Commit Graph

1171 Commits

Author SHA1 Message Date
Markus Armbruster
4f953d2fc8 smbios: Convert to QemuOpts
So that it can be set in config file for -readconfig.

This tightens parsing of -smbios, and makes it more consistent with
other options: unknown parameters are rejected, numbers with trailing
junk are rejected, when a parameter is given multiple times, last
rather than first wins, ...

MST: drop one chunk to fix build errors

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-28 23:49:06 +03:00
Markus Armbruster
351a6a73ca smbios: Normalize smbios_entry_add()'s error handling to exit(1)
It exits on all error conditions but one, where it returns -1.
Normalize, and return void.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-28 22:40:58 +03:00
Stefan Weil
6aa25b4a7b bitops: Add rotate functions (rol8, ror8, ...)
These functions were copies from include/linux/bitopts.h.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2013-09-25 21:22:33 +02:00
Liu, Jinsong
4bc78a8772 qemu: Adjust qemu wakeup
Currently Xen hvm s3 has a bug coming from the difference between
qemu-traditioanl and qemu-xen. For qemu-traditional, the way to
resume from hvm s3 is via 'xl trigger' command. However, for
qemu-xen, the way to resume from hvm s3 inherited from standard
qemu, i.e. via QMP, and it doesn't work under Xen.

The root cause is, for qemu-xen, 'xl trigger' command didn't reset
devices, while QMP didn't unpause hvm domain though they did qemu
system reset.

We have two qemu patches and one xl patch to fix Xen hvm s3 bug.
This patch is the qemu patch 1. It adjusts qemu wakeup so that
Xen s3 resume logic (which will be implemented at qemu patch 2)
will be notified after qemu system reset.

Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
2013-09-25 16:38:29 +00:00
Paolo Bonzini
619f90ba62 tcg-ppc: use new return-argument ld/st helpers
These use a 32-bit load-of-immediate to save a mflr+addi+mtlr sequence.
Tested with a Windows 98 guest (pretty much the most recent thing I
could run on my PPC machine) and kvm-unit-tests's sieve.flat.  The
speed up for sieve.flat is as high as 10% for qemu-system-i386, 25%
(no kidding) for qemu-system-x86_64 on my PowerBook G4.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-25 07:45:39 -07:00
Benoît Canet
5726d872f3 qdict: Extract qdict_extract_subqdict
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-25 16:21:28 +02:00
Benoît Canet
030be32184 block: introduce BlockDriver.bdrv_needs_filename to enable some drivers.
Some drivers will have driver specifics options but no filename.
This new bool allow the block layer to treat them correctly.

The .bdrv_needs_filename is set in drivers not having .bdrv_parse_filename and
not having .bdrv_open.

The first exception to this rule will be the quorum driver.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-25 16:21:28 +02:00
Alexey Kardashevskiy
7102400d40 migration: add version supporting macros for struct pointer
This adds version supporting macros VMSTATE_STRUCT_POINTER_TEST_V
and VMSTATE_STRUCT_POINTER_V in addition to the already existing
VMSTATE_STRUCT_POINTER and VMSTATE_STRUCT_POINTER_TEST macros.

Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-09-24 13:22:50 +02:00
Anthony Liguori
16121fa39e Merge remote-tracking branch 'stefanha/block' into staging
# By Stefan Hajnoczi (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
  virtio-blk: do not relay a previous driver's WCE configuration to the current
  blockdev: do not default cache.no-flush to true
  block: don't lose data from last incomplete sector
  qcow2: Correct snapshots size for overlap check
  coroutine: fix /perf/nesting coroutine benchmark
  coroutine: add qemu_coroutine_yield benchmark
  qemu-timer: do not take the lock in timer_pending
  qemu-timer: make qemu_timer_mod_ns() and qemu_timer_del() thread-safe
  qemu-timer: drop outdated signal safety comments
  osdep: warn if open(O_DIRECT) on fails with EINVAL
  libcacard: link against qemu-error.o for error_report()

Message-id: 1379698931-946-1-git-send-email-stefanha@redhat.com
2013-09-23 11:53:05 -05:00
Anthony Liguori
2e6ae666c8 Merge remote-tracking branch 'mjt/trivial-patches' into staging
# By Stefan Weil (8) and others
# Via Michael Tokarev
* mjt/trivial-patches:
  tests/.gitignore: ignore test-throttle
  exec: Fix broken build for MinGW (regression)
  kvm: Fix compiler warning (clang)
  tcg-sparc: Fix parenthesis warning
  Makefile: Remove some more files when cleaning
  target-i386: Fix segment cache dump
  iov: avoid "orig_len may be used unitialized" warning
  vscclient: remove unnecessary use of uninitialized variable
  trace-events: Clean up with scripts/cleanup-trace-events.pl again
  tci: Fix qemu-alpha on 32 bit hosts (wrong assertions)
  *-user: Improve documentation for lock_user function
  MAINTAINERS: Add missing entry to filelist for TCI target
  translate-all: Fix formatting of dump output
  *-user: Fix typo in comment (ulocking -> unlocking)
  docs: Fix IO port number for CPU present bitmap.
  q35: Fix typo in constant DEFUALT -> DEFAULT.
  configure: Undefine _FORTIFY_SOURCE prior using it

Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
2013-09-23 11:52:55 -05:00
Anthony Liguori
3e4be9c297 Merge remote-tracking branch 'qemu-kvm/uq/master' into staging
# By Alexey Kardashevskiy (3) and others
# Via Paolo Bonzini
* qemu-kvm/uq/master:
  target-i386: add feature kvm_pv_unhalt
  linux-headers: update to 3.12-rc1
  target-i386: forward CPUID cache leaves when -cpu host is used
  linux-headers: update to 3.11
  kvm: fix traces to use %x instead of %d
  kvmvapic: Clear also physical ROM address when entering INACTIVE state
  kvmvapic: Enter inactive state on hardware reset
  kvmvapic: Catch invalid ROM size
  kvm irqfd: support direct msimessage to irq translation
  fix steal time MSR vmsd callback to proper opaque type
  kvm: warn if num cpus is greater than num recommended
  cpu: Move cpu state syncs up into cpu_dump_state()
  exec: always use MADV_DONTFORK

Message-id: 1379694292-1601-1-git-send-email-pbonzini@redhat.com
2013-09-23 11:52:49 -05:00
Anthony Liguori
f3ca508f00 Merge remote-tracking branch 'bonzini/scsi-next' into staging
# By Hervé Poussineau (5) and Stefan Weil (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
  block/iscsi: Drop iscsi_co_get_block_status for older versions of libiscsi
  lsi: add 53C810 variant
  lsi: remove todo
  lsi: ignore write accesses to CTEST0 registers
  lsi: check ssid versus sdid only if ssid is valid
  lsi: use constant name instead of its value
2013-09-23 11:52:32 -05:00
Paolo Bonzini
ef5bc96268 virtio-blk: do not relay a previous driver's WCE configuration to the current
The following sequence happens:
- the SeaBIOS virtio-blk driver does not support the WCE feature, which
causes QEMU to disable writeback caching

- the Linux virtio-blk driver resets the device, finds WCE is available
but writeback caching is disabled; tells block layer to not send cache
flush commands

- the Linux virtio-blk driver sets the DRIVER_OK bit, which causes
writeback caching to be re-enabled, but the Linux virtio-blk driver does
not know of this side effect and cache flushes remain disabled

The bug is at the third step.  If the guest does know about CONFIG_WCE,
QEMU should ignore the WCE feature's state.  The guest will control the
cache mode solely using configuration space.  This change makes Linux
do flushes correctly, but Linux will keep SeaBIOS's writethrough mode.

Hence, whenever the guest is reset, the cache mode of the disk should
be reset to whatever was specified in the "-drive" option.  With this
change, the Linux virtio-blk driver finds that writeback caching is
enabled, and tells the block layer to send cache flush commands
appropriately.

Reported-by: Rusty Russell <rusty@au1.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-20 19:27:48 +02:00
Richard W.M. Jones
451f7846ec q35: Fix typo in constant DEFUALT -> DEFAULT.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-20 20:09:23 +04:00
Heinz Graalfs
6a444f8507 s390/sclplmconsole: Add support for SCLP line-mode console
Add simple support for SCLP line-mode also known as operating
system messages. This can be added in addition to or instead of
the SCLP full screen console with -device sclplmconsole.

Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-09-20 13:55:30 +02:00
Heinz Graalfs
40fa5264f6 s390/ebcdic: Move conversion tables to header file
Move conversion tables to header file.
   - In SCLP line mode processing EBCDIC/ASCII conversion is needed.
   - An additional EBCDIC to ASCII conversion function is added.

Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-09-20 13:55:30 +02:00
Christian Borntraeger
c3d9f24a39 s390/eventfacility: allow childs to handle more than 1 event type
Currently all handlers (quiesce, console) only handle one event type.
Some drivers will handle multiple (compatible) event types. Rework the
code accordingly.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2013-09-20 13:55:30 +02:00
Christian Borntraeger
8b8b1138df s390/eventfacility: remove unused event_type variable
The event_type variable is never used. Get rid of it.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2013-09-20 13:55:30 +02:00
Christian Borntraeger
788be8e9d6 s390/eventfacility: Fix receive/send masks
Currently we announce interchanged receive/send masks. This did not
trigger a bug, since the sclp console has the same masks for
send/receive and the Linux guest does not check the sclp mask for simple
events like quiesce. With other event users like the sclp line mode
console, we will have different send/receive bits. Fix it.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2013-09-20 13:55:30 +02:00
Alexey Kardashevskiy
76fe21deda kvm irqfd: support direct msimessage to irq translation
On PPC64 systems MSI Messages are translated to system IRQ in a PCI
host bridge. This is already supported for emulated MSI/MSIX but
not for irqfd where the current QEMU allocates IRQ numbers from
irqchip and maps MSIMessages to IRQ in the host kernel.

This adds a new direct mapping flag which tells
the kvm_irqchip_add_msi_route() function that a new VIRQ
should not be allocated, instead the value from MSIMessage::data
should be used. It is up to the platform code to make sure that
this contains a valid IRQ number as sPAPR does in spapr_pci.c.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-20 12:37:52 +02:00
James Hogan
97577fd4c3 cpu: Move cpu state syncs up into cpu_dump_state()
The x86 and ppc targets call cpu_synchronize_state() from their
*_cpu_dump_state() callbacks to ensure that up to date state is dumped
when KVM is enabled (for example when a KVM internal error occurs).

Move this call up into the generic cpu_dump_state() function so that
other KVM targets (namely MIPS) can take advantage of it.

This requires kvm_cpu_synchronize_state() and cpu_synchronize_state() to
be moved out of the #ifdef NEED_CPU_H in <sysemu/kvm.h> so that they're
accessible to qom/cpu.c.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: qemu-ppc@nongnu.org
Cc: kvm@vger.kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-09-20 12:37:52 +02:00
Stefan Hajnoczi
978f2205c7 qemu-timer: make qemu_timer_mod_ns() and qemu_timer_del() thread-safe
Introduce QEMUTimerList->active_timers_lock to protect the linked list
of active timers.  This allows qemu_timer_mod_ns() to be called from any
thread.

Note that vm_clock is not thread-safe and its use of
qemu_clock_has_timers() works fine today but is also not thread-safe.

The purpose of this patch is to eventually let device models set or
cancel timers from a vcpu thread without holding the global mutex.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-18 15:48:33 +02:00
Anthony Liguori
5dc11192b2 Merge remote-tracking branch 'kwolf/for-anthony' into staging
# By Max Reitz (16) and others
# Via Kevin Wolf
* kwolf/for-anthony: (33 commits)
  qemu-iotests: Fix test 038
  block: Assert validity of BdrvActionOps
  qemu-iotests: Cleanup test image in test number 007
  qemu-img: fix invalid JSON
  coroutine: add ./configure --disable-coroutine-pool
  qemu-iotests: Adjustments due to error propagation
  qcow2: Use Error parameter
  qemu-img create: Emit filename on error
  block: Error parameter for create functions
  block: Error parameter for open functions
  bdrv: Use "Error" for creating images
  bdrv: Use "Error" for opening images
  qemu-iotests: add 057 internal snapshot for block device test case
  hmp: add interface hmp_snapshot_delete_blkdev_internal
  hmp: add interface hmp_snapshot_blkdev_internal
  qmp: add interface blockdev-snapshot-delete-internal-sync
  qmp: add interface blockdev-snapshot-internal-sync
  qmp: add internal snapshot support in qmp_transaction
  snapshot: distinguish id and name in snapshot delete
  snapshot: new function bdrv_snapshot_find_by_id_and_name()
  ...

Message-id: 1379073063-14963-1-git-send-email-kwolf@redhat.com
2013-09-17 09:51:40 -05:00
Anthony Liguori
7d41364e71 Merge remote-tracking branch 'bonzini/scsi-next' into staging
# By Peter Lieven (3) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
  spapr-vscsi: Report error on unsupported MAD requests
  spapr-vscsi: Adding VSCSI capabilities
  iscsi: split discard requests in multiple parts
  iscsi: add .bdrv_get_block_status
  iscsi: add logical block provisioning information to iscsilun
  hw/scsi/lsi53c895a: Use deposit32 rather than handcoded shift/mask
  hw/scsi/lsi53c895a: Use sextract32 for sign-extension
  scsi: Fix scsi_bus_legacy_add_drive() scsi-generic with serial
  virtio-scsi: Make type virtio-scsi-common abstract
  spapr-vscsi: add task management
  scsi: prefer UUID to VM name for the initiator name

Message-id: 1378984634-765-1-git-send-email-pbonzini@redhat.com
2013-09-17 09:50:23 -05:00
Hervé Poussineau
ceae18bd74 lsi: add 53C810 variant
Currently, treat it exactly as a 53C895A.
53C895A is a 53C810 with more capabilities, so this should work.

However, this lets us test different code paths on Linux, which
don't use lastest features if it detect a 810, or on some OSes
which only support 810 and not 895A (like very old Windows NT
versions).

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-16 12:42:40 +02:00
Michael S. Tsirkin
4386406957 pci: add helper to retrieve the 64-bit range
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-15 11:49:50 +03:00
Michael S. Tsirkin
c5a22c4344 range: add min/max operations on ranges
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-15 11:49:50 +03:00
Michael S. Tsirkin
cfe25e2bca range: add Range to typedefs
will help simplify header dependencies.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-15 09:36:57 +03:00
Markus Armbruster
91138037cb exec: Simplify the guest physical memory allocation hook
Make it a generic hook rather than a KVM hook.  Less code and
ifdeffery.

Since the only user of the hook is old S390 KVM, there's hope we can
get rid of it some day.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Message-id: 1375276272-15988-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-12 11:45:31 -05:00
Markus Armbruster
3435f39513 exec: Reduce ifdeffery around -mem-path
Instead of spreading its ifdeffery everywhere, confine it to
qemu_ram_alloc_from_ptr().  Everywhere else, simply test block->fd,
which is non-negative exactly when block uses -mem-path.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Message-id: 1375276272-15988-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-12 11:45:31 -05:00
Max Reitz
cc84d90ff5 block: Error parameter for create functions
Add an Error ** parameter to bdrv_create and its associated functions to
allow more specific error messages.

Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12 10:12:48 +02:00
Max Reitz
34b5d2c68e block: Error parameter for open functions
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated
functions to allow more specific error messages.

Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12 10:12:48 +02:00
Max Reitz
d5124c00d8 bdrv: Use "Error" for creating images
Add an Error ** parameter to BlockDriver.bdrv_create to allow more
specific error messages.

Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12 10:12:48 +02:00
Max Reitz
015a1036a7 bdrv: Use "Error" for opening images
Add an Error ** parameter to BlockDriver.bdrv_open and
BlockDriver.bdrv_file_open to allow more specific error messages.

Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12 10:12:47 +02:00
Wenchao Xia
44e3e053af qmp: add interface blockdev-snapshot-delete-internal-sync
This interface use id and name as optional parameters, to handle the
case that one image contain multiple snapshots with same name which
may be '', but with different id.

Adding parameter id is for historical compatiability reason, and
that case is not possible in qemu's new interface for internal
snapshot at block device level, but still possible in qemu-img.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12 10:12:47 +02:00
Wenchao Xia
a89d89d3e6 snapshot: distinguish id and name in snapshot delete
Snapshot creation actually already distinguish id and name since it take
a structured parameter *sn, but delete can't. Later an accurate delete
is needed in qmp_transaction abort and blockdev-snapshot-delete-sync,
so change its prototype. Also *errp is added to tip error, but return
value is kepted to let caller check what kind of error happens. Existing
caller for it are savevm, delvm and qemu-img, they are not impacted by
introducing a new function bdrv_snapshot_delete_by_id_or_name(), which
check the return value and do the operation again.

Before this patch:
  For qcow2, it search id first then name to find the one to delete.
  For rbd, it search name.
  For sheepdog, it does nothing.

After this patch:
  For qcow2, logic is the same by call it twice in caller.
  For rbd, it always fails in delete with id, but still search for name
in second try, no change to user.

Some code for *errp is based on Pavel's patch.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12 10:12:47 +02:00
Wenchao Xia
2ea1dd758c snapshot: new function bdrv_snapshot_find_by_id_and_name()
To make it clear about id and name in searching, add this API
to distinguish them. Caller can choose to search by id or name,
*errp will be set only for exception.

Some code are modified based on Pavel's patch.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12 10:12:47 +02:00
Max Reitz
6f176b48f9 block: Image file option amendment
This patch adds the "amend" option to qemu-img which allows changing
image options on existing image files. It also adds the generic bdrv
implementation which is basically just a wrapper for the image format
specific function.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12 10:12:46 +02:00
Paolo Bonzini
5accc8408f scsi: prefer UUID to VM name for the initiator name
The UUID is unique even across multiple hosts, thus it is
better than a VM name even if it is less user-friendly.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 08:46:21 +02:00
Anthony Liguori
2d1fe1873a ARM queue:
* aarch64 preparation patchset (excluding the defconfigs, so this
    doesn't actually enable the new targets yet)
  * minor bugfixes and cleanups
  * disable "-cpu any" in system emulation mode
  * fix ARMv7M stack alignment on reset
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABCAAGBQJSL2jzAAoJEDwlJe0UNgzesqIP/0pn2qoSv6BXSjVHAlbGvOtC
 n4ZF6Aeoc+S9vvWbKk/2mCGNyf2ewokVCrekMSjWeD4i0WQwLPAIbwZ4RTmketCt
 KqJQQ2JrFQyu5xTlooc4NrAuO8XllEtFIdIl/Aob9HyZvlNQR+l81GP0LqipiTLz
 Dto1Cxack8BpOopy8hxBnR4xcE3yz9e+9b2P7iONJ4TYzs7vheu0j4qMOZtNyw/T
 mf7yKrv+YzvlbJJgM3tK9sgBShtGqyxgW6YO5OHrsM/D/9wc+ML6k3iMpf7Sr2RF
 1/P0xUZBkaXht3ZDBU/EOG5Gi+AqoPS2K/Quu/NFADn7dpV+qAeukiCHnhhCtPHc
 AbSl6oaHjpfEPC7JaORIdzu8+GAIhT6fWP4MNa0bkWtatGh3OXJvMboalu1jtARE
 DCpTvA4pRyjJ8WFO/CYASxeeFeZX7DYCy4RYklSk7cbQ5xH9n2Jq3g/92y+07KnQ
 bZYpP57Lor8p2bHenr8p9V/dIlIKTgQkcgqIumNSSrIBU4NCVb2G566kfTSKZy4S
 Alq/dmWs3oxmidviz8HT0aX6tVJgFU2rkIVE4nCZjCH/0fQYU7NVfMshFNLar8zQ
 lCe1K7Yiv+u6W/bgUIG3AM1GVbsb8X2YKNTEUXOls54Jzjep3lQrsoVCaaQLgaI5
 Cz+uCGX+4x4Pe9h6XWDk
 =oraU
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20130910' into staging

ARM queue:
 * aarch64 preparation patchset (excluding the defconfigs, so this
   doesn't actually enable the new targets yet)
 * minor bugfixes and cleanups
 * disable "-cpu any" in system emulation mode
 * fix ARMv7M stack alignment on reset

# gpg: Signature made Tue 10 Sep 2013 01:46:11 PM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found

# By Alexander Graf (13) and others
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20130910: (28 commits)
  configure: Add handling code for AArch64 targets
  linux-user: Add AArch64 support
  linux-user: Allow targets to specify a minimum uname release
  linux-user: Add AArch64 termbits.h definitions
  linux-user: Implement cpu_set_tls() and cpu_clone_regs() for AArch64
  linux-user: Make sure NWFPE code is 32 bit ARM only
  linux-user: Add signal handling for AArch64
  linux-user: Fix up AArch64 syscall handlers
  linux-user: Add syscall number definitions for AArch64
  linux-user: Add cpu loop for AArch64
  linux-user: Don't treat AArch64 cpu names specially
  target-arm: Add AArch64 gdbstub support
  target-arm: Add AArch64 translation stub
  target-arm: Prepare translation for AArch64 code
  target-arm: Disable 32 bit CPUs in 64 bit linux-user builds
  target-arm: Add new AArch64CPUInfo base class and subclasses
  target-arm: Pass DisasContext* to gen_set_pc_im()
  target-arm: Fix target_ulong/uint32_t confusions
  target-arm: Export cpu_env
  target-arm: Extract the disas struct to a header file
  ...

