on-success because this
job never completes with success anyway, and the resulting artifact
of 'always' is suspect: because we start with a full bitmap and only
copy out segments that get written to, the final output bitmap will
always be ... a fully set bitmap.
Maybe there's contexts in which bitmaps make sense for sync=none,
but not without more severe changes to the current job, and omitting
it here doesn't prevent us from adding it later.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Presently, If sync=TOP is selected, we mark the entire bitmap as dirty.
In the write notifier handler, we dutifully copy out such regions.
Fix this in three parts:
1. Mark the bitmap as being initialized before the first yield.
2. After the first yield but before the backup loop, interrogate the
allocation status asynchronously and initialize the bitmap.
3. Teach the write notifier to interrogate allocation status if it is
invoked during bitmap initialization.
As an effect of this patch, the job progress for TOP backups
now behaves like this:
- total progress starts at bdrv_length.
- As allocation status is interrogated, total progress decreases.
- As blocks are copied, current progress increases.
Taken together, the floor and ceiling move to meet each other.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190716000117.25219-10-jsnow@redhat.com
[Remove ret = -ECANCELED change. --js]
[Squash in conflict resolution based on Max's patch --js]
Message-id: c8b0ab36-79c8-0b4b-3193-4e12ed8c848b@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Modify bdrv_is_unallocated_range to utilize the pnum return from
bdrv_is_allocated, and in the process change the semantics from
"is unallocated" to "is allocated."
Optionally returns a full number of clusters that share the same
allocation status.
This will be used to carefully toggle bits in the bitmap for sync=top
initialization in the following commits.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Just a few housekeeping changes that keeps the following commit easier
to read; perform the initial copy_bitmap initialization in one place.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
When making backups based on bitmaps, the work estimate can be more
accurate. Update iotests to reflect the new strategy.
TOP work estimates are broken, but do not get worse with this commit.
That issue is addressed in the following commits instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This is nicer to do in the unified QMP interface that we have now,
because it lets us use the right terminology back at the user.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This test needs support for non-bitmap backups and missing or
unspecified bitmap sync modes, so rewrite the helpers to be a little
more generic.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Represent a bitmap with an object that we can mark and clear bits in.
This makes it easier to manage partial writes when we don't write a
full group's worth of patterns before an error.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Just kidding, this is easier to manage with a full class instead of a
namedtuple.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Test persistent bitmap copying with and without removal of original
bitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-4-jsnow@redhat.com
[Edited comment "bitmap1" --> "bitmap2" as per review. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
It is used to do transactional movement of the bitmap (which is
possible in conjunction with merge command). Transactional bitmap
movement is needed in scenarios with external snapshot, when we don't
want to leave copy of the bitmap in the base image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-3-jsnow@redhat.com
[Edited "since" version to 4.2 --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Commit 0a6c86d024 returned these locks back to add/remove
functionality, to protect from intersection of persistent bitmap
related IO with other IO. But other bitmap-related functions called
here are unrelated to the problem, and there are no needs to keep these
calls inside critical sections.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
With the "never" sync policy, we actually can utilize readonly bitmaps
now. Loosen the check at the QMP level, and tighten it based on
provided arguments down at the job creation level instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-19-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-18-jsnow@redhat.com
[Removed 'auto' group, as per new testing config guidelines --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Seems that it comes up enough.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-17-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Use "FilePaths" instead of "FilePath" to request multiple files be
cleaned up after we leave that object's scope.
This is not crucial; but it saves a little typing.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
run_job can cancel pending jobs to simulate failure. This lets us use
the pending callback to issue test commands while the job is open, but
then still have the job fail in the end.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-15-jsnow@redhat.com
[Maintainer edit: Merge conflict resolution in run_job]
Signed-off-by: John Snow <jsnow@redhat.com>
Because the new-style python tests don't use the iotests.main() test
launcher, we don't turn on the debugger logging for these scripts
when invoked via ./check -d.
Refactor the launcher shim into new and old style shims so that they
share environmental configuration.
Two cleanup notes: debug was not actually used as a global, and there
was no reason to create a class in an inner scope just to achieve
default variables; we can simply create an instance of the runner with
the values we want instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-14-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This adds an "always" policy for bitmap synchronization. Regardless of if
the job succeeds or fails, the bitmap is *always* synchronized. This means
that for backups that fail part-way through, the bitmap retains a record of
which sectors need to be copied out to accomplish a new backup using the
old, partial result.
In effect, this allows us to "resume" a failed backup; however the new backup
will be from the new point in time, so it isn't a "resume" as much as it is
an "incremental retry." This can be useful in the case of extremely large
backups that fail considerably through the operation and we'd like to not waste
the work that was already performed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This simplifies some interface matters; namely the initialization and
(later) merging the manifest back into the sync_bitmap if it was
provided.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-12-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add a public interface for get. While we're at it,
rename "bdrv_get_dirty_bitmap_locked" to "bdrv_dirty_bitmap_get_locked".
(There are more functions to rename to the bdrv_dirty_bitmap_VERB form,
but they will wait until the conclusion of this series.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
I'm surprised it didn't come up sooner, but sometimes we have a +busy
bitmap as a source. This is dangerous from the QMP API, but if we are
the owner that marked the bitmap busy, it's safe to merge it using it as
a read only source.
It is not safe in the general case to allow users to read from in-use
bitmaps, so create an internal variant that foregoes the safety
checking.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Nobody calls the function like this currently, but we neither prohibit
or cope with this behavior. I decided to make the function cope with it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This adds a "never" policy for bitmap synchronization. Regardless of if
the job succeeds or fails, we never update the bitmap. This can be used
to perform differential backups, or simply to avoid the job modifying a
bitmap.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We don't need or want a new sync mode for simple differences in
semantics. Create a new mode simply named "BITMAP" that is designed to
make use of the new Bitmap Sync Mode field.
Because the only bitmap sync mode is 'on-success', this adds no new
functionality to the backup job (yet). The old incremental backup mode
is maintained as a syntactic sugar for sync=bitmap, mode=on-success.
Add all of the plumbing necessary to support this new instruction.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Depending on what a user is trying to accomplish, there might be a few
bitmap cleanup actions that occur when an operation is finished that
could be useful.
I am proposing three:
- NEVER: The bitmap is never synchronized against what was copied.
- ALWAYS: The bitmap is always synchronized, even on failures.
- ON-SUCCESS: The bitmap is synchronized only on success.
The existing incremental backup modes use 'on-success' semantics,
so add just that one for right now.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190709232550.10724-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Create a common core that comprises the actual meat of what the backup API
boundary needs to do, and then switch drive-backup to use it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
drive-backup and blockdev-backup have an awful lot of things in common
that are the same. Let's fix that.
I don't deduplicate 'target', because the semantics actually did change
between each structure. Leave that one alone so it can be documented
separately.
Where documentation was not identical, use the most up-to-date version.
For "speed", use Blockdev-Backup's version. For "sync", use
Drive-Backup's version.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
[Maintainer edit: modified commit message. --js]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190709232550.10724-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>