Commit Graph

270 Commits

Author SHA1 Message Date
Markus Armbruster
1d649244b3 ivshmem: Rename property memdev to x-memdev for 2.5
The device's guest interface and its QEMU user interface are
flawed^Whotly debated.  We'll resolve that in the next development
cycle, probably by deprecating the device in favour of a cleaned up,
but not quite compatible revision.

To avoid adding more baggage to the soon-to-be-deprecated interface,
mark property "memdev" as experimental, by renaming it to "x-memdev".
It's the only recent user interface change.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448384789-14830-6-git-send-email-armbru@redhat.com>
[Update of qemu-doc.texi squashed in]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2015-11-25 10:24:27 +01:00
Markus Armbruster
2825717c02 ivshmem: Mark questionable socket type test FIXME
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2015-11-25 10:24:15 +01:00
Guenter Roeck
74fcbd22d2 hw/misc: Add support for ADC controller in Xilinx Zynq 7000
Add support for the Xilinx XADC core used in Zynq 7000.

References:
- Zynq-7000 All Programmable SoC Technical Reference Manual
- 7 Series FPGAs and Zynq-7000 All Programmable SoC XADC
  Dual 12-Bit 1 MSPS Analog-to-Digital Converter

Tested with Linux using QEMU machine xilinx-zynq-a9 with devicetree
files zynq-zc702.dtb and zynq-zc706.dtb, and kernel configuration
multi_v7_defconfig.

Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ PC changes:
  * Changed macro names to match TRM where possible
  * Made programmers model macro scheme consistent
  * Dropped XADC_ZYNQ_ prefix on local macros
  * Fix ALM field width
  * Update threshold-comparison interrupts in _update_ints()
  * factored out DFIFO pushes into helper. Renamed to "push/pop"
  * Changed xadc_reg to 10 bits and added OOB check.
  * Reduced scope of MCTL reset to just stop channel coms.
  * Added dummy read data to write commands
  * Changed _ to - seperators in string names and filenames
  * Dropped ------------ in header comment
  * Catchall'ed _update_ints() in _write handler.
  * Minor whitespace changes.
  * Use ZYNQ_XADC_FIFO_DEPTH instead of ARRAY_SIZE()
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-12 21:30:42 +00:00
Mark Cave-Ayland
cffc331a31 cuda.c: add delay to setting of SR_INT bit
MacOS 9 is racy when it comes to accessing the shift register. Fix this by
introducing a small delay between data accesses and raising the SR_INT
interrupt bit.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:55 +11:00
Mark Cave-Ayland
a53cfdcca2 cuda.c: fix T2 timer and enable its interrupt
Fix the counter loading logic and enable the T2 interrupt when the timer
expires. Otherwise MacOS 9 hangs on boot.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:55 +11:00
Mark Cave-Ayland
0174adb611 cuda.c: rename get_counter() state variable from s to ti for consistency
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:55 +11:00
Mark Cave-Ayland
eda14abbb8 cuda.c: refactor get_tb() so that the time can be passed in
This is in preparation for sharing the code between timers.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:55 +11:00
Mark Cave-Ayland
b5ac04103b cuda.c: add defines for CUDA registers
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:55 +11:00
Mark Cave-Ayland
d271ae36dc cuda.c: fix CUDA SR interrupt clearing
Make sure that we also clear the data and clock interrupts at the same time.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:55 +11:00
Mark Cave-Ayland
ce8d3b647b cuda.c: implement dummy IIC access commands
These are used by MacOS 9 on boot. Here we return an error except for 4-byte
commands which write to the IIC bus in a similar manner to MOL.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:54 +11:00
Mark Cave-Ayland
f1f46f74a9 cuda.c: implement simple CUDA_GET_6805_ADDR command
This simply returns an empty response with no error status as implemented by
MOL to allow MacOS 9 boot to proceed further.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:54 +11:00
Mark Cave-Ayland
4202e63c04 cuda.c: fix CUDA_PACKET response packet format
According to comments in MOL, the response to a CUDA_PACKET should be one of
the following:

Reply: (CUDA_PACKET, status, cmd)
Error: (ERROR_PACKET, status, CUDA_PACKET, cmd)

Update cuda_receive_packet() accordingly to reflect this in order to make
MacOS 9 happy.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:54 +11:00
Mark Cave-Ayland
6729aa4013 cuda.c: fix CUDA ADB error packet format
According to MOL, ADB error packets should be of the form (type, status, cmd)
rather than just (type, status). This fixes ADB device detection under MacOS 9.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:54 +11:00
Jean-Christophe Dubois
4a6aa0af85 i.MX: Standardize i.MX CCM debug
The goal is to have debug code always compiled during build.

We standardize all debug output on the following format:

[QOM_TYPE_NAME]reporting_function: debug message

The qemu_log_mask() output is following the same format as the
above debug.

Adding some missing qemu_log_mask call for bad registers.

Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 293e08f31cbb4df84d58f693243e61e770c73b3a.1445781957.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 15:59:46 +00:00
Marc-André Lureau
f7a199b2b4 ivshmem: use little-endian int64_t for the protocol
The current ivshmem protocol uses 'long' for integers. But the
sizeof(long) depends on the host and the endianess is not defined, which
may cause portability troubles.

Instead, switch to using little-endian int64_t. This breaks the
protocol, except on x64 little-endian host where this change
should be compatible.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-26 10:19:53 +01:00
Marc-André Lureau
660c97eef6 ivshmem: use kvm irqfd for msi notifications
Use irqfd for improving context switch when notifying the guest.
If the host doesn't support kvm irqfd, regular msi notifications are
still supported.