Message-id: 1378839142-7726-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-11 14:46:52 -05:00
Anthony Liguori
a640f07c0d Merge remote-tracking branch 'kraxel/usb.89' into staging
# By Gerd Hoffmann (2) and Miroslav Rezanina (2)
# Via Gerd Hoffmann
* kraxel/usb.89:
  ehci: save device pointer in EHCIState
  Remove dev-bluetooth.c dependency from vl.c
  Preparation for usb-bt-dongle conditional build
  usb: sanity check setup_index+setup_len in post_load

Message-id: 1378806073-25197-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-11 14:46:21 -05:00
Anthony Liguori
f69f0bcac9 Merge remote-tracking branch 'mdroth/qga-pull-2013-9-9' into staging
# By Tomoki Sekiyama (10) and Paul Burton (1)
# Via Michael Roth
* mdroth/qga-pull-2013-9-9:
  QMP/qemu-ga-client: Make timeout longer for guest-fsfreeze-freeze command
  qemu-ga: Install Windows VSS provider on `qemu-ga -s install'
  qemu-ga: Call Windows VSS requester in fsfreeze command handler
  qemu-ga: Add Windows VSS provider and requester as DLL
  error: Add error_set_win32 and error_setg_win32
  qemu-ga: Add configure options to specify path to Windows/VSS SDK
  Add a script to extract VSS SDK headers on POSIX system
  checkpatch.pl: Check .cpp files
  Add c++ keywords to QAPI helper script
  configure: Support configuring C++ compiler
  mips_malta: support up to 2GiB RAM

Message-id: 1378755701-2051-1-git-send-email-mdroth@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-11 14:46:08 -05:00
Anthony Liguori
97fdb9410b Merge remote-tracking branch 'sstabellini/xen-2013-09-09' into staging
# By Anthony PERARD
# Via Stefano Stabellini
* sstabellini/xen-2013-09-09:
  pc_q35: Initialize Xen.
  pc: Initializing ram_memory under Xen.

Message-id: alpine.DEB.2.02.1309091718030.6397@kaball.uk.xensource.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-11 14:45:57 -05:00
Anthony Liguori
964737ea19 Merge remote-tracking branch 'stefanha/block' into staging
# By Paolo Bonzini (21) and others
# Via Stefan Hajnoczi
* stefanha/block: (42 commits)
  qemu-iotests: Fixed test case 026
  qemu-iotests: Whitespace cleanup
  dataplane: Fix startup race.
  block: look for zero blocks in bs->file
  block: add default get_block_status implementation for protocols
  raw-posix: report unwritten extents as zero
  raw-posix: return get_block_status data and flags
  docs, qapi: document qemu-img map
  qemu-img: add a "map" subcommand
  block: return BDRV_BLOCK_ZERO past end of backing file
  block: use bdrv_has_zero_init to return BDRV_BLOCK_ZERO
  block: return get_block_status data and flags for formats
  block: define get_block_status return value
  block: introduce bdrv_get_block_status API
  block: make bdrv_has_zero_init return false for copy-on-write-images
  qemu-img: always probe the input image for allocated sectors
  block: expect errors from bdrv_co_is_allocated
  block: remove bdrv_is_allocated_above/bdrv_co_is_allocated_above distinction
  block: do not use ->total_sectors in bdrv_co_is_allocated
  block: make bdrv_co_is_allocated static
  ...

Message-id: 1378481953-23099-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-11 14:45:37 -05:00
Peter Maydell
4d017979aa abitypes.h: Remove incorrect ARM ABI_LLONG_ALIGNMENT
The ARM EABI specifies that 64 bit integers should be
8 aligned; remove our incorrect setting of 4 alignment.
This has no actual effect since it only set the alignment
for the 'abi_ullong' and 'abi_llong' types, which are used
only inside code which is MIPS-specific, but it will
avoid problems later if we use the types elsewhere.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-10 19:09:33 +01:00
Miroslav Rezanina
615fe4de4b Remove dev-bluetooth.c dependency from vl.c
Use usb_legacy_register handling to create bt-dongle device and remove code
dependency from vl.c so CONFIG_USB_BLUETOOTH can be disabled.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10 11:14:42 +02:00
Miroslav Rezanina
644e1a8a34 Preparation for usb-bt-dongle conditional build
To allow disable usb-bt-dongle device using CONFIG_BLUETOOTH option, some of
functions in vl.c file has to be made accessible in dev-bluetooth.c. This is
pure code moving.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10 11:14:41 +02:00
Tomoki Sekiyama
20840d4cfe error: Add error_set_win32 and error_setg_win32
These functions help maintaining homogeneous formatting of error messages
with Windows error code and description (generated by
g_win32_error_message()).

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-09 14:17:57 -05:00
Anthony PERARD
04d7bad8a4 pc: Initializing ram_memory under Xen.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
CC: qemu-stable@nongnu.org
2013-09-09 16:22:19 +00:00
Vincenzo Maffione
e9845f0985 e1000: add interrupt mitigation support
This patch partially implements the e1000 interrupt mitigation mechanisms.
Using a single QEMUTimer, it emulates the ITR register (which is the newer
mitigation register, recommended by Intel) and approximately emulates
RADV and TADV registers. TIDV and RDTR register functionalities are not
emulated (RDTR is only used to validate RADV, according to the e1000 specs).

RADV, TADV, TIDV and RDTR registers make up the older e1000 mitigation
mechanism and would need a timer each to be completely emulated. However,
a single timer has been used in order to reach a good compromise between
emulation accuracy and simplicity/efficiency.

The implemented mechanism can be enabled/disabled specifying the command
line e1000-specific boolean parameter "mitigation", e.g.

    qemu-system-x86_64 -device e1000,mitigation=on,... ...

For more information, see the Software developer's manual at
http://download.intel.com/design/network/manuals/8254x_GBe_SDM.pdf.

Interrupt mitigation boosts performance when the guest suffers from
an high interrupt rate (i.e. receiving short UDP packets at high packet
rate). For some numerical results see the following link
http://info.iet.unipi.it/~luigi/papers/20130520-rizzo-vm.pdf

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de> (for pc-* machines)
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 17:25:52 +02:00
Jan Kiszka
067404be62 net: Rename send_queue to incoming_queue
Each networking client has a queue for packets that could not yet be
delivered to that client. Calling this queue "send_queue" is highly
confusing as it has nothing to to with packets send from this client but
to it. Avoid this confusing by renaming it to "incoming_queue".

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 17:01:26 +02:00
Paolo Bonzini
4333bb7140 block: define get_block_status return value
Define the return value of get_block_status.  Bits 0, 1, 2 and 9-62
are valid; bit 63 (the sign bit) is reserved for errors.  Bits 3-8
are left for future extensions.

The return code is compatible with the old is_allocated API: if a driver
only returns 0 or 1 (aka BDRV_BLOCK_DATA) like is_allocated used to,
clients of is_allocated will not have any change in behavior.  Still,
we will return more precise information in the next patches and the
new definition of bdrv_is_allocated is already prepared for this.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
b6b8a33354 block: introduce bdrv_get_block_status API
For now, bdrv_get_block_status is just another name for bdrv_is_allocated.
The next patches will add more flags.

This also touches all block drivers with a mostly mechanical rename.  The
sole exception is cow; because it calls cow_co_is_allocated from the read
code, we keep that function and make cow_co_get_block_status a wrapper.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
4f5786376e block: remove bdrv_is_allocated_above/bdrv_co_is_allocated_above distinction
Now that bdrv_is_allocated detects coroutine context, the two can
use the same code.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
bdad13b9de block: make bdrv_co_is_allocated static
bdrv_is_allocated can detect coroutine context and go through a fast
path, similar to other block layer functions.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00
Fam Zheng
4f6fd3491c block: make bdrv_delete() static
Manage BlockDriverState lifecycle with refcnt, so bdrv_delete() is no
longer public and should be called by bdrv_unref() if refcnt is
decreased to 0.

This is an identical change because effectively, there's no multiple
reference of BDS now: no caller of bdrv_ref() yet, only bdrv_new() sets
bs->refcnt to 1, so all bdrv_unref() now actually delete the BDS.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00
Fam Zheng
9fcb025146 block: implement reference count for BlockDriverState
Introduce bdrv_ref/bdrv_unref to manage the lifecycle of
BlockDriverState. They are unused for now but will used to replace
bdrv_delete() later.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00
Benoît Canet
cc0681c454 block: Enable the new throttling code in the block layer.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:07 +02:00
Benoît Canet
5ddfffbdc5 throttle: Add a new throttling API implementing continuous leaky bucket.
Implement the continuous leaky bucket algorithm devised on IRC as a separate
module.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:07 +02:00
Jan Kiszka
3bb28b7208 memory: Provide separate handling of unassigned io ports accesses
Accesses to unassigned io ports shall return -1 on read and be ignored
on write. Ensure these properties via dedicated ops, decoupling us from
the memory core's handling of unassigned accesses.

Cc: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-05 18:11:43 +02:00
Amit Shah
7ba9addc16 char: move backends' io watch tag to CharDriverState
All the backends implement an io watcher tag for callbacks.  Move it to
CharDriverState from each backend's struct to make accessing the tag from
backend-neutral functions easier.

This will be used later to cancel a callback on chardev detach from a
frontend.

CC: <qemu-stable@nongnu.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2013-09-05 18:30:31 +05:30
Anthony Liguori
aaa6a40194 QOM CPUState refactorings / X86CPU
* Conversion of global CPU list to QTAILQ - preparing for CPU hot-unplug
 * Document X86CPU magic numbers for CPUID cache info
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJSJgdaAAoJEPou0S0+fgE/WqAQAJ6pcTymZO86NLKwcY4dD5Dr
 Es2aTs4XFs9V3+gpbH9vOA71n9HanFQp1s4ZUskQ2BVQU8cZeRUKlGhKJfqcEbPF
 H5wkxskqgV2Sw8+XWjQk80J/X/W6k10Fit64CUpQqxzd3HwXXzT/QHXzM8t6p79i
 KdEAsjaQYqR8/qa7+pd437lLcTiRb51FqB5u3ClbCbIKjnnjswr/ZypKr+CUc9WY
 1AzP9UKg0qSxz1yCkgzYHt3eWjfuGhsqn8KXVQfc+37xFRZp0uYQYkCahhwrPRUO
 jTg0eJKxoyH76t+2jIsnNHfd6r5zaTmVThGnun/SzJTGj8AFNrz81EfT1niJdp2/
 6RdykpWdqqeA3usKoSzBgTEAXGL50tCL0xiREk7hPwflxJqjbjFuVuttkazEcHZf
 Q2OS0tUFhYi3yUojms/YJYFUaNUhA033wJSjKGbFfSDdtJdjnxmB2r+LhsH4ByfS
 4SPU5zr4up1Yr1dnmIlNUA5W/KMgZseT3shasLhFmODR7wGvrQ7DuEHRs87UQbbM
 pedvN92VmWzByEvLNkICJGuaVer+mHznig9f1eOkxXlK4RdNBmAf5QYMU+oxbkUG
 fwXu0w7/aUJKpcYl6aYUmkhgn9dB3Oe/WTVLkvfg54MUFKpo4b72AR01+fWT91XO
 r8DQQYwP94htozAC6F9n
 =/bSY
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into staging

QOM CPUState refactorings / X86CPU

* Conversion of global CPU list to QTAILQ - preparing for CPU hot-unplug
* Document X86CPU magic numbers for CPUID cache info

# gpg: Signature made Tue 03 Sep 2013 10:59:22 AM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Andreas Färber (3) and Eduardo Habkost (1)
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
  target-i386: Use #defines instead of magic numbers for CPUID cache info
  cpu: Replace qemu_for_each_cpu()
  cpu: Use QTAILQ for CPU list
  a15mpcore: Use qemu_get_cpu() for generic timers
2013-09-03 12:33:32 -05:00
Anthony Liguori
bb7d4d82b6 Merge remote-tracking branch 'kwolf/for-anthony' into staging
# By Max Reitz (11) and others
# Via Kevin Wolf
* kwolf/for-anthony: (26 commits)
  qemu-iotests: Overlapping cluster allocations
  qcow2_check: Mark image consistent
  qcow2-refcount: Repair shared refcount blocks
  qcow2-refcount: Repair OFLAG_COPIED errors
  qcow2-refcount: Move OFLAG_COPIED checks
  qcow2: Employ metadata overlap checks
  qcow2: Metadata overlap checks
  qcow2: Add corrupt bit
  qemu-iotests: Snapshotting zero clusters
  qcow2-refcount: Snapshot update for zero clusters
  option: Add assigned flag to QEMUOptionParameter
  gluster: Abort on AIO completion failure
  block: Remove old raw driver
  switch raw block driver from "raw.o" to "raw_bsd.o"
  raw_bsd: register bdrv_raw
  raw_bsd: add raw_create_options
  raw_bsd: introduce "special members"
  raw_bsd: add raw_create()
  raw_bsd: emit debug events in bdrv_co_readv() and bdrv_co_writev()
  add skeleton for BSD licensed "raw" BlockDriver
  ...

Message-id: 1378111792-20436-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-03 12:32:46 -05:00
Anthony Liguori
5a93d5c2ab Merge remote-tracking branch 'mjt/trivial-patches' into staging
# By Stefan Weil (6) and others
# Via Michael Tokarev
* mjt/trivial-patches:
  aio / timers: use g_usleep() not sleep()
  adlib: sort offsets in portio registration
  qmp: fix integer usage in examples
  tci: Remove function tcg_out64 (fix broken build)
  target-arm: Report unimplemented opcodes (LOG_UNIMP)
  pflash_cfi02.c: fix debug macro
  configure: Remove unneeded redirections of stderr (pkg-config --exists)
  configure: Remove unneeded redirections of stderr (pkg-config --cflags, --libs)
  configure: Don't write .pyc files by default (python -B)
  curl: qemu_bh_new() can never return NULL
  slirp/arp_table.c: Avoid shifting into sign bit of signed integers
  configure: disable clang -Wstring-plus-int warning
  rdma: silly ipv6 bugfix
  misc: Fix some typos in names and comments
  slirp: Port redirection option behave differently on Linux and Windows

Message-id: 1378119695-14568-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-03 12:31:44 -05:00
Anthony Liguori
9889e04ac1 pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
 and a virtio bugfix for level interrupts.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQEcBAABAgAGBQJSIveoAAoJECgfDbjSjVRp2C8IAL7DE0oM0jfEB5DAd8jlULHx
 hA8RP21rFzyU8PwtHB+72+C1ImldBge4hvhI+qbsm6PoW3RCeV/lbESIRTiv8dCO
 pGUOFmv8MfJAH+WWFsle5mRisoTksYQWWBMHCOqvmaY4JL9pBQOhCLHVhV1XfjtL
 hO7uGrWmlijeILv5CxYyPMYuOEdVvRSZKzE+Fp2YKfNstiQrS5fJIlqmwCHrlneW
 l2atnt2d9ZV1K8QYiGg4GRVbSAMJvA1wum+0F4gnXIz9yAeOt+Ht1s8cNKQDMouJ
 r2OyVgPM9aS/XaO6ejct1Sjo7Vgh/Ublrpw3lFqV/qHix6rEHwy2I3JHFEJPjvk=
 =SytJ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pc,pci,virtio fixes and cleanups

This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Sun 01 Sep 2013 03:15:36 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Michael S. Tsirkin (3) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  virtio_pci: fix level interrupts with irqfd
  pc: reduce duplication, fix PIIX descriptions
  hw: Clean up bogus default boot order
  pci: add config space access traces
  pc: fix regression for 64 bit PCI memory
  pci: Introduce helper to retrieve a PCI device's DMA address space

Message-id: 1378023590-11109-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-03 12:31:07 -05:00
Anthony Liguori
5cff81f098 QOM device refactorings
* Fix QOM and ISA documentation errors
 * Extend object_initialize() et al. to check the instance size
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJSIPBUAAoJEPou0S0+fgE/Wo0QAISAHVdHBvG7YzrgnpX89hCC
 MCqk5ny0FDZtlJXI5mqitgtBC0aqdhwgRxxfxjZ0/g7e8NysPUkWU9Zn7b/6WWKu
 A4ckRqxAVR6ZR0TNX9XvcoMoaebN0v5cfXDGjjqizs8HXdfs1bbAK5husMTka5df
 qDgRoFPEd1NmA/qpTu7EK74dIRkiB0o5c7Iyc8tNdkFK6it3fn8FW4fL0mk/61dc
 5VwZaIb1UMg8RAh/LMbdnIanWHYM8Yg7DMljdA4frZ53x5R82HxedfGB36L7YRwF
 GlgjxUn+/M1ZFdnzlX+cc330q82K0Tg3C94su1tR/3FuY+Da/9f97/e5WAYIN3v1
 peneh6szGemqRJD1TxBxvoq2GDHVIgx7xcsHjyOWfy08XDcO0UUF7WU1dNddhEl8
 9DX1tihSZJNugKoB2QNBZWcn1FPVAnxpbUfsAt/m1kdbxGPnOM2McEIOwabcQhNl
 odht/aEKB5A8TeRxFKBwozMXxFjh7AX2m8/YsQlApBWKefIV3411/WmO2tEg5kts
 1vO5ZyBM8lOoO5QK/Uvqne0hi/8hALyoO3v9e2IIAd3yE9hYUhk/sQ5our/bfW+M
 auiaoTcVvpFac1nBTsvY4Be1e+B2xqMMxLpsvsmENHcEUCOcAsbCXG/t1NkJR66+
 ZQLaX5ioxgd37zKIY8dT
 =LiUs
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'afaerber/tags/qom-devices-for-anthony' into staging

QOM device refactorings

* Fix QOM and ISA documentation errors
* Extend object_initialize() et al. to check the instance size

# gpg: Signature made Fri 30 Aug 2013 02:19:48 PM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Andreas Färber (14) and others
# Via Andreas Färber
* afaerber/tags/qom-devices-for-anthony:
  isa: Fix documentation of isa_register_portio_list()
  qom: Assert instance size in object_initialize_with_type()
  qom: Pass available size to object_initialize()
  qdev: Pass size to qbus_create_inplace()
  virtio-mmio: Pass size to virtio_mmio_bus_new()
  virtio-ccw: Pass size to virtio_ccw_bus_new()
  s390-virtio-bus: Pass size to virtio_s390_bus_new()
  virtio-pci: Pass size to virtio_pci_bus_new()
  usb: Pass size to usb_bus_new()
  scsi: Pass size to scsi_bus_new()
  pci: Pass size to pci_bus_new_inplace()
  ide: Pass size to ide_bus_new()
  ipack: Pass size to ipack_bus_new_inplace()
  intel-hda: Pass size to hda_codec_bus_init()
  qom: Fix object_initialize_with_type() argument name in documentation
  virtio: Remove unnecessary OBJECT() casts
  object: Fix typo in qom/object.h
2013-09-03 12:30:51 -05:00
Andreas Färber
38fcbd3f08 cpu: Replace qemu_for_each_cpu()
It was introduced to loop over CPUs from target-independent code, but
since commit 182735efaf target-independent
CPUState is used.

