While we can store constants via constrants on INDEX_op_st_i32 et al,
we weren't able to spill constants to backing store.
Add a new backend interface, tcg_out_sti, which may store the constant
(and is allowed to fail). Rearrange the temp_* helpers so that we only
attempt to directly store a constant when the temp is becoming dead/free.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Briefly describe in a comment how direct block chaining is done. It
should help in understanding of the following data fields.
Rename some fields in TranslationBlock and TCGContext structures to
better reflect their purpose (dropping excessive 'tb_' prefix in
TranslationBlock but keeping it in TCGContext):
tb_next_offset => jmp_reset_offset
tb_jmp_offset => jmp_insn_offset
tb_next => jmp_target_addr
jmp_next => jmp_list_next
jmp_first => jmp_list_first
Avoid using a magic constant as an invalid offset which is used to
indicate that there's no n-th jump generated.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Check for CONFIG_DEBUG_TCG instead of NDEBUG, drop now useless code.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 1461228530-14852-2-git-send-email-aurelien@aurel32.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The TCG code is quite performance sensitive, but at the same time can
also be quite tricky. That is why asserts that can be enabled with the
--enable-debug-tcg configure option.
This used to work the following way:
| #include "config.h"
|
| ...
|
| #if !defined(CONFIG_DEBUG_TCG) && !defined(NDEBUG)
| /* define it to suppress various consistency checks (faster) */
| #define NDEBUG
| #endif
|
| ...
|
| #include <assert.h>
Since commit 757e725b (tcg: Clean up includes) "config.h" as been
replaced by "qemu/osdep.h" which itself includes <assert.h>. As a
consequence the assertions are always enabled, even when using
--disable-debug-tcg, causing a performance regression, especially on
targets with many registers. For instance on qemu-system-ppc the
speed difference is about 15%.
tcg_debug_assert is controlled directly by CONFIG_DEBUG_TCG and already
uses in some places. This patch replaces all the calls to assert into
calss to tcg_debug_assert.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 1461228530-14852-1-git-send-email-aurelien@aurel32.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename the per-architecture tcg-target.c files to tcg-target.inc.c.
This makes it clearer that they are not intended to be standalone
C files, but are instead #included into another source file.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1456238983-10160-2-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Undo the workaround at b17a6d3390.
If there are lots of memory operations in a TB, the slow path code
can exceed the highwater reservation. Add a check within the loop.
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
As we have removed CONFIG_USE_GUEST_BASE, we always use a guest base
and the macros GUEST_BASE and RESERVED_VA become useless: replace
them by their values.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440420834-8388-1-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
All tcg host architectures now support the guest base and as
there is no real performance lost, it can be always enabled.
Anyway, guest base use can be disabled lively by setting guest
base to 0.
CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY),
it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY
parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to
use !CONFIG_SOFTMMU instead.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Rather than allow arbitrary shift+trunc, only concern ourselves
with low and high parts. This is all that was being used anyway.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Implement real ext_i32_i64 and extu_i32_i64 ops. They ensure that a
32-bit value is always converted to a 64-bit value and not propagated
through the register allocator or the optimizer.
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Stefan Weil <sw@weilnetz.de>
Acked-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The op is sometimes named trunc_shr_i32 and sometimes trunc_shr_i64_i32,
and the name in the README doesn't match the name offered to the
frontends.
Always use the long name to make it clear it is a size changing op.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This will be used to size the TLB when more than 8 MMU modes are
used by the target. Limitations come from the limited size of
the immediate fields (which sometimes, as in the case of Aarch64,
extend to instructions that shift the immediate).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1424436345-37924-2-git-send-email-pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The extra information is not yet used but it is now available.
This requires minor changes through all of the tcg backends.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
At the tcg opcode level, not at the tcg-op.h generator level.
This requires minor changes through all of the tcg backends,
but none of the cpu translators.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This is less about improved type checking than enabling a
subsequent change to the representation of labels.
Acked-by: Claudio Fontana <claudio.fontana@huawei.com>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since all backends have been converted, remove the compatibility code.
Acked-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The INDEX_op_call case has just been obsoleted; the mov and movi
cases have not been reachable for years. Attempt to document this
both in each tcg_out_op switch, and via TCG_OPF_NOT_PRESENT.
Because of the TCG_OPF_NOT_PRESENT change, this must be done for
all targets in a single commit.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Using a 16-byte aligned structure achieves best results, both for code
cleanliness and compiled code size. However, this means that we can't
use the trick of encoding the slot number into the low 2 bits.
