This patch introduce ECAP_PASID via "x-pasid-mode". Based on the
existing support for scalable mode, we need to implement the following
missing parts:
1) tag VTDAddressSpace with PASID and support IOMMU/DMA translation
with PASID
2) tag IOTLB with PASID
3) PASID cache and its flush
4) PASID based IOTLB invalidation
For simplicity PASID cache is not implemented so we can simply
implement the PASID cache flush as a no and leave it to be implemented
in the future. For PASID based IOTLB invalidation, since we haven't
had L1 stage support, the PASID based IOTLB invalidation is not
implemented yet. For PASID based device IOTLB invalidation, it
requires the support for vhost so we forbid enabling device IOTLB when
PASID is enabled now. Those work could be done in the future.
Note that though PASID based IOMMU translation is ready but no device
can issue PASID DMA right now. In this case, PCI_NO_PASID is used as
PASID to identify the address without PASID. vtd_find_add_as() has
been extended to provision address space with PASID which could be
utilized by the future extension of PCI core to allow device model to
use PASID based DMA translation.
This feature would be useful for:
1) prototyping PASID support for devices like virtio
2) future vPASID work
3) future PRS and vSVA work
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-5-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to have a macro for VTD_PE_GET_FPD_ERR() but it has an
internal goto which prevents it from being reused. This patch convert
that macro to a dedicated function and let the caller to decide what
to do (e.g using goto or not). This makes sure it can be re-used for
other function that requires fault reporting.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-4-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
We introduce VTDBus structure as an intermediate step for searching
the address space. This works well with SID based matching/lookup. But
when we want to support SID plus PASID based address space lookup,
this intermediate steps turns out to be a burden. So the patch simply
drops the VTDBus structure and use the PCIBus and devfn as the key for
the g_hash_table(). This simplifies the codes and the future PASID
extension.
To prevent being slower for past vtd_find_as_from_bus_num() callers, a
vtd_as cache indexed by the bus number is introduced to store the last
recent search result of a vtd_as belongs to a specific bus.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-3-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
We use to warn on wrong rid2pasid entry. But this error could be
triggered by the guest and could happens during initialization. So
let's don't warn in this case.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
- Move the implement vfio_get_xlat_addr to softmmu/memory.c, and
change the name to memory_get_xlat_addr(). So we can use this
function on other devices, such as vDPA device.
- Add a new function vfio_get_xlat_addr in vfio/common.c, and it will check
whether the memory is backed by a discard manager. then device can
have its own warning.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221031031020.1405111-2-lulu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since the patchset ("Build ACPI Heterogeneous Memory Attribute Table (HMAT)"),
HMAT is supported, but only x86 is enabled. Enable HMAT on arm virt machine.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221027100037.251-7-hesham.almatary@huawei.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Message-Id: <20221027100037.251-6-hesham.almatary@huawei.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
.. which will be used by follow up hmat-noinitiator test-case.
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Message-Id: <20221027100037.251-3-hesham.almatary@huawei.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The code currently assumes Q35 iff ICH9 and i440fx iff PIIX. Now that more
AML generation has been moved into the south bridges and since the
machines define themselves primarily through their north bridges, let's
switch to resolving the north bridges for AML generation instead. This
also allows for easier experimentation with different south bridges in
the "pc" machine, e.g. with PIIX4 and VT82xx.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221028103419.93398-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The is_piix4 attribute is set once in one location and read once in
another. Doing both in one location allows for removing the attribute
altogether.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221026133110.91828-3-shentey@gmail.com>
Message-Id: <20221028103419.93398-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ammends commit b23046abe7 'pc: acpi-build:
simplify PCI bus tree generation'.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221026133110.91828-2-shentey@gmail.com>
Message-Id: <20221028103419.93398-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Early-boot e820 records will be inserted by the bios/efi/early boot
software and be reported to the kernel via insert_resource. Later, when
CXL drivers iterate through the regions again, they will insert another
resource and make the RESERVED memory area a child.
This RESERVED memory area causes the memory region to become unusable,
and as a result attempting to create memory regions with
`cxl create-region ...`
Will fail due to the RESERVED area intersecting with the CXL window.