A loop can be considered more efficient than function calls in a loop,
and CPU_FOREACH() hides implementation details just as well, so use that
instead.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-09-03 12:25:55 +02:00
Andreas Färber
bdc44640cb cpu: Use QTAILQ for CPU list
Introduce CPU_FOREACH(), CPU_FOREACH_SAFE() and CPU_NEXT() shorthand
macros.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-09-03 12:25:55 +02:00
Aurelien Jarno
545825d4cd Merge branch 'tcg-next' of git://github.com/rth7680/qemu
* 'tcg-next' of git://github.com/rth7680/qemu: (29 commits)
  tcg-i386: Make use of zero-extended memory helper routines
  tcg: Introduce zero and sign-extended versions of load helpers
  exec: Split softmmu_defs.h
  target: Include softmmu_exec.h where forgotten
  exec: Rename USUFFIX to LSUFFIX
  tcg-i386: Don't perform GETPC adjustment in TCG code
  exec: Reorganize the GETRA/GETPC macros
  configure: Allow x32 as a host
  tcg-i386: Adjust tcg_out_tlb_load for x32
  tcg-i386: Use intptr_t appropriately
  tcg: Fix jit debug for x32
  tcg: Use appropriate types in tcg_reg_alloc_call
  tcg: Change tcg_out_ld/st offset to intptr_t
  tcg: Change tcg_gen_exit_tb argument to uintptr_t
  tcg: Use uintptr_t in TCGHelperInfo
  tcg: Change relocation offsets to intptr_t
  tcg: Change memory offsets to intptr_t
  tcg: Change frame pointer offsets to intptr_t
  tcg: Define TCG_ptr properly
  tcg: Define TCG_TYPE_PTR properly
  ...
2013-09-03 01:35:43 +02:00
Richard Henderson
c8f94df593 tcg: Introduce zero and sign-extended versions of load helpers
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02 09:08:31 -07:00
Richard Henderson
e58eb53413 exec: Split softmmu_defs.h
The _cmmu helpers can be moved to exec-all.h.  The helpers that are
used from TCG will shortly need access to tcg_target_long so move
their declarations into tcg.h.

This requires minor include adjustments to all TCG backends.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02 09:08:30 -07:00
Richard Henderson
701e3a5cc0 exec: Rename USUFFIX to LSUFFIX
In a following patch, there will be confusion between multiple "unsigned"
suffixes; rename this one so as to imply "load".

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02 09:08:30 -07:00
Richard Henderson
0f842f8a24 exec: Reorganize the GETRA/GETPC macros
Always define GETRA; use __builtin_extract_return_addr, rather than
having a special case for s390.  Split GETPC_ADJ out of GETPC; use 2
universally, rather than having a special case for arm.

Rename GETPC_LDST to GETRA_LDST to indicate that it does not
contain the GETPC_ADJ value.  Likewise with GETPC_EXT to GETRA_EXT.

Perform the GETPC_ADJ adjustment inside helper_ret_ld/st.  This will
allow backends to pass along the "true" return address rather than
the massaged GETPC value.  In the meantime, double application of
GETPC_ADJ does not hurt, since the call insn in all ISAs is at least
4 bytes long.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02 09:08:30 -07:00
Richard Henderson
8cfd04959a tcg: Change tcg_gen_exit_tb argument to uintptr_t
And update all users.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02 09:08:30 -07:00
Max Reitz
afa50193cd qcow2-refcount: Repair shared refcount blocks
If the refcount of a refcount block is greater than one, we can at least
try to repair that problem by duplicating the affected block.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-02 10:06:59 +02:00
Anton Blanchard
42561bf2e4 pseries: Add H_SET_MODE hcall to change guest exception endianness
H_SET_MODE is used for controlling various partition settings. One
of these settings is the endianness a guest takes its exceptions in.

Signed-off-by: Anton Blanchard <anton@samba.org>
[agraf: fix whitespace]
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-02 10:06:42 +02:00
Alexey Kardashevskiy
f1c2dc7c86 spapr-pci: rework MSI/MSIX
On the sPAPR platform a guest allocates MSI/MSIX vectors via RTAS
hypercalls which return global IRQ numbers to a guest so it only
operates with those and never touches MSIMessage.

Therefore MSIMessage handling is completely hidden in QEMU.

Previously every sPAPR PCI host bridge implemented its own MSI window
to catch msi_notify()/msix_notify() calls from QEMU devices (virtio-pci
or vfio) and route them to the guest via qemu_pulse_irq().
MSIMessage used to be encoded as:
	.addr - address within the PHB MSI window;
	.data - the device index on PHB plus vector number.
The MSI MR write function translated this MSIMessage to a global IRQ
number and called qemu_pulse_irq().

However the total number of IRQs is not really big (at the moment it is
1024 IRQs starting from 4096) and even 16bit data field of MSIMessage
seems to be enough to store an IRQ number there.

This simplifies MSI handling in sPAPR PHB. Specifically, this does:
1. remove a MSI window from a PHB;
2. add a single memory region for all MSIs to sPAPREnvironment
and spapr_pci_msi_init() to initialize it;
3. encode MSIMessage as:
    * .addr - a fixed address of SPAPR_PCI_MSI_WINDOW==0x40000000000ULL;
    * .data as an IRQ number.
4. change IRQ allocator to align first IRQ number in a block for MSI.
MSI uses lower bits to specify the vector number so the first IRQ has to
be aligned. MSIX does not need any special allocator though.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-02 10:06:42 +02:00
Stefan Weil
4c293dc6e4 misc: Fix some typos in names and comments
Most typos were found using a modified version of codespell:

accross -> across
issueing -> issuing
TICNT_THRESHHOLD -> TICNT_THRESHOLD
bandwith -> bandwidth
VCARD_7816_PROPIETARY -> VCARD_7816_PROPRIETARY
occured -> occurred
gaurantee -> guarantee
sofware -> software

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-01 18:59:24 +04:00
Michael S. Tsirkin
a0dba644c1 pc: reduce duplication, fix PIIX descriptions
We have a lot of code duplication between machine types,
this increases with each new machine type
and each new field.

This has already introduced a minor bug: description
for pc-1.3 says "Standard PC" while description for
pc-1.4 is "Standard PC (i440FX + PIIX, 1996)"
which makes you think 1.3 is somehow more standard,
or newer, while in fact it's a revision of the same PC.

This patch addresses this issue by using macros, along
the lines used by PC_COMPAT_X_X - only for
non-property options.

The approach can extend to non-PC machine types.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-01 10:43:25 +03:00
Hervé Poussineau
520902a656 isa: Fix documentation of isa_register_portio_list()
Commit b40acf9 (ioport: Switch dispatching to memory core layer,
2013-06-24) removed all instances of old_portio.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 21:15:44 +02:00
Andreas Färber
5b9237f67c qom: Assert instance size in object_initialize_with_type()
This catches objects initializing beyond allocated memory, e.g.,
when subtypes get extended with instance state of their own.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 21:15:44 +02:00
Andreas Färber
213f0c4f61 qom: Pass available size to object_initialize()
To be passed on to object_initialize_with_type().

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (virtio-ccw)
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 21:15:44 +02:00
Andreas Färber
fb17dfe057 qdev: Pass size to qbus_create_inplace()
To be passed to object_initialize().

Since commit 39355c3826 the argument is
void*, so drop some superfluous (BusState *) casts or direct parent
field usages.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 21:15:35 +02:00
Andreas Färber
c889b3a55d usb: Pass size to usb_bus_new()
To be passed to qbus_create_inplace().

Use DEVICE() cast to avoid a direct parent field access.

Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 20:14:39 +02:00
Andreas Färber
b1187b51ff scsi: Pass size to scsi_bus_new()
To be passed to qbus_create_inplace().

Use DEVICE() casts instead of direct parent field access.

Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 20:14:39 +02:00
Andreas Färber
dd301ca607 pci: Pass size to pci_bus_new_inplace()
To be passed to qbus_create_inplace().

Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 20:14:39 +02:00
Andreas Färber
53caad9a31 qom: Fix object_initialize_with_type() argument name in documentation
@obj -> @data.

Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 20:14:38 +02:00
Peter Chubb
70392912ed object: Fix typo in qom/object.h
There's been a cut-and-paste error, it looks like, in the documentation
in qom/object.h.

Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 20:14:37 +02:00
Max Reitz
a40f1c2add qcow2: Metadata overlap checks
Two new functions are added; the first one checks a given range in the
image file for overlaps with metadata (main header, L1 tables, L2
tables, refcount table and blocks).

The second one should be used immediately before writing to the image
file as it calls the first function and, upon collision, marks the
image as corrupt and makes the BDS unusable, thereby preventing
further access.

Both functions take a bitmask argument specifying the structures which
should be checked for overlaps, making it possible to also check
metadata writes against colliding with other structures.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-30 15:48:43 +02:00
Max Reitz
d4ca092a42 option: Add assigned flag to QEMUOptionParameter
Adds an "assigned" flag to QEMUOptionParameter which is cleared at the
beginning of parse_option_parameters and set on (successful)
set_option_parameter and set_option_parameter_int.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-30 15:28:52 +02:00
Wenchao Xia
d2674b2cf7 monitor: avoid use of global *cur_mon in monitor_find_completion()
Parameter *mon is added, and local variable *mon added in previous patch
is removed. The caller readline_completion(), pass rs->mon as value, which
should be initialized in readline_init() called by monitor_init().

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-08-30 07:41:14 -04:00
Anthony Liguori
b5d54bd421 Merge remote-tracking branch 'qemu-kvm/uq/master' into stable-1.5
* qemu-kvm/uq/master:
  kvm-stub: fix compilation
  kvm: shorten the parameter list for get_real_device()
  kvm: i386: fix LAPIC TSC deadline timer save/restore
  kvm-all.c: max_cpus should not exceed KVM vcpu limit
  kvm: Simplify kvm_handle_io
  kvm: x86: fix setting IA32_FEATURE_CONTROL with nested VMX disabled
  kvm: add KVM_IRQFD_FLAG_RESAMPLE support
  kvm: migrate vPMU state
  target-i386: remove tabs from target-i386/cpu.h
  Initialize IA32_FEATURE_CONTROL MSR in reset and migration

Conflicts:
	target-i386/cpu.h
	target-i386/kvm.c

aliguori: fixup trivial conflicts due to whitespace and added cpu
          argument

Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-08-29 17:21:51 -05:00
Anthony Liguori
3e998a7788 pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups, future-proofing of ROM files,
 and a virtio bugfix correcting splice on virtio console.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQEcBAABAgAGBQJSGvbsAAoJECgfDbjSjVRp0qsH/2N/b/5bNhL6gx5Kjigzv7Lt
 bmCUsSsUm/Rnhke2SpDPVdIOU9W5WIX2zte8qiXuBJi3j/RS9procbgUZrCetpUI
 GHQOn+n8e2TX/P9CIcHaN/bA1b+Kx+bvaVbDL/6P2PJvodbDGwDLp/9y+Tisv5Ye
 kLow8Y4ZJcaTlmPf/Mh1AnhNa3gel231A3qwugVUNDSyITM6pG/0M07xk8YBj+JJ
 6DYrlK0bKMNDxPu5St+YP94D1ODv2zM1aio/TdMUaNfqTZM1iqGTj3zKkBS2PjT0
 RhuU2x4N91lY/uCdudtWSj5dYtfRT/xw7qwNAz9IHNz6RlGeX0n++ClMC8z9Y8A=
 =Pc09
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into stable-1.5

pc,pci,virtio fixes and cleanups

This includes pc and pci cleanups, future-proofing of ROM files,
and a virtio bugfix correcting splice on virtio console.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 26 Aug 2013 01:34:20 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Markus Armbruster (5) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  virtio: virtqueue_get_avail_bytes: fix desc_pa when loop over the indirect descriptor table
  pc_piix: Kill pc_init1() memory region args
  pc: pc_compat_1_4() now can call pc_compat_1_5()
  pc: Create pc_compat_*() functions
  pc: Kill pc_init_pci_1_0()
  pc: Don't explode QEMUMachineInitArgs into local variables needlessly
  pc: Don't prematurely explode QEMUMachineInitArgs
  ppc: Don't duplicate QEMUMachineInitArgs in PPCE500Params
  ppc: Don't explode QEMUMachineInitArgs into local variables needlessly
  sun4: Don't prematurely explode QEMUMachineInitArgs
  q35: Add PCIe switch to example q35 configuration
  loader: store FW CFG ROM files in RAM
  arch_init: align MR size to target page size
  pc: cleanup 1.4 compat support

Message-id: 1377535318-30491-1-git-send-email-mst@redhat.com
2013-08-29 17:19:19 -05:00
Richard Henderson
584950fd4e tcg-i386: Remove abort from GETPC_LDST
Indeed, remove it entirely and remove the is_tcg_gen_code check
from GETPC_EXT.

Fixes https://bugs.launchpad.net/qemu/+bug/1218098 wherein a call
to a "normal" helper function performed a sequence of tail calls
all the way into the memory helper functions, leading to a stack
frame in which the memory helper function appeared to be called
directly from tcg.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-08-29 20:20:39 +02:00
Markus Armbruster
c165473269 hw: Clean up bogus default boot order
We set default boot order "cad" in every single machine definition
except "pseries" and "moxiesim", even though very few boards actually
care for boot order, and "cad" makes sense for even fewer.

Machines that care:

* pc and its variants

  Accept up to three letters 'a', 'b' (undocumented alias for 'a'),
  'c', 'd' and 'n'.  Reject all others (fatal with -boot).

* nseries (n800, n810)

  Check whether order starts with 'n'.  Silently ignored otherwise.

* prep, g3beige, mac99

  Extract the first character the machine understands (subset of
  'a'..'f').  Silently ignored otherwise.

* spapr

  Accept an arbitrary string (vl.c restricts it to contain only
  'a'..'p', no duplicates).

* sun4[mdc]

  Use the first character.  Silently ignored otherwise.

Strip characters these machines ignore from their default boot order.

For all other machines, remove the unused default boot order
alltogether.

Note that my rename of QEMUMachine member boot_order to
default_boot_order and QEMUMachineInitArgs member boot_device to
boot_order has a welcome side effect: it makes every use of boot
orders visible in this patch, for easy review.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-28 10:16:47 +03:00
Michael S. Tsirkin
1466cef32d pc: fix regression for 64 bit PCI memory
commit 3984890181
    pc: limit 64 bit hole to 2G by default
introduced a way for management to control
the window allocated to the 64 bit PCI hole.

This is useful, but existing management tools do not know how to set
this property.  As a result, e.g. specifying a large ivshmem device with
size > 4G is broken by default.  For example this configuration no
longer works:

-device ivshmem,size=4294967296,chardev=cfoo
-chardev socket,path=/tmp/sock,id=cfoo,server,nowait

Fix this by detecting that hole size was not specified
and defaulting to the backwards-compatible value of 1 << 62.

Cc: qemu-stable@nongnu.org
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-27 10:13:41 +03:00
Alexey Kardashevskiy
9eda7d373e pci: Introduce helper to retrieve a PCI device's DMA address space
A PCI device's DMA address space (possibly an IOMMU) is returned by a
method on the PCIBus.  At the moment that only has one caller, so the
method is simply open coded.  We'll need another caller for VFIO, so
this patch introduces a helper/wrapper function.

If IOMMU is not set, the pci_device_iommu_address_space() function
returns the parent's IOMMU skipping the "bus master" address space as
otherwise proper emulation would require more effort for no benefit.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[aik: added inheritance from parent if iommu is not set for the current bus]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-27 08:30:48 +03:00
Richard Henderson
401c227b0a tcg-i386: Use new return-argument ld/st helpers
Discontinue the jump-around-jump-to-jump scheme, trading it for a single
immediate move instruction.  The two extra jumps always consume 7 bytes,
whereas the immediate move is either 5 or 7 bytes depending on where the
code_gen_buffer gets located.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-08-26 13:31:54 -07:00
Richard Henderson
aac1fb0576 tcg: Tidy softmmu_template.h
Avoid a loop in the tlb_fill path; the fill will either succeed or
generate an exception.

Inline the slow_ld/st function; it was a complete copy of the main
helper except for the actual cross-page unaligned code, and the
compiler was inlining it anyway.

Add unlikely markers optimizing for the most common case of simple
tlb miss.

Make sure the compiler can optimize away the unaligned paths for a
1 byte access.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-08-26 13:31:54 -07:00
Richard Henderson
e25c3887e6 tcg: Add mmu helpers that take a return address argument
Allow the code that tcg generates to be less obtuse, passing in
the return address directly instead of computing it in the helper.

Maintain the old entrance point unchanged as an alternate entry point.

Delete the helper_st*_cmmu prototypes; the implementations did not exist.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-08-26 13:31:53 -07:00
Anthony Liguori
f7ad538e1e Merge remote-tracking branch 'stefanha/block' into staging
# By Alex Bligh (32) and others
# Via Stefan Hajnoczi
* stefanha/block: (42 commits)
  win32-aio: drop win32_aio_flush_cb()
  aio-win32: replace incorrect AioHandler->opaque usage with ->e
  aio / timers: remove dummy_io_handler_flush from tests/test-aio.c
  aio / timers: Remove legacy interface
  aio / timers: Switch entire codebase to the new timer API
  aio / timers: Add scripts/switch-timer-api
  aio / timers: Add test harness for AioContext timers
  aio / timers: convert block_job_sleep_ns and co_sleep_ns to new API
  aio / timers: Convert rtc_clock to be a QEMUClockType
  aio / timers: Remove main_loop_timerlist
  aio / timers: Rearrange timer.h & make legacy functions call non-legacy
  aio / timers: Add qemu_clock_get_ms and qemu_clock_get_ms
  aio / timers: Remove legacy qemu_clock_deadline & qemu_timerlist_deadline
  aio / timers: Remove alarm timers
  aio / timers: Add documentation and new format calls
  aio / timers: Use all timerlists in icount warp calculations
  aio / timers: Introduce new API timer_new and friends
  aio / timers: On timer modification, qemu_notify or aio_notify
  aio / timers: Convert mainloop to use timeout
  aio / timers: Convert aio_poll to use AioContext timers' deadline
  ...

Message-id: 1377202298-22896-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-08-26 09:19:50 -05:00
Alex Bligh
b4049b74b9 aio / timers: Remove legacy interface
Remove the legacy interface from include/qemu/timers.h.

Ensure struct QEMUClock is not exposed at all.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Alex Bligh
bc72ad6754 aio / timers: Switch entire codebase to the new timer API
This is an autogenerated patch using scripts/switch-timer-api.

Switch the entire code base to using the new timer API.

Note this patch may introduce some line length issues.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Alex Bligh
7483d1e547 aio / timers: convert block_job_sleep_ns and co_sleep_ns to new API
Convert block_job_sleep_ns and co_sleep_ns to use the new timer
API.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Alex Bligh
884f17c235 aio / timers: Convert rtc_clock to be a QEMUClockType
Convert rtc_clock to be a QEMUClockType

Move rtc_clock users to use the new API

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Alex Bligh
7bf8fbde44 aio / timers: Remove main_loop_timerlist
Now we have timerlistgroups implemented and main_loop_tlg, we
no longer need the concept of a default timer list associated
with each clock. Remove it and simplify initialisation of
clocks and timer lists.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Alex Bligh
40daca54cd aio / timers: Rearrange timer.h & make legacy functions call non-legacy
Rearrange timer.h so it is in order by function type.

Make legacy functions call non-legacy functions rather than vice-versa.