Note: the ivshmem implementation doesn't allow switching between MSI and
IO interrupts, this patch doesn't either.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-26 10:19:53 +01:00
Marc-André Lureau
0f57350e5c ivshmem: rename MSI eventfd_table
The array is used to have vector specific data, so use a more
descriptive name.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-26 10:19:53 +01:00
Marc-André Lureau
d160f3f791 ivshmem: remove EventfdEntry.vector
No need to store an extra int for the vector number when it can be
computed easily by looking at the position in the array.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-26 10:19:53 +01:00
Marc-André Lureau
d9453c93fe ivshmem: add hostmem backend
Instead of handling allocation, teach ivshmem to use a memory backend.
This allows to use hugetlbfs backed memory now.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-26 10:19:53 +01:00
Marc-André Lureau
2c04752cc8 ivshmem: use qemu_strtosz()
Use the common qemu utility function to parse the memory size.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-26 10:19:53 +01:00
Marc-André Lureau
f689d2811a ivshmem: do not keep shm_fd open
Remove shm_fd from device state, closing it as early as possible to avoid leaks.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-26 10:19:53 +01:00
David Marchand
5105b1d8c2 ivshmem: add check on protocol version in QEMU
Send a protocol version as the first message from server, clients must
close communication if they don't support this protocol version.  Older
QEMUs should be fine with this change in the protocol since they
overrides their own vm_id on reception of an id associated to no
eventfd.

Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[use fifo_update_and_get()]
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:03:18 +02:00
Marc-André Lureau
972ad21553 ivshmem: reset mask on device reset
The interrupt mask is a state value, it should be reset, like the
interrupt status.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
1ee57de444 ivshmem: error on too many eventfd received
The number of eventfd that can be handled per peer is limited by the
number of vectors. Return an error when receiving too many of them.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
f456179fae ivshmem: replace 'guest' for 'peer' appropriately
The terms 'guest' and 'peer' are used sometime interchangeably which may
be confusing. Instead, use 'peer' for the remote instances of ivshmem
clients, and 'guest' for the local VM.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
f64a078d45 ivshmem: fix pci_ivshmem_exit()
Free all objects owned by the device, making sure the device is free,
fixing hot-unplug.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
d383537d01 ivshmem: add device description
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
945001a1af ivshmem: check shm isn't already initialized
The server should not change the shm, and this isn't handled by qemu and
we should should verify this in qemu.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
86d471bfa4 ivshmem: shmfd can be 0
0 is a valid fd value, so change conditions and set -1 value early

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
1f8552df2c ivshmem: migrate with VMStateDescription
load_state_old() is used to keep compatibility with version 0.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
e309366337 ivshmem: use common is_power_of_2()
The common version correctly checks for 0 value case.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
6f8a16d55d ivshmem: use common return
Both if branches return, move this out to common end.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
9a2f0e64ae ivshmem: simplify a bit the code
Use some more explicit variables to simplify the code.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
ffa99afd6e ivshmem: print error on invalid peer id
The server shouldn't send invalid peer id, so print an error if it's the
case.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
36617792b4 ivshmem: improve error handling
The test whether the chardev is an AF_UNIX socket rejects
"-chardev socket,id=chr0,path=/tmp/foo,server,nowait -device
ivshmem,chardev=chr0", but fails to explain why.

Use an explicit error on why a chardev may be rejected.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
f59bb37898 ivshmem: improve debug messages
Some misc improvements to ivshmem debug.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
95c8425cc3 ivshmem: remove max_peer field
max_peer isn't really useful, it tracks the maximum received VM id, but
that quickly matches nb_peers, the size of the peers array. Since VM
come and go, there might be sparse peers so it doesn't help much in
general to have this value around.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
95e7c8a0f6 ivshmem: initialize max_peer to -1
There is no peer when device is initialized, do not let doorbell for
inexisting peer 0.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
d8a5da075a ivshmem: remove useless ivshmem_update_irq() val argument
val isn't used in ivshmem_update_irq() function.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
81e507f0bc ivshmem: allocate eventfds in resize_peers()
It simplifies a bit the code to allocate the array when setting the
number of peers instead of lazily when receiving the first vector.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
1300b2733a ivshmem: simplify around increase_dynamic_storage()
Set the number of peers and array allocation in a single place. Rename
to better reflect the function content.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
61ea2d8648 ivshmem: limit maximum number of peers to G_MAXUINT16
Limit the maximum number of peers to MAXUINT16. This is more realistic
and better matches the limit of the doorbell register.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
03977ad552 ivshmem: remove last exit(1)
Failing to create a chardev shouldn't be fatal.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
d58d7e848e ivshmem: more qdev conversion
Use the latest qemu device modeling API, in particular, convert to
realize to fix the error handling; right now a botched device_add
ivhsmem command kills the VM.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
49b2951f84 ivshmem: remove useless doorbell field
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
9113e3f394 ivshmem: remove superflous ivshmem_attr field
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
dee2151e72 ivshmem: remove unnecessary dup()
qemu_chr_fe_get_msgfd() transfers ownership, there is no need to dup the
fd.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
0f14fd71c1 ivshmem: factor out the incoming fifo handling
Make a new function fifo_update_and_get() that can be reused by other
functions (in next commits).

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
951dada665 ivshmem: fix number of bytes to push to fifo
If the fifo has 0 bytes, and the read is of size 1, the call to
fifo8_push_all() will copy off boundary data.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
b8ab854b27 ivhsmem: read do not accept more than sizeof(long)
ivshmem_read() only reads sizeof(long) from the input buffer.  Accepting
more could lead to fifo8 abort() on 32bit systems if fifo is not empty.

A following patch will change the protocol to 64-bit little-endian
instead.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00