During boot the following traceback is observed:
0xffffffff81101650 in insert_resource_expand_to_fit ()
0xffffffff83d964c5 in e820__reserve_resources_late ()
0xffffffff83e03210 in pcibios_resource_survey ()
0xffffffff83e04f4a in pcibios_init ()
Which produces a call to reserve the CFMWS area:
(gdb) p *new
$54 = {start = 0x290000000, end = 0x2cfffffff, name = "Reserved",
flags = 0x200, desc = 0x7, parent = 0x0, sibling = 0x0,
child = 0x0}
Later the Kernel parses ACPI tables and reserves the exact same area as
the CXL Fixed Memory Window:
0xffffffff811016a4 in insert_resource_conflict ()
insert_resource ()
0xffffffff81a81389 in cxl_parse_cfmws ()
0xffffffff818c4a81 in call_handler ()
acpi_parse_entries_array ()
(gdb) p/x *new
$59 = {start = 0x290000000, end = 0x2cfffffff, name = "CXL Window 0",
flags = 0x200, desc = 0x0, parent = 0x0, sibling = 0x0,
child = 0x0}
This produces the following output in /proc/iomem:
590000000-68fffffff : CXL Window 0
590000000-68fffffff : Reserved
This reserved area causes `get_free_mem_region()` to fail due to a check
against `__region_intersects()`. Due to this reserved area, the
intersect check will only ever return REGION_INTERSECTS, which causes
`cxl create-region` to always fail.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Message-Id: <20221026205912.8579-1-gregory.price@memverge.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There were several different ways to deal with the situation where the
vector specified for a msix function is out of bound:
- early return a function and keep progresssing
- propagate the error to the caller
- mark msix unusable
- assert it is in bound
- just ignore
An out-of-bound vector should not be specified if the device
implementation is correct so let msix functions always assert that the
specified vector is in range.
An exceptional case is virtio-pci, which allows the guest to configure
vectors. For virtio-pci, it is more appropriate to introduce its own
checks because it is sometimes too late to check the vector range in
msix functions.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20220829083524.143640-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Signed-off-by: Akihiko Odaki <<a href="mailto:akihiko.odaki@daynix.com" target="_blank">akihiko.odaki@daynix.com</a>><br>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221020120458.80709-1-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
- Fix memset argument order: The second argument is
the value, the length goes last.
- Fix an integer overflow reported by Alexander Bulekov.
Both issues allow the guest to overrun the host buffer
allocated for the ERST memory device.
Cc: Eric DeVolder <eric.devolder@oracle.com
Cc: Alexander Bulekov <alxndr@bu.edu>
Cc: qemu-stable@nongnu.org
Fixes: f7e26ffa59 ("ACPI ERST: support for ACPI ERST feature")
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Message-Id: <20221024154233.1043347-1-lk@c--e.de>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1268
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move _GPE block declaration before it gets referenced by other
hotplug handlers. While at it move PCI hotplug (_E01) handler
after PCI tree description to avoid forward reference to
to not yet declared methods/devices.
PS:
Forward 'usage' usualy is fine as long as it's hidden within
method, however 'iasl' may print warnings. So be nice
to iasl/guest OS and do things in proper order.
PS2: Also follow up patches will move some of hotplug code
from PCI tree to _E01 and that also requires PCI Device
nodes build first, before Scope can reuse that from
global context.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
to make that happen (bridge sits at _ADR: 0x001F0003),
relax PCI enumeration logic to include devices with *function* > 0
if device has something to say about itself (i.e. has build_dev_aml
callback set).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It will be used in followup commits to figure out if
device has it's own, device specific AML block.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI-ISA bridges that are built in PIIX/Q35 are building its own AML
using AcpiDevAmlIf interface. Now build_append_pci_bus_devices()
gained AcpiDevAmlIf interface support to get AML of devices atached
to PCI slots.
So drop ad-hoc build_q35_isa_bridge()/build_piix4_isa_bridge()
and let PCI bus enumeration to include PCI-ISA bridge AML
when it's enumerated by build_append_pci_bus_devices().
AML change is mostly contextual, which moves whole ISA hierarchy
directly under PCI host bridge instead of it being described
as separate \SB.PCI0.ISA block.
Note:
If bus/slot that hosts ISA bridge has BSEL set, it will gain new
ASUN and _DMS entries (i.e. acpi-index support, but it should not
cause any functional change and that is fine from PCI Firmware
spec point of view), potentially it's possible to suppress that
by adding a flag to PCIDevice but I don't see a reason to do that
yet, I'd rather treat bridge just as any other PCI device if it's
possible.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
NB:
We do not expect any functional change in any ACPI tables with this
change. It's only a refactoring.
NB2:
Some targets (or1k) do not support acpi and CONFIG_ACPI is off for them.
However, modules are reused between all architectures so CONFIG_ACPI is
on. For those architectures, dummy stub function definitions help to
resolve symbols. This change uses more of these and so it adds a couple
of dummy stub definitions so that symbols for those can be resolved.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
CC: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221107152744.868434-1-ani@anisinha.ca>
vhost backend sends host notification for every VQ. If backend creates
VQs in parallel, the VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG may
arrive to QEMU in different order than incremental queue index order.
For example VQ 1's message arrive earlier than VQ 0's:
After alloc VhostUserHostNotifier for VQ 1. GPtrArray becomes
[ nil, VQ1 pointer ]
After alloc VhostUserHostNotifier for VQ 0. GPtrArray becomes
[ VQ0 pointer, nil, VQ1 pointer ]
This is wrong. fetch_notifier will return NULL for VQ 1 in
vhost_user_get_vring_base, causes host notifier miss removal(leak).
The fix is to remove current element from GPtrArray, make the right
position for element to insert.
Fixes: 503e355465 ("virtio/vhost-user: dynamically assign VhostUserHostNotifiers")
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20221018023651.1359420-1-yajunw@nvidia.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Most other virtio-pci devices allow MSI-X, let's have it for rng too.