Convert cpus.c to use new API.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Alex Bligh
55a197dab4 aio / timers: Add qemu_clock_get_ms and qemu_clock_get_ms
Add utility functions qemu_clock_get_ms and qemu_clock_get_us

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:55 +02:00
Alex Bligh
63111b69cc aio / timers: Remove legacy qemu_clock_deadline & qemu_timerlist_deadline
Remove qemu_clock_deadline and qemu_timerlist_deadline now we are using
the ns functions throughout.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:55 +02:00
Alex Bligh
6d32717155 aio / timers: Remove alarm timers
Remove alarm timers from qemu-timers.c now we use g_poll / ppoll
instead.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:55 +02:00
Alex Bligh
54904d2a91 aio / timers: Add documentation and new format calls
Add documentation for existing qemu timer calls. Add new format
calls of the format timer_XXX rather than qemu_XXX_timer
for consistency.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:53 +02:00
Alex Bligh
ac70aafc28 aio / timers: Use all timerlists in icount warp calculations
Notify all timerlists derived from vm_clock in icount warp
calculations.

When calculating timer delay based on vm_clock deadline, use
all timerlists.

For compatibility, maintain an apparent bug where when using
icount, if no vm_clock timer was set, qemu_clock_deadline
would return INT32_MAX and always set an icount clock expiry
about 2 seconds ahead.

NB: thread safety - when different timerlists sit on different
threads, this will need some locking.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:28 +02:00
Alex Bligh
a3a726ae09 aio / timers: Introduce new API timer_new and friends
Introduce new API for creating timers - timer_new and
_ns, _ms, _us derivatives.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:28 +02:00
Alex Bligh
b1bbfe72ec aio / timers: On timer modification, qemu_notify or aio_notify
On qemu_mod_timer_ns, ensure qemu_notify or aio_notify is called to
end the appropriate poll(), irrespective of use_icount value.

On qemu_clock_enable, ensure qemu_notify or aio_notify is called for
all QEMUTimerLists attached to the QEMUClock.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:28 +02:00
Alex Bligh
4e29e8311a aio / timers: Add aio_timer_init & aio_timer_new wrappers
Add aio_timer_init and aio_timer_new wrapper functions.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:28 +02:00
Alex Bligh
d5541d8680 aio / timers: Add a notify callback to QEMUTimerList
Add a notify pointer to QEMUTimerList so it knows what to notify
on a timer change.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:28 +02:00
Alex Bligh
dae21b98b9 aio / timers: Add QEMUTimerListGroup to AioContext
Add a QEMUTimerListGroup each AioContext (meaning a QEMUTimerList
associated with each clock is added) and delete it when the
AioContext is freed.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:27 +02:00
Alex Bligh
754d6a544d aio / timers: Add QEMUTimerListGroup and helper functions
Add QEMUTimerListGroup and helper functions, to represent
a QEMUTimerList associated with each clock. Add a default
QEMUTimerListGroup representing the default timer lists
which are not associated with any other object (e.g.
an AioContext as added by future patches).

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:27 +02:00
Alex Bligh
6a1751b7aa aio / timers: Untangle include files
include/qemu/timer.h has no need to include main-loop.h and
doing so causes an issue for the next patch. Unfortunately
various files assume including timers.h will pull in main-loop.h.
Untangle this mess.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:27 +02:00
Alex Bligh
ff83c66ecc aio / timers: Split QEMUClock into QEMUClock and QEMUTimerList
Split QEMUClock into QEMUClock and QEMUTimerList so that we can
have more than one QEMUTimerList associated with the same clock.

Introduce a main_loop_timerlist concept and make existing
qemu_clock_* calls that actually should operate on a QEMUTimerList
call the relevant QEMUTimerList implementations, using the clock's
default timerlist. This vastly reduces the invasiveness of this
change and means the API stays constant for existing users.

Introduce a list of QEMUTimerLists associated with each clock
so that reenabling the clock can cause all the notifiers
to be called. Note the code to do the notifications is added
in a later patch.

Switch QEMUClockType to an enum. Remove global variables vm_clock,
host_clock and rt_clock and add compatibility defines. Do not
fix qemu_next_alarm_deadline as it's going to be deleted.

Add qemu_clock_use_for_deadline to indicate whether a particular
clock should be used for deadline calculations. When use_icount
is true, vm_clock should not be used for deadline calculations
as it does not contain a nanosecond count. Instead, icount
timeouts come from the execution thread doing aio_notify or
qemu_notify as appropriate. This function is used in the next
patch.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:27 +02:00
Alex Bligh
f9a976b740 aio / timers: Make qemu_run_timers and qemu_run_all_timers return progress
Make qemu_run_timers and qemu_run_all_timers return progress
so that aio_poll etc. can determine whether a timer has been
run.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:27 +02:00
Alex Bligh
4e0c6529fc aio / timers: add ppoll support with qemu_poll_ns
Add qemu_poll_ns which works like g_poll but takes a nanosecond
timeout.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:26 +02:00
Anthony Liguori
5211333bf7 Merge remote-tracking branch 'luiz/queue/qmp' into staging
# By Laszlo Ersek (8) and others
# Via Luiz Capitulino
* luiz/queue/qmp:
  scripts/qapi.py: Avoid syntax not supported by Python 2.4
  monitor: print the invalid char in error message
  OptsVisitor: introduce unit tests, with test cases for range flattening
  add "test-int128" and "test-bitops" to .gitignore
  OptsVisitor: don't try to flatten overlong integer ranges
  OptsVisitor: opts_type_uint64(): recognize intervals when LM_IN_PROGRESS
  OptsVisitor: rebase opts_type_uint64() to parse_uint_full()
  OptsVisitor: opts_type_int(): recognize intervals when LM_IN_PROGRESS
  OptsVisitor: introduce list modes for interval flattening
  OptsVisitor: introduce basic list modes
  Convert stderr message calling error_get_pretty() to error_report()

Message-id: 1377015041-6567-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-08-22 09:29:25 -05:00
Alex Bligh
02a03a9f12 aio / timers: add qemu-timer.c utility functions
Add utility functions to qemu-timer.c for nanosecond timing.

Add qemu_clock_deadline_ns to calculate deadlines to
nanosecond accuracy.

Add utility function qemu_soonest_timeout to calculate soonest deadline.

Add qemu_timeout_ns_to_ms to convert a timeout in nanoseconds back to
milliseconds for when ppoll is not used.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 15:58:05 +02:00
Alex Bligh
58ac56b9ad aio / timers: Rename qemu_new_clock and expose clock types
Rename qemu_new_clock to qemu_clock_new.

Expose clock types.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 15:58:05 +02:00
Alex Bligh
e93379b039 aio / timers: Rename qemu_timer_* functions
Rename four functions in preparation for new API.

Rename qemu_timer_expired to timer_expired
Rename qemu_timer_expire_time_ns to timer_expire_time_ns
Rename qemu_timer_pending to timer_pending
Rename qemu_timer_expired_ns to timer_expired_ns

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 15:58:05 +02:00
Asias He
0d51b4debe block: Introduce bs->zero_beyond_eof
In 4146b46c42e0989cb5842e04d88ab6ccb1713a48 (block: Produce zeros when
protocols reading beyond end of file), we break qemu-iotests ./check
-qcow2 022. This happens because qcow2 temporarily sets ->growable = 1
for vmstate accesses (which are stored beyond the end of regular image
data).

We introduce the bs->zero_beyond_eof to allow qcow2_load_vmstate() to
disable ->zero_beyond_eof temporarily in addition to enable ->growable.

[Since the broken patch "block: Produce zeros when protocols reading
beyond end of file" has not been merged yet, I have applied this fix
*first* and will then apply the next patch to keep the tree bisectable.
-- Stefan]

Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 14:10:21 +02:00
Michael S. Tsirkin
04920fc0fa loader: store FW CFG ROM files in RAM
ROM files that are put in FW CFG are copied to guest ram, by BIOS, but
they are not backed by RAM so they don't get migrated.

Each time we change two bytes in such a ROM this breaks cross-version
migration: since we can migrate after BIOS has read the first byte but
before it has read the second one, getting an inconsistent state.

Future-proof this by creating, for each such ROM,
an MR serving as the backing store.
This MR is never mapped into guest memory, but it's registered
as RAM so it's migrated with the guest.

Naturally, this only helps for -M 1.7 and up, older machine types
will still have the cross-version migration bug.
Luckily the race window for the problem to trigger is very small,
which is also likely why we didn't notice the cross-version
migration bug in testing yet.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2013-08-21 00:18:39 +03:00
Anthony Liguori
ecfe10c9a6 target-arm queue
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABCAAGBQJSE3WMAAoJEDwlJe0UNgzetMcP/0lKE1tRvXjUk78Jazqff/ET
 op01vY5FiMurt9/ncV2kwTKGd5S/o8zmqf+3vbGijX9zlWMD1h1eJ/k8UeQxuCBf
 XYIPZhLESpBl7ex6b7G4Z0TUTT3qdLqHKTrdEzzTiwbmo1eu8cF2zWGh7eeeK/pA
 hX0BFlkBUo7SmlDOq4vj+88N3C+igcvE1UtOa9l17XpoLURkXZ0BFmy8Ew0f9iPj
 uWH9prnUpYAvzektZqEEGZQV9p1CM8O06GkdMFMqSSEU/YBnZY1pJrS+dOOZ3676
 PQuGGdkOEPqBsz0dHPVifFXySg471LIYFUJWYGY69Uw4kGIkb1rEBuO8d5eJuFbn
 2UYUnxOSNw3atBaE2E3TCKCQSBjrlZ/WSnuz873I50qz+DBnQ5fagG5RYKySQJcR
 UReC5WnWWwQh8oynx10lG6eggTSQZNxdHxF6VGTeygYPtuxlXdMPw+eveySxk6IH
 a4fP1GzlDKIKh7O0yc2pyPF5UsqZ1JmIwrkmBuR7sgml7r0T4AaEndu8b9xYg94j
 fHCgdLMFg5z8uWlzv5WzWX6PwYI9t46EWxHCk7x/Nrnp0WyF/XHhGipiS3AUOAQK
 pQlLOA+ru0UVAHSFM4nCikNDqo4kxuM3BOt+ypw69f56ImnpqAGruUUgH/Ua9vze
 DevOaXopdfsYczg6I+AF
 =Qnph
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20130820' into staging

target-arm queue

# gpg: Signature made Tue 20 Aug 2013 08:56:28 AM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found

# By Peter Maydell (20) and Peter Chubb (1)
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20130820: (21 commits)
  hw/timer/imx_epit: Simplify and fix imx_epit implementation
  default-configs: Fix A9MP and A15MP config names
  hw/cpu/a15mpcore: Wire generic timer outputs to GIC inputs
  target-arm: Implement the generic timer
  target-arm: Support coprocessor registers which do I/O
  target-arm: Allow raw_read() and raw_write() to handle 64 bit regs
  hw/arm/pic_cpu: Remove the now-unneeded arm_pic_init_cpu()
  hw/arm/xilinx_zynq: Don't use arm_pic_init_cpu()
  hw/arm/vexpress: Don't use arm_pic_init_cpu()
  hw/arm/versatilepb: Don't use arm_pic_init_cpu()
  hw/arm/strongarm: Don't use arm_pic_init_cpu()
  hw/arm/realview: Don't use arm_pic_init_cpu()
  hw/arm/omap*: Don't use arm_pic_init_cpu()
  hw/arm/musicpal: Don't use arm_pic_init_cpu()
  hw/arm/kzm: Don't use arm_pic_init_cpu()
  hw/arm/integratorcp: Don't use arm_pic_init_cpu()
  hw/arm/highbank: Don't use arm_pic_init_cpu()
  hw/arm/exynos4210: Don't use arm_pic_init_cpu()
  hw/arm/armv7m: Don't use arm_pic_init_cpu()
  target-arm: Make IRQ and FIQ gpio lines on the CPU object
  ...

Message-id: 1377007680-4934-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-08-20 11:23:52 -05:00
Laszlo Ersek
15a849be10 OptsVisitor: don't try to flatten overlong integer ranges
Prevent mistyped command line options from incurring high memory and CPU
usage at startup. 64K elements in a range should be enough for everyone
(TM).

The OPTS_VISITOR_RANGE_MAX macro is public so that unit tests can
construct corner cases with it.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-08-20 11:52:00 -04:00
Anthony Liguori
9176e8fb8f Merge remote-tracking branch 'stefanha/block-next' into staging
# By Stefan Hajnoczi
# Via Stefan Hajnoczi
* stefanha/block-next:
  aio: drop io_flush argument
  tests: drop event_active_cb()
  thread-pool: drop thread_pool_active()
  dataplane/virtio-blk: drop flush_true() and flush_io()
  block/ssh: drop return_true()
  block/sheepdog: drop have_co_req() and aio_flush_request()
  block/rbd: drop qemu_rbd_aio_flush_cb()
  block/nbd: drop nbd_have_request()
  block/linux-aio: drop qemu_laio_completion_cb()
  block/iscsi: drop iscsi_process_flush()
  block/gluster: drop qemu_gluster_aio_flush_cb()
  block/curl: drop curl_aio_flush()
  aio: stop using .io_flush()
  tests: adjust test-thread-pool to new aio_poll() semantics
  tests: adjust test-aio to new aio_poll() semantics
  dataplane/virtio-blk: check exit conditions before aio_poll()
  block: stop relying on io_flush() in bdrv_drain_all()
  block: ensure bdrv_drain_all() works during bdrv_delete()

Message-id: 1376921877-9576-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-08-20 09:52:18 -05:00
Peter Maydell
b643e4b90b hw/arm/pic_cpu: Remove the now-unneeded arm_pic_init_cpu()
Now all the boards have been converted arm_pic_init_cpu()
is unused and can just be deleted.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-15-git-send-email-peter.maydell@linaro.org
2013-08-20 14:54:31 +01:00
Stefan Hajnoczi
f2e5dca46b aio: drop io_flush argument
The .io_flush() handler no longer exists and has no users.  Drop the
io_flush argument to aio_set_fd_handler() and related functions.

The AioFlushEventNotifierHandler and AioFlushHandler typedefs are no
longer used and are dropped too.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-19 15:52:19 +02:00
Eduardo Habkost
8231c2dd22 qom: Introduce instance_post_init hook
This will allow classes to specify a function to be called after all
instance_init functions were called.

This will be used by DeviceState to call qdev_prop_set_globals() at the
right moment.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-16 18:44:33 +02:00
Andreas Färber
35143f0164 gdbstub: Fix gdb_register_coprocessor() register counting
Commit a0e372f0c4 reorganized the register
counting for GDB. While it seems correct not to let the total number of
registers skyrocket in an SMP scenario through a static variable, the
distinction between total register count and 'g' packet register count
(last_reg vs. num_g_regs) got lost among the way.

Fix this by introducing CPUState::gdb_num_g_regs and using that in
gdb_handle_packet().

Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org (stable-1.6)
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-16 18:44:33 +02:00
Paolo Bonzini
6dd2a5c98a pc_sysfw: do not make it a device anymore
Move the code to hw/i386, the sole remaining property is available
as !pci_enabled.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1376069702-22330-4-git-send-email-aliguori@us.ibm.com

Rebased.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-08-12 09:31:14 -05:00
Anthony Liguori
3ee1ee80d2 pci,virtio fixes for 1.6
This includes some last-minute bugfixes for 1.6.
 All very small patches that also look very safe to me.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJSCKrZAAoJECgfDbjSjVRpzWsH/2vJswTENyE1ws/fgs3QIxM/
 YNGpOkxXGtfLB8EgkSchdEFytFidDE7VJZA/maRS3jY1/vZbd54qjlfBSaoWa27l
 eaLMqjr5vdFQXJMn4WS1Fhv2HEiTRame8RxvCkLvv3SU87QzDxbwdvgTNUsDSREJ
 OUBZLqEpyK5mf7e/qdFxxFUWuOGAfbQhMw3A8jYYxNbmczbSvawA/qthTgsXiyW4
 t5Kak2GzQ5W5yLhhe3PhdoD/9XnG0qFKP2ZGha/PcrQjAi+7oCZl2qJ55V5MTHl8
 mh8Q1Qpp/5SDeo6kKNVBQ5ysF9iUbrPxog44LnkVgX4F8/282/birt6VfeyKZbg=
 =U+hn
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pci,virtio fixes for 1.6

This includes some last-minute bugfixes for 1.6.
All very small patches that also look very safe to me.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 12 Aug 2013 04:28:57 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Michael S. Tsirkin (2) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  vhost: clear signalled_used_valid on vhost stop
  virtio: clear signalled_used_valid when switching from dataplane
  i82801b11: Fix i82801b11 PCI host bridge config space
  pc: disable pci-info for 1.6

Message-id: 1376308831-19978-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-08-12 08:32:55 -05:00
Stefan Hajnoczi
6793dfd1b6 virtio: clear signalled_used_valid when switching from dataplane
When the dataplane thread stops, its vring.c implementation synchronizes
vring state back to virtio.c so we can continue emulating the virtio
device.

This patch ensures that virtio.c's signalled_used_valid flag is reset so
that we do not suppress guest notifications due to stale signalled_used
values.

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-12 12:19:04 +03:00
Vincenzo Maffione
ca916d3729 kvm: add KVM_IRQFD_FLAG_RESAMPLE support
Added an EventNotifier* parameter to
kvm-all.c:kvm_irqchip_add_irqfd_notifier(), in order to give KVM
another eventfd to be used as "resamplefd". See the documentation
in the linux kernel sources in Documentation/virtual/kvm/api.txt
(section 4.75) for more details.
When the added parameter is passed NULL, the behaviour of the
function is unchanged with respect to the previous versions.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-08-09 21:19:54 +02:00
Laszlo Ersek
56c4bfb3f0 dump: rebase from host-private RAMBlock offsets to guest-physical addresses
RAMBlock.offset                   --> GuestPhysBlock.target_start
RAMBlock.offset + RAMBlock.length --> GuestPhysBlock.target_end
RAMBlock.length                   --> GuestPhysBlock.target_end -
                                      GuestPhysBlock.target_start

"GuestPhysBlock.host_addr" is only used when writing the dump contents.

This patch enables "crash" to work with the vmcore by rebasing the vmcore
from the left side of the following diagram to the right side:

host-private
offset
relative
to ram_addr   RAMBlock                  guest-visible paddrs
            0 +-------------------+.....+-------------------+ 0
              |         ^         |     |        ^          |
              |       640 KB      |     |      640 KB       |
              |         v         |     |        v          |
  0x0000a0000 +-------------------+.....+-------------------+ 0x0000a0000
              |         ^         |     |XXXXXXXXXXXXXXXXXXX|
              |       384 KB      |     |XXXXXXXXXXXXXXXXXXX|
              |         v         |     |XXXXXXXXXXXXXXXXXXX|
  0x000100000 +-------------------+.....+-------------------+ 0x000100000
              |         ^         |     |        ^          |
              |       3583 MB     |     |      3583 MB      |
              |         v         |     |        v          |
  0x0e0000000 +-------------------+.....+-------------------+ 0x0e0000000
              |         ^         |.    |XXXXXXXXXXXXXXXXXXX|
              | above_4g_mem_size | .   |XXXX PCI hole XXXXX|
              |         v         |  .  |XXXX          XXXXX|
     ram_size +-------------------+   . |XXXX  512 MB  XXXXX|
                                   .   .|XXXXXXXXXXXXXXXXXXX|
                                    .   +-------------------+ 0x100000000
                                     .  |         ^         |
                                      . | above_4g_mem_size |
                                       .|         v         |
                                        +-------------------+ ram_size
                                                              + 512 MB

Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-08-08 11:01:46 -04:00
Laszlo Ersek
c5d7f60f06 dump: populate guest_phys_blocks
While the machine is paused, in guest_phys_blocks_append() we register a
one-shot MemoryListener, solely for the initial collection of the valid
guest-physical memory ranges that happens at listener registration time.

For each range that is reported to guest_phys_blocks_region_add(), we
attempt to merge the range with the preceding one.

Ranges can only be joined if they are contiguous in both guest-physical
address space, and contiguous in host virtual address space.