Thankfully, we only ever use slot2, so make that explicit in the names
of the relocation functions, and drop the code for other slots.
Signed-off-by: Richard Henderson <rth@twiddle.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTVthUAAoJEK0ScMxN0Ceb5OUH/0Ri4engOQim3mV1jAOr2Vca
3zg+Hl8b+UioXD0se24Iipr6s+02G1DApbbLPX7DZAnoh9jEBvDtHOdde3pNbMkQ
jcTpShTyT7OKSsklRN19ckvk0ffBch5W3Ekkw6/Hg6ys2HIvirRpEL6R58oJNlP6
xcCkQZISZVkakbv5xft8YQo1v8wnU5q2l85OaC1aaDB6g+Y6ZgoA1qkWjqlHkmQk
1asflfbC0r5ke+yx7vz6310f5xBDLSVv17dqsDUr70o1m/6bem6wQXMczwmYUfk5
99OCPiqdiCZLJyVFvIvfwSakL9Bq/nvnmywXTkrB7rovk5VZz3gc4sJkuUkL+KM=
=URV1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/tcg-next-20140422' into staging
Pull tcg 2014-04-22
# gpg: Signature made Tue 22 Apr 2014 22:00:04 BST using RSA key ID 4DD0279B
# gpg: Can't check signature: public key not found
* remotes/rth/tags/tcg-next-20140422:
tcg: Use HOST_WORDS_BIGENDIAN
tcg: Fix fallback from muls2_i64 to mulu2_i64
tcg: Use tcg_gen_mulu2_i32 in tcg_gen_muls2_i32
tcg: Relax requirement for mulu2_i32 on 32-bit hosts
tcg-s390: Remove W constraint
tcg-sparc: Use the type parameter to tcg_target_const_match
tcg-ppc64: Use the type parameter to tcg_target_const_match
tcg-aarch64: Remove w constraint
tcg: Add TCGType parameter to tcg_target_const_match
tcg: Fix out of range shift in deposit optimizations
tci: Mask shift counts to avoid undefined behavior
tcg: Mask shift quantities while folding
tcg: Use "unspecified behavior" for shifts
tcg: Fix warning (1 bit signed bitfield entry) and replace int by bool
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most 64-bit targets need to be able to ignore the high bits
of a TCG_TYPE_I32 value.
Suggested-by: Stuart Brady <sdb@zubnet.me.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Still inline, but updated to the new routines. Always use the LE
helpers, reusing the bswap between the fast and slot paths.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This sequencing requires 5 stop bits instead of 6, and has room left
over to pre-load the tlb addend, and bswap data prior to being stored.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Being able to "extend" from 64-bits (with a mov) simplifies
a few places where the conditional breaks the train of thought.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can and/or/xor/andcm small constants, saving one cycle.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can subtract from more small constants that just 0 with one insn,
and we can add the negative for most small constants.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Avoids a wasted cycle loading up small constants.
Simplify the code assuming the tcg optimizer is going to work
and don't expect the first operand of the add to be constant.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
When performing an operation with two input registers, we'd leave
the stop bit (and thus an extra cycle) that's only needed when one
or the other input is a constant.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since the move away from the global areg0, we're no longer globally
reserving areg0. Which means our use of R7 clobbers a call-saved
register. Shift areg0 into the windowed registers. Indeed, choose
the incoming parameter register that it comes to us by.
This requires moving the register holding the return address elsewhere.
Choose R33 for tidiness.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There was a misconception that a stop bit is required between a compare
and the branch that uses the predicate set by the compare. This lead to
the usage of an extra bundle in which to perform the compare. The extra
bundle left room for constants to be loaded for use with the compare insn.
If we pack the compare and the branch together in the same bundle, then
there's no longer any room for non-zero constants. At which point we
can eliminate half the function by not handling them.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Using only indirect calls results in 3 bundles (one to load the
descriptor address), and 4 stop bits. By looking through the
descriptor to the constants, we can perform the call with 2
bundles and only 1 stop bit.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There's no need to go through the full opcode-to-insn function call
to generate nops. This makes the source a bit more readable.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Step two in the transition, adding the new ldst opcodes. Keep the old
opcodes around until all backends support the new opcodes.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This is a no-op backend data implementation, for those targets that
are not currently using the load/store optimization path.
This is prepatory to always requiring these functions in all backends.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The _cmmu helpers can be moved to exec-all.h. The helpers that are
used from TCG will shortly need access to tcg_target_long so move
their declarations into tcg.h.
This requires minor include adjustments to all TCG backends.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