Signed-off-by: David Daney <david.daney@fungible.com>
Reviewed-by: Marcin Nowakowski <marcin.nowakowski@fungible.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@fungible.com>
Message-Id: <20221014160947.66105-1-philmd@fungible.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add virtqueue reset feature for virtio-net
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20221017092558.111082-16-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add virtqueue reset feature for vhost-kernel.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-15-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support queue_enable in vhost-kernel scenario. It can be called when
a vq reset operation has been performed and the vq is restared.
It should be noted that we can restart the vq when the vhost has
already started. When launching a new vhost device, the vhost is not
started and all vqs are not initalized until VIRTIO_PCI_COMMON_STATUS
is written. Thus, we should use vhost_started to differentiate the
two cases: vq reset and device start.
Currently it only supports vhost-kernel.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-14-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-net and vhost-kernel implement queue reset.
Queued packets in the corresponding queue pair are flushed
or purged.
For virtio-net, userspace datapath will be disabled later in
__virtio_queue_reset(). It will set addr of vring to 0 and idx to 0.
Thus, virtio_net_receive() and virtio_net_flush_tx() will not receive
or send packets.
For vhost-net, the datapath will be disabled in vhost_net_virtqueue_reset().
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-13-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the fucntion flush_or_purge_queued_packets(), it will be
used in device reset and virtqueue reset. Therefore, we extract the
common logic as a new function.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-12-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vhost_net_virtqueue_restart(), which can restart the
specific virtqueue when the vhost net started running before.
If it fails to restart the virtqueue, the device will be stopped.
Here we do not reuse vhost_net_start_one() or vhost_dev_start()
because they work at queue pair level. The mem table and features
do not change, so we can call the vhost_virtqueue_start() to
restart a specific queue.
This patch only considers the case of vhost-kernel, when
NetClientDriver is NET_CLIENT_DRIVER_TAP.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-11-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vhost_virtqueue_reset(), which can reset the specific
virtqueue in the device. Then it will unmap vrings and the desc
of the virtqueue.
Here we do not reuse the vhost_net_stop_one() or vhost_dev_stop(),
because they work at queue pair level. We do not use
vhost_virtqueue_stop() because it may stop the device in the
backend.
This patch only considers the case of vhost-kernel, when
NetClientDriver is NET_CLIENT_DRIVER_TAP.
Furthermore, we do not need net->nc->info->poll() because
it enables userspace datapath and we want to stop all
datapaths for this reset virtqueue here.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-10-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose vhost_virtqueue_stop(), we need to use it when resetting a
virtqueue.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-9-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose vhost_virtqueue_start(), we need to use it when restarting a
virtqueue.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-8-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI devices support device specific vq enable.
Based on this function, the driver can re-enable the virtqueue after the
virtqueue is reset.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-7-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI devices support vq reset.
Based on this function, the driver can adjust the size of the ring, and
quickly recycle the buffer in the ring.
The migration of the virtio devices will not happen during a reset
operation. This is becuase the global iothread lock is held. Migration
thread also needs the lock. As a result, when migration of virtio
devices starts, the 'reset' status of VirtIOPCIQueue will always be 0.
Thus, we do not need to add it in vmstate_virtio_pci_modern_queue_state.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-6-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A a new command line parameter "queue_reset" is added.
Meanwhile, the vq reset feature is disabled for pre-7.2 machines.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-5-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the interface queue_enable() in VirtioDeviceClass and the
fucntion virtio_queue_enable() in virtio, it can be called when
VIRTIO_PCI_COMMON_Q_ENABLE is written and related virtqueue can be
started. It only supports the devices of virtio 1 or later. The
not-supported devices can only start the virtqueue when DRIVER_OK.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-4-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a new interface function virtio_queue_reset() to implement
reset for vq.
Add a new callback to VirtioDeviceClass for queue reset operation for
each child device.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-3-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Separate the logic of vq reset. This logic will be called directly
later.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-2-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In theory the virtio-iommu-pci could be plugged anywhere in the PCIe
topology and as long as the dt/acpi info are properly built this should
work. However at the moment we fail to do that because the
virtio-iommu-pci BDF is not computed at plug time and in that case
vms->virtio_iommu_bdf gets an incorrect value.
For instance if the virtio-iommu-pci is plugged onto a pcie root port
and the virtio-iommu protects a virtio-block-pci device the guest does
not boot.
So let's do not pretend we do support this case and fail the initialize()
if we detect the virtio-iommu-pci is plugged anywhere else than on the
root bus. Anyway this ability is not needed.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221012163448.121368-1-eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This Data Object Exchange Mailbox allows software to query the
latency and bandwidth between ports on the switch. For now
only provide information on routes between the upstream port and
each downstream port (not p2p).
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
--
Changes since v8: Mostly to match the type 3 equivalent
- Move enum out of function and give it a more descriptive namespace.
Message-Id: <20221014151045.24781-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