The "maximal" ranges that remain in the end constitute the guest-physical
memory map that the dump will be based on.

Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-08-08 11:01:46 -04:00
Laszlo Ersek
5ee163e8ea dump: introduce GuestPhysBlockList
The vmcore must use physical addresses that are visible to the guest, not
addresses that point into linear RAMBlocks. As first step, introduce the
list type into which we'll collect the physical mappings in effect at the
time of the dump.

Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-08-08 11:01:46 -04:00
Izumi Tsutsui
79761c6681 semaphore: fix a hangup problem under load on NetBSD hosts.
Fix following bugs in "fallback implementation of counting semaphores
with mutex+condvar" added in c166cb72f1:
 - waiting threads are not restarted properly if more than one threads
   are waiting unblock signals in qemu_sem_timedwait()
 - possible missing pthread_cond_signal(3) calls when waiting threads
   are returned by ETIMEDOUT
 - fix an uninitialized variable
The problem is analyzed by and fix is provided by Noriyuki Soda.

Also put additional cleanup suggested by Laszlo Ersek:
 - make QemuSemaphore.count unsigned (it won't be negative)
 - check a return value of in pthread_cond_wait() in qemu_sem_wait()

Signed-off-by: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1372841894-10634-1-git-send-email-tsutsui@ceres.dti.ne.jp
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-08-05 11:48:00 -05:00
Anthony Liguori
75e2a4baf1 Merge remote-tracking branch 'spice/spice.v72' into staging
# By Gerd Hoffmann
# Via Gerd Hoffmann
* spice/spice.v72:
  spice: fix display initialization

Message-id: 1375173625-3784-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-30 18:48:58 -05:00
Anthony Liguori
dbef7b17ad Merge remote-tracking branch 'borntraeger/s390-for-1.6' into staging
* borntraeger/s390-for-1.6:
  s390: Implement dump-guest-memory support for target s390x
  s390x/kvm: Remove redundant return code
  s390x/kvm: Reworked/fixed handling of cc3 in kvm_handle_css_inst()
  s390x/ioinst: Fixed priority of operand exceptions
  s390x/ioinst: Fixed alignment check in SCHM instruction
  s390x/ioinst: Throw addressing exception when memory_map failed
  s390x/ioinst: Add missing alignment checks for IO instructions
  s390/sclpconsole: handle char layer busy conditions

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-30 18:48:36 -05:00
Michael Roth
7b7ab18d0b chardev: fix CHR_EVENT_OPENED events for mux chardevs
As of bd5c51ee6c, chardevs no longer use
bottom-halves to issue CHR_EVENT_OPENED events. To maintain past
semantics, we instead defer the CHR_EVENT_OPENED events toward the end
of chardev initialization.

For muxes, this isn't good enough, since a range of FEs must be able
to attach to the mux prior to any CHR_EVENT_OPENED being issued, else
each FE will immediately print it's initial output (prompts, banners,
etc.) just prior to us switching to the next FE as part of
initialization.

The is new and confusing behavior for users, as they'll see output for
things like the HMP monitor, even though their the current mux focus
may be a guest serial port with potentially no output.

We fix this by further deferring CHR_EVENT_OPENED events for FEs
associated with muxes until after machine init by flagging mux chardevs
with 'explicit_be_open', which suppresses emission of CHR_EVENT_OPENED
events until we explicitly set the mux as opened later.

Currently, we must defer till after machine init since we potentially
associate FEs with muxes as part of realize (for instance,
serial_isa_realizefn).

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 1375207462-8141-1-git-send-email-mdroth@linux.vnet.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-30 18:48:21 -05:00
Ekaterina Tumanova
9b4f38e182 s390: Implement dump-guest-memory support for target s390x
With this patch dump-guest-memory on s390 produces an ELF formatted,
crash-readable dump.
In order to implement this, the arch-specific part of dump-guest-memory
was added:
target-s390x/arch_dump.c contains the whole set of function for writing
Elf note sections of all types for s390x.

Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
[fixed indentation, use CamelCase, rename note_t to Note, use S390CPU]
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-07-30 16:12:25 +02:00
Gerd Hoffmann
58ae52a8dc spice: fix display initialization
Spice has two display interface implementations:  One integrated into
the qxl graphics card, and one generic which can operate with every
qemu-emulated graphics card.

The generic one is activated in case spice is used without qxl.  The
logic for that only caught the "-vga qxl" case, "-device qxl-vga" goes
unnoticed.  Fix that by adding a check in the spice interface
registration so we'll notice the qxl card no matter how it is created.

https://bugzilla.redhat.com/show_bug.cgi?id=981094

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-07-30 10:25:47 +02:00
Igor Mammedov
3984890181 pc: limit 64 bit hole to 2G by default
It turns out that some 32 bit windows guests crash
if 64 bit PCI hole size is >2G.
Limit it to 2G for piix and q35 by default.
User may override default 64-bit PCI hole size by
using "pci-hole64-size" property.

Examples:
-global i440FX-pcihost.pci-hole64-size=4G

-global q35-pcihost.pci-hole64-size=4G

Reported-by: Igor Mammedov <imammedo@redhat.com>,
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-8-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 19:33:34 -05:00
Vasilis Liaskovitis
e8cd45c78f qdev: Add SIZE type to qdev properties
This patch adds a 'SIZE' type property to qdev.

Signed-off-by: Ian Molton <ian.molton@collabora.co.uk>
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-7-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 19:33:33 -05:00
Michael S. Tsirkin
f5338ee30d pc: move IO_APIC_DEFAULT_ADDRESS to include/hw/i386/ioapic.h
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-2-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 19:33:32 -05:00
Andreas Färber
b67964d702 sysbus: QOM parent field cleanup for SysBusDevice
Rename the parent field and hide it from gtk-doc.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:07:03 +02:00
Andreas Färber
339104fe34 sysbus: Remove unused sysbus_new() prototype
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:07:02 +02:00
Andreas Färber
f3d74d32e7 sysbus: Drop FROM_SYSBUS()
As a replacement, use your own macro based on OBJECT_CHECK().

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:07:02 +02:00
Andreas Färber
29d1ffc3d8 m48t59: QOM cast cleanup for M48t59SysBusState
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:07:01 +02:00
Andreas Färber
a0b97927e3 lm32_juart: QOM cast cleanup
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:28 +02:00
Andreas Färber
0ee10242fd lm32_juart: Relocate and tidy header
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:27 +02:00
Andreas Färber
81069b2054 escc: QOM cast cleanup
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:27 +02:00
Andreas Färber
bcb7575068 pcie_port: Turn PCIEPort and PCIESlot into abstract QOM types
Move PCIEPort's "port" property to the new type, same for "aer_log_max".
Move PCIESlot's "chassis" and "slot" properties to the new type.

Reviewed-by: Don Koch <dkoch@verizon.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 20:45:24 +02:00
Andreas Färber
f055e96bd4 pci-bridge: Turn PCIBridge into abstract QOM type
Introduce TYPE_PCI_BRIDGE as base type and use PCI_BRIDGE() casts.

Reviewed-by: Don Koch <dkoch@verizon.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[AF: Updated pbm-bridge parent to TYPE_PCI_BRIDGE]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 20:44:47 +02:00
Anthony Liguori
eddbf0ab9d Merge remote-tracking branch 'stefanha/block' into staging
# By Stefan Hajnoczi (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
  dataplane: refuse to start if device is already in use
  dataplane: enable virtio-blk x-data-plane=on live migration
  migration: fix spice migration
  migration: notify migration state before starting thread
  block: Repair the throttling code.
  gluster: Add image resize support

Message-id: 1375112172-24863-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 11:33:48 -05:00
Anthony Liguori
4ff1fac430 QOM CPUState refactorings
* Fix x86 cpu-add
 * Change KVM PMU behavior for 1.6
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJR9ooSAAoJEPou0S0+fgE/+04QALXCQnbPGqIJNyAstf8TnOlH
 UzyyLzwnTpifwBDxk97PcCjpWKIoMozqMfyChKycTCvn2DIEKNV9QIGydmp1RXJF
 ILQGX3J8iBPDFGoGWGG41dPJPr1ELwA5An5OylrGnqoGq0u6tIv82Lr+UkDMSq24
 IgUo+dJbJ33qWH2dwB6ctcEZPtqfCseuGBmOoJNHiuYMHvH+G6Rcg+zAP5n8gFTV
 7cKDZ6xCZrAlZVADPUy2XO3PO7kDY3UTUWGvA2MqTjk7u1Hm5hOnY30QZrz4FVTm
 huR+AsDX0B6q5sSDKiZUSPHe0f1f7keGf4/YXOtVTHhANjoMg4NiJp4KMdVjZYmQ
 2zZRudktDEZ8eYmHIqCQ08ZH53D2zkpQ3fvr4hoTS5uDjH6x6pqKvQlcC5RbCDsn
 YZVxeD/NM/aRJb2N4Q4ihnNWMbHMZW6NMijYS7nk+SlU6iGb/7DR3YRgmKvfevtE
 WQVt26n+m+6avPGq+RIJZ9DxrYuESmz1qYFMjbH5deN8kdsHoLQfM1q7y8SJmTeI
 gXT1GVg25qzsmPa7t7nUWWleqn6kBoe9pHhb6xiIG5TNzXQyA+cPEqngxXDRYmxx
 HmSjWoRr0uMN3jVJqDXl9qjayDDGuZ7tiA4iOzhzw34yY3iNGU2QWNXM01ZFsd+5
 06MySKkf6PE94OxFiYo3
 =7lWx
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into staging

QOM CPUState refactorings

* Fix x86 cpu-add
* Change KVM PMU behavior for 1.6

# gpg: Signature made Mon 29 Jul 2013 10:28:18 AM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Eduardo Habkost (2) and Andreas Färber (1)
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
  target-i386: Disable PMU CPUID leaf by default
  target-i386: Pass X86CPU object to cpu_x86_find_by_name()
  cpu: Partially revert "cpu: Change qemu_init_vcpu() argument to CPUState"
2013-07-29 11:33:34 -05:00
Marcel Apfelbaum
3d1237fb2a qemu-help: Sort devices by logical functionality
Categorize devices that appear as output to "-device ?" command
by logical functionality. Sort the devices by logical categories
before showing them to user.

The sort is done by functionality rather than alphabetical.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-3-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:09 -05:00
Marcel Apfelbaum
949fc82314 hw: import bitmap operations in qdev-core header
Made small tweaks in code to prevent compilation issues
when importing qemu/bitmap.h in qdev-core

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-2-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:09 -05:00
Anthony Liguori
c04d6cfa3f xics: rename types to be sane and follow coding style
Basically, in HW the layout of the interrupt network is:

     - One ICP per processor thread (the "presenter"). This contains the
    registers to fetch a pending interrupt (ack), EOI, and control the
    processor priority.

     - One ICS per logical source of interrupts (ie, one per PCI host
    bridge, and a few others here or there). This contains the per-interrupt
    source configuration (target processor(s), priority, mask) and the
    per-interrupt internal state.

    Under PAPR, there is a single "virtual" ICS ... somewhat (it's a bit
    oddball what pHyp does here, arguably there are two but we can ignore
    that distinction). There is no register level access. A pair of firmware
    (RTAS) calls is used to configure each virtual interrupt.

    So our model here is somewhat the same. We have one ICS in the emulated
    XICS which arguably *is* the emulated XICS, there's no point making it a
    separate "device", that would just be gross, and each VCPU has an
    associated ICP.

Yet we call the "XICS" struct icp_state and then the ICPs
'struct icp_server_state'.  It's particularly confusing when all of the
functions have xics_prefixes yet take *icp arguments.

Rename:

  struct icp_state -> XICSState
  struct icp_server_state -> ICPState
  struct ics_state -> ICSState
  struct ics_irq_state -> ICSIRQState

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1374175984-8930-12-git-send-email-aliguori@us.ibm.com
[aik: added ics_resend() on post_load]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:09 -05:00
Alexey Kardashevskiy
e68cb8b4fa pseries: savevm support with KVM
At present, the savevm / migration support for the pseries machine will not
work when KVM is enabled.  That's because KVM manages the guest's hash page
table in the host kernel, so qemu has no visibility of it.  This patch
fixes this by using new kernel interfaces to extract and reinsert the
guest's hash table during the migration process.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 1374175984-8930-11-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:09 -05:00
David Gibson
1112cf94c8 pseries: savevm support for PCI host bridge
This adds the necessary support for saving the state of the PAPR virtual
PCI host bridge (or host bridges).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-10-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:09 -05:00
David Gibson
4be21d561d pseries: savevm support for pseries machine
This adds the necessary pieces to implement savevm / migration for the
pseries machine.  The most complex part here is migrating the hash
table - for the paravirtualized pseries machine the guest's hash page
table is not stored within guest memory, but externally and the guest
accesses it via hypercalls.

This patch uses a hypervisor reserved bit of the HPTE as a dirty bit
(tracking changes to the HPTE itself, not the page it references).
This is used to implement a live migration style incremental save and
restore of the hash table contents.

Normally a hash table is 16MB but it can get bigger depending on how
much RAM the guest has. Due to its nature, updates to it are random so
the live migration style is used for it.

In addition it adds VMStateDescription information to save and restore
the (few) remaining pieces of state information needed by the pseries
machine.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-9-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:08 -05:00
Anthony Liguori
a83000f5e3 spapr-tce: make sPAPRTCETable a proper device
Model TCE tables as a device that's hooked up as a child object to
the owner.  Besides the code cleanup, we get a few nice benefits:

1) free actually works now (it was dead code before)

2) the TCE information is visible in the device tree

3) we can expose table information as properties such that if we
   change the window_size, we can use globals to keep migration
   working.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1374175984-8930-6-git-send-email-aliguori@us.ibm.com
[dwg: pseries: savevm support for PAPR TCE tables]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[alexey: ppc kvm: fix to compile]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:08 -05:00
David Gibson
b368a7d864 pseries: savevm support for VIO devices
This patch adds helpers to allow PAPR VIO devices to save state common
to all VIO devices during savevm.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-3-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:08 -05:00
Stefan Hajnoczi
84db52d059 dataplane: enable virtio-blk x-data-plane=on live migration
Although the dataplane thread does not cooperate with dirty memory
logging yet it's fairly easy to temporarily disable dataplane during
live migration.  This way virtio-blk can live migrate when
x-data-plane=on.

The dataplane thread will restart after migration is cancelled or if the
guest resuming virtio-blk operation after migration completes.

Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-29 17:19:07 +02:00
Stefan Hajnoczi
02edd2e766 migration: fix spice migration
Commit 29ae8a4133 ("rdma: introduce
MIG_STATE_NONE and change MIG_STATE_SETUP state transition") changed the
state transitions during migration setup.

Spice used to be notified with MIG_STATE_ACTIVE and it detected this
using migration_is_active().  Spice is now notified with
MIG_STATE_SETUP and migration_is_active() no longer works.

Replace migration_is_active() with migration_in_setup() to fix spice
migration.

Cc: Michael R. Hines <mrhines@us.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-29 17:19:02 +02:00
Benoît Canet
b681a1c73e block: Repair the throttling code.
The throttling code was segfaulting since commit
02ffb50448 because some qemu_co_queue_next caller
does not run in a coroutine.
qemu_co_queue_do_restart assume that the caller is a coroutinne.
As suggested by Stefan fix this by entering the coroutine directly.
Also make sure like suggested that qemu_co_queue_next() and
qemu_co_queue_restart_all() can be called only in coroutines.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-29 17:07:37 +02:00
Eduardo Habkost
9337e3b6e1 target-i386: Disable PMU CPUID leaf by default
Bug description: QEMU currently gets all bits from GET_SUPPORTED_CPUID
for CPUID leaf 0xA and passes them directly to the guest. This makes
the guest ABI depend on host kernel and host CPU capabilities, and
breaks live migration if we migrate between hosts with different
capabilities (e.g., different number of PMU counters).

Add a "pmu" property to X86CPU, and set it to true only on "-cpu host",
or on pc-*-1.5 and older machine-types.

For now, setting pmu=on will enable the current passthrough mode that
doesn't have any ABI stability guarantees, but in the future we may
implement a mode where the PMU CPUID bits are stable and configurable.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 15:29:16 +02:00
Paul Durrant
8fbab3b62a Xen PV Device
Introduces a new Xen PV PCI device which will act as a binding point for
PV drivers for Xen.
The device has parameterized vendor-id, device-id and revision to allow to
be configured as a binding point for any vendor's PV drivers.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
2013-07-29 11:13:44 +00:00
Aurelien Jarno
461bdb3414 Merge branch 'trivial-patches' of git://git.corpit.ru/qemu
* 'trivial-patches' of git://git.corpit.ru/qemu:
  target-mips: Remove assignment to a variable which is never used
  misc: Use g_assert_not_reached for code which is expected to be unreachable
  qemu-options: mention C-a h in the -nographic doc
  misc: Fix new typos in comments and strings
  linux-user: correct argument number for sys_mremap and sys_splice
  PPC: dbdma: macio: Fix format specifiers (build regression)
  watchdog: Remove break after exit
  exec: Remove env from list of poisoned names
  hw/9pfs: Fix potential memory leak and avoid reuse of freed memory
  timer: make timers_state static
  aes: Remove unused code (NDEBUG, u16)
2013-07-29 09:03:23 +02:00
James Hogan
05b3274b6b hw/mips: align initrd to 64KB to avoid kernel error
The Linux kernel can be configured to use 64KB pages, but it also
requires initrd to be page aligned. Therefore, to be safe, align the
initrd to 64KB using a new INITRD_PAGE_MASK rather than
TARGET_PAGE_MASK.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-29 00:27:35 +02:00
Stefan Weil
0dd60ae2f4 exec: Remove env from list of poisoned names
The global variable env was removed some time ago, so this name may be
used without any restriction now.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-27 11:22:54 +04:00
Anthony Liguori
200a06397f QOM CPUState refactorings
* Fix cpu_memory_rw_debug() breakage in s390x KVM
 * Replace final CPUArchState in sysemu/kvm.h
 * Introduce model subclasses for XtensaCPU
 * Introduce CPUClass::gdb_num[_core]_regs
 * Introduce CPUClass::gdb_core_xml_file
 * Introduce CPUClass::gdb_{read,write}_register()
 * Propagate CPUState further in gdbstub
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJR8vJsAAoJEPou0S0+fgE/ll4QALiUVXNcH8ymDs46JdXfMjyN
 4IqZS8VpgddD0WODLSjY/tE39JYY5K4Zl69Cs8kX/jZBeJk0w7XUZS3y6kvW4a0C
 lVEoxAYn2XE2I0pgJg+F95Z7rzDR/Y0laalkIbqYKjqmvS//KXBUif7Zw+oiqNAE
 sWtq+GqzG0vPiGN/rUGXuny//A/xWbHzZxqtpF4RgVg5eeRQh1acbpgoCwhZ/pJY
 31AGbIfSaXLKfLzXDrKhNbsruSaNxZ0Yc6BG9h/DQDOG9VY0zMIc1xC+IGlWvlAE
 v/AdaOhZP4GGWw4TN8tUR+Or+dD9KQbwkPtNs7bECutJUgRl3u4iE9lEEV8Rosho
 952r/qWPXyiphQ4VjKkG+tphtqj1npiDasKdoxhoQCIk05AXUFdr3XMMMm8+6cXb
 Ex1cKFoqQ+orc8pGn8jZmY7T1douZA0k38siHduEvb+dzMBdDcfbGw646g/deXZQ
 TDtB/pKTrZa7s/JqMXuuppHMmjLFQpRrL7Wmag3VhaVj/fL1oDX/DGIQ/xw8Zkdn
 2W9skac++LHSkcq+rkM1EgMT9AWzAGRrBK31Mz0f726NuKkzO52ZujCvQWQRfHPF
 gJEb1auxa3E6dYwK6ITsOw8j/bq+7gQKihhdQeXdu/EAfE1PZmPnaoqYgIOVuZo6
 j6bF5EgH+9I60+eLPmYT
 =Crvv
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into staging

QOM CPUState refactorings

* Fix cpu_memory_rw_debug() breakage in s390x KVM
* Replace final CPUArchState in sysemu/kvm.h
* Introduce model subclasses for XtensaCPU
* Introduce CPUClass::gdb_num[_core]_regs
* Introduce CPUClass::gdb_core_xml_file
* Introduce CPUClass::gdb_{read,write}_register()
* Propagate CPUState further in gdbstub

# gpg: Signature made Fri 26 Jul 2013 05:04:28 PM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Andreas Färber (23) and others
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony: (25 commits)
  cpu: Introduce CPUClass::gdb_core_xml_file for GDB_CORE_XML
  target-cris: Factor out CPUClass::gdb_read_register() hook for v10
  cpu: Introduce CPUClass::gdb_{read,write}_register()
  gdbstub: Replace GET_REG*() macros with gdb_get_reg*() functions
  target-xtensa: Move cpu_gdb_{read,write}_register()
  target-lm32: Move cpu_gdb_{read,write}_register()
  target-s390x: Move cpu_gdb_{read,write}_register()
  target-alpha: Move cpu_gdb_{read,write}_register()
  target-cris: Move cpu_gdb_{read,write}_register()
  target-microblaze: Move cpu_gdb_{read,write}_register()
  target-sh4: Move cpu_gdb_{read,write}_register()
  target-openrisc: Move cpu_gdb_{read,write}_register()
  target-mips: Move cpu_gdb_{read,write}_register()
  target-m68k: Move cpu_gdb_{read,write}_register()
  target-arm: Move cpu_gdb_{read,write}_register()
  target-sparc: Move cpu_gdb_{read,write}_register()
  target-ppc: Move cpu_gdb_{read,write}_register()
  target-i386: Move cpu_gdb_{read,write}_register()
  cpu: Introduce CPUState::gdb_num_regs and CPUClass::gdb_num_core_regs
  gdbstub: Drop dead code in cpu_gdb_{read,write}_register()
  ...
2013-07-26 17:53:19 -05:00
Andreas Färber
5b24c64188 cpu: Introduce CPUClass::gdb_core_xml_file for GDB_CORE_XML
Replace the GDB_CORE_XML define in gdbstub.c with a CPUClass field.
Use first_cpu for qSupported and qXfer:features:read: for now.
Add a stub for xml_builtin.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-27 00:04:17 +02:00
Andreas Färber
5b50e790f9 cpu: Introduce CPUClass::gdb_{read,write}_register()
Completes migration of target-specific code to new target-*/gdbstub.c.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-27 00:04:17 +02:00
Andreas Färber
986a299893 gdbstub: Replace GET_REG*() macros with gdb_get_reg*() functions
This avoids polluting the global namespace with a non-prefixed macro and
makes it obvious in the call sites that we return.

Semi-automatic conversion using, e.g.,
 sed -i 's/GET_REGL(/return gdb_get_regl(mem_buf, /g' target-*/gdbstub.c
followed by manual tweaking for sparc's GET_REGA() and Coding Style.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-27 00:04:17 +02:00
Anthony Liguori
405c97c3a5 Merge remote-tracking branch 'kwolf/for-anthony' into staging
# By Kevin Wolf (16) and Ian Main (2)
# Via Kevin Wolf
* kwolf/for-anthony:
  Add tests for sync modes 'TOP' and 'NONE'
  Implement sync modes for drive-backup.
  Implement qdict_flatten()
  blockdev: Split up 'cache' option
  blockdev: Rename 'readonly' option to 'read-only'
  qcow2: Use dashes instead of underscores in options
  blockdev: Rename I/O throttling options for QMP
  QemuOpts: Add qemu_opt_unset()
  block: Allow "driver" option on the top level
  qapi: Anonymous unions
  qapi.py: Maintain a list of union types
  qapi: Add consume argument to qmp_input_get_object()
  qapi: Flat unions with arbitrary discriminator
  qapi: Add visitor for implicit structs
  docs: Document QAPI union types
  qapi-visit.py: Implement 'base' for unions
  qapi-visit.py: Split off generate_visit_struct_fields()
  qapi-types.py: Implement 'base' for unions

Message-id: 1374870032-31672-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-26 16:54:19 -05:00
Andreas Färber
a0e372f0c4 cpu: Introduce CPUState::gdb_num_regs and CPUClass::gdb_num_core_regs
CPUState::gdb_num_regs replaces num_g_regs.
CPUClass::gdb_num_core_regs replaces NUM_CORE_REGS.

Allows building gdb_register_coprocessor() for xtensa, too.

As a side effect this should fix coprocessor register numbering for SMP.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-26 23:23:54 +02:00
Stefan Weil
38e478eccf kvm: Change prototype of kvm_update_guest_debug()
Passing a CPUState pointer instead of a CPUArchState pointer eliminates
the last target dependent data type in sysemu/kvm.h.

It also simplifies the code.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-26 23:05:31 +02:00
Ian Main
fc5d3f8432 Implement sync modes for drive-backup.
This patch adds sync-modes to the drive-backup interface and
implements the FULL, NONE and TOP modes of synchronization.

FULL performs as before copying the entire contents of the drive
while preserving the point-in-time using CoW.
NONE only copies new writes to the target drive.
TOP copies changes to the topmost drive image and preserves the
point-in-time using CoW.

For sync mode TOP are creating a new target image using the same backing
file as the original disk image.  Then any new data that has been laid
on top of it since creation is copied in the main backup_run() loop.
There is an extra check in the 'TOP' case so that we don't bother to copy
all the data of the backing file as it already exists in the target.
This is where the bdrv_co_is_allocated() is used to determine if the
data exists in the topmost layer or below.

Also any new data being written is intercepted via the write_notifier
hook which ends up calling backup_do_cow() to copy old data out before
it gets overwritten.

For mode 'NONE' we create the new target image and only copy in the
original data from the disk image starting from the time the call was
made.  This preserves the point in time data by only copying the parts
that are *going to change* to the target image.  This way we can
reconstruct the final image by checking to see if the given block exists
in the new target image first, and if it does not, you can get it from
the original image.  This is basically an optimization allowing you to
do point-in-time snapshots with low overhead vs the 'FULL' version.

Since there is no old data to copy out the loop in backup_run() for the
NONE case just calls qemu_coroutine_yield() which only wakes up after
an event (usually cancel in this case).  The rest is handled by the
before_write notifier which again calls backup_do_cow() to write out
the old data so it can be preserved.

Signed-off-by: Ian Main <imain@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26 22:01:31 +02:00
Kevin Wolf
f660dc6a2e Implement qdict_flatten()
qdict_flatten(): For each nested QDict with key x, all fields with key y
are moved to this QDict and their key is renamed to "x.y". This operation
is applied recursively for nested QDicts.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-07-26 22:01:31 +02:00
Kevin Wolf
0dd6c52663 QemuOpts: Add qemu_opt_unset()
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-07-26 21:10:11 +02:00
Kevin Wolf
69dd62dfd6 qapi: Anonymous unions
The discriminator for anonymous unions is the data type. This allows to
have a union type that allows both of these:

    { 'file': 'my_existing_block_device_id' }
    { 'file': { 'filename': '/tmp/mydisk.qcow2', 'read-only': true } }

Unions like this are specified in the schema with an empty dict as
discriminator. For this example you could take:

    { 'union': 'BlockRef',
      'discriminator': {},
      'data': { 'definition': 'BlockOptions',
                'reference': 'str' } }
    { 'type': 'ExampleObject',
      'data: { 'file': 'BlockRef' } }

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-07-26 21:10:11 +02:00
Kevin Wolf
761d524dbc qapi: Add visitor for implicit structs
These can be used when an embedded struct is parsed and members not
belonging to the struct may be present in the input (e.g. parsing a
flat namespace QMP union, where fields from both the base and one
of the alternative types are mixed in the JSON object)

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-07-26 20:17:15 +02:00
Anthony Liguori
f0ef1cf4d6 Merge remote-tracking branch 'rth/tcg-next' into staging
# By Claudio Fontana (1) and others
# Via Richard Henderson
* rth/tcg-next:
  tcg: Remove temp_buf
  tcg/aarch64: Implement tlb lookup fast path
  tcg/aarch64: implement ldst 12bit scaled uimm offset

Message-id: 1373919944-8521-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-26 13:04:21 -05:00
Anthony Liguori
874ec3c5b3 Merge remote-tracking branch 'riku/linux-user-for-upstream' into staging
* riku/linux-user-for-upstream: (21 commits)
  linux-user: Handle compressed ISA encodings when processing MIPS exceptions
  linux-user: Unlock mmap_lock when resuming guest from page_unprotect
  linux-user: Reset copied CPUs in cpu_copy() always
  linux-user: Fix epoll on ARM hosts
  linux-user: fix segmentation fault passing with h2g(x) != x
  linux-user: Fix pipe syscall return for SPARC
  linux-user: Fix target_stat and target_stat64 for OpenRISC
  linux-user: Avoid conditional cpu_reset()
  configure: Make NPTL non-optional
  linux-user: Enable NPTL for x86-64
  linux-user: Add i386 TLS setter
  linux-user: Clean up handling of clone() argument order
  linux-user: Add missing 'break' in i386 get_thread_area syscall
  linux-user: Enable NPTL for m68k
  linux-user: Enable NPTL for SPARC targets
  linux-user: Enable NPTL for OpenRISC
  linux-user: Move includes of target-specific headers to end of qemu.h
  configure: Enable threading for unicore32-linux-user
  configure: Enable threading on all ppc and mips linux-user targets
  configure: Don't say target_nptl="no" if there is no linux-user target
  ...

Conflicts:
	linux-user/main.c

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25 15:56:06 -05:00
Paolo Bonzini
61fcb62862 isa_mmio: delete
It is not used anymore.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-15-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25 08:12:27 -05:00
Anthony Liguori
f03d07d468 Merge remote-tracking branch 'quintela/migration.next' into staging
# By Michael R. Hines (8) and others
# Via Juan Quintela
* quintela/migration.next:
  migration: add autoconvergence documentation
  Fix real mode guest segments dpl value in savevm
  Fix real mode guest migration
  rdma: account for the time spent in MIG_STATE_SETUP through QMP
  rdma: introduce MIG_STATE_NONE and change MIG_STATE_SETUP state transition
  rdma: allow state transitions between other states besides ACTIVE
  rdma: send pc.ram
  rdma: core logic
  rdma: introduce ram_handle_compressed()
  rdma: bugfix: ram_control_save_page()
  rdma: update documentation to reflect new unpin support

Message-id: 1374590725-14144-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-23 10:57:23 -05:00
Anthony Liguori
3988982c82 QOM CPUState refactorings
* Fix NULL pointer dereference in gdbstub
 * Introduce vaddr type
 * Introduce CPUClass::set_pc()
 * Introduce CPUClass::synchronize_from_tb()
 * Introduce CPUClass::get_phys_page_debug()
 * Introduce CPUClass::memory_rw_debug()
 * Move singlestep_enabled and gdb_regs fields out of CPU_COMMON
 * Adopt CPUState in more APIs
 * Propagate CPUState in gdbstub
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJR7dNJAAoJEPou0S0+fgE/R8IQAKByM7NGK9JCbMuuZgLzbtib
 J1t6cpdn6ghD/qTNUoC6TuCLB0XHlFenfHtLSC9uqMXZPX1i6UZIo2yRA69X2IEu
 NjUU6LdoduEYL0jBkZeBSvx1SgMVwiabR6kvQorpEzmJWXQdRav8aNCQuGEgvIcb
 sv8kA6Jwh0+S4HJm3gGMs/wBSSeVpP3SUB14RiZESIFQpOovP+i1Qs8qTtclYf4j
 P3qxwoUCJy0S9ayQ6bGJKTbVkY4oCgZHQzDJ09rRT3KM0SMto/cfmlks2zynbeak
 6RXa7iJ8UO4AyxcL37Va5QfVx+EKeu6TpMPxEEFqqgoxac9p4QPspvMmCv6XM4Ul
 TGldagWXHnyN9R5p/w6xMWoKizBE2AUPZh/N8CHI0zAvmaz0pfsiOotVEfs5lbi6
 B5At9lgikagLV43Usi090xOIa3sVL5N+lqxm8PB6UlWbdpFPSBU6Vgx9UBbQniAd
 eB0SP5BUaqM5pkoCHXprrOyCLs3rkEflS1/o1jd+LxH1czQXruns1bEKal/PW22m
 a4TmDQd4X0IvgcziJzo5TuwR4cqQWc5REr2M+EnyMsb0oT5bdCoDZc9oSz+uOW3I
 Qs5hMjs2mG1192heO6HF5YwFzv5RT2POXLtjM+eW72zN4uMrOiIsXU+neQUyWb20
 4+RywuU7mCFOX70UisL9
 =AkgR
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into staging

QOM CPUState refactorings

* Fix NULL pointer dereference in gdbstub
* Introduce vaddr type
* Introduce CPUClass::set_pc()
* Introduce CPUClass::synchronize_from_tb()
* Introduce CPUClass::get_phys_page_debug()
* Introduce CPUClass::memory_rw_debug()
* Move singlestep_enabled and gdb_regs fields out of CPU_COMMON
* Adopt CPUState in more APIs
* Propagate CPUState in gdbstub

# gpg: Signature made Mon 22 Jul 2013 07:50:17 PM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Andreas Färber (21) and others
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony: (24 commits)
  linux-user: Use X86CPU property to retrieve CPUID family
  gdbstub: Change gdb_register_coprocessor() argument to CPUState
  cpu: Move gdb_regs field from CPU_COMMON to CPUState
  gdbstub: Change GDBState::{c,g}_cpu and find_cpu() to CPUState
  cpu: Introduce CPUClass::memory_rw_debug() for target_memory_rw_debug()
  exec: Change cpu_memory_rw_debug() argument to CPUState
  cpu: Turn cpu_get_phys_page_debug() into a CPUClass hook
  gdbstub: Change gdb_{read,write}_register() argument to CPUState
  gdbstub: Change gdb_handlesig() argument to CPUState
  gdbstub: Change syscall callback argument to CPUState
  kvm: Change kvm_{insert,remove}_breakpoint() argument to CPUState
  cpu: Change cpu_single_step() argument to CPUState
  gdbstub: Update gdb_handlesig() and gdb_signalled() Coding Style
  cpu: Move singlestep_enabled field from CPU_COMMON to CPUState
  target-alpha: Copy implver to DisasContext
  target-alpha: Copy singlestep_enabled to DisasContext
  cpu: Introduce CPUClass::synchronize_from_tb() for cpu_pc_from_tb()
  target-unicore32: Implement CPUClass::set_pc()
  target-moxie: Implement CPUClass::set_pc()
  target-m68k: Implement CPUClass::set_pc()
  ...
2013-07-23 10:57:04 -05:00
Alexander Graf
732f9e89a1 linux-user: fix segmentation fault passing with h2g(x) != x
When forwarding a segmentation fault into the guest process, we were passing
the host's address directly into the guest process's signal descriptor.

That obviously confused the guest process, since it didn't know what to make
of the (usually 32-bit truncated) address. Passing in h2g(address) makes the
guest process a lot happier.

To make the code more obvious, introduce a h2g_nocheck() macro that does the
same as h2g(), but allows us to convert addresses that may be outside of guest
mapped range into the guest's view of address space.

This fixes java running in arm-linux-user for me.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-23 17:28:28 +03:00
Michael R. Hines
ed4fbd1082 rdma: account for the time spent in MIG_STATE_SETUP through QMP
Using the previous patches, we're now able to timestamp the SETUP
state. Once we have this time, let the user know about it in the
schema.

Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-07-23 13:06:37 +02:00
Michael R. Hines
2da776db48 rdma: core logic
Code that does need to be visible is kept
well contained inside this file and this is the only
new additional file to the entire patch.

This file includes the entire protocol and interfaces
required to perform RDMA migration.

Also, the configure and Makefile modifications to link
this file are included.

Full documentation is in docs/rdma.txt

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-07-23 11:12:00 +02:00
Michael R. Hines
44c3b58cf9 rdma: introduce ram_handle_compressed()
This gives RDMA shared access to madvise() on the destination side
when an entire chunk is found to be zero.

Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-07-23 11:11:59 +02:00
Andreas Färber
22169d415a gdbstub: Change gdb_register_coprocessor() argument to CPUState
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 02:41:33 +02:00
Andreas Färber
eac8b355f0 cpu: Move gdb_regs field from CPU_COMMON to CPUState
Prepares for changing gdb_register_coprocessor() argument to CPUState.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 02:41:33 +02:00
Andreas Färber
f3659eee05 cpu: Introduce CPUClass::memory_rw_debug() for target_memory_rw_debug()
Make inline target_memory_rw_debug() always available and change its
argument to CPUState. Let it check if CPUClass::memory_rw_debug provides
a specialized callback and fall back to cpu_memory_rw_debug() otherwise.

The only overriding implementation is for 32-bit sparc.

This prepares for changing GDBState::g_cpu to CPUState.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 02:41:33 +02:00
Andreas Färber
f17ec444c3 exec: Change cpu_memory_rw_debug() argument to CPUState
Propagate X86CPU in kvmvapic for simplicity.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 02:41:33 +02:00
Andreas Färber
00b941e581 cpu: Turn cpu_get_phys_page_debug() into a CPUClass hook
Change breakpoint_invalidate() argument to CPUState alongside.

Since all targets now assign a softmmu-only field, we can drop helpers
cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd().

Prepares for changing cpu_memory_rw_debug() argument to CPUState.

Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 02:41:33 +02:00
Andreas Färber
db6b81d436 gdbstub: Change gdb_handlesig() argument to CPUState
Prepares for changing GDBState::c_cpu to CPUState.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 02:41:33 +02:00
Andreas Färber
9e0c5422cf gdbstub: Change syscall callback argument to CPUState
Callback implementations were specific to arm and m68k, so can easily
cast to ARMCPU and M68kCPU respectively.

Prepares for changing GDBState::c_cpu to CPUState.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 02:41:32 +02:00
Andreas Färber
6227881415 kvm: Change kvm_{insert,remove}_breakpoint() argument to CPUState
CPUArchState is no longer directly used since converting CPU loops to
CPUState.

Prepares for changing GDBState::c_cpu to CPUState.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 02:41:32 +02:00
Andreas Färber
3825b28ff1 cpu: Change cpu_single_step() argument to CPUState
Use CPUState::env_ptr for now.

Needed for GdbState::c_cpu.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 02:41:32 +02:00
Andreas Färber
ed2803da58 cpu: Move singlestep_enabled field from CPU_COMMON to CPUState
Prepares for changing cpu_single_step() argument to CPUState.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 02:41:32 +02:00
Andreas Färber
bdf7ae5bbd cpu: Introduce CPUClass::synchronize_from_tb() for cpu_pc_from_tb()
Where no extra implementation is needed, fall back to CPUClass::set_pc().

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 02:41:32 +02:00
Andreas Färber
f45748f10e cpu: Introduce CPUClass::set_pc() for gdb_set_cpu_pc()
This moves setting the Program Counter from gdbstub into target code.
Use vaddr type as upper-bound replacement for target_ulong.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 02:41:31 +02:00
Andreas Färber
577f42c0e1 cpu: Introduce vaddr type
vaddr is to target_ulong what uintmax_t is to unsigned int.

Its purpose is to allow turning per-target functions with target_ulong
arguments into CPUClass hooks.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 02:41:31 +02:00
Andreas Färber
caad4eb345 scsi: Improve error propagation for scsi_bus_legacy_handle_cmdline()
Let scsi_bus_legacy_add_drive() and scsi_bus_legacy_handle_cmdline()
return an Error**. Prepare qdev initfns for QOM realize error model.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:35 +02:00
Hu Tao
ce88812f57 q35: Use type-safe cast instead of direct access of parent dev
And remove variables if possible.

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[AF: Converted remaining access and renamed to parent_obj]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:34 +02:00
Hu Tao
ce7243986f sysbus: Document SysBusDeviceClass::init and realize semantics
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[AF: Syntax and wording changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:34 +02:00
Peter Maydell
2dc6bebde9 bitops: Provide sextract32() and sextract64()
A common operation in instruction decoding is to take a field
from an instruction that represents a signed integer in some
arbitrary number of bits, and sign extend it into a C signed
integer type for manipulation. Provide new functions sextract32()
and sextract64() which perform this operation; they are like
the existing extract32() and extract64() except that the field
is sign-extended into the returned result.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1372419632-5521-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-22 15:41:11 -05:00
Peter Maydell
24cb36a61c configure: Make NPTL non-optional
Now all linux-user targets support building with NPTL, we can make it
mandatory. This is a good idea because:
 * NPTL is no longer new and experimental; it is completely standard
 * in practice, linux-user without NPTL is nearly useless for
   binaries built against non-ancient glibc
 * it allows us to delete the rather untested code for handling
   the non-NPTL configuration

Note that this patch leaves the CONFIG_USE_NPTL ifdefs in the
bsd-user codebase alone. This makes no change for bsd-user, since
our configure test for NPTL had a "#include <linux/futex.h>"
which means bsd-user would never have been compiled with
CONFIG_USE_NPTL defined, and it still is not.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22 21:54:52 +03:00
Anthony Liguori
549c272b3c arm-devs queue
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABCAAGBQJR7RnMAAoJEDwlJe0UNgze9BQP/iuj/QKrw71vrMMCHlrzqjRc
 WXNaGkGHGaRw1r1X/XSiEqI3Ti2frHhsJ+annso4Q3forfGCbnB1Qaqvs/KzQW09
 KQBK3b2AZ9m4b35ZpZYpmbNaIS60XVV1VVB9tshXKJgyYObGlHRWj8MpepSrl3Rr
 texchdyNgZnqCS7Ep6oxzaR2bLqcr1Mi8+NG4dLJfw/z8BREPasQfxOYQoKxDVKV
 Cg2gd31ZAVzqJXtUuwdtkuM7JddfOnGk/MfDkZEBFhQ/fnRE5GSGYTuOHQp9hYdt
 bKnJbT0tqorP5+xg4dzVTqOJ+TsWm+ZfQrzQzkWSM34msYSoohCsF3/BA3xkF3/9
 6iE4ZfHrM6R/XO3A61NbtE9CvhFq9YsLPq7TcAAEzapBFXZlQAGCbZNJlGqn72p1
 XSTFwB02c2+gOXhhUtCwh0OKVbX79J99TQkBR1bEXr3C0yokxa0bIy7kJy+X2+vF
 NOMzoWhEteylZn18tvDfjPCXXzO4kJ8+3sYtvyYAWRadG1QcCq+8xMwUgcVQgmnM
 3TO2r+i4Cs+Ut9m6krW3P3ctL4cCoZj4bDqOu/8Fd7OVBK6u6LtXwej6LoiIDSPD
 3D2Bns65EhEZVucoObgNxG2h+JFLcLm3qRKY51VxD0lJh4Nn90jo317I43FHWONe
 HZZqqO8yPPf7LG/QGTzA
 =AvPS
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'pmaydell/tags/pull-arm-devs-20130722' into staging

arm-devs queue

# gpg: Signature made Mon 22 Jul 2013 06:38:52 AM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found

# By Peter Maydell (8) and Soren Brinkmann (2)
# Via Peter Maydell
* pmaydell/tags/pull-arm-devs-20130722:
  hw/arm: Use 'load_ramdisk()' for loading ramdisks w/ U-Boot header
  hw/loader: Support ramdisk with u-boot header
  vexpress: Add virtio-mmio transports
  vexpress: Make VEDBoardInfo extend arm_boot_info
  arm/boot: Allow boards to modify the FDT blob
  virtio: Implement MMIO based virtio transport
  virtio: Support transports which can specify the vring alignment
  virtio: Add support for guest setting of queue size
  arm/boot: Use qemu_devtree_setprop_sized_cells()
  device_tree: Add qemu_devtree_setprop_sized_cells() utility functions

Message-id: 1374493427-3254-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-22 10:14:24 -05:00
Soren Brinkmann
84aee0deae hw/loader: Support ramdisk with u-boot header
Introduce 'load_ramdisk()' which can load "normal" ramdisks and ramdisks
with a u-boot header.
To enable this and leverage synergies 'load_uimage()' is refactored to
accomodate this additional use case.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373323202-17083-2-git-send-email-soren.brinkmann@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-22 12:00:56 +01:00
Peter Maydell
3b1cceb8b5 arm/boot: Allow boards to modify the FDT blob
Add a callback hook in arm_boot_info to allow board models to
modify the device tree blob if they need to. (The major expected
use case is to add virtio-mmio nodes for virtio-mmio transports
that exist in QEMU but not in the hardware.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-7-git-send-email-peter.maydell@linaro.org
2013-07-19 12:58:47 +01:00
Peter Maydell
6ce69d1c77 virtio: Support transports which can specify the vring alignment
Support virtio transports which can specify the vring alignment
(ie where the guest communicates this to the host) by providing
a new virtio_queue_set_align() function. (The default alignment
remains as before.)

Transports which wish to make use of this must set the
has_variable_vring_alignment field in their VirtioBusClass
struct to true; they can then change the alignment via
virtio_queue_set_align().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-5-git-send-email-peter.maydell@linaro.org
2013-07-19 12:58:46 +01:00
Peter Maydell
e63c0ba1bc virtio: Add support for guest setting of queue size
The MMIO virtio transport spec allows the guest to tell the host how
large the queue size is. Add virtio_queue_set_num() function which
implements this in the QEMU common virtio support code.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-4-git-send-email-peter.maydell@linaro.org
2013-07-19 12:58:46 +01:00
Peter Maydell
97c38f8c27 device_tree: Add qemu_devtree_setprop_sized_cells() utility functions
We already have a qemu_devtree_setprop_cells() which sets a dtb
property to an array of cells whose values are specified by varargs.
However for the fairly common case of setting a property to a list
of addresses or of address,size pairs the number of cells used by
each element in the list depends on the parent's #address-cells
and #size-cells properties. To make this easier we provide an analogous
qemu_devtree_setprop_sized_cells() macro which allows the number
of cells used by each element to be specified. This is implemented
using an underlying qemu_devtree_setprop_sized_cells_from_array()
function which takes the values and sizes as an array; this may
also be directly useful for cases where the cell contents are
constructed programmatically.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1373977512-28932-2-git-send-email-peter.maydell@linaro.org
2013-07-19 12:58:46 +01:00
Peter Lieven
323004a39d block-migration: efficiently encode zero blocks
this patch adds a efficient encoding for zero blocks by
adding a new flag indicating a block is completely zero.

additionally bdrv_write_zeros() is used at the destination
to efficiently write these zeroes. depending on the implementation
this avoids that the destination target gets fully provisioned.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19 12:29:21 +08:00
Peter Lieven
4105eaaab9 block: add bdrv_write_zeroes()
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19 12:29:21 +08:00
Liu Ping Fan
dcc772e2f2 QEMUBH: make AioContext's bh re-entrant
BH will be used outside big lock, so introduce lock to protect
between the writers, ie, bh's adders and deleter. The lock only
affects the writers and bh's callback does not take this extra lock.
Note that for the same AioContext, aio_bh_poll() can not run in
parallel yet.

Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19 12:29:21 +08:00
Stefan Hajnoczi
9154b02c53 dataplane: sync virtio.c and vring.c virtqueue state
Load the virtio.c state into vring.c when we start dataplane mode and
vice versa when stopping dataplane mode.  This patch makes it possible
to start and stop dataplane any time while the guest is running.

This will eventually allow us to go back to QEMU main loop for
bdrv_drain_all() and live migration.  In the meantime, this patch makes
the dataplane lifecycle more robust but should make no visible
difference.  It may be useful in the virtio-net dataplane effort.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19 12:29:21 +08:00
Anthony Liguori
e9acb8cea9 pci,net,pc enhancements
This includes some fixes and enhancements that accumulated in my tree:
 pci fixes by dkoch, virtio-net enhancements by akong and mst,
 and a fix for xen pc by mst.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJR5meNAAoJECgfDbjSjVRp24IIAMOkxbb85FJ323G/x5cQBzA/
 gjFDmvB6geIMBorX1YZRnIM+RFhx+mkXtBTu2raWVTNTt5G2u3vAQQWW2zSiOTBL
 gH4BhzJnUoqLHOydWql2MsGS7DMQo4Fq8OnzRBkZ119AEEqNMad1w2LykwFWs4ra
 k3bsPNCZM+ZNiLMWtQLOcD3FYvoiISinqFd81KOnxvDiT90rczk4dLWqjv8smNif
 WqZ7aCD1hGJ5yD7JI2YjCbhVvu4F7tBK+fWkT/O3oYslh/o241lyxUriOXMKdKML
 04sNXa5eWue9cOKlbo1G+yfFwFg1JDsAMe/Usg0KXz1MMK91wiWE763ESPbFBK0=
 =P+pr
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pci,net,pc enhancements

This includes some fixes and enhancements that accumulated in my tree:
pci fixes by dkoch, virtio-net enhancements by akong and mst,
and a fix for xen pc by mst.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 17 Jul 2013 04:44:45 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Don Koch (2) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  pc: don't access fw cfg if NULL
  virtio-net: add feature bit for any header s/g
  net: add support of mac-programming over macvtap in QEMU side
  pci: fix BRDIGE typo
  pci-bridge: update mappings for migration/restore

Message-id: 1374054430-21966-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-18 08:12:47 -05:00
Richard Henderson
f290e4988d Merge git://github.com/hw-claudio/qemu-aarch64-queue into tcg-next 2013-07-15 13:21:10 -07:00
Richard Henderson
a28177820a tcg: Remove temp_buf
All targets have been converted to allocating space for temporaries
on the stack.  No need to allocate space within the CPU_COMMON block.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-07-15 13:16:20 -07:00
Anthony Liguori
6453a3a694 Merge remote-tracking branch 'quintela/migration.next' into staging
# By Chegu Vinod
# Via Juan Quintela
* quintela/migration.next:
  Force auto-convegence of live migration
  Add 'auto-converge' migration capability
  Introduce async_run_on_cpu()

Message-id: 1373664508-5404-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-15 14:49:16 -05:00
Michael S. Tsirkin
488f069bd1 virtio-net: add feature bit for any header s/g
Old qemu versions required that 1st s/g entry is the header.

Since QEMU 1.5, patchset titled "virtio-net: iovec handling cleanup"
removed this limitation but a feature bit is needed so guests know it's
safe to lay out header differently.

This patch applies on top and adds such a feature bit to QEMU.
It is set by default for virtio-net.
virtio net header inline with the data is beneficial
for latency and small packet bandwidth - guest driver
code utilizing this feature has been acked but missed 3.11
by a narrow margin, it's pending for 3.12.

This feature bit is cleared by default when compatibility with old
machine types is requested.

Other performance-sensitive devices (blk and scsi)
don't yet support arbitrary s/g layouts, so
we only set this bit for virtio-net for now.
There are plans to allow arbitrary layouts there, but
no code has been posted yet.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-15 21:26:26 +03:00
Amos Kong
b1be42803b net: add support of mac-programming over macvtap in QEMU side
Currently macvtap based macvlan device is working in promiscuous
mode, we want to implement mac-programming over macvtap through
Libvirt for better performance.

Design:
 QEMU notifies Libvirt when rx-filter config is changed in guest,
 then Libvirt query the rx-filter information by a monitor command,
 and sync the change to macvtap device. Related rx-filter config
 of the nic contains main mac, rx-mode items and vlan table.

This patch adds a QMP event to notify management of rx-filter change,
and adds a monitor command for management to query rx-filter
information.

Test:
 If we repeatedly add/remove vlan, and change macaddr of vlan
 interfaces in guest by a loop script.

Result:
 The events will flood the QMP client(management), management takes
 too much resource to process the events.

 Event_throttle API (set rate to 1 ms) can avoid the events to flood
 QMP client, but it could cause an unexpected delay (~1ms), guests
 guests normally expect rx-filter updates immediately.

 So we use a flag for each nic to avoid events flooding, the event
 is emitted once until the query command is executed. The flag
 implementation could not introduce unexpected delay.

There maybe exist an uncontrollable delay if we let Libvirt do the
real change, guests normally expect rx-filter updates immediately.
But it's another separate issue, we can investigate it when the
work in Libvirt side is done.

Michael S. Tsirkin: tweaked to enable events on start
Michael S. Tsirkin: fixed not to crash when no id
Michael S. Tsirkin: fold in patch:
   "additional fixes for mac-programming feature"
Amos Kong: always notify QMP client if mactable is changed
Amos Kong: return NULL list if no net client supports rx-filter query

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-15 21:23:08 +03:00
Jani Kokkonen
c6d8ed24b4 tcg/aarch64: Implement tlb lookup fast path
Supports CONFIG_QEMU_LDST_OPTIMIZATION

Signed-off-by: Jani Kokkonen <jani.kokkonen@huawei.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2013-07-15 13:13:46 +02:00
Kevin Wolf
5698346391 cpus: Add return value for vm_stop()
If flushing the block devices fails, return an error. The VM is stopped
anyway.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-15 09:51:38 +02:00
Kevin Wolf
f0f0fdfeec block: Add return value for bdrv_flush_all()
bdrv_flush() can fail, and bdrv_flush_all() should return an error as
well if this happens for a block device. It returns the first error
return now, but still at least tries to flush the remaining devices even
in error cases.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-15 09:51:27 +02:00
Kevin Wolf
98289620e0 block: Don't parse protocol from file.filename
One of the major reasons for doing something new for -blockdev and
blockdev-add was that the old block layer code parses filenames instead
of just taking them literally. So we should really leave it untouched
when it's passing using the new interfaces (like -drive
file.filename=...).

This allows opening relative file names that contain a colon.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-07-15 09:49:00 +02:00
Chegu Vinod
bde1e2ec21 Add 'auto-converge' migration capability
The auto-converge migration capability allows the user to specify if they
choose live migration seqeunce to automatically detect and force convergence.

Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-07-12 20:34:58 +02:00
Chegu Vinod
3c02270db9 Introduce async_run_on_cpu()
Introduce an asynchronous version of run_on_cpu() i.e. the caller
doesn't have to block till the call back routine finishes execution
on the target vcpu.

Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-07-12 19:36:01 +02:00
Alexander Graf
80fc95d8bd PPC: dbdma: Support unaligned DMA access
The DBDMA engine really just reads bytes from a producing device (IDE
in our case) and shoves these bytes into memory. It doesn't care whether
any alignment takes place or not.

Our code today however assumes that block accesses always happen on
sector (512 byte) boundaries. This is a fair assumption for most cases.

However, Mac OS X really likes to do unaligned, incomplete accesses
that it finishes with the next DMA request.

So we need to read / write the unaligned bits independent of the actual
asynchronous request, because that one can only handle 512-byte-aligned
data. We also need to cache these unaligned sectors until the next DMA
request, at which point the data might be successfully flushed from the
pipe.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11 18:51:25 +02:00
Alexander Graf
03ee3b1e58 PPC: dbdma: Move processing to io
Soon we will introduce intermediate processing pauses which will
allow the bottom half to restart a DMA request that couldn't be
fulfilled yet.

For that to work, move the processing variable into the io struct
which is what DMA providers work with.

While touching it, also change it into a bool

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11 18:51:25 +02:00
Alexander Graf
d2f0ce2189 PPC: dbdma: Move static bh variable to device struct
The DBDMA controller has a bottom half to asynchronously process DMA
request queues.

This bh was stored as a gross static variable. Move it into the device
struct instead.

While at it, move all users of it to the new generic kick function.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11 18:51:24 +02:00
Alexander Graf
d1e562deb2 PPC: dbdma: Introduce kick function
The DBDMA engine really is running all the time, waiting for input. However
we don't want to waste cycles constantly polling.

So introduce a kick function that data providers can call to notify the
DBDMA controller of new input.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11 18:51:24 +02:00
Alexander Graf
f2f963fd07 PPC: dbdma: Move defines into header file
We usually keep struct and constant definitions in header files. Move
them there to stay consistent and to make access to fields easier.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11 18:51:24 +02:00
Seiji Aguchi
5e2ac51917 add timestamp to error_report()
[Issue]
When we offer a customer support service and a problem happens
in a customer's system, we try to understand the problem by
comparing what the customer reports with message logs of the
customer's system.

In this case, we often need to know when the problem happens.

But, currently, there is no timestamp in qemu's error messages.
Therefore, we may not be able to understand the problem based on
error messages.

[Solution]
Add a timestamp to qemu's error message logged by
error_report() with g_time_val_to_iso8601().

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-07-10 13:42:09 -04:00
Anthony Liguori
51455c59dd QOM CPUState refactorings
* Fix for OpenRISCCPU subclasses
 * Fix for gdbstub CPU selection
 * Move linux-user CPU functions into new header
 * CPUState part 10 refactoring: first_cpu, next_cpu, cpu_single_env et al.
 * Fix some targets to consistently inline TCG code generation
 * Centrally log CPU reset
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJR3VkXAAoJEPou0S0+fgE/KFQP/3eUyCzZ6QmUG3gmrnfYRDMH
 uwMstD1JRUc5kTEC2bMtld8zZKwx2kxMJpe5fizig8GaLka0J5U2wyvwskkX27ag
 7ouNwFdD/dOmvaKfcqHYKbA3CTuIrbnMm7nzrXpLnWXCiMlW1XmXttQsb3hoAjjt
 asFxQIHONNIgqpcJBrz/C6XX2bEkLra4s2QlXPE5Bl3QkKTtK9+NYahHtgIk3Y7Y
 fqbAxebNGh9eZ9PKjPExhNBZ17Yi4ciM7UB7yrXFYOfwKSpmmTsJdu/m776b1oAK
 c/zWO0uea+sLsMnibnSD1foeeZJItDQDRid+PjC44zB5kS8pkPcT5+TVB04Zilap
 rhNF2Fox+fe8eIc/2WuY3ZGchVjrD/EPbFFCCRQ/qI3Nb98WfLCDu3pAP1hRdo+p
 P6qCH5JmWYcR+2gp8MHY0NtqcklL8A2HpQTRvX1mUliMJbE+unanT4nmKolOTYrm
 +6jvp72GkmqqaLQDQ0d8ig/GmcI9QeftSFD5Y8p5prPsMkQbOAbOUSBlPgwY+Syl
 QmP8xNNzbj00UF8GvRL/m9O75geis/I+op5E7hJqaO5U1yd+ww5Z1EFvDEkUOeYu
 BclqCg1jTnzBzE/FaRP0NWFAUDR+4Z0tumdRES1cDfaMJr3+pYT7y8tjVZn7PEvn
 Ljq+/pyyiunG3Mbvw2o8
 =lFBU
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into staging

QOM CPUState refactorings

* Fix for OpenRISCCPU subclasses
* Fix for gdbstub CPU selection
* Move linux-user CPU functions into new header
* CPUState part 10 refactoring: first_cpu, next_cpu, cpu_single_env et al.
* Fix some targets to consistently inline TCG code generation
* Centrally log CPU reset

# gpg: Signature made Wed 10 Jul 2013 07:52:39 AM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Andreas Färber (41) and others
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony: (43 commits)
  cpu: Move reset logging to CPUState
  target-ppc: Change LOG_MMU_STATE() argument to CPUState
  target-i386: Change LOG_PCALL_STATE() argument to CPUState
  log: Change log_cpu_state[_mask]() argument to CPUState
  target-i386: Change do_smm_enter() argument to X86CPU
  target-i386: Change do_interrupt_all() argument to X86CPU
  target-xtensa: Change gen_intermediate_code_internal() arg to XtensaCPU
  target-unicore32: Change gen_intermediate_code_internal() signature
  target-sparc: Change gen_intermediate_code_internal() argument to SPARCCPU
  target-sh4: Change gen_intermediate_code_internal() argument to SuperHCPU
  target-s390x: Change gen_intermediate_code_internal() argument to S390CPU
  target-ppc: Change gen_intermediate_code_internal() argument to PowerPCCPU
  target-mips: Change gen_intermediate_code_internal() argument to MIPSCPU
  target-microblaze: Change gen_intermediate_code_internal() argument types
  target-m68k: Change gen_intermediate_code_internal() argument to M68kCPU
  target-lm32: Change gen_intermediate_code_internal() argument to LM32CPU
  target-i386: Change gen_intermediate_code_internal() argument to X86CPU
  target-cris: Change gen_intermediate_code_internal() argument to CRISCPU
  target-arm: Change gen_intermediate_code_internal() argument to ARMCPU
  target-alpha: Change gen_intermediate_code_internal() argument to AlphaCPU
  ...
2013-07-10 10:54:16 -05:00
Don Koch
4268b09627 pci: fix BRDIGE typo
Fix typo in macro name: PCI_CLASS_BRDIGE_PCI_INF_SUB.

Signed-off-by: Don Koch <dkoch@verizon.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-10 12:49:33 +03:00
Don Koch
e78e9ae4a9 pci-bridge: update mappings for migration/restore
Fix for LP#1187529: Devices on PCI bridge stop working when
live-migrated. Update bridge mappings for all PCI bridge
devices in get_pci_config_device().

Signed-off-by: Don Koch <dkoch@verizon.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-10 12:49:26 +03:00
Andreas Färber
91b1df8cf9 cpu: Move reset logging to CPUState
x86 was using additional CPU_DUMP_* flags, so make that configurable in
CPUClass::reset_dump_flags.

This adds reset logging for alpha, unicore32 and xtensa.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09 21:33:04 +02:00
Andreas Färber
a0762859ae log: Change log_cpu_state[_mask]() argument to CPUState
Since commit 878096eeb2 (cpu: Turn
cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no
longer needed.

Add documentation and make the functions available through qemu/log.h
outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h
was not yet possible due to convoluted include paths, so that some
devices grow an implicit and unneeded dependency on qom/cpu.h for now.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: Richard Henderson <rth@twiddle.net>
[AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09 21:33:04 +02:00
Andreas Färber
2b927571cc intc/openpic: Build openpic only once
Since current_cpu is CPUState it no longer depends on CPUPPCState.

Move ppce500_set_mpic_proxy() to a new hw/ppc/ppc_e500.h because
hw/ppc/ppc.h is too heavily using CPUPPCState and PowerPCCPU.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09 21:33:02 +02:00
Andreas Färber
182735efaf cpu: Make first_cpu and next_cpu CPUState
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.

gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09 21:32:54 +02:00
Andreas Färber
1d5791f4a6 kvm: Change kvm_remove_all_breakpoints() argument to CPUState
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09 21:20:28 +02:00
Andreas Färber
4917cf4432 cpu: Replace cpu_single_env with CPUState current_cpu
Move it to qom/cpu.h.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09 21:20:28 +02:00
Andreas Färber
80b7cd7354 kvm: Free current_cpu identifier
Since CPU loops are done as last step in kvm_{insert,remove}_breakpoint()
and kvm_remove_all_breakpoints(), we do not need to distinguish between
invoking CPU and iterated CPUs and can thereby free the identifier for
use as a global variable.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09 21:20:28 +02:00
Markus Armbruster
7f9d6e540e vl: New qemu_get_machine_opts()
To be used in the next few commits to fix or clean up queries of
"machine" options (-machine and its sugared forms).

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-09 13:38:57 -05:00
Stefan Weil
154bb106dc exec: Remove unused global variable phys_ram_fd
It seems to be unused since several years (commit
be995c2764 in 2006).

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1373044036-14443-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-09 13:38:56 -05:00
Anthony Liguori
dc11549ec2 pci,misc enhancements
This includes some pci enhancements:
 
 Better support for systems with multiple PCI root buses
 FW cfg interface for more robust pci programming in BIOS
 Minor fixes/cleanups for fw cfg and cross-version migration -
     because of dependencies with other patches
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJR2ctmAAoJECgfDbjSjVRpQpAH/Rk00yLrQ2R5ScNa8AL9LeaJ
 gVFndBmmuRz4gdhyATx6lzR98ic32iTr0+YR5mL51btgmM5a0bEd/SIu34nXriWj
 PsM0wdXfo/oEygdttxhvzJOH17tohRV9xg2WA2d8BEwDzrDyqoQ4J0VJlHlG7u3W
 nq4KVDVUpLNQFKG8ZgJ2vW0WMw/mBSj2rluhQUALhcuvChphtvAFZ2rsSfJr6bzD
 aBELrtIvfLvPGN/0WVeYs9qlp4EE03H3X6gN61QvV3/YElxubKUV5XyMDOX2dW3D
 2j0NQi84LYHn0SFap2r/Kgm47/F6Q56SFk5lrgZrg60mhQTwocw7PfL8CGxjXRI=
 =gxxc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pci,misc enhancements

This includes some pci enhancements:

Better support for systems with multiple PCI root buses
FW cfg interface for more robust pci programming in BIOS
Minor fixes/cleanups for fw cfg and cross-version migration -
    because of dependencies with other patches

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Sun 07 Jul 2013 03:11:18 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By David Gibson (10) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  pci: Fold host_buses list into PCIHostState functionality
  pci: Remove domain from PCIHostBus
  pci: Simpler implementation of primary PCI bus
  pci: Add root bus parameter to pci_nic_init()
  pci: Add root bus argument to pci_get_bus_devfn()
  pci: Replace pci_find_domain() with more general pci_root_bus_path()
  pci: Use helper to find device's root bus in pci_find_domain()
  pci: Abolish pci_find_root_bus()
  pci: Move pci_read_devaddr to pci-hotplug-old.c
  pci: Cleanup configuration for pci-hotplug.c
  pvpanic: fix fwcfg for big endian hosts
  pvpanic: initialization cleanup
  MAINTAINERS: s/Marcelo/Paolo/
  e1000: cleanup process_tx_desc
  pc_piix: cleanup init compat handling
  pc: pass PCI hole ranges to Guests
  pci: store PCI hole ranges in guestinfo structure
  range: add Range structure

Message-id: 1373228271-31223-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-08 08:00:23 -05:00
David Gibson
7588e2b055 pci: Fold host_buses list into PCIHostState functionality
The host_buses list is an odd structure - a list of pointers to PCI root
buses existing in parallel to the normal qdev tree structure.  This patch
removes it, instead putting the link pointers into the PCIHostState
structure, which have a 1:1 relationship to PCIHostBus structures anyway.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-07 23:10:57 +03:00
David Gibson
29b358f93a pci: Add root bus parameter to pci_nic_init()
At present, pci_nic_init() and pci_nic_init_nofail() assume that they will
only create a NIC under the primary PCI root.  As we add support for
multiple PCI roots, that may no longer be the case.  This patch adds a root
bus parameter to pci_nic_init() (and updates callers accordingly) to allow
the machine init code using it to specify the right PCI root for NICs
created by old-style -net nic parameters.  NICs created new-style, with
-device can of course be put anywhere.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-07 23:10:57 +03:00
David Gibson
85c6e4fabb pci: Add root bus argument to pci_get_bus_devfn()
pci_get_bus_devfn() interprets a full PCI address string to give a PCIBus *
and device/function number within that bus.  Currently it assumes it is
working on an address under the primary PCI root bus.  This patch extends
it to allow the caller to specify a root bus.  This might seem a little odd
since the supplied address can (theoretically) include a PCI domain number.
However, attempting to use a non-zero domain number there is currently an
error, so that shouldn't really cause problems.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-07 23:10:57 +03:00
David Gibson
568f0690fd pci: Replace pci_find_domain() with more general pci_root_bus_path()
pci_find_domain() is used in a number of places where we want an id for a
whole PCI domain (i.e. the subtree under a PCI root bus).  The trouble is
that many platforms may support multiple independent host bridges with no
hardware supplied notion of domain number.

This patch, therefore, replaces calls to pci_find_domain() with calls to
a new pci_root_bus_path() returning a string.  The new call is implemented
in terms of a new callback in the host bridge class, so it can be defined
in some way that's well defined for the platform.  When no callback is
available we fall back on the qbus name.

Most current uses of pci_find_domain() are for error or informational
messages, so the change in identifiers should be harmless.  The exception
is pci_get_dev_path(), whose results form part of migration streams.  To
maintain compatibility with old migration streams, the PIIX PCI host is
altered to always supply "0000" for this path, which matches the old domain
number (since the code didn't actually support domains other than 0).

For the pseries (spapr) PCI bridge we use a different platform-unique
identifier (pseries machines can routinely have dozens of PCI host
bridges).  Theoretically that breaks migration streams, but given that we
don't yet have migration support for pseries, it doesn't matter.

Any other machines that have working migration support including PCI
devices will need to be updated to maintain migration stream compatibility.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-07 23:10:57 +03:00
David Gibson
c473d18da1 pci: Use helper to find device's root bus in pci_find_domain()
Currently pci_find_domain() performs two functions - it locates the PCI
root bus above the given bus, then looks up that root bus's domain number.
This patch adds a helper function to perform the first task, finding the
root bus for a given PCI device.  This is then used in pci_find_domain().
This changes pci_find_domain()'s signature slightly, taking a PCIDevice
instead of a PCIBus - since all callers passed something of the form
dev->bus, this simplifies things slightly.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-07 23:10:57 +03:00
David Gibson
1ef7a2a2af pci: Abolish pci_find_root_bus()
pci_find_root_bus() takes a domain parameter.  Currently PCI root buses
with domain other than 0 can't be created, so this is more or less a long
winded way of retrieving the main PCI root bus.  Numbered domains don't
actually properly cover the (non x86) possibilities for multiple PCI root
buses, so this patch for now enforces the domain == 0 restriction in other
places to replace pci_find_root_bus() with an explicit
pci_find_primary_bus().

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-07 23:10:07 +03:00
Paolo Bonzini
0075270317 exec: separate current radix tree from the one being built
This same treatment previously done to phys_node_map and phys_sections
is now applied to the dispatch field of AddressSpace.  Topology updates
use as->next_dispatch while accesses use as->dispatch.

Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:49 +02:00
Paolo Bonzini
89ae337acb exec: move listener from AddressSpaceDispatch to AddressSpace
This will help having two copies of AddressSpaceDispatch during the
recreation of the radix tree (one being built, and one that is complete
and will be protected by RCU).  We do not want to have to unregister and
re-register the listener.

Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:49 +02:00
Paolo Bonzini
c2fc83e83d memory: move MemoryListener declaration earlier
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:49 +02:00
Paolo Bonzini
5444e768ee add a header file for atomic operations
We're already using them in several places, but __sync builtins are just
too ugly to type, and do not provide seqcst load/store operations.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:49 +02:00
Paolo Bonzini
db10ca9057 piolist: add owner argument to initialization functions and pass devices
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:47 +02:00
Paolo Bonzini
3cd2cf4375 pam: pass device to init_pam and use it to set owner
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:47 +02:00
Paolo Bonzini
84af6d9f97 spapr_iommu: pass device to spapr_tce_new_table and use it to set owner
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:47 +02:00
Paolo Bonzini
1b5ec23467 memory: return MemoryRegion from qemu_ram_addr_from_host
It will be needed in the next patch.

Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:46 +02:00
Paolo Bonzini
7443b43758 exec: move qemu_ram_addr_from_host_nofail to cputlb.c
After the next patch it would not be used elsewhere anyway.  Also,
the _nofail and the standard versions of this function return different
things, which is confusing.  Removing the function from the public headers
limits the confusion.

Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:45 +02:00
Paolo Bonzini
dfde4e6e1a memory: add ref/unref calls
Add ref/unref calls at the following places:

- places where memory regions are stashed by a listener and
  used outside the BQL (including in Xen or KVM).

- memory_region_find callsites

- creation of aliases and containers (only the aliased/contained
  region gets a reference to avoid loops)

- around calls to del_subregion/add_subregion, where the region
  could disappear after the first call

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:45 +02:00
Paolo Bonzini
3ce10901ca memory: introduce memory_region_present
This new API will avoid having too many memory_region_ref/unref
in paths that currently use memory_region_find.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:45 +02:00
Paolo Bonzini
46637be269 memory: add ref/unref
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:45 +02:00
Paolo Bonzini
803c0816a7 memory: add getter for owner
Whenever memory regions are accessed outside the BQL, they need to be
preserved against hot-unplug.  MemoryRegions actually do not have their
own reference count; they piggyback on a QOM object, their "owner".
The owner is set at creation time, and there is a function to retrieve
the owner.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:45 +02:00
Paolo Bonzini
2c9b15cab1 memory: add owner argument to initialization functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:44 +02:00
Jan Kiszka
5767e4e198 ioport: Move portio types to ioport.h
This decouples memory.h from ioport.h, concentrating all portio related
types in a single header.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:44 +02:00
Jan Kiszka
d67f679d99 vmport: Disentangle read handler type from portio
In case the latter may vanish one day, make sure the vmport read handler
type will remain unaffected. This is also conceptually cleaner.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:44 +02:00
Jan Kiszka
0659097de2 ioport: Remove unused old dispatching services
Remove unused ioport_register and isa_unassign_ioport along with
everything that only those services used.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:44 +02:00
Jan Kiszka
b40acf99be ioport: Switch dispatching to memory core layer
The current ioport dispatcher is a complex beast, mostly due to the
need to deal with old portio interface users. But we can overcome it
without converting all portio users by embedding the required base
address of a MemoryRegionPortio access into that data structure. That
removes the need to have the additional MemoryRegionIORange structure
in the loop on every access.

To handle old portio memory ops, we simply install dispatching handlers
for portio memory regions when registering them with the memory core.
This removes the need for the old_portio field.

We can drop the additional aliasing of ioport regions and also the
special address space listener. cpu_in and cpu_out now simply call
address_space_read/write. And we can concentrate portio handling in a
single source file.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:44 +02:00
Jan Kiszka
b6f3296292 isa: implement isa_is_ioport_assigned via memory_region_find
Open-code isa_is_ioport_assigned via a memory region lookup. As all IO
ports are now directly or indirectly registered via the memory API, this
becomes possible and will finally allow us to drop the ioport tables.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:43 +02:00
Jan Kiszka
8ab9b41876 Privatize register_ioport_read/write
No more users outside of ioport.c.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:43 +02:00
Paolo Bonzini
f487b677c2 dma: keep a device alive while it has SGLists
Reviewed-by: Anthony Liguori <aliguori@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:30 +02:00
David Gibson
6ac363b50c pci: Move pci_read_devaddr to pci-hotplug-old.c
pci_read_devaddr() is only used by the legacy functions for the old PCI
hotplug interface in pci-hotplug-old.c.  So we move the function there,
and make it static.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-04 10:45:31 +03:00
Michael S. Tsirkin
bc3e6a0d6c pvpanic: initialization cleanup
Avoid use of static variables: PC systems
initialize pvpanic device through pvpanic_init,
so we can simply create the fw_cfg file at that point.
This also makes it possible to skip device
creation completely if fw_cfg is not there, e.g. for xen -
so the ports it reserves are not discoverable by guests.

Also, make pvpanic_init void since callers ignore return
status anyway.

Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paul Durrant <Paul.Durrant@citrix.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-04 10:42:51 +03:00
Michael S. Tsirkin
f8c457b88d pc: pass PCI hole ranges to Guests
Guest currently has to jump through lots of hoops to guess the PCI hole
ranges.  It's fragile, and makes us change BIOS each time we add a new
chipset.  Let's report the window in a ROM file, to make BIOS do exactly
what QEMU intends.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-04 10:40:56 +03:00
Michael S. Tsirkin
3459a62521 pci: store PCI hole ranges in guestinfo structure
Will be used to pass hole ranges to guests.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-04 10:40:56 +03:00
Michael S. Tsirkin
620ac82eb0 range: add Range structure
Sometimes we need to pass ranges around, add a
handy structure for this purpose.

Note: memory.c defines its own concept of AddrRange structure for
working with 128 addresses.  It's necessary there for doing range math.
This is not needed for most users: struct Range is
much simpler, and is only used for passing the range around.

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-04 10:40:56 +03:00
Paolo Bonzini
6046c62086 int128: optimize and add test cases
For add, the carry only requires checking one of the arguments.
For sub and neg, we can similarly optimize computation of the
carry.

For ge, we can just do lexicographic order.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-02 08:17:01 +02:00
Alexander Graf
a1014f25ef PPC: Add clock-frequency export for Mac machines
Support in fwcfg has been around for exposure of the clock-frequency
CPU property. OpenBIOS reads it, we just never exposed it.

Since Mac OS X is very picky about its clock frequency values, let's
just take a known good value and always expose that.

Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-01 01:11:17 +02:00
Anthony Liguori
210b580b10 spapr-rtas: add CPU argument to RTAS calls
RTAS is a hypervisor provided binary blob that a guest loads and
calls into to execute certain functions.  It's similar to the
vsyscall page in Linux or the short lived VMCI paravirt interface
from VMware.

The QEMU implementation of the RTAS blob is simply a passthrough
that proxies all RTAS calls to the hypervisor via an hypercall.

While we pass a CPU argument for hypercall handling in QEMU, we
don't pass it for RTAS calls.  Since some RTAs calls require
making hypercalls (normally RTAS is implemented as guest code) we
have nasty hacks to allow that.

Add a CPU argument to RTAS call handling so we can more easily
invoke hypercalls just as guest code would.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-01 01:11:16 +02:00
Andreas Färber
dd49c038c3 intc/openpic_kvm: Fix QOM and build issues
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-01 01:11:15 +02:00
Andreas Färber
e1766344fd intc/openpic: QOM'ify
Introduce type constant and cast macro.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-01 01:11:14 +02:00
Scott Wood
d85937e683 kvm/openpic: in-kernel mpic support
Enables support for the in-kernel MPIC that thas been merged into the
KVM next branch.  This includes irqfd/KVM_IRQ_LINE support from Alex
Graf (along with some other improvements).

Note from Alex regarding kvm_irqchip_create():

  On x86, one would call kvm_irqchip_create() to initialize an
  in-kernel interrupt controller.  That function then goes ahead and
  initializes global capability variables as well as the default irq
  routing table.

  On ppc, we can't call kvm_irqchip_create() because we can have
  different types of interrupt controllers.  So we want to do all the
  things that function would do for us in the in-kernel device init
  handler.

Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: squash in kvm_irqchip_commit_routes patch, fix non-kvm build,
        fix ppcemb]
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-01 01:11:14 +02:00
Alexander Graf
cb925cf923 KVM: PIC: Only commit irq routing when necessary
The current logic updates KVM's view of our interrupt map every time we
change it. While this is nice and bullet proof, it slows things down
badly for me. QEMU spends about 3 seconds on every start telling KVM what
news it has on its routing maps.

Instead, let's just synchronize the whole irq routing map as a whole when
we're done constructing it. For things that change during runtime, we can
still update the routing table on demand.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-01 01:11:14 +02:00
Scott Wood
8935a442cd openpic: factor out some common defines into openpic.h
...for use by the KVM in-kernel irqchip stub.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-01 01:11:14 +02:00
Alexander Graf
7b7745930b KVM: Export kvm_init_irq_routing
On PPC, we can have different types of interrupt controllers, so we really
only know that we are going to use one when we created it.

Export kvm_init_irq_routing() to common code, so that we don't have to call
kvm_irqchip_create().

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-01 01:11:14 +02:00
Alexander Graf
215e79c01c KVM: Don't assume that mpstate exists with in-kernel PIC always
On PPC, we don't support MP state. So far it's not necessary and I'm
not convinced yet that we really need to support it ever.

However, the current idle logic in QEMU assumes that an in-kernel PIC
also means we support MP state. This assumption is not true anymore.

Let's split up the two cases into two different variables. That way
PPC can expose an in-kernel PIC, while not implementing MP state.

Signed-off-by: Alexander Graf <agraf@suse.de>
CC: Jan Kiszka <jan.kiszka@siemens.com>
2013-07-01 01:11:13 +02:00